129-806: The Twin Zephyrs , also known as the Twin Cities Zephyrs , were a pair of streamlined passenger trains on the Chicago, Burlington and Quincy Railroad (CB&Q), running between Chicago and the Twin Cities of Minneapolis and Saint Paul in Minnesota . It was the second Zephyr service introduced by CB&Q after the record-setting Denver – Chicago "dawn to dusk dash" of the Pioneer Zephyr trainset. The train competed with
258-430: A "Rocky Mountain canary" so the train's crew had originally planned only enough space for a birdcage; when they found out it was not a bird, the railroad hastily built a pen in the baggage section and bought some hay for it. When asked about the burro, Ralph Budd replied "why not? One more jackass on this trip won't make a difference." The train continued east from Halsted Station to the 1934 Century of Progress fair on
387-594: A 1,200-+-900-horsepower (890 + 670 kW) cab/booster locomotive pulling nine cars of the same form. Automotive-styled cab/booster locomotive sets with 1,200-horsepower (890 kW) engines powered the Union Pacific's City of San Francisco and City of Denver sets. The two City of Denver sets started service two cars shorter than the M-10002 and M-10004 sets, with roomier and heavier straight-sided cars. The Union Pacific's initial streamliner service to
516-417: A Century of Progress exhibit. The Zephyr covered the distance in 13 hours, reaching a top speed of 112.5 mph (181.1 km/h) and running an average speed of 77.6 mph (124.9 km/h). The fuel for the run cost US$ 14.64 at 4¢ per U.S. gallon (equivalent to $ 333 and $ 9 per gallon respectively in 2023 after inflation). The Burlington's event was covered live on radio and drew large, cheering crowds as
645-687: A catastrophic loss of business with the Great Depression . Originally named the Burlington Zephyr during its demonstration period, it became the Pioneer Zephyr as Burlington expanded its fleet of Zephyr trainsets. On May 26, 1934, it set a speed record for travel between Denver and Chicago when it made a 1,015.4-mile (1,633 km) non-stop "Dawn-to-Dusk" dash in 13 hours 5 minutes at an average speed of almost 78 mph (124 km/h). For one section of
774-422: A demonstration run from Chicago to Saint Paul in 5 hours 31 minutes, at speeds up to 104 mph and an average between endpoints of 77.65 mph. These two trainsets proved too small so a second pair of six-car trains with matching locomotives were ordered as replacements. The new trainsets were put on display before they entered service. The second pair of Twin Zephyrs entered service on December 18, 1936, as
903-694: A dining car and a dome parlor observation car. They served as a prototype of the 1949 California Zephyr which had sleeping cars in addition. In 1977 the "Train of the Gods" was refurbished and delivered to Saudi Arabia for use on the Dammam–Riyadh line . The Twin Zephyr ran on the Burlington Route from Chicago to St. Paul. Today these lines belong to the BNSF Railway as these subdivisions of
1032-671: A half hours, an average of over 78 mph. For several years in the 1950s the schedules along the Mississippi from East Dubuque, Illinois to Prairie du Chien, Wisconsin and from Prairie du Chien to La Crosse were the fastest in the world, and in 1964 the Morning Zephyr had the fastest station-to-station time in the United States between Aurora and Rochelle, Illinois . All three runs were made at over 80 miles (130 km) per hour from start to station stop. By 1964
1161-565: A more modern image for the traveling public, to restore profitability to passenger service. One of the railroad presidents who faced this challenge was Ralph Budd , formerly of the Great Northern Railway and from 1932 president of the Chicago, Burlington and Quincy Railroad (the Burlington Route). In 1932 Ralph Budd met Edward G. Budd (no relation), an automotive steel pioneer who was founder and president of
1290-767: A more streamlined nose than do previous TGVs. In 2015, Eurostar began to operate the electric multiple unit (EMU) British Rail Class 374 , also known as the Eurostar e320, on its high-speed services through the Channel Tunnel . The train serves destinations beyond Eurostar's core routes to the Gare du Nord station in Paris and the Brussels-South railway station . Owned by Eurostar International Limited and capable of operating at 320 km/h (199 mph),
1419-867: A pair of partially-articulated ten-car trainsets in November 1936. The Burlington moved the Denver Zephyr ' s six-cat sets to the Twin Cities Zephyr , transferring that train's original streamlined cars to other Burlington routes. The last of the classic Zephyrs was built for the Burlington's Kansas City–Saint Louis General Pershing Zephyr route. That trainset, which contained GM's newest 1,000-horsepower (750 kW) engine and conventional coupling, entered service in June 1939. The Burlington's original Zephyr trainsets remained in service in
SECTION 10
#17327870171091548-650: A party in Mount Pleasant, Iowa , for static display in a town park, but plans for the train's display did not work out; in 2002 car 500 and the Mark Twain Zephyr were stored in Granite City, Illinois , with plans to display it in Fairfield, Iowa . As of 2020, there are plans to restore the trainset to operational condition. MSI displayed the Pioneer Zephyr outdoors, with no protection from
1677-505: A second pair of six-car trains (soon expanded to seven cars) was delivered in November 1936. These trainsets also were articulated. One train was called " The Train of the Goddesses " and the cars were named Ceres, Diana, Juno, Minerva, Psyche, Venus, and Vesta. The other trainset was known as " The Train of the Gods " and the cars were named for mythological figures Apollo, Cupid, Jupiter, Mars, Mercury, Neptune, and Vulcan. Motive power for
1806-547: A streamlined style. The South Manchuria Railway , which was under Japanese control at that time, also designed the Pashina class streamlined locomotive. The Railway operated the Asia Express , whose style was coordinated with that of Pashina locomotives. These streamlined steam locomotives took many man-hours to repair due to their casing. After the outbreak of World War II , the lack of an experienced labor force made
1935-557: A streamlined style. The selected locomotive was No. 43 of class C53. However Hideo Shima , the chief engineer of the conversion, thought streamlining had no practical effect on reducing air resistance, because Japanese trains at that time did not exceed a speed of 62 mph (100 km/h). Shima therefore designed the locomotive to create airflow that lifted exhaust smoke away from the locomotive. He had expected no practical effect on reducing air resistance completely, therefore he never tried to test fuel consumption or tractive force of
2064-535: A top speed of 112.5 mph (181.1 km/h). This was the fastest authenticated speed reached by a steam locomotive at the time, making #2 the rail speed record holder for steam and the first steam locomotive to top 110 mph (180 km/h). That record lasted until a German DRG Class 05 locomotive exceeded it the following year. The Illinois Central 121 trainset was the first of the Green Diamond streamliners running between Chicago and St Louis. It
