Misplaced Pages

#393606

82-525: Bersham Colliery was a large coal mine located near Rhostyllen in Wrexham , Wales . The mine accessed seams found in the Denbighshire Coalfield . The Wrexham area in the 19th Century was highly industrialised. At the peak there were 38 different collieries operating in the area, each producing coal totalling over 2.5 million tonnes annually to the numerous brickworks and steelworks in

164-705: A 70% increase over the 20 years since 1999. In 2018, the world production of brown coal (lignite) was 803.2 Mt, with Germany the world's largest producer at 166.3 Mt. China is most likely the second largest producer and consumer of lignite globally although specific lignite production data is not made available. Coal production has grown fastest in Asia, while Europe has declined. Since 2011, world coal production has been stable, with decreases in Europe and US offset by increases from China, Indonesia and Australia. The top coal mining nations are: Energy production from coal mining

246-467: A coal seam occurring near the top of a ridge or hill, the entire top is removed in a series of parallel cuts. Overburden is deposited in nearby valleys and hollows. This method usually leaves the ridge and hilltops as flattened plateaus. The process is highly controversial for the drastic changes in topography, the practice of creating head-of-hollow-fills , or filling in valleys with mining debris, and for covering streams and disrupting ecosystems. Spoil

328-405: A fourth of the world's energy. Coal extraction methods vary depending on whether the mine is an underground mine or a surface (also called an open cast) mine. Additionally, coal seam thickness and geology are factors in the selection of a mining method. The most economical method of coal extraction for surface mines is the electric shovel or drag line. The most economical form of underground mining

410-513: A geological faultline, the Wrexham-Staffordshire faultline, running nearby meant that seams abruptly stopped. In 1923, the mine employed 808 men, and this decreasing to 800 in 1945. Ownership during this time appeared to jump between Broughton & Plas Power Coal Co. Ltd and Bersham Colliery Company Ltd, with ownership changing between the two three times, with Broughton & Plas Power Coal Co. Ltd finally retaining ownership of

492-403: A greater proportion of the coal deposit than underground methods, as more of the coal seams in the strata may be exploited. This equipment can include the following: Draglines which operate by removing the overburden, power shovels, large trucks in which transport overburden and coal, bucket wheel excavators, and conveyors. In this mining method, explosives are first used in order to break through

574-425: A grid of piles is installed, and a reinforced concrete raft is then constructed over the complete floor level, picking up and fully supporting all external and internal walls. One of the uses of the soil improvement technique of pressure grouting is foundation underpinning especially during excavations like subway constructions. This technique has been used in municipal development projects of significant scope in

656-517: A high slenderness ratio, feature substantial steel reinforcing elements and can sustain axial loading in both senses. The working loads of mini-piles can sustain up to 1,000 kN (100 long tons-force; 110 short tons-force) loads. In comparison to Mass Concrete Underpinning, the engineering aspect of mini-piles is somewhat more involved, including rudimentary engineering mechanics such as statics and strength of materials. These mini-piles must be designed to work in tension and compression, depending on

738-440: A land use condition is not equal to the original use. Existing land uses (such as livestock grazing, crop and timber production) are temporarily eliminated in mining areas. High-value, intensive-land-use areas like urban and transportation systems are not usually affected by mining operations. If mineral values are sufficient, these improvements may be removed to an adjacent area. Strip mining eliminates existing vegetation, destroys

820-440: A large dining-room table, but with hydraulic jacks for legs. After the large pillars of coal have been mined away, the mobile roof support's legs shorten and it is withdrawn to a safe area. The mine roof typically collapses once the mobile roof supports leave an area. There are six principal methods of underground mining: Coal is mined commercially in over 50 countries. 7,921 million metric tons (Mt) of coal were produced in 2019,

902-447: A method that currently accounts for about 60 percent of world coal production. In deep mining, the room and pillar or bord and pillar method progresses along the seam, while pillars and timber are left standing to support the mine roof. Once room and pillar mines have been developed to a stopping point limited by geology, ventilation, or economics, a supplementary version of room and pillar mining, termed second mining or retreat mining ,

