Misplaced Pages

Buick Lucerne

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

The Buick Lucerne is a full-size car manufactured by General Motors from 2005 to 2011. Named for the city of Lucerne, Switzerland , it served as Buick's top-of-the-line sedan until it was replaced by the second generation Buick LaCrosse .

#97902

141-618: The Lucerne replaced the full-size LeSabre and the Park Avenue in the Buick range, and used a revised G platform , nonetheless referred to by GM as the H platform. The Lucerne was introduced with the standard 3.8 liter Buick V6 (also known as the GM 3800 engine ) or optional 4.6 liter Cadillac Northstar LD8 V8 as well as optional active suspension , marketed as Magnetic Ride Control . For 2005, all General Motors vehicles equipped with

282-426: A longitudinal engine layout and rear-wheel drive (or all-wheel drive). However, V8 engines have also occasionally been used in transverse engine front-wheel drive vehicles, sometimes using closer cylinder bore spacings and narrower cylinder bank angles to reduce their space requirements. The classification of 'big-block' or 'small-block' refers to the engine's external dimensions and does not necessarily indicate

423-544: A 2.5 L (153 cu in) V8 engine. BMW's first V8 engine was the 1954–1965 BMW OHV V8 engine , a petrol engine with overhead valves and all-aluminum construction. The company resumed production of V8 engines in 1992 with the BMW M60 aluminum double overhead camshaft engine, and V8 engines have remained in production until today. BMW's first turbocharged V8 engine was the 1998–2009 M67 twin-turbocharged diesel engine. The first turbocharged V8 petrol engine from BMW

564-465: A 350 four-barrel and 455 four-barrel V8s, both carried over from 1973 with revisions to meet the 1974 emission standards. New engine options for 1974 included a 455 two-barrel and the Stage 1 455 "performance package" which added dual exhausts, suspension upgrades and other equipment. New options for 1974 included radial-ply tires, GM's High Energy Ignition and a "low fuel" warning light that illuminated when

705-525: A 5.6 L (340 cu in) Chrysler LA engine and built on the chassis of a 1950s Chrysler Imperial. The 1934–1938 Tatra 77 rear-engined sedan was initially powered by 3.0 L (183 cu in) petrol V8, which was air-cooled and used an overhead camshaft that operated the valves using a 'walking beam' rocker arrangement. This model line continued until 1999 when the Tatra 700 ended production. Tatra also produced diesel V8 truck engines from

846-560: A 60-degree V-angle, since it was derived from the 60 degree V12 Rolls-Royce Meteor which in turn was based on the Rolls-Royce Merlin V12 engine . Other V-angles have been used occasionally. The Lancia Trikappa , Lancia Dilambda , and Lancia Astura , produced 1922–1939, used narrow angle V8 engines (based on the Lancia V4 engine ) with V-angles of 14–24 degrees. The 1932 Miller four-wheel drive racing cars used

987-570: A V-angle of 90 degrees and was built in displacements of 4.1 L (253 cu in) and 5.0 L (308 cu in), the latter being de-stroked to 5.0 L (304 cu in) in 1985. The Holden V8 engine was used in various models, including the Kingswood, Monaro, Torana, Commodore, and Statesman. Versions tuned for higher performance were sold by Holden Dealer Team and Holden Special Vehicles , including versions stroked to up to 5.7 L (350 cu in). The Holden V8 engine

1128-591: A V8 engine was the 1965 Chrysler Valiant (AP6) , which was available with an American-built 4.5 L (273 cu in) Chrysler engine. The first locally designed V8 Ford was the 1966 Ford Falcon (XR) and the first V8 Holden was the 1968 Holden HK , both using engines supplied by their parent companies in the United States. The first V8 engine to be mass-produced in Australia was the 1969–2000 Holden V8 engine . This cast-iron overhead valve engine used

1269-464: A V8 engine was the 1988 Audi V8 luxury sedan. Its first model to use a V8 diesel engine was the D2 A8 3.3 TDI in 2000. The first V8-engined Alfa Romeo road car was the 1967–1969 Alfa Romeo 33 Stradale mid-engined sports car, of which 18 were produced. This was followed by the 1970–1977 Alfa Romeo Montreal front-engined sports car. The engines for both cars are based on the 90-degree V8 engine from

1410-406: A V8 engine with a V-angle of 45 degrees. The 8-cylinder versions of the 1945 through 1966 EMD 567 diesel locomotive engine also used a V-angle of 45 degrees. Most V8 engines fitted to road cars use a cross-plane crankshaft since this configuration produces less vibration due to the perfect primary balance and secondary balance. The cross-plane crankshaft has the four crank pins (numbered from

1551-425: A bit lighter in weight for improved fuel economy along with the slightly more aerodynamic sheet metal which made the 1980 models look a little bigger than their 1977–79 counterparts but overall dimensions changed very little. Engine offerings were shuffled a bit for 1980 with the standard Buick 231 V6 and optional 350 V8 carried over from 1979, with the Buick 350 making its last appearance this year. New options included

SECTION 10

#1732783510098

1692-419: A chrome square grille somewhat similar to the 1958 Buick and "Delta-wing" fins back along with round taillights. The appearance was shared with two other Buick models, the mid-level Invicta and the top model Electra . While Invicta and Electra/225 models were powered by Buick's new 401-cubic-inch V8, LeSabre continued with the 364-cubic-inch V8 previously used in all Buicks in 1957 and 1958. In standard form,

1833-528: A common crankshaft and are arranged in a V configuration . The first known V8 was the Antoinette , designed by Léon Levavasseur , and built in 1904 by the French Antoinette company for use in speedboat racing, cars, and later, airplanes. Also in 1904, V8 engines began small-scale production by Renault and Buchet for use in race cars. Most engines use a V-angle (the angle between

1974-472: A conventional horizontal sweep unit. The 1963 LeSabre received a major facelift with even boxier body contours than 1961-62 models and revised rooflines on four-door hardtop sedans. Inside was a new instrument panel with round instruments shared with other big Buicks and the new personal-luxury Riviera coupe. New options this year included a seven-position tilt steering wheel/column, AM/FM radio and Electro-Cruise control. The same assortment of 401-cubic-inch V8s

2115-631: A federal safety mandate. The 1969 LeSabre and other Buicks also received a new steering column mounted ignition switch (relocated from the instrument panel) that also locked the steering wheel when the transmission was in Park. The ignition/locking steering column appeared on all 1969 General Motors cars one year ahead of the federal mandate requiring all cars to be so equipped. Also new was a variable-ratio power steering unit along with revised front suspension geometry for improved ride and handling under Buick's tradename of Accu-Drive. Steel rails were also built into

2256-748: A full-sized station wagon for 1970 under the Estate Wagon nameplate. Though it used the LeSabre's B-body, it rode on the C-body Electra 225's 127-inch (3,200 mm) wheelbase chassis. The Estate Wagon came standard with the 455 V8 and interior trims were similar to the LeSabre Custom and Wildcat. The 1965-70 GM B platform is the fourth best selling automobile platform in history after the Volkswagen Beetle , Ford Model T and

2397-512: A larger Buick-built 252 V6, an Oldsmobile-built 307 V8 and a 350 Diesel V8, also built by Oldsmobile. The LeSabre Sport Coupe continued with the four-barrel turbocharged 231 V6 as its standard and only available powerplant. The Sport Coupe was dropped from the line after 1980 along with the Turbo V6 engine due to slow sales, but the Turbo V6 continued on the Regal and Riviera. Following the demise of

