An H engine is a piston engine comprising two separate flat engines (complete with separate crankshafts), most often geared to a common output shaft. The name "H engine" is due to the engine blocks resembling a letter "H" when viewed from the front. The most successful "H" engine in this form was the Napier Dagger and its derivatives. The name was also applied to engines of the same basic layout, but rotated through 90 degrees—most famously the Napier Sabre series. A variation on the "H" theme were the Fairey Prince (H-16) & Fairey P.24 Monarch , where the two engines retained separate drives, driving Contra-rotating propellers through separate concentric shafts. Although successful, they only existed in prototype form.
31-491: The Napier Rapier was a British 16-cylinder H pattern air-cooled aero engine designed by Frank Halford and built by Napier & Son shortly before World War II. The Rapier was the first of Napier's H cylinder engines. The rationale for the H is fairly straightforward, in that rather than having an engine with fewer large cylinders, more small cylinders could simply be added. It was believed that an H pattern engine would provide substantially more power and higher RPM's for
62-405: A BRM 16-cylinder H engine, and an 8-cylinder H engine was used for powerboat racing in the 1970s. The benefits of an H engine are the ability to share common parts with the flat engine upon which it is based, and the good engine balance which results in less vibration (which is difficult to achieve in many other types of four-cylinder engines). However, H engines are relatively heavy and have
93-466: A Lotus 43 driven by Jim Clark. It was also used by the unsuccessful 1966 BRM P83 car driven by Graham Hill and Jackie Stewart. As a racing-car engine it was hampered by a high center of gravity , and it was heavy and complex, with gear-driven twin overhead cams for each of four cylinder heads, two gear-coupled crankshafts, and mechanical fuel injection. The Brough Superior Golden Dream motorcycle, first shown in 1938. A 1,000 cc H-4 design and
124-399: A Mitsubishi Heavy Industries TD04HL-15 G -6 in model year -93 and TD04HL-15 T -6 later on. The B204 and B234 are regarded by engine tuners as the preferable engine for performance tuning over the later B205 and B235 engines as the internals are of a higher strength. The later models had lightened internal components to improve efficiency and fuel economy but limit the total power output when
155-447: A 140 hp (103 kW) 2.1-litre naturally aspirated 16 valve version of this engine, with an increased displacement of (2.1 L; 129.3 cu in (2,119 cc)) and a resulting name of B212 . The inlet manifold was enlarged and redesigned for better and greater flow. The intake manifold and the head from the 2.1-litre constitute a well-known replacement for 1985-1993 16 valve, 2.0-litre turbocharged Saabs. Power increase
186-690: A Europe-and-Australia-only option in 1994 non-turbo 900 NGs. This engine is popular among Saab tuners in Sweden (e.g. Trollspeed) due to the lack of balance shafts but with presumably equal strength as the turbo blocks with balance shafts. The B205 and B235 engines are an evolution of the B204 and B234 engines. They were introduced in the 1998 Saab 9-5 giving reduced fuel consumption and emissions with improved refinement. The changes included lightweight internal components:lighter valves, softer valve springs, lighter pistons, and lower-drag oil pump. Another development
217-583: A few units were produced in early 1939. Any development planned was interrupted by World War II and subsequent years of austerity. Wooler built a motorcycle prototype with a similar configuration to the Brough Superior Golden Dream and exhibited it at the British International Motor Show at Earls Court Exhibition Centre in 1948 and again in 1951. This was replaced by a flat-four engined prototype at
248-417: A grey cast iron block and an aluminum head with a single or double overhead chain driven camshafts. SOHC engines use two valves per cylinder and DOHC versions use four valves per cylinder with a pentroof chamber, the valve angle being 22 degrees from vertical. All engines use flat inverted bucket type valve lifters , hydraulic in the case of DOHC engines. The engines were given numbers, for instance B201
279-411: A high centre of gravity. The latter is not only due to the second crankshaft being located near the top of the engine, but also the engine must be high enough off the ground to allow clearance underneath for the exhaust pipes . The U engine layout uses a similar concept, placing two straight engines side-by-side. The British Racing Motors (BRM) H-16 Formula One engine won the 1966 US Grand Prix in
