Space Nation is a Finnish /US company that plans to produce a reality TV -show, the winner of which will be sent to space. The competitors will be selected from users of a game app . Space Nation has built up partnerships with companies in the space industry in the US, Europe and China. It is the first space tourism company to join the United Nations World Tourism Organization (UNWTO) as an affiliate member.
161-493: In April 2018 Space Nation launched a game app for mobile phones, the Space Nation Navigator , which the company calls an astronaut training app. It is developed in partnership with NASA astronaut trainers and includes mini games, quizzes, challenges and a narrative adventure. The app was announced as the first step in the "Space Nation Astronaut Program". Space Nation promises to choose one hundred app users for
322-548: A PADI open water scuba diving course. This scuba course provides basic EVA training at ESA's NBF before moving on to the larger NASA training facility at the Lyndon B. Johnson Space Center . Advanced Training includes a much more in-depth look into the ISS, including learning how to service and operate all systems. Enhanced science training is also implemented at this time to ensure all astronauts can perform science experiments on board
483-1031: A spaceplane to a runway landing, usually to the Shuttle Landing Facility at KSC, Florida, or to Rogers Dry Lake in Edwards Air Force Base , California. If the landing occurred at Edwards, the orbiter was flown back to the KSC atop the Shuttle Carrier Aircraft (SCA), a specially modified Boeing 747 designed to carry the shuttle above it. The first orbiter, Enterprise , was built in 1976 and used in Approach and Landing Tests (ALT), but had no orbital capability. Four fully operational orbiters were initially built: Columbia , Challenger , Discovery , and Atlantis . Of these, two were lost in mission accidents: Challenger in 1986 and Columbia in 2003 , with
644-492: A NASA engineer who had worked to design the Mercury capsule, patented a design for a two-stage fully recoverable system with a straight-winged orbiter mounted on a larger straight-winged booster. The Air Force Flight Dynamics Laboratory argued that a straight-wing design would not be able to withstand the high thermal and aerodynamic stresses during reentry, and would not provide the required cross-range capability. Additionally,
805-816: A Soyuz-type orbital vehicle into low Earth orbit . The training for these astronauts should be based on the lessons learned from training India's only Cosmonaut Wing Commander Rakesh Sharma ( See Salyut-7 1984 ) and through India's international co-operation with NASA and Roscosmos. India may proceed with its human spaceflight program on its own, which would require the Indian Space Research Organisation ( ISRO ) to develop its own training program. India plans to build an astronaut training facility and biomedical engineering centre 8 to 10 kilometres from Kempegowda International Airport. This facility will be used for future astronaut training, as training for India's first crewed mission will take place in
966-497: A crewed spaceflight engineer on both STS-51-C and STS-51-J to serve as a military representative for a National Reconnaissance Office payload. A Space Shuttle crew typically had seven astronauts, with STS-61-A flying with eight. The crew compartment comprised three decks and was the pressurized, habitable area on all Space Shuttle missions. The flight deck consisted of two seats for the commander and pilot, as well as an additional two to four seats for crew members. The mid-deck
1127-404: A crucial role as these missions would last from one year to Moon to three years on Mars. The training required for such missions has to be versatile and easy to learn, adapt, and improvise. A journey to Mars will require astronauts to remain in the crew capsule for nine months. The monotony and isolation of the journey present new psychological challenges. The long period spent in the crew capsule
1288-441: A focus on the psychological aspects of long-duration missions where crew is largely isolated. Currently a six-month mission to the ISS requires up to five years of astronaut training. This level of training is to be expected and likely to be expanded upon for future space exploration missions. It may also include in-flight training aspects. It may be possible that the ISS will be used as a long-duration astronaut training facility in
1449-467: A future reusable shuttle: Class I would have a reusable orbiter mounted on expendable boosters, Class II would use multiple expendable rocket engines and a single propellant tank (stage-and-a-half), and Class III would have both a reusable orbiter and a reusable booster. In September 1969, the Space Task Group, under the leadership of U.S. Vice President Spiro Agnew , issued a report calling for
1610-598: A glider. Its three-part fuselage provided support for the crew compartment, cargo bay, flight surfaces, and engines. The rear of the orbiter contained the Space Shuttle Main Engines (SSME), which provided thrust during launch, as well as the Orbital Maneuvering System (OMS), which allowed the orbiter to achieve, alter, and exit its orbit once in space. Its double- delta wings were 18 m (60 ft) long, and were swept 81° at
1771-497: A graphical rendering program that replicates the ISS and a device called the Charlotte Robot that allows astronauts to visually explore their surroundings while interacting with an object. The Charlotte robot is a simple device with a metal arm attached to the side that allows a user to interact with the device. The user wears haptic feedback gloves with force sensors that send signals to a central computer. In response,
SECTION 10
#17328021360741932-517: A high vacuum, low temperature chamber that simulates the environmental conditions of space. At all stages of training, astronauts undergo physical conditioning, including time in a human centrifuge located at the ACC, and a program of micro gravity flights, carried out in Russia. The Indian human space flight program still awaits a formal go ahead. Once cleared, the mission is expected to take two Indians in
2093-412: A means of training astronauts in a cost-effective manner, particularly for operations such as extra-vehicular activity ( EVA ). These missions are not completely independent without the presence of robots. This opens up a new avenue towards Human-Robot Interaction which has to be thoroughly understood and practised to develop a harmonious relationship between astronauts and robots. These robots would aid
2254-460: A microgravity environment. The Neutral Buoyancy Laboratory (NBL) has advantages in simulating a zero-gravity environment and reproducing the sensation of floating in space. The training method is achieved by constructing a low gravity environment through Maintaining the Natural buoyancy in one of the largest pools in the world. The NBL pool used to practice extravehicular activities or spacewalks
2415-482: A mobile platform for astronauts conducting an EVA. The RMS was built by the Canadian company Spar Aerospace and was controlled by an astronaut inside the orbiter's flight deck using their windows and closed-circuit television. The RMS allowed for six degrees of freedom and had six joints located at three points along the arm. The original RMS could deploy or retrieve payloads up to 29,000 kg (65,000 lb), which
2576-534: A partial-pressure version of the high-altitude pressure suits with a helmet. In 1994, the LES was replaced by the full-pressure Advanced Crew Escape Suit (ACES), which improved the safety of the astronauts in an emergency situation. Columbia originally had modified SR-71 zero-zero ejection seats installed for the ALT and first four missions, but these were disabled after STS-4 and removed after STS-9 . The flight deck
2737-530: A partially reusable system would be the most cost-effective solution. The head of the NASA Office of Manned Space Flight, George Mueller , announced the plan for a reusable shuttle on August 10, 1968. NASA issued a request for proposal (RFP) for designs of the Integral Launch and Reentry Vehicle (ILRV) on October 30, 1968. Rather than award a contract based upon initial proposals, NASA announced
2898-558: A phased approach for the Space Shuttle contracting and development; Phase A was a request for studies completed by competing aerospace companies, Phase B was a competition between two contractors for a specific contract, Phase C involved designing the details of the spacecraft components, and Phase D was the production of the spacecraft. In December 1968, NASA created the Space Shuttle Task Group to determine
3059-481: A port-side hatch that the crew used for entry and exit while on Earth. The airlock is a structure installed to allow movement between two spaces with different gas components, conditions, or pressures. Continuing on the mid-deck structure, each orbiter was originally installed with an internal airlock in the mid-deck. The internal airlock was installed as an external airlock in the payload bay on Discovery , Atlantis , and Endeavour to improve docking with Mir and
3220-629: A real life training camp; twelve of these Candidates will continue to a 10-week astronaut training program. The best performing candidate will become a "Space Nation Astronaut" to get a free trip to space. The company arranged a first "training experience" for social media influencers in May 2018 in North East Iceland in an area where the NASA astronauts trained for the Apollo program before going to
