Misplaced Pages

#795204

86-510: The VT50 was sold only for a short period before it was replaced by the VT52 in September 1975. The VT52 provided a screen of 24 rows and 80 columns of text and supported all 95 ASCII characters as well as 32 graphics characters, bi-directional scrolling, and an expanded control character system. DEC produced a series of upgraded VT52's with additional hardware for various uses. The VT52 family

172-529: A shift function (like in ITA2 ), which would allow more than 64 codes to be represented by a six-bit code . In a shifted code, some character codes determine choices between options for the following character codes. It allows compact encoding, but is less reliable for data transmission , as an error in transmitting the shift code typically makes a long part of the transmission unreadable. The standards committee decided against shifting, and so ASCII required at least

258-600: A 1990 DEC oral history presentation, Robert Everett , Fellow of the Computer History Museum, credited John T. (Jack) Gilmore with "designing Digital's gold keyboard interface". Software using Gold key keyboard functions was developed across multiple generations of DEC computers. PDP-8 processors ran the WPS-8 word processing software package on several models of one- and two-user dedicated "word station" systems. PDP-11 processors running RT-11 used

344-522: A BS (backspace). Instead, there was a key marked RUB OUT that sent code 127 (DEL). The purpose of this key was to erase mistakes in a manually-input paper tape: the operator had to push a button on the tape punch to back it up, then type the rubout, which punched all holes and replaced the mistake with a character that was intended to be ignored. Teletypes were commonly used with the less-expensive computers from Digital Equipment Corporation (DEC); these systems had to use what keys were available, and thus

430-499: A Gold Key Country Kit for use with VAX ALL-IN-1. Emacs offers an EDT emulator package which supports both physical and virtual VT100-style terminals. There is a slight complication for virtual ( xterm -style) terminals which run on top of a host PC operating system, in that the Num lock key cannot be remapped to the Gold key at the level of Emacs; instead, it is remapped at the level of

516-411: A VT52-based screen driver in an era when ANSI escape codes had already become almost universal. This version added several new commands including the ability to select colors. VT52 commands normally consisted of the escape character and a single character following it. The exception to this rule was the Y command, which also required two numbers to be sent. The ESC Y code was used to position

602-458: A character count followed by the characters of the line and which used EBCDIC rather than ASCII encoding. The Telnet protocol defined an ASCII "Network Virtual Terminal" (NVT), so that connections between hosts with different line-ending conventions and character sets could be supported by transmitting a standard text format over the network. Telnet used ASCII along with CR-LF line endings, and software using other conventions would translate between

688-501: A line of twenty equals signs. Repeat counts also apply to keypad editing commands, but if such a command itself requires the Gold key, the Gold key must be pressed again before the command key. For example, assuming a VT100 keypad, GOLD keypad 6 perform the PASTE editing command (once), while GOLD 4 GOLD keypad 6 performs PASTE four times. For editing commands which are directional, such as moving

774-498: A line terminator. The tty driver would handle the LF to CRLF conversion on output so files can be directly printed to terminal, and NL (newline) is often used to refer to CRLF in UNIX documents. Unix and Unix-like systems, and Amiga systems, adopted this convention from Multics. On the other hand, the original Macintosh OS , Apple DOS , and ProDOS used carriage return (CR) alone as

860-605: A line terminator; however, since Apple later replaced these obsolete operating systems with their Unix-based macOS (formerly named OS X) operating system, they now use line feed (LF) as well. The Radio Shack TRS-80 also used a lone CR to terminate lines. Computers attached to the ARPANET included machines running operating systems such as TOPS-10 and TENEX using CR-LF line endings; machines running operating systems such as Multics using LF line endings; and machines running operating systems such as OS/360 that represented lines as

946-438: A loop had to be nearly constant, or text lower on the screen would be displayed in the wrong place during that refresh. Typing a character produced a noise by activating a relay. The relay was also used as a buzzer to sound the bell character , producing a sound that "has been compared to the sound of a '52 Chevy stripping its gears." DEC also offered an optional hard-copy device called an electrolytic copier, which fit into