SECTION 10

#1732781043394

984-433: A new coal mine. Underpinning Underpinning may be accomplished by extending the foundation in depth or breadth so it either rests on a more supportive soil stratum or distributes its load across a greater area. Use of micropiles and jet grouting are common methods in underpinning. Underpinning may be necessary where P class (problem) soils in certain areas of the site are encountered. Through semantic change

1066-620: A regular domestic doorway. They are capable of constructing piles to depths of up to 15 m (49 ft). The technique of minipiling was first applied in Italy in 1952, and has gone through many different names, reflecting worldwide acceptance and expiration of the original patents. The relatively small diameter of mini-piles is distinctive of this type of underpinning and generally uses anchoring or tie backs into an existing structure or rock. Conventional drilling and grouting methods are used for this method of underpinning. These mini-piles have

1148-589: A result of occupational exposures is coined occupational hearing loss . To protect miners' hearing, the US Mine Safety and Health Administration 's (MSHA) guidelines for noise place a Permissible Exposure Limit (PEL) for noise at 90 dBA time-weighted over 8 hours. A lower cutoff, 85 dBA, is set for a worker to fall into the MSHA Action Level which dictates that workers be placed into hearing conservation programs. Noise exposures vary depending on

1230-575: Is accomplished by drilling holes into the overburden, filling the holes with explosives, and detonating the explosive. The overburden is then removed, using large earth-moving equipment, such as draglines , shovel and trucks, excavator and trucks, or bucket-wheels and conveyors. This overburden is put into the previously mined (and now empty) strip. When all the overburden is removed, the underlying coal seam will be exposed (a 'block' of coal). This block of coal may be drilled and blasted (if hard) or otherwise loaded onto trucks or conveyors for transport to

1312-427: Is commonly started. Miners remove the coal in the pillars, thereby recovering as much coal from the coal seam as possible. A work area involved in pillar extraction is called a pillar section. Modern pillar sections use remote-controlled equipment, including large hydraulic mobile roof-supports, which can prevent cave-ins until the miners and their equipment have left a work area. The mobile roof supports are similar to

1394-486: Is constructed below, above or in replacement of the existing footing. The beam then transfers the load of the building to mass concrete bases, which are constructed at designed strategic locations. Base sizes and depths are dependent upon the prevailing ground conditions. Beam design is dependent upon the configuration of the building and the applied loads. Anti-heave precautions are often incorporated in schemes where potential expansion of clay soils may occur. Mini-piles have

1476-418: Is dedicated to mining activities until it can be reshaped and reclaimed. If mining is allowed, resident human populations must be resettled off the mine site; economic activities, such as agriculture or hunting and gathering food and medicinal plants are interrupted. What becomes of the land surface after mining is determined by the manner in which the mining is conducted. Usually reclamation of disturbed lands to

1558-516: Is highly concentrated in certain jurisdictions, which also concentrates much of the social and economic impacts of the industry to these regions. The industry directly employs over seven million workers worldwide, which, in turn, creates millions of indirect jobs. In several parts of the world, producers have reached peak coal as some economies shift away from fossil fuels to address climate change. A 2020 study found that renewables jobs could feasibly be created in these geographies to replace many of

1640-484: Is mostly used to generate electricity, and 75% of annual coal production is exported, mostly to eastern Asia. In 2007, 428 million tonnes of coal was mined in Australia. In 2007, coal provided about 85% of Australia's electricity production. In the fiscal year 2008/09, 487 million tonnes of coal was mined, and 261 million tonnes was exported. In the fiscal year 2013/14, 430.9 million tonnes of coal

1722-417: Is partially economically recoverable. Coal refuse is distinct from the byproducts of burning coal, such as fly ash . Piles of coal refuse can have significant negative environmental consequences, including the leaching of iron, manganese, and aluminum residues into waterways and acid mine drainage . The runoff can create both surface and groundwater contamination. The piles also create a fire hazard, with

