Misplaced Pages

#962037

73-501: Reising was an assistant to firearm inventor John M. Browning . In this role, Reising contributed to the final design of the US .45 ACP M1911 pistol . Reising then designed a number of commercial rifles and pistols on his own, when in 1938, he turned his attention to designing a submachine gun as threats of war rapidly grew in Europe. Two years later he submitted his completed design to

146-400: A "commercial" and "military" Model 50 is amorphous. First, H&R never made a distinction; the distinction is made by collectors. This confusion stems from a period in production where early Model 50s were manufactured with commercial characteristics and H&R's wartime practice of randomly installing old parts in stock throughout production. While there is not one factor that distinguishes

219-609: A Model 50, but had an 18.75 in (476 mm) barrel without cooling fins or a compensator. H&R promoted the submachine guns for police and military use, and the Model 60 for security guards. After the Japanese attack on Pearl Harbor in December 1941 the US was suddenly in desperate need of thousands of modern automatic weapons. Reising's only competitor was the .45 ACP Thompson submachine gun . The US Army first tested

292-458: A Reising submachine gun. At the time, machine guns were not thought to be in the hands of civilians in the country. John M. Browning John Moses Browning (January 23, 1855 – November 26, 1926) was an American firearm designer who developed many varieties of military and civilian firearms, cartridges , and gun mechanisms, many of which are still in use around the world. He made his first firearm at age 13 in his father's gun shop and

365-436: A cartridge loaded in the chamber. There is nothing to prevent the hammer from contacting the firing pin and by default the cartridge, in some models, and so the gun will be discharged unintentionally. Other models do have an internal safety mechanism that prevents contact between the hammer and the firing pin unless the trigger is actually pulled. Even so, many single-action revolver owners choose to carry their revolver with

438-437: A cartridge was awkward as the action bar was hard to grasp in the forearm and could be obstructed by the sling. Worse, the safety/selector switch couldn't be sensed by feel at night if it was in the safe, semi, or automatic position. "Filing-to-fit" of certain parts during production limited interchangeability. The exposed rear sight had no protective ears and was vulnerable to breakage. The adjustable front sight could be lost if

511-458: A closed bolt with its return spring as part of its cocking handle underneath the barrel. It notably used a linear hammer in the main receiver. The Reising was more balanced than the Thompson because the barrel-and-receiver-group rested concentrically within the stock. It had smoother lines in that the stock was of conventional shape, and because the cocking handle (action bar) was placed inside

584-402: A combat environment. The retaining pins had to be delicately tapped out whenever the bolt needed to be removed for cleaning; again, an awkwardly involved task whilst under fire. And afterwards when the pins had to be put back during the reassembly process, if they were inserted either too far or not far enough, the receiver might not fit back into the tight confines of the stock. What constitutes

657-533: A compact and light carbine, since the newly introduced M1 carbine was not yet being issued to the Marines. Although the Thompson submachine gun was available, this weapon frequently proved too heavy and bulky for jungle patrols , and initially it, too, was in short supply. During World War II, the Reising first saw action on August 7, 1942, exactly eight months to the day after Pearl Harbor, when 11,000 men from

730-406: A designed full-auto cyclic rate of 450–600 rounds per minute but it was reported that the true full-auto rate was closer to 750–850 rounds per minute. At those rates, the twenty round magazine could be emptied in less than two seconds. In 1941, the Reising was priced at approximately $ 50 per weapon as opposed to $ 225 for the standard military issue Thompson submachine gun. There were four versions of

803-439: A mockery of H&R's company slogan, "Six-and-one-half pounds of controlled dynamite. The H&R Reising will get a bullet there when you need it!" There are other reasons for its failure. Foremost was the Reising's complex design of many small pins, plungers, springs and levers. Disassembly and assembly was difficult even under normal conditions. Simple maintenance was problematic as there was no bolt hold-open device. Chambering

SECTION 10

#1732786666963

876-602: A number of Model 50 receivers, Numrich assembled them with parts. These weapons all have an "S" preceding the serial number and were sold domestically in the early 1990s after reparkerization and fitting with newly manufactured walnut stocks. These stocks are distinguished from originals by their wider than normal sling swivels and buttstocks, by the fact they have no stock ties, and have H&R marked plastic buttplates (originals were unmarked metal). In New Zealand in December 1963, two men thought to have been operating an illegal beerhouse business were murdered execution-style with

