The Au Sable State Forest is a state forest in the north-central Lower Peninsula of Michigan . It is operated by the Michigan Department of Natural Resources .
54-550: The Au Sable State Forest is a byproduct of the lumbering boom in Michigan during the late 19th century. Many parcels of old growth timber were stripped of their largest trees. After forest fires had consumed the resulting detritus, the land had no economic value. Typically, it was sold to subsistence farmers or was reverted to the state in lieu of unpaid property taxes . Today, the Au Sable State Forest
108-652: A rip saw is the most common method, because sawing allows logs of lower quality, with irregular grain and large knots, to be used and is more economical. There are various types of sawing: Dimensional lumber is lumber that is cut to standardized width and depth, often specified in millimetres or inches (but see below for information on nominal dimensions vs. actual dimensions). Carpenters extensively use dimensional lumber in framing wooden buildings. Common sizes include 2×4 (pictured) (also two-by-four and other variants, such as four-by-two in Australia, New Zealand, and
162-462: A "class 1 flame spread rating of 25 or less, when tested in accordance with ASTM standard E 84," which means it burns more slowly than almost all treated wood lumber. A timber mark is a code beaten on to cut wood by a specially made hammer to show the logging licence. The basic understanding of lumber, or "sawn planks", came about in North America in the seventeenth century. Lumber is
216-400: A 1-inch-thick (25 mm) board, 8/4 (eight quarter) is a 2-inch-thick (51 mm) board, etc. This "quarter" system is rarely used for softwood lumber; although softwood decking is sometimes sold as 5/4, even though it is actually one inch thick (from milling 1 ⁄ 8 in or 3.2 mm off each side in a motorized planing step of production). The "quarter" system of reference is
270-534: A 10-foot-long (3.0 m) 2×4 ( 1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s ( 3 ⁄ 4 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length is considered re-sawing. Structural lumber may also be produced from recycled plastic and new plastic stock. Its introduction has been strongly opposed by the forestry industry. Blending fiberglass in plastic lumber enhances its strength, durability, and fire resistance. Plastic fiberglass structural lumber can have
324-472: A framer much time, because they are pre-cut by the manufacturer for use in 8-, 9-, and 10-foot ceiling applications, which means the manufacturer has removed a few inches or centimetres of the piece to allow for the sill plate and the double top plate with no additional sizing necessary. In the Americas, two-bys (2×4s, 2×6s, 2×8s, 2×10s, and 2×12s), named for traditional board thickness in inches, along with
378-399: A relatively small set of specified lengths; in all cases hardwoods are sold to the consumer by the board-foot (144 cubic inches or 2,360 cubic centimetres), whereas that measure is not used for softwoods at the retailer (to the cognizance of the buyer). Also in North America, hardwood lumber is commonly sold in a "quarter" system, when referring to thickness; 4/4 (four quarter) refers to
432-452: A timber is referred to as one "timber" (材), and the dimensions of other structural components were quoted in multiples of "timber"; thus, as the width of the actual timber varied, the dimensions of other components were easily calculated, without resorting to specific figures for each scale. The dimensions of timbers in similar applications show a gradual diminution from the Sui dynasty (580–618) to
486-443: A traditional North American lumber industry nomenclature used specifically to indicate the thickness of rough sawn hardwood lumber. In rough-sawn lumber it immediately clarifies that the lumber is not yet milled, avoiding confusion with milled dimension lumber which is measured as actual thickness after machining. Examples – 3 ⁄ 4 -inch, 19 mm, or 1x. In recent years architects, designers, and builders have begun to use
540-426: A unit of dimensional lumber is limited by the height and girth of the tree it is milled from. In general the maximum length is 24 ft (7.32 m). Engineered wood products, manufactured by binding the strands, particles, fibers, or veneers of wood, together with adhesives, to form composite materials, offer more flexibility and greater structural strength than typical wood building materials. Pre-cut studs save
594-679: A wall panel to accommodate electrical outlets and other devices coming out of the wall. Proper installation of prefabricated brick wall panels is crucial, as inadequate sealing presents an enormous risk of mold and water damage to underlying structural materials. Fire resistance is an important consideration in wall panel applications, particularly in public, commercial, and industrial buildings. Wall panels made from materials like gypsum board are often selected for their inherent fire-resistant properties. Other materials, such as PVC and WPC panels, can be treated with fire-retardant coatings to meet safety standards. Fire-resistant panels slow down
