88-593: The M-Bahn or Magnetbahn was an elevated Maglev train line operating in Berlin , Germany , experimentally from 1984 and in passenger operation from 1989 to 1991. The line was 1.6 kilometres (1 mi) in length, and featured three stations, two of which were newly constructed. Presumed to be the future of rail transit in Berlin, the line was built to fill a gap in the West Berlin public transport network created by
176-556: A ball screw , timing belt , or rack and pinion , is that they provide any combination of high precision, high velocity, high force and long travel. Linear motors are widely used. One of the major uses of linear motors is for propelling the shuttle in looms . A linear motor has been used for sliding doors and various similar actuators. They have been used for baggage handling and even large-scale bulk materials transport. Linear motors are sometimes used to create rotary motion. For example, they have been used at observatories to deal with
264-500: A maglev train accident occurred in Lathen, killing 23 people. It was found to have been caused by human error in implementing safety checks. From 2006 no passengers were carried. At the end of 2011 the operation licence expired and was not renewed, and in early 2012 demolition permission was given for its facilities, including the track and factory. In March 2021 it was reported the CRRC
352-868: A 110 kilometres per hour (68 mph) operating speed. Two more stages are planned of 9.7 kilometres (6 mi) and 37.4 kilometres (23.2 mi). Once completed it will become a circular line. It was shut down in September 2023. Transport System Bögl (TSB) is a driverless maglev system developed by the German construction company Max Bögl since 2010. Its primary intended use is for short to medium distances (up to 30 km) and speeds up to 150 km/h for uses such as airport shuttles . The company has been doing test runs on an 820-meter-long test track at their headquarters in Sengenthal , Upper Palatinate , Germany , since 2012 clocking over 100,000 tests covering
440-541: A 30 percent increase in traction efficiency and a 60 percent increase in speed over the stock in use on the line since. The vehicles entered service in July 2021 with a top speed of 140 km/h (87 mph). CRRC Zhuzhou Locomotive said in April 2020 it is developing a model capable of 200 km/h (120 mph). There are two competing efforts for high-speed maglev systems, i.e., 300–620 km/h (190–390 mph). In
528-502: A 60-metre ramp which was later extended to 980 metres. From the late 1970s to the 1980s five prototypes of cars were built that received designations from TP-01 (ТП-01) to TP-05 (ТП-05). The early cars were supposed to reach the speed up to 100 kilometres per hour (62 mph). The construction of a maglev track using the technology from Ramenskoye started in Armenian SSR in 1987 and was planned to be completed in 1991. The track
616-471: A 90-foot test track in Johnson's basement "absolutely noiseless[ly] and without the least vibration." A series of German patents for magnetic levitation trains propelled by linear motors were awarded to Hermann Kemper between 1937 and 1941. An early maglev train was described in U.S. patent 3,158,765 , "Magnetic system of transportation", by G. R. Polgreen on 25 August 1959. The first use of "maglev" in
704-640: A 908 metres (2,979 ft) track was opened in Hamburg for the first International Transportation Exhibition (IVA 79). Interest was sufficient that operations were extended three months after the exhibition finished, having carried more than 50,000 passengers. It was reassembled in Kassel in 1980. In 1979 the USSR town of Ramenskoye ( Moscow oblast ) built an experimental test site for running experiments with cars on magnetic suspension. The test site consisted of
792-473: A German maglev company, had a test track in Emsland with a total length of 31.5 kilometres (19.6 mi). The single-track line ran between Dörpen and Lathen with turning loops at each end. The trains regularly ran at up to 420 kilometres per hour (260 mph). Paying passengers were carried as part of the testing process. The construction of the test facility began in 1980 and finished in 1984. In 2006,
880-472: A United States patent was in "Magnetic levitation guidance system" by Canadian Patents and Development Limited . In 1912 French-American inventor Émile Bachelet demonstrated a model train with electromagnetic levitation and propulsion in Mount Vernon, New York. Bachelet's first related patent, U.S. patent 1,020,942 was granted in 1912. The electromagnetic propulsion was by attraction of iron in
968-460: A coil or simply a piece of plate metal, that is placed in this field will have eddy currents induced in it thus creating an opposing magnetic field, in accordance with Lenz's law . The two opposing fields will repel each other, thus creating motion as the magnetic field sweeps through the metal. In this design a large current is passed through a metal sabot across sliding contacts that are fed by two rails. The magnetic field this generates causes
SECTION 10
