Misplaced Pages

#810189

86-593: Shaft sinking is one of the most difficult of all mining development methods: restricted space, gravity, groundwater and specialized procedures make the task quite formidable. Shafts may be sunk by conventional drill and blast or mechanised means. Historically, mine shaft sinking has been among the most dangerous of all the mining occupations and the preserve of mining contractors called sinkers . Today shaft sinking contractors are concentrated in Canada , Germany , China and South Africa . The modern shaft sinking industry

172-516: A laboratory or factory. Ores recovered by mining include metals , coal , oil shale , gemstones , limestone , chalk , dimension stone , rock salt , potash , gravel , and clay . The ore must be a rock or mineral that contains valuable constituent, can be extracted or mined and sold for profit. Mining in a wider sense includes extraction of any non-renewable resource such as petroleum , natural gas , or even water . Modern mining processes involve prospecting for ore bodies, analysis of

258-417: A depth of 2991 meters. Along with its twin ventilation shafts, it took ten years to sink and equip. The most visible feature of a traditionally-built mine shaft is the headframe (or winding tower, poppet head or pit head) which stands above the shaft. Depending on the type of hoist (or winder) used, the top of the headframe will either house a hoist motor or a sheave wheel (with the hoist motor mounted on

344-636: A hopper and a shaking screen or trommel which frees the desired minerals from the waste gravel. The minerals are then concentrated using sluices or jigs. Large drills are used to sink shafts, excavate stopes, and obtain samples for analysis. Trams are used to transport miners, minerals and waste. Lifts carry miners into and out of mines, and move rock and ore out, and machinery in and out, of underground mines. Huge trucks, shovels and cranes are employed in surface mining to move large quantities of overburden and ore. Processing plants use large crushers, mills, reactors, roasters and other equipment to consolidate

430-883: A mass of actual rock. Both types of ore deposit, placer or lode, are mined by both surface and underground methods. Some mining, including much of the rare earth elements and uranium mining , is done by less-common methods, such as in-situ leaching : this technique involves digging neither at the surface nor underground. The extraction of target minerals by this technique requires that they be soluble, e.g., potash , potassium chloride , sodium chloride , sodium sulfate , which dissolve in water. Some minerals, such as copper minerals and uranium oxide , require acid or carbonate solutions to dissolve. Explosives in Mining Explosives have been used in surface mining and sub-surface mining to blast out rock and ore intended for processing. The most common explosive used in mining

516-426: A mining operation. Once the analysis determines a given ore body is worth recovering, development begins to create access to the ore body. The mine buildings and processing plants are built, and any necessary equipment is obtained. The operation of the mine to recover the ore begins and continues as long as the company operating the mine finds it economical to do so. Once all the ore that the mine can produce profitably

602-503: A more sustainable future, the demand for metals is set to skyrocket. Between 2022 and 2050, an estimated 7 billion metric tons of metals will need to be extracted. Steel will account for the largest portion of this total at 5 billion tons, followed by aluminum at 950 million tons, copper at 650 million tons, graphite at 170 million tons, nickel at 100 million tons, and other metals. Notably, the energy expenditure required to extract these metals will soon surpass that of coal mining, highlighting

688-763: A negative environmental impact, both during the mining activity and after the mine has closed. Hence, most of the world's nations have passed regulations to decrease the impact; however, the outsized role of mining in generating business for often rural, remote or economically depressed communities means that governments often fail to fully enforce such regulations. Work safety has long been a concern as well, and where enforced, modern practices have significantly improved safety in mines. Unregulated, poorly regulated or illegal mining , especially in developing economies , frequently contributes to local human rights violations and environmental conflicts . Mining can also perpetuate political instability through resource conflicts . Since

774-403: A shaft project to follow a learning curve as the project team repeats the same series of activities over and over in what is called "the sinking cycle", eventually approaching the theoretical maximum rate for that sinking set up over time. The use of experienced shaft sinkers is necessary to reduce the length of this learning curve and thus the duration of the project as much as possible. Key to

