Misplaced Pages

#639360

100-650: Chalford is a large village in the Frome Valley of the Cotswolds in Gloucestershire , England. It is to the southeast of Stroud about four miles (six kilometres) upstream. It gives its name to Chalford parish , which covers the villages of Chalford, Chalford Hill, France Lynch, Bussage and Brownshill , spread over two square miles (five square kilometres) of the Cotswold countryside. At this point

200-455: A grade II* listed house with park and garden, which was begun by Sir William Sandys in 1620, and remodelled in the 20th century by Edwin Lutyens after fire damage in 1919. The Frome continues to meander its way south passing the site of Edgeworth Mill and forming the western boundary of Pinbury Park, a wooded area containing early 20th century terraced gardens and a country house dating from

300-565: A brass band, and the site expanded, using other mill buildings and new buildings erected after a fire occurred in 1888. By 1876, 1,0006 people were employed at Bliss Mill, and an internal tramway was used to move materials around the site. Water power was replaced by steam power, when a 46 hp (34 kW) engine was obtained from a manufacturer in Gloucester. Other companies also made sticks, including Hoopers at Griffin Mill, which lasted until

400-531: A bridge form a group of listed buildings, which are complemented by Fromehall Mills, immediately downstream. The main building dates from the early 19th century, but some of the other buildings date from the 17th and 18th centuries. The river continues under the A419/A46 roundabout at Dudbridge and is joined by the Nailsworth Stream, flowing northwards from Avening and Nailsworth . Just before

500-421: A community plan to reintroduce donkeys as a way of carrying shopping up the steep, narrow hills became public. On 5 September 2009 Chalford Community Stores allowed customers to purchase shares in the business. The store, which has been running with the aid of a volunteer workforce since 2003, is now affiliated with the independent organisation Co-operatives UK, making the share issue possible. On 4 March 2012

600-463: A floodplain, and the channel splits into two, which reunite at Churchend. Large parts of this final section are embanked, to protect low lying land from flooding. The Frome rises from several springs at Nettleton (about a mile southeast of Birdlip ) and in springs at Climperwell Farm (southwest of Brimpsfield ). The two branches meet just south of Caudle Green and Syde in Miserden Park,

700-420: A group with Leonard Stanley House, once the mill owner's house dating from 1800 and 1830 but now converted into three houses, and Splash Cottage, built for the mill manager in the late 18th century. Millend Mill was one of three built by the clothier Henry Hicks in the parish of Eastington between 1790 and 1820, this one occupying the site of a 14th century mill. It had been converted to a corn mill by 1939, and

800-780: A length of this watershed feeding into the River Thames to the east (via the River Churn ) and the Severn to the West (via the Frome). There were several plans to make the Frome navigable, the first occurring between 1697 and 1700, for a scheme to upgrade the river from the Severn to Stroud. It would bring coal to the flourishing woollen industry, and carry away their finished products, but

900-682: A main river, as classified by the Environment Agency . It inhabits a steep-sided narrow valley, which it shares in the upper reaches with the Thames and Severn Canal and the Golden Valley line railway. It flows to the north to reach Stroud and then to the west again to Ebley Mill , where there is a gauging station to measure its flow. Below Stroud, it shares its course with the Stroudwater Navigation , which with

1000-438: A main river, because three of the tributaries of the Frome were diverted into them in the 1950s as part of a flood prevention scheme. Despite the number of historical weirs and modern flood defence structures, the river is not classified as heavily modified, although the modification of its channel, together with the volume of water abstracted to supply the canals and for the drinking water industry , means that its water quality

1100-430: A narrow strip of land between them. To improve the capacity of the river channel, the intervening strip of land was removed, and bulldozed into the southern side of the canal. This produced a much wider channel for the river, consisting of the original channel together with the northern side of the canal. With funding for the reinstatement of the canal approved, this section should be navigable by late 2023, and will involve

SECTION 10

#1732783812640

1200-447: A plan to enlarge and straighten the river, with some new cuts, and the locks were probably to be flash locks , with a single gate. Commissioners were appointed, but the scheme languished, with a growing feeling that making the river navigable was not possible because of the large number of mills. One of the commissioners, John Dallaway, did not let the idea drop, and proposed a new scheme in 1754, running for 9.5 miles (15.3 km) from

1300-673: A population of under 6,000. Aid was received from the London committee for the relief of manufacturing districts. They were further affected in the 1830s, when the East India Company ceased trading, and a lucrative market in 'stripe' cloth with China consequently disappeared. Some people emigrated, to New South Wales in Australia, to Yorkshire and to Shrewsbury , but few of the cloth mills in Chalford survived, and they turned to