949-406: A range of 300 yards." This was attributed to its better stock fit and intricate closed bolt , delayed blowback design. Most submachine guns fire from the open bolt position, meaning the full mass of the bolt slams forward when the trigger is pulled; with the closed-bolt system employed by the Reising there is much less movement involving far lighter components, and the resulting improved control in

1022-574: A rear sight with a retaining screw. They routinely have 14 fins on the barrel, a two-piece magazine release, outward flanges on the safety/selector switch, sling swivels, stock ties (crossbolts through the forearm), and a knurled take-down screw. Finally, the military model commonly has a three-hole trigger guard, proofmarks like "PH" or "Pm2" above the chamber, and serial numbers ranging from 20,000 to 120,000. There are three types of H&R magazines. The first and second models are both smooth body, are blued, and are twenty-shot double column. The first model

1095-690: A series of rifles and shotguns, most notably the lever action Winchester Model 1887 and the Model 1897 pump shotgun, the falling-block single-shot Model 1885 , and the lever-action Model 1886 , Model 1892 , Model 1894 , Model 1895 rifles. After falling out with Winchester, Browning designed the long recoil operated semi-automatic Remington Model 8 rifle. Many of the models are still in production today in some form; over six million Model 1894s had been produced as of 1983, more than any other sporting rifle in history. Winchester manufactured several popular small arms designed by John M. Browning. For decades in

1168-470: A single fee payment. With this new product, Browning and his brother Matthew sought royalties based upon unit sales, rather than a single front-end fee payment. If the new shotgun became highly successful, the Browning company stood to make substantially more income. Winchester management, which had agreed to royalties for an earlier Browning shotgun design that was never manufactured, now refused to accede to

1241-433: A single shell that could be easily loaded from the breech of a firearm. The introduction of such a technology led to the implementation of the firing pin and hammer system that is even now still used in certain designs. Whereas the percussion cap in the caplock mechanism was external, the percussion cap in a self-contained cartridge is inside the breech. It is therefore necessary to use a firing pin (a thin rod) to strike

1314-439: A staggered-column, single-cartridge feed design, and slight damage to the feed lips or debris in the magazine would render the magazine unusable. A partial solution to the magazine problem was the later introduction of a single-column magazine that reduced the capacity from 20 to 12 rounds. The Reising earned a dismal reputation for reliability in the combat conditions of Guadalcanal. The M1 carbine eventually became available and

1387-403: Is a part of a firearm that is used to strike the percussion cap / primer , or a separate firing pin , to ignite the propellant and fire the projectile. It is so called because it resembles a hammer in both form and function. The hammer itself is a metal piece that forcefully rotates about a pivot point. The term tumbler can refer to a part of the hammer or a part mechanically attached to

1460-408: Is a type of firing pin operated by the direct action of a spring rather than by a hammer striking the firing pin. Striker-operated firearms lack a hammer. There are some notable drawbacks to the external hammer system compared to other modern, internal designs. In single-action revolvers , specifically, there is an ever-present danger of accidentally discharging the weapon if the hammer is struck with

1533-419: Is distinguished by five cartridge peep holes on the left side, a feature eliminated on the second model to prevent mud and sand from entering. In contrast, the third model is parkerized, has two long indentations on the sides to reduce its capacity to a twelve-shot single column magazine because of feeding problems experienced with former models. Production of the Model 50 and 55 submachine guns ceased in 1945 at

SECTION 20

#1732786666963

1606-604: The Browning Citori made in Asia, continue to be manufactured into the 21st century and come with varying grades of fine hand engraving and premium quality wood. Throughout his life, Browning designed a vast array of military and civilian small arms for his own company, as well as for Winchester , Colt , Remington , Savage , Stevens , and Fabrique Nationale de Herstal of Belgium. Browning firearms have been made, both licensed and unlicensed, by hundreds of factories around