860-437: A sinking shaft is known as the "shaft bottom". Shaft projects differ from some other forms of mine development in that all activities that take place on the shaft bottom become part of the critical path for the project schedule. The infrastructure required to sink a shaft is referred to as "the sinking set-up". It is typical for progress (the "sinking rate") in the sinking phase (that is excavation, ground support and lining) of

946-408: A strong inducement to extract these metals or to lease the deposits and collect royalties from mine operators. English, German , and Dutch capital combined to finance extraction and refining . Hundreds of German technicians and skilled workers were brought over; in 1642 a colony of 4,000 foreigners was mining and smelting copper at Keswick in the northwestern mountains. Use of water power in

SECTION 10

#1732772578811

1032-400: A successful shaft sinking project are: Although significant emphasis is placed on the rate of progress of a project sinking cycle by shaft sinkers, sinking is only one of a number of phases in the conventional construction of a new shaft, as follows; As with the depth and design of shafts, significant variations may exist in this sequence depending on local conditions. For example, shafts in

1118-651: Is ammonium nitrate . Between 1870 and 1920, in Queensland Australia, an increase in mining accidents lead to more safety measures surrounding the use of explosives for mining. In the United States of America, between 1990 and 1999, about 22.3 billion kilograms of explosives were used in mining quarrying and other industries; Moreover " coal mining used 66.4%, nonmetal mining and quarrying 13.5%, metal mining 10.4%, construction 7.1%, and all other users 2.6%". Artisanal and small-scale mining (ASM)

1204-811: Is a blanket term for a type of subsistence mining involving a miner who may or may not be officially employed by a mining company but works independently, mining minerals using their own resources, usually by hand. While there is no completely coherent definition for ASM, artisanal mining generally includes miners who are not officially employed by a mining company and use their own resources to mine. As such, they are part of an informal economy . ASM also includes, in small-scale mining, enterprises or individuals that employ workers for mining, but who generally still use similar manually-intensive methods as artisanal miners (such as working with hand tools). In addition, ASM can be characterized as distinct from large-scale mining (LSM) by less efficient extraction of pure minerals from

1290-462: Is among the most physically challenging parts of the shaft sinking cycle as bolts must be installed using pneumatic powered rock drills. For this reason, and to minimise the number of persons on the shaft bottom a number of projects have successfully switched to shotcrete for this temporary lining. Research and development in this area is focusing on the robotic application of shotcrete and the commercialisation of thin sprayed polymer liners. Where

1376-476: Is done by removing surface vegetation, dirt, and bedrock to reach buried ore deposits. Techniques of surface mining include: open-pit mining , which is the recovery of materials from an open pit in the ground; quarrying , identical to open-pit mining except that it refers to sand, stone and clay; strip mining , which consists of stripping surface layers off to reveal ore underneath; and mountaintop removal , commonly associated with coal mining, which involves taking

1462-479: Is first and foremost a safety feature preventing loose or unstable rock from falling into the shaft, then a place for shaft sets to bolt into, and lastly a smooth surface to minimise resistance to airflow for ventilation. Final choice of shaft lining is dependent on the geology of the rock which the shaft passes through, some shafts have several liners sections as required Where shafts are sunk in very competent rock there may be no requirement for lining at all, or just

1548-502: Is gradually shifting further towards greater mechanisation. Recent innovations in the form of full-face shaft boring (akin to a vertical tunnel boring machine ) have shown promise but the use of this method is, as of 2019, not widespread. Mine shafts are vertical or near-vertical tunnels , which are "sunk" as a means of accessing an underground ore body, during the development of an underground mine. The shape (in plan view ), dimensions and depth of mine shafts vary greatly in response to

1634-613: Is mining upward, creating a sloping underground room, long wall mining , which is grinding a long ore surface underground, and room and pillar mining, which is removing ore from rooms while leaving pillars in place to support the roof of the room. Room and pillar mining often leads to retreat mining , in which supporting pillars are removed as miners retreat, allowing the room to cave in, thereby loosening more ore. Additional sub-surface mining methods include hard rock mining , bore hole mining, drift and fill mining, long hole slope mining, sub level caving, and block caving . Heavy machinery

