Misplaced Pages

#941058

66-619: Well-known designs that use versions of the O-235 included the Cessna 152 , Grumman American AA-1 series, Beechcraft Model 77 Skipper , Piper PA-38 Tomahawk , American Champion Citabria , Piper Clipper , and the Piper PA-22-108 Colt . The engines are all carburetor -equipped, feature dual magneto ignition and have a displacement of 233 cubic inches (3.82 L). The first O-235 model was certified on 11 February 1942. The O-235

132-490: A Lycoming O-235 engine which has been in production since 1942. The Lycoming provided not only an increase in engine power over the Cessna 150, but also was more compatible with the newer 100LL low-lead fuel. Cessna 152s produced between 1977 and 1982 were equipped with Lycoming O-235-L2C engines producing 110 hp (82 kW) at 2,550 rpm. This engine still suffered some lead-fouling problems in service. In 1983, it

198-411: A coordinated turn , adverse yaw is effectively compensated by the use of the rudder , which results in a sideforce on the vertical tail that opposes the adverse yaw by creating a favorable yawing moment. Another method of compensation is ' differential ailerons ', which have been rigged so that the down-going aileron deflects less than the up-going one. In this case the opposing yaw moment is generated by

264-472: A patent pool effectively putting an end to the Wright brothers patent war . The Wright company quietly changed its aircraft flight controls from wing warping to the use of ailerons at that time as well. Others who were previously thought to have been the first to introduce ailerons included: The Wright Brothers' Ohio patent attorney Henry Toulmin filed an expansive patent application and on May 22, 1906,

330-480: A Boulton-style pendulum controlled single-axis autopilot device. The pioneering U.S. aeronautical engineer Octave Chanute published descriptions and drawings of the Wright brothers ' 1902 glider in the leading aviation periodical of the day, L'Aérophile , in 1903. This prompted Esnault-Pelterie, a French military engineer, to build a Wright-style glider in 1904 that used ailerons in lieu of wing warping . The French journal L'Aérophile then published photos of

396-410: A difference in profile drag between the left and right wingtips. Frise ailerons accentuate this profile drag imbalance by protruding beneath the wing of an upward-deflected aileron, most often by being hinged slightly behind the leading edge and near the bottom of the surface, with the lower section of the aileron surface's leading edge protruding slightly below the wing's undersurface when the aileron

462-619: A former curator of the Smithsonian Air & Space Museum in Washington, D.C., and other researchers, due to the patent they had received the Wrights stood firmly on the position that all flying using lateral roll control, anywhere in the world, would only be conducted under license by them. The Wrights subsequently became embroiled with numerous lawsuits they launched against aircraft builders who used lateral flight controls, and

528-448: A legal resolution. A much earlier aileron concept was patented in 1868 by British scientist Matthew Piers Watt Boulton , based on his 1864 paper On Aërial Locomotion . The name "aileron", from French, meaning "little wing", also refers to the extremities of a bird's wings used to control their flight. It first appeared in print in the 7th edition of Cassell's French-English Dictionary of 1877, with its lead meaning of "small wing". In

594-411: A maximum of 30 degrees. The rudder can move 23 degrees to either side and is fitted with a ground-adjustable trim tab . The elevators move up through 25 degrees and down through 18 degrees. An adjustable trim tab is installed on the right elevator and is controlled by a small wheel in the center of the control console. The trim tab moves 10 degrees up and 20 degrees down relative to

660-479: A number of minor design changes and a slightly more powerful engine with a longer time between overhaul . The Cessna 152 has been out of production for almost forty years, but many are still airworthy and are in regular use for flight training. First delivered in 1977 as the 1978 model year, the 152 was a modernization of the proven Cessna 150 design. The 152 was intended to compete with the new Beechcraft Skipper and Piper Tomahawk , both of which were introduced

726-552: A stall. The 1978 model has a one piece cowling nose bowl that requires removing the propeller to remove it. The 1979 model introduced a split-nose cowling nose bowl that can be removed without removing the propeller. Dual controls are available as optional equipment on the Cessna 152 and almost all 152s have this option installed. The Cessna 152 is equipped with differential ailerons that move through 20 degrees upwards and 15 degrees downwards. It has single-slotted fowler flaps which are electrically operated and deploy to