1400-472: A private garden. The river continues through the Griffin Mill estate to reach Stafford Mills. At Bowbridge a 19th century dye works, now used as a warehouse by Orchard and Peers is all that remains of Bowbridge Mill. The millpond for Arundell Mill still exists, and the associated 17th century dye works has become a carpenter's shop and a cottage. The canal crosses to the north side of the river, and

1500-488: A resident of Daneway, used the wood to produce chairs, a process which was aided by a water-powered pole lathe. When the saw mill closed in 1914-15, the steam engine was sold on to a mill at Shipton Moyne near Tetbury . When the Domesday Book was compiled in 1086, the manor of Bisley, which included the villages of Chalford and Stroud, had five mills. Three mills were recorded in Chalford in 1170, all belonging to

1600-487: A result of the large number of mills built along its length, and this can be seen in the number of splits where the river follows two parallel channels. There is also evidence of man-made channels, sections where the channel is perched higher than the surrounding land, and the remains of former channels. Between Whitminster and the hamlet of Wheatenhurst, the river and the Stroudwater Navigation were on

1700-407: A semi-circle around the site of Wallbridge Mills, where the two-storey Wallbridge Mill Printing Department still stands, the building dating from the 18th century. The A46 Bath Road crosses before the river reaches Lodgemoor Mills, rebuilt in 1871-73 to the designs of James Ferrabee, an architect from Brimscombe, after a fire destroyed the previous mill, dating from 1815. Nearby offices, cottages and

1800-405: A similar level, and the canal entered the river to cross from its north side to its south side at Whitminster lock. However, this arrangement proved to be unsatisfactory, since the river powered Whitminster Mill, and consequently river levels varied depending on how much water the mill was using, making navigation unreliable. The canal company built a new channel, and the river passed under it through

1900-485: A viaduct carries the railway over the river and Dr Newton's Way, a bypass built over the course of the canal, which now has its own bypass around the road. Beyond the viaduct is Stroud railway station . The narrow strip of land bordering the river to the south of the bypass is managed as Frome Banks nature reserve. It is owned by the county council, but day to day management is the responsibility of Gloucestershire Wildlife Trust and Stroud Valleys Project. The river loops in

2000-436: Is a detached three-storey house dating from the late 17th century, with two-storey additions made in 1730, which was part of Iles's Mill. Both the river and canal are crossed by the railway, which moves to the north side of the valley. To the west is St Mary's Mill, build in 1820 for Samuel Clutterbuck. Nearby is St Mary's House, built for the mill owner in the late 16th century, and several weavers' cottages, some dating from

2100-545: Is abstracted from the canal near Sharpness, and treated by Bristol Water 's Purton Treatment Works. Work on the Purton site began on 24 August 1970, and a 46-inch (1.2 m) pipeline was constructed to carry the treated water to Pucklechurch service reservoir, 17.8 miles (28.6 km) away. The project cost £8.8 million and provided a new water supply for Bristol, with the works commencing operation in April 1973. The route of

SECTION 20

#1732783812640

2200-640: Is fed by the Slad Brook and the Painswick stream. Changes to water drainage to reduce flooding, carried out by the Severn River Board in 1957 and 1958, resulted in the Ruscombe or Randwick brook discharging into the canal route instead of passing under it through a siphon beneath Foundry Lock. The Stroudwater Navigation runs parallel to the Frome for most of its length westwards from Stroud, and

2300-649: Is home to the Monastery of Our Lady and St Bernard, a community of eight Bernardine Cistercian nuns. There is a sister community at the Monastery of Our Lady of Hyning at Warton , near Carnforth . St Mary of the Angels is a small Roman Catholic church built at Brownshill in the 1930s with funds from two former nurses, Bertha Kessler and Katherine Hudson. The architect was W. D. Caroe , with windows by Douglas Strachan . The valley from Chalford to Stroud, known as

2400-544: Is only rated moderate under the terms of the Water Framework Directive , as both factors affect the ability of fish to move freely along the river. The River Frome flows from high up on the Cotswold escarpment in the north east of its catchment, initially heading southwards, and then turning to the west. Just upstream of its junction with the Holy Brook or Holly Brook, at Whitehall Bridge it becomes

2500-584: Is restored to link it back to the Gloucester and Sharpness Canal . Frome Bridge carries the A38 road over the river, which then powered Fromebridge Mill. There has been a mill at the site since the Domesday Book was compiled in 1086, and it has been used for corn, fulling, wire and brass, and the production of animal feed. The present building dates from the late 18th century, with 19th century additions. On

2600-479: Is some 300 yards (270 m) long and could hold 3.25 million imperial gallons (14.8 Ml). In order to ensure it could be filled, the canal company bought Puck's Mill, which was located upstream from its intake. The mill house dates from the 17th century, with a 1960s extension. The river continues westwards to Chalford industrial estate, where it is crossed by the A419 Cowcombe Hill bridge and

