Misplaced Pages

#959040

63-672: Based on the OPR-1000 design, KEPCO has developed a Generation III reactor uprated plant, the APR-1400 . The reference plants used to develop the OPR-1000 design using technology transfer are Yeonggwang (now Hanbit ) Unit-3 and Unit-4, which came on-line in 1995 and 1996, respectively. The first plants designated as OPR-1000 plants are Ulchin (now Hanul ) Unit-3 and Unit-4, which came on-line in 1998 and 1999, respectively. Korea Hydro & Nuclear Power (KHNP) states an improved OPR-1000 design has been implemented at eight units: Including

126-769: A fast neutron reactor . The leaders in national experience with PWRs, offering reactors for export, are the United States (which offers the passively safe AP1000 , a Westinghouse design, as well as several smaller, modular, passively safe PWRs, such as the Babcock & Wilcox MPower , and the NuScale MASLWR), the Russian Federation (offering both the VVER-1000 and the VVER-1200 for export),

189-435: A heavy water reactor , which uses heavy water as a neutron moderator. While ordinary water has some heavy water molecules in it, it is not enough to be important in most applications. In pressurized water reactors the coolant water is used as a moderator by letting the neutrons undergo multiple collisions with light hydrogen atoms in the water, losing speed in the process. This moderating of neutrons will happen more often when

252-408: A nuclear renaissance suggesting that Gen III+ designs should solve three key problems: safety, cost and buildability. Construction costs of US$ 1,000/kW were forecast, a level that would make nuclear competitive with gas, and construction times of four years or less were expected. However, these estimates proved over-optimistic. A notable improvement of Gen III+ systems over second-generation designs

315-580: A 200-tonne core catcher in the VVER reactor as the first large piece of equipment in the reactor building of Rooppur 1 , describing it as "a unique protection system". In 2017, Rosatom has started commercial operations of the NVNPP-2 Unit 1 VVER-1200 reactor in central Russia, marking the world's first full start-up of a generation III+ reactor. The first Generation III reactors were built in Japan, in

378-438: A commercial pressurized water reactor assembly — and inserted into guide tubes within a fuel element. A control rod is removed from or inserted into the central core of a nuclear reactor in order to control the number of neutrons which will split further uranium atoms. This in turn affects the thermal power of the reactor, the amount of steam generated, and hence the electricity produced. The control rods are partially removed from

441-490: A compromise of the reactor core's integrity, the resulting release of the light-water moderator will act to stop the nuclear reaction and shut the reactor down. This capability is known as a negative void coefficient of reactivity . Data from the International Atomic Energy Agency in 2009: The light-water reactor produces heat by controlled nuclear fission . The nuclear reactor core is

504-524: A grinding process to achieve a uniform pellet size. The uranium oxide is dried before inserting into the tubes to try to eliminate moisture in the ceramic fuel that can lead to corrosion and hydrogen embrittlement. The pellets are stacked, according to each nuclear core's design specifications, into tubes of corrosion-resistant metal alloy. The tubes are sealed to contain the fuel pellets: these tubes are called fuel rods. The finished fuel rods are grouped in special fuel assemblies that are then used to build up

567-632: A material full of atoms with light nuclei which do not easily absorb neutrons. The neutrons strike the nuclei and bounce off. After sufficient impacts, the velocity of the neutron will be comparable to the thermal velocities of the nuclei; this neutron is then called a thermal neutron. The light-water reactor uses ordinary water , also called light water, as its neutron moderator. The light water absorbs too many neutrons to be used with unenriched natural uranium, and therefore uranium enrichment or nuclear reprocessing becomes necessary to operate such reactors, increasing overall costs. This differentiates it from

630-468: A moderator and coolant, and clad solid uranium as fuel. The results showed that, with a lightly enriched uranium, criticality could be reached. This experiment was the first practical step toward the light-water reactor. After World War II and with the availability of enriched uranium, new reactor concepts became feasible. In 1946, Eugene Wigner and Alvin Weinberg proposed and developed the concept of