2193-457: A useful life of over 500,000 miles. The problems were most acute under the operating conditions of locomotive, rather than stationary or marine, use. Even with the problems of the Winton 201A, their maintenance regime was significantly lower than for steam locomotives. The Zephyr' s power (leading) car was numbered 9900, the baggage-coach combine car 505, and the coach-observation 570. The train
2322-959: Is a diesel-powered trainset built by the Budd Company in 1934 for the Chicago, Burlington & Quincy Railroad (CB&Q), commonly known as the Burlington Route. The trainset was the second internal combustion -powered streamliner built for mainline service in the United States (after the Union Pacific Railroad 's M-10000 ), the first such train powered by a diesel engine , and the first to enter revenue service. The trainset consists of one power/storage car, one baggage/ RPO /buffet/coach car, and one coach/observation car. The cars are made of stainless steel , permanently articulated together with Jacobs bogies . The construction incorporated recent advances such as shotwelding (a specialized type of spot welding ) to join
2451-442: Is generally regarded as the first successful streamliner on American railroads. In the early 1930s, the Great Depression caused a catastrophic loss of business for American railroads. Passenger service had been losing ridership to automobile travel since the mid-1920s, making faster, more efficient service imperative for railroads to compete. Railroads needed to lower operating costs of passenger service and boost ridership with
2580-610: The Flying Yankee . Budd and GM delivered the first additional Zephyrs , identical trainsets 9901 and 9902, in time for an April 1935 debut as the Twin Zephyrs , operating between Chicago and Minneapolis - Saint Paul. In all, the Burlington Route ordered eight additional Zephyrs , gradually departing from the semi-permanently coupled design of the Pioneer Zephyr towards regularly coupled cars that could easily be interchanged. The Winton two-stroke diesel engines used in
2709-554: The M-10000 (designated first as The Streamliner and later as the City of Salina when in revenue service from 1935 to 1941). The Burlington initially named its first train the Burlington Zephyr . The two railroads' trains each entered service as three-car articulated sets (including the power car). The Winton Engine Corporation , a subsidiary of General Motors (GM) , manufactured the engines for both locomotives. The prime mover for
SECTION 20
#17327870171092838-599: The Morning Zephyr and the Afternoon Zephyr . On the first run the two trainsets departed Chicago simultaneously on parallel tracks with 44 pairs of twins as a publicity stunt. In 1935 Zephyrs were scheduled to cover 431 miles (694 km) between Chicago and St Paul in six and a half hours, later reduced to six hours and 15 minutes. At first each trainset made one one-way trip a day, but in July 1935 each
2967-782: The Twin Cities Hiawatha run. The Hudsons could cruise above 110 mph (177 km/h) and were said to exceed 120 mph (193 km/h) on occasion. Otto Kuhler designed the Milwaukee Road's speedsters with "shovel nose" styling. Some of the class 7's details were evocative of those of the Zephyrs . Also in 1937, the Electro-Motive Corporation (EMC)—later incorporated into GM's Electro-Motive Division (EMD) —started production of streamlined diesel-electric passenger locomotives, incorporating
3096-777: The Afternoon Zephyr taking the Empire Builder and North Coast Limited to the Twin Cities, and the Morning Zephyr taking the two trains to Chicago. The Twin Zephyr ran for 36 years until 1971 when Amtrak took over most intercity passenger trains in the United States. The first pair of three-car Twin Zephyr trainsets were very similar to the original Pioneer Zephyr , and were articulated trains riding on four trucks. This pair, delivered in April 1935, quickly proved too small to cope with passenger loads, and
3225-498: The Budd Company . Edward Budd was demonstrating his new Budd-Michelin rubber-tired rail cars built of stainless steel . Pneumatic-wheeled railcars never found popularity for actual service in the US — they tended to derail — but they demonstrated the successful construction of lightweight stainless steel unibody railcars. Some power-trailer car sets in that series articulated with Jacobs bogies shared between cars embodied
3354-484: The Burlington Zephyr' s diesel-electric propulsion was a new 600 hp diesel engine. The Union Pacific's M-10000 had a 600-horsepower (450 kW) spark-ignition engine that ran on "petroleum distillate", a fuel similar to kerosene. The two trainsets were star attractions at the 1934 World's Fair (" A Century of Progress ") in Chicago, Illinois . During its set's demonstration period, the Union Pacific named
3483-862: The Chicago and North Western 's Twin Cities 400 which ceased operation in 1963, and the Milwaukee Road 's Twin Cities Hiawatha , which, like the Zephyr , ended with the coming of Amtrak in 1971. The CB&Q trains went west from Chicago to the Mississippi River and along that river to Saint Paul, while the North Western and Milwaukee Road trains traveled via Milwaukee . Two three-car trainsets, numbered 9901 and 9902, were delivered in April 1935. On April 6 number 9901 made
3612-614: The City of Denver trains. The train's cars then became spare equipment. The two City of Denver trainsets ( M–10005 and M–10006), after cannibalizing power from the M-10001 and M-10004 , remained in service until 1953. Class GG1 electric locomotives brought streamlined styling to the Pennsylvania Railroad 's fleet of electric locomotives in late 1934. Meanwhile, the Boston and Maine 's Flying Yankee , identical to
3741-643: The ETR 401 ("Pendolino") , the ETR 450 ("Pendolino") and the ETR 500 . Streamliner service temporarily ended in the United Kingdom with the outbreak of WWII. During the war, the LNER and LMS streamlined locomotives had part of their streamlining removed to aid maintenance. By the late 1940s and early 1950s, the state of the railways was improving as deteriorated track conditions caused by delayed maintenance work were corrected. The repairs and new improvements enabled
3870-470: The Empire Builder of the Great Northern Railway , both of which ran to the West Coast. Although the railroad's passenger service as a whole carried more passengers in 1964 than in 1949, by 1964 all four daytime Zephyrs along the Mississippi operated at a loss. To save money, trains were often consolidated in off-peak times starting in 1960, and eventually the four daytime trains were reduced to two, with
3999-698: The Ford Motor Company concurrent with Ford's development of its Trimotor aircraft. In 1931, Pullman enlisted the services of the Trimotor design contributor William Bushnell Stout to apply airplane fuselage design concepts to railcars. The result was the Railplane (not the Bennie Railplane ), a streamlined self-propelled railcar with a tapered cross-section, lightweight tubular aluminum space frame and duralumin skin. In testing with
Twin Zephyr - Misplaced Pages Continue
4128-570: The Gulf, Mobile and Northern Railroad in 1932, it reportedly reached 90 mph (145 km/h). The Union Pacific had been seeking improvements to self-propelled railcars based on European design ideas. The performance of the Railplane encouraged the railroad to increase its efforts in partnership with Pullman-Standard. In 1931, the Budd Company reached an agreement with the French tire company Michelin to produce pneumatic-tired rail motorcars in