2700-490: Is still fed by the river, but that for Hope Mill has been filled in. A trading estate occupies the site of the Phoenix Iron Works, after which is Ham Mill. This consists of a four-storey block dating from the early 19th century, with a three-storey west wing. The pit for the water wheel is thought to be intact within the wing. Nearby are two small bridges dating from the early or mid 18th century, which now stand in

2800-640: Is that of Ebley Corn Mills, where the present three-storey building dates from the early 19th century. Soon afterwards, the river splits into two channels at a series of weirs. The southern branch is crossed by the A419 Ebley bypass, which at this point follows the course of the former Nailsworth Branch of the Midland Railway . A large mill pond lies to the north of the channel, which formerly powered Stanley Mills. The mill building and offices date from 1813, with additional buildings dating from 1825. It

2900-499: Is to the north of the railway track, and consists of a four-storey block with a three-storey block forming an L-shaped plan. Most of it dates from the early 19th century, but one corner was cut off and rebuilt to allow for the construction of the Cheltenham and Great Western Union Railway in 1844, and the east wall appears to have been rebuilt at the same time. Nearby is another small mill building with three storeys, also dating from

3000-557: The Bristol Frome , and the nearby River Frome, Herefordshire . The river is approximately 25 miles (40 km) long. It flows broadly westwards, from its source high up on the Cotswold escarpment, initially through a narrow, steep-sided valley, which it shares with the Thames and Severn Canal and the Golden Valley line railway. Below Stroud , the main town on the river, it is swelled by flows from several tributaries, and

3100-531: The Cotswolds . The Sapperton Valley nature reserve is one of several in the area. The earliest mention of Golden Valley is as a reference in Isaac Taylor 's map, dated 1777; following this, the first reference in literature is found in Samuel Rudder 's 1779 History of Gloucestershire . The Place Names of Gloucestershire (1965) notes that Rudder's is the first written record and also notes that

Chalford - Misplaced Pages Continue

3200-594: The Stroudwater Navigation , a separate canal which followed the route of the river from the River Severn to Wallbridge and opened in 1779. This was later extended through to the River Thames by the construction of the Thames and Severn Canal, which opened in 1789. Both are now part of the Cotswold Canals Trust , and are being restored. A small part of both canals near their junction is classified as

3300-428: The Thames and Severn Canal . (The others are at Coates, Cerney Wick, Marston Meysey and Inglesham.) A notable feature is that access is by way of steps up to the first floor as the ground floor would have originally been stabling for a horse. Apart from a relatively short break in the 1950s when it was a museum it has fulfilled its function as a private residence, which it continues to do to this day. Directly opposite

3400-401: The 16th century. It continues to flow to the south and west past disused mills at Henwood and Dorvel to reach Daneway and Sapperton , where the derelict Thames and Severn Canal emerges from Sapperton tunnel . The canal is initially on the north bank of the river, and runs parallel to the river for most of the rest of its course. Holy Brook, which flows southwards, passes under the canal to join

3500-548: The 17th and 18th centuries brought quality silk and woollen cloth manufacturing to the valley. Some say that they gave their name to the neighbouring village of France Lynch. It is more likely that the name comes from a non-conformist chapel, France Meeting that was displaced from the village in the valley to the Lynches above. At this point the Golden Valley is narrow and deep so many weavers' cottages were built clinging to

3600-438: The Chalford workshop with Waals lasted from five to six years, and apprentices were on trial for three months without pay. One such apprentice was New Age thinker Sir George Trevelyan who died in the bed he made there. Furniture produced during this period now features in exhibitions and catalogues of leading art houses and auction rooms. In 1935 Waals was invited to act as consultant in design at Loughborough College which

3700-657: The Cotswold Canals and for the water industry , reduces its flow, again affecting fish. Like many rivers in the UK, the chemical status changed from good to fail in 2019, due to the presence of polybrominated diphenyl ethers (PBDE), perfluorooctane sulphonate (PFOS), and mercury compounds, none of which had previously been included in the assessment. Download coordinates as: Peter Waals Born in The Hague to Jan van der Waals and Lena Alida Maria Loorij, Peter Waals

3800-464: The Frome bought a 10 hp (7.5 kW) beam engine in 1818. However, many of the mills only saw steam as supplementary power, and continued to rely on water power where they could. St Mary's Mill at Chalford reported that they only used their steam engine in very dry seasons, while William Lewis of Brimscombe had between 60 and 80 hp (45 and 60 kW) of water power, and a steam engine capable of producing 80 hp (60 kW), but only half of