1720-484: Is much more common, and produces, for example, 85% of minerals (excluding petroleum and natural gas) in the United States, including 98% of metallic ores. Targets are divided into two general categories of materials: placer deposits , consisting of valuable minerals contained within river gravels, beach sands, and other unconsolidated materials ; and lode deposits , where valuable minerals are found in veins, in layers, or in mineral grains generally distributed throughout

1806-413: Is not of immediate interest to the miner. The total movement of ore and waste constitutes the mining process. Often more waste than ore is mined during the life of a mine, depending on the nature and location of the ore body. Waste removal and placement is a major cost to the mining operator, so a detailed characterization of the waste material forms an essential part of the geological exploration program for

SECTION 20

#1732772578811

1892-584: Is recovered, reclamation can begin, to make the land used by the mine suitable for future use. Technical and economic challenges notwithstanding, successful mine development must also address human factors. Working conditions are paramount to success, especially with regard to exposures to dusts, radiation, noise, explosives hazards, and vibration, as well as illumination standards. Mining today increasingly must address environmental and community impacts, including psychological and sociological dimensions. Thus, mining educator Frank T. M. White (1909–1971), broadened

1978-656: Is the largest producer of diamonds in Africa, with an estimated 12 million carats in 2019. Other types of mining reserves in Africa include cobalt , bauxite , iron ore , coal, and copper . Gold and coal mining started in Australia and New Zealand in the 19th century. Nickel has become important in the economy of New Caledonia . In Fiji , in 1934, the Emperor Gold Mining Company Ltd. established operations at Vatukoula , followed in 1935 by

2064-423: Is to conduct a feasibility study to evaluate the financial viability, the technical and financial risks, and the robustness of the project. This is when the mining company makes the decision whether to develop the mine or to walk away from the project. This includes mine planning to evaluate the economically recoverable portion of the deposit, the metallurgy and ore recoverability, marketability and payability of

2150-426: Is typically used for the mine cage , a conveyance used for moving workers and supplies below the surface, which is suspended from the hoist on steel wire rope. It functions in a similar manner to an elevator . Cages may be single-, double-, or rarely triple-deck, always having multiple redundant safety systems in case of unexpected failure. The second compartment is used for one or more skips , used to hoist ore to

2236-419: Is used in mining to explore and develop sites, to remove and stockpile overburden, to break and remove rocks of various hardness and toughness, to process the ore, and to carry out reclamation projects after the mine is closed. Bulldozers, drills, explosives and trucks are all necessary for excavating the land. In the case of placer mining , unconsolidated gravel, or alluvium , is fed into machinery consisting of

2322-565: The Canadian Shield generally do not need a deep and complex shaft collar since the bedrock is both strong and close to the surface. This reduces the amount of time required to establish the shaft collar. Traditionally, sinking contractors would build a temporary headframe for the sinking set-up, which would then be dismantled to make way for a permanent headframe. With the growth in complexity and duration of shaft sinking projects over time it has become more common to incorporate more of

2408-521: The Greek author Diodorus Siculus , who mentions fire-setting as one method used to break down the hard rock holding the gold . One of the complexes is shown in one of the earliest known mining maps. The miners crushed the ore and ground it to a fine powder before washing the powder for the gold dust known as the dry and wet attachment processes. Mining in Europe has a very long history. Examples include

2494-517: The argentiferous galena in the mines of Cartagena ( Cartago Nova ), Linares ( Castulo ), Plasenzuela and Azuaga , among many others. Spain was one of the most important mining regions, but all regions of the Roman Empire were exploited. In Great Britain the natives had mined minerals for millennia , but after the Roman conquest , the scale of the operations increased dramatically, as

2580-836: The greenstone of the Langdale axe industry based in the English Lake District . The oldest-known mine on archaeological record is the Ngwenya Mine in Eswatini (Swaziland) , which radiocarbon dating shows to be about 43,000 years old. At this site Paleolithic humans mined hematite to make the red pigment ochre . Mines of a similar age in Hungary are believed to be sites where Neanderthals may have mined flint for weapons and tools. Ancient Egyptians mined malachite at Maadi . At first, Egyptians used