SECTION 20

#1732781043394

1804-532: Is performed in compliance with the Party Wall Act (in the UK) using plans that are designed with engineering calculations to plan a sequence of excavating bays along and underneath the existing foundation without damaging existing walls. In some cases walls have collapsed because lateral support was inadequate leading to disputes among contractors, subcontractors and architects about where the responsibility lay for

1886-593: Is placed at the head of a narrow, steep-sided valley or hollow. In preparation for filling this area, vegetation and soil are removed and a rock drain constructed down the middle of the area to be filled, where a natural drainage course previously existed. When the fill is completed, this underdrain will form a continuous water runoff system from the upper end of the valley to the lower end of the fill. Typical head-of-hollow fills are graded and terraced to create permanently stable slopes. Most coal seams are too deep underground for opencast mining and require underground mining,

1968-436: Is referred to as 'overburden' and is removed in long strips. The overburden from the first strip is deposited in an area outside the planned mining area and referred to as out-of-pit dumping. Overburden from subsequent strips is deposited in the void left from mining the coal and overburden from the previous strip. This is referred to as in-pit dumping. It is often necessary to fragment the overburden by use of explosives. This

2050-515: Is removed and overburden dumped to the side. Dust, vibration, and diesel exhaust odors are created (affecting sight, sound, and smell). Residents of local communities often find such impacts disturbing or unpleasant. In case of mountaintop removal , tops are removed from mountains or hills to expose thick coal seams underneath. The soil and rock removed is deposited in nearby valleys, hollows and depressions, resulting in blocked (and contaminated) waterways. Removal of soil and rock overburden covering

2132-712: Is still common, with 4,000 new cases of black lung every year in the US (4 percent of workers annually) and 10,000 new cases every year in China (0.2 percent of workers). The use of water sprays in mining equipment reduces the risk to miners' lungs. Build-ups of a hazardous gas are known as damps, possibly from the German word Dampf which means steam or vapor: Noise is also a contributing factor to potential adverse effects on coal miners' health. Exposure to excessive noise can lead to noise-induced hearing loss . Hearing loss developed as

2214-464: Is the long wall, which involves using two spinning drums with carbide bits that runs along sections of the coal seam. Many coals extracted from both surface and underground mines require washing in a coal preparation plant . Technical and economic feasibility are evaluated based on the following: regional geological conditions; overburden characteristics; coal seam continuity, thickness, structure, quality, and depth; strength of materials above and below

2296-435: Is used for both thermal and metallurgical coals . In New South Wales open casting for steam coal and anthracite is practiced. Surface mining accounts for around 80 percent of production in Australia, while in the US it is used for about 67 percent of production. Globally, about 40 percent of coal production involves surface mining. Strip mining exposes coal by removing earth above each coal seam. This earth to be removed

2378-582: The Building Research Establishment subsidence database, mass concrete underpinning was the most common underpinning and was often applied only to part of a building. If the soils have a low bearing capacity partial underpinning may increase the risk of differential settlement and localized settlement due to additional load on the soil. The beam and base method of underpinning is a more technically advanced adaptation of traditional mass concrete underpinning. A reinforced concrete beam

2460-491: The Industrial Revolution , and coal provided the main source of primary energy for industry and transportation in industrial areas from the 18th century to the 1950s. Coal remains an important energy source. Coal is also mined today on a large scale by open pit methods wherever the coal strata strike the surface or are relatively shallow. Britain developed the main techniques of underground coal mining from

2542-407: The Wrexham and District Electric Tramways ran from Johnstown to Wrexham through Rhostyllen, connecting the major mining villages with Wrexham General railway station and the town centre. Another explosion killed a number of men in 1909. This was the final major incident at Bersham, barring another in 1933, when the timber headgear burned to the ground. Replacement headgear which still stands today

