Misplaced Pages

#462537

64-453: The Continental IO-550 engine is a large family of 9 liter fuel injected six-cylinder, horizontally opposed, air-cooled aircraft engines that were developed for use in light aircraft by Teledyne Continental Motors . The first IO-550 was delivered in 1983 and the type remains in production. The IOF-550 is an Aerosance FADEC equipped version of the same basic engine, the TSIO-550 is

128-405: A hot-bulb engine used a 'jerk pump' to dispense fuel oil at high pressure to an injector. Another development in early diesel engines was the pre-combustion chamber, which was invented in 1919 by Prosper l'Orange to avoid the drawbacks of air-blast injection systems. The pre-combustion chamber made it feasible to produce engines in size suitable for automobiles and MAN Truck & Bus presented

192-432: A mass-production basis, which limited them to a number of specialised applications. The MOSFET was invented at Bell Labs between 1955 and 1960. It was the first truly compact transistor that could be miniaturised and mass-produced for a wide range of uses. Its advantages include high scalability , affordability, low power consumption, and high density . It revolutionized the electronics industry , becoming

256-403: A radio antenna , practicable. Vacuum tubes (thermionic valves) were the first active electronic components which controlled current flow by influencing the flow of individual electrons , and enabled the construction of equipment that used current amplification and rectification to give us radio , television , radar , long-distance telephony and much more. The early growth of electronics

320-632: A spark plug . The Cummins Model H diesel truck engine was introduced in America in 1933. In 1936, the Mercedes-Benz OM 138 diesel engine (using a precombustion chamber) became one of the first fuel-injected engines used in a mass-production passenger car. During World War II , several petrol engines for aircraft used direct-injection systems, such as the European Junkers Jumo 210 , Daimler-Benz DB 601 , BMW 801 , and

384-454: A carburettor. Many of the carburettor's supporting components—such as the air filter, intake manifold, and fuel line routing—could be used with few or no changes. This postponed the redesign and tooling costs of these components. Single-point injection was used extensively on American-made passenger cars and light trucks during 1980–1995, and in some European cars in the early and mid-1990s. In the US,

448-581: A central injector instead of multiple injectors. Single-point injection (also called 'throttle-body injection') uses one injector in a throttle body mounted similarly to a carburettor on an intake manifold . As in a carburetted induction system, the fuel is mixed with the air before entering the intake manifold. Single-point injection was a relatively low-cost way for automakers to reduce exhaust emissions to comply with tightening regulations while providing better "driveability" (easy starting, smooth running, no engine stuttering) than could be obtained with

512-626: A dual turbocharged version and the TSIOL-550 is a liquid-cooled variant. There is no O-550 engine, which would be a carburetor-equipped variant, hence the base model is the IO-550. This engine family competes with the Lycoming IO-580 series which are also six-cylinder engines with similar power output and weight. The IO-550 family of engines was developed from the IO-520 series, with

576-572: A fuel injection system are described in the following sections. In some systems, a single component performs multiple functions. Fuel injection is operated by spraying pressurised fuel into the engine. Therefore a device to pressurise the fuel is needed, such as a fuel pump. The system must determine the appropriate amount of fuel to be supplied and control the fuel flow to supply this amount. Several early mechanical injection systems used relatively sophisticated helix-controlled injection pump(s) that both metered fuel and created injection pressure. Since

640-728: A fuel injection system in 1941 and by 1956 it was used in the Jaguar racing cars. At the 1957 24 Hours of Le Mans , the 1st to 4th placed cars were Jaguar D-Type entries using a Lucas fuel injection system. Also in 1957, General Motors introduced the Rochester Ramjet option, consisting of a fuel injection system for the V8 engine in the Chevrolet Corvette. During the 1960s, fuel injection systems were also produced by Hilborn , SPICA and Kugelfischer . Up until this time,

704-418: A leading role in the field of microwave and high power transmission as well as television receivers until the middle of the 1980s. Since then, solid-state devices have all but completely taken over. Vacuum tubes are still used in some specialist applications such as high power RF amplifiers , cathode-ray tubes , specialist audio equipment, guitar amplifiers and some microwave devices . In April 1955,

