Misplaced Pages

#905094

94-566: The ERA Mini Turbo is a modified Mini city car that was produced by Engineering Research & Application Ltd. under the ERA brand name from 1989 to 1991 at Dunstable in Bedfordshire, England. The fastest-ever version of the original Mini to be sold through official dealers, it has been described as "the spiritual successor to the Cooper and the 1275 GT". To create the car, ERA installed

188-718: A turbocharged Austin Rover A-Series 1300 MG Metro engine, which produces 94 bhp (70 kW) at 6200 rpm and gave the car a claimed top speed of 115 mph (185 km/h), in a standard Mini and modified the body, suspension, brakes, water and oil cooling systems, and interior. The body kit was styled by Dennis Adams, who also designed the Marcos sports cars and the Probe 16 (the car used in 'A Clockwork Orange'). The car, which uses mostly Austin Rover components,

282-408: A 70% increase). Ten-inch (254 mm) wheels were specified, so new tyres had to be developed, the initial contract going to Dunlop . Issigonis went to Dunlop stating that he wanted even smaller, 8 in (203 mm) wheels (even though he had already settled on 10-inch). An agreement was made on the 10-inch size, after Dunlop rejected the eight-inch proposition. Many features were designed into

376-527: A catalytic converter and produce 45 kW (60 hp; 61 PS) at 5500 rpm. Power crept up to 46 kW (62 hp; 63 PS) at 5700 rpm for the fuel injected model. An internal bonnet release was fitted from 1992. By 1991, the Cooper represented forty percent of Mini sales in the home market; the main export market was Japan. Production ended in August 1996 as the Mark VII replaced it. In

470-453: A front rubber-mounted subframe with single tower bolts and the rear frame had some larger bushings introduced, all intended to improve the car's mechanical refinement and to reduce noise levels. Twin column stalks for indicators and wipers were introduced, as were larger foot pedals. From 1977 onwards, the rear light clusters included reversing lights. In July 1979 the lower end of the Mini range

564-415: A half years earlier, meaning the Mini outlived the car that was supposed to replace it. Lambretta The name is derived from the word Lambrate , the suburb of Milan named after the river Lambro which flows through the area, and where the factory was located. Lambretta was the name of a mythical water-sprite associated with the river which runs adjacent to the former production site. In 1972,

658-521: A hatchback. The Metro was therefore in essence, the Mini mechanicals repackaged into a larger hatchback bodyshell. Although the Mini continued to be produced after the Metro's launch, production volumes were reduced as British Leyland and its successor Rover Group concentrated on the Metro as its key supermini. The original Mini's last year in the top ten of the UK's top selling cars was 1981, as it came ninth and

752-698: A lower quality than the SIL-produced models and sometimes incorporated significant styling changes. SIL production seems to have peaked during the financial year 1980–81, with around 35,000 scooters being built. However, by 1987 this had dropped to around 4,500 units with production finally ceasing in 1997. After that SIL's production centred on the Lambro/ Vikram three-wheeler, powered by the Lambretta 2-stroke engine but also versions with diesel and electric power. SIL still produced limited spares for

846-522: A marque in its own right. The Morris version was known to all as "the Mini" or the "Morris Mini-Minor". This seems to have been a play on words: the Morris Minor was a larger, well known, and successful car that continued in production, and minor is Latin for "lesser", so an abbreviation of the Latin word for "least" – minimus  – was used for the new even smaller car. One name proposed for

940-478: A more rigid tubular frame, although the Cento (produced 1964–1965) & "J" range models (produced 1964–1970) did have a monocoque body. Early versions were available in "closed", with fully covered mechanicals or "open", with minimal panels and thus looking like an unusual motorcycle. The model A and model B were only available in "open" style. The D models were noted for their torsion-bar rear suspension; at its peak,

1034-499: A rectangular centre from the Innocenti Mini hatchback. The 1100 Special and 850 City models were phased out by 1980, and during the same year the engine was upgraded to the improved A-Plus unit from the new Metro in 998cc form, which was now the only engine available in the Mini. This was then followed by a number of incremental developments. In 1978, the Mini was one of the key cars made available to disabled motorists under

SECTION 10

#1732794009906

1128-420: A standard model with the same name. However this was the first time a UK-market 'round-nose' (i.e. non-Clubman) Mini had been available with the 1098cc engine, and the UK limited edition was also fitted with unique Exacton alloy wheels – the first time these were fitted to a factory-produced Mini – and plastic wheelarch extensions. Inside was the 1275GT's three-dial instrument cluster and a leather-rimmed wheel with