SECTION 10

#1732801094796

1032-600: A reserved device control (DC0), synchronous idle (SYNC), and acknowledge (ACK). These were positioned to maximize the Hamming distance between their bit patterns. ASCII-code order is also called ASCIIbetical order. Collation of data is sometimes done in this order rather than "standard" alphabetical order ( collating sequence ). The main deviations in ASCII order are: An intermediate order converts uppercase letters to lowercase before comparing ASCII values. ASCII reserves

1118-541: A reserved meaning. Over time this interpretation has been co-opted and has eventually been changed. In modern usage, an ESC sent to the terminal usually indicates the start of a command sequence, which can be used to address the cursor, scroll a region, set/query various terminal properties, and more. They are usually in the form of a so-called " ANSI escape code " (often starting with a " Control Sequence Introducer ", "CSI", " ESC [ ") from ECMA-48 (1972) and its successors. Some escape sequences do not have introducers, like

1204-400: A second key is pressed and released. In that sense, DEC and compatible software uses the Gold key in the same way that Emacs uses the escape key . The base model VT50 terminal was equipped with a main keyboard only, and so had no Gold key. The model VT50H added a numeric keypad, including three unlabeled keys whose functions would be determined by whatever program was running. Located at

1290-404: A seven-bit code. The committee considered an eight-bit code, since eight bits ( octets ) would allow two four-bit patterns to efficiently encode two digits with binary-coded decimal . However, it would require all data transmission to send eight bits when seven could suffice. The committee voted to use a seven-bit code to minimize costs associated with data transmission. Since perforated tape at

1376-399: A terminal. Some operating systems such as CP/M tracked file length only in units of disk blocks, and used control-Z to mark the end of the actual text in the file. For these reasons, EOF, or end-of-file , was used colloquially and conventionally as a three-letter acronym for control-Z instead of SUBstitute. The end-of-text character ( ETX ), also known as control-C , was inappropriate for

1462-461: A thin helical bar wrapped around a rotating drum. One rotation of the drum scanned an intersecting area of the electrodes across the width of the paper. While the copier did an admirable job of capturing the contents of the screen, the output of the copier had an unfortunate resemblance to wet toilet tissue . Digital patented the innovation of having a single character generator provide the text font for both screen and copier. The basic layout of

1548-568: A variant of Digital's OS/8 operating system, and usually WPS-8 , Digital's word processing system. VT52 codes remained proprietary to DEC, although a number of other companies provided emulations in their terminals. Later VT series terminals supported a subset of these commands. One interesting case is the GEMDOS system and its offshoot, the TOS operating system of the Atari ST . These systems used

1634-449: A variety of reasons, while using control-Z as the control character to end a file is analogous to the letter Z's position at the end of the alphabet, and serves as a very convenient mnemonic aid . A historically common and still prevalent convention uses the ETX character convention to interrupt and halt a program via an input data stream, usually from a keyboard. The Unix terminal driver uses

1720-737: Is 0101 in binary). Many of the non-alphanumeric characters were positioned to correspond to their shifted position on typewriters; an important subtlety is that these were based on mechanical typewriters, not electric typewriters. Mechanical typewriters followed the de facto standard set by the Remington No. 2 (1878), the first typewriter with a shift key, and the shifted values of 23456789- were "#$ %_&'()  – early typewriters omitted 0 and 1 , using O (capital letter o ) and l (lowercase letter L ) instead, but 1! and 0) pairs became standard once 0 and 1 became common. Thus, in ASCII !"#$ % were placed in

1806-427: Is replaced by a second control-S to resume output. The 33 ASR also could be configured to employ control-R (DC2) and control-T (DC4) to start and stop the tape punch; on some units equipped with this function, the corresponding control character lettering on the keycap above the letter was TAPE and TAPE respectively. The Teletype could not move its typehead backwards, so it did not have a key on its keyboard to send

SECTION 20

#1732801094796

1892-404: Is the newline problem on various operating systems . Teletype machines required that a line of text be terminated with both "carriage return" (which moves the printhead to the beginning of the line) and "line feed" (which advances the paper one line without moving the printhead). The name "carriage return" comes from the fact that on a manual typewriter the carriage holding the paper moves while