3900-608: The Frome's tributaries were also involved in cloth milling, with seven sites on the Toadsmoor Brook, eleven on Slad Brook, 25 on the Painswick Stream, three on Ruscombe Brook and 30 on Nailswick Stream. The operation of so many mills on a relatively short river required significant engineering skill, both in the design of the channels and of the waterwheels, to gain the maximum amount of power at each site. Upstream mills had smaller amounts of water to play with, but

4000-594: The Golden Valley, is one of Stroud's Five Valleys ; it carries the Stroud-Swindon railway (known informally as the Golden Valley line) and the Thames and Severn Canal towards the Cotswolds . River Frome, Stroud The River Frome , once also known as the Stroudwater , is a small river in Gloucestershire , England. It is to be distinguished from another River Frome in Gloucestershire,

4100-652: The Lockham inverted syphon. The Thames and Severn Canal was abandoned in 1933 and the Stroudwater Navigation ceased to carry any trade in 1941, although it was not formally abandoned until an Act of Parliament was obtained in 1954. Shortly afterwards, the canal channel through Stroud was used as part of a flood relief scheme. The top gates of Lower Wallbridge Lock, Foundry Lock and Dudbridge Lock were replaced by concrete weirs, which maintained water levels at normal flows around 3.3 feet (1.0 m) lower than navigable levels had been. Three streams that formerly passed under

Chalford - Misplaced Pages Continue

4200-528: The Round House is Chalford Place, a Grade II* listed building built on the site of the original home of the de Chalkfordes who are mentioned in documents as early as 1240. The house, formerly known as the Companys Arms, is one of the earlier houses in the valley. Built as a mill owner's house it became an inn in the 19th century. It owed its name Companys Arms to the East India Company for which

4300-403: The Severn to Chippenham Platt, but the works were then abandoned. The boats were too large for the tiny river, the costs were prohibitive, while the difficulties of transferring the goods over 14 walls were likely to be time consuming and damaging to the cargo. By 1774, the art of canal building was much better understood, and an Act of Parliament obtained in 1776 resulted in the construction of

4400-497: The Severn to Wallbridge. It would include 16 locks and four stanks, the precise details of which are unclear, and to prevent it affecting the mill owners, a 2-acre (0.8 ha) reservoir would be built at Wallbridge, which would be filled on Sundays, when the mills were not working. Over half of the money needed was subscribed, but the plan was dropped in 1756, when an alternative was suggested by John Kemmett, Thomas Bridge and two other gentlemen. This would involve building walls beside

4500-496: The Stroudwater Navigation. It was a canal separate from the river, which reached Chippenham Platt at the end of 1777, and was opened to Wallbridge, just under 8 miles (13 km) from the Severn at Familode Lock, on 21 July 1779. Navigation was extended up the valley by the opening of the first part of the Thames and Severn Canal to Brimscombe Port in 1784, and its completion through to the River Thames at Lechlade in 1789. The river channel has undergone significant modification as

4600-402: The Thames and Severn is now part of the Cotswold Canals, which are undergoing restoration. The final section flows to the north-west, although much of its flow is then diverted into the Gloucester and Sharpness Canal to provide a drinking water supply for Bristol . For most of its length, the underlying bedrock is oolitic limestone and liassic sandstone. Below Ebley, the river valley widens into

4700-593: The United States of America. The architectural historian Nikolaus Pevsner called Gimson "the greatest of the English artist-craftsmen." After Gimson's death in 1919 Peter Waals continued to run the Daneway Workshops. By the end of the year he was canvassing potential clients in his own name on Daneway headed paper The following year he was able to set up his own workshop at Halliday's Mill with

4800-400: The advantage that the water was available from early in the morning. Those further downstream had a greater volume of water, but it often did not start to flow until midday, after it had been released by the mills further upstream. The cloth industry was badly affected by a series of depressions from the early 19th century. In 1826, there were 2,026 people unemployed in the Chalford area, out of

4900-466: The area as well as the remains of a Roman Villa . Several of the place names in the area are also Anglo-Saxon in origin. The name Chalford may be derived from Calf ('Way') Ford , or possibly from the Old English cealj , or 'Chalk', and Ford (river crossing point). There were two ancient crossings at Chalford apart from the ford from which the village was named: Stoneford, recorded from

5000-436: The building has fallen down, and the turbine lies buried beneath rubble, which also makes it difficult to understand how the power from the turbine was utilised. The building was L-shaped, and there were two mill ponds, an upper and a lower one. The turbine was fed from the lower one. Dorval Mill was constructed as a grist mill in the early 1760s by Earl Bathurst, who leased it to the miller William Fowler. On Fowler's death, it