#17327650421131056-582: A concern at low speeds, and is one of the reasons why JR abandoned a purely repulsive system and adopted the sidewall levitation system. At higher speeds other modes of drag dominate. The drag force can be used to the electrodynamic system's advantage, however, as it creates a varying force in the rails that can be used as a reactionary system to drive the train, without the need for a separate reaction plate, as in most linear motor systems. Laithwaite led development of such "traverse-flux" systems at his Imperial College laboratory. Alternatively, propulsion coils on
1144-589: A distance of over 65,000 km as of 2018. In 2018 Max Bögl signed a joint venture with the Chinese company Chengdu Xinzhu Road & Bridge Machinery Co. with the Chinese partner given exclusive rights of production and marketing for the system in China. The joint venture constructed a 3.5 km (2.2 mi) demonstration line near Chengdu , China, and two vehicles were airlifted there in June, 2020. In February 2021
1232-612: A high-speed maglev system. Instead, overcoming drag takes the most energy. Vactrain technology has been proposed as a means to overcome this limitation. Despite over a century of research and development, there are only six operational maglev trains today — three in China, two in South Korea, and one in Japan. In the late 1940s, the British electrical engineer Eric Laithwaite , a professor at Imperial College London , developed
1320-402: A large mass driver that can accelerate cargo up to escape velocity , though RLV launch assist like StarTram to low Earth orbit has also been investigated. High-acceleration linear motors are difficult to design for a number of reasons. They require large amounts of energy in very short periods of time. One rocket launcher design calls for 300 GJ for each launch in the space of less than
1408-405: A magnet stator and a moving coil. A Hall effect sensor is attached to the rotor to track the magnetic flux of the stator. The electric current is typically provided from a stationary servo drive to the moving coil by a moving cable inside a cable carrier . In this design, the force is produced by a moving linear magnetic field acting on conductors in the field. Any conductor, be it a loop,
1496-599: A new high-speed maglev line, the Chuo Shinkansen , started in 2014. It is being built by extending the SCMaglev test track in Yamanashi in both directions. The completion date is unknown, with the estimate of 2027 no longer possible following a local governmental rejection of a construction permit. Transrapid 05 was the first maglev train with longstator propulsion licensed for passenger transportation. In 1979,
1584-426: A second. Normal electrical generators are not designed for this kind of load, but short-term electrical energy storage methods can be used. Capacitors are bulky and expensive but can supply large amounts of energy quickly. Homopolar generators can be used to convert the kinetic energy of a flywheel into electric energy very rapidly. High-acceleration linear motors also require very strong magnetic fields; in fact,
1672-551: A single car along a short section of track at the fairgrounds. It was removed after the fair. It was shown at the Aoi Expo in 1987 and is now on static display at Okazaki Minami Park. In 1993, South Korea completed the development of its own maglev train, shown off at the Taejŏn Expo '93 , which was developed further into a full-fledged maglev capable of travelling up to 110 kilometres per hour (68 mph) in 2006. This final model
1760-899: A slotted conduit. Outside of public transportation, vertical linear motors have been proposed as lifting mechanisms in deep mines , and the use of linear motors is growing in motion control applications. They are also often used on sliding doors, such as those of low floor trams such as the Alstom Citadis and the Socimi Eurotram . Dual axis linear motors also exist. These specialized devices have been used to provide direct X - Y motion for precision laser cutting of cloth and sheet metal, automated drafting , and cable forming. Most linear motors in use are LIM (linear induction motor), or LSM (linear synchronous motor). Linear DC motors are not used due to their higher cost and linear SRM suffers from poor thrust. So for long runs in traction LIM
1848-867: A smooth surface finish. All of the following applications are in rapid transit and have the active part of the motor in the cars. Originally developed in the late 1970s by UTDC in Canada as the Intermediate Capacity Transit System (ICTS). A test track was constructed in Millhaven, Ontario , for extensive testing of prototype cars, after which three lines were constructed: ICTS was sold to Bombardier Transportation in 1991 and later known as Advanced Rapid Transit (ART) before adopting its current branding in 2011. Since then, several more installations have been made: All Innovia Metro systems use third rail electrification. One of
SECTION 20