1679-485: The 1st Marine Division stormed the beaches of Guadalcanal , in the Solomon Islands . The same date of Guadalcanal's invasion, the Model 50 and 55 saw action with the 1st Marine Raiders on the small outlying islands of Tulagi and Tanambogo to the north. Two companies of Marine paratroopers also used Model 55s, to attack the island of Gavutu, between Tulagi and Tanambogo. Paramarines and armored crewmen were issued

1752-684: The Auto-5 ) and the new Model 1912 pump shotgun, which was based in small part upon design features of the earlier Browning-designed Winchester Model 1897 shotgun. This shift marked the end of an era of Winchester-Browning collaboration. John Browning was known as a dedicated and tireless innovator and experimenter who sought breakthrough consumer-oriented features and performance and reliability improvements in small arms designs. He did not retire in his later years but dedicated his entire adult life – literally to his last day – to these pursuits. On November 26, 1926, while working at

1825-555: The Brownings' terms. Remington Arms also was approached but the president of the company died of a heart attack while the Brownings were waiting to offer him the gun. Remington would later produce a copy of the Auto-5 as the Model 11 which was used by the US Military and was also sold to the civilian market. Having recently successfully negotiated firearm licenses with Fabrique Nationale de Herstal of Belgium (FN), Browning took

1898-588: The Harrington & Richardson Arms Company (H&R) in Worcester, Massachusetts. It was accepted, and in March 1941, H&R started manufacturing the Model 50 submachine gun. Months later, production began on the Model 55, which was identical to the Model 50 other than having a folding wire buttstock, no compensator, and a 10.5 in (270 mm) barrel; and the Model 60 semiautomatic rifle that also resembled

1971-649: The Reising in November 1941 at Fort Benning, Georgia. During this test, several parts failed due to poor construction. Once this was corrected, a second test was made in 1942 at Aberdeen Proving Ground, Maryland. In that test, 3,500 rounds were fired, resulting in two malfunctions: one from the ammunition, the other from a bolt malfunction. As a result, the Army didn't adopt the Reising, but the Navy and Marines did, due to insufficient supply of Thompsons. The Reising submachine gun

2044-546: The Reising's selective-fire capability, semi-auto accuracy, and low cost relative to a Thompson. Then, faced with continued demand, H&R resumed production of the Model 50 in 1950 which sputtered to a halt in 1957 with nearly 5,500 additional submachine guns manufactured. But just when the Reising story seemed to end, a final foreign order was received in the 1960s for nearly 2,000 more Model 60s. Decades later, in 1986, H&R closed their doors and Numrich Arms (aka Gun Parts Corporation) purchased their entire inventory. Acquiring

2117-668: The Reising, two selective fire models: the M50 and M55 , and two semi-automatic only variants: the M60 , a .45 ACP carbine, and the M65 , chambered for the .22 Long Rifle rimfire cartridge designed for training purposes. There were two differences between the M50 and the M55, those being the elimination of the compensator and the addition of a folding wire buttstock making the M55 lighter and shorter. M55

2190-604: The Thompson could not be radically lightened without a deterioration in its controllability, as a heavy gun was necessary in automatic fire, to counteract and stabilize the effects on control and accuracy of its heavy bolt moving back and forwards. The Reising's bolt is much lighter due to its delayed blowback mechanism being the main determinant of the automatic rate of fire; and consequently the whole gun could be correspondingly light without detracting from accuracy and controllability. The M50 Reising's delayed blowback operation, often classified as hesitation lock , works as follows: as

2263-400: The Thompson, particularly in semi-automatic mode, the Reising had a tendency to jam. The problem with the Reising's form of delayed blowback was the recess in which the bolt lodged when in battery. If this accumulated dirt or fouling these could prevent the bolt from seating in it properly; and if this happened the trigger disconnector automatically prevented firing. In addition, the magazine was

M50 Reising - Misplaced Pages Continue

2336-549: The U.S.'s standard military side arm until 1986; a variant is still used by special operations units of the United States Marine Corps and the design remains very popular among civilian shooters and some police departments. The Browning Hi-Power has had a similarly lengthy period of military service outside the United States. The .50 caliber M2 Browning machine gun – the enduring "Ma Deuce" –