2666-509: The 21st century begins, a globalized mining industry of large multinational corporations has arisen. Peak minerals and environmental impacts have also become a concern. Different elements, particularly rare-earth minerals , have begun to increase in demand as a result of new technologies. In 2023, 8.5 billion metric tons of coal were extracted from the Earth's crust. However, as the global economy transitions away from fossil fuels and toward

Shaft sinking - Misplaced Pages Continue

2752-680: The 7th century to the 14th century. Gold was often traded to Mediterranean economies that demanded gold and could supply salt , even though much of Africa was abundant with salt due to the mines and resources in the Sahara desert . The trading of gold for salt was mostly used to promote trade between the different economies. Since the Great Trek in the 19th century, after, gold and diamond mining in Southern Africa has had major political and economic impacts. The Democratic Republic of Congo

2838-675: The French crown to operate mines in 1733, becoming "the first practical miner on Lake Superior"; seven years later, mining was halted by an outbreak between Sioux and Chippewa tribes. Mining in the United States became widespread in the 19th century, and the United States Congress passed the General Mining Act of 1872 to encourage mining of federal lands. As with the California Gold Rush in

2924-643: The Loloma Gold Mines, N.L., and then by Fiji Mines Development Ltd. (aka Dolphin Mines Ltd.). These developments ushered in a “mining boom”, with gold production rising more than a hundred-fold, from 931.4 oz in 1934 to 107,788.5 oz in 1939, an order of magnitude then comparable to the combined output of New Zealand and Australia's eastern states. During prehistoric times, early Americans mined large amounts of copper along Lake Superior 's Keweenaw Peninsula and in nearby Isle Royale ; metallic copper

3010-481: The Romans needed Britannia 's resources, especially gold , silver , tin , and lead . Roman techniques were not limited to surface mining. They followed the ore veins underground once opencast mining was no longer feasible. At Dolaucothi they stoped out the veins and drove adits through bare rock to drain the stopes. The same adits were also used to ventilate the workings, especially important when fire-setting

3096-598: The Spanish to pulverize ore after being mined. This device was powered by animals and used the same principles used for grain threshing . Much of the knowledge of medieval mining techniques comes from books such as Biringuccio 's De la pirotechnia and probably most importantly from Georg Agricola 's De re metallica (1556). These books detail many different mining methods used in German and Saxon mines. A prime issue in medieval mines, which Agricola explains in detail,

3182-756: The Umm el-Sawwan site; gypsum was used to make funerary items for private tombs. Other minerals mined in Egypt from the Old Kingdom (2649-2134 BC) until the Roman Period (30 BC-AD 395) including granite , sandstone , limestone , basalt , travertine , gneiss , galena , and amethyst . Mining in Egypt occurred in the earliest dynasties. The gold mines of Nubia were among the largest and most extensive of any in Ancient Egypt. These mines are described by

3268-624: The beginning of civilization, people have used stone , clay and, later, metals found close to the Earth's surface. These were used to make early tools and weapons; for example, high quality flint found in northern France , southern England and Poland was used to create flint tools . Flint mines have been found in chalk areas where seams of the stone were followed underground by shafts and galleries. The mines at Grimes Graves and Krzemionki are especially famous, and like most other flint mines, are Neolithic in origin (c. 4000–3000 BC). Other hard rocks mined or collected for axes included

3354-405: The bottom of the shaft during sinking, but lags behind by a fixed distance. This distance is determined by the methodology of excavation and the design thickness of the permanent liner. To ensure the safety of persons working on the shaft bottom temporary ground support is installed, usually consisting of welded mesh and rock bolts . The installation of the temporary ground support (called bolting )

3440-528: The bright green malachite stones for ornamentations and pottery . Later, between 2613 and 2494 BC, large building projects required expeditions abroad to the area of Wadi Maghareh in order to secure minerals and other resources not available in Egypt itself. Quarries for turquoise and copper were also found at Wadi Hammamat , Tura , Aswan and various other Nubian sites on the Sinai Peninsula and at Timna . Quarries for gypsum were found at

3526-417: The cutter-head is progressively launched further into the coal seam. High wall mining can produce thousands of tons of coal in contour-strip operations with narrow benches, previously mined areas, trench mine applications and steep-dip seams. Sub-surface mining consists of digging tunnels or shafts into the earth to reach buried ore deposits. Ore, for processing, and waste rock, for disposal, are brought to