SECTION 10

#1732779991942

792-444: Is a hinged flight control surface usually forming part of the trailing edge of each wing of a fixed-wing aircraft . Ailerons are used in pairs to control the aircraft in roll (or movement around the aircraft's longitudinal axis ), which normally results in a change in flight path due to the tilting of the lift vector . Movement around this axis is called 'rolling' or 'banking'. Considerable controversy exists over credit for

858-444: Is a semi- monocoque with vertical bulkheads and frames joined by longerons running the length of the fuselage . The wings are of a strut-braced design and have a 1 degree dihedral angle. The tapered (outboard) portion of each wing has one degree of washout (the chord of the tip section has one degree lower angle of attack than the chord at the end of the constant-width section). This allows greater aileron effectiveness during

924-507: Is applied by depressing both toe brakes and then pulling the "Park Brake" lever to the pilot's left. The toe brakes are then released but pressure is maintained in the system thereby leaving both brakes engaged. The standard tires used are 600 X 6 on the main gear and 500 X 5 on the nosewheel. There are hundreds of modifications available for the Cessna 152. The most frequently installed include: Taildragger conversions are available and have been fitted to some 152s. It involves strengthening

990-502: Is basically countered by aircraft yaw stability and also by the use of differential aileron movement. The Frise-type aileron also forms a slot, so air flows smoothly over the lowered aileron, making it more effective at high angles of attack. Frise-type ailerons may also be designed to function differentially. Like the differential aileron , the Frise-type aileron does not eliminate adverse yaw entirely. Coordinated rudder application

1056-411: Is caused partly by the change in drag between the left and right wing. The rising wing generates increased lift, which causes increased induced drag . The descending wing generates reduced lift, which causes reduced induced drag. Profile drag caused by the deflected ailerons may add further to the difference, along with changes in the lift vectors as one rotates back while the other rotates forward. In

1122-413: Is connected to the rudder pedals through a spring linkage. The braking system consists of single disc brake assemblies fitted to the main gear and operated by a hydraulic system. Brakes are operated by pushing on the top portion of the rudder pedals. It is possible to use differential braking when taxiing and this allows very tight turns to be made. The 152 is also fitted with a parking brake system. It

1188-431: Is deflected upwards, substantially increasing profile drag on that side. Ailerons may also be designed to use a combination of these methods. With ailerons in the neutral position, the wing on the outside of the turn develops more lift than the opposite wing due to the variation in airspeed across the wing span, which tends to cause the aircraft to continue to roll. Once the desired angle of bank (degree of rotation about

1254-402: Is moved downward, the other is moved upward: the down-going aileron increases the lift on its wing while the up-going aileron reduces the lift on its wing, producing a rolling (also called 'banking') moment about the aircraft's longitudinal axis (which extends from the nose to the tail of an airplane). Ailerons are usually situated near the wing tip , but may sometimes also be situated nearer

1320-424: Is one of the better-known of the latter. It involves fitting a more cambered leading edge cuff to increase the maximum coefficient of lift, fitting fences at the aileron/flap intersection and fitting drooped wingtips. Stalls with these modifications are almost off the airspeed indicator, since instrument error is high at high angles of attack. It has been said that landings can be achieved in two fuselage lengths with

1386-412: Is still needed when ailerons are applied. By careful design of the mechanical linkages, the up aileron can be made to deflect more than the down aileron (e.g., US patent 1,565,097). This helps reduce the likelihood of a wing tip stall when aileron deflections are made at high angles of attack. In addition, the consequent differential in drag reduces adverse yaw (as also discussed above ). The idea

SECTION 20

#1732779991942

1452-422: Is that the loss of lift associated with the up aileron carries no penalty while the increase in lift associated with the down aileron is minimized. The rolling couple on the aircraft is always the difference in lift between the two wings. A designer at de Havilland invented a simple and practical linkage and their de Havilland Tiger Moth classic British biplane became one of the best-known aircraft, and one of

1518-493: The Bristol Aeroplane Company developed an aileron shape that is pivoted at about its 25 to 30% chord line and near its bottom surface [1] , in order to decrease stick forces as aircraft became faster during the 1930s. When the aileron is deflected up (to make its wing go down), the leading edge of the aileron starts to protrude below the underside of the wing into the airflow beneath the wing. The moment of