SECTION 10
#1732783372022648-491: Is a valuable asset to the state of Michigan. Much of it surrounds the fast-growing communities of Houghton Lake , Higgins Lake and Lake St. Helen adjacent to Interstate 75 . In addition, much of the forest is used for wildlife game management and the fostering of rare and endangered species, such as the Kirtland's warbler . Much of the area sits on the "Grayling outwash plain", a unique habitat. Two land parcels within
702-543: Is critical, such as trusses , rafters , laminating stock, I-beams and web joints. Machine grading measures a characteristic such as stiffness or density that correlates with the structural properties of interest, such as bending strength . The result is a more precise understanding of the strength of each piece of lumber than is possible with visually graded lumber, which allows designers to use full-design strength and avoid overbuilding. In Europe, strength grading of rectangular sawn lumber/timber (both softwood and hardwood)
756-633: Is done according to EN-14081 and commonly sorted into classes defined by EN-338. For softwoods, the common classes are (in increasing strength) C16, C18, C24, and C30. There are also classes specifically for hardwoods and those in most common use (in increasing strength) are D24, D30, D40, D50, D60, and D70. For these classes, the number refers to the required 5th percentile bending strength in newtons per square millimetre. There are other strength classes, including T-classes based on tension intended for use in glulam . Grading rules for African and South American sawn lumber have been developed by ATIBT according to
810-670: Is mainly used for construction framing , as well as finishing (floors, wall panels , window frames ). Lumber has many uses beyond home building. Lumber is referred to as timber in the United Kingdom, Europe, Australia, and New Zealand, while in other parts of the world (mainly the United States and Canada) the term timber refers specifically to unprocessed wood fiber , such as cut logs or standing trees that have yet to be cut. Lumber may be supplied either rough- sawn , or surfaced on one or more of its faces. Rough lumber
864-406: Is minimally 1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 inches (38 mm × 89 mm). As previously noted, less wood is needed to produce a given finished size than when standards called for the green lumber to be the full nominal dimension. However, even the dimensions for finished lumber of a given nominal size have changed over time. In 1910, a typical finished 1-inch (25 mm) board
918-559: Is more commonly made from softwood than hardwoods, and 80% of lumber comes from softwood. In the United States and Canada, milled boards are called lumber , while timber describes standing or felled trees. In contrast, in Britain, and some other Commonwealth nations and Ireland, the term timber is used in both senses. (In the UK, the word lumber is rarely used in relation to wood and has several other meanings.) Re-manufactured lumber
972-528: Is no set size limit for a piece of material fulfilling these functions, the maximum practical size for wall panels has been suggested to be about 0.6 to 2.4 m (2 to 8 ft), to allow for transportation. Decorative wall panels are also known as charcoal wall panels, PVC wall panels, WPC wall panels, charcoal louver panels, PVC louver panels, UV marble sheet, and WPC louver panels. They are Water-resistant, Termite Free, Borer Free, Durable, 12 mm thickness, Moisture-proof, UV grade, and Anti-static. South Korea
1026-603: Is required. Under the prescription of the Method of Construction (營造法式) issued by the Song dynasty government in the early twelfth century, timbers were standardized to eight cross-sectional dimensions. Regardless of the actual dimensions of the timber, the ratio between width and height was maintained at 1:1.5. Units are in Song dynasty inches (31.2 mm). Timber smaller than the 8th class were called "unclassed" (等外). The width of
1080-459: Is smaller than the nominal dimensions because modern technology makes it possible to use the logs more efficiently. For example, a "2×4" board historically started out as a green, rough board actually 2 by 4 inches (51 mm × 102 mm). After drying and planing, it would be smaller by a nonstandard amount. Today, a "2×4" board starts out as something smaller than 2 inches by 4 inches and not specified by standards, and after drying and planing
1134-422: Is still continued in some places. Otherwise, logs were sawn using a two-person whipsaw, or pit-saw, using saddleblocks to hold the log, and a pit for the pitman who worked below. In 1420 the island of Madeira – an archipelago comprising four islands off the northwest coast of Africa and an autonomous region of Portugal – was discovered. King Henry VI sent settlers to Madeira and
SECTION 20