1978-503: The Comité Consultatif International Téléphonique et Télégraphique (CCITT) International Telegraph Alphabet No. 2 (ITA2) standard of 1932, FIELDATA (1956 ), and early EBCDIC (1963), more than 64 codes were required for ASCII. ITA2 was in turn based on Baudot code , the 5-bit telegraph code Émile Baudot invented in 1870 and patented in 1874. The committee debated the possibility of

2064-636: The Teletype Model 33 , which used the left-shifted layout corresponding to ASCII, differently from traditional mechanical typewriters. Electric typewriters, notably the IBM Selectric (1961), used a somewhat different layout that has become de facto standard on computers – following the IBM PC (1981), especially Model M (1984) – and thus shift values for symbols on modern keyboards do not correspond as closely to

2150-730: The United States Federal Government support ASCII, stating: I have also approved recommendations of the Secretary of Commerce [ Luther H. Hodges ] regarding standards for recording the Standard Code for Information Interchange on magnetic tapes and paper tapes when they are used in computer operations. All computers and related equipment configurations brought into the Federal Government inventory on and after July 1, 1969, must have

2236-507: The VT100 , it is the signature element of a consistent user interface implemented by Digital Equipment Corporation (DEC) across multiple product lines. It is used within WPS, EDT, and many other common VAX programs. The key, typically located as the upper leftmost key on the numeric keypad on different terminals, was not necessarily colored gold. Some DEC terminals would include keyboards where

2322-407: The WPS-8 word processing system, the main keyboard key C is marked " CENTR ", in gold lettering, on its front surface; the keystrokes GOLD C invoke that word processing function to center the current line of text. The Gold key is a prefix key, not a modifier key . A modifier key would be pressed and held while a second key is pressed; the Gold key is pressed and released before

2408-667: The carriage return , line feed , and tab codes. For example, lowercase i would be represented in the ASCII encoding by binary 1101001 = hexadecimal 69 ( i is the ninth letter) = decimal 105. Despite being an American standard, ASCII does not have a code point for the cent (¢). It also does not support English terms with diacritical marks such as résumé and jalapeño , or proper nouns with diacritical marks such as Beyoncé (although on certain devices characters could be combined with punctuation such as Tilde (~) and Backtick (`) to approximate such characters.) The American Standard Code for Information Interchange (ASCII)

2494-645: The "Reset to Initial State", "RIS" command " ESC c ". In contrast, an ESC read from the terminal is most often used as an out-of-band character used to terminate an operation or special mode, as in the TECO and vi text editors . In graphical user interface (GUI) and windowing systems, ESC generally causes an application to abort its current operation or to exit (terminate) altogether. The inherent ambiguity of many control characters, combined with their historical usage, created problems when transferring "plain text" files between systems. The best example of this

2580-582: The "help" prefix command in GNU Emacs . Many more of the control characters have been assigned meanings quite different from their original ones. The "escape" character (ESC, code 27), for example, was intended originally to allow sending of other control characters as literals instead of invoking their meaning, an "escape sequence". This is the same meaning of "escape" encountered in URL encodings, C language strings, and other systems where certain characters have

2666-401: The "line feed" function (which causes a printer to advance its paper), and character 8 represents " backspace ". RFC   2822 refers to control characters that do not include carriage return, line feed or white space as non-whitespace control characters. Except for the control characters that prescribe elementary line-oriented formatting, ASCII does not define any mechanism for describing

VT52 - Misplaced Pages Continue

2752-419: The ASCII chart in this article. Ninety-five of the encoded characters are printable: these include the digits 0 to 9 , lowercase letters a to z , uppercase letters A to Z , and punctuation symbols . In addition, the original ASCII specification included 33 non-printing control codes which originated with Teletype models ; most of these are now obsolete, although a few are still commonly used, such as