4257-538: The Hobart to Launceston expresses. Despite — or perhaps because of — the strategic priorities of World War II, some new streamliner locomotives were built in Australia during and immediately after the war. The first five New South Wales C38 class locomotives were modestly streamlined with distinctive conical noses, while the twelve South Australian Railways 520 class locomotives featured extravagant streamlining in
4386-476: The M-10000 as a three-car set until the railroad was retired the set in 1941. The trainset's 1942 scrapping provided Duralumin that was recycled for use in war-time military aircraft. The Union Pacific also commissioned the construction of five modified trainsets that had evolved from the initial M-10000 design. Those streamlined trains inaugurated the railroad's high-speed service out of Chicago while bearing
4515-540: The M-10000 as the Streamliner , providing the first use of the term with respect to trains. The Streamliner ' s publicity tour in February–May 1934 attracted over a million visitors and gained attention in national media as the herald of a new era in rail transportation. On 26 May 1934, the Burlington's Zephyr made a record-breaking "Dawn to Dusk" run from Denver, Colorado , to Chicago for its grand entry as
4644-435: The Milwaukee Road in 1935 were a direct response to (and directly competed with) the Burlington Route's Zephyrs . On May 26, 1960, the 26th anniversary of the "Dawn-to-Dusk" dash, the original Pioneer Zephyr train (car numbers 9900, 505 and 570) was donated to Chicago's Museum of Science & Industry (MSI). Car number 500, which operated with the train from 1938, went along with Mark Twain Zephyr trainset 9903 to
4773-776: The New York Central Railroad 's Ohio Xplorer and the New York, New Haven and Hartford Railroad 's Dan'l Webster . The pair were problematic and were withdrawn from service by 1960. GM 's project, originally called Train Y , was marketed as the Aerotrain . It featured a futuristic, automotive-styled EMD LWT12 diesel–electric locomotive pulling aluminum coaches adapted from GM's long-distance bus design. Two trainsets were produced in 1955 and were trialed by several railroads, but no orders were forthcoming. The two demonstration units were eventually sold to
4902-700: The Northlander until 1992. From 1961, the SBB used for TEE service the RAe TEE II , a set of five streamlined electric trains compatible with four different railway electrification systems . Italy used pre-war trains and new trains that the Italian State Railways—Ferrovie dello Stato (FS)—developed. The new trains included the FS Class ETR 250 ("Arlecchino") , the ETR 300 ("Settebello") ,
5031-462: The Pioneer Zephyr had several key differences, including the use of a diesel powerplant and stainless steel construction, in contrast to the M-10000's gasoline powerplant and aluminum construction. These two design decisions had a profound influence on future streamliners and other passenger trains, which had more in common with the Zephyr than the M-10000. The streamlined Hiawathas launched by
5160-547: The Portland–Seattle run until the railroad took it out of service again in March 1943. After running for 18 months as the City of San Francisco M-10004 , the locomotive spent six months being refurbished and then served from July 1938 as a second unit on the City of Los Angeles . The Union Pacific retired the locomotive in March 1939. The Union Pacific converted the M-10001 and M-10004 power units to additional boosters for
5289-565: The Rock Island Line , which was already operating an EMD LWT12 paired with Talgo II cars from ACF Industries as the Jet Rocket . Rock Island operated them in commuter service until 1966. The Speed Merchant project also produced only two examples. They consisted of Fairbanks-Morse P-12-42 locomotives paired with Talgo II cars from ACF Industries, and were used by the Boston and Maine Railroad for commuter service and by
Twin Zephyr - Misplaced Pages Continue
5418-614: The Zephyr brand, with perhaps the best known being the California Zephyr . In 1948 and 1949, the Pioneer Zephyr was temporarily removed from service to participate in the Chicago Railroad Fair 's "Wheels A-Rolling" pageant. The fair's purpose was to celebrate 100 years of railroad history west of Chicago, and the Pioneer Zephyr 's role in the pageant was to highlight the latest strides in railroad technology. It resumed regular passenger operations when
5547-490: The Zephyr power units and early EMC designs, while a breakthrough in locomotive power, were an immature technology. Some of their early reliability problems were mitigated with changes to individual parts such as pistons; other solutions had to wait for a differently designed engine. For example, the first generation of pistons in the Winton engine only had about 50,000 miles of useful life, later extended to about 100,000 miles. GM's next generation diesel engine had pistons with
5676-480: The aluminum trains are sixteen-unit versions of the Siemens Velaro . High-speed steam service continued in the United States after World War II, but became increasingly uneconomical. The New York Central's Super Hudsons went out of service in 1948 as the line converted to diesel for passenger service. The Milwaukee Road retired its high speed Hiawatha steam locomotives between 1949 and 1951. The last of
5805-532: The "silver streak" zipped by. Adding to the sensation of the Zephyr were the striking appearance of its fluted stainless steel bodywork and its raked, rounded, aerodynamic front end that symbolized its modernity. The train's design echoed in steam locomotive styling throughout the following years. After its Worlds Fair display and a nationwide demonstration tour, the Zephyr entered revenue service between Kansas City, Missouri, and Lincoln, Nebraska, on 11 November 1934. A total of nine Zephyr trainsets were built for
5934-511: The 1920s. In 1931, the J. G. Brill Company introduced the Bullet , a lightweight, wind-tunnel designed car with a rounded front that could run either singly or in multiple-unit sets, capable of speeds over 90 mph (145 km/h). Although Depression -era economics cut into sales, the design was highly successful in service, lasting into the 1980s. In 1925, the recently-formed Pullman Car & Manufacturing Corporation experimented with lightweight self-propelled railcars in co-operation with
6063-413: The 1936 model year. Northwest Airlines ' promotional materials from the late 1930s referred to their fleet of airliners as "Sky Zephyrs." If advertisers could find a way to cash in on Zephyr-mania, they did. While a revolutionary design, the Pioneer Zephyr was not the first streamliner—that title went to the M-10000 of the Union Pacific Railroad , which made its first trip in February 1934. However,
6192-485: The BNSF Northern Transcon : The Morning and Afternoon Zephyr trains were limited stop runs. Because some stations were not in central downtown areas, connecting "Burlington Bus" service was provided at East Dubuque, Illinois, for Dubuque, Iowa ; North La Crosse for La Crosse, Wisconsin , and Winona Junction, Wisconsin , for Winona, Minnesota . In 1947, the Morning and Afternoon Zephyrs left Chicago at 9:00 a.m. and 4:00 p.m., respectively. The times varied during