1222-647: A state-run enterprise based in Lucknow , Uttar Pradesh , bought the entire Lambretta manufacturing and trademark rights. Former Innocenti employees were used to set up an Indian factory as all the manuals and machinery instructions were in Italian. The first scooter built was the Lambretta 150dl. This was later rebadged as the Vijay Delux/DL for the homemarket, but remained badged the Lambretta150dl or

1316-486: A total of around 100 Lambretta models – at least one from each year between October 1947 through May 1971, plus later models from Spanish and Indian factories. It also houses a large amount of Lambretta memorabilia. This museum and collection was sold in early 2007 and re-opened on 8 August 2008 following refurbishment. In 1997 the UK-based Lambretta Clothing brand of clothing and accessories

1410-458: A very small economy car. His initial work was on the largest car, designated XC9001, with the smallest car, XC9003, having the lowest priority despite it being Issigonis' greatest personal interest. With Lord's dictum to produce a bubble car competitor and his revised design requirements being laid down in October 1956, work on XC9001 stopped and XC9003 became the priority. In addition to Issigonis,

1504-537: Is the owner of the international trademark Lambretta and has licensed the brand throughout the world. There is however no direct connection to the original Innocenti manufacturing company nor the original Lambretta scooters, other than use of the brand names. In 1922, Ferdinando Innocenti of Pescia built a steel-tubing factory in Rome. In 1931, he took the business to Milan where he built a larger factory producing seamless steel tubing and employing about 6,000. The factory

1598-672: The Authi company from 1968 onwards, mostly under the Morris name. In 1969, a fibreglass version of the Mini Mark II was developed for British Leyland's Chilean subsidiary (British Leyland Automotores de Chile, S.A., originally the independent assembler EMSSA). The bodyshell mould was created by the Peel Engineering Company . Production began in 1970 and continued for a few years; these fibreglass Minis can be recognised by

1692-674: The Dolomites (a section of the Alps ) and the Austrian border areas. Aeronautical engineer General Corradino D'Ascanio , responsible for the design and construction of the first modern helicopter by Agusta , was given the job by Ferdinando Innocenti of designing a simple, robust and affordable vehicle. It had to be easy to drive for both men and women, be able to carry a passenger and not get its driver's clothes soiled. D'Ascanio, who hated motorbikes, introduced many changes to his vehicle. It

1786-577: The Innocenti Mini under licence from BLMC. Innocenti was eventually sold to BLMC. Unfortunately, lack of foresight had caused BLMC to join a fashion trend that was ending rapidly. Long industrial strikes in BLMC ensued; motor-scooter sales declined sharply, and Innocenti finally closed shop in 1972. Scooter sales in many of Lambretta's export markets, such as India and Indonesia dropped precipitously as light Japanese motorcycles replaced scooters. In

1880-449: The Mini name . Retrospectively, the car is known as the "Classic Mini" to distinguish it from the modern, BMW-influenced MINI family of vehicles produced since 2000. The Mini came about because of a fuel shortage caused by the 1956 Suez Crisis . Petrol was once again rationed in the UK, sales of large cars slumped, and the market for German bubble cars boomed, even in countries such as

1974-466: The 10-foot (3.0 m) length; and the engine, for reasons of cost, should be an existing unit. Alec Issigonis , who had been working for Alvis , had been recruited back to BMC in 1955 with a brief from Lord to design a range of technically advanced family cars in the same innovative spirit as his earlier Morris Minor to complement BMC's existing conventional models. Issigonis had set out design projects for three cars – large and small family cars and

SECTION 20

#1732794009906

2068-507: The 1970s. These three models came with a front disc brake made by Campagnolo . The TV was the world's first production two-wheeled vehicle with a front disc brake. As the race to be the first person on the moon gathered pace, Innocenti's new model was launched, the Luna range (Luna meaning "moon", in Italian). The machines looked very advanced for their day, reverting to the open frame style of

2162-471: The ADO15's interior to maximise its passenger and luggage space on top of the major savings allowed by the transverse engine and 10-inch wheels. Sliding windows allowed single-skin doors to be fitted, improving elbow room and reducing costs. A bracing bar was fitted across the door frame to brace the single skin and this was later adapted into a large storage bin on each door. Issigonis later said that he had sized

2256-749: The Austin Partner (until 1964) and Morris Mascot (until 1981). It was introduced in Australia as Morris 850 only (not "Austin"), and then later as Morris Cooper and Morris Cooper S versions, as well. The Morris name Mini (Mini-Minor) was first used for Austin's version by BMC in 1961 when the Austin Seven was rebranded as the Austin Mini, somewhat to the surprise of the Sharp's Commercials car company (later known as Bond Cars), who had been using