2838-679: The ASCII table as earlier keyboards did. The /? pair also dates to the No. 2, and the ,< .> pairs were used on some keyboards (others, including the No. 2, did not shift , (comma) or . (full stop) so they could be used in uppercase without unshifting). However, ASCII split the ;: pair (dating to No. 2), and rearranged mathematical symbols (varied conventions, commonly -* =+ ) to :* ;+ -= . Some then-common typewriter characters were not included, notably ½ ¼ ¢ , while ^ ` ~ were included as diacritics for international use, and < > for mathematical use, together with

2924-470: The DEL character was assigned to erase the previous character. Because of this, DEC video terminals (by default) sent the DEL character for the key marked "Backspace" while the separate key marked "Delete" sent an escape sequence ; many other competing terminals sent a BS character for the backspace key. The early Unix tty drivers, unlike some modern implementations, allowed only one character to be set to erase

3010-648: The KED/KEX editors. VAXen running VMS used the EDT editor, initially with either the VT52 or the VT100 (which have slightly different keypads). Alpha AXP RISC processors running OpenVMS also used EDT, often with later-model terminals such as the VT220 – VT420 . EDT recognizes an additional usage for the Gold key, to enter a repeat count. For example, the keystrokes GOLD 2 0 = enter

3096-469: The Teletype Model 33 machine assignments for codes 17 (control-Q, DC1, also known as XON), 19 (control-S, DC3, also known as XOFF), and 127 ( delete ) became de facto standards. The Model 33 was also notable for taking the description of control-G (code 7, BEL, meaning audibly alert the operator) literally, as the unit contained an actual bell which it rang when it received a BEL character. Because

3182-486: The VT50 did not support lowercase letters. Computer users of that era seldom needed lowercase text. The VT50H added a separate "auxilary keyboard" on the right side of the original keyboard. This was arranged in the fashion of a numeric keypad with additional control keys above the numbers. Four of these were cursor keys which sent ESC A through D for up, down, left and right, respectively. Another three of

3268-399: The blank panel on the right side of the display. This device was able to print, scan-line by scan-line, an exact replica of the screen onto a damp roll of special paper. It did this by electroplating metal from an electrode into the paper. The paper ran between two electrodes. The electrode on one side was a thin straight bar oriented across the paper width. The electrode on the other side was

3354-407: The capability to use the Standard Code for Information Interchange and the formats prescribed by the magnetic tape and paper tape standards when these media are used. Gold key (DEC) The Gold key is a computer keyboard key used as a prefix to invoke a variety of single-key editing and formatting functions. Usually located in the top-left position of the numeric keypad on platforms such as

3440-585: The change into its draft standard. The X3.2.4 task group voted its approval for the change to ASCII at its May 1963 meeting. Locating the lowercase letters in sticks 6 and 7 caused the characters to differ in bit pattern from the upper case by a single bit, which simplified case-insensitive character matching and the construction of keyboards and printers. The X3 committee made other changes, including other new characters (the brace and vertical bar characters), renaming some control characters (SOM became start of header (SOH)) and moving or removing others (RU

3526-493: The concept of "carriage return" was meaningless. IBM's PC DOS (also marketed as MS-DOS by Microsoft) inherited the convention by virtue of being loosely based on CP/M, and Windows in turn inherited it from MS-DOS. Requiring two characters to mark the end of a line introduces unnecessary complexity and ambiguity as to how to interpret each character when encountered by itself. To simplify matters, plain text data streams, including files, on Multics used line feed (LF) alone as

VT52 - Misplaced Pages Continue

3612-527: The convention was so well established that backward compatibility necessitated continuing to follow it. When Gary Kildall created CP/M , he was inspired by some of the command line interface conventions used in DEC's RT-11 operating system. Until the introduction of PC DOS in 1981, IBM had no influence in this because their 1970s operating systems used EBCDIC encoding instead of ASCII, and they were oriented toward punch-card input and line printer output on which

3698-483: The cursor anywhere on the screen, using two parameters representing the X and Y coordinates of the cursor position, with the upper left corner of the screen being position 1,1. These numbers were sent as ASCII characters of that value, adding 31. For instance, to position the cursor at column 30 and line 20, you would add 31 to each value to get 61 and 51, then look up those ASCII characters, = and 3 . The complete command would then be ESC Y 3 = (note