SECTION 10

#1732790833463

768-566: A mix of the two types. Analog circuits are becoming less common, as many of their functions are being digitized. Analog circuits use a continuous range of voltage or current for signal processing, as opposed to the discrete levels used in digital circuits. Analog circuits were common throughout an electronic device in the early years in devices such as radio receivers and transmitters. Analog electronic computers were valuable for solving problems with continuous variables until digital processing advanced. As semiconductor technology developed, many of

832-580: A passenger car was released the following year, in the Mercedes-Benz 300SL sports car. However the engine suffered lubrication problems due to petrol diluting the engine oil, and subsequent Mercedes-Benz engines switched to a manifold injection design. Likewise, most petrol injection systems prior to the 2000s used the less-expensive manifold injection design. Throughout the 1950s, several manufacturers introduced their manifold injection systems for petrol engines. Lucas Industries had begun developing

896-540: A physical space, although in more recent years the trend has been towards electronics lab simulation software , such as CircuitLogix , Multisim , and PSpice . Today's electronics engineers have the ability to design circuits using premanufactured building blocks such as power supplies , semiconductors (i.e. semiconductor devices, such as transistors), and integrated circuits. Electronic design automation software programs include schematic capture programs and printed circuit board design programs. Popular names in

960-483: A pulsed flow system which used an air flow meter to calculate the amount of fuel required. L-Jetronic was widely adopted on European cars during the 1970s and 1980s. As a system that uses electronically-controlled fuel injectors which open and close to control the amount of fuel entering the engine, the L-Jetronic system uses the same basic principles as modern electronic fuel injection (EFI) systems. Prior to 1979,

1024-399: A sophisticated common-rail injection system. The latter is the most common system in modern automotive engines. During the 20th century, most petrol engines used either a carburettor or indirect fuel injection. Use of direct injection in petrol engines has become increasingly common in the 21st century. In a common rail system, fuel from the fuel tank is supplied to a common header (called

1088-413: Is always intermittent (either sequential or cylinder-individual). This can be done either with a blast of air or hydraulically, with the latter method being more common in automotive engines. Typically, hydraulic direct injection systems spray fuel into the air inside the cylinder or combustion chamber. Direct injection can be achieved with a conventional helix-controlled injection pump, unit injectors, or

1152-546: Is called a manifold injection system. There exist two types of manifold injection systems: multi-point injection (or port injection) and single-point injection (or throttle body injection). Internal mixture formation systems can be separated into several different varieties of direct and indirect injection, the most common being the common-rail injection system, a variety of direct injection. The term "electronic fuel injection" refers to any fuel injection system controlled by an engine control unit . The fundamental functions of

1216-548: Is defined as unwanted disturbances superposed on a useful signal that tend to obscure its information content. Noise is not the same as signal distortion caused by a circuit. Noise is associated with all electronic circuits. Noise may be electromagnetically or thermally generated, which can be decreased by lowering the operating temperature of the circuit. Other types of noise, such as shot noise cannot be removed as they are due to limitations in physical properties. Many different methods of connecting components have been used over

1280-533: Is injected at the same time to all the cylinders; or cylinder-individual , in which the engine control unit can adjust the injection for each cylinder individually. Multi-point injection (also called 'port injection') injects fuel into the intake ports just upstream of each cylinder's intake valve , rather than at a central point within an intake manifold. Typically, multi-point injected systems use multiple fuel injectors, but some systems, such as GM's central port injection system, use tubes with poppet valves fed by

1344-484: Is the introduction of fuel in an internal combustion engine , most commonly automotive engines , by the means of a fuel injector. This article focuses on fuel injection in reciprocating piston and Wankel rotary engines. All compression-ignition engines (e.g. diesel engines ), and many spark-ignition engines (i.e. petrol (gasoline) engines , such as Otto or Wankel ), use fuel injection of one kind or another. Mass-produced diesel engines for passenger cars (such as

SECTION 20

#1732790833463

1408-595: Is the voltage comparator which receives a continuous range of voltage but only outputs one of two levels as in a digital circuit. Similarly, an overdriven transistor amplifier can take on the characteristics of a controlled switch , having essentially two levels of output. Analog circuits are still widely used for signal amplification, such as in the entertainment industry, and conditioning signals from analog sensors, such as in industrial measurement and control. Digital circuits are electric circuits based on discrete voltage levels. Digital circuits use Boolean algebra and are