2350-562: The BMC must have been losing around £30 per car, so decided to produce a larger car – the Cortina , launched in 1962 – as its competitor in the budget market. BMC insisted that the way company overheads were shared out, the Mini always made money. Larger profits came from the popular De Luxe models and from optional extras such as seat belts, door mirrors, a heater, and a radio, which would be considered necessities on modern cars, as well as

2444-578: The Brazil's main dictionaries, as a noun/substantive. The small village of Rodano , near Milan, hosts the biggest Lambretta museum in Europe and the Innocenti archives. In the collection are also several non-Lambretta scooters, including some first models from the 1910s and US Army scooters parachuted over Normandy in 1944. In Weston-super-Mare , England, there is a Lambretta Scooter Museum which houses

2538-669: The Casalini Sulky was sold as the Willam Bretta in France, beginning in 1980. As wealth increased in western Europe in the late 1960s, the demand for motor scooters fell as the small car became affordable to more people and Lambretta sales started to decline, as did the financial status of parent company Innocenti. The British Leyland Motor Corporation took advantage of Innocenti's production and engineering expertise and in 1961 had contracted Innocenti to produce cars such as

2632-517: The City was the new 850 SDL (Super Deluxe), which had the same specification as the standard Mini 1000 but with the smaller engine. For August 1979 the Mini's 20th anniversary was marked by the introduction of the first true limited-edition Mini, which was the Mini 1100 Special. This was a 5,000-car run with the 1098cc engine, broadly to the specification already in production for the European market as

2726-521: The Clubman). The most obvious changes were larger doors with concealed hinges. Customer demand led to the sliding windows being replaced with winding windows, although all Australian-manufactured Mark I Minis had adopted this feature in 1965 (with opening quarterlight windows). The suspension reverted from hydrolastic to rubber cones as a cost-saving measure. (The 1275 GT and Clubman retained the hydrolastic system until June 1971, when they, too, switched to

2820-511: The D model outsold all other two-wheeled vehicles combined. (For the latter, see Ruth Orkin's famous photograph American Girl in Italy .) The much greater success of the "closed" version confirmed that riders wanted protection from the weather and a clean-looking machine. Along with the Vespa , Lambretta was an iconic vehicle of the 1950s and 1960s when they became the adopted vehicle of choice for

2914-603: The GP/DL range of scooters, albeit sporadically. The SIL factory finally closed in 2022. As of 2010, The Lambretta Consortium has filed a suite against SIL (Scooters India Limited) for nonusage of the Lambretta Brand, seeking to claim the Lambretta brand name. There are still clubs across the world, both national and local clubs, devoted to the Lambretta scooter. The clubs still participate and organize ride outs and rallies which regularly take place during weekends over

ERA Mini Turbo - Misplaced Pages Continue

3008-1037: The Indian government bought the machinery of the Milanese factory, creating Scooters India Limited ( SIL ) in order to produce Lambretta scooters and also Lambro three-wheelers, the latter under the name Vikram for the domestic market. Lambretta scooters were also manufactured under licence by Fenwick in France, NSU in Germany, Serveta in Spain, API in India, Yulon in Taiwan, Pasco in Brazil, Auteco in Colombia and Siambretta in Argentina. Innocenti S.A. (also known as Lambretta Consortium ) based in Lugano, Switzerland

3102-641: The Lambretta GP150 in export markets. The homemarket model was later enhanced to become the Vijay Super. Further improvements were made in the final years of production by incorporating a 12v electronic ignition with contemporary Japanese style CDI unit and an advanced front suspension. SIL also distributed complete knock downs that were assembled in different parts of India and sold as the Allwyn Pusphak , Falcon, and Kesari. These were of

3196-755: The Lambretta Li125 and sold it via their catalog under the Riverside captive import brand. The French importer of Lambretta, one Henri Willame, also started a company selling imported microcars under the catch-all "Willam" label. Many of these creations received Lambretta engines, and were sold through the French Lambretta network. Certain minicars, such as the 123 cc "Lambretta Lisa" (built by DECSA in San Marino ) were sold primarily with "Lambretta" badging. The four-wheeled version of

3290-484: The Lambretta name until about 1976 and later on changed the name to Lamby for legal reasons. They also for sometime made and sold Lambretta TV 175 series under the name of Mac 175. Scooter India Ltd acquired the entire Innocenti Unit in 1972. API also built the trademark model [API-175] three-wheeler which was based on Innocenti's Lambro. API continued to build Lambretta-derived models until the 1990s but have been non-operational since 1993. In 1972, Scooters India Ltd. (SIL)