#17327650421131936-499: A station at Kemperplatz on the edge of the Tiergarten park, with three stations in total, the most southernly being on the lower level of the present-day Gleisdreieck U-Bahn interchange. The new section from Kemperplatz and through Bernburger Str. was double track with two parallel guideways, narrowing to single track between Bernburger and Gleisdreieck as it transferred onto the existing U-Bahn viaducts. The M-Bahn guideway used
2024-557: A transfer to the Seoul Metropolitan Subway at AREX 's Incheon International Airport Station and is offered free of charge to anyone to ride, operating between 9 am and 6 pm with 15-minute intervals. The maglev system was co-developed by the South Korea Institute of Machinery and Materials (KIMM) and Hyundai Rotem . It is 6.1 kilometres (3.8 mi) long, with six stations and
2112-504: A vehicle on the Chinese test track hit a top speed of 169 km/h (105 mph). According to the International Maglev Board there are at least four maglev research programmes underway in China at: Southwest Jiaotong University (Chengdu), Tongji University (Shanghai), CRRC Tangshan-Changchun Railway Vehicle Co. , and Chengdu Aircraft Industry Group . The latest high-speed prototype , unveiled in July 2021,
2200-447: A very high speed; for example, see the coilgun . High-acceleration linear motors are typically used in studies of hypervelocity collisions, as weapons , or as mass drivers for spacecraft propulsion . They are usually of the AC linear induction motor (LIM) design with an active three-phase winding on one side of the air-gap and a passive conductor plate on the other side. However,
2288-804: Is HSST (and its descendant, the Linimo line) by Japan Airlines and the other, which is more well known, is SCMaglev by the Central Japan Railway Company . The development of the latter started in 1969. The first successful SCMaglev run was made on a short track at the Japanese National Railways ' (JNR's) Railway Technical Research Institute in 1972. Maglev trains on the Miyazaki test track (a later, 7 km long test track) regularly hit 517 kilometres per hour (321 mph) by 1979. After an accident destroyed
2376-426: Is an electric motor that has had its stator and rotor "unrolled", thus, instead of producing a torque ( rotation ), it produces a linear force along its length. However, linear motors are not necessarily straight. Characteristically, a linear motor's active section has ends, whereas more conventional motors are arranged as a continuous loop. A typical mode of operation is as a Lorentz -type actuator, in which
2464-399: Is controlled, usually electronically, to track the motion of the rotor. For cost reasons synchronous linear motors rarely use commutators , so the rotor often contains permanent magnets, or soft iron . Examples include coilguns and the motors used on some maglev systems, as well as many other linear motors. In high precision industrial automation linear motors are typically configured with
2552-470: Is described in U.S. patent 782,312 (1905 - inventor Alfred Zehden of Frankfurt-am-Main), for driving trains or lifts. The German engineer Hermann Kemper built a working model in 1935. In the late 1940s, Dr. Eric Laithwaite of Manchester University , later Professor of Heavy Electrical Engineering at Imperial College in London developed the first full-size working model. In a single sided version
2640-464: Is inter-operable with steel rail tracks and would permit maglev vehicles and conventional trains to operate on the same tracks. MAN in Germany also designed a maglev system that worked with conventional rails, but it was never fully developed. Each implementation of the magnetic levitation principle for train-type travel involves advantages and disadvantages. Linear motor A linear motor
2728-511: Is levitated by electromagnets rather than rolled on wheels, eliminating rolling resistance . Compared to conventional railways, maglev trains can have higher top speeds, superior acceleration and deceleration, lower maintenance costs, improved gradient handling, and lower noise. However, they are more expensive to build, cannot use existing infrastructure, and use more energy at high speeds. Maglev trains have set several speed records . The train speed record of 603 km/h (375 mph)
M-Bahn - Misplaced Pages Continue
2816-426: Is mostly preferred and for short runs LSM is mostly preferred. High-acceleration linear motors have been suggested for a number of uses. They have been considered for use as weapons , since current armour-piercing ammunition tends to consist of small rounds with very high kinetic energy , for which just such motors are suitable. Many amusement park launched roller coasters now use linear induction motors to propel
2904-736: Is now on display at Railworld in Peterborough, together with the RTV31 hover train vehicle. Another is on display at the National Railway Museum in York. Several favourable conditions existed when the link was built: After the system closed in 1995, the original guideway lay dormant until 2003, when a replacement cable-hauled system, the AirRail Link Cable Liner people mover, was opened. Transrapid,