310-669: A naturally aspirated racing engine. A major redesign of the H engine came in 1990 in the form of the new B234 for the Saab 9000 . The B234 featured an increase in stroke from 78 mm (3.07 in) to 90 mm (3.54 in), increasing the displacement to 2.3 liters. With this increased stroke also came a new engine block with increased deck height to make sufficient room for the increased stroke length without being forced to use shorter connecting rods , and in-block counter-rotating balance shafts for reduced vibration ( NVH ). There are two generations of B234 engine, one made from 1990-1993,
341-574: A smaller 1.8 litre displacement version named B185RGA. This version was developed to meet requirement for government vehicle with maximum displacement of 1.8 litres. BAIC continued the development of the Saab H engine. In 2015, a B236R prototype was unveiled at the Shanghai Autoshow. This engine design incorporates variable valve timing and an EGR system which allows the engine to comply with Euro 6 emission standards. The BAIC BJ40L
SECTION 10
#1732793147365372-421: Is a 2.0-litre (20) engine with one camshaft. B201 is the original H engine with two valves per cylinder and a single overhead camshaft. It was introduced in 1981 and unlike the B engine it did not have the central shaft which used to power the distributor, oil- and coolant pump. Instead the distributor is located at the front of the cylinder head and directly driven by the camshaft, while the integrated waterpump
403-484: Is a redesign of the Saab B engine , which in turn was based on the Triumph Slant-4 engine . Despite the name it is not an H engine or horizontally opposed engine , but a slanted inline-4 . The H engine was introduced in 1981 in the Saab 900 and was also used in the Saab 99 from 1982 onwards. H stood for high compression; higher compression was part of the update from B to H engine. It continued in use in
434-529: Is a swap option for Daewoo (now Chevrolet) models of similar age. Note: The primary difference between the B204L and the B204R is with the intercooler , the turbo , the wastegate 'base boost' setting. The B206 is a version of the B204 but without the dual balance shafts and without oil jets under the pistons. It was only offered as a naturally aspirated engine B206I producing 133 hp (99 kW), seemingly
465-490: Is available with a 201 hp (150 kW) engine named B201R and a 231 hp (172 kW) engine named B231R. A 177 hp (132 kW) engine named B205EFA is offered in the Senova X65. The BAIC BJ80 is also available with the 231 hp (172 kW) B231R engine variant. The B201R and B231R models do not use Saab's Trionic engine management system and direct ignition cassette. The H-engine ended production with
496-674: Is displayed in the Uusikaupunki Saab museum . In 1984, Saab added a 16 valve cylinder head with double overhead camshafts . They retroactively renamed the 8-valve version the B201 and used B202 as the name of the new multi-valve unit. Another notable addition to the B202 was hydraulic valve lifters and Ecopower ("ep" in Italy, "(900)S" elsewhere), with a pre-heated catalytic converter for reduced emissions. In 1991, Saab introduced
527-408: Is modest at stock boost but becomes much more evident at higher boost levels. Engine builder John Nicholson also developed a Formula Three engine from the B202, for use in a Reynard 853 chassis. This version one of the first to use Saab's direct ignition system ( SDI ) and produced 165 PS (121 kW) at 5600 rpm. Its other strength was high power in an unusually broad powerband for
558-514: The 1953 show. German firm Konig, who specialised in racing outboard motors, built a few 1000cc H-8s in the 1970s, which were basically two of their VC500 flat fours mounted one above the other, with the direction of rotation reversed on one of them. Each half of the engine was a water cooled 2-stroke with rotating disc valve driven by a toothed belt via two 45/90 degree pulleys, plus two siamesed expansion chamber exhausts, fed by two single choke carbs. Both cylinders at each end of each engine fired at
589-584: The 1st Generation Saab 9-5 in 2009 when the intellectual property was transferred to BAIC . Starting in 2003 with the 9-3 Sport Sedan , Saab began utilizing the L850 engine Ecotec . Beginning in 2010 with the 2nd generation 9-5, all Saabs utilized the Ecotec. There were some technologies carried over into the Ecotec line from the Saab H-engine, but for the most part there is very little similarity between
620-492: The 900/ 9-3 , 9000 , and 9-5 . The 2003 GM Epsilon -based 9-3 switched to the GM Ecotec engine, leaving the 9-5 as the sole user of the H engine. The H family of engine was used in the first-generation 9-5 until it was discontinued in 2010. The tooling and know-how was sold to BAIC . The latter B2X4 and B2X5 engines have in practice nothing in common with the early B engines except cylinder spacing. All versions feature