2538-486: A major facelift, the new body design sharing only the roof and trunk lid with the 1959 model. The new Buick now sported a concave grille and horizontal headlights centered by Buick's then-new "Tri-Shield" logo, which is still in use today. Reintroduced to Electras and other Buicks for 1960 were the chrome " VentiPort " portholes first introduced in 1940 and last seen in 1957. LeSabre and Invicta models had three portholes while Electras and Electra 225s were "four-holers". Inside,

2679-462: A mix of imported and local parts. A 4.4 L (269 cu in) version of the Rover V8 engine was produced in Australia for the ill-fated 1973–1975 Leyland P76 sedan. The engine had an overhead valve design and was the only all-aluminum engine made in Australia. The 1958–1965 Hongqi CA72 was a luxury car, of which approximately 200 were built for government officials. It was powered by

2820-497: A new flat instrument panel shared with Electra and Riviera replaced the wrap-around cockpit dash of previous years and featured a horizontal sweep speedometer that read to only 100 mph compared to 120 mph in previous years and also included kilometer readings. Otherwise, interior trimmings received only minor revisions. Convertible production for both the LeSabre Custom and the Centurion convertibles were not very abundant in

2961-483: A new no-cost option was a 235-horsepower lower-compression two-barrel version of the 364 with a lower compression ratio to permit use of regular-grade gasoline instead of the premium fuel required with all other Buick engines. LeSabre and all other full-sized Buicks (joined by the compact Special this year) were completely restyled for 1961 featuring finless rear ends, more restrained use of chrome, and boxier sheetmetal. Wheelbases remained at 123 inches (3,100 mm) but

SECTION 20

#1732783510098

3102-527: A new option for this model only were Strato bucket seats with center console. This would be the final year for the Pontiac 301 and Oldsmobile 403 V8s on the option list. New sheet metal highlighted by new swept back grilles/headlights, new taillights and revised coupe rooflines were among the changes to the 1980 Buick LeSabre aside from the complete disappearance of Buick's traditional portholes (the C-body Electra would retain them until 1984). The cars were also

3243-415: A new top design to permit a full-width rear seat. The same assortment of 350 and 455 cubic-inch V8s were carried over but featured lowered compression ratios and other modifications in order to enable the use of lower-octane low-lead or unleaded gasoline as a result of a General Motors corporate mandate. Variable-ratio power steering and power front disc brakes were made standard equipment on all LeSabres at

3384-417: A padded instrument panel, outside driver-side rear view mirror and backup lights. Under the hood, the 300-cubic-inch V8 was replaced by a larger 340-cubic-inch V8 rated at 220 horsepower with two-barrel carburetor and available with either a standard three-speed manual transmission or optional two-speed automatic, but the four-speed manual was dropped from the option list. Ordering the LeSabre 400 option upgraded

3525-528: A raised rear roof and glass skylight over the back seat similar to the Oldsmobile Vista Cruiser . Starting in 1965, the LeSabre was available in two trim levels , the base LeSabre and the LeSabre Custom, which featured a more luxurious interior trim and also included the convertible body style not available in the base LeSabre line. Interiors were also new for 1965 with a revised instrument panel featuring two round dials nearly identical with

3666-490: A rear spoiler. All Lucernes received modest mid-cycle updates in 2008, adding optional blind spot monitoring and lane departure warning system and revised exterior colors. Two new trim levels, CXL Special Edition (with more standard features than regular CXL) and Super , were added for 2008. The 2009 Lucerne received small upgades, including a new base engine, the 3.9 L GM High Value LZ9 V6, Bluetooth phone connectivity, and XM NavTraffic. Flex-fuel technology

3807-468: A revised instrument panel featured "Mirromatic", where the speedometer, odometer and any warning light indicators are reflected from an adjustable tilt mirror inside the dashboard for comfortable viewing that would reduce unwanted glare and reflection. A new two-spoke steering wheel with horn bars was introduced, replacing the time-honored horn ring then still common to most automobiles. The 250- and 300-horsepower 364-cubic-inch V8s were continued from 1959, but

3948-478: A single overhead camshaft and was rear-mounted in the vehicles. The company's first V8 road car was the 1973–1974 Dino 308 GT4 mid-engined sports car. The engine is a 90-degree all-aluminum V8 with double overhead camshafts. In 1975, the 2.0 L (122 cu in) engine in the Ferrari 208 GT4 became the smallest production V8 engine ever produced. The model lineage of mid-engined V8 road cars continues to

4089-469: A small number of cars were so equipped. Automatic transmissions would once again reappear as standard equipment on LeSabres in mid-1971 and continue in such form until the model line's demise after 2005. LeSabres were rear-drive six-passenger vehicles from 1959 to 1985 (station wagons through 1990) featuring separate body-on-frame construction along with a longitudinally mounted front engine. The first downsized generation of LeSabres introduced in 1977 retained

4230-492: A standard three-speed manual with column shift for the base 350 two-barrel or optional three-speed Turbo Hydra-matic 350 automatic, which was standard equipment with the two 350 four-barrel engines. This transmission completely replaced the old two-speed automatic offered with the smaller base engines in past years, while the 455 was paired with the Turbo Hydra-matic 400. Buick now joined other GM divisions in marketing

4371-509: A stereo 8-track tape player. The standard drum brakes were upgraded with more cooling fins and a dual-master cylinder system was introduced. Engine and transmission offerings were unchanged from 1966. The 1968 LeSabre received a minor facelift including new grilles and taillights along with concealed windshield wipers. Inside was a revised instrument panel with square speedometer surrounded by other instruments with minor trim revisions for both base and Custom models. A new 350-cubic-inch V8 replaced

Buick Lucerne - Misplaced Pages Continue

4512-654: A strict ruleset to follow until the 1972 season, when engines were no longer allowed to be any bigger than 358 cu in (5.9 L) for the purpose of reducing speeds caused by the rapid aerodynamic advancements from 1969 to 1971. In the American Top Fuel class of drag racing, V8 engines displacing 500 cu in (8 L) today produce outputs of over 7,000 kW (10,000 hp). and 10,000 N⋅m (7,400 lb⋅ft). The engines used in Top Fuel and Funny car drag racing are typically based on

4653-493: A turbocharged 231 cubic-inch V6 with a four-barrel carburetor producing 165 BHP (SAE Net) at 4000 RPM and a rather useful 285 lb-ft at 2,800 rpm. Only minor changes including new grille and rear taillight patterns highlighted the 1979 LeSabre aside from the top-level LeSabre Custom of previous years being renamed the LeSabre Limited. The LeSabre Sport Coupe continued with the turbocharged V6 as standard equipment and

4794-488: A two-barrel high-compression (10.25 to 1) version rated at 280 horsepower with a low-compression regular fuel version of that same engine rated at 265 horsepower offered as a no-cost option. Optional at extra cost was the four-barrel 325-horsepower 401 which was standard on the Invicta, Electra 225 and the mid-year Invicta-based Wildcat coupe. Inside, interiors were mildly revised with the "Mirrormatic" speedometer replaced by

4935-409: Is considered to be the first V8 engine produced in significant quantities. The 1914 Cadillac L-head V8 engine is considered the first road-going V8 engine to be mass-produced in significant quantities, with 13,000 sold the first year. This engine was built in the United States and was greatly assisted by Cadillac's pioneering use of electric starter motors . The popularity of V8 engines in cars

