Misplaced Pages

#743256

89-453: According to the project's website, it is the largest underground network of pipes (2,820 kilometres (1,750 mi)) and aqueducts in the world. It consists of more than 1,300 wells , most more than 500 m deep , and supplies 6,500,000 m of fresh water per day to the cities of Tripoli , Benghazi , Sirte and elsewhere in Libya. The late Libyan Leader Muammar Gaddafi described it as

178-591: A comprehensive assessment of the site and establishing the necessary groundwork for a successful drilling operation. Here's a breakdown of the key aspects involved: Before drilling can begin, a thorough site assessment is conducted to determine the optimal drilling locations. This assessment involves evaluating factors such as the type of material to be drilled, subsurface conditions, potential obstacles (e.g., underground utilities), and structural integrity. This information helps identify suitable areas for drilling that minimize risks and ensure accurate results. Depending on

267-528: A gold mine in the Witwatersrand, the orebody can be massive similar to the Olympic Dam mine , South Australia, or Cadia-Ridgeway Mine , New South Wales . The width or size of the orebody is determined by the grade as well as the distribution of the ore. The dip of the orebody also has an influence on the mining method for example a narrow horizontal vein orebody will be mined by room and pillar or

356-636: A hopper and a shaking screen or trommel which frees the desired minerals from the waste gravel. The minerals are then concentrated using sluices or jigs. Large drills are used to sink shafts, excavate stopes, and obtain samples for analysis. Trams are used to transport miners, minerals and waste. Lifts carry miners into and out of mines, and move rock and ore out, and machinery in and out, of underground mines. Huge trucks, shovels and cranes are employed in surface mining to move large quantities of overburden and ore. Processing plants use large crushers, mills, reactors, roasters and other equipment to consolidate

445-416: A longwall method whereas a vertical narrow vein orebody will be mined by an open stoping or cut and fill method. Further consideration is needed for the strength of the ore as well as the surrounding rock. An orebody hosted in strong self-supporting rock may be mined by an open stoping method and an orebody hosted in poor rock may need to be mined by a cut and fill method where the void is continuously filled as

534-883: A mass of actual rock. Both types of ore deposit, placer or lode, are mined by both surface and underground methods. Some mining, including much of the rare earth elements and uranium mining , is done by less-common methods, such as in-situ leaching : this technique involves digging neither at the surface nor underground. The extraction of target minerals by this technique requires that they be soluble, e.g., potash , potassium chloride , sodium chloride , sodium sulfate , which dissolve in water. Some minerals, such as copper minerals and uranium oxide , require acid or carbonate solutions to dissolve. Explosives in Mining Explosives have been used in surface mining and sub-surface mining to blast out rock and ore intended for processing. The most common explosive used in mining

623-426: A mining operation. Once the analysis determines a given ore body is worth recovering, development begins to create access to the ore body. The mine buildings and processing plants are built, and any necessary equipment is obtained. The operation of the mine to recover the ore begins and continues as long as the company operating the mine finds it economical to do so. Once all the ore that the mine can produce profitably

712-503: A more sustainable future, the demand for metals is set to skyrocket. Between 2022 and 2050, an estimated 7 billion metric tons of metals will need to be extracted. Steel will account for the largest portion of this total at 5 billion tons, followed by aluminum at 950 million tons, copper at 650 million tons, graphite at 170 million tons, nickel at 100 million tons, and other metals. Notably, the energy expenditure required to extract these metals will soon surpass that of coal mining, highlighting

801-412: A reel. In shallower mines the ore is then dumped into a truck to be hauled to the surface. In deeper mines, the ore is dumped down an ore pass (a vertical or near vertical excavation) where it falls to a collection level. On the collection level, it may receive primary crushing by a jaw or cone crusher, or by a rockbreaker . The ore is then moved by conveyor belts , trucks or occasionally trains to

890-428: A rock or mineral that contains valuable constituent, can be extracted or mined and sold for profit. Mining in a wider sense includes extraction of any non-renewable resource such as petroleum , natural gas , or even water . Modern mining processes involve prospecting for ore bodies, analysis of the profit potential of a proposed mine, extraction of the desired materials, and final reclamation or restoration of