3381-675: A result of an O-ring failing at low temperature, the SRBs were redesigned to provide a constant seal regardless of the ambient temperature. The Space Shuttle's operations were supported by vehicles and infrastructure that facilitated its transportation, construction, and crew access. The crawler-transporters carried the MLP and the Space Shuttle from the VAB to the launch site. The Shuttle Carrier Aircraft (SCA) were two modified Boeing 747s that could carry an orbiter on its back. The original SCA (N905NA)
SECTION 20
#17328021360743542-671: A second orbiter. Later that month, Rockwell began converting STA-099 to OV-099, later named Challenger . On January 29, 1979, NASA ordered two additional orbiters, OV-103 and OV-104, which were named Discovery and Atlantis . Construction of OV-105, later named Endeavour , began in February 1982, but NASA decided to limit the Space Shuttle fleet to four orbiters in 1983. After the loss of Challenger , NASA resumed production of Endeavour in September 1987. After it arrived at Edwards AFB, Enterprise underwent flight testing with
3703-670: A separate central processing unit (CPU) and input/output processor (IOP), and non-volatile solid-state memory . From 1991 to 1993, the orbiter vehicles were upgraded to the AP-101S, which improved the memory and processing capabilities, and reduced the volume and weight of the computers by combining the CPU and IOP into a single unit. Four of the GPCs were loaded with the Primary Avionics Software System (PASS), which
3864-553: A space mission. The mission specific training typically requires 18 months to complete for Space Shuttle and International Space Station crews. It is important to ensure the astronauts’ well-being, physical and mental health prior, during, and after the mission period. Proficiency maintenance aims to help the crew members to maintain a minimum level of performance, including topics such as extravehicular activity, robotics, language, diving, and flight training. The effects of launching and landing have various effects on astronauts, with
4025-650: A spacecraft. It is also used to replace some of the oversized models that cannot fit in the Neutral Buoyancy Lab (NBL). In 1993, astronauts were trained and evaluated on working on the Hubble Space Telescope through a virtual reality training tool, Research in Human Factors Aspects of Enhanced Virtual Environments for EVA Training and Simulation (RAVEN). However, the aim of RAVEN was not to train astronauts but to evaluate
4186-410: A speech. After STS-4, NASA declared its Space Transportation System (STS) operational. The Space Shuttle was the first operational orbital spacecraft designed for reuse . Each Space Shuttle orbiter was designed for a projected lifespan of 100 launches or ten years of operational life, although this was later extended. At launch, it consisted of the orbiter , which contained the crew and payload,
4347-416: A timely manner, with as little intervention from the ground as possible. For missions to the ISS, each astronaut is required to become proficient at one hundred or more experiments. During training, the scientists responsible for the experiments do not have direct contact with the astronauts who will be carrying them out. Instead, scientists instruct trainers who in turn prepare the astronauts for carrying out
4508-802: A total of 135 missions from 1981 to 2011. They launched from the Kennedy Space Center (KSC) in Florida . Operational missions launched numerous satellites , interplanetary probes , and the Hubble Space Telescope (HST), conducted science experiments in orbit, participated in the Shuttle- Mir program with Russia, and participated in the construction and servicing of the International Space Station (ISS). The Space Shuttle fleet's total mission time
4669-466: A total of 14 astronauts killed. A fifth operational (and sixth in total) orbiter, Endeavour , was built in 1991 to replace Challenger . The three surviving operational vehicles were retired from service following Atlantis ' s final flight on July 21, 2011. The U.S. relied on the Russian Soyuz spacecraft to transport astronauts to the ISS from the last Shuttle flight until the launch of
4830-428: A two-part drag parachute system to slow the orbiter after landing. The orbiter used retractable landing gear with a nose landing gear and two main landing gear, each containing two tires. The main landing gear contained two brake assemblies each, and the nose landing gear contained an electro-hydraulic steering mechanism. The Space Shuttle crew varied per mission. They underwent rigorous testing and training to meet
4991-672: A virtual reality environment, is being researched as a solution to behavioral health. Researchers are looking into how current mental health tools can be adjusted to help the crew face stressors that will arise in an isolated, confined environment (ICE) during extended missions. The International Space Station uses a behavioral conflict management system known as the Virtual Space Station (VSS) to minimize conflict between crew members and address psychological challenges. The program has modules that focus on relationship management, stress and depression that guide astronaut's through
Space Nation - Misplaced Pages Continue
5152-471: A virtual therapy session in space. Virtual reality technologies first came to a commercial release in the 1990s. It is not until then did people realize that VR can be used in training astronauts. The earlier VR gears for astronaut training are dedicated to enhance the communication between robot arm operators and the astronaut during Extravehicular Activities (EVA). It brings EVA crew members and robot arm operators together, in live, even when they are on board
5313-404: Is 62 meters (203 feet) long, 31 meters (102 feet) wide, and 12 meters (39 feet) deep, with a capacity of 6.2 million gallons. Underwater head-mounted display virtual reality headset is used to provide visual information during the training with a frame rate of 60 fps and screen resolution of 1280 by 1440. The underwater VR training system has a reduced training cost because of the accessibility of
5474-537: Is a risk for post-flight motion sickness, however this is only significant following long-duration space missions. Post-flight, following exposure to microgravity, the vestibular system , located in the inner ear is disrupted because of the microgravity-induced unresponsiveness of the otoliths which are small calcareous concretions that sense body postures and are responsible for ensuring proper balance. In most cases, this leads to some postflight postural illusions. Cardiovascular events represent important factors during
5635-423: Is carried out in parallel with mission planning. This phase is where candidates will undergo mission specific operational training, as well as experience with their assigned experiments. Crew medical officer training is also included to effectively intervene with proactive and reactive actions in case of medical issues. It can take up to two years for an AsCan to become formally qualified as an astronaut. Usually,
5796-457: Is comparable to other forms of solitary confinement, such as in submarines or Antarctic bases. Being in an isolated and confined environment generates stress, interpersonal conflict, and other behavioral and mental problems. However, natural scenery and communication with loved ones has shown to relax and lessen these effects. A Network of Social Interactions for Bilateral Life Enhancement (ANSIBLE), which provides natural scenery and socialization in
5957-452: Is cooled by 1,080 interior lines carrying liquid hydrogen and is thermally protected by insulative and ablative material. The RS-25 engines had several improvements to enhance reliability and power. During the development program, Rocketdyne determined that the engine was capable of safe reliable operation at 104% of the originally specified thrust. To keep the engine thrust values consistent with previous documentation and software, NASA kept
6118-458: Is done by a consortium of different countries and is a very publicly visible area, astronauts received professional and cultural training, as well as language courses (specifically in Russian ). Following completion of Basic Training candidates proceed to NASA's Advanced Training. AsCans are trained on life-sized models to get a feel of what they will be doing in space. This was done both through
6279-403: Is performed in order to prepare astronauts for events that may pose a hazard to their health, the health of the crew, or the successful completion of the mission. These types of events may be: failure of a critical life support system, capsule depressurization, fire, and other life-threatening events. In addition to the need to train for hazardous events, astronauts will also need to train to ensure
6440-415: Is still largely unknown. However, it is theorized that astronauts on a trip to Mars will likely receive more than 1000x the radiation dosage of a typical person on Earth. As such, present and future training must incorporate systems and processes for protecting astronauts against radiation. Scientific experimentation has historically been an important element of human spaceflight, and is the primary focus of