5076-440: The 1962 , 1963 , 1964 , and 1965 seasons were won by drivers of V8-powered cars. From 1962 through 1965, the top three manufacturers in each season's Constructor's Championship all predominantly used V8 engines in their cars. In 1966, the engine capacity limits were increased to 3.0 L (183 cu in) (or 1.5 litres with a supercharger), and both the 1966 and 1967 Constructor's Championships were won by cars powered by

5217-559: The Alfa Romeo Tipo 33 racing car, and have double overhead camshafts and a dry sump. The 33 Stradale engine has a displacement of 2.00 L (122 cu in) and a flat-plane crankshaft, while the Montreal uses an engine enlarged to 2.6 L (160 cu in) and uses a cross-plane crankshaft. The 2007–2010 Alfa Romeo 8C Competizione / Spider sports cars are powered by a 4.7 L (290 cu in) version of

5358-632: The Australian Ford Falcon and Ford Fairlane models. It was also used in several low-volume DeTomaso sports cars and luxury sedans built in Italy. Australian production ceased in 1982 when Ford Australia temporarily stopped production of V8 cars. From 1991 until 2016, the Ford Falcon was available with the imported Ford Windsor , Ford Barra , or Ford Modular V8 engines; the latter was marketed as "Boss" and locally assembled from

5499-772: The Brabham-Repco V8 engine . From 1968 until 1981, the Cosworth DFV V8 engine dominated Formula One racing. During this time, the Manufacturers' Championship was won by Cosworth DFV-powered cars every season except 1975, 1976, 1977, and 1979, which 12-cylinder Ferraris won. After a long period of dominance, the Cosworth DFV was eventually outpaced by turbocharged straight-four and V6 engines. The next period of significant V8 usage in Formula One

5640-537: The Cadillac DTS . The plant won Initial Quality Awards from J.D. Power and Associates from 2004 through 2006. GM also lead all other automakers in Strategic Vision's Total Quality Index (TQI) The Super trim level was introduced at the 2007 New York Auto Show , featuring the 4.6 liter Northstar L37 V8; revised trim; an increase of 17 hp (13 kW) horsepower, and revised front styling and

5781-569: The Ferrari F136 engine with a cross-plane crankshaft. Ferrari's first contact with V8 engines was the Vittorio Jano -designed 1955 Lancia-Ferrari D50 , a Formula One racing car that the company acquired as part of its purchase of Lancia's Formula One racing department. The first Ferrari-developed V8 engines were used in the 1962 Ferrari 248 SP and Ferrari 268 SP sports prototype racing cars designed by Carlo Chiti . This engine had

Buick Lucerne - Misplaced Pages Continue

5922-661: The Hewitt Touring Car became the first car built in the United States with a V8 engine. The engine was designed and built by Edward R. Hewitt who emphasized the V8's superiority to the typical I4 and I6 and six-cylinder engines of the time because of its lower weight and easier to make crankshaft compared to the I6s of equal power as well as the V8 not taking much more space than a I4. The 1910 De Dion-Bouton — built in France—

6063-579: The Lada Riva . Like the other GM divisions, Buick completely restyled its B- and C-body cars for 1971. The full-size cars emerged larger and heavier than before and also ever after. The styling featured curved bodysides, long hoods and wide expanses of glass, similar to that of Chrysler Corporation's 1969 full-sized cars, but with a lower beltline than the Chrysler products. Semi-fastback rooflines were utilized on two-door hardtop coupes and convertibles had

6204-526: The 1915 Cadillac engine. A flat-plane crankshaft is used by many V8 engines fitted to racing cars. From the gas dynamics aspect, the flat-plane crankshaft allows for even exhaust gas pulses to be achieved with a simple exhaust system. The design was popularized in motor racing by the 1961–1965 Coventry Climax FWMV Formula One engine, and the 1967–1985 Cosworth DFV engine was highly successful in Formula One. Several production sports cars have used flat-plane V8 engines, such as every Ferrari V8 model (from

6345-653: The 1939 Tatra 81 to the present day Tatra 815 . French manufacturers were pioneering in their use of V8 engines in the early 1900s with the 1904 Antoinette aircraft engine (the first known V8 engine) and the 1910 De Dion-Bouton . However, there were few French automotive V8 engines in the following decades, with manufacturers such as Delage , Delahaye , Talbot-Lago , Bugatti , and Hotchkiss using six-cylinder or straight-eight engines instead. From 1935 until 1954, Matford (Ford's French subsidiary, later renamed to ' Ford SAF ') produced cars with V8 engines, closely based on contemporary American Ford models. Simca purchased

6486-458: The 1965 model year, featuring more rounded bodylines and Coke-bottle profiles with semi-fastback rooflines on two-door hardtop coupes. Wheelbases remained at 123 inches (3,100 mm), but a new perimeter frame shared with other GM B-body cars replaced the "X" frame used since 1961. Body styles were unchanged from 1964 except for the station wagon, which was dropped in favor of the stretched intermediate Special-based Buick Sport Wagon which featured

6627-459: The 1970 LeSabre. New features this year included a hidden radio antenna which amounted to two wires embedded in the windshield. Wheelbase was increased by one inch to 124 inches (3,100 mm), matching direct competitors such as Oldsmobile Delta 88, Mercury Monterey and Chrysler Newport. Both base and Custom models were again offered. Engines were revised with the standard 350 two-barrel V8 increased in horsepower from 230 to 260. A new option for 1970

6768-415: The 1972 federal and California emission standards with California-bound cars receiving EGR valves, which would be installed on engines of virtually all automobiles for nationwide sales in 1973. Inside, the instrument panel featured a new "FASTEN SEAT BELTS" light due to a new federal safety regulation and the buzzer which sounded when the key was left in the ignition also sounded upon starting the car to remind

6909-704: The 1973 Ferrari 308 GT4 to the 2019–present Ferrari F8 Tributo ), the Lotus Esprit V8 , the Porsche 918 Spyder , and the McLaren MP4-12C . The first V8 engine used in a road-going car was the 1905 Rolls-Royce built in the United Kingdom. This model was initially equipped with a 3.5 L (214 cu in) V8 engine. However, only three cars were made before Rolls-Royce reverted to using straight-six engines for their cars. In 1907,

7050-443: The 1977 Buick LeSabre was considerably smaller on the outside, headroom, rear seat legroom and trunk space were increased over the much larger 1976 model. The engine lineup consisted of an assortment of engines including the standard 231 cubic-inch Buick-built V6 and various optional powerplants including a Pontiac-built 301 cubic-inch V8, 350 cubic-inch V8s built by both Buick and Oldsmobile, and an Oldsmobile 403 cubic-inch V8. The V6

7191-407: The 1981 LeSabre, still offered in base and Limited models. The modified grille now had five (rather than four) rows of openings. Engine offerings included the 231 cubic-inch normally aspirated Buick V6 (standard on sedans and coupes although decidedly underpowered for a car weighing in at around 4,000 lbs.), or optional Olds 307 cubic-inch V8 (standard on wagons, optional on sedans and coupes) and

SECTION 50

#1732783510098

7332-481: The 2019–present Ferrari F8 Tributo . Five-valve-per-cylinder versions were used from 1994 until 2005 in the Ferrari F355 and Ferrari 360 . Turbocharging was introduced on the 1984–1987 Ferrari 288 GTO flagship car, and the range of entry-level mid-engined sports cars switched to turbocharging with the 2015 Ferrari 488 . The Formula One team resumed using V8 engines for the 2006–2013 seasons, beginning with