979-408: A strong inducement to extract these metals or to lease the deposits and collect royalties from mine operators. English, German , and Dutch capital combined to finance extraction and refining . Hundreds of German technicians and skilled workers were brought over; in 1642 a colony of 4,000 foreigners was mining and smelting copper at Keswick in the northwestern mountains. Use of water power in

SECTION 10

#1732765232744

1068-419: A timeline for the core drilling project is essential for effective project management. This includes setting deadlines, scheduling equipment and personnel, and coordinating with other stakeholders involved in the project. Logistics, such as transportation of equipment and materials to the site, are also planned during this stage. Declines are often started from the side of the high wall of an open cut mine when

1157-651: Is ammonium nitrate . Between 1870 and 1920, in Queensland Australia, an increase in mining accidents lead to more safety measures surrounding the use of explosives for mining. In the United States of America, between 1990 and 1999, about 22.3 billion kilograms of explosives were used in mining quarrying and other industries; Moreover " coal mining used 66.4%, nonmetal mining and quarrying 13.5%, metal mining 10.4%, construction 7.1%, and all other users 2.6%". Artisanal and small-scale mining (ASM)

1246-811: Is a blanket term for a type of subsistence mining involving a miner who may or may not be officially employed by a mining company but works independently, mining minerals using their own resources, usually by hand. While there is no completely coherent definition for ASM, artisanal mining generally includes miners who are not officially employed by a mining company and use their own resources to mine. As such, they are part of an informal economy . ASM also includes, in small-scale mining, enterprises or individuals that employ workers for mining, but who generally still use similar manually-intensive methods as artisanal miners (such as working with hand tools). In addition, ASM can be characterized as distinct from large-scale mining (LSM) by less efficient extraction of pure minerals from

1335-476: Is done by removing surface vegetation, dirt, and bedrock to reach buried ore deposits. Techniques of surface mining include: open-pit mining , which is the recovery of materials from an open pit in the ground; quarrying , identical to open-pit mining except that it refers to sand, stone and clay; strip mining , which consists of stripping surface layers off to reveal ore underneath; and mountaintop removal , commonly associated with coal mining, which involves taking

1424-443: Is further broken down into two methods, long hole and short hole. Short hole mining is similar to development mining, except that it occurs in ore. There are several different methods of long hole mining. Typically, long hole mining requires two excavations within the ore at different elevations below surface, (15 m – 30 m apart). Holes are drilled between the two excavations and loaded with explosives. The holes are blasted and

1513-613: Is mining upward, creating a sloping underground room, long wall mining , which is grinding a long ore surface underground, and room and pillar mining, which is removing ore from rooms while leaving pillars in place to support the roof of the room. Room and pillar mining often leads to retreat mining , in which supporting pillars are removed as miners retreat, allowing the room to cave in, thereby loosening more ore. Additional sub-surface mining methods include hard rock mining , bore hole mining, drift and fill mining, long hole slope mining, sub level caving, and block caving . Heavy machinery

1602-484: Is much more common, and produces, for example, 85% of minerals (excluding petroleum and natural gas) in the United States, including 98% of metallic ores. Targets are divided into two general categories of materials: placer deposits , consisting of valuable minerals contained within river gravels, beach sands, and other unconsolidated materials ; and lode deposits , where valuable minerals are found in veins, in layers, or in mineral grains generally distributed throughout

1691-413: Is not of immediate interest to the miner. The total movement of ore and waste constitutes the mining process. Often more waste than ore is mined during the life of a mine, depending on the nature and location of the ore body. Waste removal and placement is a major cost to the mining operator, so a detailed characterization of the waste material forms an essential part of the geological exploration program for

1780-584: Is recovered, reclamation can begin, to make the land used by the mine suitable for future use. Technical and economic challenges notwithstanding, successful mine development must also address human factors. Working conditions are paramount to success, especially with regard to exposures to dusts, radiation, noise, explosives hazards, and vibration, as well as illumination standards. Mining today increasingly must address environmental and community impacts, including psychological and sociological dimensions. Thus, mining educator Frank T. M. White (1909–1971), broadened

1869-407: Is removed ("mucked out" or "bogged") from the stope using center articulated vehicles . These vehicles are referred to as "boggers" or LHD (Load, Haul, Dump machines) . These pieces of equipment may operate using diesel engines or electric motors , and resemble a low-profile front end loader . Electrically powered LHD utilize trailing cables which are flexible and can be extended or retracted on