2992-535: Is produced either by superconducting magnets (as in JR–Maglev) or by an array of permanent magnets (as in Inductrack ). The repulsive and attractive force in the track is created by an induced magnetic field in wires or other conducting strips in the track. A major advantage of EDS maglev systems is that they are dynamically stable—changes in distance between the track and the magnets creates strong forces to return
3080-465: Is typically arranged on a series of C-shaped arms, with the upper portion of the arm attached to the vehicle, and the lower inside edge containing the magnets. The rail is situated inside the C, between the upper and lower edges. Magnetic attraction varies inversely with the square of distance, so minor changes in distance between the magnets and the rail produce greatly varying forces. These changes in force are dynamically unstable—a slight divergence from
3168-414: Is typically the case with electrodynamic suspension maglev trains. Aerodynamic factors may also play a role in the levitation of such trains. The two main types of maglev technology are: In electromagnetic suspension (EMS) systems, the train levitates by attraction to a ferromagnetic (usually steel) rail while electromagnets , attached to the train, are oriented toward the rail from below. The system
3256-524: The Berlin U-Bahn to be built included an elevated section between Gleisdreieck and Potsdamer Platz stations. After the partition of Berlin, Gleisdreieck station was in West Berlin whilst Potsdamer Platz station was directly under the border to East Berlin . After the building of the Berlin Wall in 1961, the trains from both sides terminated at the last station before Potsdamer Platz (from
3344-664: The British Rail Research Division in Derby , along with teams at several civil engineering firms, the "transverse-flux" system was developed into a working system. The first commercial maglev people mover was simply called " MAGLEV " and officially opened in 1984 near Birmingham , England. It operated on an elevated 600 metres (2,000 ft) section of monorail track between Birmingham Airport and Birmingham International railway station , running at speeds up to 42 kilometres per hour (26 mph). The system
3432-624: The Shanghai maglev train , for instance, is an LSM. Brushless linear motors are members of the Synchronous motor family. They are typically used in standard linear stages or integrated into custom, high performance positioning systems . Invented in the late 1980s by Anwar Chitayat at Anorad Corporation, now Rockwell Automation , and helped improve the throughput and quality of industrial manufacturing processes. Brushed linear motors were used in industrial automation applications prior to
3520-565: The Throgs Neck Bridge , James Powell , a researcher at Brookhaven National Laboratory (BNL), thought of using magnetically levitated transportation. Powell and BNL colleague Gordon Danby worked out a maglev concept using static magnets mounted on a moving vehicle to induce electrodynamic lifting and stabilizing forces in specially shaped loops, such as figure-of-8 coils on a guideway. These were patented in 1968–1969. Japan operates two independently developed maglev trains. One
3608-505: The Tracked Hovercraft RTV-31, based near Cambridge, UK, although the project was cancelled in 1973. The linear motor was naturally suited to use with maglev systems as well. In the early 1970s, Laithwaite discovered a new arrangement of magnets, the magnetic river , that allowed a single linear motor to produce both lift and forward thrust, allowing a maglev system to be built with a single set of magnets. Working at
M-Bahn - Misplaced Pages Continue
3696-596: The East: Mohrenstraße ). Around 1972 also the two stations before Potsdamer Platz, on the western side, closed, because the area served by these stations was also served by another U-Bahn line. The area of West Berlin adjacent to Potsdamer Platz then required a connection to the U-Bahn, and this need was eventually met by the construction of the M-Bahn, which used the abandoned U-Bahn platforms at Gleisdreieck and
3784-621: The Japanese Linimo magnetic levitation train line near Nagoya . However, linear motors have been used independently of magnetic levitation, as in the Bombardier Innovia Metro systems worldwide and a number of modern Japanese subways, including Tokyo 's Toei Ōedo Line . Similar technology is also used in some roller coasters with modifications but, at present, is still impractical on street running trams , although this, in theory, could be done by burying it in
3872-522: The M-Bahn from its right of way. The principal need for the M-Bahn had also been removed, as the area served by it was again easily accessible from the Potsdamer Platz station. Dismantling of the M-Bahn started only two months after its official opening, and was completed during February 1992. The U-Bahn connection between Gleisdreieck and Potsdamer Platz Stations was reinstated, becoming part of line U2 . The line ran approximately north-south from