3384-539: The Metro was fifth. The arrival of the Metro also had production of the larger Allegro pruned back before it was finally discontinued in 1982. In 1982, BL made 56,297 Minis and over 175,000 Metros. Due to their common powertrain package, the Mini received many mechanical upgrades in the early 1980s which were shared with the Metro, such as the A-Plus engine , 12-inch wheels with front disc brakes, improved soundproofing and quieter, stronger transmissions. This not only modernised

3478-685: The Mini was produced by Innocenti in Milan and it was sold under the "Innocenti Mini" marque. Innocenti was also producing Lambretta scooters at that time. The Mini Mark I had three major UK updates: the Mark II, the Clubman, and the Mark III. Within these was a series of variations, including an estate car , a pick-up , a van, and the Mini Moke , a jeep -like buggy. The performance versions,

3572-683: The Mini Cooper and Cooper "S", were successful as both race and rally cars , winning the Monte Carlo Rally in 1964, 1965, and 1967. In 1966, the first-placed Mini (along with nine other cars) was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. In August 1959, the Mini was marketed under the Austin and Morris names, as the Austin Seven and Morris Mini-Minor. The Austin Seven

3666-423: The Mini but, because many of its major subassemblies were now shared with the Metro, made it very cost-effective to produce despite falling sales volumes. All cars had 8.4-inch (210 mm) brake discs and plastic wheel arches (Mini Special arches), but retained the same Mark IV body shell shape. The Mini's 25th anniversary fell in 1984 and British Leyland produced a 'Mini 25' limited-edition model, both to mark

3760-612: The Mini continually popular as a first car for younger drivers, and Austin-Rover introduced a steady stream of limited editions with bright paint colours, body graphics, and trim to appeal to this market. The Mini was also becoming prized as a characterful and nostalgic car in its own right, and the London Collection of limited-edition models was more upmarket and luxurious and named after affluent or fashionable parts of London. These marketing strategies proved very successful; Mini production actually had modest increases through

3854-537: The Mini platform. Bertone also created a Mini Cooper equivalent, christened the Innocenti De Tomaso , that sported a 1275-cc engine similar to the MG Metro engine, but with an 11-stud head, a special inlet manifold, and used the "A" clutch instead of the "Verto" type. It also used homokinetic shafts instead of rubber couplings. The Mini was still popular in the UK, but appeared increasingly outdated in

ERA Mini Turbo - Misplaced Pages Continue

3948-543: The Mini was voted the second-most influential car of the 20th century , behind the Ford Model T , and ahead of the Citroën DS and Volkswagen Beetle . The front-wheel-drive, transverse-engine layout were used in many other "supermini" style car designs such as Honda N360 (1967), Nissan Cherry (1970), and Fiat 127 (1971). The layout was also adapted for larger subcompact designs. This distinctive two-door car

4042-663: The UK youth-culture known as Mods . The character Jimmy from the influential scooter movie Quadrophenia rode a Lambretta Li 150 Series 3. Of the 1960s models, the TV (Turismo Veloce) , the Special (125 and 150) , the SX (Special X) and the GP (Grand Prix) are generally considered the most desirable due to their increased performance and refined look; the "matte black" fittings on the GP model are said to have influenced European car designs throughout

4136-481: The United Kingdom, where imported cars were still a rarity. Leonard Lord , the head of BMC, reportedly detested these cars so much that he vowed to rid the streets of them and design a 'proper miniature car'. He laid down some basic design requirements – the car should be contained within a box that measured 10×4×4 feet (3.0×1.2×1.2 m); and the passenger accommodation should occupy 6 feet (1.8 m) of

4230-654: The almost identical Austin version was Austin Newmarket, but it was sold as the Austin Seven (sometimes written as SE7EN in early publicity material – with the '7' using the letter V rotated anticlockwise so it approximated the number 7), which recalled the popular small Austin 7 of the 1920s and 1930s. Until 1962, the cars appeared in North America and France as the Austin 850 and Morris 850, and in Denmark as

4324-419: The bins to carry the ingredients of his favourite drink, a dry martini in the correct proportions (one bottle of vermouth and 2 of Gordon's Gin ). Similar bins were provided outboard of the rear seats, also serving a dual function of bracing the single-skin body panel. Small items could also be stowed under the rear seats, and early Minis were sold with optional wicker baskets specially shaped to slot under