Shaft sinking - Misplaced Pages Continue

3612-698: The focus to the “total environment of mining”, including reference to community development around mining, and how mining is portrayed to an urban society, which depends on the industry, although seemingly unaware of this dependency. He stated, “[I]n the past, mining engineers have not been called upon to study the psychological, sociological and personal problems of their own industry – aspects that nowadays are assuming tremendous importance. The mining engineer must rapidly expand his knowledge and his influence into these newer fields.” Mining techniques can be divided into two common excavation types: surface mining and sub-surface (underground) mining . Today, surface mining

3698-487: The form of water mills was extensive. The water mills were employed in crushing ore, raising ore from shafts, and ventilating galleries by powering giant bellows . Black powder was first used in mining in Selmecbánya , Kingdom of Hungary (now Banská Štiavnica , Slovakia) in 1627. Black powder allowed blasting of rock and earth to loosen and reveal ore veins. Blasting was much faster than fire-setting and allowed

3784-591: The ground). The headframe will also typically contain bins for storing ore being transferred to the processing facility. At ground level beneath and around the headframe is the Shaft Collar (also called the Bank or Deck), which provides the foundation necessary to support the weight of the headframe and provides a means for workers, materials and services to enter and exit the shaft. Collars are usually massive reinforced concrete structures with more than one level. If

3870-400: The growing importance of sustainable metal extraction practices. The process of mining from discovery of an ore body through extraction of minerals and finally to returning the land to its natural state consists of several distinct steps. The first is discovery of the ore body, which is carried out through prospecting or exploration to find and then define the extent, location and value of

3956-438: The guides in a similar way to how a steel roller coaster runs on its rails, both having wheels which keep them securely in place. Some shafts do not use guide beams but instead utilize steel wire rope (called guide rope ) kept in tension by massive weights at shaft bottom called cheese weights (because of their resemblance to a truckle or wheel of cheese) as these are easier to maintain and replace. The largest compartment

4042-560: The horizontal), although most modern mine shafts are vertical. If access exists at the bottom of the proposed shaft, and ground conditions allow, then raise boring may be used to excavate the shaft from the bottom up; such shafts are called borehole shafts . Following the Hartley Colliery disaster where the single shaft at the mine became blocked, the United Kingdom made single shaft mines illegal in 1862, establishing

4128-619: The installation of welded mesh and rock bolts . The material of choice for shaft lining is mass concrete which is poured behind shaft forms in lifts of 6 m as the shaft advances (gets deeper). Shotcrete , fibrecrete, brick , cast iron tubing, and precast concrete segments have all been used at one time or another. Additionally, the use of materials like bitumen and even squash balls have been required by specific circumstances. In extreme cases, particularly when sinking through halite , composite liners consisting of two or more materials may be required. The shaft liner does not reach right to

4214-535: The metals due to the difficulties of transporting them, but the copper was eventually traded throughout the continent along major river routes. In the early colonial history of the Americas, "native gold and silver was quickly expropriated and sent back to Spain in fleets of gold- and silver-laden galleons", the gold and silver originating mostly from mines in Central and South America. Turquoise dated at 700 AD

4300-768: The mid-19th century, mining for minerals and precious metals, along with ranching , became a driving factor in the U.S. Westward Expansion to the Pacific coast. With the exploration of the West, mining camps sprang up and "expressed a distinctive spirit, an enduring legacy to the new nation"; Gold Rushers would experience the same problems as the Land Rushers of the transient West that preceded them. Aided by railroads, many people traveled West for work opportunities in mining. Western cities such as Denver and Sacramento originated as mining towns. When new areas were explored, it

4386-497: The mid-sixteenth century. On the continent, mineral deposits belonged to the crown, and this regalian right was stoutly maintained. But in England, royal mining rights were restricted to gold and silver (of which England had virtually no deposits) by a judicial decision of 1568 and a law in 1688. England had iron , zinc , copper , lead , and tin ores. Landlords who owned the base metals and coal under their estates then had