6601-513: The Columbia disaster . Beginning with STS-114 , the orbiter vehicles were equipped with the wing leading edge impact detection system to alert the crew to any potential damage. The entire underside of the orbiter vehicle, as well as the other hottest surfaces, were protected with tiles of high-temperature reusable surface insulation, made of borosilicate glass -coated silica fibers that trapped heat in air pockets and redirected it out. Areas on
Space Nation - Misplaced Pages Continue
6762-731: The Crew Dragon Demo-2 mission in May 2020. In the late 1930s, the German government launched the " Amerikabomber " project, and Eugen Sanger 's idea, together with mathematician Irene Bredt , was a winged rocket called the Silbervogel (German for "silver bird"). During the 1950s, the United States Air Force proposed using a reusable piloted glider to perform military operations such as reconnaissance, satellite attack, and air-to-ground weapons employment. In
6923-571: The ISS , along with the Orbiter Docking System . The airlock module can be fitted in the mid-bay, or connected to it but in the payload bay. With an internal cylindrical volume of 1.60 metres (5 feet 3 inches) diameter and 2.11 metres (6 feet 11 inches) in length, it can hold two suited astronauts. It has two D-shaped hatchways 1.02 m (40 in) long (diameter), and 0.91 m (36 in) wide. The orbiter
7084-718: The Kibo module will also be carried out at Tsukuba Space Center. Advanced Training is followed by Increment-Specific Training, which, along with any Kibo training, will be carried out at Tsukuba. EVA training for Kibo takes place in the Weightless Environment Test System (WETS). WETS is a Neutral Buoyancy Facility featuring a full-scale mock-up of the Kibo module on the ISS. The Tsukuba Space Center also includes medical facilities for assessing suitability of candidates, an isolation chamber for simulating some of
7245-610: The Martin Marietta X-24B . The program tested aerodynamic characteristics that would later be incorporated in design of the Space Shuttle, including unpowered landing from a high altitude and speed. On September 24, 1966, as the Apollo space program neared its design completion, NASA and the Air Force released a joint study concluding that a new vehicle was required to satisfy their respective future demands and that
7406-470: The Moon in 1967. The company did not announce the carrier for the supposed space flight. As of November 2018, all possible carriers have not yet started with regular commercial space tourism. Under its former name, Cohu Experience Oy, Space Nation had run a successful crowdfunding -campaign in early 2017, which broke Finland 's crowdfunding record at that time. The campaign raised more than 3,2 million Euro,
7567-406: The Moon or Mars –need to carry out multiple tasks and duties, because on such missions the astronauts will need to function largely autonomously, and will need to be proficient in many different areas. For these types of missions, the training to prepare astronauts will likely include training as doctors , scientists , engineers, technicians , pilots , and geologists . In addition there will be
7728-703: The Shenzhou vehicle in nominal and emergency modes. The third and final stage of training is mission specific training, and lasts approximately 10 months. During this phase of training, astronauts are trained in the high fidelity Shenzhou trainer, as well as the Neutral Buoyancy Facility located at the Astronaut Center of China (ACC), in Beijing . As well as time spent in the Neutral Buoyancy Facility (NBF), training for EVA takes place in
7889-553: The Shuttle Carrier Aircraft , a Boeing 747 that had been modified to carry the orbiter. In February 1977, Enterprise began the Approach and Landing Tests (ALT) and underwent captive flights, where it remained attached to the Shuttle Carrier Aircraft for the duration of the flight. On August 12, 1977, Enterprise conducted its first glide test, where it detached from the Shuttle Carrier Aircraft and landed at Edwards AFB. After four additional flights, Enterprise
8050-693: The Simplified Aid For EVA Rescue (SAFER) as simplified aid. The VR training offers a graphical 3-dimensional simulation of the International Space Station (ISS) with a headset, haptic feedback gloves, and motion tracker. In 2018, two Expedition 55 astronauts Richard R. Arnold and Andrew J. Feustel , received virtual reality training and performed the 210th spacewalk. The Virtual Reality Laboratory offers astronauts an immersive VR experience for spacewalks before launching into space. The training process combines
8211-633: The Tracking and Data Relay Satellite System and the Spacecraft Tracking and Data Acquisition Network ground stations to communicate with the orbiter throughout its orbit. Additionally, the orbiter deployed a high-bandwidth K u band radio out of the cargo bay, which could also be utilized as a rendezvous radar. The orbiter was also equipped with two UHF radios for communications with air traffic control and astronauts conducting EVA. The Space Shuttle's fly-by-wire control system
SECTION 50
#17328021360748372-540: The external tank (ET), and the two solid rocket boosters (SRBs). Responsibility for the Space Shuttle components was spread among multiple NASA field centers. The KSC was responsible for launch, landing, and turnaround operations for equatorial orbits (the only orbit profile actually used in the program). The U.S. Air Force at the Vandenberg Air Force Base was responsible for launch, landing, and turnaround operations for polar orbits (though this
8533-569: The micro gravity environment, particularly for EVA. Virtual reality is also becoming increasingly used as a tool to immerse AsCans into the space environment. The final phase is the Intensive Training. It starts about three months prior to launch, preparing candidates for their assigned mission. Flight-specific integrated simulations are designed to provide a dynamic testing ground for mission rules and flight procedures. The final Intensive Training joint crew/flight controller training
8694-484: The qualification requirements for their roles. The crew was divided into three categories: Pilots, Mission Specialists, and Payload Specialists. Pilots were further divided into two roles: Space Shuttle Commanders and Space Shuttle Pilots. The test flights only had two members each, the commander and pilot, who were both qualified pilots that could fly and land the orbiter. The on-orbit operations, such as experiments, payload deployment, and EVAs, were conducted primarily by
8855-448: The 2195 aluminum-lithium alloy, which was 40% stronger and 10% less dense than its predecessor, 2219 aluminum-lithium alloy. The SLWT weighed 3,400 kg (7,500 lb) less than the LWT, which allowed the Space Shuttle to deliver heavy elements to ISS's high inclination orbit. The Solid Rocket Boosters (SRB) provided 71.4% of the Space Shuttle's thrust during liftoff and ascent, and were
9016-452: The Air Force required a larger payload capacity than Faget's design allowed. In January 1971, NASA and Air Force leadership decided that a reusable delta-wing orbiter mounted on an expendable propellant tank would be the optimal design for the Space Shuttle. After they established the need for a reusable, heavy-lift spacecraft, NASA and the Air Force determined the design requirements of their respective services. The Air Force expected to use
9177-606: The Chinese air force and must be between 25 and 30 years of age, with a minimum of 800 hours flying time, and a degree-level education. Candidates must be between 160 cm and 172 cm in height, and between 50 kg and 70 kg in weight. For China's Shenzhou astronauts, training begins with a year-long program of education in the basics of spaceflight. During this period, candidates are also introduced to human physiology and psychology. The second phase of training, lasting nearly 3 years involves extensive training in piloting
9338-521: The ET. The SRBs were jettisoned before the vehicle reached orbit, while the main engines continued to operate, and the ET was jettisoned after main engine cutoff and just before orbit insertion , which used the orbiter's two Orbital Maneuvering System (OMS) engines. At the conclusion of the mission, the orbiter fired its OMS to deorbit and reenter the atmosphere . The orbiter was protected during reentry by its thermal protection system tiles, and it glided as
9499-680: The IMU, INS, and TACAN systems, which first flew on STS-118 in August 2007. While in orbit, the crew primarily communicated using one of four S band radios, which provided both voice and data communications. Two of the S ;band radios were phase modulation transceivers , and could transmit and receive information. The other two S band radios were frequency modulation transmitters and were used to transmit data to NASA. As S band radios can operate only within their line of sight , NASA used
9660-470: The IMUs while in orbit. The star trackers are deployed while in orbit, and can automatically or manually align on a star. In 1991, NASA began upgrading the inertial measurement units with an inertial navigation system (INS), which provided more accurate location information. In 1993, NASA flew a GPS receiver for the first time aboard STS-51 . In 1997, Honeywell began developing an integrated GPS/INS to replace