6321-421: The Budd Company just a (much) more powerful engine away from producing a history-making streamlined trainset. The Great Depression caused a catastrophic loss of business for the rail industry as a whole and for manufacturers of motorized railcars whose primary markets, branch line services, were among the first to be cut. The interests of lightweight equipment manufacturers and rail operators therefore focused on
6450-507: The Burlington and put into service over longer routes. Twin-engine power units and eventually booster power units met the trainsets' additional power requirements. The Burlington's four-car Mark Twain Zephyr entered revenue service in October 1935 on the railroad's Saint Louis– Burlington, Iowa , route. Two partially-articulated six-car trainsets entered service in May 1936 on the Burlington's Denver Zephyr route, which connected Chicago and Denver. The Burlington then replaced those sets with
6579-470: The Burlington between 1934 and 1939. Each ran as named trains on various Burlington midwestern routes. The Burlington later renamed the Burlington Zephyr as the Pioneer Zephyr in honor of that train's status as the first of the fleet. In April 1935, two Twin Cities Zephyrs that bore the same three-car configuration entered service on the railroad's Chicago and Minneapolis-St. Paul route. Larger trainsets with more powerful Winton engines were built for
SECTION 50
#17327870171096708-564: The Burlington capitalized on the Zephyr's success. Many of the Burlington's named passenger trains began operating under the Zephyr brand. After the nine original Zephyr sets were completed during 1934–1939, standard production model diesel passenger locomotives with improved engines became available. Trains consisting of the new locomotives with new streamlined cars of standard size were ordered. Burlington ordered its new EMC E5 passenger diesels with matching stainless-steel fluting and operated their new full-size, long-distance trains under
6837-407: The Dutch NS procured five diesel-electric RAm TEE I (Swiss) and NS DE4 (Dutch) trainsets for Zürich - Amsterdam and Amsterdam- Brussels -Paris services. One set was lost in an accident 1971. The remaining four sets operated as TEE trains until 1974, were transferred to Canada for use on the Ontario Northland Railway (ONR) in 1976. The ONR operated three trains on its Toronto – Moosonee line as
6966-429: The Lake Michigan shore, where it arrived for the "Wings of a Century" pageant on opening day. After its showing on the Wings of a Century stage, and one day on public display at the Fair, the train was taken on a 31-state, 222-city publicity tour. More than two million people saw the train before it entered revenue service. Part of this tour included a test run between Chicago and Minneapolis - Saint Paul , completing
7095-459: The New York, New Haven and Hartford Railroad's John Quincy Adams . Both were retired by 1964. In 1956, the Budd Company produced a single streamlined, lightweight, six car DMU trainset that the New York, New Haven and Hartford Railroad operated as the Roger Williams . After a short period of time in high speed service, the train was split up and the cars were used in service with the New Haven's other RDCs . The advent of jet air travel in
7224-423: The Pennsylvania Railroad's class K4 locomotives. In 1937, Otto Kuhler used a variation of the bullet-front design on a 4-6-2 locomotive constructed for the Baltimore & Ohio 's streamlined Royal Blue . Henry Dreyfuss used a similar variation for the J-3a Super Hudsons that pulled the 20th Century Limited and other NYC express trains. In 1937, the Milwaukee Road introduced the class F7 Hudsons on
7353-539: The Pennsylvania Railroad's short-lived T1 class locomotives went out of service in 1952. All of those iconic locomotives were scrapped. The last steam streamliners built were three Norfolk and Western class J locomotives in 1950, which operated until 1959. In 1951, the Interstate Commerce Commission implemented regulations restricting most trains to speeds of 79 mph (127 km/h) or below unless automatic train stop , automatic train control , or cab signalling were installed. The new regulations minimized one of
7482-408: The Pioneer Zephyr was involved in a head-on collision with a freight train that completely destroyed the cab. Five mail clerks were injured and the engineer was killed, and the accident drove home the advantages for crew safety of the elevated, behind-the-nose cab design of the contemporary EMC E-series locomotives. The train was rebuilt and re-entered revenue service soon afterward. Ralph Budd and
7611-427: The US, as an improvement on the heavy, underpowered and shimmy-prone " doodlebugs " that ran on American tracks. In that endeavor, Budd would produce lightweight rail equipment utilizing unibody construction and the high strength alloy stainless steel , enabled by shot welding , a breakthrough in electrical welding technique. The venture produced articulated power-trailer car sets with streamlined styling, which left
7740-445: The USPTO granted US patents 2,256,493 and 2,256,494 to the Budd Company. The streamlining extended to the undercarriage as well to reduce drag. Budd took the task of naming the train very seriously. He wanted a name that started with the letter Z because this train was intended to be the "last word" in passenger service; Budd and his coworkers looked up the last words in their dictionaries, but neither zymurgy nor zyzzle conveyed
7869-433: The United States were McKeen rail motorcars that the company built for the Union Pacific and the Southern Pacific Railroads between 1905 and 1917. Most McKeen cars sported a pointed "wind splitter" front, a rounded rear and round porthole style windows in a style that was as much nautically as aerodynamically inspired. The McKeen cars were unsuccessful because the internal combustion drive technology for that application
SECTION 60
#17327870171097998-399: The advantages of diesel became compelling enough for a growing number of rail lines to select diesel over steam for new passenger equipment. The power and top speed advantages of state-of-the-art steam locomotives were more than offset by diesel's advantages in service flexibility, downtime, maintenance costs and economic efficiency for most operators. The American Locomotive Company (ALCO),
8127-403: The basic elements of car construction that would be used to build a lightweight streamliner train. Stainless steel provided many benefits over traditional wood and hardened steel for railroad carbodies; it was a lighter and stronger material, and its natural silver appearance and resistance to corrosion meant that it would not have to be painted to protect it from the weather. Since the carbody
8256-422: The boiler in shrouding, streamlining of the GS-3/GS-4 series locomotives consisted of skyline casing flush with the smokestack and smoke-lifting skirting along the boiler that left the silver-painted smokebox on full display. The trend of streamliners also came to Japan. In 1934, the Ministry of Railways ( Japanese Government Railways , JGR) decided to convert one of its 3-cylinder steam locomotives class C53 into