3960-649: The M-Bahn used a long stator linear motor . However, unlike the Transrapid and other magnetic levitation trains , only 85% of the M-Bahn vehicle weight was supported by magnetic levitation , with the balance being supported by traditional wheels. During operation, the Berlin M-Bahn line ran as an automated driverless operation, although the system had been designed to be driven by a human driver if required. A cross-over existed just south of Kemperplatz, to allow use of double-track running. The M-Bahn train
4048-509: The Mummy at Universal Studios Singapore opened in 2010. They both use LIMs to accelerate from certain point in the rides. Revenge of the Mummy also located at Universal Studios Hollywood and Universal Studios Florida . The Incredible Hulk Coaster and VelociCoaster at Universal Islands of Adventure also use linear motors. At Walt Disney World , Rock 'n' Roller Coaster Starring Aerosmith at Disney's Hollywood Studios and Guardians of
4136-551: The U-Bahn tracks northwards towards the border. It then diverged slightly to the west to terminate close to Potsdamer Platz but still in West Berlin. Work on the line started in 1983, and the first test runs, without passengers, took place in June 1984 on the southern section of the line. Initial testing used a car previously used on Magnetbahn GmbH's test track near Brunswick , and the first two cars specifically built for Berlin were delivered in late 1986. The original intention
4224-739: The applied force is linearly proportional to the current and the magnetic field ( F → = I L → × B → ) {\displaystyle ({\vec {F}}=I{\vec {L}}\times {\vec {B}})} . Linear motors are most commonly found in high accuracy engineering applications. Many designs have been put forward for linear motors, falling into two major categories, low-acceleration and high-acceleration linear motors. Low-acceleration linear motors are suitable for maglev trains and other ground-based transportation applications. High-acceleration linear motors are normally rather short, and are designed to accelerate an object to
4312-591: The biggest challenges faced by Japanese railway engineers in the 1970s to the 1980s was the ever increasing construction costs of subways. In response, the Japan Subway Association began studying on the feasibility of the "mini-metro" for meeting urban traffic demand in 1979. In 1981, the Japan Railway Engineering Association studied on the use of linear induction motors for such small-profile subways and by 1984
4400-536: The construction of the Berlin Wall . It was rendered redundant by the reunification of Berlin and was closed to enable reconstruction of the U2 line. It was Europe's only operational maglev line. The M-Bahn was the second Maglev line to open to public traffic, after the Birmingham Maglev but before the Shanghai maglev train . Construction and running were undertaken by Magnetbahn GmbH. The first section of
4488-402: The direct current homopolar linear motor railgun is another high acceleration linear motor design. The low-acceleration, high speed and high power motors are usually of the linear synchronous motor (LSM) design, with an active winding on one side of the air-gap and an array of alternate-pole magnets on the other side. These magnets can be permanent magnets or electromagnets . The motor for
SECTION 50
#17327650421134576-414: The distance of 30.5 kilometres (19 mi) in just over 8 minutes. Different maglev systems achieve levitation in different ways, which broadly fall into two categories: electromagnetic suspension (EMS) and electrodynamic suspension (EDS) . Propulsion is typically provided by a linear motor . The power needed for levitation is typically not a large percentage of the overall energy consumption of
4664-457: The downside, the dynamic instability demands fine track tolerances, which can offset this advantage. Eric Laithwaite was concerned that to meet required tolerances, the gap between magnets and rail would have to be increased to the point where the magnets would be unreasonably large. In practice, this problem was addressed through improved feedback systems, which support the required tolerances. Air gap and energy efficiency can be improved by using
4752-537: The field exerted by magnets on the train and the applied field creates a force moving the train forward. The term "maglev" refers not only to the vehicles, but to the railway system as well, specifically designed for magnetic levitation and propulsion. All operational implementations of maglev technology make minimal use of wheeled train technology and are not compatible with conventional rail tracks . Because they cannot share existing infrastructure, maglev systems must be designed as standalone systems. The SPM maglev system
4840-425: The first full-size working model of the linear induction motor . He became professor of heavy electrical engineering at Imperial College in 1964, where he continued his successful development of the linear motor. Since linear motors do not require physical contact between the vehicle and guideway, they became a common fixture on advanced transportation systems in the 1960s and 1970s. Laithwaite joined one such project,