9821-526: The ISS are individually tailored, with consideration to the astronaut's particular experience and professional background. There are three different user levels for all on-board equipment (i.e. user level, operator level, and specialist level). A crew member can be a specialist on systems while also only being an operator or user on others, hence why the training program is individually tailored. Increment Specific Training also includes training to deal with off-nominal situations. Astronauts will also learn how to run
SECTION 60
#17328021360749982-450: The ISS astronauts, cosmonauts train in the US, Germany, Japan, and Canada for specific training in the various ISS modules. The Japanese human spaceflight program has historically focused on training astronauts for Space Shuttle missions. As such, training previously took place at NASA's Lyndon B. Johnson Space Center, and followed that of NASA astronauts and other international participants in
10143-548: The ISS. This phase takes around one year to complete and training is completed across the ISS partner network, no longer only at the EAC. It is only upon completion of this phase that astronauts are assigned to a spaceflight. Increment-Specific Training starts only after an astronaut has been assigned to a flight. This phase lasts 18 months and prepares them for their role on their assigned mission. During this phase crew members as well as backup crews will train together. The crew tasks on
10304-456: The International Space Station. Training on how to successfully carry out these experiments is an important part of astronaut training, as it maximizes the scientific return of the mission. Once on-orbit, communication between astronauts and scientists on the ground can be limited, and time is strictly apportioned between different mission activities. It is vital that astronauts are familiar with their assigned experiments in order to complete them in
10465-485: The KSC. The Space Shuttle was prepared for launch primarily in the VAB at the KSC. The SRBs were assembled and attached to the external tank on the MLP. The orbiter vehicle was prepared at the Orbiter Processing Facility (OPF) and transferred to the VAB, where a crane was used to rotate it to the vertical orientation and mate it to the external tank. Once the entire stack was assembled, the MLP
10626-564: The Partial Gravity Simulator (PGS) and air bearing floor (PABF) to simulate the zero-gravity and the effects of Newton's laws of motion . Similar training systems originated from the Apollo and Gemini training. Virtual reality enhances an astronaut's senses during training modules like fluid quick disconnect operations, spacewalks, and the orbiter's Space Shuttle thermal protection system (TPS) repairs. NASA Virtual Reality Laboratory utilizes virtual reality to supplement
10787-528: The RS-25 experienced multiple nozzle failures, as well as broken turbine blades. Despite the problems during testing, NASA ordered the nine RS-25 engines needed for its three orbiters under construction in May 1978. NASA experienced significant delays in the development of the Space Shuttle's thermal protection system . Previous NASA spacecraft had used ablative heat shields, but those could not be reused. NASA chose to use ceramic tiles for thermal protection, as
10948-505: The SRBs provided structural support for the orbiter vehicle and ET, as they were the only system that was connected to the mobile launcher platform (MLP). At the time of launch, the SRBs were armed at T−5 minutes, and could only be electrically ignited once the RS-25 engines had ignited and were without issue. They each provided 12,500 kN (2,800,000 lbf) of thrust, which was later improved to 13,300 kN (3,000,000 lbf) beginning on STS-8 . After expending their fuel,
11109-558: The SRBs were jettisoned approximately two minutes after launch at an altitude of approximately 46 km (150,000 ft). Following separation, they deployed drogue and main parachutes, landed in the ocean, and were recovered by the crews aboard the ships MV Freedom Star and MV Liberty Star . Once they were returned to Cape Canaveral, they were cleaned and disassembled. The rocket motor, igniter, and nozzle were then shipped to Thiokol to be refurbished and reused on subsequent flights. The SRBs underwent several redesigns throughout
11270-678: The Soyuz or ISS as well as professional skills. The final phases, the Crew Training phase, lasts a year and a half and is dedicated to detailed vehicle operations procedures, ISS training, and the English language . Training primarily takes place at the Yuri Gagarin Cosmonaut Training Center . The center facilities have full size mockups of all major Soviet and Russian spacecraft including the ISS. As with
11431-621: The Space Shuttle program. Since the development of domestic training facilities at the Tsukuba Space Center , training has increasingly taken place in Japan. With Japan's participation in the ISS, the training of Japanese astronauts follows a similar structure to that of other ISS partners. Astronauts carry out 1.5 years of Basic Training mainly at Tsukuba, followed by 1.5–2 years of Advanced Training at Tsukuba and ISS partner sites. Training for any international ISS astronauts involving
11592-399: The Space Shuttle through ascent, orbit, and reentry, but could not support an entire mission. The five GPCs were separated in three separate bays within the mid-deck to provide redundancy in the event of a cooling fan failure. After achieving orbit, the crew would switch some of the GPCs functions from guidance, navigation, and control (GNC) to systems management (SM) and payload (PL) to support
11753-526: The Space Shuttle to launch large satellites, and required it to be capable of lifting 29,000 kg (65,000 lb) to an eastward LEO or 18,000 kg (40,000 lb) into a polar orbit . The satellite designs also required that the Space Shuttle have a 4.6 by 18 m (15 by 60 ft) payload bay. NASA evaluated the F-1 and J-2 engines from the Saturn rockets , and determined that they were insufficient for
11914-583: The Spacelab module through a 2.7 or 5.8 m (8.72 or 18.88 ft) tunnel that connected to the airlock. The Spacelab equipment was primarily stored in pallets, which provided storage for both experiments as well as computer and power equipment. Spacelab hardware was flown on 28 missions through 1999 and studied subjects including astronomy, microgravity, radar, and life sciences. Spacelab hardware also supported missions such as Hubble Space Telescope (HST) servicing and space station resupply. The Spacelab module
12075-587: The U.S. National Aeronautics and Space Administration (NASA) as part of the Space Shuttle program . Its official program name was Space Transportation System (STS), taken from the 1969 plan led by U.S. Vice President Spiro Agnew for a system of reusable spacecraft where it was the only item funded for development. The first ( STS-1 ) of four orbital test flights occurred in 1981, leading to operational flights ( STS-5 ) beginning in 1982. Five complete Space Shuttle orbiter vehicles were built and flown on
12236-501: The US or in Russia. The Kempegowda centre will have chambers for radiation regulation, thermal cycling and centrifugal acceleration training. While the first generation of non-government spaceflight astronauts will likely perform suborbital trajectories, currently companies like Virgin Galactic and Xcor Aerospace are developing proprietary suborbital astronaut training programs. Astronauts for long-term missions–such as those to
12397-592: The VR applications, and astronauts need less time to complete the assigned practice task. Despite the NASA training modules, commercial spaceflight training also uses virtual reality technology to improve their training systems. Boeing's virtual reality team develops a training system for Boeing Starliner to train astronauts to transport between the Earth and the ISS. The VR training system can simulate high-speed situations and emergency scenarios, for instance, launching, entering
12558-585: The aft seating location, and also controlled the data on the HUD. In 1998, Atlantis was upgraded with the Multifunction Electronic Display System (MEDS), which was a glass cockpit upgrade to the flight instruments that replaced the eight MCDS display units with 11 multifunction colored digital screens. MEDS was flown for the first time in May 2000 on STS-101 , and the other orbiter vehicles were upgraded to it. The aft section of
12719-401: The associated propellant tanks. The AJ10 engines used monomethylhydrazine (MMH) oxidized by dinitrogen tetroxide (N 2 O 4 ). The pods carried a maximum of 2,140 kg (4,718 lb) of MMH and 3,526 kg (7,773 lb) of N 2 O 4 . The OMS engines were used after main engine cut-off (MECO) for orbital insertion. Throughout the flight, they were used for orbit changes, as well as
12880-421: The astronauts candidates an immersive training experience. Virtual reality has been explored as a technology to artificially expose astronauts to space conditions and procedures prior to going into space. Using virtual reality, astronauts can be trained and evaluated on performing an EVA (extravehicular activity) with all the necessary equipment and environmental features simulated. This modern technology also allows