2409-437: The age of seven, where he was taught basic engineering and manufacturing principles, and encouraged to experiment with new concepts. He developed his first rifle, a single-shot falling block action design while he was still his father's apprentice, then, in 1878, in partnership with his younger brother, co-founded John Moses and Matthew Sandefur Browning Company, later renamed Browning Arms Company . The company began producing

2482-538: The bench on a self-loading pistol design for Fabrique Nationale de Herstal (FN) in Liège , he died of heart failure in the design shop of his son Val A. Browning . Even the 9 mm semi-automatic pistol he was working on when he died had great design merit and was eventually completed in 1935 by Belgian designer Dieudonné Saive . Released as the Fabrique Nationale GP35, it was more popularly known as

2555-489: The bore axis rather than pivoting around a pin placed perpendicular to the bore, as with the more common rotating hammer. The hammer then impacts the rear of the firing pin. Firearms using this arrangement offer the advantage of using an open-bolt fire only bolt if required similar to that of a return spring . Designs such as the American M1895 Colt–Browning machine gun , M50 Reising and Winchester Liberator ,

2628-617: The brothers' designs and other non-military firearms. By 1882, the company employed John and Matthew's half-brothers Jonathan (1859–1939), Thomas (1860–1943), William (1862–1919), and George (1866–1948). Like his father, Browning was a member of The Church of Jesus Christ of Latter-day Saints, and served a two-year mission in Georgia beginning on March 28, 1887. He married Rachel Theresa Child (September 14, 1860 – September 30, 1934) on April 10, 1879, in Ogden, Weber County, Utah Territory, and

2701-405: The cartridge is chambered, the rear end of the bolt is pushed up into a recess, in a manner similar to tilting-bolt locked breech guns; but whereas such weapons rely on an additional mechanism to unlock them, in the case of the Reising the end of the bolt that pushes against the back wall of this recess, is subtly rounded, while the wall is correspondingly curved. On firing, the extreme pressure from

2774-439: The cock was held rearward under spring tension. Pulling the trigger allowed the cock to rotate forward at a speed sufficient to produce sparks when it struck the steel frizzen . This ignited a small priming charge in the external flash pan , which in turn ignited the propellent charge in the breech through a connecting vent hole. The identification of percussion sensitive fulminates provided an alternative to spark ignition of

2847-426: The commercial blued finish, and the difficulty in keeping the weapon clean enough to function properly. Tests at Aberdeen Proving Ground and at Fort Benning, Georgia, had found difficulties in blindfold reassembly of the Reising, indicating the design was complicated and difficult to maintain. The producer, H&R, had not yet mastered mass-production technologies in 1940-1941, and many of the parts were hand fitted at

2920-567: The couple had 10 children, two of whom died in infancy. Production examples of the Browning Model 1878 Single Shot Rifle caught the attention of the Winchester Repeating Arms Company , who dispatched a representative to evaluate the competition. Winchester bought the design for $ 8,000 and moved production to their Connecticut factory. From 1883, Browning worked in partnership with Winchester and designed

2993-428: The end of World War II. Nearly 120,000 submachine guns were made of which two-thirds went to the Marines. H&R continued production of the Model 60 semiautomatic rifle in hopes of domestic sales, but with little demand, production of the Model 60 stopped in 1949 with over 3,000 manufactured. H&R sold their remaining inventory of submachine guns to police and correctional agencies across America who were interested in

M50 Reising - Misplaced Pages Continue

3066-459: The factory just like the company did with their commercial firearms; this lack of parts interchangeability was not a problem for a civilian security or police firearm, and the Marines had to accept it in order to get the weapons quickly, but it was very problematic when Reisings were maintained in the field under combat conditions; the Marines were not told not to mix up the parts during communal cleaning, as they were used to. While more accurate than

3139-421: The firing mechanism are mounted between the sides that form the frame. While not unique, percussion and flint-locks more typically use a side-lock firing mechanism, with the components mounted either side of the mounting plate. The caplock was in wide use for almost five decades until the widespread introduction of the self-contained cartridge which contained the projectile, gunpowder, and percussion cap all in