693-432: A reactor moderator and coolant, but the vast majority of Russian nuclear-powered boats and ships use light-water reactors exclusively. The reason for near exclusive LWR use aboard nuclear naval vessels is the level of inherent safety built into these types of reactors. Since light water is used as both a coolant and a neutron moderator in these reactors, if one of these reactors suffers damage due to military action, leading to

SECTION 10

#1732787524960

756-530: A reactor using enriched uranium as a fuel, and light water as a moderator and coolant. This concept was proposed for a reactor whose purpose was to test the behavior of materials under neutron flux . This reactor, the Material Testing Reactor (MTR) , was built in Idaho at INL and reached criticality on March 31, 1952. For the design of this reactor, experiments were necessary, so a mock-up of

819-500: A sustained chain reaction using graphite or heavy water as a moderator. While the world's first reactors ( CP-1 , X10 etc.) were successfully reaching criticality , uranium enrichment began to develop from theoretical concept to practical applications in order to meet the goal of the Manhattan Project , to build a nuclear explosive . In May 1944, the first grams of enriched uranium ever produced reached criticality in

882-737: A tip, four additional units were shut down and not allowed to restart until fraudulently-certified safety-related control cabling was replaced: Shin Kori-1 and -2 and Shin Wolsong-1 and -2; although construction on Shin Wolsong-2 was complete, it had not yet achieved operational status, and it was not allowed to start up until cabling was replaced. The same cabling was used at the APR-1400 units then under construction at Shin Kori (Units 3 & 4), forcing

945-613: A whole are safer than older reactors. Edwin Lyman , a senior staff scientist at the Union of Concerned Scientists , has challenged specific cost-saving design choices made for two Generation III reactors, both the AP1000 and ESBWR . Lyman, John Ma (a senior structural engineer at the NRC), and Arnold Gundersen (an anti-nuclear consultant) are concerned about what they perceive as weaknesses in

1008-620: A year-long delay in their startup. After cabling was replaced, Shin Kori-1 and -2 and Shin Wolsong-1 were approved for restart in January 2014. Shin Wolsong-2 was connected to the grid in February 2015, with commercial operation commencing in July 2015. A variant incorporating a number of advanced features from the larger APR-1400 design, named the APR1000, has been designed for European use. It

1071-848: Is arbitrary, few Gen III reactors have reached the commercial stage as of 2022. The Generation IV International Forum calls Gen IV reactors "revolutionary designs". These are concepts for which no concrete prognoses for realization existed at the time. The improvements in reactor technology in third generation reactors are intended to result in a longer operational life (designed for 60 years of operation, extendable to 100+ years of operation prior to complete overhaul and reactor pressure vessel replacement) compared with currently used Generation II reactors (designed for 40 years of operation, extendable to 60+ years of operation prior to complete overhaul and pressure vessel replacement). The core damage frequencies for these reactors are designed to be lower than for Generation II reactors – 60 core damage events for

1134-450: Is boiled directly by the reactor core, for example the boiling-water reactor. Many other reactors are also light-water cooled, notably the RBMK and some military plutonium -production reactors. These are not regarded as LWRs, as they are moderated by graphite , and as a result their nuclear characteristics are very different. Although the coolant flow rate in commercial PWRs is constant, it

1197-400: Is circulated past the reactor core to absorb the heat that it generates. The heat is carried away from the reactor and is then used to generate steam. Most reactor systems employ a cooling system that is physically separate from the water that will be boiled to produce pressurized steam for the turbines , like the pressurized-water reactor. But in some reactors the water for the steam turbines

1260-418: Is consumed in the reactor. Light-water reactors are generally refueled every 12 to 18 months, at which time, about 25 percent of the fuel is replaced. The enriched UF 6 is converted into uranium dioxide powder that is then processed into pellet form. The pellets are then fired in a high-temperature, sintering furnace to create hard, ceramic pellets of enriched uranium . The cylindrical pellets then undergo

1323-691: Is formed into pellets and inserted into zirconium alloy tubes that are bundled together. The zirconium alloy tubes are about 1 cm in diameter, and the fuel cladding gap is filled with helium gas to improve the conduction of heat from the fuel to the cladding. There are about 179-264 fuel rods per fuel bundle and about 121 to 193 fuel bundles are loaded into a reactor core . Generally, the fuel bundles consist of fuel rods bundled 14x14 to 17x17. PWR fuel bundles are about 4 meters in length. The zirconium alloy tubes are pressurized with helium to try to minimize pellet cladding interaction which can lead to fuel rod failure over long periods. In boiling water reactors,