SECTION 20

#1732765232744

1958-417: Is required in order to maintain the stability of the openings that are excavated. This support comes in two forms; local support and area support. Area ground support is used to prevent major ground failure. Holes are drilled into the back (ceiling) and walls and a long steel rod (or rock bolt ) is installed to hold the ground together. There are three categories of rock bolt, differentiated by how they engage

2047-494: Is the extraction of valuable geological materials and minerals from the surface of the Earth . Mining is required to obtain most materials that cannot be grown through agricultural processes , or feasibly created artificially in a laboratory or factory. Ores recovered by mining include metals , coal , oil shale , gemstones , limestone , chalk , dimension stone , rock salt , potash , gravel , and clay . The ore must be

2136-656: Is the largest producer of diamonds in Africa, with an estimated 12 million carats in 2019. Other types of mining reserves in Africa include cobalt , bauxite , iron ore , coal, and copper . Gold and coal mining started in Australia and New Zealand in the 19th century. Nickel has become important in the economy of New Caledonia . In Fiji , in 1934, the Emperor Gold Mining Company Ltd. established operations at Vatukoula , followed in 1935 by

2225-423: Is to conduct a feasibility study to evaluate the financial viability, the technical and financial risks, and the robustness of the project. This is when the mining company makes the decision whether to develop the mine or to walk away from the project. This includes mine planning to evaluate the economically recoverable portion of the deposit, the metallurgy and ore recoverability, marketability and payability of

2314-445: Is uneconomical, the open stope is filled with backfill, which can be a cement and rock mixture, a cement and sand mixture or a cement and tailings mixture. This method is popular as the refilled stopes provide support for the adjacent stopes, allowing total extraction of economic resources. The mining method selected is determined by the size, shape, orientation and type of orebody to be mined. The orebody can be narrow vein such as

2403-419: Is used in mining to explore and develop sites, to remove and stockpile overburden, to break and remove rocks of various hardness and toughness, to process the ore, and to carry out reclamation projects after the mine is closed. Bulldozers, drills, explosives and trucks are all necessary for excavating the land. In the case of placer mining , unconsolidated gravel, or alluvium , is fed into machinery consisting of

2492-521: The Greek author Diodorus Siculus , who mentions fire-setting as one method used to break down the hard rock holding the gold . One of the complexes is shown in one of the earliest known mining maps. The miners crushed the ore and ground it to a fine powder before washing the powder for the gold dust known as the dry and wet attachment processes. Mining in Europe has a very long history. Examples include

2581-480: The Second Libyan Civil War from 2014 to 2020, the water infrastructure suffered neglect and occasional breakdowns. As of July 2019, 101 of 479 wells on the western pipeline system had been dismantled. On 10 April 2020, a station controlling water flow to Tripoli and neighboring towns was seized by an unknown armed group. The flow of water was cut to over two million people as a result, and as such

2670-517: The argentiferous galena in the mines of Cartagena ( Cartago Nova ), Linares ( Castulo ), Plasenzuela and Azuaga , among many others. Spain was one of the most important mining regions, but all regions of the Roman Empire were exploited. In Great Britain the natives had mined minerals for millennia , but after the Roman conquest , the scale of the operations increased dramatically, as

2759-836: The greenstone of the Langdale axe industry based in the English Lake District . The oldest-known mine on archaeological record is the Ngwenya Mine in Eswatini (Swaziland) , which radiocarbon dating shows to be about 43,000 years old. At this site Paleolithic humans mined hematite to make the red pigment ochre . Mines of a similar age in Hungary are believed to be sites where Neanderthals may have mined flint for weapons and tools. Ancient Egyptians mined malachite at Maadi . At first, Egyptians used

Great Man-Made River - Misplaced Pages Continue

2848-423: The shaft to be hoisted to the surface in buckets or skips and emptied into bins beneath the surface headframe for transport to the mill. In some cases the underground primary crusher feeds an inclined conveyor belt which delivers ore via an incline shaft direct to the surface. The ore is fed down ore passes, with mining equipment accessing the ore body via a decline from the surface. Mining Mining

2937-529: The " Eighth Wonder of the World ". In 1953, efforts to find oil in southern Libya led to the discovery of large quantities of potable fossil water underground. The Great Man-Made River Project (GMRP) was conceived in the late 1960s and work on the project began in 1984. The project's construction was divided into five phases. The first phase required 85 million m³ of excavation and was inaugurated on 28 August 1991. The second phase (dubbed First water to Tripoli )