1472-448: Is therefore the process of defining and developing complex electronic devices to satisfy specified requirements of the user. Due to the complex nature of electronics theory, laboratory experimentation is an important part of the development of electronic devices. These experiments are used to test or verify the engineer's design and detect errors. Historically, electronics labs have consisted of electronics devices and equipment located in

1536-624: The IBM 608 was the first IBM product to use transistor circuits without any vacuum tubes and is believed to be the first all-transistorized calculator to be manufactured for the commercial market. The 608 contained more than 3,000 germanium transistors. Thomas J. Watson Jr. ordered all future IBM products to use transistors in their design. From that time on transistors were almost exclusively used for computer logic circuits and peripheral devices. However, early junction transistors were relatively bulky devices that were difficult to manufacture on

1600-415: The Mercedes-Benz OM 138 ) became available in the late 1930s and early 1940s, being the first fuel-injected engines for passenger car use. In passenger car petrol engines, fuel injection was introduced in the early 1950s and gradually gained prevalence until it had largely replaced carburetors by the early 1990s. The primary difference between carburetion and fuel injection is that fuel injection atomizes

1664-564: The Shvetsov ASh-82FN (M-82FN) . The German direct-injection systems were based on diesel injection systems used by Bosch, Deckel, Junkers and l'Orange. By around 1943, the Rolls-Royce Merlin and Wright R-3350 had switched from traditional carburettors to fuel-injection (called "pressure carburettors" at the time), however these engines used throttle body manifold injection , rather than the direct-injection systems of

1728-564: The Volkswagen 1.4 FSI engine introduced in 2000. However, the stratified charge systems were largely no longer in use by the late 2010s, due to increased exhaust emissions of NOx gasses and particulates, along with the increased cost and complexity of the systems. Electronics Electronic devices have hugely influenced the development of many aspects of modern society, such as telecommunications , entertainment, education, health care, industry, and security. The main driving force behind

1792-479: The Wankel engine . In a manifold injection system, air and fuel are mixed outside the combustion chamber so that a mixture of air and fuel is sucked into the engine. The main types of manifold injections systems are multi-point injection and single-point injection . These systems use either a continuous injection or an intermittent injection design. In a continuous injection system, fuel flows at all times from

1856-669: The accumulator ), and then sent through tubing to the injectors, which inject it into the combustion chamber. The accumulator has a high-pressure relief valve to maintain pressure and return the excess fuel to the fuel tank. The fuel is sprayed with the help of a nozzle that is opened and closed with a solenoid-operated needle valve . Third-generation common rail diesels use piezoelectric injectors for increased precision, with fuel pressures up to 300  MPa or 44,000  psi . The types of common-rail systems include air-guided injection and spray-guided injection . Used by diesel engines, these systems include: This injection method

1920-459: The electron in 1897 by Sir Joseph John Thomson , along with the subsequent invention of the vacuum tube which could amplify and rectify small electrical signals , inaugurated the field of electronics and the electron age. Practical applications started with the invention of the diode by Ambrose Fleming and the triode by Lee De Forest in the early 1900s, which made the detection of small electrical voltages, such as radio signals from

1984-437: The throttle body . Fuel injectors which also control the metering are called "injection valves", while injectors that perform all three functions are called unit injectors . Direct injection means that the fuel is injected into the main combustion chamber of each cylinder. The air and fuel are mixed only inside the combustion chamber. Therefore, only air is sucked into the engine during the intake stroke. The injection scheme

Continental IO-550 - Misplaced Pages Continue

2048-557: The 1950 Goliath GP700 small saloon, it was also added to the Gutbrod Superior engine in 1952. This mechanically-controlled system was essentially a specially lubricated high-pressure diesel direct-injection pump of the type that is governed by the vacuum behind an intake throttle valve. A Bosch mechanical direct-injection system was also used in the straight-eight used in the 1954 Mercedes-Benz W196 Formula One racing car. The first four-stroke direct-injection petrol engine for

2112-428: The 1954-1959 Mercedes-Benz 300 SL - all used manifold injection (i.e. the injectors located at the intake ports or throttle body, instead of inside the combustion chamber). This began to change when the first mass-produced petrol direct injection system for passenger cars was a common rail system introduced in the 1997 Mitsubishi 6G74 V6 engine. The first common-rail system for a passenger car diesel engine