5100-417: The canal and river again sharing a channel, with the two parting at Whitminster lock, just upstream of Whitminster weirs. Whitminster Mill had been demolished by 1880. In the early 1970s, the weirs at Whitminster were modified, so that much of the water flowing down the river could be diverted into the remains of the Stroudwater Navigation, and from there into the Gloucester and Sharpness Canal . This water

SECTION 50

#1732783812640

5200-456: The canal were diverted into it: Slad Brook (much of which is culverted under Stroud), Painswick Stream and Ruscombe Brook . Then at Ebley, the canal was joined to the river. As a consequence, this part of the canal is classed as a "main river". As this section of the canal has now been restored and the locks put back into use, designs for reinstatement had to accommodate large flows and included underground bywash culverts, capable of carrying

5300-516: The canal. It is spanned by the New Mill at Bliss Mill, built by William Dangerfield in 1870, and consisting of three storeys with 18 bays. A small bridge with a single arch carries the Bisley to Minchinhampton road over the river. It was built around 1800 when the road was diverted. Below the bridge is the mill pond for Belvedere Mill, an early 19th century cloth mill now reused as offices. Brookside

5400-530: The civil parish but a separate ecclesiastical parish has a splendid listed church, St John the Baptist, built by George Frederick Bodley who went on to build Washington National Cathedral in Washington DC. One of the most distinctive, and most photographed, features of the village is the Round House. It was built by the Thames and Severn Canal Company as a lengthman 's cottage and is one of five along

5500-526: The contours of a hill. Chalford Lynch and its extension France Lynch originated in the late 16th century as collections of stone cottages many built illegally on the peripheries of Bisley common as the mill expansion in the valley outstripped accommodation space in the valley. Many dwellings in France Lynch and Chalford Hill only became legitimate at the time of the parliamentary enclosures in 1869. The settling of displaced Flemish Huguenot weavers in

5600-482: The district. More than 20 mill sites were involved in the industry between 1840 and its demise. With water power not always sufficient, there was a gradual transition towards steam power. The first mill to acquire a Boulton and Watt steam engine on the Frome system was Longfords Mill, Avening, on the Nailsworth Brook. They bought a 14 hp (10 kW) beam engine in 1814, and Bond's Mill at Eastington on

5700-450: The early 19th century, which was probably once a gig mill, while to the south of the railway viaduct is a former wool stove, where scoured and dyed wool was heated to dry it out. Prior to cloth manufacture, there were two fulling mills there in 1690, and part of the site was used as a corn mill in 1820. By 1860, it was making mattress-wool, mill-puff and shoddy, which had been superseded by cabinet making by 1901. After making walking sticks in

5800-463: The final section, it occupies the course of the Stroudwater Navigation for a short distance, passes under the Gloucester and Sharpness Canal as two separate channels at Saul Junction and enters the River Severn at a sluice at Upper Framilode . At Caudle Green the eastern side of the valley rises to the North Sea / Atlantic watershed , approximately one mile to the east. The Frome basin shares

5900-511: The full flood flow of all three streams. A new weir which carries a towpath bridge was constructed where the water leaves the canal to enter the River Frome, and a set of floodgates was constructed beyond the weir, to protect the canal from high water levels. After the closure of the canal in 1954, land drainage work resulted in the Lockham syphon being removed. To the west of the syphon, the canal and river ran parallel to one another, with

6000-522: The help of Alfred James, at the foot of Cowcombe Hill in the nearby village of Chalford , employing many of Gimson's skilled craftsmen including designer Norman Jewson . Chalford was a more practical location for a workshop than Sapperton, since it was close to a railway station and had more accessible roads. Many examples of his own work, and that produced by other craftsmen in his workshop, can be found in Christ Church there. They include

6100-409: The industry was William Dangerfield, who started making walking sticks in 1845 at Gussage Mill, on the Toadsmoor Brook. The business prospered, and soon outgrew the premises. A new site was found at Bliss Mill, and the machinery was relocated to that site, although wooden components continued to be made at Gussage Mill. The workforce marched ceremoniously to the new site, accompanied by flags, banners and

SECTION 60

#1732783812640

6200-466: The junction, Nailsworth Stream fed Dudbrige Flour Mill, a five-storey building dating from 1849 which is now hemmed in by the car park of a Sainsbury's supermarket. A little further to the west is Ebley Mill, a woollen mill that was built for Stanley and Stephen Clissold in 1818. A clock tower and extension were added in 1862, and the building was extensively refurbished in 1987-90 to become the offices for Stroud District Council . The next extant mill site