3784-519: The cursor, negative repeat counts may be used to indicate reverse direction. VAX and Alpha VMS systems supported the ALL-IN-1 office application suite, including the WPS-Plus word processor. Various hardware and software products have been produced to maintain compatibility with both the variety of legacy Gold key host systems and with the expertise and preferences of the many Gold key users. At

3870-448: The data while the display hardware was inactive between raster scan lines, and then triggered the display hardware to take over at the appropriate time. The display system returned control to the CPU when it completed drawing the line. The CPU was so basic that addition and subtraction could only be done by repeatedly incrementing or decrementing two registers. Moreover, the time taken by such

3956-663: The earlier five-bit ITA2 , which was also used by the competing Telex teleprinter system. Bob Bemer introduced features such as the escape sequence . His British colleague Hugh McGregor Ross helped to popularize this work – according to Bemer, "so much so that the code that was to become ASCII was first called the Bemer–Ross Code in Europe". Because of his extensive work on ASCII, Bemer has been called "the father of ASCII". On March 11, 1968, US President Lyndon B. Johnson mandated that all computers purchased by

4042-576: The earlier teleprinter encoding systems. Like other character encodings , ASCII specifies a correspondence between digital bit patterns and character symbols (i.e. graphemes and control characters ). This allows digital devices to communicate with each other and to process, store, and communicate character-oriented information such as written language. Before ASCII was developed, the encodings in use included 26 alphabetic characters, 10 numerical digits , and from 11 to 25 special graphic symbols. To include all these, and control characters compatible with

4128-548: The end-of-transmission character ( EOT ), also known as control-D, to indicate the end of a data stream. In the C programming language , and in Unix conventions, the null character is used to terminate text strings ; such null-terminated strings can be known in abbreviation as ASCIZ or ASCIIZ, where here Z stands for "zero". Other representations might be used by specialist equipment, for example ISO 2047 graphics or hexadecimal numbers. Codes 20 hex to 7E hex , known as

4214-627: The first 32 code points (numbers 0–31 decimal) and the last one (number 127 decimal) for control characters . These are codes intended to control peripheral devices (such as printers ), or to provide meta-information about data streams, such as those stored on magnetic tape. Despite their name, these code points do not represent printable characters (i.e. they are not characters at all, but signals). For debugging purposes, "placeholder" symbols (such as those given in ISO 2047 and its predecessors) are assigned to them. For example, character 0x0A represents

4300-474: The gold key was labeled PF1, as on the VT100 and VT200, or was colored blue, as on the VT52 . On some keyboards, the normal function of a key would be labeled on the lower portion of the key, while its alternate function activated with the GOLD key would be labeled above it. The Gold Key is used to invoke single-key functions which may be located on either the main keyboard or the numeric keypad. For example, on

4386-410: The keys on the keyboard sent a command sequence back to the host computer. The VT55 incorporated an add-on graphics system that was capable of displaying two mathematical functions or histograms . This was invoked by sending a command string that sent the terminal into graphics mode , with further data being sent to a separate buffer and CPU. Both systems mixed their data during the display, allowing

SECTION 50

#1732801094796

4472-410: The keys were unlabeled and could be programmed to return any two-character code, and would default to ESC P through R . The VT50 was soon replaced by the greatly upgraded VT52. The VT52 had considerably larger buffers, giving it the capacity to store not only a full 24 lines of text that better utilized the screen space, but also the text off the top and bottom of the screen. This allowed

4558-448: The keytop for the O key also showed a left-arrow symbol (from ASCII-1963, which had this character instead of underscore ), a noncompliant use of code 15 (control-O, shift in) interpreted as "delete previous character" was also adopted by many early timesharing systems but eventually became neglected. When a Teletype 33 ASR equipped with the automatic paper tape reader received a control-S (XOFF, an abbreviation for transmit off), it caused

4644-800: The local conventions and the NVT. The File Transfer Protocol adopted the Telnet protocol, including use of the Network Virtual Terminal, for use when transmitting commands and transferring data in the default ASCII mode. This adds complexity to implementations of those protocols, and to other network protocols, such as those used for E-mail and the World Wide Web, on systems not using the NVT's CR-LF line-ending convention. The PDP-6 monitor, and its PDP-10 successor TOPS-10, used control-Z (SUB) as an end-of-file indication for input from