13041-466: The astronauts from being their personal assistants to next generation of extreme environment explorers. Currently there is a robot on the ISS aiding the astronauts in their mammoth tasks with a human touch. Intercultural and human robot interaction training is the need of the hour for long duration missions. Training also has to be evolved for future Moon landings to a human mission to Mars . Factors like crew dynamics, crew size, and crew activities play
13202-562: The built-in hold at T−9 minutes, the countdown was automatically controlled by the Ground Launch Sequencer (GLS) at the LCC, which stopped the countdown if it sensed a critical problem with any of the Space Shuttle's onboard systems. At T−3 minutes 45 seconds, the engines began conducting gimbal tests, which were concluded at T−2 minutes 15 seconds. The ground Launch Processing System handed off
13363-461: The bulk of the ET, and was 29 m (96.7 ft) tall. The orbiter vehicle was attached to the ET at two umbilical plates, which contained five propellant and two electrical umbilicals, and forward and aft structural attachments. The exterior of the ET was covered in orange spray-on foam to allow it to survive the heat of ascent. The ET provided propellant to the Space Shuttle Main Engines from liftoff until main engine cutoff. The ET separated from
13524-462: The central computer maneuvers the device using a web of cables and calculates how it would act in space through physics. While objects are weightless in space, an astronaut has to be familiar with an object's forces of inertia and understand how the object will respond to simple motions to avoid losing it in space. Training can be completed individually or with a partner. This allows astronauts to learn how to interact with mass and moments of inertia in
13685-837: The company is filing for bankruptcy. In June 2019 Space Nation announced that the company has been restructured and reestablished in the United States and resumed its activities. Astronaut training Astronaut training describes the complex process of preparing astronauts in regions around the world for their space missions before, during and after the flight, which includes medical tests, physical training, extra-vehicular activity (EVA) training, wilderness survival training , water survival training , robotics training , procedure training, rehabilitation process, as well as training on experiments they will accomplish during their stay in space. Virtual and physical training facilities have been integrated to familiarize astronauts with
13846-455: The conditions they will encounter during all phases of flight and prepare astronauts for a microgravity environment. Special considerations must be made during training to ensure a safe and successful mission, which is why the Apollo astronauts received training for geology field work on the Lunar surface and why research is being conducted on best practices for future extended missions, such as
14007-550: The contract to build the orbiter to North American Rockwell. In August 1973, the external tank contract to Martin Marietta , and in November the solid-rocket booster contract to Morton Thiokol . On June 4, 1974, Rockwell began construction on the first orbiter, OV-101, dubbed Constitution, later to be renamed Enterprise . Enterprise was designed as a test vehicle, and did not include engines or heat shielding. Construction
14168-477: The control to the orbiter vehicle's GPCs at T−31 seconds. At T−16 seconds, the GPCs armed the SRBs, the sound suppression system (SPS) began to drench the MLP and SRB trenches with 1,100,000 L (300,000 U.S. gal) of water to protect the orbiter vehicle from damage by acoustical energy and rocket exhaust reflected from the flame trench and MLP during lift-off. At T−10 seconds, hydrogen igniters were activated under each engine bell to quell
14329-421: The deorbit burn prior to reentry. Each OMS engine produced 27,080 N (6,087 lbf) of thrust, and the entire system could provide 305 m/s (1,000 ft/s) of velocity change . The orbiter was protected from heat during reentry by the thermal protection system (TPS), a thermal soaking protective layer around the orbiter. In contrast with previous US spacecraft, which had used ablative heat shields,
14490-516: The development of a space shuttle to bring people and cargo to low Earth orbit (LEO), as well as a space tug for transfers between orbits and the Moon, and a reusable nuclear upper stage for deep space travel. After the release of the Space Shuttle Task Group report, many aerospace engineers favored the Class III, fully reusable design because of perceived savings in hardware costs. Max Faget ,
14651-674: The ease of refurbishing them for reuse after they landed in the ocean. In January 1972, President Richard Nixon approved the Shuttle, and NASA decided on its final design in March. The development of the Space Shuttle Main Engine (SSME) remained the responsibility of Rocketdyne, and the contract was issued in July 1971, and updated SSME specifications were submitted to Rocketdyne in that April. That August, NASA awarded
14812-643: The effect of immersion or the engagement of the trainee. At NASA, following the selection phase, the so-called "AsCans" (Astronaut candidates) have to undergo up to two years of training to become fully qualified astronauts. Initially, all AsCans must go through basic training to learn both technical and soft skills. There are 16 different technical courses in: AsCans initially go through Basic Training, where they are trained on Soyuz , and ISS systems, flight safety and operations, as well as land and water survival. Pilot AsCans will receive training on NASA's T-38 Trainer Jet . Furthermore, because modern space exploration
14973-492: The effects of aerodynamic and thermal stresses during launch and reentry. The beginning of the development of the RS-25 Space Shuttle Main Engine was delayed for nine months while Pratt & Whitney challenged the contract that had been issued to Rocketdyne. The first engine was completed in March 1975, after issues with developing the first throttleable, reusable engine. During engine testing,
15134-546: The efficacy of training using virtual reality versus underwater and other setup. Through the years of technological development in VR, the hardware for the VR Lab in NASA has also significantly improved. Both the material and the resolution of the display are being renovated: Virtual reality has also been adopted to a much wider range of fields in space exploration throughout the history of technology renovation. The newer applications of VR include but are not limited to: While
15295-443: The engineering systems of the spacecraft including spacecraft propulsion , spacecraft thermal control , and life support systems . In addition to this, astronauts receive training in orbital mechanics , scientific experimentation, earth observation , and astronomy . This training is particularly important for missions when an astronaut will encounter multiple systems (for example on the International Space Station (ISS)). Training
15456-512: The engines during powered flight and fly the orbiter during unpowered flight. Both seats also had rudder controls, to allow rudder movement in flight and nose-wheel steering on the ground. The orbiter vehicles were originally installed with the Multifunction CRT Display System (MCDS) to display and control flight information. The MCDS displayed the flight information at the commander and pilot seats, as well as at
15617-532: The experiment. Much of this training is done at the European Astronaut Center. For human experiments, the scientists describe their experiments to the astronauts who then choose whether to participate on board the ISS. For these experiments, the astronauts will be tested before, during, and after the mission to establish a baseline and determine when the astronaut returned to the baseline. Virtual reality training for astronauts intends to give
15778-444: The experiments that are specifically scheduled for their assigned missions. Training for cosmonauts falls into three phases: General Space Training, Group Training, and Crew Training. General Space Training lasts about two years and consists of classes, survival training, and a final exam which determines whether a cosmonaut will be a test or research cosmonaut. The next year is devoted to Group Training where cosmonauts specialize in
15939-635: The extravehicular activities (EVAs) training facility can simulate the space conditions, including pressure and lighting, the Micro-g environment cannot be fully reconstructed in the Earth's 1-G environment. Virtual reality is utilized during EVA training to increase the immersion of the training process. NASA Johnson Space Center has facilities such as the Space Vehicle Mockup Facility (SVMF), Virtual Reality Laboratory (VRL), and Neutral Buoyancy Laboratory (NBL). The SVMF uses
16100-605: The feasibility of reusable boosters. This became the basis for the aerospaceplane , a fully reusable spacecraft that was never developed beyond the initial design phase in 1962–1963. Beginning in the early 1950s, NASA and the Air Force collaborated on developing lifting bodies to test aircraft that primarily generated lift from their fuselages instead of wings, and tested the NASA M2-F1 , Northrop M2-F2 , Northrop M2-F3 , Northrop HL-10 , Martin Marietta X-24A , and