8385-489: The builder of the Hiawatha speedsters, saw diesel as the future of passenger service and introduced streamlined locomotives influenced by the design of the E units in 1939 . The replacement of steam with diesel power was interrupted by the US entry into World War II, with a military premium on diesel technology that stopped all production of diesel locomotives for passenger service between September 1942 and January 1945. Streamlined steam locomotives continued to be produced into
8514-479: The converted locomotive. The Japanese government planned to use this one converted streamline locomotive on the passenger express route between Osaka and Nagoya. The converted locomotive gained much popularity from the public. JGR therefore decided to build 21 new streamlined versions of the class C55 locomotive . Additionally, JGR built 3 streamlined class EF55 electric locomotives. Kiha-43000 diesel multiple units and Moha-52 electric multiple units also received
8643-420: The day of the dash, every road grade crossing was staffed by a flagger to stop automobile traffic ahead of the train and to ensure that the crossing was clear. Stations along the route were protected by local police officers and members of the American Legion and the Boy Scouts of America . The train left Denver at 07:04 Central Daylight Time and at 20:09, 13 hours 5 minutes later, broke through
8772-437: The derailment and two passengers and the engineer lost their lives. After a third pair of trains were delivered in 1947, the second pair of trains was reassigned as the Nebraska Zephyrs . The third sets (typically seven cars) were the first dome streamliner trains, after a company-built modified coach dome car was tested starting in 1945. The 1947 sets originally consisted of a baggage-refreshment car, four vista dome coaches,
8901-469: The development of a new generation of lightweight, high speed, internal combustion-electric powered streamlined trainsets that were primarily designed for mainline service. The Chicago, Burlington & Quincy Railroad (Burlington) and the Union Pacific sought to increase the efficiency of their passenger services by looking to the lightweight, petroleum-powered technology that Budd and Pullman-Standard were developing. The Union Pacific named its project
9030-541: The earlier EMC 1800 hp B-B development design locomotives, the twin-engine format and multiple-unit control systems that facilitated cab/booster locomotive sets. The E-units brought sufficient power for full-sized trains such as the B&O Capitol Limited , the Atchison, Topeka and Santa Fe Railway 's (AT&SF's) Super Chief , and the Union Pacific's upgraded City of Los Angeles and City of San Francisco , which challenged steam power in all aspects of passenger service. EMC introduced standardized production to
9159-420: The early postwar era. Among the most distinctive were the Pennsylvania Railroad's duplex-drive 6-4-4-6 type S1 and 4-4-4-4 type T1 locomotives that Raymond Loewy styled. In terms of service longevity, the most successful were the Southern Pacific GS-3 Daylight locomotives introduced in 1938 and the Norfolk and Western class J locomotives introduced in 1941. In contrast to designs that completely encased
9288-524: The entire train. Budd was familiar with the development of stationary diesel engines, and believed their superior reliability and fuel economy could be an asset for train transport as well. He brought his idea to the Winton Engine Company (a General Motors subsidiary), and together they designed and produced a new 660 horsepower (490 kW) engine small enough to fit inside a train, solving the question of propulsion. The exterior design of
9417-515: The fair ended on October 2, 1949. The fourth car that was added in 1935 was removed in May 1950. By 1955 the Pioneer Zephyr 's route had been updated to run between Galesburg, Illinois , and Saint Joseph, Missouri ; the trainset had been in continual service since 1934, operating over nearly 3 million miles (4.8 million kilometres). The Pioneer Zephyr 's last revenue run was a trip from Lincoln , Nebraska , to Kansas City , Missouri , (along
9546-738: The first of several Zephyr trainsets built for Burlington, the original trainset was renamed the Pioneer Zephyr once additional named trainsets entered service. After its naming in Philadelphia, the train was taken on a three-week promotional tour of cities in the Northeast and Midwest . The train was open for viewing in several cities, with 24,000 people viewing it in Philadelphia, 50,000 in Rochester, New York, and more than 109,000 viewing it in New York City. In early May 1934,
9675-478: The front of the power car. Behind the engine in the power car was a 19-foot long (5.8 m) storage-mail compartment. The second car, measuring 57 feet 8 inches (17.6 m) long, was a combination 30 ft (9.1 m) long express, checked baggage and railway post office section, followed by a short buffet and 20-passenger coach section. The third and final car in the train, measuring 63 feet 6 inches (19.35 m) long as originally built,
9804-472: The full California Zephyr in 1983. Press publicity had apparently first coined the term "Silver Streak". The Pioneer Zephyr' s famous Denver-Chicago dash served as the inspiration for the 1934 film The Silver Streak starring Charles Starrett . In that story, the crew was racing to the Boulder Dam construction site with an iron lung , with only moments to spare. The original Zephyr trainset
9933-854: The heyday of the Burlington's Zephyr service. The Silver Charger , power car of the General Pershing Zephyr , is on display at the National Museum of Transportation in St Louis , and the same train's "diner-parlour and observation car" is now the Silver Star Cafe in Port Hedland , Australia. The Flying Yankee trainset is preserved at the Hobo Railroad in New Hampshire . Also utilizing
10062-778: The key advantages of rail travel over the automobile, which became an increasingly attractive alternative as postwar construction of highway systems progressed. Rail operators marketed their services on the basis of luxurious sightseeing, as airlines increasingly competed with rail lines for long-distance travel. In the mid-1950s, there were several attempts to revive the lightweight custom streamliner concept. None of these projects achieved any lasting impact on passenger service. The Train X project, first promoted by Robert R. Young no later than 1948, resulted in low-profile Baldwin RP-210 locomotives paired with articulated aluminum cars from Pullman-Standard . Two trainsets were built in 1956 for
10191-450: The late 1950s brought forth a new round of price competition from airlines for long-distance travel, severely affecting the ridership and profitability of long-distance passenger rail service. Government regulations forced railroads to continue to operate passenger rail service, even on long routes where, the railroads argued, it was almost impossible to make a profit. Pioneer Zephyr 2 non-motor Jacobs bogies , The Pioneer Zephyr
10320-604: The lightweight carbody construction and raked, rounded front end introduced with the Zephyr and the high-mounted, behind-the-nose cab of the M-1000x locomotives. One of the first, EMC's TA , was a 1,200-horsepower (890 kW) version produced for the Rock Island Rockets , a series of six lightweight, semi-articulated three and four-car trainsets. EMC/EMD manufactured streamlined E-unit diesel-electric locomotives from 1937 to 1963. These incorporated two features of