#17327833720221188-526: Is the highest exporter of wall panels. Use of wall panels can reduce construction costs by providing a consistent appearance to the panelled surface without requiring the application of paint or another finishing material. Wall panels may be finished on only one side, if the other side is going to be against a brick or concrete wall, or a comparable structure. Alternately, the panels may, if assembled to an appropriate framework , substitute for having any other kind of wall at all. Holes may be cut or drilled into
1242-526: Is the raw material for furniture-making, and manufacture of other items requiring cutting and shaping. It is available in many species, including hardwoods and softwoods , such as white pine and red pine , because of their low cost. Finished lumber is supplied in standard sizes, mostly for the construction industry – primarily softwood , from coniferous species, including pine , fir and spruce (collectively spruce-pine-fir ), cedar , and hemlock , but also some hardwood, for high-grade flooring. It
1296-437: Is the result of secondary or tertiary processing of previously milled lumber. Specifically, it refers to lumber cut for industrial or wood-packaging use. Lumber is cut by ripsaw or resaw to create dimensions that are not usually processed by a primary sawmill . Re-sawing is the splitting of 1-to-12-inch (25–305 mm) hardwood or softwood lumber into two or more thinner pieces of full-length boards. For example, splitting
1350-605: Is well utilised in the construction industry. Attempts to maintain lumber quality over time have been challenged by historical changes in the timber resources of the United States – from the slow-growing virgin forests common over a century ago to the fast-growing plantations now common in today's commercial forests. Resulting declines in lumber quality have been of concern to both the lumber industry and consumers and have caused increased use of alternative construction products. Machine stress-rated and machine-evaluated lumber are readily available for end-uses where high strength
1404-517: The American Lumber Standard Committee , appointed by the U.S. Secretary of Commerce . Design values for most species and grades of visually graded structural products are determined in accordance with ASTM standards, which consider the effect of strength reducing characteristics, load duration, safety, and other influencing factors. The applicable standards are based on results of tests conducted in cooperation with
1458-728: The American colonies began in 1607 when the Jamestown settlers cut timber to build the first settlement in the new world. America's first sawmill was built at the Falls of Piscatauqua , on the line between the Province of Maine and the Province of New Hampshire , in 1634. Unauthenticated records, however, claim that as early as 1633 several mills were operating in New Netherland . The American colonies were essential to England in
1512-558: The USDA Forest Products Laboratory. Design Values for Wood Construction, which is a supplement to the ANSI/AF&;PA National Design Specification® for Wood Construction, provides these lumber design values, which are recognized by the model building codes. Canada has grading rules that maintain a standard among mills manufacturing similar woods to assure customers of uniform quality. Grades standardize
1566-404: The "quarter" system in specifications as a vogue of insider knowledge, though the materials being specified are finished lumber, thus conflating the separate systems and causing confusion. Hardwoods cut for furniture are cut in the fall and winter, after the sap has stopped running in the trees. If hardwoods are cut in the spring or summer the sap ruins the natural color of the lumber and decreases
1620-409: The 4×4 (89 mm × 89 mm), are common lumber sizes used in modern construction. They are the basic building blocks for such common structures as balloon-frame or platform-frame housing. Dimensional lumber made from softwood is typically used for construction, while hardwood boards are more commonly used for making cabinets or furniture. Lumber's nominal dimensions are larger than
1674-620: The Au Sable State Forest are designated as National Natural Landmarks . See List of National Natural Landmarks . An 11,680-acre (47.3 km) parcel within the Au Sable State Forest, the Dead Stream Swamp, located 30 miles northeast of Cadillac , is described by its owner/operator, the Michigan Department of Natural Resources and Environment , as "an exceptionally large example of a northern white cedar freshwater swamp forest ( Thuja occidentalis ), considered to be
Au Sable State Forest - Misplaced Pages Continue
1728-598: The Chapel in 1960 to provide fishermen with a place of reverence and has developed into a popular tourist attraction. The Mason Tract also contains the Mason Tract Pathway, which is used for hiking and cross-country skiing. Mountain biking on the Mason Tract Pathway is prohibited via a Director’s Order." Lumber Lumber is wood that has been processed into uniform and useful sizes (dimensional lumber), including beams and planks or boards . Lumber