651-403: The 9000 model. The B234 was selected as one of Ward's 10 Best Engines for 1995 and 1996. The B202 was still being produced in 1993, but for the new generation Saab 900 being released in 1994 a new 2.0L engine was required. This new engine, the B204, was based on the 9000's B234, but in order to make the engine fit in the 900 the engine had to be shortened. This meant that a new chain drive for
SECTION 20
#1732793147365682-403: The camshafts was required to reduce the length of the engine. The B204 engine was available with natural aspiration in 900, 9000 and 9-3 in the form of 2.0i (B204i), with a low pressure turbo in the form of 9000 and 9-3 2.0t (B204E) or Saab 900 and 9-3 2.0T (B204L). B204R was briefly available in the 1999 9-3 Aero (U.S. market 'SE') model. B204 was in production in the Saab 9-3 until 2000, when it
713-642: The engine's software is revised to increase the boost pressures and specific power output. The B204 engine became a very popular engine swap for Vauxhall and Opel Astra, Calibra, Cavalier and Vectras with the GM T-body platform, in Scandinavia in the mid 2000s—the engine uses the same mounting positions due to sharing the same platform. In the UK it is swapped into rotary equipped Mazda RX8, in Ukraine and Russia it
744-402: The other from 1994 to 1998. The later motors had a revised oil sump system, head, timing cover, and different bell housing pattern. Unlike the previous B202, the block was no longer angled, but straight, something that made it unsuitable for the 900 model with its gearbox under the engine, built into the engine oil sump. The longer stroke B234 was last produced in 1998, that being the last year for
775-463: The same frontal area as a large liquid-cooled V engine. The maximum RPM in a dive was 4,800. The H-block has a compact layout, as it essentially consists of two vertically opposed inline engines lying one beside another driving side by side crankshafts. Another advantage is that since the cylinders are opposed, the motion in one is balanced by the opposite motion in the one on the opposite side, leading to very smooth running. The Rapier suffered many of
806-509: The same problems as the later Dagger and Sabre engines. The Fairey Seafox and Short S.20 were both powered by the Napier Rapier. List from Lumsden . Data from Flight and Lumsden . Related development Comparable engines Related lists H engine The H engine is a relatively rare layout, with its main use being in aircraft engines during the 1930s and 1940s. The 1966 Lotus 43 Formula One car used
837-531: The same time, hence the siamesed exhausts for each pair. Subaru has marketed its flat-four and flat-six engines as "H4" and "H6" respectively. The letter "H" in this case refers to "horizontally-opposed", an alternative term for flat engines ; these engines can also be said to look like a "H" or conjoined "H"s, albeit from the top and in schematic form. The Saab H engine is a straight-four engine produced from 1981 to 2009. The letter "H" represents "high compression". Saab H engine The Saab H engine
868-509: The turbo engine also became available, it produces 155 PS (114 kW; 153 hp) at 5500 rpm. Valmet Automotive in Uusikaupunki also planned a downsized 1.6 liter version of B201, to better suit Finnish vehicle tax laws. Downsizing was made by using a narrower cylinder bore. The prototype engine produced 92 PS (68 kW; 91 hp) at 5400 rpm, fitted with Bosch K-Jetronic fuel injection. One such prototype engine
899-512: Was replaced by B205. With the introduction of the OBDII compliant B204 (also coincidental with the introduction of Trionic T5.5 ) Saab embarked on a new concept they termed as "Ecopower" where engines were designed for high power output while also delivering exceptional economy and low environmental impact. Turbocharged engines used Garrett T25 turbochargers and the B234R (9000 Aero manual) used
930-487: Was replaced with a separate unit to the rear of the engine. It was available with 100 PS (74 kW; 99 hp) at 5200 rpm using a single carburettor , 108 PS (79 kW; 107 hp) at 5200 rpm using a dual carburettor, 118 PS (87 kW; 116 hp) at 5500 rpm using Bosch K-Jetronic fuel injection and a turbocharged , fuel injected version with 145 PS (107 kW; 143 hp) at 5000 rpm. In 1986 an intercooled version of
961-589: Was the introduction of the Trionic 7 torque demand type engine management system. Trionic 7 equipped engines have the black direct ignition casing on top of the engine rather than the red of the Trionic 5. BAIC offers the Saab H engine in various configurations on several of its models. The B205RGA and B235RGA, 2.0 and 2.3 litre turbo engines are available similar to those used in Saabs. Further BAIC offers