2176-448: The 1960s, U.S. manufacturers were unable to compete with Japanese companies such as Sony and Hitachi who could produce high-quality goods at lower prices. By the 1980s, however, U.S. manufacturers became the world leaders in semiconductor development and assembly. However, during the 1990s and subsequently, the industry shifted overwhelmingly to East Asia (a process begun with the initial movement of microchip mass-production there in

2240-538: The 1970s), as plentiful, cheap labor, and increasing technological sophistication, became widely available there. Over three decades, the United States' global share of semiconductor manufacturing capacity fell, from 37% in 1990, to 12% in 2022. America's pre-eminent semiconductor manufacturer, Intel Corporation , fell far behind its subcontractor Taiwan Semiconductor Manufacturing Company (TSMC) in manufacturing technology. By that time, Taiwan had become

2304-452: The 1980s, electronic systems have been used to control the metering of fuel. More recent systems use an electronic engine control unit which meters the fuel, controls the ignition timing and controls various other engine functions. The fuel injector is effectively a spray nozzle that performs the final stage in the delivery of fuel into the engine. The injector is located in the combustion chamber , inlet manifold or - less commonly -

2368-712: The EDA software world are NI Multisim, Cadence ( ORCAD ), EAGLE PCB and Schematic, Mentor (PADS PCB and LOGIC Schematic), Altium (Protel), LabCentre Electronics (Proteus), gEDA , KiCad and many others. Heat generated by electronic circuitry must be dissipated to prevent immediate failure and improve long term reliability. Heat dissipation is mostly achieved by passive conduction/convection. Means to achieve greater dissipation include heat sinks and fans for air cooling, and other forms of computer cooling such as water cooling . These techniques use convection , conduction , and radiation of heat energy . Electronic noise

2432-589: The Electrojector system, becoming the first cars known to use an electronic fuel injection (EFI) system. The Electrojector patents were subsequently sold to Bosch, who developed the Electrojector into the Bosch D-Jetronic . The D-Jetronic was produced from 1967-1976 and first used on the VW 1600TL/E . The system was a speed/density system, using engine speed and intake manifold air density to calculate

2496-500: The G10 engine in the 2000 Chevrolet Metro became the last engine available on an American-sold vehicle to use throttle body injection. In indirect-injected diesel engines (as well as Akroyd engines), there are two combustion chambers: the main combustion chamber, and a pre-chamber (also called an ante-chamber) that is connected to the main one. The fuel is injected only into the pre-chamber (where it begins to combust), and not directly into

2560-621: The German engines. From 1940, the Mitsubishi Kinsei 60 series engine used a direct-injection system, along with the related Mitsubishi Kasei engine from 1941. In 1943, a low-pressure fuel injection system was added to the Nakajima Homare Model 23 radial engine. The first mass-produced petrol direct-injection system was developed by Bosch and initially used in small automotive two-stroke petrol engines. Introduced in

2624-535: The advancement of electronics is the semiconductor industry , which in response to global demand continually produces ever-more sophisticated electronic devices and circuits. The semiconductor industry is one of the largest and most profitable sectors in the global economy, with annual revenues exceeding $ 481 billion in 2018. The electronics industry also encompasses other sectors that rely on electronic devices and systems, such as e-commerce, which generated over $ 29 trillion in online sales in 2017. The identification of

Continental IO-550 - Misplaced Pages Continue

2688-589: The amount of fuel to be injected. In 1974, Bosch introduced the K-Jetronic system, which used a continuous flow of fuel from the injectors (rather than the pulsed flow of the D-Jetronic system). K-Jetronic was a mechanical injection system, using a plunger actuated by the intake manifold pressure which then controlled the fuel flow to the injectors. Also in 1974, Bosch introduced the L-Jetronic system,

2752-409: The basis of all digital computers and microprocessor devices. They range from simple logic gates to large integrated circuits, employing millions of such gates. Digital circuits use a binary system with two voltage levels labelled "0" and "1" to indicated logical status. Often logic "0" will be a lower voltage and referred to as "Low" while logic "1" is referred to as "High". However, some systems use