3026-509: The 21st century begins, a globalized mining industry of large multinational corporations has arisen. Peak minerals and environmental impacts have also become a concern. Different elements, particularly rare-earth minerals , have begun to increase in demand as a result of new technologies. In 2023, 8.5 billion metric tons of coal were extracted from the Earth's crust. However, as the global economy transitions away from fossil fuels and toward

3115-680: The 7th century to the 14th century. Gold was often traded to Mediterranean economies that demanded gold and could supply salt , even though much of Africa was abundant with salt due to the mines and resources in the Sahara desert . The trading of gold for salt was mostly used to promote trade between the different economies. Since the Great Trek in the 19th century, after, gold and diamond mining in Southern Africa has had major political and economic impacts. The Democratic Republic of Congo

3204-675: The French crown to operate mines in 1733, becoming "the first practical miner on Lake Superior"; seven years later, mining was halted by an outbreak between Sioux and Chippewa tribes. Mining in the United States became widespread in the 19th century, and the United States Congress passed the General Mining Act of 1872 to encourage mining of federal lands. As with the California Gold Rush in

3293-643: The Loloma Gold Mines, N.L., and then by Fiji Mines Development Ltd. (aka Dolphin Mines Ltd.). These developments ushered in a “mining boom”, with gold production rising more than a hundred-fold, from 931.4 oz in 1934 to 107,788.5 oz in 1939, an order of magnitude then comparable to the combined output of New Zealand and Australia's eastern states. During prehistoric times, early Americans mined large amounts of copper along Lake Superior 's Keweenaw Peninsula and in nearby Isle Royale ; metallic copper

3382-481: The Romans needed Britannia 's resources, especially gold , silver , tin , and lead . Roman techniques were not limited to surface mining. They followed the ore veins underground once opencast mining was no longer feasible. At Dolaucothi they stoped out the veins and drove adits through bare rock to drain the stopes. The same adits were also used to ventilate the workings, especially important when fire-setting

3471-598: The Spanish to pulverize ore after being mined. This device was powered by animals and used the same principles used for grain threshing . Much of the knowledge of medieval mining techniques comes from books such as Biringuccio 's De la pirotechnia and probably most importantly from Georg Agricola 's De re metallica (1556). These books detail many different mining methods used in German and Saxon mines. A prime issue in medieval mines, which Agricola explains in detail,

3560-756: The Umm el-Sawwan site; gypsum was used to make funerary items for private tombs. Other minerals mined in Egypt from the Old Kingdom (2649-2134 BC) until the Roman Period (30 BC-AD 395) including granite , sandstone , limestone , basalt , travertine , gneiss , galena , and amethyst . Mining in Egypt occurred in the earliest dynasties. The gold mines of Nubia were among the largest and most extensive of any in Ancient Egypt. These mines are described by

3649-603: The attack was condemned by the United Nations on humanitarian grounds. 25°27′20″N 21°36′03″E  /  25.45556°N 21.60083°E  / 25.45556; 21.60083 Underground mining (hard rock)#Development mining vs. production mining Underground hard-rock mining refers to various underground mining techniques used to excavate "hard" minerals , usually those containing metals , such as ore containing gold , silver , iron , copper , zinc , nickel , tin , and lead . It also involves

Great Man-Made River - Misplaced Pages Continue

3738-624: The beginning of civilization, people have used stone , clay and, later, metals found close to the Earth's surface. These were used to make early tools and weapons; for example, high quality flint found in northern France , southern England and Poland was used to create flint tools . Flint mines have been found in chalk areas where seams of the stone were followed underground by shafts and galleries. The mines at Grimes Graves and Krzemionki are especially famous, and like most other flint mines, are Neolithic in origin (c. 4000–3000 BC). Other hard rocks mined or collected for axes included

3827-528: The bright green malachite stones for ornamentations and pottery . Later, between 2613 and 2494 BC, large building projects required expeditions abroad to the area of Wadi Maghareh in order to secure minerals and other resources not available in Egypt itself. Quarries for turquoise and copper were also found at Wadi Hammamat , Tura , Aswan and various other Nubian sites on the Sinai Peninsula and at Timna . Quarries for gypsum were found at