3212-565: The first reliable and compact autoloading pistols by inventing the telescoping bolt , then integrating the bolt and barrel shroud into what is known as the pistol slide . Browning's telescoping bolt design is now found on nearly every modern semi-automatic pistol , as well as several modern fully automatic weapons. He also developed the first gas-operated firearm, the Colt–Browning Model 1895 machine gun  – a system that surpassed mechanical recoil operation to become

3285-518: The folding stock M55, and this version included a notable flaw: its wire-frame stock was poorly designed, crude and flimsy, and had a tendency to fold while firing. Moreover, other serious shortcomings in both guns were becoming apparent. The reality was that the Reising was designed as a civilian police weapon and was not suited to the stresses of harsh battle conditions encountered in the Solomon Islands—namely, sand, saltwater that easily rusted

3358-529: The forearm. In addition, it was more accurate both in semi-auto and at the onset of automatic fire, because due to it being a closed bolt gun, only the linear hammer and firing pin moved at the moment the trigger was squeezed, whereas the Thompson slammed home a heavy bolt and actuator. The Reising was made in selective fire versions that could be switched between semi-automatic or full-automatic fire as needed and in semi-auto only versions to be used for marksmanship training and police and guard use. The Reising had

3431-413: The hammer may snag on clothing and cause the loss of seconds in a dangerous situation. Paul B. Weston, an authority on police weapons, called the external a "fish hook" that tended to snag clothing during a fast draw. A linear hammer is similar to but differs from a striker in that the hammer is a separate component from the firing pin. When released, a linear hammer, under spring pressure, slides along

3504-409: The hammer resting on an empty chamber to minimize the risk of accidental discharge. Additionally, for those who carry their firearm as a personal defense weapon, there is the ever-present worry that an external hammer may catch on a loose article of clothing in an emergency situation, because the hammer protrudes at an angle from the rear of the weapon, and as the owner moves to quickly draw their weapon,

3577-544: The increased issue of the .30-caliber M1 carbine, the U.S. government passed some Reising submachine guns to the OSS and to various foreign governments (as Lend-Lease aid). Canada purchased some Model 50 SMGs and these were issued to 2nd Battalions in Canada where the 1st Battalions of regiments were serving overseas. They were issued along with .30-06 M1917 Enfields and .30-06 Lewis machine guns . One such unit to receive them

3650-522: The late 19th century-early 20th century, Browning designs and Winchester firearms were synonymous and the collaboration was highly successful. This came to an end when Browning proposed a new long recoil operated semi-automatic shotgun design, a prototype finished in 1898, to Winchester management, which ultimately became the Browning Auto-5 shotgun. As was the custom of the time, Browning's earlier designs had been sold exclusively to Winchester for

3723-467: The moment before shooting gives better accuracy, both for semi-automatic and at the onset of full automatic fire. Less advantageously though, this more accurate firepower was somewhat limited due to the 20-round capacity of its largest magazine. The U.S. Marines adopted the Reising in 1941 with 4,200 authorized per division with approximately 500 authorized per each infantry regiment. Most Reisings were originally issued to Marine officers and NCOs in lieu of

SECTION 50

#1732786666963

3796-680: The most copied firearms in the world. Browning's father Jonathan —who was among the thousands of pioneers of the Church of Jesus Christ of Latter-day Saints who made an exodus from Nauvoo, Illinois , to Utah —established a gunsmith shop in Ogden in 1852. As was common in the Latter-day Saint community at the time, Jonathan Browning was a polygamist , having taken three wives. He fathered 22 children, including John Moses, and raised two stepdaughters with his wife Elizabeth Caroline Clark. Browning worked in his father's Ogden shop from

3869-478: The new shotgun design to FN; the offer was accepted and FN manufactured the new shotgun, honoring its inventor, as the Browning Auto-5. The Browning Auto-5 was continuously manufactured as a highly popular shotgun throughout the 20th century. In response, Winchester shifted reliance away from John Browning designs when it adopted a shotgun design of Thomas Crossley Johnson for the new Winchester Model 1911 SL, (Johnson had to work around Browning's patents of what became