4418-452: The cabin space, and required no maintenance. The conical shape gave the springs a progressive action, becoming stiffer at greater degrees of compression. This gave the ADO15 a smooth ride over small bumps, but minimised roll and pitch on more uneven surfaces. It also allowed the springs to cope with the huge variance in load between an unladen car (about 600 kg or 1300 lb) and a fully laden one (just over 1000 kg or 2240 lb, or

4512-465: The design and production of the Mini. The Mini shape had become so well known that by the 1990s, Rover Group  – the heirs to BMC – were able to register its design as a trademark in its own right. The production version of the Mini was demonstrated to the press in April 1959, and by August, several thousand cars had been produced ready for the first sales. The Mini was officially announced to

4606-407: The disadvantage of feeding the radiator with air that had been heated by passing over the engine. It also exposed the entire ignition system to the direct entry of rainwater through the grille. Early prototypes used the existing 948-cc A-Series unit, but this provided the ADO15 with performance far greater than its price and purpose required – a top speed of about 80 mph (129 km/h). The engine

4700-417: The drivetrain and suspension for the front and rear. This also simplified production, as both subframes could be built up independently and then mated to the already-completed bodyshell. It also opened up the possibility of easily producing variants on the ADO15 as a body of any shape or design could be used provided it could accommodate the subframes. In 1959, BMC and Alec Issigonis won the Dewar Trophy , for

4794-447: The early 2000s a number of modern plastic scooters originating in China and Taiwan started appearing on western markets with 'Lambretta' branding on them. These were nothing to do with Scooters India Ltd nor the original Lambretta scooters. As of 2017, The Lambretta Consortium has launched the "Lambretta V-Special" model. The Indian government bought the factory for essentially the same reasons that Ferdinando Innocenti had built it after

SECTION 50

#1732794009906

4888-429: The engine-oil lubricated, four-speed transmission in the sump , and by employing front-wheel drive . Drive was taken down to the transmission via a conventional clutch coupled to a set of primary gears on the end of the crankshaft which gave rise to the characteristic transmission "whine" for which the Mini became famous. Almost all small front-wheel drive cars developed since have used a similar configuration, except with

4982-423: The face of newer and more practical rivals. Since the late 1960s, plans had been in place for a newer and more practical supermini to replace it, though the Mini was still the only car of this size built by British Leyland for the home market. The Mark IV was introduced in 1976, though by this stage British Leyland was working on a new small car which was widely expected to replace the Mini before much longer. It had

5076-515: The front seat occupants . To further simplify construction, the hinges for the doors and boot lid were mounted externally. This also saved a small amount of cabin space. It also made the ADO15 very easy to assemble from complete knock-down kits in overseas markets with only basic industry. Cars could be assembled with minimal use of jigs as the external seams made the panels largely 'self-aligning'. They also allowed panels to be stacked flat on top of one other for easy shipping. As originally built, all

5170-448: The front, with modified drums at the rear. The car has adjustable shock absorbers all round, and the ride height is lowered. A total of 436 ERA Mini Turbos were produced. Mini The Mini (developed as ADO15 ) is a small, two-door, four-seat car produced by the British Motor Corporation (BMC) and its successors, from 1959 until 2000. Minus a brief hiatus, original Minis were built for four decades and sold during five, from

5264-462: The fuel cap or need for additional metal work on the smooth skin. Innocenti started production of Lambretta scooters in 1947, the year after Piaggio started production of its Vespa models. Lambrettas were manufactured under licence in Argentina, Brazil, Chile, Colombia, India and Spain, sometimes under other names, but always to a recognizable design, e.g. Siambretta in South America and Serveta in Spain. American retailer Montgomery Ward imported

5358-433: The last year of the 1950s into the last year of the 20th century, over a single generation, as fastbacks, estates, and convertibles. The original Mini is considered an icon of 1960s British popular culture . Its space-saving transverse engine and front-wheel drive layout – allowing 80% of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999,

5452-412: The layouts). Together, by July 1957, they had designed and built the original XC9003 prototype, which was affectionately named the "Orange Box" because of its colour. Leonard Lord approved the car for production on 19 July and XC9003 became project ADO15 . The ADO15 used a conventional BMC A-Series four-cylinder, water-cooled engine, but departed from tradition by mounting it transversely , with

5546-429: The market the following year, the 1947 Lambretta featured a rear pillion seat for a passenger or optionally a storage compartment. The original front protection "shield" was a flat piece of aero metal; later this developed into a twin skin to allow additional storage behind the front shield, similar to the glove compartment in a car. The fuel cap was underneath the hinged seat, which saved the cost of an additional lock on