3916-500: The costs of the $ 25 billion groundwater extraction system are 10% those of desalination. In this project 1 billion euros were invested for the installation of 50,000 artificial palm trees for water condensation. This project was carried out by the Spanish engineer Antonio Ibáñez de Alba. On 22 July 2011, during the First Libyan Civil War and the foreign military intervention , one of the two plants making pipes for

4005-417: The cutter-head is progressively launched further into the coal seam. High wall mining can produce thousands of tons of coal in contour-strip operations with narrow benches, previously mined areas, trench mine applications and steep-dip seams. Sub-surface mining consists of digging tunnels or shafts into the earth to reach buried ore deposits. Ore, for processing, and waste rock, for disposal, are brought to

4094-639: The entry port of Brega ( Gulf of Sidra ). Cathodic corrosion protection on the pipeline was supplied by an Australian company, AMAC Corrosion Protection, based in Melbourne and delivered via the port of Benghazi. The rest of the material was made in Libya. The total cost of the GMRP was projected at more than US$ 25 billion. Libya has completed the work to date without the financial support of major countries or loans from world banks. Since 1990, UNESCO has provided training to engineers and technicians involved with

4183-698: The focus to the “total environment of mining”, including reference to community development around mining, and how mining is portrayed to an urban society, which depends on the industry, although seemingly unaware of this dependency. He stated, “[I]n the past, mining engineers have not been called upon to study the psychological, sociological and personal problems of their own industry – aspects that nowadays are assuming tremendous importance. The mining engineer must rapidly expand his knowledge and his influence into these newer fields.” Mining techniques can be divided into two common excavation types: surface mining and sub-surface (underground) mining . Today, surface mining

4272-487: The form of water mills was extensive. The water mills were employed in crushing ore, raising ore from shafts, and ventilating galleries by powering giant bellows . Black powder was first used in mining in Selmecbánya , Kingdom of Hungary (now Banská Štiavnica , Slovakia) in 1627. Black powder allowed blasting of rock and earth to loosen and reveal ore veins. Blasting was much faster than fire-setting and allowed

4361-400: The growing importance of sustainable metal extraction practices. The process of mining from discovery of an ore body through extraction of minerals and finally to returning the land to its natural state consists of several distinct steps. The first is discovery of the ore body, which is carried out through prospecting or exploration to find and then define the extent, location and value of

4450-502: The host rock. They are: Local ground support is used to prevent smaller rocks from falling from the back and ribs. Not all excavations require local ground support. Using this method, mining is planned to extract rock from the stopes without filling the voids; this allows the wall rocks to cave in to the extracted stope after all the ore has been removed. The stope is then sealed to prevent access. Where large bulk ore bodies are to be mined at great depth, or where leaving pillars of ore

4539-421: The land after the mine is closed. Mining materials are often obtained from ore bodies, lodes , veins , seams , reefs , or placer deposits . The exploitation of these deposits for raw materials is dependent on investment, labor, energy, refining, and transportation cost. Mining operations can create a negative environmental impact, both during the mining activity and after the mine has closed. Hence, most of

SECTION 50

#1732765232744

4628-407: The level into the ore. There are two principal phases of underground mining: development mining and production mining. Development mining is composed of excavation almost entirely in (non-valuable) waste rock in order to gain access to the orebody. There are six steps in development mining: remove previously blasted material (muck out round), scaling (removing any unstable slabs of rock hanging from

4717-453: The location and regulations governing the site, it may be necessary to obtain permits and permissions before commencing drilling activities. This involves understanding and complying with local regulations, environmental guidelines, and any specific requirements for drilling in certain areas. Safety is paramount in any drilling operation. During the planning stage, safety protocols and measures are established to protect personnel, equipment, and

4806-535: The metals due to the difficulties of transporting them, but the copper was eventually traded throughout the continent along major river routes. In the early colonial history of the Americas, "native gold and silver was quickly expropriated and sent back to Spain in fleets of gold- and silver-laden galleons", the gold and silver originating mostly from mines in Central and South America. Turquoise dated at 700 AD