4730-454: The lower case characters and some punctuation with new characters useful for the display of math. Unusual were glyphs for ¹⁄, ³⁄, ⁵⁄, ⁷⁄, which could be combined with subscript numbers to produce things like ⅗, and scan lines allowing a function to be plotted with 8 times higher vertical resolution than text. Later VT terminals supported VT52 commands, as well as adding a single new command to return to full ANSI mode. Compatibility mode changed

4816-452: The previous character in canonical input processing (where a very simple line editor is available); this could be set to BS or DEL, but not both, resulting in recurring situations of ambiguity where users had to decide depending on what terminal they were using ( shells that allow line editing, such as ksh , bash , and zsh , understand both). The assumption that no key sent a BS character allowed Ctrl+H to be used for other purposes, such as

4902-515: The previous section. Code 7F hex corresponds to the non-printable "delete" (DEL) control character and is therefore omitted from this chart; it is covered in the previous section's chart. Earlier versions of ASCII used the up arrow instead of the caret (5E hex ) and the left arrow instead of the underscore (5F hex ). ASCII was first used commercially during 1963 as a seven-bit teleprinter code for American Telephone & Telegraph 's TWX (TeletypeWriter eXchange) network. TWX originally used

4988-413: The printable characters, represent letters, digits, punctuation marks , and a few miscellaneous symbols. There are 95 printable characters in total. Code 20 hex , the "space" character, denotes the space between words, as produced by the space bar of a keyboard. Since the space character is considered an invisible graphic (rather than a control character) it is listed in the table below instead of in

5074-444: The proposed Bell code and ASCII were both ordered for more convenient sorting (i.e., alphabetization) of lists and added features for devices other than teleprinters. The use of ASCII format for Network Interchange was described in 1969. That document was formally elevated to an Internet Standard in 2015. Originally based on the (modern) English alphabet , ASCII encodes 128 specified characters into seven-bit integers as shown by

5160-449: The rear, were cooled by convection . The large, flat top of the terminal frequently accommodated large volumes of DEC documentation, which could block the vents and cause overheating. The VT50 was the first terminal Digital produced in this cabinet. It provided only 12 lines of text with blank lines between them to use the entire vertical area of the display. Like its predecessor, the VT05 ,

5246-622: The response to the ESC Z command; all models responded with the code ESC / Z . The GEMDOS version of the VT52 command set adds a number of new commands. These mostly concerned color support, with the color selection being sent as a single character using the same number-to-character encoding as the Y command. Only the last four bits of the number were used, providing support for 16 colors. The Atari ST only supported 4 of those in 80 column mode and all 16 in 40 column mode. A few new cursor commands were added as well, essentially filling out

SECTION 60

#1732801094796

5332-475: The row, column ordering, not X, Y). Adding 31 ensures that the characters are shifted out of the control range into the printable character range, so they will transmit properly. The ESC Z command allowed the host computer to identify the capabilities of the terminal. There were eight possible responses. Several additional codes were used with the optional copier: The VT52 and VT55 included two characters sets, ASCII and "graphics mode" which switched out

5418-400: The same cabinet but had a more complete custom processor. Application-specific behavior was coded in separate PROM memory, using a separate instruction code that the processor interpreted. This unpublished language was to be used to easily develop additional models specific to single Digital marketing organizations. These terminals synthesized a "tock" sound on a speaker for feedback when a key

5504-522: The same reason, many special signs commonly used as separators were placed before digits. The committee decided it was important to support uppercase 64-character alphabets , and chose to pattern ASCII so it could be reduced easily to a usable 64-character set of graphic codes, as was done in the DEC SIXBIT code (1963). Lowercase letters were therefore not interleaved with uppercase . To keep options available for lowercase letters and other graphics,

5590-469: The same time that DEC was selling VAX-based WPS-Plus in the late 1980s, Exceptional Business Solutions of Culver City, California, sold a PC-based word processor named WPS-PC, "designed for users who have experience with the DEC family of Gold-key word processors and would rather fight than switch." As personal computers began to replace serial terminals even in their core role of talking to central host computers, DEC itself supplied its new Rainbow PC with