Bersham Colliery - Misplaced Pages Continue

2624-564: The 1880s has been widely used to generate electricity. Steel and cement industries use coal as a fuel for extraction of iron from iron ore and for cement production. In the United Kingdom and South Africa , a coal mine and its structures are a colliery , a coal mine is called a "pit", and above-ground mining structures are referred to as a " pit head ". In Australia , "colliery" generally refers to an underground coal mine. Coal mining has had many developments in recent years, from

2706-646: The No.2 headgear with its wheel, and its engine house complete with electric winding gear. Other remaining buildings have remained as part of a small industrial estate. The site is owned by Wrexham County Borough Council . In 1999, the Shropshire Mines Trust arranged with the council to clean the site up and clean the remaining buildings with a view to create a Museum. They created the Bersham Colliery Trust to do this; however after clearing

2788-812: The U.S., Examples include the Sago Mine disaster of 2006, and the 2007 mine accident in Utah 's Crandall Canyon Mine , where nine miners were killed and six entombed. In the decade 2005–2014, US coal mining fatalities averaged 28 per year. The most fatalities during the 2005–2014 decade were 48 in 2010, the year of the Upper Big Branch Mine disaster in West Virginia, which killed 29 miners. Chronic lung diseases, such as pneumoconiosis (black lung) were once common in miners, leading to reduced life expectancy . In some mining countries black lung

2870-624: The US Department of Labor's Mine Safety and Health Administration (MSHA) show that between 1990 and 2004, the industry cut the rate of injuries by more than half and fatalities by two-thirds. But according to the Bureau of Labor Statistics , even in 2006, mining remained the second most dangerous occupation in America, when measured by fatality rate . These numbers, however, include all mining activities, and oil and gas mining contribute to

2952-673: The United States and proposed mines under development. The coal mining industry employs almost 2.7 million workers. The History of coal mining goes back thousands of years, with early mines documented in ancient China, the Roman Empire and other early historical economies. It became important in the Industrial Revolution of the 19th and 20th centuries, when it was primarily used to power steam engines, heat buildings and generate electricity. Coal mining continues as an important economic activity today, but has begun to decline due to

3034-528: The United States. One of the largest chemical grouting projects was the extension of the Pittsburgh Light Rail Transit subway when the foundations of six large buildings needed to be protected from ground movement and related building settlement. Pressure grouting can be low pressure or high pressure. "Jet grouting" is a general term used for high pressure grouting where the high pressure air, water and cementing grout are injected into

3116-461: The area, including Brymbo Steel Works and Shotton Steel Works. When the colliery first opened it was named Glan-yr-Afon (English: Riverside ) Colliery. Operated by Bersham Coal Company, the first shaft was sunk in 1864 on the site of a brickworks immediately adjacent to the Shrewsbury to Chester railway line , however due to difficulties the pit did not reach the main coal seams and the site

3198-456: The building through underpinning . Bersham Colliery was closed with the loss of 480 jobs in December 1986 due to unfavourable economic conditions and loss of markets. The large amounts of equipment still underground meant that salvage operations continued into 1987, however a great deal was left in place. Most of the surface buildings were demolished shortly after with the main exceptions of

3280-581: The coal mining jobs as part of a just transition ; however, renewable energy was not suitable in some of the geographies with high concentrations of miners, such as in China, which is far and away the leading coal-mining nation. Coal refuse (also described as coal waste, rock, slag, coal tailings, waste material, rock bank, culm, boney, or gob ) is the material left over from coal mining, usually as tailings piles or spoil tips . For every tonne of hard coal generated by mining, 400 kg (880 lb) of waste material remains, which includes some lost coal that

3362-497: The coal preparation (or wash) plant. Once this strip is empty of coal, the process is repeated with a new strip being created next to it. This method is most suitable for areas with flat terrain. Equipment to be used depends on geological conditions. For example, to remove overburden that is loose or unconsolidated, a bucket wheel excavator might be the most productive. The life of some area mines may be more than 50 years. The contour mining method consists of removing overburden from