4928-726: The following subway lines in Japan use linear motors and use overhead lines for power collection: In addition, Kawasaki Heavy Industries has also exported the Linear Metro to the Guangzhou Metro in China; all of the Linear Metro lines in Guangzhou use third rail electrification: There are many roller coasters throughout the world that use LIMs to accelerate the ride vehicles. The first being Flight of Fear at Kings Island and Kings Dominion , both opening in 1996. Battlestar Galactica: Human VS Cylon & Revenge of
5016-462: The guideway and the train exert a magnetic field, and the train is levitated by the repulsive and attractive force between these magnetic fields. In some configurations, the train can be levitated only by repulsive force. In the early stages of maglev development at the Miyazaki test track, a purely repulsive system was used instead of the later repulsive and attractive EDS system. The magnetic field
5104-418: The guideway are used to exert a force on the magnets in the train and make the train move forward. The propulsion coils that exert a force on the train are effectively a linear motor: an alternating current through the coils generates a continuously varying magnetic field that moves forward along the track. The frequency of the alternating current is synchronized to match the speed of the train. The offset between
5192-401: The invention of Brushless linear motors. Compared with three phase brushless motors, which are typically being used today, brush motors operate on a single phase. Brush linear motors have a lower cost since they do not need moving cables or three phase servo drives. However, they require higher maintenance since their brushes wear out. In this design the rate of movement of the magnetic field
5280-1053: The large radius of curvature. Linear motors may also be used as an alternative to conventional chain-run lift hills for roller coasters. The coaster Maverick at Cedar Point uses one such linear motor in place of a chain lift. A linear motor has been used to accelerate cars for crash tests . The combination of high precision, high velocity, high force, and long travel makes brushless linear motors attractive for driving industrial automations equipment. They serve industries and applications such as semiconductor steppers , electronics surface-mount technology , automotive cartesian coordinate robots , aerospace chemical milling , optics electron microscope , healthcare laboratory automation , food and beverage pick and place . Synchronous linear motor actuators , used in machine tools, provide high force, high velocity, high precision and high dynamic stiffness, resulting in high smoothness of motion and low settling time. They may reach velocities of 2 m/s and micron-level accuracies, with short cycle times and
5368-613: The maglev theme was continued by the Engineering Research Center "TEMP" (ИНЦ "ТЭМП") this time by the order from the Moscow government . The project was named V250 (В250). The idea was to build a high-speed maglev train to connect Moscow to the Sheremetyevo airport . The train would consist of 64-seater cars and run at speeds up to 250 kilometres per hour (160 mph). In 1993, due to the financial crisis ,
SECTION 60
#17327650421135456-422: The magnetic fields are often too strong to permit the use of superconductors . However, with careful design, this need not be a major problem. Two different basic designs have been invented for high-acceleration linear motors: railguns and coilguns . Linear motors are commonly used for actuating high performance industrial automation equipment. Their advantage, unlike any other commonly used actuator, such as
5544-431: The magnetic repulsion forces the conductor away from the stator, levitating it, and carrying it along in the direction of the moving magnetic field. He called the later versions of it magnetic river . The technologies would later be applied, in the 1984, Air-Rail Link shuttle, between Birmingham's airport and an adjacent train station. Because of these properties, linear motors are often used in maglev propulsion, as in
5632-445: The metal to be projected along the rails. Efficient and compact design applicable to the replacement of pneumatic cylinders . Piezoelectric drive is often used to drive small linear motors. The history of linear electric motors can be traced back at least as far as the 1840s, to the work of Charles Wheatstone at King's College London , but Wheatstone's model was too inefficient to be practical. A feasible linear induction motor
5720-472: The optimum position tends to grow, requiring sophisticated feedback systems to maintain a constant distance from the track, (approximately 15 millimetres [0.59 in]). The major advantage to suspended maglev systems is that they work at all speeds, unlike electrodynamic systems, which only work at a minimum speed of about 30 kilometres per hour (19 mph). This eliminates the need for a separate low-speed suspension system, and can simplify track layout. On