1782-725: The South Branch of the Au Sable River designed to protect the quality fishing waters of this area. The Mason Tract originated from acceptance of a 1500-acre gift from the George Mason family in 1954. Over time, additional acreage has been acquired from the US Forest Service and private individuals through land exchanges. The Mason gift was contingent the area be used as a permanent game preserve, no part shall ever be sold or developed [i.e. natural gas fracking] by
1836-828: The UK), 2×6 , and 4×4 . The length of a board is usually specified separately from the width and depth. It is thus possible to find 2×4s that are four, eight, and twelve feet in length. In Canada and the United States, the standard lengths of lumber are 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 feet (1.8, 2.4, 3.0, 3.7, 4.3, 4.9, 5.5, 6.1, 6.7 and 7.3 m). For wall framing, precut "stud" lengths are available, and are commonly used. For ceilings heights of 8, 9 or 10 feet (2.4, 2.7 or 3.0 m), studs are available in 92 + 5 ⁄ 8 inches (2.35 m), 104 + 5 ⁄ 8 inches (2.66 m), and 116 + 5 ⁄ 8 inches (2.96 m). The length of
1890-509: The United States began with the publication of the American Lumber Standard in 1924, which set specifications for lumber dimensions, grade, and moisture content; it also developed inspection and accreditation programs. These standards have changed over the years to meet the changing needs of manufacturers and distributors, with the goal of keeping lumber competitive with other construction products. Current standards are set by
1944-422: The actual standard dimensions of finished lumber. Historically, the nominal dimensions were the size of the green (not dried), rough (unfinished) boards that eventually became smaller finished lumber through drying and planing (to smooth the wood). Today, the standards specify the final finished dimensions and the mill cuts the logs to whatever size it needs to achieve those final dimensions. Typically, that rough cut
1998-557: The amount of oxygen is inadequate. Fungi lumber/timber defects: Following are the insects and molluscs which are usually responsible for the decay of timber/lumber: Wall panel A wall panel is single piece of material, usually flat and cut into a rectangular shape, that serves as the visible and exposed covering for a wall. Wall panels are functional as well as decorative, providing insulation and soundproofing , combined with uniformity of appearance, along with some measure of durability or ease of replaceability. While there
2052-591: The climax in bog forest development." The Dead Stream Swamp was designated as a National Natural Landmark in 1976. A 160-acre (650,000 m) parcel within the Au Sable State Forest, the Roscommon Virgin Pine Stand 8 miles (12 km) north of St. Helen, Michigan , (Location 8 miles east of Roscommon , off Sunset Drive) is an old-growth stand of red pine , which includes a former national champion red pine. Roscommon Virgin Pine Stand
2106-402: The conversion of log timber into planks 30 times faster than previously. The circular saw, as used in modern sawmills, was invented by an Englishman named Miller in 1777. It was not until the nineteenth century, however, that it was generally applied, and its great work belongs to that period. The first insertable teeth for this saw were invented by W. Kendal, an American, in 1826. Logging in
2160-408: The countries with significant sawmilling industries. Historical wood-frame home building regions are: Europe, North America, Japan. Different areas of the world are recognized as significant timber suppliers; however, these areas (Indonesia, Sarawak, New Guinea, etc.) are exporters of raw logs and do not have a significant domestic lumber producing industry. The largest lumber manufacturing regions in
2214-543: The modern era; a 1st class timber during the Sui was reconstructed as 15×10 (Sui dynasty inches, or 29.4 mm). Defects occurring in lumber are grouped into the following four divisions: During the process of converting timber to commercial forms of lumber the following defects may occur: Fungi attack wood (both timber and lumber) when these conditions are all present: Wood with less than 25% moisture (dry weight basis) can remain free of decay for centuries. Similarly, wood submerged in water may not be attacked by fungi if
Au Sable State Forest - Misplaced Pages Continue
2268-491: The most common and widely used method of sawing logs. Plain sawn lumber is produced by making the first cut on a tangent to the circumference of the log. Each additional cut is then made parallel to the one before. This method produces the widest possible boards with the least amount of log waste. Lumber manufacturing globally is determined by the preferred style of building; areas with a "wood building culture" (homes were built from wood rather than other materials like brick) are