16261-672: The final decision to scrub a launch was announced. In addition to the weather at the launch site, conditions had to be acceptable at one of the Transatlantic Abort Landing sites and the SRB recovery area. The mission crew and the Launch Control Center (LCC) personnel completed systems checks throughout the countdown. Two built-in holds at T−20 minutes and T−9 minutes provided scheduled breaks to address any issues and additional preparation. After
16422-532: The first four Shuttle missions, astronauts wore modified U.S. Air Force high-altitude full-pressure suits, which included a full-pressure helmet during ascent and descent. From the fifth flight, STS-5 , until the loss of Challenger , the crew wore one-piece light blue nomex flight suits and partial-pressure helmets. After the Challenger disaster, the crew members wore the Launch Entry Suit (LES),
16583-508: The first million of which in only 43 minutes. The company had predicted a profit of 84 million Euro until May 2018, 347 million Euro in 2018–2019, and a 119-fold rise in valuation to 5 billion Euro in 2019. Space Nation launched a lifestyle website in October 2017 called Space Nation Orbit . The company had plans for a TV show around the physical training camp to take place in early 2019. Further plans included "Space Nation Experience Parks",
16744-590: The first one potentially being in China. Space Nation owns "an office" on board the International Space Station (ISS), which is a 50x50x30 cm box. The company is a NASA Space Act Agreement signatory. NASA announced that it has provided free content for the app through a Space Act Agreement . In August 2018, Space Nation announced it had "encountered financial difficulties" and put the "Space Nation Astronaut Program" on an indefinite hold. On November 16, 2018, Space Nation's CEO informed investors and crowdfunders, that
16905-481: The first time NASA performed a crewed first-flight of a spacecraft. On April 12, 1981, the Space Shuttle launched for the first time, and was piloted by John Young and Robert Crippen . During the two-day mission, Young and Crippen tested equipment on board the shuttle, and found several of the ceramic tiles had fallen off the top side of the Columbia . NASA coordinated with the Air Force to use satellites to image
17066-635: The flight deck contained windows looking into the payload bay, as well as an RHC to control the Remote Manipulator System during cargo operations. Additionally, the aft flight deck had monitors for a closed-circuit television to view the cargo bay. The mid-deck contained the crew equipment storage, sleeping area, galley, medical equipment, and hygiene stations for the crew. The crew used modular lockers to store equipment that could be scaled depending on their needs, as well as permanently installed floor compartments. The mid-deck contained
17227-502: The forward separation motors and the parachute systems that were used during recovery. The rocket nozzles could gimbal up to 8° to allow for in-flight adjustments. The rocket motors were each filled with a total 500,000 kg (1,106,640 lb) of solid rocket propellant ( APCP + PBAN ), and joined in the Vehicle Assembly Building (VAB) at KSC. In addition to providing thrust during the first stage of launch,
17388-535: The future. A powerful tool for astronaut training will be the continuing use of analog environments, including NASA Extreme Environment Mission Operations ( NOAA NEEMO ), NASA's Desert Research and Technology Studies ( Desert RATS ), Envihab (planned), Flight Analog Research Unit , Haughton-Mars Project ( HMP ), or even the ISS (in-flight). In fact, at NEEMO a total of 15 mission astronauts (known as aquanauts ) have been trained for future missions to asteroids. The use of virtual reality will also continue to be used as
17549-402: The inner leading edge and 45° at the outer leading edge. Each wing had an inboard and outboard elevon to provide flight control during reentry, along with a flap located between the wings, below the engines to control pitch . The orbiter's vertical stabilizer was swept backwards at 45° and contained a rudder that could split to act as a speed brake . The vertical stabilizer also contained
17710-504: The largest solid-propellant motors ever flown. Each SRB was 45 m (149.2 ft) tall and 3.7 m (12.2 ft) wide, weighed 68,000 kg (150,000 lb), and had a steel exterior approximately 13 mm (.5 in) thick. The SRB's subcomponents were the solid-propellant motor, nose cone, and rocket nozzle. The solid-propellant motor comprised the majority of the SRB's structure. Its casing consisted of 11 steel sections which made up its four main segments. The nose cone housed
17871-575: The late 1950s, the Air Force began developing the partially reusable X-20 Dyna-Soar . The Air Force collaborated with NASA on the Dyna-Soar and began training six pilots in June 1961. The rising costs of development and the prioritization of Project Gemini led to the cancellation of the Dyna-Soar program in December 1963. In addition to the Dyna-Soar, the Air Force had conducted a study in 1957 to test
18032-490: The launch pad, the Space Shuttle was used to verify the proper positioning of the launch complex hardware. Enterprise was taken back to California in August 1979, and later served in the development of the SLC-6 at Vandenberg AFB in 1984. On November 24, 1980, Columbia was mated with its external tank and solid-rocket boosters, and was moved to LC-39 on December 29. The first Space Shuttle mission, STS-1 , would be
18193-432: The major spacefaring nations, their space agencies, and all major crewed and uncrewed space programs. Training in this phase also looks into applicable laws and policies of the space sector. Technical (including engineering, astrodynamics , propulsion, orbital mechanics, etc.) and scientific (including human physiology , biology , earth observation, and astronomy) basics are introduced, to ensure that all new astronauts have
18354-497: The mental and emotional stressors of long duration spaceflight, and a hypobaric chamber for training in hull breach or Life Support System failure scenarios resulting in a reduction or loss of air pressure. Although official details of the selection process for the Shenzhou program are not available, what is known is that candidates are chosen by the Chinese National Space Administration from
18515-437: The mission specialists who were specifically trained for their intended missions and systems. Early in the Space Shuttle program, NASA flew with payload specialists, who were typically systems specialists who worked for the company paying for the payload's deployment or operations. The final payload specialist, Gregory B. Jarvis , flew on STS-51-L , and future non-pilots were designated as mission specialists. An astronaut flew as
18676-658: The most significant effects that occur being space motion sickness , orthostatic intolerance , and cardiovascular events . Space motion sickness is an event that can occur within minutes of being in changing gravity environments (i.e. from 1g on Earth prior to launch to more than 1g during launch, and then from microgravity in space to hypergravity during re-entry and again to 1g after landing). The symptoms range from drowsiness and headaches, to nausea and vomiting. There are three general categories of space motion sickness: About three-fourths of astronauts experience space motion sickness, with effects rarely exceeding two days. There
18837-434: The operational mission. The Space Shuttle was not launched if its flight would run from December to January, as its flight software would have required the orbiter vehicle's computers to be reset at the year change. In 2007, NASA engineers devised a solution so Space Shuttle flights could cross the year-end boundary. Space Shuttle missions typically brought a portable general support computer (PGSC) that could integrate with
18998-424: The optimal design for a reusable spacecraft, and issued study contracts to General Dynamics , Lockheed , McDonnell Douglas , and North American Rockwell . In July 1969, the Space Shuttle Task Group issued a report that determined the Shuttle would support short-duration crewed missions and space station, as well as the capabilities to launch, service, and retrieve satellites. The report also created three classes of
19159-436: The orange foam itself was sufficiently protected, and the ET was no longer covered in latex paint beginning on STS-3. A light-weight tank (LWT) was first flown on STS-6, which reduced tank weight by 4,700 kg (10,300 lb). The LWT's weight was reduced by removing components from the hydrogen tank and reducing the thickness of some skin panels. In 1998, a super light-weight ET (SLWT) first flew on STS-91 . The SLWT used
19320-437: The orbiter vehicle 18 seconds after engine cutoff and could be triggered automatically or manually. At the time of separation, the orbiter vehicle retracted its umbilical plates, and the umbilical cords were sealed to prevent excess propellant from venting into the orbiter vehicle. After the bolts attached at the structural attachments were sheared, the ET separated from the orbiter vehicle. At the time of separation, gaseous oxygen
19481-467: The orbiter vehicle and would be removed and replaced in between flights. The RS-25 is a staged-combustion cycle cryogenic engine that used liquid oxygen and hydrogen and had a higher chamber pressure than any previous liquid-fueled rocket. The original main combustion chamber operated at a maximum pressure of 226.5 bar (3,285 psi). The engine nozzle is 287 cm (113 in) tall and has an interior diameter of 229 cm (90.3 in). The nozzle