7473-455: The 3.8 L V6 become the first SULEV -compliant vehicles. The Lucerne featured a row of faux exhaust vents, marketed as " Ventiports ," on the front fenders, corresponding to the number of cylinders in the engine — three on each side for the V6 or four for the V8. The CXL trim package added numerous premium features. The Lucerne was manufactured at GM's Detroit/Hamtramck Assembly Plant alongside

7614-468: The 300 was rated at 210 horsepower with two-barrel carburetor and 9 to 1 compression ratio for use of regular fuel. Optionally available was a 250-horsepower version of the same engine with four-barrel carburetor and higher 11 to 1 compression ratio mandating the use of premium fuel. The LeSabre Estate Wagon came standard with the larger 325-horsepower 401 V8 from the Wildcat and Electra 225 models. Replacing

7755-407: The 350 cubic-inch Oldsmobile-built diesel V8 (optional on all models). All gasoline engines received GM's "Computer Command Control" system to control fuel mixture, spark advance, and emissions controls. The three-speed Turbo Hydra-Matic transmission was standard equipment with the V6 and the diesel V8. New this year was a Turbo Hydra-Matic 200 4-R four-speed automatic overdrive transmission paired with

7896-440: The 401 cubic-inch V8 used in the more expensive Invicta and Electra models. The 364, which was previously used in all Buicks in 1957 and 1958, was rated at 250 horsepower (190 kW) in standard form with an "economy" 235 horsepower (175 kW) version offered as a "no cost" option in 1960-61 and an optional power-pack version with four-barrel carburetor and dual exhausts that was rated at 300 horsepower (220 kW). For 1962–63,

8037-406: The 455 V8 and hardtop bodystyles. Changes included rectangular quad headlights placed into a unit with the turn signals set directly below and at the center was a new classic eggcrate grille, no longer integrated with the headlights, making it more prominent. The 1976 LeSabre was the only American full-size car with a standard V6 engine, which was Buick's brand-new 3.8-litre (231 CID) V6 engine. The V6

8178-505: The 8.2 L (500 cu in) V8 engine used in the 1971–1978 Cadillac Eldorado and BMW's 3.0 L (183 cu in) M60B30 V8 engine found in cars such as the BMW E34 530i. V8 engines intended for motorsport are often small and short-stroke to maximize RPMs and thus power. The Cosworth DFV 3.0 L (183 cu in) is such an engine. Due to its large external dimensions, V8 engines are typically used in cars that use

8319-628: The Buick 350 V8 after this year, Buick would only build V6 engines as a result of GM's emerging corporate engine policy dictating types of engines built by various divisions for use throughout the corporate lineup. According to the plan, Buick would build V6 engines, Pontiac would manufacture four-cylinder powerplants, Chevrolet would build four-cylinder, V6 and V8 engines, and V8s for larger and higher-priced cars would be sourced from Oldsmobile and Cadillac. This meant that from 1981 onward, V8-powered Buicks would feature Oldsmobile engines, both gasoline and diesel. Only minor grille and trim changes highlighted

8460-682: The Estate Wagon. The standard transmission with the base 300 two-barrel V8 was a three-speed column shift manual and a four-speed manual was available as an option with either engine. The new ST300 transmission carried over the variable pitch torque converter from the Dynaflow that had been used since the mid-1950s, while the first year for the ST400 featured a fixed-pitch converter. Inside, only minor trim/upholstery revisions were made. LeSabre and other full-sized Buicks were completely restyled for

8601-574: The Ford SAF in 1954 and continued to produce various models powered by the Ford Flathead V8 until 1969. After WW2, France imposed very steep tax horsepower charges - the owners of cars with engines above 2 L were financially penalized, so France had a small domestic market for larger-engined cars, such as the V8. Despite this, Facel Vega produced luxury and sports cars powered by Chrysler V8 engines from 1954 through 1964. One of

SECTION 60

#1732783510098

8742-407: The LeSabre came standard with a two-barrel carbureted version of the 401 V8 rated at 280 horsepower (210 kW), or a no-cost "economy" low-compression version rated at 260 horsepower (190 kW). Starting in 1964, all LeSabre models except the Estate Wagon shared their drivetrains with the midsize Buick models by switching to those models' smaller-displacement V8s at least as standard equipment for

8883-473: The Riviera for speedometer and other instruments much like the 1963–64 models along with new heating/air conditioning controls. Drivetrains were unchanged from 1964 with the 210-horsepower two-barrel carbureted 300-cubic-inch V8 the standard powerplant on all models with a standard three-speed manual transmission or optional four-speed manual or two-speed Super Turbine 300 automatic. Available at extra cost with

9024-485: The Super Turbine automatic transmission was discontinued in favor of a standard torque converter. The 1969 LeSabre received new sheetmetal with more squared off styling than the 1965-68 models including a formal roofline on coupes replacing the semi-fastback of previous years. Though the 1969 model was extensively restyled with new sheetmetal, the basic 1965 chassis and inner body structure were retained, along with

9165-402: The actual engine displacement. Engines with displacements from 6.0 to 6.6 L (366 to 403 cu in) have been classified as both small-block and big-block, depending on the particular manufacturer's range of engines. V8 engines have been used in many forms of motorsport, from Formula One , IndyCar , NASCAR , DTM and V8 Supercars circuit racing, to Top Fuel drag racing. Among

9306-522: The aluminium-conversion Chrysler 426 Hemi engine and run on highly explosive nitromethane fuel. The world's fastest non-jet-powered (i.e., piston-engine powered) wheeled land vehicle, the Speed Demon, which achieved a speed of 744.072 km/h (462.345 mph) in 2017, is powered by a V8 engine based on the Chevrolet small-block engine design. The first Australian-designed car to use

9447-434: The automatic transmission under the Turbo Hydra-matic trade name rather than the "Super Turbine" designation used since 1964. At the start of the model year, variable-ratio power steering and power drum brakes were optional equipment. Those items were made standard equipment on all LeSabres (and Wildcats) effective January 1, 1970. Power front disc brakes remained an extra-cost option. For the first time since 1964, Buick offered

9588-489: The automatic transmission was standard on the LeSabre and all other full-sized Buicks but in 1963 was moved back to the option list on LeSabres. For 1964, the Dynaflow-based Turbine Drive was replaced by two new automatic transmissions, the two-speed Super Turbine 300 and the three-speed Super Turbine 400 . A four-speed manual transmission was offered as a LeSabre option from 1963 to 1965 but only

9729-510: The buyer to a 260-horsepower 340 with four-barrel carburetor and higher 10.25 to 1 compression ratio along with the three-speed Super Turbine 400 automatic found in the larger engine Wildcat, Electra 225 and Riviera. Somewhat more rounded sheet metal and a swoopier fastback roofline for the two-door hardtop highlighted the 1967 LeSabre but chassis and inner body were unchanged along with drivetrains. Both base and Custom-level LeSabres were continued. New options for 1967 included front disc brakes and

9870-451: The compact Chevrolet Vega. It used the heater fan to draw air into the car from the cowl intake, and force it out through vents in the trunk lid or tailgate. In theory, passengers could enjoy fresh air even when the car was moving slowly or stopped, as in heavy traffic. In practice, however, it didn't work. However, within weeks of the 1971 models' debut, Buick and all other GM dealers received multiple complaints from drivers who complained that