5640-399: The mechanically interconnected Citroën 2CV suspension at that time (according to an interview by Moulton with Car Magazine in the late 1990s), which inspired the design of the hydrolastic suspension system for the Mini and Morris/Austin 1100, to try to keep the benefits of the 2CV system (ride comfort, body levelling, keeping the roadwheel under good control and the tyres in contact with

5734-498: The mid-1980s, from 34,974 Minis in 1984 to 35,280 in 1985 and 39,800 in 1986. In 1990, the Mini Cooper was relaunched - 20 years after the demise of the original model - which saw Mini production pass 40,000. Once again, it featured the long-running 1275-cc engine which had featured on the original Mini Cooper S. In 1988, Austin Rover decided to keep the Mini in production for as long as it was viable to do so, putting an end to reports that it would be discontinued by 1991, by which time

SECTION 60

#1732794009906

5828-412: The missing body seams and by larger panel gaps. The Chilean market was never very large and the Arica plant was closed in 1974. The reason for the fibreglass body was to enable Leyland to meet very strict requirements for local sourcing, increasing to 70.22% in 1971. The Mark III Mini had a modified bodyshell with enough alterations to see the factory code change from ADO15 to ADO20 (which it shared with

5922-586: The motorcycle world. To boost performance some owners have fitted aftermarket cylinders and crankshafts that increase the swept volume to as much as 333 cc. Common modifications include a Nikasil plated aluminium barrel with radical porting, large Dell'Orto or Mikuni carburettors and bespoke expansion chambers . Hydraulic disc brakes in the front are becoming common on the more highly tuned machines, as are hydraulic clutches and rear brakes. Modern low-profile tyres greatly improve handling, as do uprated front and rear suspension units. Sources : Den of

6016-836: The much admired "D" types, and although sales were slow to start with, racing success from grass-tracking to circuit-racing soon made them a sales success. Designed by Bertone Innocenti wanted a small frame and engine Lambretta that could be sold alongside the larger models. The frame had a tubular-steel front end, with bolt-on leg shields, and a monocoque pressed-steel rear frame. Lambrettas have attracted an eclectic following of "revival" Mods, collectors, scooterists , cutdown enthusiasts, and even racers. Lambrettas can be converted to fun and relatively fast machines with little (but relatively expensive) modification. Many owners customize these scooters with elaborate aftermarket products and paintwork and attend well-organised scooter rallies . The Lambretta has benefitted from advances in technology from

6110-414: The name Minicar for their three-wheeled vehicles since 1949. However, legal action was somehow averted, and BMC used the name "Mini" thereafter. In 1964, the suspension of the cars was replaced by another Moulton design, the hydrolastic system. The new suspension gave a softer ride, but it also increased weight and production cost. In 1971, the original rubber suspension reappeared and was retained for

6204-550: The new Motability scheme. Reports of the Mini's imminent demise surfaced again in 1980 with the launch of the Austin Mini-Metro (badging with the word "mini" in all lowercase). Faced with competition from a new wave of modern superminis like the Ford Fiesta , Renault 5 , and Volkswagen Polo , the Mini was beginning to fall out of favour in many export markets, with the South African, Australian, and New Zealand markets all stopping production around this time. Buyers of small cars now wanted modern and practical designs, usually with

6298-409: The occasion and to publicise the recent upgrades to the model. This marked the start of a turnaround in the Mini's fortunes. Basic models such as the City and the City E (using the economy-tuned drivetrain from the Metro HLE) filled in the bottom of the Austin-Rover range and still found buyers who wanted a compact city car that was easy to park and cheap to run. Low purchase and running costs also made

6392-530: The original Metro would also be replaced. With the larger Metro being redesigned in 1990 to take the new K-Series engine, the Mini became the sole recipient of the classic A-Series engine with transmission-in-sump layout. The engine mounting points were moved forward to take 1275-cc power units, and includes the later Horizontal Integral Float version of the SU carb , and also the single-point fuel-injection version, which came out in November 1991. The 998-cc power units were discontinued. Early, carburetted Coopers had

6486-460: The original shelf, internal bonnet release. Introduction of airbag on driver's side. The basic Mini was the 1.3i, the other model in the range being the Mini Cooper. The end of production in October 2000 not only signalled the end of original Mini production after 41 years, but also brought about the demise of the 1275-cc engine which had powered the Mini and numerous other BL/BMC/ARG cars for more than 35 years. The Metro had ceased production two and

6580-486: The public on 26 August 1959. Some 2,000 cars had already been sent abroad and were displayed that day in almost 100 countries. The key dimensions were: The first example, a Morris Mini-Minor with the registration 621 AOK, is on display at the Heritage Motor Centre in Warwickshire. Another early example from 1959 is on display at the National Motor Museum in Hampshire . The Mini was marketed under BMC's two main brand names, Austin and Morris, until 1969, when it became