5808-501: The project was abandoned. However, from 1999 the "TEMP" research center had been participating as a co-developer in the creation of the linear motors for the Moscow Monorail system. The world's first commercial maglev system was a low-speed maglev shuttle that ran between the airport terminal of Birmingham International Airport and the nearby Birmingham International railway station between 1984 and 1995. Its track length
5896-830: The public imagination, "maglev" often evokes the concept of an elevated monorail track with a linear motor . Maglev systems may be monorail or dual rail—the SCMaglev MLX01 for instance uses a trench-like track—and not all monorail trains are maglevs. Some railway transport systems incorporate linear motors but use electromagnetism only for propulsion , without levitating the vehicle. Such trains have wheels and are not maglevs. Maglev tracks, monorail or not, can also be constructed at grade or underground in tunnels. Conversely, non-maglev tracks, monorail or not, can be elevated or underground too. Some maglev trains do incorporate wheels and function like linear motor-propelled wheeled vehicles at slower speeds but levitate at higher speeds. This
5984-489: The registration of Bachelet Levitated Railway Syndicate Limited July 9 in London, just weeks before the start of WWI. Bachelet's second related patent, U.S. patent 1,020,943 granted the same day as the first, had the levitation electromagnets in the train and the track was aluminum plate. In the patent he stated that this was a much cheaper construction, but he did not demonstrate it. In 1959, while delayed in traffic on
6072-458: The socalled "Hybrid Electromagnetic Suspension (H-EMS)", where the main levitation force is generated by permanent magnets, while the electromagnet controls the air gap, what is called electropermanent magnets . Ideally it would take negligible power to stabilize the suspension and in practice the power requirement is less than it would be if the entire suspension force were provided by electromagnets alone. In electrodynamic suspension (EDS), both
6160-406: The system to its original position. In addition, the attractive force varies in the opposite manner, providing the same adjustment effects. No active feedback control is needed. However, at slow speeds, the current induced in these coils and the resultant magnetic flux is not large enough to levitate the train. For this reason, the train must have wheels or some other form of landing gear to support
6248-554: The train at a high speed, as an alternative to using a lift hill . The United States Navy is also using linear induction motors in the Electromagnetic Aircraft Launch System that will replace traditional steam catapults on future aircraft carriers. They have also been suggested for use in spacecraft propulsion . In this context they are usually called mass drivers . The simplest way to use mass drivers for spacecraft propulsion would be to build
6336-494: The train by direct current solenoids spaced along the track. The electromagnetic levitation was due to repulsion of the aluminum base plate of the train by the pulsating current electromagnets under the track. The pulses were generated by Bachelet's own Synchronizing-interrupter U.S. patent 986,039 supplied with 220 VAC. As the train moved it switched power to the section of track that it was on. Bachelet went on to demonstrate his model in London, England in 1914, which resulted in
6424-456: The train until it reaches take-off speed. Since a train may stop at any location, due to equipment problems for instance, the entire track must be able to support both low- and high-speed operation. Another downside is that the EDS system naturally creates a field in the track in front and to the rear of the lift magnets, which acts against the magnets and creates magnetic drag. This is generally only
6512-489: The train, a new design was selected. In Okazaki , Japan (1987), the SCMaglev was used for test rides at the Okazaki exhibition. Tests in Miyazaki continued throughout the 1980s, before transferring to a far longer test track, 20 kilometres (12 mi) long, in Yamanashi in 1997. The track has since been extended to almost 43 kilometres (27 mi). The 603 kilometres per hour (375 mph) world speed record for crewed trains
6600-399: The western side of the viaducts approaching and into the single platform at Gleisdreieck, with standard gauge railway track remaining on the eastern side. Both Kemperplatz and Bernburger Str. stations have since been demolished, along with structure carrying the M-Bahn between them. The M-Bahn operated a total of eight cars, although not all were used in public service. For propulsion,
6688-411: Was 600 metres (2,000 ft), and trains levitated at an altitude of 15 millimetres [0.59 in], levitated by electromagnets, and propelled with linear induction motors. It operated for 11 years and was initially very popular with passengers, but obsolescence problems with the electronic systems made it progressively unreliable as years passed, leading to its closure in 1995. One of the original cars