1584-473: The fuselage is parallel to the flight path. A simple gauge on the instrument panel called the slip indicator , also known as "the ball", indicates when this coordination is achieved. Particularly on larger or faster aircraft, control forces may be extremely heavy. Borrowing a discovery from boats that extending a control surface's area forward of the hinge lightens the forces needed first appeared on ailerons during World War I when ailerons were extended beyond

1650-501: The later version of the Santos-Dumont Demoiselle , which only warped the wingtips "downward". One of the disadvantages of this setup was a greater tendency to yaw than even with basic interconnected ailerons. During the 1930s a number of light aircraft used single acting controls but used springs to return the ailerons to their neutral positions when the stick was released. Used on the first-ever airframe to have

1716-427: The wing root . Modern airliners may also have a second pair of ailerons on their wings, with the two positions distinguished by the terms 'outboard aileron' and 'inboard aileron'. An unwanted side effect of aileron operation is adverse yaw —a yawing moment in the opposite direction to the roll. Using the ailerons to roll an aircraft to the right produces a yawing motion to the left. As the aircraft rolls, adverse yaw

1782-603: The 1938 popular US Piper J-3 Cub monoplane possessed Frise ailerons as designed and helped introduce them to a wide audience. A claimed benefit of the Frise aileron is the ability to counteract adverse yaw. To do so, the leading edge of the aileron has to be sharp or bluntly rounded, which adds significant drag to the upturned aileron and helps counterbalance the yaw force created by the other aileron turned down. This can add some unpleasant, nonlinear effect and/or potentially dangerous aerodynamic vibration (flutter). Adverse yaw moment

1848-550: The Cessna 152/172 series can be roll controlled with rudder alone. The rudder of the Boeing 737 has more roll authority over the aircraft than the ailerons at high angles of attack. This led to two notable accidents when the rudder jammed in the fully deflected position causing rollovers (see Boeing 737 rudder issues ). Some aircraft such as the Fokker Spin and model gliders lack any type of lateral control. Those aircraft use

1914-641: The Junkers J 7 all-duralumin metal demonstrator monoplane using them—the J 7 led directly to the Junkers D.I all-duralumin metal German fighter design of 1918, which had conventionally hinged ailerons. The main problem with this type of aileron is the dangerous tendency to stall if used aggressively, especially if the aircraft is already in danger of stalling, hence the use primarily on prototypes, and their replacement on production aircraft with more conventional ailerons. Engineer Leslie George Frise (1897–1979) of

1980-781: The O-235-F series engine and therefore the engine recommended time between overhauls is reduced from 2,400 hours to 2,000 hours. Other popular modifications include: Cessna 152 has only 4 model variants: 152, F152, A152, FA152 (all equipped with the Lycoming O-235): The 152 is popular with flight training organizations and is also widely operated by private individuals. Data from Cessna 152 Pilot's Operating Handbook General characteristics Performance Related development Aircraft of comparable role, configuration, and era Related lists Aileron An aileron (French for "little wing" or "fin")

2046-545: The Wrights. There are still conflicting claims today over who first invented the aileron. Other 19th century engineers and scientists, including Charles Renard , Alphonse Pénaud , and Louis Mouillard , had described similar flight control surfaces. Another technique for lateral flight control, wing warping , was also described or experimented with by several people including Jean-Marie Le Bris , John Montgomery , Clement Ader , Edson Gallaudet , D.D. Wells, and Hugo Mattullath. Aviation historian C.H. Gibbs-Smith wrote that

Lycoming O-235 - Misplaced Pages Continue

2112-438: The advantage of not weakening the airplane's wing structure as did the wing warping technique, which was one reason for Esnault-Pelterie's decision to switch to ailerons. By 1911 most biplanes used ailerons rather than wing warping—by 1915 ailerons had become almost universal on monoplanes as well. The U.S. Government, frustrated by the lack of its country's aeronautical advances in the years leading up to World War I , enforced