3942-412: The pivot-point of the hammer, depending on the particular firearm under discussion (see half-cock ). According to one source the term tumbler is synonymous with hammer. In the development of firearms, the flintlock used flint striking steel to produce sparks and initiate firing by igniting the gunpowder used as a propellant. The flint was fixed to a swinging arm called the cock . Prior to firing,

4015-499: The primer through a small penetration in the breech and cause firing. An external hammer is one that can be accessed by the operator during use. This allows the hammer to be manually cocked or eased (uncocked) without firing. The hammer is designed with a spur (extension) to facilitate manual operation. An internal hammer cannot be accessed manually during operation. Pistols and shotguns in particular, which have an internal hammer may be referred to as being hammerless . A striker

4088-486: The propellant gases is thereby able to force the bolt-end down, back to the horizontal. From here the bolt can move to the rear removing the cartridge from the chamber; but the combination of mechanical disadvantage and friction the force of the gases must overcome to push the end of the bolt down has achieved a delay of a fraction of a second, allowing pressure in the barrel to drop to a level sufficiently low for safe and efficient cartridge extraction. The Reising fired from

4161-500: The propellant. The percussion lock (also caplock) was adapted from the flintlock firing mechanism, with the cock being modified to strike a small cup-like cap containing percussive material. The cap was placed over an external nipple , which acts as an anvil and conduit to ignite the main propellant charge within the breech. In this use, the cock has come to be termed a hammer . Samuel Colt 's Colt Paterson revolver of 1836 used percussion caps. The hammer and other components of

4234-401: The retaining screw wasn't tightly secured. The weapon was susceptible to jamming if grime clogged the bolt's locking recess in the receiver. The two small magazine guide retaining pins and corresponding receiver stud holes were tapered allowing disassembly and assembly only from one direction—right to left for disassembly, and left to right for assembly; adding unacceptable levels of complexity in

4307-557: The so-called commercial from the military model, the commercial model is usually blued. It commonly has a fixed front sight and a rear sight with no retaining screw. It often has 28 fins on the barrel, a one piece magazine release, no outward flanges on the safety/selector switch, and no sling swivels. Lastly, the commercial model commonly has a smooth take-down screw, a two-hole trigger guard, and serial numbers ranging from one to 20,000. Military Reisings are usually parkerized . They often have an adjustable front sight with an Allen screw and

4380-809: The standard for most high-power self-loading firearm designs worldwide. He also made significant contributions to automatic cannon development. Browning's most successful designs include the M1911 pistol , the water-cooled M1917 , the air-cooled M1919 , and heavy M2 machine guns, the M1918 Browning Automatic Rifle , and the Browning Auto-5  – the first semi-automatic shotgun . Some of these arms are still manufactured, often with only minor changes in detail and cosmetics to those assembled by Browning or his licensees. The Browning-designed M1911 and Hi-Power are some of

4453-524: The submachine gun the light rifle uses a gas piston, it was built in semi-automatic and fully automatic versions and issued with a 12 round magazine. The Reising entered military service primarily because of uncertainty of supply of sufficient quantities of the Thompson submachine gun . In the testing stage, it won out over some other competing designs. It was very light and quite accurate in aimed fire, and "capable of intensive fire against personnel within

SECTION 60

#1732786666963

4526-507: The successful Browning Hi-Power pistol, a favorite of sportsmen and gun collectors as well as many military and law enforcement agencies around the world. The premium-priced Browning Superposed shotgun, an over-under shotgun design, was his last completed firearm design. It was marketed originally with twin triggers; a single trigger modification was later completed by his son, Val Browning. Commercially introduced in 1931 by FN, Browning Superposed shotguns, and their more affordable cousins,

4599-718: The world. Browning Arms Company was established in 1927, the year after Browning's death on November 26, 1926, in Liège, Belgium. In 1977, FN Herstal acquired the company. The M1895 Machine Gun saw action in the Spanish–American War with the United States Marine Corps. The Colt M1911 , Browning 1917/19 , and the BAR saw action with US forces in World War I , World War II , and the Korean War . The M1911 went on to serve as