10011-411: The crankshaft can be machined from a flat billet and does not require counterweights so it is lighter. However, it produces more vibration due to a secondary imbalance. Most early V8 road car engines also used a flat-plane crankshaft since this was simpler to design and build than a cross-plane crankshaft. Early flat-plane V8 engines included the 1910 De Dion-Bouton engine, the 1915 Peerless engine, and

10152-560: The doors (and rear quarter panels on coupes and convertibles) for improved side impact protection as was the case with all 1969 GM B- and C-body cars. Powertrains were unchanged from 1968 with the 230-horsepower 350 two-barrel V8 standard and available with a three-speed manual transmission or the two-speed Super Turbine 300 automatic while the LeSabre "400" package once again included a 280-horsepower 350 four-barrel engine and three-speed Super Turbine 400 automatic. Only minor detail changes including grille and taillight revisions were made to

10293-459: The driver and passengers to buckle up. The 1973 Buick LeSabre featured the larger federally mandated "5 mph" front bumper and a new vertical bar grille flowed across the entire lower front end and under the headlights, and turn signal below the bumper. Revised taillights were set in a larger rear bumper. Both the 350 and 455 V8s were revised with EGR valves used on both federal and California-emission equipped cars. The LeSabre Custom convertible

10434-432: The driver and right front passenger to buckle their seat belts in order to start the vehicle. The interlock was met with such a major public outcry that Congress rescinded the interlock regulation in late 1974 after a few early 1975 models were so equipped, permitting owners of all 1974 and the early 1975 models equipped with the interlock system to legally disconnect it. With the Centurion line discontinued after 1973, LeSabre

10575-401: The engine delivered 250 horsepower with a two-barrel carburetor and 10.25 to 1 compression ratio (with Dynaflow transmission; manual transmission cars had a lower 8.5 to 1 compression ratio but horsepower was still rated at 250). Optionally available was a four-barrel version of the 364 rated at 300 horsepower. A three-speed manual transmission was standard on LeSabre but most cars were built with

10716-545: The entry-level status in Buick's hierarchy of products offered. The 1962 Buick LeSabre was only moderately changed from the previous year with bodies taking on a few extra inches to give them a longer look along with new grilles and taillights. Two-door hardtop coupes received a new convertible-like roofline complete with simulated bows. Under the hood, the 364 cubic-inch V8 was replaced by the larger 401 cubic-inch V8 used in Invictas and Electra 225s. LeSabres came standard with

10857-455: The famous "3800" V6 for 1988, with 165 hp (123 kW). This engine increased to 170 hp (127 kW) in 1991 with the addition of Tuned Port Injection. The 1986 model featured the 3.0 liter (181 cubic-inch) V6 as standard. The sixth generation featured Dynaride, four wheel independent suspension, as well as automatic load leveling, which used an air compressor to pressurize the rear Chapman Struts to maintain level ride height — and

10998-460: The first German V8 engines was the 1928–1945 Argus As 10 aircraft engine. This engine was air-cooled, used an 'inverted V' design, and was used in several training, surveillance, and communications airplanes. From 1933 until 1940, the Horch 830 luxury cars were powered by V8 engines (sold alongside Horch's larger straight-eight engines). Shortly after, the 1934–1937 Stoewer Greif V8 was powered by

11139-399: The first V8 Formula One cars to compete were the 1952 AFM entry and the 1954 Lancia D50 , with a development of the latter powering Juan Manuel Fangio's 1956 car to victory in the driver's championship. The 1.5 L Formula One era of 1961–1965 included V8 engines from Ferrari, Coventry Climax, British Racing Motors (BRM), and Automobili Turismo e Sport (ATS). The driver's championships for

11280-424: The front bumper and wide horizontal taillights stretched above the new 5 mph rear bumper. Four-door pillared and hardtop sedans retained the same rooflines as 1973 but the two-door hardtop coupe featured a new roofline with a side rear opera windows (along with a small roll-down rear window). Inside, the instrument panel was substantially revised but retained the wrap-around theme. A new (and seldom ordered) option

11421-1342: The front outboard positions and three-point at the rear outboard positions — for coupe models with the start of 1987 production (September 1986) and for sedans beginning with December 1986 production. Superseding the 1986 Grand National, for 1987 Buick introduced the LeSabre T-Type (1987-1989). The packaged included featuring 15” aluminum wheels, blackwall tires, heavy duty engine and transmission cooling, revised suspension (marketed as Gran Touring ), 2.97 Final Drive Ratio, leather wrapped steering wheel and shift handle, tilt steering column, wipers with delay feature, electronic cruise control, red an amber tail lamps, dual exhaust outlets, black trim (side, belt, roof drip, wheel openings, tail lamps, door handles, lock cylinders and grille), flush hood ornament, black cloth 45/45 Seats, carpet savers, T-Type identification, rear deck spoiler, front air dam, stereo radio (with graphic equalizer, cassette tape and red backlighting),console with red backlighting, black trimmed operation controls (e.g., heating, air conditioning and steering column), analog gauge cluster(with red backlighting, voltmeter, oil pressure, tachometer and coolant temperature gage. Available exterior colors included silver, white, black and red. 1988: For 1988,

11562-443: The front was smoothed with simplified chrome molding and absent bumperettes. The LeSabre also featured GM's plastic body technologies, with high-stress plastic replacing traditional steel in the front fenders. The hood was now conventionally hinged from the rear, abandoning the previous generation's front-hinged design. V8 engine A V8 engine is an eight- cylinder piston engine in which two banks of four cylinders share

11703-441: The front when the faceplate was removed. The seats of a new full-foam design with headrests more squared off than 1969–70. Again, base and Custom model LeSabres were offered in the same sedan and coupe bodystyles while the convertible was a Custom-only offering. The LeSabre 455 model line was dropped for 1971 with the larger engine now being offered as an option on the regular base and Custom-series models. LeSabre Customs equipped with

11844-523: The front) at angles of 0, 90, 270, and 180 degrees, which results in a cross shape for the crankshaft when it is viewed from one end. The rumbling exhaust sound produced by a typical cross-plane V8 engine is partly due to the uneven firing order within each of the two banks of four cylinders. A usual firing order of L-R-L-L-R-L-R-R (or R-L-R-R-L-R-L-L) results in uneven intake and exhaust pulse spacing for each bank. When separate exhaust systems are used for each bank of cylinders, this uneven pulsing results in

11985-540: The fuel tank was down to four gallons. This would be the final year for the MaxTrac electronic traction control system as an option. The upscale LeSabre Luxus designation was dropped and replaced by the LeSabre Custom nameplate. 1975 also was the first year of the catalytic converter, and standard high energy ignition which was part of GM's Maximum Mileage System at the time Introduced in September 1974. The 1975 LeSabre

12126-468: The gasoline V8 engine for improved highway fuel economy. LeSabre and other GM cars for 1981 received new 35 PSI radial tires for improved rolling resistance and fuel economy. Few changes were made for the Buick LeSabre for 1982-83 other than revised grilles and trim items. The base LeSabre sedan and coupe models were dropped for 1983 with the LeSabre Custom now the entry-level model and paired with

12267-419: The lineup this year, easily identifiable by its full length chrome side molding with a brushed metal insert. The regular LeSabre had a narrow trim piece on the rear third of the body. Under the hood, the 401-cubic-inch V8 was replaced in LeSabre sedans and coupes by a smaller 300-cubic-inch V8 designed for the upsized Special/Skylark intermediates that replaced the aluminum V8 in those vehicles. In standard form,