5676-494: The second stick, positions 1–5, corresponding to the digits 1–5 in the adjacent stick. The parentheses could not correspond to 9 and 0 , however, because the place corresponding to 0 was taken by the space character. This was accommodated by removing _ (underscore) from 6 and shifting the remaining characters, which corresponded to many European typewriters that placed the parentheses with 8 and 9 . This discrepancy from typewriters led to bit-paired keyboards , notably

5762-674: The set of the original VT52 by including commands that cleared toward the top of the screen instead of the bottom. The system did not support a number of VT52 commands, including F, G and Z. ASCII ASCII ( / ˈ æ s k iː / ASS -kee ), an acronym for American Standard Code for Information Interchange , is a character encoding standard for electronic communication. ASCII codes represent text in computers, telecommunications equipment , and other devices. ASCII has just 128 code points , of which only 95 are printable characters , which severely limit its scope. The set of available punctuation had significant impact on

5848-538: The simple line characters \ | (in addition to common / ). The @ symbol was not used in continental Europe and the committee expected it would be replaced by an accented À in the French variation, so the @ was placed in position 40 hex , right before the letter A. The control codes felt essential for data transmission were the start of message (SOM), end of address (EOA), end of message (EOM), end of transmission (EOT), "who are you?" (WRU), "are you?" (RU),

5934-402: The special and numeric codes were arranged before the letters, and the letter A was placed in position 41 hex to match the draft of the corresponding British standard. The digits 0–9 are prefixed with 011, but the remaining 4 bits correspond to their respective values in binary, making conversion with binary-coded decimal straightforward (for example, 5 in encoded to 011 0101 , where 5

6020-425: The standard is unclear about the meaning of "delete". Probably the most influential single device affecting the interpretation of these characters was the Teletype Model 33 ASR, which was a printing terminal with an available paper tape reader/punch option. Paper tape was a very popular medium for long-term program storage until the 1980s, less costly and in some ways less fragile than magnetic tape. In particular,

6106-440: The structure or appearance of text within a document. Other schemes, such as markup languages , address page and document layout and formatting. The original ASCII standard used only short descriptive phrases for each control character. The ambiguity this caused was sometimes intentional, for example where a character would be used slightly differently on a terminal link than on a data stream , and sometimes accidental, for example

6192-515: The syntax of computer languages and text markup. ASCII hugely influenced the design of character sets used by modern computers, including Unicode which has over a million code points, but the first 128 of these are the same as ASCII. The Internet Assigned Numbers Authority (IANA) prefers the name US-ASCII for this character encoding. ASCII is one of the IEEE milestones . ASCII was developed in part from telegraph code . Its first commercial use

6278-441: The tape reader to stop; receiving control-Q (XON, transmit on) caused the tape reader to resume. This so-called flow control technique became adopted by several early computer operating systems as a "handshaking" signal warning a sender to stop transmission because of impending buffer overflow ; it persists to this day in many systems as a manual output control technique. On some systems, control-S retains its meaning, but control-Q

6364-482: The terminal to scroll backwards a limited amount without having to ask the host to re-send data. Another significant upgrade was that the VT52 included lowercase text support. Many new commands and features were added: One notable feature was the introduction of a separate function keypad with the " Gold Key ", which was used for editing programs like WPS-8 , KED, and EDT . Pressing the Gold Key and then typing one of

6450-440: The terminal, with the screen and main keyboard on the left and the blank area on the right, was intended to allow the system to be upgraded. The printer was one such upgrade, but over time DEC offered a number of other options. The large size of the cabinet was deliberate, to avoid a cooling fan. The two circuit boards with processor and memory at the base of the terminal, and a single board with power-supply and monitor electronics at

6536-600: The time could record eight bits in one position, it also allowed for a parity bit for error checking if desired. Eight-bit machines (with octets as the native data type) that did not use parity checking typically set the eighth bit to 0. The code itself was patterned so that most control codes were together and all graphic codes were together, for ease of identification. The first two so-called ASCII sticks (32 positions) were reserved for control characters. The "space" character had to come before graphics to make sorting easier, so it became position 20 hex ; for