6674-442: The remaining life of the Mini. From October 1965, the option of the unique Automotive Products designed four-speed automatic transmission became available. Cars fitted with this became the Mini-Matic. Slow at the outset, Mark I sales strengthened across most of the model lines in the 1960s, and production totalled 1,190,000. Ford purchased a Mini and dismantled it to see if they could offer an alternative. Ford determined that

6768-523: The road), but with added roll stiffness that the 2CV lacked. The short development time of the car meant this was not ready in time for the Mini's launch. The system intended for the Mini was further developed and the hydrolastic system was first used on the Morris 1100 , launched in 1962; the Mini gained the system later in 1964. As launched, the Mini had simpler suspension made from conical springs of solid rubber. These were compact, saving on intrusion into

6862-499: The rubber cone suspension of the original Minis. ) In 1969, the simple name Mini completely replaced the separate Austin and Morris brands. In April 1974, a heater became standard equipment on the entry-level Mini 850, as well, having by then already been included in the standard specification of the other models for some time. In the late 1970s, Innocenti introduced the Innocenti 90 and 120 , Bertone -designed hatchbacks based on

6956-404: The rubber cone system gave a raw and bumpy ride accentuated by the woven-webbing seats, but the rigidity of the rubber cones, together with the wheels' positioning at the corners of the car, gave the Mini go kart -like handling. Initially, an interconnected fluid system was planned, similar to the one that Alec Issigonis and Alex Moulton were working on in the mid-1950s at Alvis. They had assessed

7050-406: The seats. The fixed rear parcel shelf contributed to the rigidity of the body shell, although it did preclude fitting the ADO15 with a hatchback . The boot lid was hinged at the bottom so that the car could be driven with it open to increase luggage space. On early cars, the number plate , together with its light, was hinged at the top so that it could swing down to remain visible when the boot lid

7144-489: The spar-framed Vespa from 1946 on. The final design of the Lambretta was done by aeronautical engineers Cesare Pallavicino and Pier Luigi Torre . Pallavicino had been Technical Director at the Caproni airplane factory during World War II before working on the Lambretta design. Torre was an engine designer at Italo Balbo 's Idros; he designed the engine and organized Innocenti's factory for mass production. Arriving on

7238-477: The standard motorcycle chain, a source of oil and dirt. This basic design allowed a series of features to be deployed on the frame which would later allow quick development of new models. However, D'Ascanio fell out with Innocenti, who rather than a stamped spar frame wanted to produce his frame from rolled tubing, allowing him to revive both parts of his pre-war company. D'Ascanio disassociated himself from Innocenti and took his design to Enrico Piaggio who produced

7332-421: The structural body panels were welded to the top of the single floor pressing, but this caused major problems with water entering the cabin and was quickly changed in the first months of production. Early prototypes were fully unitary in construction, but the cars broke apart under the high loads from the large lever ratios used with the rubber cone suspension. The design was changed to use steel subframes to carry

7426-472: The summer months and have high attendance, some rallies achieve 2,500 paying rally goers. Across the UK there are many privately owned scooter shops which deal with everything Lambretta, from sales, services, parts, tuning, performance and complete nut and bolt restorations. In Portuguese, "lambreta" is used as a synonym for "scooter", being listed at the Novo Dicionário da Língua Portuguesa , one of

7520-572: The summer of 1991, 21 years after the fibreglass Mini built in Chile was produced, another fibreglass bodied Mini again entered production, this time in Venezuela. The producer, Facorca, intended to sell the car in the Caribbean and Central America, and also had plans for Brazilian assembly. This was the final version, twin point injection with front-mounted radiator. Full-width dashboard replaces

7614-461: The team that developed the Mini included John Sheppard (who had worked with Issigonis at Alvis), Jack Daniels (who had worked with Issigonis on the Morris Minor), Chris Kingham (also from Alvis), Charles Griffin (from Cowley), Vic Everton (from the body—jig shop), Ron Dovey (who built the bodies), Dick Gallimore (who laid out the experimental bodies), and George Cooper (whose job was to check

7708-408: The transmission separately enclosed rather than using the engine oil and mounted directly onto the end of the crankshaft, but with unequal length driveshafts. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so that it blew air into the natural low pressure area under the front wing. This location saved vehicle length, but had