19642-510: The orbiter vehicle's computers and communication suite, as well as monitor scientific and payload data. Early missions brought the Grid Compass , one of the first laptop computers, as the PGSC, but later missions brought Apple and Intel laptops. The payload bay comprised most of the orbiter vehicle's fuselage , and provided the cargo-carrying space for the Space Shuttle's payloads. It
19803-549: The orbiter vehicle's heat, and were opened upon reaching orbit for heat rejection. The orbiter could be used in conjunction with a variety of add-on components depending on the mission. This included orbital laboratories, boosters for launching payloads farther into space, the Remote Manipulator System (RMS), and optionally the EDO pallet to extend the mission duration. To limit the fuel consumption while
19964-528: The orbiter was docked at the ISS, the Station-to-Shuttle Power Transfer System (SSPTS) was developed to convert and transfer station power to the orbiter. The SSPTS was first used on STS-118, and was installed on Discovery and Endeavour . The Remote Manipulator System (RMS), also known as Canadarm, was a mechanical arm attached to the cargo bay. It could be used to grasp and manipulate payloads, as well as serve as
20125-491: The organization of space systems, and the acronyms in aerospace engineering during the basic training. While 60% to 80% of the astronauts will experience space motion sickness, including pallor, cold sweating, vomiting, and anorexia, the astronaut candidates are expected to overcome the sickness. During the advanced training and the mission specific training, astronauts will learn about the operation of specific systems and skills required associated with their assigned positions in
20286-549: The originally specified thrust at 100%, but had the RS-25 operate at higher thrust. RS-25 upgrade versions were denoted as Block I and Block II. 109% thrust level was achieved with the Block II engines in 2001, which reduced the chamber pressure to 207.5 bars (3,010 psi), as it had a larger throat area. The normal maximum throttle was 104 percent, with 106% or 109% used for mission aborts. The Orbital Maneuvering System (OMS) consisted of two aft-mounted AJ10-190 engines and
20447-673: The physics and environment of outer space. Astronaut training in Europe is carried out by the European Astronaut Centre (EAC), headquartered in Cologne , Germany . European training has three phases: Basic training, Advanced training, and Increment Specific Training. For all ESA selected astronauts, Basic Training begins at the EAC headquarters. This section of the training cycle has four separate training blocks that last 16 months. Astronauts will receive an orientation on
20608-405: The program's lifetime. STS-6 and STS-7 used SRBs 2,300 kg (5,000 lb) lighter due to walls that were 0.10 mm (.004 in) thinner, but were determined to be too thin to fly safely. Subsequent flights until STS-26 used cases that were 0.076 mm (.003 in) thinner than the standard-weight cases, which reduced 1,800 kg (4,000 lb). After the Challenger disaster as
20769-400: The propellant for the Space Shuttle Main Engines, and connected the orbiter vehicle with the solid rocket boosters. The ET was 47 m (153.8 ft) tall and 8.4 m (27.6 ft) in diameter, and contained separate tanks for liquid oxygen and liquid hydrogen. The liquid oxygen tank was housed in the nose of the ET, and was 15 m (49.3 ft) tall. The liquid hydrogen tank comprised
20930-731: The required base level of knowledge. Training is done on ISS operations and facilities, including an introduction to all major operating systems on board the ISS that are required for its functionality as a crewed space research laboratory. This phase also covers in-depth systems operations for all spacecraft that service the ISS (e.g. Soyuz, Progress , Automatic Transfer Vehicle ( ATV ), and the H-II Transfer Vehicle ( HTV )), as well as ground control and launch facility training. This training phase also focuses on skills such as robotic operations , rendezvous and docking , Russian language courses, human behavior and performance, and finally
21091-465: The requirements of the Space Shuttle; in July 1971, it issued a contract to Rocketdyne to begin development on the RS-25 engine. NASA reviewed 29 potential designs for the Space Shuttle and determined that a design with two side boosters should be used, and the boosters should be reusable to reduce costs. NASA and the Air Force elected to use solid-propellant boosters because of the lower costs and
21252-685: The reusability of the orbiter required a multi-use heat shield. During reentry, the TPS experienced temperatures up to 1,600 °C (3,000 °F), but had to keep the orbiter vehicle's aluminum skin temperature below 180 °C (350 °F). The TPS primarily consisted of four types of tiles. The nose cone and leading edges of the wings experienced temperatures above 1,300 °C (2,300 °F), and were protected by reinforced carbon-carbon tiles (RCC). Thicker RCC tiles were developed and installed in 1998 to prevent damage from micrometeoroid and orbital debris , and were further improved after RCC damage caused in
21413-482: The scenario to be changed on the go, such as to test emergency protocols. The VR training systems can reduce the effects of the space motion sickness through a process of habituation. Preflight VR training can be a countermeasure for space motion sickness and disorientation due to the weightlessness of the microgravity environment. When the goal is to act as a practice tool, virtual reality is commonly explored in conjunction with robotics and additional hardware to increase
21574-529: The shuttle could then be constructed of lightweight aluminum , and the tiles could be individually replaced as needed. Construction began on Columbia on March 27, 1975, and it was delivered to the KSC on March 25, 1979. At the time of its arrival at the KSC, Columbia still had 6,000 of its 30,000 tiles remaining to be installed. However, many of the tiles that had been originally installed had to be replaced, requiring two years of installation before Columbia could fly. On January 5, 1979, NASA commissioned
21735-414: The space, and landing at an unexpected location. Visual reorientation is a phenomenon that happens when the perception of an object changes because of the changing visual field and cues. This illusion will alter the astronaut's perception of the orienting force of gravity and then lose spatial direction. The astronauts must develop good spatial awareness and orientation to overcome visual reorientation. In
21896-754: The successful completion of their mission. This could be in the form of training for EVA , scientific experimentation, or spacecraft piloting . External events refer more broadly to the ability to live and work in the extreme environment of space. This includes adaptation to microgravity (or weightlessness ), isolation, confinement, and radiation . The difficulties associated with living and working in microgravity include spatial disorientation , motion sickness, and vertigo . During long-duration missions, astronauts will often experience isolation and confinement. This has been known to limit performance of astronaut crews and hence training aims to prepare astronauts for such challenges. The long-term effects of radiation on crews
22057-441: The three phases of a space mission. They can be divided in: Astronauts are trained in preparation for the conditions of launch as well as the harsh environment of space. This training aims to prepare the crew for events falling under two broad categories: events relating to operation of the spacecraft (internal events), and events relating to the space environment (external events) During training, astronauts are familiarized with
22218-423: The traditional disorientation training, for instance, the Yuri Gagarin Cosmonaut Training Center trains the astronaut by simulating a microgravity environment through a centrifuge. In contrast, VR training requires less gear, training the astronauts more economically. Space Shuttle The Space Shuttle is a retired, partially reusable low Earth orbital spacecraft system operated from 1981 to 2011 by
22379-524: The training process are completed with various training facilities available in NASA: Space training facilities try to replicate or simulate the experience of spaceflight in a spacecraft as closely and realistically as possible. This includes full-size cockpit replicas mounted on hydraulic rams and controlled by state of the art computer technology; elaborate watertanks for simulation of weightlessness ; and devices used by scientists to study
22540-469: The trip to Mars. The selection and training of astronauts are integrated processes to ensure the crew members are qualified for space missions. The training is categorized into five objectives to train the astronauts on the general and specific aspects: basic training, advanced training, mission-specific training, onboard training, and proficiency maintenance training. The trainees must learn medicine, language, robotics and piloting, space system engineering,
22701-418: The underside of Columbia , and determined there was no damage. Columbia reentered the atmosphere and landed at Edwards AFB on April 14. NASA conducted three additional test flights with Columbia in 1981 and 1982. On July 4, 1982, STS-4 , flown by Ken Mattingly and Henry Hartsfield , landed on a concrete runway at Edwards AFB. President Ronald Reagan and his wife Nancy met the crew, and delivered