6622-500: The top left of the keypad, these were later named "PF" keys, and by convention, the first of them, PF1 , became the Gold key. The VT50H numeric keypad was of limited usefulness in editing because, from the perspective of the computer receiving its input, most of the keypad's keys were indistinguishable from their equivalents on the main keyboard. The VT52 terminal added an alternate keypad mode in which all keypad keys would send distinct character codes. In his introduction to

6708-447: The typebars that strike the ribbon remain stationary. The entire carriage had to be pushed (returned) to the right in order to position the paper for the next line. DEC operating systems ( OS/8 , RT-11 , RSX-11 , RSTS , TOPS-10 , etc.) used both characters to mark the end of a line so that the console device (originally Teletype machines) would work. By the time so-called "glass TTYs" (later called CRTs or "dumb terminals") came along,

6794-493: The user to mix graphics and text on a single screen, as opposed to systems like the Tektronix 4010 or plotters that had to slowly draw text using graphics commands. This system became known as waveform graphics , and would re-appear on the later VT105. The VT61 and VT62 were block-mode terminals . The VT62 was to be used in conjunction with TRAX, a transaction processing operating system on high-end PDP-11 's. They used

6880-741: Was developed under the auspices of a committee of the American Standards Association (ASA), called the X3 committee, by its X3.2 (later X3L2) subcommittee, and later by that subcommittee's X3.2.4 working group (now INCITS ). The ASA later became the United States of America Standards Institute (USASI) and ultimately became the American National Standards Institute (ANSI). With the other special characters and control codes filled in, ASCII

6966-457: Was followed by the much more sophisticated VT100 in 1978. These terminals supported asynchronous communication at baud rates up to 9600 bits per second and did not require any fill characters . Like other early DEC terminals they were equipped with both an RS-232 port as well as a 20mA current loop , an older serial standard used with teletype machines that was more suitable for transmission over long runs of twisted-pair wiring. Data

7052-557: Was in the Teletype Model 33 and the Teletype Model 35 as a seven- bit teleprinter code promoted by Bell data services. Work on the ASCII standard began in May 1961, with the first meeting of the American Standards Association's (ASA) (now the American National Standards Institute or ANSI) X3.2 subcommittee. The first edition of the standard was published in 1963, underwent a major revision during 1967, and experienced its most recent update during 1986. Compared to earlier telegraph codes,

7138-410: Was pressed instead of the relay. Though the keyboards were identical, VT6x users admired the superior "feel". The relatively large expansion area of the VT50 case, combined with rapidly shrinking electronics in the late 1970s, allowed DEC to produce single-box, stand-alone minicomputer /terminals similar to a contemporary microcomputer . The VT78 added a single-chip PDP-8 processor to the VT52, ran

7224-695: Was published as ASA X3.4-1963, leaving 28 code positions without any assigned meaning, reserved for future standardization, and one unassigned control code. There was some debate at the time whether there should be more control characters rather than the lowercase alphabet. The indecision did not last long: during May 1963 the CCITT Working Party on the New Telegraph Alphabet proposed to assign lowercase characters to sticks 6 and 7, and International Organization for Standardization TC 97 SC 2 voted during October to incorporate

7310-399: Was read into a small buffer, which the display hardware periodically read to produce the display. Characters typed on the keyboard were likewise stored in a buffer and sent over the serial line as quickly as possible. To interpret the commands being sent in the serial data, it used a primitive central processing unit (CPU) built from small-scale-integration integrated circuits . It examined

7396-450: Was removed). ASCII was subsequently updated as USAS X3.4-1967, then USAS X3.4-1968, ANSI X3.4-1977, and finally, ANSI X3.4-1986. In the X3.15 standard, the X3 committee also addressed how ASCII should be transmitted ( least significant bit first) and recorded on perforated tape. They proposed a 9-track standard for magnetic tape and attempted to deal with some punched card formats. The X3.2 subcommittee designed ASCII based on

#795204