2178-418: The aileron lower surface, ahead of the aileron hinge, by a lever arm. They reduce the force needed by the pilot to deflect the aileron and are often seen on aerobatic aircraft. As the aileron is deflected upward, the spade produces a downward aerodynamic force, which tends to rotate the whole assembly so as to further deflect the aileron upward. The size of the spade (and its lever arm) determines how much force

2244-558: The aileron was "....one of the most remarkable inventions... of aeronautical history, which was immediately lost sight of". In 1906 the Wright brothers obtained a patent not for the invention of an airplane (which had existed for a number of decades in the form of gliders) but for the invention of a system of aerodynamic control that manipulated a flying machine's surfaces, including lateral flight control, although rudders , elevators and ailerons had previously been invented. Pairs of ailerons are typically interconnected so that when one

2310-405: The aileron. In addition to reducing the risk of flutter, mass balances also reduce the stick forces required to move the control surface in maneuvers. Some aileron designs, particularly when fitted on swept wings, include fences like wing fences flush with their inboard plane, in order to suppress some of the spanwise component of the airflow running on the top of the wing, which tends to disrupt

2376-424: The aileron. In some aircraft the aileron construction may be too heavy to allow this system to work without an excessive increase in the weight of the aileron. In this case, the weight may be added to a lever arm to move the weight well out in front to the aileron body. These balance weights are tear drop shaped (to reduce drag), which make them appear quite different from spades, although both project forward and below

2442-629: The ailerons on Esnault-Pelterie's glider which were included in his June 1905 article, and its ailerons were widely copied afterward. The Wright brothers used wing warping instead of ailerons for roll control on their glider in 1902, and about 1904 their Flyer II was the only aircraft of its time able to do a coordinated banked turn. During the early years of powered flight the Wrights had better roll control on their designs than airplanes that used movable surfaces. From 1908, as aileron designs were refined it became clear that ailerons were much more effective and practical than wing warping. Ailerons also had

2508-531: The airflow over a wing, disrupt the airflow and reduce the amount of lift generated. Many modern aircraft designs, especially jet aircraft , use spoilers in lieu of, or to supplement ailerons, such as the F4 Phantom II and Northrop P-61 Black Widow , which had almost full width flaps (there were very small conventional ailerons at the wingtips as well). All aircraft with dihedral have some form of yaw-roll coupling to promote stability. Common trainers like

2574-513: The brothers were consequently blamed for playing "...a major role in the lack of growth and aviation industry competition in the United States comparative to other nations like Germany leading up to and during World War I". Years of protracted legal conflict ensued with many other aircraft builders until the U.S. entered World War I, when the government imposed a legislated agreement among the parties which resulted in royalty payments of 1% to

2640-416: The brothers were granted U.S. Patent 821393. The patent's importance lay in its claim of a new and useful method of controlling an airplane. The patent application included the claim for the lateral control of aircraft flight that was not limited to wing warping, but through any manipulation of the "....angular relations of the lateral margins of the airplanes [wings].... varied in opposite directions". Thus

2706-488: The cockpit so that different power settings or flight attitudes can be compensated for. Some large aircraft from the 1950s (including the Canadair Argus ) used free floating control surfaces that the pilot controlled only through the deflection of trim tabs, in which case additional tabs were also provided to fine-tune the control to provide straight and level flight. Spades are flat metal plates, usually attached to

Lycoming O-235 - Misplaced Pages Continue

2772-541: The combination of "joystick/rudder-bar" controls that directly led to the modern flight control system , the Blériot VIII in 1908, some designs of early aircraft used "wingtip" ailerons, where the entire wingtip was rotated to achieve roll control as a separate, pivoting roll-control surface—the AEA June Bug used a form of these, with both the experimental German Fokker V.1 of 1916 and the earlier versions of

2838-614: The context of powered airplanes it appears in print about 1908. Prior to that, ailerons were often referred to as rudders , their older technical sibling, with no distinction between their orientations and functions, or more descriptively as horizontal rudders (in French, gouvernails horizontaux ). Among the earliest printed aeronautical use of 'aileron' was that in the French aviation journal L'Aérophile of 1908. Ailerons had more or less completely supplanted other forms of lateral control, such as wing warping , by about 1915, well after