SECTION 50

#1732772578811

4472-432: The minehead, where the water was stored in large reservoirs and tanks. When a full tank was opened, the flood of water sluiced away the overburden to expose the bedrock underneath and any gold-bearing veins. The rock was then worked by fire-setting to heat the rock, which would be quenched with a stream of water. The resulting thermal shock cracked the rock, enabling it to be removed by further streams of water from

4558-431: The mining of previously impenetrable metals and ores. In 1762, one of the world's first mining academies was established in the same town there. The widespread adoption of agricultural innovations such as the iron plowshare , as well as the growing use of metal as a building material, was also a driving force in the tremendous growth of the iron industry during this period. Inventions like the arrastra were often used by

4644-420: The movement of: When the top of the excavation is the ground surface, it is referred to as a shaft ; when the top of the excavation is underground, it is called a winze or a sub-shaft . Small shafts may be excavated upwards from within an existing mine as long as there is access at the bottom, in which case they are called raises . A shaft may be either vertical or inclined (between 80 and 90 degrees to

4730-405: The ore body. This leads to a mathematical resource estimation to estimate the size and grade of the deposit. This estimation is used to conduct a pre-feasibility study to determine the theoretical economics of the ore deposit. This identifies, early on, whether further investment in estimation and engineering studies is warranted and identifies key risks and areas for further work. The next step

4816-462: The ore concentrates, engineering concerns, milling and infrastructure costs, finance and equity requirements, and an analysis of the proposed mine from the initial excavation all the way through to reclamation. The proportion of a deposit that is economically recoverable is dependent on the enrichment factor of the ore in the area. To gain access to the mineral deposit within an area it is often necessary to mine through or remove waste material which

4902-442: The ore, lower wages, decreased occupational safety, benefits, and health standards for miners, and a lack of environmental protection measures. Artisanal miners often undertake the activity of mining seasonally. For example, crops are planted in the rainy season , and mining is pursued in the dry season . However, they also frequently travel to mining areas and work year-round. There are four broad types of ASM: Surface mining

4988-570: The overhead tanks. The Roman miners used similar methods to work cassiterite deposits in Cornwall and lead ore in the Pennines . Sluicing methods were developed by the Romans in Spain in 25 AD to exploit large alluvial gold deposits, the largest site being at Las Medulas , where seven long aqueducts tapped local rivers and sluiced the deposits. The Romans also exploited the silver present in

5074-422: The permanent shaft set-up into the sinking phase. This results in a reduced overall project duration, as for example, if the service piping used to sink the shaft does not need to be stripped out to make way for permanent piping. With the advancements made in raise boring technology, raise borers have been used to create a pilot hole for shaft sinking, where access exists at the bottom of the new shaft, in this case

5160-509: The practice that all underground mines must have a " a second means of egress ". Many other global mining jurisdictions have adopted this rule and shafts are therefore often found in pairs (although there are multiple alternative methods of providing a second means of egress). Currently, the deepest continuous single-lift mine shaft in the world is the main shaft at South Deep Mine in South Africa, owned by Gold Fields Limited , which has

5246-430: The profit potential of a proposed mine, extraction of the desired materials, and final reclamation or restoration of the land after the mine is closed. Mining materials are often obtained from ore bodies, lodes , veins , seams , reefs , or placer deposits . The exploitation of these deposits for raw materials is dependent on investment, labor, energy, refining, and transportation cost. Mining operations can create

SECTION 60

#1732772578811

5332-431: The remaining part of a coal seam previously exploited by other surface-mining techniques has too much overburden to be removed but can still be profitably exploited from the side of the artificial cliff made by previous mining. A typical cycle alternates sumping, which undercuts the seam, and shearing, which raises and lowers the cutter-head boom to cut the entire height of the coal seam. As the coal recovery cycle continues,

5418-492: The shaft continues on for some distance; this area is referred to as the shaft bottom . A tunnel called a ramp typically connects the bottom of the shaft with the rest of the mine. This ramp often contains the mine's water handling facility, called the sump , as water will naturally flow to the lowest point in the mine. Many (although not all) shafts are lined following excavation and the installation of temporary ground support . The shaft lining performs several functions; it