2322-505: The quality of lumber at different levels and are based on moisture content, size, and manufacture at the time of grading, shipping, and unloading by the buyer. The National Lumber Grades Authority (NLGA) is responsible for writing, interpreting and maintaining Canadian lumber grading rules and standards. The Canadian Lumber Standards Accreditation Board (CLSAB) monitors the quality of Canada's lumber grading and identification system. Their common grade abbrievation, CLS, Canadian Lumber Standard
2376-672: The role of supplier of lumber for the British fleet. By the 1790s, New England was exporting 36 million feet of pine boards and at least 300 ship masts per year to the British Empire. The timber supply began to dwindle at the start of the twentieth century due to significant harvest volumes, so the logging industry was forced to seek timber elsewhere; hence, the expansion into the American West. Logs are converted into lumber by being sawn, hewn , or split . Sawing with
2430-525: The rules of the Sciages Avivés Tropicaux Africains (SATA) and is based on clear cuttings – established by the percentage of the clear surface. In North America, market practices for dimensional lumber made from hardwoods varies significantly from the regularized standardized ' dimension lumber ' sizes used for sales and specification of softwoods – hardwood boards are often sold totally rough cut, or machine planed only on
2484-501: The settlers started clearing the huge expanses of forest in order to grow crops. Felled trees were made into planks by water-powered mills and the timber (cedar and yew) was shipped to Portugal and Spain. About 1427, the first sawmill in Germany was built. Cornelis Corneliszoon (or Krelis Lootjes) was a Dutch windmill owner from Uitgeest who invented the first mechanical sawmill, which was wind-powered, on 15 December 1593. This made
2538-440: The spread of flames and help contain fires within specific areas, thereby providing valuable time for evacuation and reducing the overall damage caused by fire. The use of these panels is regulated by building codes to ensure compliance with safety standards. There is a new type of eco friendly 3D shaped wall panel made out of the fibrous residue of sugarcane. This fibres of crushed sugarcane stalks, remaining after raw sugar
2592-644: The state, and no camping be allowed in the area for 25 years. The State of Michigan has continued the no-camping restriction in the Mason Tract. The only camping allowed is within Canoe Harbor State Forest Campground, located at the north end of the Tract on the Au Sable River. The Mason Tract offers quality fishing, hunting, and canoeing opportunities. The Mason Tract is home to the pristine Mason Chapel. The Mason Family constructed
2646-453: The two (broader) face sides. When hardwood boards are also supplied with planed faces, it is usually both by random widths of a specified thickness (normally matching milling of softwood dimensional lumber) and somewhat random lengths. But besides those older (traditional and normal) situations, in recent years some product lines have been widened to also market boards in standard stock sizes; these usually retail in big-box stores and using only
2700-459: The value of the wood for furniture. Engineered lumber is lumber created by a manufacturer and designed for a certain structural purpose. The main categories of engineered lumber are: In the United States, pilings are mainly cut from southern yellow pines and Douglas-fir . Treated pilings are available in chromated copper arsenate retentions of 0.60, 0.80 and 2.50 pounds per cubic foot (9.6, 12.8 and 40.0 kg/m ) if treatment
2754-424: The world are: China (18%); United States (17%); Canada (10%); Russia (9%); Germany (5%); Sweden (4%). In early periods of society, to make wood for building, the trunks of trees were split with wedges into as many and as thin pieces as possible. If it was necessary to have them still thinner, they were hewn, by some sharp instrument, on both sides, to the proper size. This simple but wasteful manner of making boards
SECTION 50
#17327833720222808-525: Was 13 ⁄ 16 in (21 mm). In 1928, that was reduced by 4%, and yet again by 4% in 1956. In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber
2862-516: Was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 inch. Dimensional lumber is available in green, unfinished state, and for that kind of lumber, the nominal dimensions are the actual dimensions. Individual pieces of lumber exhibit a wide range in quality and appearance with respect to knots, slope of grain, shakes and other natural characteristics. Therefore, they vary considerably in strength, utility, and value. The move to set national standards for lumber in
2916-482: Was designated as a National Natural Landmark in 1980. Backus Creek State Game Area is a state game area within Roscommon County . It incorporates 4,379 acres (17.72 km) of hunting, recreational, and protected wildlife and wetland areas of rural Backus Township and Higgins Township . The Mason Tract covers a portion of the Au Sable State Forest. It is "a 4,493 acre special management area along
#21978