2904-509: The designation F152/FA152. Production of the 152 was ended in 1985 when Cessna ended production of all of their light aircraft; by that time, a total of 7,584 examples of the 152, including A152 and FA152 Aerobat aerobatic variants, had been built worldwide. In 2007 Cessna announced that it would build a light-sport successor, designated the Model 162 Skycatcher , although production ended in 2013. All Cessna 152s were manufactured with

2970-542: The earliest, to use differential ailerons. On the earliest Pioneer Era aircraft, such as the Wright Flyer and the later, 1909-origin Blériot XI and Etrich Taube , lateral control was effected by twisting the outboard portion of the wing so as to increase or decrease lift by changing the angle of attack. This had the disadvantages of stressing the structure, being heavy on the controls, and of risking stalling

3036-520: The elevator chordline. The Cessna 152 is equipped with fixed tricycle landing gear . The main gear has tubular steel legs surrounded by a full-length fairing with a step for access to the cabin. The main gear has a 7 ft 7 in (2.31 m) wheelbase. The nosewheel is connected to the engine mount and has an oleo strut to dampen and absorb normal operating loads. The nosewheel is steerable through 30 degrees either side of neutral and can castor under differential braking up to 30 degrees. It

3102-454: The function of the rudder and elevator flight controls had been largely standardised. Although there were previously many conflicting claims over who first invented the aileron and its function, i.e., lateral or roll control, the flight control device was invented and described by the British scientist and metaphysicist Matthew Piers Watt Boulton in his 1864 paper On Aërial Locomotion . He

3168-442: The fuselage for the main gear being moved further forward, removing the nosewheel and strengthening the tail area for the tailwheel. This greatly improves short field performance and is claimed to give up to a 10 kn (19 km/h) cruise speed increase. The wings can be modified using a number of STOL modification kits , some improving high speed/cruise performance but most concentrating on STOL performance. Horton's STOL kit

3234-522: The invention of the aileron. The Wright brothers and Glenn Curtiss fought a years-long legal battle over the Wright patent of 1906, which described a method of wing-warping to achieve lateral control. The brothers prevailed in several court decisions which found that Curtiss's use of ailerons violated the Wright patent. Ultimately, the First World War compelled the U.S. Government to legislate

3300-466: The kit installed in addition to a taildragger modification, by balancing power against drag. Takeoff performance is also improved by varying degrees depending on the surface. The engine's power can be increased by various modifications, such as the Sparrow Hawk power package, increasing it to 125 hp (93 kW). The disadvantage of the Sparrow Hawk conversion is that it uses pistons from

3366-632: The laminar flow above the aileron, when deflected downwards. Used during aviation's pre-war "pioneer era" and into the early years of the First World War, these ailerons were each controlled by a single cable, which pulled the aileron up. When the aircraft was at rest, the ailerons hung vertically down. This type of aileron was used on the Farman III biplane 1909 and the Short 166 . A "reverse" version of this, utilizing wing-warping, existed on

SECTION 50

#1732779991942

3432-462: The lateral control of flying machines. The fact that the Wright brothers were able to gain a patent in 1906 did not invalidate Boulton's lost and forgotten invention. Ailerons were not used on manned aircraft until they were employed on Robert Esnault-Pelterie 's glider in 1904, although in 1871 a French military engineer, Charles Renard , built and flew an unmanned glider incorporating ailerons on each side (which he termed 'winglets'), activated by

3498-512: The leading edge in the airflow helps to move up the trailing edge, which decreases the stick force. The down moving aileron also adds energy to the boundary layer. The edge of the aileron directs air flow from the underside of the wing to the upper surface of the aileron, thus creating a lifting force added to the lift of the wing. This reduces the needed deflection of the aileron. Both the Canadian Fleet Model 2 biplane of 1930 and

3564-401: The longitudinal axis) has been obtained, the pilot uses opposite aileron to prevent the angle of bank from increasing due to this variation in lift across the wing span. This minor opposite use of the control must be maintained throughout the turn. The pilot also uses a slight amount of rudder in the same direction as the turn to counteract adverse yaw and to produce a "coordinated" turn wherein