4895-768: The mid-19th century, mining for minerals and precious metals, along with ranching , became a driving factor in the U.S. Westward Expansion to the Pacific coast. With the exploration of the West, mining camps sprang up and "expressed a distinctive spirit, an enduring legacy to the new nation"; Gold Rushers would experience the same problems as the Land Rushers of the transient West that preceded them. Aided by railroads, many people traveled West for work opportunities in mining. Western cities such as Denver and Sacramento originated as mining towns. When new areas were explored, it

4984-497: The mid-sixteenth century. On the continent, mineral deposits belonged to the crown, and this regalian right was stoutly maintained. But in England, royal mining rights were restricted to gold and silver (of which England had virtually no deposits) by a judicial decision of 1568 and a law in 1688. England had iron , zinc , copper , lead , and tin ores. Landlords who owned the base metals and coal under their estates then had

5073-432: The minehead, where the water was stored in large reservoirs and tanks. When a full tank was opened, the flood of water sluiced away the overburden to expose the bedrock underneath and any gold-bearing veins. The rock was then worked by fire-setting to heat the rock, which would be quenched with a stream of water. The resulting thermal shock cracked the rock, enabling it to be removed by further streams of water from

5162-431: The mining of previously impenetrable metals and ores. In 1762, one of the world's first mining academies was established in the same town there. The widespread adoption of agricultural innovations such as the iron plowshare , as well as the growing use of metal as a building material, was also a driving force in the tremendous growth of the iron industry during this period. Inventions like the arrastra were often used by

5251-481: The ore body is of a payable grade sufficient to support an underground mining operation, but the strip ratio has become too great to support open cast extraction methods. They are also often built and maintained as an emergency safety access from the underground workings and a means of moving large equipment to the workings. Levels are excavated horizontally off the decline or shaft to access the ore body. Stopes are then excavated perpendicular (or near perpendicular) to

5340-405: The ore body. This leads to a mathematical resource estimation to estimate the size and grade of the deposit. This estimation is used to conduct a pre-feasibility study to determine the theoretical economics of the ore deposit. This identifies, early on, whether further investment in estimation and engineering studies is warranted and identifies key risks and areas for further work. The next step

5429-462: The ore concentrates, engineering concerns, milling and infrastructure costs, finance and equity requirements, and an analysis of the proposed mine from the initial excavation all the way through to reclamation. The proportion of a deposit that is economically recoverable is dependent on the enrichment factor of the ore in the area. To gain access to the mineral deposit within an area it is often necessary to mine through or remove waste material which

SECTION 60

#1732765232744

5518-410: The ore is removed from the bottom excavation. One of the most important aspects of underground hard rock mining is ventilation . Ventilation is the primary method of clearing hazardous gases and/or dust which are created from drilling and blasting activity (e.g., silica dust, NOx), diesel equipment (e.g., diesel particulate, carbon monoxide), or to protect against gases that are naturally emanating from

5607-410: The ore is removed. Orebodies that do not cave readily are sometimes preconditioned by hydraulic fracturing , blasting, or by a combination of both. Hydraulic fracturing has been applied to preconditioning strong roof rock over coal longwall panels, and to inducing caving in both coal and hard rock mines. In mines which use rubber-tired equipment for coarse ore removal, the ore (or "muck")

5696-442: The ore, lower wages, decreased occupational safety, benefits, and health standards for miners, and a lack of environmental protection measures. Artisanal miners often undertake the activity of mining seasonally. For example, crops are planted in the rainy season , and mining is pursued in the dry season . However, they also frequently travel to mining areas and work year-round. There are four broad types of ASM: Surface mining

5785-570: The overhead tanks. The Roman miners used similar methods to work cassiterite deposits in Cornwall and lead ore in the Pennines . Sluicing methods were developed by the Romans in Spain in 25 AD to exploit large alluvial gold deposits, the largest site being at Las Medulas , where seven long aqueducts tapped local rivers and sluiced the deposits. The Romans also exploited the silver present in

5874-522: The project, the Brega Plant, was hit by a NATO air strike. At a press conference on 26 July, NATO claimed that rockets had been fired from within the plant area, and that military materiel, including multiple rocket launchers , was stored there according to intelligence findings, presenting two photos of an BM-21 MRL as sole evidence for the destruction of the factory. The evidence for a potential UN resolutions breach has been insufficient. During

5963-486: The project. The fossil aquifer from which this water is being supplied is the Nubian Sandstone Aquifer System. It accumulated during the last ice age and is not currently being replenished. If 2007 rates of retrieval are not increased, the water could last a thousand years. Other estimates indicate that the aquifer could be depleted of water in as soon as 60 to 100 years. Analysts say that