Bersham Colliery - Misplaced Pages Continue

3444-863: The coal resource may cause burial and loss of topsoil, exposes parent material, and creates large infertile wastelands. Soil disturbance and associated compaction result in conditions conducive to erosion. Soil removal from the area to be surface-mined alters or destroys many natural soil characteristics, and reduces its biodiversity and productivity for agriculture. Soil structure may be disturbed by pulverization or aggregate breakdown. Top 10 hard and brown coal producers in 2012 were (in million metric tons): China 3,621, United States 922, India 629, Australia 432, Indonesia 410, Russia 351, South Africa 261, Germany 196, Poland 144, and Kazakhstan 122. Coal has been mined in every state of Australia, but mainly in Queensland, New South Wales and Victoria. It

3526-403: The colliery manager, William Pattison. In 1896, there were 711 men working at both shafts. There was further growth at the colliery, with 848 men working there by 1908, and 878 by 1918. As with most mining communities, sons followed their fathers into the mines; and the local communities of Rhostyllen, Rhosllannerchrugog and Johnstown grew in size around the coal industry in the area. By 1903,

3608-429: The developed world. Modern coal mining in the US has an average 23 deaths per year due to mine accidents (2001–2020). However, in lesser developed countries and some developing countries, many miners continue to die annually, either through direct accidents in coal mines or through adverse health consequences from working under poor conditions. China , in particular, has the highest number of coal mining related deaths in

3690-455: The disruptive activities of blasting, ripping, and excavating coal. Stripping of overburden eliminates and destroys archeological and historic features, unless they are removed beforehand. The removal of vegetative cover and activities associated with the construction of haul roads, stockpiling of topsoil, displacement of overburden and hauling of soil and coal increase the quantity of dust around mining operations. Dust degrades air quality in

3772-424: The early days of men tunneling, digging, and manually extracting the coal on carts to large open-cut and longwall mines. Mining at this scale requires the use of draglines , trucks, conveyors , hydraulic jacks , and shearers. The coal mining industry has a long history of significant negative environmental impacts on local ecosystems, health impacts on local communities and workers, and contributes heavily to

3854-571: The fatalities occurring in the first half of the 20th century. 3,242 died in 1907, the worst year ever; in 2020 there were five. Open cut hazards are principally mine wall failures and vehicle collisions; underground mining hazards include suffocation, gas poisoning, roof collapse, rock burst , outbursts , and gas explosions. Firedamp explosions can trigger the far more dangerous coal dust explosions, which can engulf an entire mine. Most of these risks are greatly reduced in modern mines, and multiple fatality incidents are now rare in most parts of

3936-457: The genetic soil profile, displaces or destroys wildlife and habitat, alters current land uses, and to some extent permanently changes the general topography of the area mined. Adverse impacts on geological features of human interest may occur in a coal strip mine. Geomorphic and geophysical features and outstanding scenic resources may be sacrificed by indiscriminate mining. Paleontological, cultural, and other historic values may be endangered due to

4018-399: The global environmental crises, such as poor air quality and climate change . For these reasons, coal has been one of the first fossil fuels to be phased out of various parts of the global energy economy . The major coal producing countries, though, such as China , Indonesia, India and Australia , have not reached peak production, with production increases replacing falls in Europe and

4100-700: The greatest use where ground conditions are variable, where access is restrictive, where environmental pollution aspects are significant, and where structural movements in service must be minimal. Mini-piled underpinning is generally used when the loads from the foundations need to be transferred to stable soils at considerable depths – usually in excess of 5 m (16 ft). Mini-piles may either be augured or driven steel cased, and are normally between 150 mm (5.9 in) and 300 mm (12 in) in diameter. Structural engineers will use rigs which are specifically designed to operate in environments with restricted headroom and limited space, and can gain access through

4182-450: The immediate area, has an adverse impact on vegetative life, and constitutes health and safety hazards for mine workers and nearby residents. Surface mining disrupts virtually all aesthetic elements of the landscape. Alteration of land forms often imposes unfamiliar and discontinuous configurations. New linear patterns appear as material is extracted and waste piles are developed. Different colors and textures are exposed as vegetative cover