2816-459: The circuit, thus slowing the computer. The invention of the integrated circuit by Jack Kilby and Robert Noyce solved this problem by making all the components and the chip out of the same block (monolith) of semiconductor material. The circuits could be made smaller, and the manufacturing process could be automated. This led to the idea of integrating all components on a single-crystal silicon wafer, which led to small-scale integration (SSI) in

2880-579: The diesel engine, but also improved it. He increased the air blast pressure from 4–5 kp/cm (390–490 kPa) to 65 kp/cm (6,400 kPa). In the meantime, the first manifold injection system was designed by Johannes Spiel in 1884, while working at Hallesche Maschinenfabrik in Germany. In 1891, the British Herbert-Akroyd oil engine became the first engine to use a pressurised fuel injection system. This design, called

2944-874: The early 1960s, and then medium-scale integration (MSI) in the late 1960s, followed by VLSI . In 2008, billion-transistor processors became commercially available. An electronic component is any component in an electronic system either active or passive. Components are connected together, usually by being soldered to a printed circuit board (PCB), to create an electronic circuit with a particular function. Components may be packaged singly, or in more complex groups as integrated circuits . Passive electronic components are capacitors , inductors , resistors , whilst active components are such as semiconductor devices; transistors and thyristors , which control current flow at electron level. Electronic circuit functions can be divided into two function groups: analog and digital. A particular device may consist of circuitry that has either or

3008-452: The electronic logic gates to generate binary states. Highly integrated devices: Electronic systems design deals with the multi-disciplinary design issues of complex electronic devices and systems, such as mobile phones and computers . The subject covers a broad spectrum, from the design and development of an electronic system ( new product development ) to assuring its proper function, service life and disposal . Electronic systems design

3072-411: The electronics in fuel injection systems used analogue electronics for the control system. The Bosch Motronic multi-point fuel injection system (also amongst the first systems where the ignition system is controlled by the same device as the fuel injection system) was the first mass-produced system to use digital electronics . The Ford EEC-III single-point fuel injection system, introduced in 1980,

3136-441: The first direct-injected diesel engine for trucks in 1924. Higher pressure diesel injection pumps were introduced by Bosch in 1927. In 1898, German company Deutz AG started producing four-stroke petrol stationary engines with manifold injection. The 1906 Antoinette 8V aircraft engine (the world's first V8 engine) was another early four-stroke engine that used manifold injection. The first petrol engine with direct-injection

3200-562: The following ways: The electronics industry consists of various sectors. The central driving force behind the entire electronics industry is the semiconductor industry sector, which has annual sales of over $ 481 billion as of 2018. The largest industry sector is e-commerce , which generated over $ 29 trillion in 2017. The most widely manufactured electronic device is the metal-oxide-semiconductor field-effect transistor (MOSFET), with an estimated 13   sextillion MOSFETs having been manufactured between 1960 and 2018. In

3264-655: The fuel injection systems had used a mechanical control system. In 1957, the American Bendix Electrojector system was introduced, which used analogue electronics for the control system. The Electrojector was intended to be available for the Rambler Rebel mid-size car, however reliability problems meant that the fuel injection option was not offered. In 1958, the Chrysler 300D , DeSoto Adventurer , Dodge D-500 and Plymouth Fury offered

SECTION 50

#1732790833463

3328-580: The fuel injectors, but at a variable flow rate. The most common automotive continuous injection system is the Bosch K-Jetronic system, introduced in 1974 and used until the mid-1990s by various car manufacturers. Intermittent injection systems can be sequential , in which injection is timed to coincide with each cylinder's intake stroke; batched , in which fuel is injected to the cylinders in groups, without precise synchronization to any particular cylinder's intake stroke; simultaneous , in which fuel

3392-633: The fuel through a small nozzle under high pressure, while carburetion relies on suction created by intake air accelerated through a Venturi tube to draw fuel into the airstream. The term "fuel injection" is vague and comprises various distinct systems with fundamentally different functional principles. Typically, the only thing all fuel injection systems have in common is a lack of carburetion . There are two main functional principles of mixture formation systems for internal combustion engines: internal mixture formation and external mixture formation. A fuel injection system that uses external mixture formation