6776-404: Was awarded U.S. patent 782,312 (14 February 1905) and U.S. patent RE12700 (21 August 1907). In 1907, another early electromagnetic transportation system was developed by F. S. Smith. In 1908, Cleveland mayor Tom L. Johnson filed a patent for a wheel-less "high-speed railway" levitated by an induced magnetic field. Jokingly known as "Greased Lightning," the suspended car operated on
6864-481: Was closed in 1995 due to reliability problems. High-speed transportation patents were granted to various inventors throughout the world. The first relevant patent, U.S. patent 714,851 (2 December 1902), issued to Albert C. Albertson, used magnetic levitation to take part of the weight off of the wheels while using conventional propulsion. Early United States patents for a linear motor propelled train were awarded to German inventor Alfred Zehden . The inventor
6952-639: Was for public service to start in May 1987, but a fire at Gleisdreieck Station in April of that year destroyed one of the two cars and badly damaged the other. Eventually four more cars, of the same design as the original two, were built. Several planned opening dates were not met, and in December 1988, a test train failed to stop at Kemperplatz and one of the cars crashed to the ground and was destroyed. A public service eventually started in August 1989, although service
7040-654: Was incorporated in the Incheon Airport Maglev which opened on 3 February 2016, making South Korea the world's fourth country to operate its own self-developed maglev after the United Kingdom's Birmingham International Airport, Germany's Berlin M-Bahn , and Japan 's Linimo . It links Incheon International Airport to the Yongyu Station and Leisure Complex on Yeongjong island . It offers
7128-407: Was intermittent and not guaranteed, and fares were not charged. Official regular passenger service, as part of Berlin's integrated public transport system, started in July 1991. By this time the Berlin Wall had fallen , something that could not have been predicted when construction started. It became desirable to re-establish the U-Bahn line that had previously been severed, requiring the removal of
7216-723: Was investigating on the practical applications of linear motors for urban rail with the Japanese Ministry of Land, Infrastructure, Transport and Tourism . In 1988, a successful demonstration was made with the Limtrain at Saitama and influenced the eventual adoption of the linear motor for the Nagahori Tsurumi-ryokuchi Line in Osaka and Toei Line 12 (present-day Toei Oedo Line ) in Tokyo . To date,
7304-511: Was investigating reviving the Emsland test track. In May 2019 CRRC had unveiled its "CRRC 600" prototype which is designed to reach 600 kilometres per hour (370 mph). In Vancouver, Canada, the HSST-03 by HSST Development Corporation ( Japan Airlines and Sumitomo Corporation ) was exhibited at Expo 86 , and ran on a 400-metre (0.25 mi) test track that provided guests with a ride in
7392-672: Was manufactured by CRRC Qingdao Sifang . Development of the low-to-medium speed systems, that is, 100–200 km/h (62–124 mph), by the CRRC has led to opening lines such as the Changsha Maglev Express in 2016 and the Line S1 in Beijing in 2017. In April 2020 a new model capable of 160 km/h (99 mph) and compatible with the Changsha line completed testing. The vehicle, under development since 2018, has
7480-432: Was set by the experimental Japanese L0 Series maglev in 2015. From 2002 until 2021, the record for the highest operational speed of a passenger train of 431 kilometres per hour (268 mph) was held by the Shanghai maglev train , which uses German Transrapid technology. The service connects Shanghai Pudong International Airport and the outskirts of central Pudong , Shanghai . At its historical top speed, it covered
7568-661: Was set there in 2015. Development of HSST started in 1974. In Tsukuba , Japan (1985), the HSST-03 ( Linimo ) became popular at the Tsukuba World Exposition , in spite of its low 30 kilometres per hour (19 mph) top speed. In Saitama , Japan (1988), the HSST-04-1 was revealed at the Saitama exhibition in Kumagaya . Its fastest recorded speed was 300 kilometres per hour (190 mph). Construction of
7656-505: Was supported across the points by a length of traditional rail below the guideway to support it across the gap. The disused elevated track features at some length as a backdrop in Wim Wenders's 1987 film Wings of Desire . Download coordinates as: Magnetic levitation train Maglev (derived from magnetic levitation ) is a system of rail transport whose rolling stock
7744-542: Was supposed to connect the cities of Yerevan and Sevan via the city of Abovyan . The original design speed was 250 kilometres per hour (160 mph) which was later lowered to 180 kilometres per hour (110 mph). However, the Spitak earthquake in 1988 and the First Nagorno-Karabakh War caused the project to freeze. In the end the overpass was only partially constructed. In the early 1990s,
#112887