SECTION 50

#1732781043394

4264-535: The inside of a building, and require the construction of tension and compression piles to each cap. These are normally linked by a beam. The pile and beam system usually involves constructing pairs of piles on either side of the wall and linking them with a pile cap to support the wall. The pile caps are usually linked by reinforced concrete beams to support the entire length of the wall. Piled raft underpinning systems are commonly used when an entire building needs to be underpinned. The internal floors are completely removed,

4346-460: The late 18th century onward, with further progress being driven by 19th-century and early 20th-century progress. However, oil and gas were increasingly used as alternatives from the 1860s onward. By the late 20th century, coal was, for the most part, replaced in domestic as well as industrial and transportation usage by oil , natural gas or electricity produced from oil, gas, nuclear power or renewable energy sources. By 2010, coal produced over

4428-404: The majority of fatalities. Coal mining resulted in 47 fatalities that year. One study, though, has suggested that hazards of modern mining are now more accretive with workers facing long-term health impacts, such as sleep deprivation, that build up over time. Strip mining severely alters the landscape, which reduces the value of the natural environment in the surrounding land. The land surface

4510-461: The method of extraction. For example, a study has found that among surface coal mine operations, dragline equipment produced the loudest sound at a range of 88–112 dBA. Within longwall sections, stageloaders used to transport coal from the mining face and shearers used for extraction represent some of the highest noise exposures. Auxiliary fans (up to 120 dBA), continuous mining machines (up to 109 dBA), and roof bolters (up to 103 dBA) represent some of

4592-551: The mine up until nationalisation in 1947. On 1 January 1947, along with the rest of the coal industry, Bersham was nationalised and placed under the control of the National Coal Board . The colliery was immediately modernised, completed in 1954 with a new block housing new pithead baths, canteen and offices designed to cater for up to 1,100 men. The pit ponies at Bersham numbering near 100, which had been underground for most, if not all of their lives, were retired in

4674-465: The mining workforce. in 2015 US coal mines had 65,971 employees, the lowest figure since EIA began collecting data in 1978. However, a 2016 study reported that a relatively minor investment would allow most coal workers to retrain for the solar energy industry. Coal mining has been a very dangerous activity and the list of historical coal mining disasters is long. In the U.S., 104,895 coal miners were killed in mine accidents since 1900, 90 percent of

4756-530: The mistake. Mass concrete underpinning is commonly used when permanent support is needed to comply with the Party Wall Act of 1996 in the construction of a new basement during a restoration, rehabilitation or redevelopment. In the United Kingdom most subsidence claims are for buildings at least 40 years old with shallow strip foundations . This is one of the most common types of foundations suffering from subsidence-related damage and according to

4838-537: The nearby home of the Yorke Family, Erddig Hall to remain out of danger. Unfortunately this did not prevent subsidence and in 1973, subsidence of 5 feet occurred, leaving the house structurally unsound. Eventually the owner of the estate, the last Squire Yorke had to move out of Erddig and left the property to the National Trust . The National Coal Board paid the trust compensation of £120,000 to stabilise

4920-469: The noisiest equipment within continuous mining sections. Exposures to noise exceeding 90 dBA can lead to adverse effects on workers' hearing. The use of administrative controls and engineering controls can be used to reduce noise exposures. Improvements in mining methods (e.g. longwall mining), hazardous gas monitoring (such as safety-lamps or more modern electronic gas monitors), gas drainage, electrical equipment , and ventilation have reduced many of

5002-590: The open pit methods, due to thickness of the seam 20–25 metres (60–90 feet). Coals occurring below 90 m (300 ft) are usually deep mined. However, there are open pit mining operations working on coal seams up to 300–460 metres (1,000–1,500 feet) below ground level, for instance Tagebau Hambach in Germany. When coal seams are near the surface, it may be economical to extract the coal using open-cut , also referred to as open-cast, open-pit, mountaintop removal or strip, mining methods. Opencast coal mining recovers