6052-431: The remaining part of a coal seam previously exploited by other surface-mining techniques has too much overburden to be removed but can still be profitably exploited from the side of the artificial cliff made by previous mining. A typical cycle alternates sumping, which undercuts the seam, and shearing, which raises and lowers the cutter-head boom to cut the entire height of the coal seam. As the coal recovery cycle continues,

6141-643: The rock (e.g., radon gas). Ventilation is also used to manage underground temperatures for the workers. In deep, hot mines ventilation is used to cool the workplace; however, in very cold locations the air is heated to just above freezing before it enters the mine. Ventilation raises are typically used to transfer ventilation from surface to the workplaces, and can be modified for use as emergency escape routes. The primary sources of heat in underground hard rock mines are virgin rock temperature, machinery, auto compression, and fissure water. Other small contributing factors are human body heat and blasting. Some means of support

6230-499: The roof and sidewalls to protect workers and equipment from damage), installing support or/and reinforcement using shotcrete etceteras, drill face rock, load explosives, and blast explosives. To start the mining, the first step is to make the path to go down. The path is defined as 'Decline' as describe above. Before the start of a decline, all pre-planning of the power facility, drilling arrangement, de-watering, ventilation and, muck withdrawal facilities are required. Production mining

6319-409: The same techniques used to excavate ores of gems , such as diamonds and rubies . Soft-rock mining refers to the excavation of softer minerals, such as salt , coal , and oil sands . Accessing underground ore can be achieved via a decline (ramp), inclined vertical shaft or adit . Planning and preparation are crucial initial steps in the core drilling process. This stage involves conducting

6408-446: The shafts could no longer be pumped dry with the available technology. Although an increased use of banknotes , credit and copper coins during this period did decrease the value of, and dependence on, precious metals , gold and silver still remained vital to the story of medieval mining. Due to differences in the social structure of society, the increasing extraction of mineral deposits spread from central Europe to England in

6497-567: The silver mines of Laurium , which helped support the Greek city state of Athens . Although they had over 20,000 slaves working them, their technology was essentially identical to their Bronze Age predecessors. At other mines, such as on the island of Thassos , marble was quarried by the Parians after they arrived in the 7th century BC. The marble was shipped away and was later found by archaeologists to have been used in buildings including

6586-474: The surface through the tunnels and shafts. Sub-surface mining can be classified by the type of access shafts used, and the extraction method or the technique used to reach the mineral deposit. Drift mining uses horizontal access tunnels, slope mining uses diagonally sloping access shafts, and shaft mining uses vertical access shafts. Mining in hard and soft rock formations requires different techniques. Other methods include shrinkage stope mining , which

6675-595: The surrounding environment. This includes assessing potential hazards, developing emergency response plans, and ensuring the availability of necessary safety equipment. Planning also involves determining the equipment and resources required for the core drilling operation. This includes selecting the appropriate drilling rig, drill bits, and accessories based on factors such as the material being drilled, desired core diameter, and drilling depth. Adequate resources such as water supply, drilling mud, and coolants are also considered to ensure smooth drilling operations. Establishing

6764-602: The tomb of Amphipolis. Philip II of Macedon , the father of Alexander the Great , captured the gold mines of Mount Pangeo in 357 BC to fund his military campaigns. He also captured gold mines in Thrace for minting coinage, eventually producing 26 tons per year. However, it was the Romans who developed large-scale mining methods, especially the use of large volumes of water brought to the minehead by numerous aqueducts . The water

6853-448: The top of a mountain off to reach ore deposits at depth. Most placer deposits, because they are shallowly buried, are mined by surface methods. Finally, landfill mining involves sites where landfills are excavated and processed. Landfill mining has been thought of as a long-term solution to methane emissions and local pollution. High wall mining, which evolved from auger mining, is another form of surface mining. In high wall mining,

6942-628: The top slats. Many examples of such devices have been found in old Roman mines and some examples are now preserved in the British Museum and the National Museum of Wales . Mining as an industry underwent dramatic changes in medieval Europe . The mining industry in the early Middle Ages was mainly focused on the extraction of copper and iron . Other precious metals were also used, mainly for gilding or coinage. Initially, many metals were obtained through open-pit mining , and ore