3630-481: The patent explicitly stated that other methods besides wing-warping could be used for adjusting the outer portions of an airplane's wings to different angles on its right and left sides to achieve lateral roll control. John J. Montgomery was granted U.S. Patent 831173 at nearly the same time for his methods of wing warping. Both the Wright Brothers patent and Montgomery's patent were reviewed and approved by

3696-404: The pilot needs to apply to deflect the aileron. A spade works in the same manner as a horn but is more efficient due to the longer moment arm . To increase the speed at which control surface flutter ( aeroelastic flutter ) might become a risk, the center of gravity of the control surface is moved towards the hinge-line for that surface. To achieve this, lead weights may be added to the front of

3762-410: The same benefit. Trim tabs are small movable sections resembling scaled down ailerons located at or near the trailing edge of the aileron. On most propeller powered aircraft, the rotation of the propeller(s) induces a counteracting roll movement due to Newton's third law of motion , in that every action has an equal and opposite reaction. To relieve the pilot of having to provide continuous pressure on

3828-566: The same patent examiner at the United States Patent Office, William Townsend. At the time Townsend indicated that both methods of wing warping were invented independently and were sufficiently different to each justify their own patent award. Multiple U.S. court decisions favoured the expansive Wright patent, which the Wright Brothers sought to enforce with licensing fees starting from $ 1,000 per airplane, and said to range up to $ 1,000 per day. According to Louis S. Casey,

3894-470: The same year. Additional design goals were to improve useful load through a gross weight increase to 1,670 lb (760 kg), decrease internal and external noise levels and run better on the then newly introduced Avgas fuel. As with the 150, the great majority of 152s were built at the Cessna factory in Wichita, Kansas . A number of aircraft were also built by Reims Aviation of France and given

3960-663: The side with the increased angle of attack during a maneuver. By 1916, most designers had abandoned wing warping in favor of ailerons. Researchers at NASA and elsewhere have been taking a second look at wing warping again, although under new names. The NASA version is the X-53 Active Aeroelastic Wing while the United States Air Force tested the Adaptive Compliant Wing . Spoilers are devices that when extended into

4026-441: The stick in one direction (which causes fatigue) trim tabs are provided to adjust or trim out the pressure needed against any unwanted movement. The tab itself is deflected in relation to the aileron, causing the aileron to move in the opposite direction. Trim tabs come in two forms, adjustable and fixed. A fixed trim tab is manually bent to the required amount of deflection, while the adjustable trim tab can be controlled from within

SECTION 60

#1732779991942

4092-473: The wingtip and provided with a horn ahead of the hinge. Known as overhung ailerons, possibly the best known examples are the Handley Page Type O (first flight 17 December 1915), Sopwith Snipe , Fokker Dr.I and Fokker D.VII . Later examples brought the counterbalance in line with the wing to improve control and reduce drag. This is seen less often now, due to the Frise type aileron which provides

4158-559: Was also endorsed by C.H. Gibbs-Smith. Boulton's British patent, No. 392 of 1868, issued about 35 years before ailerons were "reinvented" in France, became forgotten and lost from sight until after the flight control device was in general use. Gibbs-Smith stated on several occasions that if the Boulton patent had been revealed at the time of the Wright brothers ' legal filings, they might not have been able to claim priority of invention for

4224-435: Was developed into the lighter-weight Lycoming IO-233 engine for light sport aircraft . Data from Operator's Manual, Textron Lycoming Aircraft Engines. Comparable engines Related lists Cessna 152 The Cessna 152 is an American two-seat, fixed- tricycle-gear , general aviation airplane , used primarily for flight training and personal use. It was based on the earlier Cessna 150 incorporating

4290-424: Was succeeded by the 108 hp (81 kW) O-235-N2C which featured a different piston design and a redesigned combustion chamber to reduce this problem. The N2C engine was used until 152 production ended in 1985. The airframe is mainly of metal construction, being primarily of 2024-T3 aluminum alloy with riveted skin. Components such as wingtips and fairings are made from glass-reinforced plastic . The fuselage

4356-419: Was the first to patent an aileron control system in 1868. Boulton's description of his lateral flight control system was "the first record we have of appreciation of the necessity for active lateral control as distinguished from [passive lateral stability].... With this invention of Boulton's we have the birth of the present-day three torque method of airborne control" as was praised by Charles Manly . This

#941058