12408-440: The new LeSabre "400" package was the 250-horsepower 300-cubic-inch V8 with four-barrel carburetion and 10.25 to 1 compression which required premium fuel, compared to the standard two-barrel engine that used regular fuel. The 400 package also included the more desirable Super Turbine "400" three-speed automatic transmission also found in Buick's higher-priced Wildcat, Electra 225 and Riviera models. Buick's engine–transmission practice

12549-488: The new SAE net figures based on an engine as installed in an automobile with accessories and emission controls hooked up, rather than the gross horsepower method of past years based upon a dynamometer rating from an engine not installed in a vehicle. With that, the standard 350 two-barrel V8 was rated at 160 net horsepower compared to 230 gross horsepower in 1971 while the top 455 V8 was rated at 250 net horsepower in 1972 compared to 315 in 1971. Engines were also revised to meet

12690-517: The new cars were slightly downsized in both length and width, and rode on a new X-frame chassis which included a conventional rear axle and driveshaft replacing the decades-old torque tube design. Inside were revised instrument panels retaining the "Mirrormatic" speedometer and new upholstery trims. The Estate station wagons received a " Cordaveen " vinyl interior as standard, with the regular cloth/Cordaveen combination interior available as an option. Engines were unchanged from previous years including

12831-449: The next few years with cubic-inch displacements of 300 (1964–65), 340 (1966–67) and 350 (1968–76). A large-displacement would not reappear in a LeSabre until 1970 when a 455 cubic-inch V8 was introduced as an option and was offered through 1976. Beginning with the downsized 1977 models and continuing through three subsequent generations of front-drive LeSabres introduced in 1986, 1992 and 2000, Buick's 3.8-liter (231 cubic-inch) V6 would become

12972-641: The norm on big cars from GM's medium-priced competitors such as the Chrysler Newport and Mercury Monterey , which offered the TorqueFlite and Cruise-O-Matic transmissions, respectively. New grilles and four-segmented taillights highlighted the facelifted 1966 LeSabre models. Also new was a revised instrument panel with a horizontal sweep speedometer replacing the round pod instruments and new interior door handles. Both base and Custom level series were continued. New standard safety features included

13113-400: The old Dynaflow-based two-speed automatic transmission were two new Super Turbine automatics. The two-speed Super Turbine 300 (shared with the intermediate-sized cars) was available with the standard two-barrel 300 V8 while the three-speed Super Turbine 400 (shared with other big Buicks and Rivieras) was standard with the 300 four-barrel and optional with the standard engine as well as the 401 in

13254-404: The optional 3.8 engine was replaced with the much-modified, balance shaft-equipped LN3 3800 (vin code C, aka pre-series I 3800). 1989: In the engine bay, 1989 models received revised positions for the battery, washer fluid tank, and coolant overflow tank. 1990: 1990 models received a revised tail light design and front bumper/grille, where the center grill element dropped slightly relative to

13395-415: The optional 455 engine got a "455" badge underneath the LeSabre nameplates on the front fenders instead of the "Custom" badge normally used. A revised grille and taillights lenses were among the styling changes for 1972. Out back, a small "BUICK" nameplate was located above the right-side taillight, replacing the larger block letters spelling "B U I C K" across the lower trunk lid between

13536-415: The optional two-speed Dynaflow automatic transmission that was standard equipment on the Invicta and Electra/225. A three-speed "Triple Turbine" Dynaflow variant was also available. Power steering and power brakes were optional and all 1959 Buicks used the unique 12-inch finned aluminum brake drums for improved stopping power that were originally introduced on the 1957 Roadmaster. The 1960 LeSabre received

13677-480: The outboard grill elements. For 1990, the T-Type trim package was dropped. 1991: 1991 models were largely identical to the 1990 model cars aside from a small power increase. Beginning in 1989 and continuing for several years, J.D. Power noted the LeSabre received as one of the highest rated automobiles in customer satisfaction based on factors such as quality and reliability. Production Figures: This LeSabre

13818-493: The outside and lighter than their predecessors, losing 700-800 pounds of weight and 10 to 15 inches (250 to 380 mm) of overall length. The full-sized cars were the beginning of a "corporate-wide" downsizing of vehicles in order to improve fuel economy ratings following the 1973-74 energy crisis that would filter down to intermediates in 1978, personal-luxury cars in 1979 and compacts in 1980 with subsequent downsizings of each line of vehicles scheduled in subsequent years. Although

13959-459: The previous 340. In standard form the 350 V8 delivered 230 horsepower with two-barrel carburetor and 9 to 1 compression ratio and came with a standard three-speed manual transmission or optional two-speed Super Turbine 300 automatic. The "LeSabre 400" option package included a 280-horsepower 350 four-barrel V8 with 10.25 to 1 compression and three-speed Super Turbine 400 automatic transmission. The "Switch-Pitch" torque converter used in conjunction with

14100-535: The rear-drive LeSabre Estate Wagon would soldier on unchanged a few more years). It was also the last LeSabre sedan and coupe to feature body-on-frame construction, V8 power and Buick's traditional all-coil suspension (the 1992–96 Roadmaster sedans would also be similarly built). The top-line LeSabre Limited became the LeSabre Limited Collectors Edition to mark the end of an era for the rear-drive sedan and coupe. Engine offerings included

14241-525: The rear-drive and body-on-frame construction, while the later-generation models introduced in 1986 switched to front-wheel-drive, unit-body construction and transversely mounted engine. Convertibles were offered each year through 1975 while two- and four-door hardtops were dropped after 1976 and only pillared body styles were offered from 1977 to 2005. Station wagons were offered through 1964 and then dropped for several years until being reintroduced in 1970 and continued until 1990 after which year they were moved to

14382-658: The revived Roadmaster series. LeSabres come in two versions: Custom and Limited. LeSabre and all other 1959 Buicks not only got new names, but all-new styling as well, adopting the new GM B- and C-body used on all of the corporation's full-sized cars (the larger C-body used in the Electra as well as the Oldsmobile 98 and all Cadillacs was basically a stretched out B-body rather than a distinct body and chassis for 1959–60). Wheelbases increased by one inch on all models. The new styling included slanted headlights in front along with

14523-407: The roofline of the four-door pillared sedans though vent windows were dropped on all models. Wheelbase remained at 123 inches (3,100 mm). Interiors were mildly revised with minor changes to the instrument panel including the movement of the heating/air conditioning controls to the left of the steering wheel, which was new this year. Headrests, previously optional, were now standard equipment due to

14664-693: The rumbling sound typically associated with V8 engines. However, racing engines seek to avoid these uneven exhaust pressure pulses to maximize the power output. The 1960s cross-plane V8 racing engines used long primary exhaust pipes (such as the Ford GT40 endurance racing car) or located the exhaust ports on the inside of the V-angle (such as the Lotus 38 IndyCar) to link the exhaust systems from each bank and provide even exhaust gas pulses),. A flat-plane crankshaft configuration provides two benefits. Mechanically,

14805-419: The side impact test. The IIHS also found that 2006-08 model year Lucerne had the highest fatality rate in the large 4-door car class. Buick LeSabre The Buick LeSabre is a full-size car made by the division Buick of General Motors from 1959 until 2005. Prior to 1959, this position had been retained by the full-size Buick Special model (1936–58). The "LeSabre", which is French for "the sabre ",