6300-415: The late 16th century and some from the late 17th century. A second mill building lies just to the north of St Mary's Mill. It dates from the early 18th century, and has a mid 19th century chimney. After passing Wimberley Mills, a railway viaduct carries the railway back to the south side of the valley, passing between the buildings of Bourne Mills, on the southern edge of Brimscombe . The main mill building

6400-400: The later 12th century, was the crossing-point of a track up Cowcombe hill on the line of the later Cirencester turnpike and by 1413 another track crossed into Minchinhampton by Stephen's bridge at Valley Corner. Chalford Hill is a recent title for the western end of the hill: Its original name was Chalford Lynch. "Lynch" ( lynchet in modern English) means a cultivated terrace following

6500-620: The manor of Minchinhampton, with more further down river in Stroud. Some had become fulling mills by 1360, and although there were several small mills that were only ever used for corn milling, there were 24 sites where cloth production is known to have occurred within the manor. By 1831, the movement from agriculture to cloth production in Bisley was considerable, with 277 families obtaining their income from agriculture, and 677 from trade. Between 1750 and 1820, there were 39 cloth mills at Stroud and above, with another 16 downstream of Stroud. Several of

6600-471: The manufacture of cloth in 1985. The site also retains some storage buildings dating from 1815, and the power loom shed, built in 1854 to house the first power looms used at the mill. The southern channel continues through the hamlet of Stanley Downton and under a viaduct on the Bristol to Exeter Railway to reach Beard's Mill. The workshops, dating from the late 18th century are listed buildings, and form

6700-399: The manufacture of silk and walking sticks instead. From the early 1840s, the manufacture of walking sticks and umbrella sticks, with their handles and fittings, provided prosperity to many along the river. A significant proportion of the sticks were exported to the colonies and to India, until the gradual demise of the fashion for walking sticks in the 1930s and 1940s. A significant player in

6800-553: The mid-1930s, Henry S Hack who manufactured umbrella sticks at Bourne Mill until the 1960s, and the Chalford Stick Company, which occupied St Mary's Mill at Chalford in 1903, and continued to make walking sticks there until 1981. They then moved to Churches Mill at Woodchester , where they made walking sticks for the National Health Service until 1990, becoming the last survivor of the industry in

6900-469: The mid-20th century, the site is now used for light industry, and the wool stove is used as a store. To the western end of Brimscombe Port, where goods were transferred between trows from the River Severn and Thames barges from the Thames, was Port Mill. This was probably the site of Field's Mill, which was operational in the 17th century, but had been rebuilt as Port Mill by 1744. Brimscombe Port

7000-535: The mill machinery. It was labelled as a corn mill in 1885. Henwood Mill was built before 1707, for in that year it was part of the Daneway Estate in the parish of Bisley. It was constructed of stone, and was sold to Earl Bathhurst, who continued to operate it as a corn mill until the early 20th century. Soon after purchase, Earl Bathurst replaced the breastshot water wheel with a water turbine manufactured by Gilbert Gilkes of Kendal . Since operation ceased,

7100-482: The mill weirs, some 12 feet (3.7 m) thick, on which cranes would be mounted. Cargo would be carried in boxes, which would be moved from a boat at one level to one at the other level by the cranes. An Act of Parliament was obtained in 1759, which specified 29 September 1761 as the date by which the work had to be completed. Some progress was made, but a six-year extension to the time limit was granted in 1761. Nearly 5 miles (8 km) of river were altered, probably from

7200-410: The mills of Chalford supplied much of its cloth. It remained an inn until the 1960s when it reverted to its former name of Chalford Place. The house lay derelict for many years until it was recently purchased and is now being restored by the artist Damien Hirst . The mill race of Ashmeads Mill remains; the mill itself was demolished in the early 1900s. In February 2008, Chalford hit the headlines when

7300-476: The organ gallery, the chancel screen and the lectern, all of which were designed by Jewson. The cover of the font , which lifts and descends by means of a counterbalance in the roof space, was carved by one of Waals' craftsmen, Owen Scrubey. From 1920 to 1937 the workshop produced high quality furniture to Waals' and Jewson's designs and also trained apprentices in the Arts and Crafts tradition. An apprenticeship at

7400-414: The plan faced concerted opposition from the large number of mill owners, who depended on the river for their water power. In 1728, a new scheme was proposed, for a navigable canal of 8.25 miles (13.3 km) with 12 locks. An Act of Parliament was obtained in 1730, with support from all of the mill owners above Stroud, but opposition from some below the town. Despite the mention of a canal, it was essentially

7500-485: The production of walking sticks and umbrella sticks, an industry that lasted into the mid-20th century. Steam engines were installed from the 1810s onwards, but were often used to assist when water power was insufficient, rather than to replace water power. Despite the demise of milling, many mill buildings survive along the course of the river, a significant number of which are listed buildings , in recognition of their architecture. The river has undergone modification over