3456-489: The functions of analog circuits were taken over by digital circuits, and modern circuits that are entirely analog are less common; their functions being replaced by hybrid approach which, for instance, uses analog circuits at the front end of a device receiving an analog signal, and then use digital processing using microprocessor techniques thereafter. Sometimes it may be difficult to classify some circuits that have elements of both linear and non-linear operation. An example

3520-503: The main combustion chamber. Therefore, this principle is called indirect injection. There exist several slightly different indirect injection systems that have similar characteristics. Types of indirect injection used by diesel engines include: In 1872, George Bailey Brayton obtained a patent on an internal combustion engine that used a pneumatic fuel injection system, also invented by Brayton: air-blast injection . In 1894, Rudolf Diesel copied Brayton's air-blast injection system for

3584-399: The most widely used electronic device in the world. The MOSFET is the basic element in most modern electronic equipment. As the complexity of circuits grew, problems arose. One problem was the size of the circuit. A complex circuit like a computer was dependent on speed. If the components were large, the wires interconnecting them must be long. The electric signals took time to go through

3648-540: The reverse definition ("0" is "High") or are current based. Quite often the logic designer may reverse these definitions from one circuit to the next as they see fit to facilitate their design. The definition of the levels as "0" or "1" is arbitrary. Ternary (with three states) logic has been studied, and some prototype computers made, but have not gained any significant practical acceptance. Universally, Computers and Digital signal processors are constructed with digital circuits using Transistors such as MOSFETs in

3712-541: The stroke increased from 4.00 to 4.25 inches, increasing the displacement to 552 in³ (9.05 L). The engine family covers a power range from 280 hp (209 kW) to 360 hp (268 kW). The engines were first developed in the early 1980s and first certified on a regulatory basis of FAR 33 , 1 February 1965 amendment, 33-8, 2 May 1977. The first IO-550 model was certified on 13 October 1983. Data from Type Certificate Data Sheet E3SO. Comparable engines Related lists Fuel injected Fuel injection

3776-762: The years. For instance, early electronics often used point to point wiring with components attached to wooden breadboards to construct circuits. Cordwood construction and wire wrap were other methods used. Most modern day electronics now use printed circuit boards made of materials such as FR4 , or the cheaper (and less hard-wearing) Synthetic Resin Bonded Paper ( SRBP , also known as Paxoline/Paxolin (trade marks) and FR2) – characterised by its brown colour. Health and environmental concerns associated with electronics assembly have gained increased attention in recent years, especially for products destined to go to European markets. Electrical components are generally mounted in

3840-424: Was a two-stroke aircraft engine designed by Otto Mader in 1916. Another early spark-ignition engine to use direct-injection was the 1925 Hesselman engine , designed by Swedish engineer Jonas Hesselman. This engine could run on a variety of fuels (such as oil, kerosene, petrol or diesel oil) and used a stratified charge principle whereby fuel is injected towards the end of the compression stroke, then ignited with

3904-407: Was another early digital fuel injection system. These and other electronic manifold injection systems (using either port injection or throttle-body injection ) became more widespread through the 1980s, and by the early 1990s they had replaced carburettors in most new petrol-engined cars sold in developed countries. The aforementioned injection systems for petrol passenger car engines - except for

SECTION 60

#1732790833463

3968-453: Was previously used in many diesel engines. Types of systems include: The M-System , used in some diesel engines from the 1960s to the 1980s, sprayed the fuel onto the walls of the combustion chamber, as opposed to most other direct-injection systems which spray the fuel into the middle of the chamber. Manifold injection systems are common in petrol-fuelled engines such as the Otto engine and

4032-473: Was rapid, and by the 1920s, commercial radio broadcasting and telecommunications were becoming widespread and electronic amplifiers were being used in such diverse applications as long-distance telephony and the music recording industry. The next big technological step took several decades to appear, when the first working point-contact transistor was invented by John Bardeen and Walter Houser Brattain at Bell Labs in 1947. However, vacuum tubes played

4096-473: Was the Fiat Multijet straight-four engine, introduced in the 1999 Alfa Romeo 156 1.9 JTD model. Since the 2010s, many petrol engines have switched to direct-injection (sometimes in combination with separate manifold injectors for each cylinder). Similarly, many modern diesel engines use a common-rail design. Stratified charge injection was used in several petrol engines in the early 2000s, such as

#462537