22862-467: The upper parts of the orbiter vehicle were coated in tiles of white low-temperature reusable surface insulation with similar composition, which provided protection for temperatures below 650 °C (1,200 °F). The payload bay doors and parts of the upper wing surfaces were coated in reusable Nomex felt surface insulation or in beta cloth , as the temperature there remained below 370 °C (700 °F). The Space Shuttle external tank (ET) carried
23023-743: The use of the Shuttle Training Aircraft while it was still operational and is done through simulation mock-ups. The shuttle training aircraft was exclusively used by the commander and pilot astronauts for landing practices until the retirement of the Shuttle, while advanced simulation system facilities are used by all the candidates to learn how to work and successfully fulfill their tasks in the space environment. Simulators and EVA training facilities help candidates to best prepare for their different mission operations. In particular, vacuum chambers , parabolic flights , and neutral buoyancy facilities (NBF) allow candidates to get acclimated to
23184-519: Was 1,323 days. Space Shuttle components include the Orbiter Vehicle (OV) with three clustered Rocketdyne RS-25 main engines, a pair of recoverable solid rocket boosters (SRBs), and the expendable external tank (ET) containing liquid hydrogen and liquid oxygen . The Space Shuttle was launched vertically , like a conventional rocket, with the two SRBs operating in parallel with the orbiter's three main engines , which were fueled from
23345-462: Was 18 m (60 ft) long and 4.6 m (15 ft) wide, and could accommodate cylindrical payloads up to 4.6 m (15 ft) in diameter. Two payload bay doors hinged on either side of the bay, and provided a relatively airtight seal to protect payloads from heating during launch and reentry. Payloads were secured in the payload bay to the attachment points on the longerons . The payload bay doors served an additional function as radiators for
23506-499: Was Space Shuttle-specific software that provided control through all phases of flight. During ascent, maneuvering, reentry, and landing, the four PASS GPCs functioned identically to produce quadruple redundancy and would error check their results. In case of a software error that would cause erroneous reports from the four PASS GPCs, a fifth GPC ran the Backup Flight System, which used a different program and could control
23667-641: Was a modified airport jet bridge that was used to assist astronauts to egress from the orbiter after landing, where they would undergo their post-mission medical checkups. The Astrovan transported astronauts from the crew quarters in the Operations and Checkout Building to the launch pad on launch day. The NASA Railroad comprised three locomotives that transported SRB segments from the Florida East Coast Railway in Titusville to
23828-466: Was carried for 5.6 km (3.5 mi) to Launch Complex 39 by one of the crawler-transporters . After the Space Shuttle arrived at one of the two launchpads, it would connect to the Fixed and Rotation Service Structures, which provided servicing capabilities, payload insertion, and crew transportation. The crew was transported to the launch pad at T−3 hours and entered the orbiter vehicle, which
23989-565: Was closed at T−2 hours. Liquid oxygen and hydrogen were loaded into the external tank via umbilicals that attached to the orbiter vehicle, which began at T−5 hours 35 minutes. At T−3 hours 45 minutes, the hydrogen fast-fill was complete, followed 15 minutes later by the oxygen tank fill. Both tanks were slowly filled up until the launch as the oxygen and hydrogen evaporated. The launch commit criteria considered precipitation, temperatures, cloud cover, lightning forecast, wind, and humidity. The Space Shuttle
24150-686: Was completed on September 17, 1976, and Enterprise was moved to the Edwards Air Force Base to begin testing. Rockwell constructed the Main Propulsion Test Article (MPTA)-098 , which was a structural truss mounted to the ET with three RS-25 engines attached. It was tested at the National Space Technology Laboratory (NSTL) to ensure that the engines could safely run through the launch profile. Rockwell conducted mechanical and thermal stress tests on Structural Test Article (STA)-099 to determine
24311-551: Was entirely reliant on its main computer, the Data Processing System (DPS). The DPS controlled the flight controls and thrusters on the orbiter, as well as the ET and SRBs during launch. The DPS consisted of five general-purpose computers (GPC), two magnetic tape mass memory units (MMUs), and the associated sensors to monitor the Space Shuttle components. The original GPC used was the IBM AP-101B , which used
24472-657: Was equipped with an avionics system to provide information and control during atmospheric flight. Its avionics suite contained three microwave scanning beam landing systems , three gyroscopes , three TACANs , three accelerometers , two radar altimeters , two barometric altimeters , three attitude indicators , two Mach indicators , and two Mode C transponders . During reentry, the crew deployed two air data probes once they were traveling slower than Mach 5. The orbiter had three inertial measuring units (IMU) that it used for guidance and navigation during all phases of flight. The orbiter contains two star trackers to align
24633-653: Was first flown in 1975, and was used for the ALT and ferrying the orbiter from Edwards AFB to the KSC on all missions prior to 1991. A second SCA (N911NA) was acquired in 1988, and was first used to transport Endeavour from the factory to the KSC. Following the retirement of the Space Shuttle, N905NA was put on display at the JSC, and N911NA was put on display at the Joe Davies Heritage Airpark in Palmdale, California . The Crew Transport Vehicle (CTV)
24794-403: Was later improved to 270,000 kg (586,000 lb). The Spacelab module was a European-funded pressurized laboratory that was carried within the payload bay and allowed for scientific research while in orbit. The Spacelab module contained two 2.7 m (9 ft) segments that were mounted in the aft end of the payload bay to maintain the center of gravity during flight. Astronauts entered
24955-406: Was located below the flight deck and was where the galley and crew bunks were set up, as well as three or four crew member seats. The mid-deck contained the airlock, which could support two astronauts on an extravehicular activity (EVA), as well as access to pressurized research modules. An equipment bay was below the mid-deck, which stored environmental control and waste management systems. On
25116-617: Was moved to the Marshall Space Flight Center (MSFC) on March 13, 1978. Enterprise underwent shake tests in the Mated Vertical Ground Vibration Test, where it was attached to an external tank and solid rocket boosters, and underwent vibrations to simulate the stresses of launch. In April 1979, Enterprise was taken to the KSC, where it was attached to an external tank and solid rocket boosters, and moved to LC-39 . Once installed at
25277-602: Was never used). The Johnson Space Center (JSC) served as the central point for all Shuttle operations and the MSFC was responsible for the main engines, external tank, and solid rocket boosters. The John C. Stennis Space Center handled main engine testing, and the Goddard Space Flight Center managed the global tracking network. The orbiter had design elements and capabilities of both a rocket and an aircraft to allow it to launch vertically and then land as
25438-422: Was not launched under conditions where it could have been struck by lightning , as its exhaust plume could have triggered lightning by providing a current path to ground after launch, which occurred on Apollo 12 . The NASA Anvil Rule for a Shuttle launch stated that an anvil cloud could not appear within a distance of 19 km (10 nmi). The Shuttle Launch Weather Officer monitored conditions until
25599-418: Was tested on STS-2 and STS-3, and the first full mission was on STS-9. Three RS-25 engines, also known as the Space Shuttle Main Engines (SSME), were mounted on the orbiter's aft fuselage in a triangular pattern. The engine nozzles could gimbal ±10.5° in pitch, and ±8.5° in yaw during ascent to change the direction of their thrust to steer the Shuttle. The titanium alloy reusable engines were independent of
25760-444: Was the top level of the crew compartment and contained the flight controls for the orbiter. The commander sat in the front left seat, and the pilot sat in the front right seat, with two to four additional seats set up for additional crew members. The instrument panels contained over 2,100 displays and controls, and the commander and pilot were both equipped with a heads-up display (HUD) and a Rotational Hand Controller (RHC) to gimbal
25921-551: Was vented from the nose to cause the ET to tumble, ensuring that it would break up upon reentry. The ET was the only major component of the Space Shuttle system that was not reused, and it would travel along a ballistic trajectory into the Indian or Pacific Ocean. For the first two missions, STS-1 and STS-2 , the ET was covered in 270 kg (595 lb) of white fire-retardant latex paint to provide protection against damage from ultraviolet radiation. Further research determined that
#73926