7600-558: The quantity and varieties of invertebrates , angiosperms and fish. Chemical status compares the concentrations of various chemicals against known safe concentrations and is rated good or fail. The water quality of the Frome was as follows in 2019. The river has not been classed as good quality because of physical modification of the channel, which particularly affects fish populations. Historical weirs and modern flood protection structures prevent fish from moving freely along its course, and surface water abstraction, both for navigation on

7700-471: The river at Brimscombe Port is set to be changed as part of the redevelopment of the port for the reinstatement of the Thames and Severn Canal . Planning permission was obtained in March 2021 for infrastructure improvements, which include the demolition of modern additions to Port Mill. A new channel for the canal and a new bed for the river will be constructed further to the south, and the old river bed, which

7800-510: The river, and to the south of Stonehouse the river passes through the railway embankment on the Bristol to Exeter Railway to reach Bond's Mill. The complex of channels further downstream were once part of Churchend Woollen Mills, and then the two channels reunite. An underpass was constructed when the M5 motorway was built, and this will probably be shared with the Stroudwater Navigation when that

7900-462: The river. As it enters Golden Valley to the north of Frampton Mansell , it is joined by the Golden Valley line , a railway which runs from Swindon to Gloucester and emerges from the Sapperton railway tunnel nearby. Near Puck Mill Upper Lock, the canal crosses to the south side of the river, and there is a large reservoir, built to supply water to the Thames and Severn Canal. The reservoir

8000-417: The sides of the hills, giving the village an Alpine air. It is sometimes still referred to as the 'Alpine village'. As the paths on the hillsides were too narrow for more conventional forms of transport donkeys were used to carry groceries and other goods to houses, this tradition continuing until as recently as the 1950s. Chalford expanded rapidly with the opening of the Thames and Severn Canal in 1789 and

8100-530: The steam power was actually used. St Mary's Mill claimed that their engine had been made by Boulton and Watt, but Boulton and Watt's records do not show that they supplied the engine. By 1850, there were steam engines totalling 806 hp (601 kW) powering the Gloucestershire woollen industry, which included mills on the River Cam and Little Avon River as well as the Frome system, while water power contributed 1,495 hp (1,115 kW), or 65 per cent of

8200-508: The store and the donkey were featured in an episode of Countryfile . The store prospered within the local church hall but returned to the High Street in May 2014 and now thrives in the former Seventh Day Adventist Hall. This was made possible by a second community share issue which raised in excess of £50,000 alongside a bank loan and various grants. Notable residents include James Bradley ,

8300-614: The third Astronomer Royal , who died in Chalford in 1762, and the 19th-century sculptor John Thomas . Henry Cooper lived in the village as a child, after being evacuated to Chalford during the Second World War. The artist Damien Hirst has a studio in the village. Lord Janvrin , former Private Secretary to Elizabeth II , maintains a house in the village and on his retirement was gazetted as Baron Janvrin of Chalford Hill, on 10 October 2007. The Public Relations guru Mark Borkowski lives at Oakridge. The sub-village of Brownshill

8400-432: The total. The number of steam engines increased as the woollen industry gave way to other manufacturing processes, and these were in turn replaced by oil or gas engines, and finally by electric power. Below Sapperton the Frome runs adjacent to the Thames and Severn Canal , parts of which have been restored, although much remains disused. The canal joins the Stroudwater Navigation at Wallbridge. The Stroudwater Navigation

8500-597: The valley is "doubtless so called from the wealth that came from its industries". The name of the valley is occasionally falsely attributed to Queen Victoria , by whose time the name 'Golden Valley' had already entered common use. The Environment Agency measure the water quality of the river systems in England. Each is given an overall ecological status, which may be one of five levels: high, good, moderate, poor and bad. There are several components that are used to determine this, including biological status, which looks at

8600-555: The valley is also called the Golden Valley . An electoral ward in the same name exists. This ward covers a similar area to the parish but extends to the Brimscombe and Thrupp ward. The total population of the ward taken at the 2011 census was 6,509. The remains, and known sites of many barrows indicate that the plateau area of Chalford Hill, France Lynch and Bussage has been an area of continuous settlement for probably at least 4,000 years. Stone Age flints have been found in

8700-417: The valley opens out, with the channel splitting into two before reuniting into a single channel. The river, as well as its tributaries, has been used for milling since the time of the Domesday Book . Some early mills were used for milling corn but subsequently the river was important for the woollen industry, until that experienced a series of depressions in the early 19th century. The area then became known for