7802-575: The various Cooper and Cooper S models. The Mini entered into popular culture in the 1960s with well-publicised purchases by film and music stars. The Cooper S version was also used by some British police forces as both a uniform and plainclothes car. The Mark II Mini was launched at the 1967 British Motor Show , and featured a redesigned grille, a larger rear window and numerous cosmetic changes. A total of 429,000 Mk II Minis were produced. A variety of Mini types were made in Pamplona , Spain, by

7896-472: The war. India was a country with poor infrastructure, economically not ready for small private cars yet with a demand for private transport. Automobile Products of India (API) began assembling Innocenti-built Lambretta scooters in India after independence in the 1950s beginning with 48 cc, Ld model, Li 1st series. They eventually acquired a licence to build the Li150 Series 2 model, which was sold under

7990-496: Was altered. The basic Mini 850 (which had featured in various forms since the original launch 20 years before) was withdrawn. Its place was taken by two models at slightly lower and slightly higher price points. The new base model was the Mini City, with black-painted bumpers, an untrimmed lower facia rail, part-fabric seats and wing mirror and sun visor only on the driver's side, plus unique 'City' body graphics and boot badge. Above

8084-404: Was better than many other economy cars of the time. The suspension system, designed by Issigonis's friend Alex Moulton at Moulton Developments Limited , used compact rubber cones instead of conventional springs. This space-saving design also featured rising progressive-rate springing of the cones, and provided some natural damping, in addition to the normal dampers. Built into the subframes,

8178-480: Was built on a spar frame with a handlebar gear change and the engine mounted directly onto the rear wheel. The front protection "shield" kept the rider dry and clean in comparison to the open front end on motorcycles. The pass-through leg area design was geared towards women, as wearing dresses or skirts made riding conventional motorcycles a challenge. The front fork, like an aircraft's landing gear, allowed for easy wheel changing. The internal mesh transmission eliminated

8272-762: Was designed for BMC by Sir Alec Issigonis . It was manufactured at the Longbridge plant in Birmingham, England located next to BMC's headquarters and at the former Morris Motors plant at Cowley near Oxford, in the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney , Australia, and later also in Spain ( Authi ), Belgium, Italy ( Innocenti ), Chile, Malta, Portugal, South Africa, Uruguay, Venezuela, and Yugoslavia ( IMV ). The Italian version of

8366-467: Was founded. The company is currently part of Lambretta Consortium. Lambrettas had three or four gears and two-stroke engines with capacities ranging from 49 cc to 198 cc. Most two-stroke engines require a mixture of oil with the gasoline in order to lubricate the piston and cylinder . Unlike the Vespa, which was built with a unibody chassis pressed from sheets of steel, Lambrettas featured

8460-608: Was heavily bombed and destroyed during World War II . The main stimulus for the design style of the Lambretta and Vespa dates back to pre-World War II Cushman scooters made in Nebraska , United States. These olive green scooters were in Italy in large numbers, ordered originally by the United States military as field transport for the paratroops and marines . The United States military had used them to get around German defence tactics of destroying roads and bridges in

8554-717: Was marketed through Austin Rover dealers. The interior has specially narrowed MG Metro front seats trimmed in Connolly Leather hide or a mix of grey tweed and leather, VDO instruments in an ERA-designed dash panel, pile carpeting, and a sunroof. Torque steer , common in a front-wheel drive layout, is mitigated by greater front-wheel toe-out and specially-made lower front suspension arms that provide 1.5 degrees of negative camber. The 6" x 13" aluminium alloy wheels are intended for either Goodyear or Dunlop 165/60HR13 low-profile tyres. The servo-assisted braking system has Metro ventilated discs and four-pot calipers at

8648-512: Was open. This feature was later discontinued after it was discovered that exhaust gases could leak into the cockpit when the boot was open. The Mini was designed as a monocoque shell with welded seams visible on the outside of the car running down the A and C pillars , and between the body and the floor pan. Those that ran from the base of the A-pillar to the wheel well were described as 'everted' (lit., 'turned outward') to provide more room for

8742-490: Was reduced to a new 848-cc capacity with a shorter stroke . This reduced power from 37 to 33 bhp and caused a significant drop in torque , so provided more realistic performance, especially when the ADO15 body was widened by 2 inches (5.08 cm) over the XC9003 prototype, which blunted the car's top speed while improving its stability and roadholding. Even so, the ADO15 had a top speed of 75 mph (121 km/h), which

8836-514: Was renamed Austin Mini in January 1962 and Mini became a marque in its own right in 1969. In 1980, it once again became the Austin Mini, and in 1988, just "Mini" (although the "Rover" badge was applied on some models exported to Japan). BMW acquired the Rover Group (formerly British Leyland ) in 1994, and sold the greater part of it in 2000, but retained the rights to build cars using

#905094