7031-469: The world's gold, followed by the establishment of large mines such as the Mount Morgan Mine , which ran for nearly a hundred years, Broken Hill ore deposit (one of the largest zinc-lead ore deposits), and the iron ore mines at Iron Knob . After declines in production, another boom in mining occurred in the 1960s. In the early 21st century, Australia remains a major world mineral producer. As

7120-652: The world's nations have passed regulations to decrease the impact; however, the outsized role of mining in generating business for often rural, remote or economically depressed communities means that governments often fail to fully enforce such regulations. Work safety has long been a concern as well, and where enforced, modern practices have significantly improved safety in mines. Unregulated, poorly regulated or illegal mining , especially in developing economies , frequently contributes to local human rights violations and environmental conflicts . Mining can also perpetuate political instability through resource conflicts . Since

7209-474: The world, which was increasingly demanding copper for electrical and household goods. Canada's mining industry grew more slowly than did the United States due to limitations in transportation, capital, and U.S. competition; Ontario was the major producer of the early 20th century with nickel, copper, and gold. Meanwhile, Australia experienced the Australian gold rushes and by the 1850s was producing 40% of

7298-747: Was inaugurated on 1 September 1996. The project is owned by the Great Man-Made River Project Authority and was funded by the Gaddafi government . The primary contractor for the first phases was Dong Ah Consortium (a South Korean company) and the present main contractor is Al Nahr Company Ltd. Imported goods which were destined for use in the construction of the GMR were made in Korea and Europe (mainly in Italy) and arrived by sea via

7387-628: Was mined in pre-Columbian America; in the Cerillos Mining District in New Mexico , an estimate of "about 15,000 tons of rock had been removed from Mt. Chalchihuitl using stone tools before 1700." In 1727 Louis Denys (Denis) (1675–1741), sieur de La Ronde – brother of Simon-Pierre Denys de Bonaventure and the son-in-law of René Chartier – took command of Fort La Pointe at Chequamegon Bay ; where natives informed him of an island of copper. La Ronde obtained permission from

7476-576: Was primarily extracted from shallow depths, rather than through deep mine shafts. Around the 14th century , the growing use of weapons , armour , stirrups , and horseshoes greatly increased the demand for iron. Medieval knights , for example, were often laden with up to 100 pounds (45 kg) of plate or chain link armour in addition to swords , lances and other weapons. The overwhelming dependency on iron for military purposes spurred iron production and extraction processes. The silver crisis of 1465 occurred when all mines had reached depths at which

7565-406: Was still present near the surface in colonial times. Indigenous peoples used Lake Superior copper from at least 5,000 years ago; copper tools, arrowheads, and other artifacts that were part of an extensive native trade-network have been discovered. In addition, obsidian , flint , and other minerals were mined, worked, and traded. Early French explorers who encountered the sites made no use of

7654-411: Was the removal of water from mining shafts. As miners dug deeper to access new veins, flooding became a very real obstacle. The mining industry became dramatically more efficient and prosperous with the invention of mechanically- and animal-driven pumps. Iron metallurgy in Africa dates back over four thousand years. Gold became an important commodity for Africa during the trans-Saharan gold trade from

7743-403: Was used for a variety of purposes, including removing overburden and rock debris, called hydraulic mining , as well as washing comminuted , or crushed, ores and driving simple machinery. The Romans used hydraulic mining methods on a large scale to prospect for the veins of ore, especially using a now-obsolete form of mining known as hushing . They built numerous aqueducts to supply water to

7832-465: Was used. At other parts of the site, they penetrated the water table and dewatered the mines using several kinds of machines, especially reverse overshot water-wheels . These were used extensively in the copper mines at Rio Tinto in Spain, where one sequence comprised 16 such wheels arranged in pairs, and lifting water about 24 metres (79 ft). They were worked as treadmills with miners standing on

7921-539: Was usually the gold ( placer and then lode ) and then silver that were taken into possession and extracted first. Other metals would often wait for railroads or canals, as coarse gold dust and nuggets do not require smelting and are easy to identify and transport. In the early 20th century, the gold and silver rush to the western United States also stimulated mining for coal as well as base metals such as copper, lead, and iron. Areas in modern Montana, Utah, Arizona, and later Alaska became predominant suppliers of copper to

#743256