SECTION 60

#1732781043394

5084-421: The operation reaches a predetermined stripping ratio (tons of overburden/tons of coal), it is not profitable to continue. Depending on the equipment available, it may not be technically feasible to exceed a certain height of highwall. At this point, it is possible to produce more coal with the augering method in which spiral drills bore tunnels into a highwall laterally from the bench to extract coal without removing

5166-476: The orientation and application of the design. In detail, attention with design must be paid analytically to settlement, bursting, buckling, cracking, and interface consideration, whereas, from a practical viewpoint, corrosion resistance, and compatibility with the existing ground and structure must be regarded. Mini-piled underpinning schemes include pile and beam, cantilever pile-caps and piled raft systems. Cantilevered pile-caps are usually used to avoid disturbing

5248-408: The overburden. Mountaintop coal mining is a surface mining practice involving removal of mountaintops to expose coal seams, and disposing of associated mining overburden in adjacent "valley fills." Valley fills occur in steep terrain where there are limited disposal alternatives. Mountaintop removal mining combines area and contour strip mining methods. In areas with rolling or steep terrain with

5330-425: The potential to spontaneously ignite. Because most coal refuse harbors toxic components, it is not easily reclaimed by replanting with plants like beach grasses. The use of sophisticated sensing equipment to monitor air quality is common and has replaced the use of small animals such as canaries, often referred to as " miner's canaries ". In the United States, the increase in technology has significantly decreased

5412-399: The risks of rock falls, explosions, and unhealthy air quality. Gases released during the mining process can be recovered to generate electricity and improve worker safety with gas engines . Another innovation in recent years is the use of closed circuit escape respirators , respirators that contain oxygen for situations where mine ventilation is compromised. Statistical analyses performed by

5494-422: The same year and replaced with mechanical traction. The colliery reached its largest size in 1958, with 1,011 recorded at the site. In 1961, more mechanisation was brought into the mine, including conveyor belts to convey coal to the surface faster. With the expanding tunnels into the surrounding area, care had to be taken to avoid subsidence . To this end a large pillar of solid coal was left untouched to allow

5576-418: The seam for roof and floor conditions; topography, especially altitude and slope; climate; land ownership as it affects the availability of land for mining and access; surface drainage patterns; groundwater conditions; availability of labor and materials; coal purchaser requirements in terms of tonnage, quality, and destination; and capital investment requirements. Surface mining and deep underground mining are

5658-565: The seam in a pattern following the contours along a ridge or around the hillside. This method is most commonly used in areas with rolling to steep terrain. It was once common to deposit the spoil on the downslope side of the bench thus created, but this method of spoil disposal consumed much additional land and created severe landslide and erosion problems. To alleviate these problems, a variety of methods were devised to use freshly cut overburden to refill mined-out areas. These haul-back or lateral movement methods generally consist of an initial cut with

5740-411: The sign. The sign was removed in early October 2021 due to a dispute with the landowners, despite calls from locals for the sign to remain. 53°01′36″N 3°01′25″W  /  53.026571°N 3.023505°W  / 53.026571; -3.023505 Coal mine Coal mining is the process of extracting coal from the ground or from a mine. Coal is valued for its energy content and since

5822-468: The site and moving large amounts of mining artifacts to the site, they were disbanded with a lack of local interest. The most prominent landmark left by the colliery is that of its spoil tip, known as Bersham Tip. In 2003, a company called Bersham Glenside Ltd announced controversial plans to remove the tip and sell it to the building industry. Wrexham County Borough Council eventually refused planning permission for this to take place, and Cadw recommended

5904-432: The spoil deposited downslope or at some other site and spoil from the second cut refilling the first. A ridge of undisturbed natural material 15 to 20 ft (5 to 6 m) wide is often intentionally left at the outer edge of the mined area. This barrier adds stability to the reclaimed slope by preventing spoil from slumping or sliding downhill. The limitations of contour strip mining are both economic and technical. When