4672-424: Was delayed blowback , but the Thompson's Blish lock system was far less mechanically effective and so, like a simple blowback weapon, the Thompson was dependent on high bolt mass or more specifically bolt inertia to provide an acceptably low rate of fire. That is, a lighter bolt, as used in earlier models of the Thompson, would have reciprocated faster and produced too great a firing speed. This in turn meant that

4745-501: Was awarded the first of his 128 firearm patents on October 7, 1879, at the age of 24. He is regarded as one of the most successful firearms designers of the 19th and 20th centuries and a pioneer of modern repeating , semi-automatic , and automatic firearms. Browning influenced nearly all categories of firearms design, especially the autoloading of ammunition. He invented, or made significant improvements to, single-shot, lever-action , and pump-action rifles and shotguns. He developed

4818-632: Was developed as a sub-caliber training rifle version of the M60, produced only from 1944 to 1946. H&R later made updates to the M65 and sold them on the civilian market (and to the Marines in small numbers) as the MC-58 and M150/151/165 Leatherneck. From the submachine gun the .30 carbine light rifle prototype was developed, it was competing to become the M1 carbine but lost to Winchester . While sharing many parts with

4891-584: Was developed in 1918, entered service with the US Armed Forces in 1921, and has remained in active service for over a century with militaries across the world in a variety of roles. The 37mm M4 autocannon was initially designed by Browning in 1921 and entered service in 1938; it was used both in aircraft and on U.S. Navy PT boats during World War II. Several of Browning's designs are still in production today. Some of his most notable designs include: Hammer (firearms)#Linear hammer The hammer

4964-433: Was far less costly ($ 62) compared to the Thompson ($ 200). It was much lighter (seven vs. eleven pounds). The Model 55 was also more compact (about twenty-two vs. thirty-three inches in length). The Reising cost less than the Thompson because its metal components were mostly stampings instead of machined parts. This also allowed it to be lighter, as did its firing mechanism . Like the 1928A1 Thompson, its operating principle

5037-529: Was innovative for its time. In comparison to its main rival, the famous Thompson, it possessed similar firepower, better accuracy, excellent balance, a lighter weight, a much lower cost, and greater ease of manufacture. Despite these achievements, the poor combat performance of the Reising—contrasted with favorable combat and law enforcement use of the Thompson—mired the weapon in controversy. The Reising

5110-678: Was justifiably proud of the Reising's superior accuracy and balance, lighter weight, and ease of manufacturing when compared to the Thompson. However, the Reising's close tolerances and delicate magazine proved unreliable in the sand and mud of the Solomons, unless kept scrupulously clean. The gun quickly became despised by front-line Marines, and Lieutenant Colonel Merritt A. Edson , Commander, 1st Marine Raider Battalion, ordered that his troops' Reisings be flung into Guadalcanal's crocodile-infested Lunga River , as his troops resorted to reliable bolt-action M1903 Springfield rifles. This failure made

5183-475: Was often chosen over both the Reising and the Thompson in the wet tropical conditions, as the M1928 Thompson's built-in oiling pads in the receiver were a liability. In late 1943 following numerous complaints, the Reising was withdrawn from Fleet Marine Force (FMF) units and assigned to Stateside guard detachments and ship detachments. After the Marines proved reluctant to accept more Reisings, and with

5256-492: Was originally issued to Marine parachute infantry and armored vehicle crews. The M60 was a long-barreled, semi-automatic carbine model designed primarily for military training and police use. However, few of these were ever sold. The Marines used M60s for training, guard duty, and other non-combat roles. Some M60s were believed to have been issued to Marine officers at Guadalcanal . The remaining guns were passed on to State Guards and civilian law enforcement agencies. The M65

5329-616: Was the 2nd Bn, Seaforth Highlanders of Canada . The Veteran's Guard of Canada were issued the weapon to guard German prisoners of war. Others were given to various anti-Axis resistance forces operating around the world. Many Reisings (particularly the semiautomatic M60 rifle) were issued to State Guards for guarding war plants, bridges, and other strategic resources. After the war, thousands of Reising Model 50 submachine guns were acquired by state, county, and local U.S. law enforcement agencies. The weapon proved much more successful in this role, in contrast to its wartime reputation. H&R

#962037