10449-544: The limitations of the locomotives' technology when meeting the demands of long-distance and higher capacity service. The M-10001 ran for only 32 months as the City of Portland before it was replaced, re-entered service on the Portland–Seattle run and retired in June 1939. Similarly, the M-10002 spent 19 months as the Union Pacific's City of Los Angeles , 39 months as the City of Portland and ten months out of service starting in July 1941. The locomotive then served on
10578-461: The locomotive industry, with its attendant economies of scale and simplified processes for ordering, producing and servicing locomotives. As a result, EMC was able to offer a variety of support services that decreased technological and initial cost barriers that would otherwise deter conversions to diesel-electric power. With power and reliability of new diesel-electric units improved with the 2,000-horsepower (1,500 kW) EMC E3 locomotive in 1938,
10707-507: The meanings that Budd was looking for. While the word "zephyr" had seen previous use , Budd found his inspiration in The Canterbury Tales , which he had been reading. The story begins with pilgrims setting out on a journey, inspired by the budding springtime and by Zephyrus , the gentle and nurturing west wind. Budd thought that would be an excellent name for a sleek new traveling machine— Zephyr . The first Zephyr (9900)
10836-592: The name, the Minnesota Zephyr was a dinner train located in the historic city of Stillwater, Minnesota , although it was not directly associated with the historic Burlington Zephyr fleet. Dorney Park & Wildwater Kingdom in Allentown, Pennsylvania , has a miniature replica train ride called Zephyr which was built in 1935 and helped the park survive the Great Depression. Due to
10965-423: The names City of Portland (June 1935), City of Los Angeles (May 1936), City of San Francisco (June 1936) and City of Denver (June 1936). The M-10001 set had a single power unit that contained a 1,200-horsepower (890 kW) Winton diesel engine. The power unit pulled six tapered low-profile cars that had the form of the original three-car M-10000 trainset. The M-10002 ' s set consisted of
11094-405: The need for couplers between each of the carbodies, further reducing the train's weight. The concept was used by Budd engineer Walter B. Dean to build a train consisting of three semi-permanently attached cars. However, this also meant that individual cars could not be removed from or added to the trainset easily, either to adjust to demand or to make repairs to an individual car without sidelining
11223-447: The operations. All other trains along the Zephyr 's route were diverted to sidings and the turnouts were spiked into the proper alignment for the Zephyr 's run. Track and maintenance of way workers checked every spike and bolt along the train's route to ensure that there would not be any problems, and temporary speed signs were installed along the route to warn the Zephyr 's crew of curves that would be dangerous at high speeds. On
11352-533: The original Zephyr, entered service between Boston and Portland, Maine , on 1 April 1935. The Gulf, Mobile and Northern Railroad Rebel trainsets were similar to the Zephyr in form, but were not articulated. Designed by Otto Kuhler , the ALCO powered diesel-electrics that the American Car and Foundry Company constructed were placed into service on 10 July 1935. While streamlining on steam locomotives
11481-511: The postwar era. The railroad retired the last of its six-car sets in 1968 after using it as the Nebraska Zephyr . On 31 January 1935, the Union Pacific's three-car M-10000 went into service between Kansas City, Missouri , and Salina, Kansas , as The Streamliner . The train subsequently became the City of Salina under the railroad's naming convention for its expanding fleet of diesel-powered streamliners. The Union Pacific operated
11610-416: The problem. The articulated design of some Budd-Michelin cars, with trucks shared between adjacent cars, presented another opportunity for weight saving with the new train. On conventional passenger cars, each carbody rode upon a pair of trucks (pivot-mounted wheel-axle assembly), with one truck at each end. The articulation not only reduced the number of trucks under the train, but it also dispensed with
11739-471: The problems worse. As a result, many of the locomotives had their casings removed. Streamliner locomotives arrived relatively late in Australia. In 1937 streamlined casings were fitted on four Victorian Railways S class locomotives for the Spirit of Progress service between Melbourne and Albury . Similar casings were then fitted on two Tasmanian Government Railways R class narrow-gauge locomotives for
11868-440: The public in March 2021. In addition to the Pioneer Zephyr , several other legacies remain. An operable Nebraska Zephyr train was donated to IRM. There, powered by one of the large "E" series passenger diesels (an EMC E5 ) with the distinctive and durable stainless-steel fluting, it is still operated on short runs on the museum's substantial trackage, providing train enthusiasts and tourists with an experience reminiscent of
11997-464: The railways to provide additional mainline trackage for high speed trains. The first experiments with diesel streamliner services in the United Kingdom were the Blue Pullman trains introduced in 1960 and withdrawn in 1973. These provided 90-mile-per-hour (140 km/h) luxury business services, but were marginally successful and ran only a little faster than mainstream services. The Blue Pullman
12126-540: The route, including Lincoln, Nebraska, where 21,000 people viewed the train. The tour stopped in 46 cities and had almost 485,000 people view the train at its many stops. The train made a "Dawn-to-Dusk" dash from Denver to Chicago on May 26, 1934, in a publicity stunt timed to coincide with the opening day of the second year of the Century of Progress world's fair in Chicago. The railroad spared no expense in planning
12255-503: The run it reached a speed of 112.5 mph (181 km/h). The historic dash inspired a 1934 film ( " The Silver Streak " ) and the train's nickname, "The Silver Streak". The train entered regular revenue service on November 11, 1934, between Kansas City , Missouri ; Omaha , Nebraska ; and Lincoln, Nebraska . It operated this and other routes until its retirement in 1960, when it was donated to Chicago's Museum of Science & Industry , where it remains on public display. The train
12384-557: The same distance in around 25 hours. Riding the train were Ralph Budd, Edward G. Budd, Harold L. Hamilton, president of the Electro-Motive Corporation , a number of reporters, some Burlington employees, members of the public, and Zeph, a burro that was contributed by a Colorado newspaper, the Rocky Mountain News , as a mascot for the train. The newspaper had described Zeph to the railroad as