5986-556: The strong contribution coal plays in global warming and environmental issues, which result in decreasing demand and in some geographies, peak coal . Compared to wood fuels , coal yields a higher amount of energy per unit mass, specific energy or massic energy, and can often be obtained in areas where wood is not readily available. Though it was used historically as a domestic fuel, coal is now used mostly in industry, especially in smelting and alloy production, as well as electricity generation . Large-scale coal mining developed during

6068-476: The surface or overburden, of the mining area. The overburden is then removed by draglines or by shovel and truck. Once the coal seam is exposed, it is drilled, fractured and thoroughly mined in strips. The coal is then loaded onto large trucks or conveyors for transport to either the coal preparation plant or directly to where it will be used. Most open cast mines in the United States extract bituminous coal . In Canada, Australia, and South Africa, open cast mining

6150-482: The tip remain. However, upon appeal to the Welsh Assembly Government , this decision was overturned and removal of the tip is now likely to take place. Bersham Glenside Ltd have stated they will contribute money to the heritage of the colliery and will keep part of the tip that has become heavily wooded, closest to the colliery. On 16 August 2021, a " Hollywood-style sign ", spelling "WREXHAM",

6232-524: The two basic methods of mining. The choice of mining method depends primarily on depth, density, overburden, and thickness of the coal seam; seams relatively close to the surface, at depths less than approximately 55 m (180 ft), are usually surface mined. Coal that occurs at depths of 55 to 90 m (180 to 300 ft) are usually deep mined, but in some cases surface mining techniques can be used. For example, some western U.S. coal that occur at depths in excess of 60 m (200 ft) are mined by

6314-583: The word underpinning has evolved to encompass all abstract concepts that serve as a foundation. Mass concrete underpinning is one of the simplest forms of remedial underpinning at shallow depths. This type of underpinning is done by excavating "bays" along and under the existing foundation and filling them with mass concrete. It is sometimes called a "traditional" method to distinguish it from other types of underpinning like piling and needling. The latter often require underpinning specialists and may use proprietary underpinning systems. Mass concrete underpinning work

6396-441: The world, with official statistics claiming that 6,027 deaths occurred in 2004. To compare, 28 deaths were reported in the U.S. in the same year. Coal production in China is twice that in the US, while the number of coal miners is around 50 times that of the US, making deaths in coal mines in China 4 times as common per worker (108 times as common per unit output) as in the US. Mine disasters have still occurred in recent years in

6478-455: Was left abandoned until 1871 when the pit was deepened by new owners, the Barnes family of Liverpool; coal production started in 1874 with two shafts; No.1 at a diameter of 10 feet and depth of 420 yards, and No.2 shaft at a diameter of 12 feet and a depth of 421 yards. The colliery worked for six years without major incident until 1880, when a major underground explosion killed 9 men, among them

6560-531: Was mined, and 375.1 million tonnes was exported. In 2013/14, coal provided about 69% of Australia's electricity production. In 2013, Australia was the world's fifth-largest coal producer, after China, the United States, India, and Indonesia. However, in terms of proportion of production exported, Australia is the world's second largest coal exporter, as it exports roughly 73% of its coal production. Indonesia exports about 87% of its coal production. A court in Australia has cited climate change in ruling against

6642-493: Was purchased and moved from the nearby Gatewen Colliery at Broughton, Wrexham . Before 1935, mining at the colliery had been done by hand, with mechanisation appearing in the mine at this time. As the miners at Bersham had no experience with the machinery, miners from other local mines that did were brought in to assist, causing friction between the two groups. Mining was difficult in Bersham, with seams less than 2 feet high, and

6724-540: Was put up on top of the tip, facing west towards to A483. The local community and wider media speculated who and why the sign was put up. Many speculated the new owners of Wrexham A.F.C. , Hollywood stars Rob McElhenney and Ryan Reynolds were involved. The Hollywood pair denied involvement, so did Wrexham Council. On 20 August, the online car leasing company, Vanarama, the sponsor of the National League in which Wrexham A.F.C. play, said they were responsible for

#393606