5504-424: The shaft is for ventilation . One or more of the compartments discussed above may be used for air intake, while others may be used for exhaust. Where this is the case a steel or concrete wall called a brattice is installed between the two compartments to separate the air flow. At many mines there are one or more complete additional separate auxiliary shafts with separate head gear and cages. The lowest point in

5590-534: The shaft is to be used for hoisting it is frequently split into multiple compartments by shaft sets , these may be made of either timber or steel . Vertical members in a shaft set are called guides , horizontal members are called buntons . For steel shaft guides, the main two options are hollow structural sections and top hat sections. Top hat sections offer a number of advantages over hollow structural sections including simpler installation, improved corrosion resistance and increased stiffness. Mine conveyances run on

5676-425: The shaft is used for mine ventilation , a plenum space or casing is incorporated into the collar to ensure the proper flow of air into and out of the mine. Beneath the collar the part of the shaft which continues into the ground is called the shaft barrel . At locations where the shaft barrel meets horizontal workings there is a shaft station (or inset) which allows men, materials and services to enter and exit

5762-400: The shaft. From the station tunnels (drifts, galleries or levels) extend towards the ore body , sometimes for many kilometers. The lowest shaft station is most often the point where rock leaves the mine levels and is transferred to the shaft, if so a loading pocket is excavated on one side of the shaft at this location to allow transfer facilities to be built. Beneath the lowest shaft station

5848-446: The shafts could no longer be pumped dry with the available technology. Although an increased use of banknotes , credit and copper coins during this period did decrease the value of, and dependence on, precious metals , gold and silver still remained vital to the story of medieval mining. Due to differences in the social structure of society, the increasing extraction of mineral deposits spread from central Europe to England in

5934-567: The silver mines of Laurium , which helped support the Greek city state of Athens . Although they had over 20,000 slaves working them, their technology was essentially identical to their Bronze Age predecessors. At other mines, such as on the island of Thassos , marble was quarried by the Parians after they arrived in the 7th century BC. The marble was shipped away and was later found by archaeologists to have been used in buildings including

6020-464: The sinking phase is dedicated to enlarging this pilot hole to full diameter (a process usually called "slashing"). This methodology can be considerably faster than full face sinking as muck (waste rock) from sinking falls down the pilot hole and is handled using existing mine infrastructure off critical path. Sinker (mining) A sinker in mining in the 19th century was a worker who specialized in creating new vertical mine shafts . The job

6106-462: The specific needs of the mine they are part of and the geology they are sunk through. For example, in North and South America, smaller shafts are designed to be rectangular in plan view with timber supports. Larger shafts are round in plan and are concrete lined. Mine shafts may be used for a variety of purposes, including as a means of escape in the event of an emergency underground and allowing for

6192-474: The surface through the tunnels and shafts. Sub-surface mining can be classified by the type of access shafts used, and the extraction method or the technique used to reach the mineral deposit. Drift mining uses horizontal access tunnels, slope mining uses diagonally sloping access shafts, and shaft mining uses vertical access shafts. Mining in hard and soft rock formations requires different techniques. Other methods include shrinkage stope mining , which

6278-458: The surface. Smaller mining operations use a skip mounted underneath the cage, rather than a separate device, while some large mines have separate shafts for the cage and skips. The third compartment is used for an emergency exit; it may house an auxiliary cage or a system of ladders. An additional compartment houses mine services such as high voltage cables and pipes for transfer of water, compressed air or diesel fuel . A second reason to divide

6364-602: The tomb of Amphipolis. Philip II of Macedon , the father of Alexander the Great , captured the gold mines of Mount Pangeo in 357 BC to fund his military campaigns. He also captured gold mines in Thrace for minting coinage, eventually producing 26 tons per year. However, it was the Romans who developed large-scale mining methods, especially the use of large volumes of water brought to the minehead by numerous aqueducts . The water

6450-448: The top of a mountain off to reach ore deposits at depth. Most placer deposits, because they are shallowly buried, are mined by surface methods. Finally, landfill mining involves sites where landfills are excavated and processed. Landfill mining has been thought of as a long-term solution to methane emissions and local pollution. High wall mining, which evolved from auger mining, is another form of surface mining. In high wall mining,