SECTION 20

#1732787524960

1386-469: Is not in nuclear reactors used on U.S. Navy ships. The use of ordinary water makes it necessary to do a certain amount of enrichment of the uranium fuel before the necessary criticality of the reactor can be maintained. The light-water reactor uses uranium 235 as a fuel, enriched to approximately 3 percent. Although this is its major fuel, the uranium 238 atoms also contribute to the fission process by converting to plutonium 239 ; about one-half of which

1449-488: Is the incorporation in some designs of passive safety features that do not require active controls or operator intervention but instead rely on gravity or natural convection to mitigate the impact of abnormal events. Generation III+ reactors incorporate extra safety features to avoid the kind of disaster suffered at Fukushima in 2011. Generation III+ designs, passive safety, also known as passive cooling, requires no sustained operator action or electronic feedback to shut down

1512-561: The EPR as the only new reactor design under consideration in the United States that "...appears to have the potential to be significantly safer and more secure against attack than today's reactors." There have also been issues in fabricating the precision parts necessary to maintain safe operation of these reactors, with cost overruns, broken parts, and extremely fine steel tolerances causing issues with new reactors under construction in France at

1575-482: The Energy Impact Center announced publication of an open-sourced engineering design of a pressurized water reactor capable of producing 300 MWth/100 MWe of energy called OPEN100 . The family of nuclear reactors known as light-water reactors (LWR), cooled and moderated using ordinary water, tend to be simpler and cheaper to build than other types of nuclear reactors ; due to these factors, they make up

1638-763: The European Pressurized Reactor (EPR) and 3 core damage events for the Economic Simplified Boiling Water Reactor (ESBWR) per 100 million reactor-years are significantly lower than the 1,000 core damage events per 100 million reactor-years for BWR/4 Generation II reactors. The third generation EPR reactor was also designed to use uranium more efficiently than older Generation II reactors, using approximately 17% less per unit of electricity generated than these older reactor technologies. An independent analysis conducted by environmental scientist Barry Brook on

1701-490: The Flamanville Nuclear Power Plant . Light-water reactor The light-water reactor ( LWR ) is a type of thermal-neutron reactor that uses normal water, as opposed to heavy water , as both its coolant and neutron moderator ; furthermore a solid form of fissile elements is used as fuel. Thermal-neutron reactors are the most common type of nuclear reactor , and light-water reactors are

1764-546: The Generation IV International Forum (GIF). The first Generation III reactors to begin operation were Kashiwazaki 6 and 7 advanced boiling water reactors (ABWRs) in 1996 and 1997. From 2012, both have been shut down due to a less permissive political environment in the wake of the Fukushima nuclear accident . Due to the prolonged period of stagnation in the construction of new reactors and

1827-879: The Taishan Nuclear Power Station (first grid connection on 2018-06-29) and a Westinghouse AP1000 reactor at the Sanmen Nuclear Power Station (first grid connection on 2018-06-30) in China. In the United States, reactor designs are certified by the Nuclear Regulatory Commission (NRC). As of August 2020 , the commission has approved seven new designs, and is considering one more design as well as renewal of an expired certification. Proponents of nuclear power and some who have historically been critical have acknowledged that third generation reactors as

1890-406: The boiling water reactor , the heat generated by fission turns the water into steam, which directly drives the power-generating turbines. But in the pressurized water reactor , the heat generated by fission is transferred to a secondary loop via a heat exchanger. Steam is produced in the secondary loop, and the secondary loop drives the power-generating turbines. In either case, after flowing through

1953-404: The low power (LOPO) reactor at Los Alamos , which was used to estimate the critical mass of U235 to produce the atomic bomb. LOPO cannot be considered as the first light-water reactor because its fuel was not a solid uranium compound cladded with corrosion-resistant material, but was composed of uranyl sulfate salt dissolved in water. It is however the first aqueous homogeneous reactor and