8800-434: The village became one of the centres for the manufacture of broadcloth and badger pelt farms. Its wealthy clothiers lived close to their mills and built many fine houses which survive to this day. In common with other towns and villages in the area, buildings are generally constructed of Cotswold stone , with local fields enclosed by dry stone walling . The area is designated as an Area of Outstanding Natural Beauty and

8900-527: The village itself is a designated conservation area . Chalford is noted for two fine Arts and Crafts movement churches. Christ Church ( Church of England ) contains work by Norman Jewson , William Simmonds, Peter Waals , Edward Barnsley , Norman Bucknell, amongst other distinguished artists and craftsmen working in the Cotswold tradition. The Church of Our Lady of the Angels ( Roman Catholic ), Brownshill, by W. D. Caroe (1930), contains outstanding stained glass by Douglas Strachan . France Lynch, part of

9000-411: The years, not least to power the mills. There was an early attempt to make it navigable as far as Stroud, using cranes to move containers from boats at one level to those at another level, at places where a mill dam prevented through navigation. The scheme was abandoned before it was completed, due to the cost of construction and the time taken to tranship the containers. Communication was later provided by

9100-427: Was acquired by the Thames and Severn Canal Company, and Richard William Walter Hancox was the last recorded miller. It probably ceased to operate in the late 1890s, but certainly by 1901, and had gradually fallen down. Most of the stone and ironwork have been robbed, and what remains lies beneath thick undergrowth. Daneway Mill was a steam-powered saw mill, which relied on the Thames and Severn Canal to supply coal, and

9200-408: Was an important and essential part of Stroud's growth as a town. The canal was a thriving thoroughfare for trade, putting Stroud on the map during the industrial revolution . The valley from Chalford to Stroud, known as the Golden Valley, is one of Stroud's Five Valleys ; it carries the Stroud-Swindon railway (known informally as the Golden Valley line) and the Thames and Severn Canal towards

9300-473: Was constructed around 1785, and had to take account of the mill, with the canal crossing the river to the west of the mill. The mill consists of a central water tower with three ranges attached to it, and was used for cloth production until the early 20th century. In 1948 it became Benson's Tool Works, and has since been converted into offices. After Brimscombe Port, the river turns northwest towards Stroud . The large mill pond that formerly powered Brimscombe Mill

9400-458: Was culverted to allow Port Mill to be extended, will be filled in. The river has been used to provide power to mills along much of its length. The furthest upstream was Edgeworth Mill, where there was a mill and house for the miller dating from the 18th century. It was refurbished and extended in the mid-19th century, and later became a farm house. The building has not been changed much since its construction, although there are no obvious remains of

9500-510: Was offered the position of foreman/manager and chief cabinet maker and accepted, spending the rest of his life in the Cotswolds . The furniture and craft work produced by the workshop under the day-to-day supervision of Waals is regarded as a supreme achievement of the Arts and Crafts movement of its period and is well represented in the principal collections of the decorative arts in Britain and

9600-406: Was operational by 1849. A portable steam engine drove several circular saws, the largest of which was 6 feet (1.8 m) in diameter. Most of the timber was sourced from the local woodland. As well as providing raw timber for use by local industries, at times it produced finished items, including barrel staves which were shipped to Birmingham, wooden block planes and wooden broom heads. Ernest Gimson,

9700-462: Was originally a five-storey L-shaped building, one of the early attempts to build a fireproof building, using a cast iron frame with brick cross vaulting and flagstone floors. Benjamin Gibbons manufactured the iron work, which is of exceptional quality, and the mill survived a major fire in 1884. Because of the quality of the brickwork and ironwork, the building is grade I listed . It was still used in

9800-492: Was out of use by 1968. Shortly afterwards, the river rejoins the northern channel. From its beginning, this runs close to the Stroudwater Navigation and under the buildings which were formerly Ryeford Saw Mill. It then passes under the A419 Ebley Bypass, to reach Upper Mills, built in 1875 for the cloth manufacturer R S Davies. Beyond it, a late 18th century bridge with two segmental arches carries Downton Road over

9900-545: Was the main centre for the training of handicraft teachers in England. There, Waals instructed students in the approach and high standards of craftsmanship required in the making of furniture that had been established by Ernest Gimson and the Barnsley brothers in Sapperton. He also designed all the furniture for Hazlerigg Hall as well as other fittings throughout the college, and these were built by his students. The college

10000-656: Was the nephew of the Nobel Prize -winning physicist Johannes Diderik van der Waals . Trained as a cabinet maker in his native Netherlands , Waals spent three years working in Brussels , Berlin and Vienna before moving to London where he was introduced to Ernest Gimson in 1901. Gimson had set up a small workshop in Cirencester , Gloucestershire , and then at Daneway House at Sapperton , making furniture, turned chairs, and metalwork to his own designs. Waals

#639360