14946-749: The sixth generation LeSabre, using GM's newly developed front wheel drive H platform shared with the Oldsmobile Delta 88 and 1987 Pontiac Bonneville — a platform in most respects identical to the front-drive GM C platform . The LeSabre featured a front-hinged clamshell engine hood, shared with the Buick Electra and flush, aerodynamic styling — but without Buick's hallmark ventiports or sweepspear . Most Buick LeSabre models from this generation were powered by Buick's 3.8 liter (231 cubic-inch) V6 engine. It started out with 150 hp (112 kW). It added balance shafts to become

15087-418: The standard 231 V6 (sedans and coupes) or optional Olds 307 V8 (which came as standard in the wagons) and Oldsmobile 350 diesel V8 (available in all models). 1985 307s received roller lifters for reduced friction. Meanwhile, the Estate Wagon continued on largely unchanged as a LeSabre or an Electra through 1990. Production Figures: (For 1986-1990 wagon figures, see Buick Estate ) For 1986, Buick introduced

15228-424: The standard 250-horsepower 364-cubic-inch V8, no-cost regular fuel 235-horsepower 364 or the four-barrel 300-horsepower option of same engine available at extra cost. The two-speed Turbine Drive Dynaflow automatic transmission was standard equipment on LeSabres and all other full-sized Buicks this year, although a manual transmission was also available. The Ventiports returned to the side of the front fender denoting

15369-399: The standard 5.7-litre V8 (350 CID) and a four-barrel carburetor or optional 7.5-litre V8 (455 CID) with a four barrel. The 1975 Buick LeSabre now featured a larger, cross-hatched patterned grille which still ran the entire front of the car, dual headlights were once again set side by side instead of individually. Turn signals were located within the front bumper. A Buick tri-shield hood ornament

15510-532: The standard engine for most LeSabre models and V8 engines were dropped (except in station wagons) after the last of the rear-drive LeSabre sedans and coupes came off the line in 1985. For most years from 1959 to 1971, a three-speed manual transmission was standard equipment on all LeSabres but rarely ordered. Far more popular was the Turbine Drive automatic transmission (previously known as Dynaflow) along with power steering and power brakes. For 1961 and 1962,

15651-493: The start of the 1971 model year. In March, the Turbo Hydramatic transmission became standard equipment, and all Buick LeSabres would remain so equipped in base form until the nameplate's final year in 2005. The new body also featured a double shell roof for improved roll-over protection. Also new for '71 was a flow-through ventilation system utilizing vents mounted in the trunklid shared with other full-sized GM cars and

15792-457: The taillights in 1971. Also new for '72 was a one-year only 2 + 1 ⁄ 2 -mph front bumper. All B, C, and E body (large) GM cars received such a bumper for 1972. Interior trims received only slight revisions from 1971. A revised flow-through ventilation system utilizing vents in the doorjambs replaced the troublesome system used in 1971 with the trunklid vents. Both the 350 and 455 V8s were carried over from 1971 with horsepower ratings switched

15933-421: The two banks of cylinders) of 90 degrees. This angle results in good engine balance , which results in low vibrations. However, the downside is the greater width of the engine compared to those that use a smaller V-angle. V8 engines with a 60-degree V-angle were used in the 1996–1999 Ford Taurus SHO , the 2005–2011 Volvo XC90 , and the 2006–2009 Volvo S80 . The Ford engine used a 60-degree V-angle because it

16074-477: The upscale LeSabre Limited models in both coupe and sedan models. Engine offerings in these two years included the standard Buick 231 V6 or optional 252 V6, or optional Oldsmobile 307 (gasoline) or 350 (Diesel) V8s. A new front clip that largely resembled the Electra and wider and lower taillights were among the appearance changes for the 1984 Buick LeSabre, still offered in Custom and Limited models. The wagon model

16215-415: The vehicles' overall condition. The convertible mechanism used was called the 'scissor top' that folded inward on itself, instead of straight back. This was featured on all GM full-size convertibles from 1971 to 1976. Only minor styling changes highlighted the 1976 Buick LeSabre, which was the final year for the 1971-vintage bodyshell, the unpopular and rarely-ordered driver and passenger-side airbag option,

16356-467: The ventilation system pulled cold air into the car before the heater could warm up and could not be turned off. The ventilation system was extensively modified for 1972. Also new for the 1971 was an optional MaxTrac computerized traction control system. Inside was a new wrap-around cockpit style instrument panel that placed all controls and instruments within easy reach of the driver, along with easier serviceability with instruments and switches accessible from

16497-503: The world to aircraft-inspired design elements such as the wrap-around windshield and tail fins. In 1959 LeSabre became the new moniker for what had previously been known as the Buick Special . The Buick LeSabre was offered in a full line of body styles except between 1965 and 1969 when its station wagon variant was dropped from Buick's full-size offerings. In 1977, the LeSabre was downsized along with other GM full-size models, and

16638-399: The years 1971 to 1975. The rarest production in that time was the 1971 LeSabre Custom with just over 1,800 units built, and the most produced was the 1973 Centurion with slightly over 5,700 units built. Due to this very low production volume and the end of the full-size convertible era, this may make this series of ragtop LeSabre Custom and Centurion Convertibles quite collectable - depending on

16779-600: Was Buick's mid-level full-size sedan above the Special but below the Electra during the 1960s then remained in its market position when the Electra was replaced with the Park Avenue . The LeSabre was available as a 2-door convertible, sedan or hardtop, a 4-door sedan or hardtop and station wagon throughout its production. The LeSabre nameplate made its first appearance on the 1951 Le Sabre show car , which introduced

16920-526: Was a low-compression regular-fuel version of the 350 four-barrel rated at 285 horsepower and the high-compression premium fuel 350 four-barrel V8 was reworked with horsepower upped to 315 on a 10.25 to 1 compression ratio. Added to the lineup was a new LeSabre 455 line which shared interior and exterior trimmings with the LeSabre Custom and was powered by Buick's new 455 cubic-inch V8 with four-barrel carburetor, 10.25 to 1 compression and 370 horsepower, which also required premium fuel. Transmission offerings included

17061-902: Was a true hardtop, with small rear quarter windows that rolled down (in addition to a larger third rear side "opera window" that was fixed). Pontiac and Oldsmobile also offered the hardtop coupe in their lower-priced lines. 1976 was the last year for all GM pillarless body styles. To commemorate the Bicentennial of the United States, the standard colors available on all Buicks were Judicial Black, Liberty White, Pewter Gray, Potomac Blue, Continental Blue, Concord Green, Constitution Green, Mount Vernon Cream, Buckskin Tan, Musket Brown, Boston Red and Independence Red, with specially available colors on select models Congressional Cream, Revere Red, Colonial Yellow and Firecracker Orange. The 1977 Buick LeSabre and other GM B-body full-sized cars were considerably smaller on

17202-677: Was also used in touring car racing and formed the basis of the Repco-Holden engine used in Formula 5000 racing. In 1999, the Holden V8 engine began to be replaced by the imported General Motors LS1 V8 engine. In 1971, Ford Australia began local production of the Ford 'Cleveland' V8 , an overhead valve cast-iron engine. The engine was produced in displacements of 4.9 L (302 cu in) and 5.8 L (351 cu in) for use in

17343-432: Was an "Air Cushion Restraint System" which included driver- and passenger-side airbags along with a unique four-spoke steering wheel. This option, also available on Electra 225s and Rivieras as well as full-sized Oldsmobiles and Cadillacs, was not very popular and was dropped after the 1976 model year. New integrated seat and shoulder belts were introduced this year along with a federally mandated interlock system that required