OPR-1000 - Misplaced Pages Continue

2016-511: The APR1000 is an independently developed design. Generation III reactor Generation III reactors , or Gen III reactors , are a class of nuclear reactors designed to succeed Generation II reactors, incorporating evolutionary improvements in design. These include improved fuel technology , higher thermal efficiency , significantly enhanced safety systems (including passive nuclear safety ), and standardized designs intended to reduce maintenance and capital costs. They are promoted by

2079-714: The Koreans currently designing and constructing their second generation of indigenous designs. The leaders in national experience with BWRs, offering reactors for export, are the United States and Japan, with the alliance of General Electric (of the US) and Hitachi (of Japan), offering both the Advanced Boiling Water Reactor (ABWR) and the Economic Simplified Boiling Water Reactor (ESBWR) for construction and export; in addition, Toshiba offers an ABWR variant for construction in Japan, as well. West Germany

2142-651: The MTR was built at ORNL , to assess the hydraulic performances of the primary circuit and then to test its neutronic characteristics. This MTR mock-up, later called the Low Intensity Test Reactor (LITR), reached criticality on February 4, 1950 and was the world's first light-water reactor. Immediately after the end of World War II the United States Navy started a program under the direction of Captain (later Admiral) Hyman Rickover , with

2205-786: The Republic of France (offering the AREVA EPR for export), and Japan (offering the Mitsubishi Advanced Pressurized Water Reactor for export); in addition, both the People's Republic of China and the Republic of Korea are both noted to be rapidly ascending into the front rank of PWR-constructing nations as well, with the Chinese being engaged in a massive program of nuclear power expansion, and

2268-480: The Russian Federation and former Soviet states. Though electricity generation capabilities are comparable between all these types of reactor, due to the aforementioned features, and the extensive experience with operations of the LWR, it is favored in the vast majority of new nuclear power plants. In addition, light-water reactors make up the vast majority of reactors that power naval nuclear-powered vessels . Four out of

2331-469: The chain reaction to slow down, producing less heat. This property, known as the negative temperature coefficient of reactivity, makes PWRs very stable. In event of a loss-of-coolant accident , the moderator is also lost and the active fission reaction will stop. Heat is still produced after the chain reaction stops from the radioactive byproducts of fission, at about 5% of rated power. This "decay heat" will continue for 1 to 3 years after shut down, whereupon

2394-418: The continued (albeit declining) popularity of Generation II/II+ designs in new construction, relatively few third generation reactors have been built. The older Gen II reactors comprise the vast majority of current nuclear reactors. Gen III reactors are so-called advanced light-water reactors (LWRs). Gen III+ reactors are labeled as "evolutionary designs". Though the distinction between Gen II and III reactors

2457-415: The control rods are lowered into the core, they absorb neutrons, which thus cannot take part in the chain reaction . On the converse, when the control rods are lifted out of the way, more neutrons strike the fissile uranium-235 or plutonium-239 nuclei in nearby fuel rods, and the chain reaction intensifies. All of this is enclosed in a water-filled steel pressure vessel , called the reactor vessel . In

2520-532: The core to allow a chain reaction to occur. The number of control rods inserted and the distance by which they are inserted can be varied to control the reactivity of the reactor. Usually there are also other means of controlling reactivity. In the PWR design a soluble neutron absorber, usually boric acid , is added to the reactor coolant allowing the complete extraction of the control rods during stationary power operation ensuring an even power and flux distribution over

2583-828: The effort to develop the BWR at the US National Reactor Testing Station (now the Idaho National Laboratory ) in a series of tests called the BORAX experiments . PIUS, standing for Process Inherent Ultimate Safety , was a Swedish design designed by ASEA-ATOM. It is a concept for a light-water reactor system. Along with the SECURE reactor, it relied on passive measures, not requiring operator actions or external energy supplies, to provide safe operation. No units were ever built. In 2020,

OPR-1000 - Misplaced Pages Continue

2646-451: The entire core. Operators of the BWR design use the coolant flow through the core to control reactivity by varying the speed of the reactor recirculation pumps. An increase in the coolant flow through the core improves the removal of steam bubbles, thus increasing the density of the coolant/moderator with the result of decreasing power. The light-water reactor also uses ordinary water to keep the reactor cooled. The cooling source, light water,