12513-590: The season, with the Morning Zephyr leaving at 8:00 a.m. and the Afternoon Zephyr at 4:30 p.m. from Chicago during the summer, with a 2:30 afternoon departure in the non-summer months. Streamliner A streamliner is a vehicle incorporating streamlining in a shape providing reduced air resistance . The term is applied to high-speed railway trainsets of the 1930s to 1950s, and to their successor " bullet trains ". Less commonly,
12642-541: The second pair of trains was originally shovelnose diesel locomotives 9904 ( Pegasus ) and 9905 ( Zephyrus ) . On its way into Chicago on the evening of April 3, 1947, the "Train of the Goddesses" travelling at 75 miles (121 km) per hour was derailed in Downers Grove, Illinois by a tractor that fell into its path from a freight train on a parallel track. Two of the Zephyr's cars smashed into an unoccupied brick railroad station. Many people were injured in
12771-461: The set in 1950. The visual styling of the new trainsets made the existing fleets of locomotives and railcars suddenly look obsolete. Rail lines soon responded by adding streamlined shrouding and varying degrees of mechanical improvement to older locomotives and re-styling heavyweight cars. The first American steam locomotive to receive that treatment was one of the New York Central Railroad 's (NYC's) J-1 Hudson class locomotives built in 1930, which
12900-580: The speed record that the first DMU "Flying Hamburger" had set 1933 traveling between Hamburg and Berlin. A TGV high-speed test train set a world record for the fastest wheeled train, reaching 575 km/h (357 mph) in 2007. Conventional TGV services operate at up to 322 km/h (200 mph) on the LGV Est , LGV Rhin-Rhône and LGV Méditerranée . The power cars of the TGV Euroduplex (2N2) , which began commercial operations in 2011, have
13029-444: The stainless steel, and unibody construction and articulation to reduce weight. It was the first of nine similarly built trainsets made for Burlington and its technologies were pivotal in the subsequent dieselization of passenger rail service. Its operating economy, speed, and public appeal demonstrated the potential for diesel-electric-powered trains to revitalize and restore profitability to passenger rail service that had suffered
13158-562: The stainless steel. On August 20, 1932, Earl J. Ragsdale , an engineer at the Budd Company, filed a patent application for a "Method and product of electric welding"; on January 16, 1934, the United States Patent & Trademark Office (USPTO) granted US patent 1,944,106 to the Budd Company. Shotwelding , as Ragsdale termed his method, involved automatic control of the timing of individual spot welds . In spot welding,
13287-645: The style of the Pennsylvania Railroad 's T1 . In all cases, the streamlining on Australian steam locomotives were purely aesthetic, with negligible impacts on train speeds. In Europe, the streamliner tradition gained new life after World War II . In Germany, DRG Class SVT 137 trains resumed service, but at slower speeds than before the war. Based on the Kruckenberg SVT 137, the Deutsche Bundesbahn 's (DB's) streamlined diesel-electric Class VT 11.5 (later renamed to DB Class 601) built in 1957
13416-454: The tape at the designated finish line at Halsted Street station , 1.8 miles west of Chicago Union Station . The train's average speed from start to finish was 77 mph (124 km/h); and had reached a speed of 112.5 mph (181 km/h). The non-stop 1,015 mile (1,633 km) trip exceeded the railroad's expectations in being 1 hour 55 minutes faster than was scheduled. The Burlington's contemporary passenger trains plied
13545-555: The term is applied to fully faired upright and recumbent bicycles . As part of the Streamline Moderne trend, the term was applied to passenger cars, trucks, and other types of light-, medium-, or heavy-duty vehicles, but now vehicle streamlining is so prevalent that it is not an outstanding characteristic. In land speed racing , it is a term applied to the long, slender, custom built, high-speed vehicles with enclosed wheels. The earliest known streamlined rail equipment in
13674-568: The test trip in just over six hours, besting the Burlington Route's fastest steam-powered service by five hours and convincing the railroad to promptly place orders with Budd and GM for two more Zephyr trainsets. Even before the Burlington Route's new trainsets could be built, east coast railroads Boston and Maine Railroad and Maine Central Railroad ordered a nearly identical copy of the Pioneer Zephyr from Budd and GM, which began service between Boston and Bangor, Maine , in February 1935 as
13803-571: The timing from Chicago to Saint Paul had relaxed by five to ten minutes, but by 1970, the last full year of service, the journey took seven hours. The Burlington handled five passenger trains each way between Chicago and the Twin Cities, four of them in the daytime: the morning and afternoon Zephyrs and the premier trains of the Burlington's two owners, the North Coast Limited of the Northern Pacific Railroad and
13932-512: The train received a cosmetic restoration by Northern Rail Car in Milwaukee , Wisconsin , the pit was finally ready to receive the train. The Pioneer Zephyr train is now on display at MSI just outside the main entrance from the museum's underground parking area, where it is one of the more popular exhibits. In November 2019, MSI temporarily closed the exhibit to add new interactive elements and an expanded experience. The exhibit re-opened to
14061-604: The train was driven back westward over the Pennsylvania Railroad 's mainline to Chicago, and some parallel routes, exceeding 100 miles per hour (160 km/h) several times. At its stop in Dayton, Ohio, another 20,000 people viewed the train, and a "never-ending procession of visitors" viewed it on its stop in Indianapolis. It was then driven toward Denver for its last display in preparation for its next big promotion. It made additional promotional stops in other cities along
14190-442: The train was left to aeronautical engineer Albert Gardner Dean (Walter Dean's younger brother) who designed the sloping nose shape, with architects Paul Philippe Cret and John Harbeson , devising a way to strengthen and beautify the sides with the train's horizontal fluting. On April 15, 1936, Colonel Ragsdale, Walter Dean and Albert Dean, filed patent applications for a "Rail Car Front End Construction". On September 23, 1941
14319-410: The train's famous dash, the original Burlington Zephyr was renamed the Pioneer Zephyr to distinguish it as the first of the Burlington's growing Zephyr fleet. In 1938, car 525 was replaced by car number 500, a 40-seat buffet/lounge car, to provide light meals. Car number 505, the baggage-coach combine , was rebuilt at this time into a full baggage car , but it kept its original windows. In 1939
14448-715: The train's regular revenue route) that then continued to Chicago on March 20, 1960. The California Zephyr made its last runs as a full service between California and Chicago in 1970 following the Western Pacific Railroad 's withdrawal, with the Rio Grande and Burlington Route successor Burlington Northern Railroad designating successor trains for their portions of the route under the names Rio Grande Zephyr and California Zephyr Service respectively. Government-formed Amtrak took over most passenger rail services in 1971, and finally succeeded in reviving