6536-628: The top slats. Many examples of such devices have been found in old Roman mines and some examples are now preserved in the British Museum and the National Museum of Wales . Mining as an industry underwent dramatic changes in medieval Europe . The mining industry in the early Middle Ages was mainly focused on the extraction of copper and iron . Other precious metals were also used, mainly for gilding or coinage. Initially, many metals were obtained through open-pit mining , and ore

6622-469: The world's gold, followed by the establishment of large mines such as the Mount Morgan Mine , which ran for nearly a hundred years, Broken Hill ore deposit (one of the largest zinc-lead ore deposits), and the iron ore mines at Iron Knob . After declines in production, another boom in mining occurred in the 1960s. In the early 21st century, Australia remains a major world mineral producer. As

6708-474: The world, which was increasingly demanding copper for electrical and household goods. Canada's mining industry grew more slowly than did the United States due to limitations in transportation, capital, and U.S. competition; Ontario was the major producer of the early 20th century with nickel, copper, and gold. Meanwhile, Australia experienced the Australian gold rushes and by the 1850s was producing 40% of

6794-498: Was highly skilled and the workers who did this work were often regarded as an elite workforce. This article about mining is a stub . You can help Misplaced Pages by expanding it . Mining Mining is the extraction of valuable geological materials and minerals from the surface of the Earth . Mining is required to obtain most materials that cannot be grown through agricultural processes , or feasibly created artificially in

6880-628: Was mined in pre-Columbian America; in the Cerillos Mining District in New Mexico , an estimate of "about 15,000 tons of rock had been removed from Mt. Chalchihuitl using stone tools before 1700." In 1727 Louis Denys (Denis) (1675–1741), sieur de La Ronde – brother of Simon-Pierre Denys de Bonaventure and the son-in-law of René Chartier – took command of Fort La Pointe at Chequamegon Bay ; where natives informed him of an island of copper. La Ronde obtained permission from

6966-576: Was primarily extracted from shallow depths, rather than through deep mine shafts. Around the 14th century , the growing use of weapons , armour , stirrups , and horseshoes greatly increased the demand for iron. Medieval knights , for example, were often laden with up to 100 pounds (45 kg) of plate or chain link armour in addition to swords , lances and other weapons. The overwhelming dependency on iron for military purposes spurred iron production and extraction processes. The silver crisis of 1465 occurred when all mines had reached depths at which

7052-406: Was still present near the surface in colonial times. Indigenous peoples used Lake Superior copper from at least 5,000 years ago; copper tools, arrowheads, and other artifacts that were part of an extensive native trade-network have been discovered. In addition, obsidian , flint , and other minerals were mined, worked, and traded. Early French explorers who encountered the sites made no use of

7138-411: Was the removal of water from mining shafts. As miners dug deeper to access new veins, flooding became a very real obstacle. The mining industry became dramatically more efficient and prosperous with the invention of mechanically- and animal-driven pumps. Iron metallurgy in Africa dates back over four thousand years. Gold became an important commodity for Africa during the trans-Saharan gold trade from

7224-403: Was used for a variety of purposes, including removing overburden and rock debris, called hydraulic mining , as well as washing comminuted , or crushed, ores and driving simple machinery. The Romans used hydraulic mining methods on a large scale to prospect for the veins of ore, especially using a now-obsolete form of mining known as hushing . They built numerous aqueducts to supply water to

7310-465: Was used. At other parts of the site, they penetrated the water table and dewatered the mines using several kinds of machines, especially reverse overshot water-wheels . These were used extensively in the copper mines at Rio Tinto in Spain, where one sequence comprised 16 such wheels arranged in pairs, and lifting water about 24 metres (79 ft). They were worked as treadmills with miners standing on

7396-539: Was usually the gold ( placer and then lode ) and then silver that were taken into possession and extracted first. Other metals would often wait for railroads or canals, as coarse gold dust and nuggets do not require smelting and are easy to identify and transport. In the early 20th century, the gold and silver rush to the western United States also stimulated mining for coal as well as base metals such as copper, lead, and iron. Areas in modern Montana, Utah, Arizona, and later Alaska became predominant suppliers of copper to

#810189