2709-505: The exact cause of the problem. In 2012, a probe was opened regarding some fraudulently-certified parts installed in five OPR-1000 reactors over a ten-year period. Hanbit-5 and -6, which had a greater number of fraudulent parts, were shut down until the parts could be replaced, and Hanbit-3 and -4 and Hanul-3 were allowed remain on-line pending parts replacement. Hanbit-5 and -6 were cleared for restart in early 2013, but in April 2013, following

2772-459: The first reactor using enriched uranium as fuel and ordinary water as a moderator. By the end of the war , following an idea of Alvin Weinberg , natural uranium fuel elements were arranged in a lattice in ordinary water at the top of the X10 reactor to evaluate the neutron multiplication factor. The purpose of this experiment was to determine the feasibility of a nuclear reactor using light water as

2835-748: The five great powers with nuclear naval propulsion capacity use light-water reactors exclusively: the British Royal Navy , the Chinese People's Liberation Army Navy , the French Marine nationale , and the United States Navy . Only the Russian Federation's Navy has used a relative handful of liquid-metal cooled reactors in production vessels, specifically the Alfa class submarine , which used lead-bismuth eutectic as

2898-573: The form of advanced boiling water reactors . On 5 August 2016, a Generation III+ VVER-1200 /392M reactor became operational (first grid connection) at Novovoronezh Nuclear Power Plant II in Russia, which was the first operational Generation III+ reactor. Several other Generation III+ reactors are under late-stage construction in Europe, China, India, and the United States. The next Generation III+ reactors to come online were an AREVA EPR reactor at

2961-423: The fuel is similar to PWR fuel except that the bundles are "canned"; that is, there is a thin tube surrounding each bundle. This is primarily done to prevent local density variations from affecting neutronics and thermal hydraulics of the nuclear core on a global scale. In modern BWR fuel bundles, there are either 91, 92, or 96 fuel rods per assembly depending on the manufacturer. A range between 368 assemblies for

3024-600: The goal of nuclear propulsion for ships. It developed the first pressurized water reactors in the early 1950s, and led to the successful deployment of the first nuclear submarine, the USS ; Nautilus  (SSN-571) . The Soviet Union independently developed a version of the PWR in the late 1950s, under the name of VVER . While functionally very similar to the American effort, it also has certain design distinctions from Western PWRs. Researcher Samuel Untermyer II led

3087-465: The greater efficiency and therefore lower material needs of Gen III reactors, corroborates this finding. Gen III+ reactor designs are an evolutionary development of Gen III reactors, offering improvements in safety over Gen III reactor designs. Manufacturers began development of Gen III+ systems in the 1990s by building on the operating experience of the American, Japanese, and Western European light-water reactor . The nuclear industry began to promote

3150-438: The most common type of thermal-neutron reactor. There are three varieties of light-water reactors: the pressurized water reactor (PWR), the boiling water reactor (BWR), and (most designs of) the supercritical water reactor (SCWR). After the discoveries of fission , moderation and of the theoretical possibility of a nuclear chain reaction , early experimental results rapidly showed that natural uranium could only undergo

3213-564: The nuclear fuel core of a power reactor. The metal used for the tubes depends on the design of the reactor – stainless steel was used in the past, but most reactors now use a zirconium alloy . For the most common types of reactors the tubes are assembled into bundles with the tubes spaced precise distances apart. These bundles are then given a unique identification number, which enables them to be tracked from manufacture through use and into disposal. Pressurized water reactor fuel consists of cylindrical rods put into bundles. A uranium oxide ceramic

SECTION 50

#1732787524960

3276-471: The plant safely in the event of an emergency. Many of the Generation III+ nuclear reactors have a core catcher . If the fuel cladding and reactor vessel systems and associated piping become molten, corium will fall into a core catcher which holds the molten material and has the ability to cool it. This, in turn protects the final barrier, the containment building . As an example, Rosatom installed