14577-445: The two pieces of metal that are to be joined are pressed together with an electrode on each side of the joint. A very high electric current is passed through the joint and fuses the two pieces of metal together. If a spot weld is heated too long, heat will spread from the weld at a middling temperature that weakens the stainless steel and compromises its corrosion-resistant properties unacceptably; Ragsdale's precisely-timed welds solved
14706-485: The weather, until 1994. At that time, the steam locomotive that shared the display space with the Zephyr , Santa Fe #2903, was donated to the Illinois Railway Museum (IRM) at Union , west of Chicago, while MSI prepared a new display location for the Zephyr . MSI dug a pit in front of the building and built a new display area for the Zephyr , where it could be displayed year-round. In 1998, after
14835-471: The west coast consisted of five runs monthly for each route. The railroad maintained its daily overnight service on the Chicago–Denver run by assigning three locomotive sets for two trains. The railroad then augmented that stable with locomotive equipment taken from other runs. Despite the breakthrough schedule times of the long-distance M-1000x "City" trains, the records of the Union Pacific's fleet reflected
14964-604: Was a five-unit (including power car) articulated trainset for day service. The Pullman-built set had the same power format and 1,200-horsepower (890 kW) Winton diesel engine as M-10001, with some style aspects that resembled the later M1000x trainsets. The Illinois Central ran the 121 trainset on the Green Diamond from May 1936 to 1947. After an overhaul, the railroad placed the set on the Jackson Mississippi–New Orleans run until it retired and scrapped
15093-409: Was completed by the Budd Company on April 9, 1934. The first car, which measured 71 feet 5 inches (21.77 m), contained the cab, engine compartment and a mail storage area. The train's engineer sat in a small compartment in the nose of the train, directly in front of the prime mover . The main generator was mounted to the prime mover and sat between the engineer's and fireman's seats in
15222-409: Was configured as half coach (40-passenger seats) and half observation car (12 passenger seats). As built, the train had 72 seats and could carry 50,000 pounds (22.7 tonnes ) of baggage and express freight. After a series of demonstration runs, the trainset was named the Burlington Zephyr on April 18, 1934, at the Pennsylvania Railroad 's Broad Street Station in Philadelphia, Pennsylvania. As
15351-541: Was followed by research into streamlined trains and tilting trains , the first to enter passenger service, in 1976, being the diesel powered InterCity 125 ( Class 43 ), followed by the electric, tilting, British Rail Class 370 , and Class 91 , in combination offering 125 mph (201 km/h) streamlined train services across the United Kingdom. High-speed service with the electric German ICE 1 (Class 401) began in 1991. The train, which has traveled at speeds of up to 280 km/h (174 mph) in revenue service, broke
15480-468: Was making a round trip a day, leaving each terminal at 8:00 AM CST and returning at 10:59 PM. In 1940 the westbound Twin Zephyr took six hours to travel from Chicago to Saint Paul, a start-to-stop average of 71 miles per hour, which is a faster average speed between endpoints than the Acela 's average speeds in 2016 between Washington and Boston. According the Burlington, both trains had made the run in five and
15609-422: Was more about marketing than performance, newly designed locomotives with state-of-the-art steam technology were able to travel at high speeds. The Milwaukee Road class A Atlantics , built in 1935 to compete with the Twin Cities Zephyr , were the first "steamliners" equipped to back up their styled claim to extra speed. In a 15 May 1935 run by locomotive No. 2 and a dynamometer car, the railroad documented
15738-485: Was much lighter than similar cars, it would be able to carry a higher revenue load for the same cost. In developing the Budd-Michelin railcars, the Budd Company used the formed steel technology in which they were industry pioneers and solved the most difficult problem in using stainless steel for railcar construction: developing a welding technique that would not compromise the strength and corrosion resistance of
15867-462: Was originally a 40-seat coach number 525, but the following June it was switched to Twin Cities service, then back to the Pioneer Zephyr in December. Car 525 remained on the train until June 1938. Just over five years after it was introduced, the Pioneer Zephyr crossed the one million mile mark in regular service on December 29, 1939, near Council Bluffs , Iowa . On the second anniversary of
15996-431: Was placed in regular service between Kansas City , Missouri , Omaha and Lincoln, Nebraska , on November 11, 1934, with the train numbered 21 northbound and 20 southbound. The trainset replaced a pair of steam locomotives and six heavyweight passenger cars , weighing up to eight times as much as the Zephyr . By June 1935, it proved popular enough to add a fourth car, providing additional coach seating. The fourth car
16125-479: Was re-introduced with streamlined shrouding and named the Commodore Vanderbilt in December 1934. The Vanderbilt styling was a one-off design by Carl Kantola. The NYC's next venture in streamlined styling was Henry Dreyfuss ' 1936 full-length exterior and interior design of the railroad's Mercury trainsets. Raymond Loewy also designed in 1936 art-deco shrouding with a bullet-front scheme for
16254-468: Was so inspired by the dawn-to-dusk run that he chose "Zephyrs" as the mascot for the school. In Galesburg, Illinois, which is 162 rail miles from Chicago, the local high school named all its athletic teams the " Galesburg Silver Streaks " in honor of the train. In 1935, the H. N. White Company changed the name of its top-line saxophones to "King Zephyr." Ford introduced the Lincoln-Zephyr with
16383-572: Was unreliable at the time. Further, the lightweight frames dictated by the cars' limited power tended to break. Streamlined rail motorcars would appear again in the early 1930s after the internal combustion-electric propulsion technology that General Electric developed and that the Electro-Motive Company (EMC) promoted became the accepted technology for use rail motorcars in the 1920s. Streetcar builders sought to build electric cars with improved speed for interurban lines through
16512-608: Was used as the " Trans Europ Express (TEE)" for international high-speed trains. From 1965, the DB used the streamlined electric locomotives DB Class 103 with regular trains for high-speed service. From 1973, the DB used the DB Class 403 , a fully streamlined four-unit electric train with tilting technology. In East Germany, the DR Class VT 18.16 [ de ] was built for international express service. The Swiss SBB and
16641-610: Was used for the exterior shots in the film, while interior scenes were filmed on a soundstage in Hollywood . For the film, the "Burlington Route" nameplate on the train's nose was replaced with one that read "Silver Streak". With Zephyr-mania sweeping the country, tributes turned up in the names of everything from sports teams to commercial products. In 1934, Father Becker, principal of the St. Mary Catholic High School in Menasha, Wisconsin,
#108891