17484-403: Was available only in pillared coupe, sedan and wagon body styles. In addition to being Buick's entry level vehicle, the LeSabre was consistently Buick's best selling full-size car. Of the four nameplates introduced in 1959 (LeSabre, Invicta, Electra, Electra 225), the LeSabre nameplate lasted the longest. From 1959 to 1961, the LeSabre was powered by a 364 cubic-inch V8 , which was smaller than

17625-549: Was based on a V6 engine with a 60-degree V-angle. Both the Ford and Volvo engines were used in transverse engine chassis, which were designed for a front-wheel-drive layout (with an on-demand all-wheel drive system in the case of the Volvos ). To reduce the vibrations caused by the unbalanced 60-degree V-angle, the Volvo engines used a balance shaft and offset split crankpins . The Rolls-Royce Meteorite tank engine also used

17766-448: Was carried over from 1962 but the three-speed manual transmission returned as standard equipment with the two-speed Turbine Drive automatic reverted to the option list. A new and rarely ordered option this year was a floor-mounted four-speed manual transmission. Minor facelifting with new grille and horizontal taillights replacing the 1963's vertical units highlighted the 1964 LeSabre. A somewhat better equipped "Custom" version also joined

17907-486: Was dropped for one year in 1984, before returning in 1985. The 252 V6 was dropped from the option list but all other engines returned including the 231 V6 (standard on coupes and sedans), or optional Oldsmobile 307 gasoline V8 (standard on wagons, optional on sedans and coupes) and Oldsmobile 350 Diesel V8 (optional all models). 1985 would be the final year for the rear-drive LeSabre before another downsizing and conversion to front-wheel-drive for 1986 (sedans and coupes only;

18048-508: Was dropped this year leaving the short-lived Centurion as Buick's only ragtop that year as the intermediate Skylark (replaced by the Century for 1973) lost its ragtop completely after the 1972 model year. The engine options continued largely unchanged. The 1974 Buick LeSabre appeared to have a stronger, more modern appearance with a more detailed vertical-barred grille, dual headlights were given individual bezels, turn signals were set within

18189-575: Was first used on the Mercedes-Benz M113 engine in 2002 and turbocharging was first used on non-commercial diesel V8 engines in 1999 with the OM628 and on petrol engines with the M278 engine in 2010. Porsche's first road car to use a V8 engine was the 1978 Porsche 928 coupe. Its first to use a V8 diesel engine was the second-generation Cayenne S Diesel in 2014. Audi's first road car to use

18330-496: Was from 2006 to 2013 , when the rules mandated use of 2.4 L (146 cu in) naturally-aspirated V8 engines, with regular power outputs between 730 and 810 hp (in order to reduce the power outputs being achieved by the previous 3.0 litre V10 engines). These were replaced by 1.6 litre turbocharged V6 engines for the 2014 and later seasons. V8 engines have dominated American premier stock car racing NASCAR series since its inaugural 1949 season . However, there wasn't

18471-428: Was introduced in 1991 for the 1992 model year, and was redesigned along the same lines as the previous year's Park Avenue . The two-door coupe was dropped, leaving only a four-door sedan from this point forward. The headlights were streamlined with a separated amber turn signal strip wrapping around the lower front fascia. The rear fascia featured a wider trunk mouth and lower lift over height to ease loading baggage while

18612-571: Was made available at no additional cost. For 2010, the Super's rocker panels, grille, and fog lights were added as standard equipment. The 2011 Lucerne was largely unchanged. The last was built on June 15, 2011. The second generation LaCrosse replaced it as Buick's flagship sedan for 2012. The Buick Lucerne earns a "Good" overall score in the Insurance Institute for Highway Safety (IIHS) front impact test, and an "Acceptable" score in

18753-651: Was not available on vehicles equipped with Gran Touring Suspension. Each year received slight design changes. 1986: At its inception, the LeSabre featured sealed-beam headlights. Exclusively for 1986, Buick offered the LeSabre Grand National model to homologate the coupe body-style for NASCAR competition. Fewer than 120 were made. The Grand National featured a black exterior with gray interior. 1987: 1987 models received composite headlamps with exchangeable bulbs. In compliance with U.S. passive restraint standards, front seat-belts were door-mounted for

18894-402: Was now Buick's only B-body full-sized car. The base LeSabre was continued, but a new LeSabre Luxus series replaced both the LeSabre Custom and the Centurion. The Luxus convertible also returned the ragtop to the LeSabre line after a one-year absence and was Buick's only ragtop. Engine offerings were revised for 1974. The 350 two-barrel remained standard on all models with optional engines including

19035-472: Was only offered on the base-level LeSabre and not mentioned in initial 1976 Buick literature issued in September 1975 because the V6 engine was a last-minute addition to the line. The 350-cubic-inch V8 was the base engine on the LeSabre Custom and the 455-cubic-inch V8 was optional. Both V8s were optional on the base LeSabre. Unlike the full size Chevrolet and other competing big coupes, Buick's full size LeSabre coupe

19176-466: Was significantly increased following the 1932 introduction of the Ford Flathead V8 . By the early 21st century, the use of V8 engines in passenger vehicles declined as automobile manufacturers opted for more fuel efficient , lower capacity engines, or hybrid and electric drivetrains . The displacement of modern V8 engines is typically from 3.5 to 6.4 L (214 to 391 cu in). However, larger and smaller examples have been produced, such as

19317-565: Was similar to that of GM's Chevrolet Division, which at that time only offered the two-speed Powerglide automatic with most of its engine offerings in full-sized vehicles, requiring buyers who preferred the similar three-speed Turbo-Hydramatic (basically the same transmission under a different name) to order one of the larger V8 engines. Both Pontiac and Oldsmobile offered the Turbo Hydra-Matic on all of their full-sized cars with any engine offering, and three-speed automatics were also

19458-488: Was standard in base and Custom coupes and sedans, the 301 V8 on the new LeSabre Sport Coupe and the 350 V8 on the Estate Wagon. The pillarless hardtop body styles were no longer available. Following a major downsizing and redesign, the 1978 Buick LeSabre received only minor changes including new grillework. Engine offerings were unchanged from 1977 on most models, but the LeSabre Sport Coupe was now powered by

19599-536: Was standard on the Custom Series and optional on the base series. The three-hole 'ventiports' were moved from the hood to the front fenders. Slightly larger but narrower taillamps draped the back of the car with back-up lights positioned in the center broken up by the license plate. Four-door pillared sedans received a new small third windows to emulate the six-window "Colonnade" styling of GM intermediates while four-door hardtop sedans had new opera windows. Inside,

19740-496: Was the 2008–present BMW N63 engine. Their first eight-cylinder engine since passenger car and motorsport straight-eight engine production stopped in 1944 and 1955 respectively, Mercedes-Benz began production of the Mercedes-Benz M100 petrol V8 engine in 1963 and has continued production of V8 engines to the present day. The M100 had a single overhead camshaft, a cast-iron block, and an aluminium head. Supercharging

19881-501: Was the first to require use of unleaded gasoline, due to the advent of the catalytic converter. The LeSabre lineup offered a coupe and two sedans while the LeSabre Custom lineup offered the coupe, two sedans, and the only convertible in the Buick lineup. 1975 would be the final year for the LeSabre Custom Convertible with around 5,300 examples rolling off the assembly lines. Engine offerings were reduced to just two:

#97902