3339-513: The portion of a nuclear reactor where the nuclear reactions take place. It mainly consists of nuclear fuel and control elements . The pencil-thin nuclear fuel rods, each about 12 feet (3.7 m) long, are grouped by the hundreds in bundles called fuel assemblies. Inside each fuel rod, pellets of uranium , or more commonly uranium oxide , are stacked end to end. The control elements, called control rods, are filled with pellets of substances like hafnium or cadmium that readily capture neutrons. When

3402-434: The reactor finally reaches "full cold shutdown". Decay heat, while dangerous and strong enough to melt the core, is not nearly as intense as an active fission reaction. During the post shutdown period the reactor requires cooling water to be pumped or the reactor will overheat. If the temperature exceeds 2200 °C, cooling water will break down into hydrogen and oxygen, which can form a (chemically) explosive mixture. Decay heat

3465-522: The reference Unit-3 and Unit-4 at Hanbit (formerly Yeonggwang), there are a total of twelve OPR-1000 plants, all inside South Korea . The first plants incorporating the APR-1400 design are still under construction. Ten units are planned: The first start of the OPR-1000 at Shin Kori Nuclear Power Plant Unit-1 was 28 February 2011. This OPR-1000's first malfunction was noted on 2 October 2012 at 8:10 a.m. Shin Kori-1

3528-401: The smallest and 800 assemblies for the largest U.S. BWR forms the reactor core. Each BWR fuel rod is back filled with helium to a pressure of about three atmospheres (300 kPa). A neutron moderator is a medium which reduces the velocity of fast neutrons , thereby turning them into thermal neutrons capable of sustaining a nuclear chain reaction involving uranium-235. A good neutron moderator is

3591-459: The steel containment vessel and the concrete shield building around the AP1000 in that its containment vessel does not have sufficient safety margins in the event of a direct airplane strike. Other engineers do not agree with these concerns, and claim the containment building is more than sufficient in safety margins and factors of safety . The Union of Concerned Scientists in 2008 referred to

3654-557: The turbines, the steam turns back into water in the condenser. The water required to cool the condenser is taken from a nearby river or ocean. It is then pumped back into the river or ocean, in warmed condition. The heat can also be dissipated via a cooling tower into the atmosphere. The United States uses LWR reactors for electric power production, in comparison to the heavy water reactors used in Canada. Control rods are usually combined into control rod assemblies — typically 20 rods for

3717-477: The vast majority of civil nuclear reactors and naval propulsion reactors in service throughout the world as of 2009. LWRs can be subdivided into three categories – pressurized water reactors (PWRs), boiling water reactors (BWRs), and supercritical water reactors ( SCWRs ). The SCWR remains hypothetical as of 2009; it is a Generation IV design that is still a light-water reactor, but it is only partially moderated by light water and exhibits certain characteristics of

3780-419: The water is denser, because more collisions will occur. The use of water as a moderator is an important safety feature of PWRs, as any increase in temperature causes the water to expand and become less dense; thereby reducing the extent to which neutrons are slowed down and hence reducing the reactivity in the reactor. Therefore, if reactivity increases beyond normal, the reduced moderation of neutrons will cause

3843-541: Was also once a major player with BWRs. The other types of nuclear reactor in use for power generation are the heavy water moderated reactor , built by Canada ( CANDU ) and the Republic of India (AHWR), the advanced gas cooled reactor (AGCR), built by the United Kingdom, the liquid metal cooled reactor (LMFBR), built by the Russian Federation, the Republic of France, and Japan, and the graphite-moderated, water-cooled reactor (RBMK or LWGR), found exclusively within

SECTION 60

#1732787524960

3906-615: Was certified as compliant by the European Utility Requirements (EUR) organisation in March 2023. The assessment was requested in November 2019, and the assessment started in February 2021. It will still require design approval in each country it is used in. KHNP is in an intellectual property legal dispute with Westinghouse, which claims Westinghouse technology is incorporated in the APR1000 design, while KHNP claims

3969-473: Was shut down after a warning signal indicated a malfunction in the control rod, which is used to control the rate of fission of nuclear materials, according to the Korea Hydro & Nuclear Power Co. It is the first time that reactor, located 450 kilometers southeast of Seoul, has been shut down due to a malfunction since it began commercial operation on 28 Feb. 2011. An investigation was undertaken to verify

#959040