64-534: Download coordinates as: The DeRidder Commercial Historic District is a historic district in DeRidder, Louisiana . It covers an 8 acres (3.2 ha) area roughly bounded by Washington Street, West 2nd Street, Stewart Street, and West Port Street and comprises three blocks of commercial and commerce related buildings dating from 1900 to 1933. Earliest buildings (c. 1905) are mainly one story brick structures, while later ones are one to two stories tall. The district
128-652: A rip saw is the most common method, because sawing allows logs of lower quality, with irregular grain and large knots, to be used and is more economical. There are various types of sawing: Dimensional lumber is lumber that is cut to standardized width and depth, often specified in millimetres or inches (but see below for information on nominal dimensions vs. actual dimensions). Carpenters extensively use dimensional lumber in framing wooden buildings. Common sizes include 2×4 (pictured) (also two-by-four and other variants, such as four-by-two in Australia, New Zealand, and
192-462: A "class 1 flame spread rating of 25 or less, when tested in accordance with ASTM standard E 84," which means it burns more slowly than almost all treated wood lumber. A timber mark is a code beaten on to cut wood by a specially made hammer to show the logging licence. The basic understanding of lumber, or "sawn planks", came about in North America in the seventeenth century. Lumber is
256-400: A 1-inch-thick (25 mm) board, 8/4 (eight quarter) is a 2-inch-thick (51 mm) board, etc. This "quarter" system is rarely used for softwood lumber; although softwood decking is sometimes sold as 5/4, even though it is actually one inch thick (from milling 1 ⁄ 8 in or 3.2 mm off each side in a motorized planing step of production). The "quarter" system of reference is
320-534: A 10-foot-long (3.0 m) 2×4 ( 1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 in or 38 by 89 mm) into two 1×4s ( 3 ⁄ 4 by 3 + 1 ⁄ 2 in or 19 by 89 mm) of the same length is considered re-sawing. Structural lumber may also be produced from recycled plastic and new plastic stock. Its introduction has been strongly opposed by the forestry industry. Blending fiberglass in plastic lumber enhances its strength, durability, and fire resistance. Plastic fiberglass structural lumber can have
384-456: A Rous Racket store on the east side of the track." By this time DeRidder had a sawmill, and timber was the prime industry of the area. The longleaf pine was the primary tree used in the industry. In 1903, DeRidder was finally incorporated as a town. In April 1904, a large portion of the business section of DeRidder was destroyed by fire. The cause was apparently arson . A grand jury collected enough evidence for this to indict George Smith,
448-438: A blasted finish. The first floor has quarters for the jailer and his family. In the jail's basement, a long corridor leads to the courthouse next door. In 1928, there was a famous double execution by hanging in the jail for two murderers. These were the only recorded hangings in the jail. The prisoners were hanged by an apparatus at the top of the spiral staircase. After this the jail became known as "the hanging jail". The jail
512-466: A camping place for the workmen - and people wanted to get near the railroad - so 160 acres (0.65 km ) of land was bought for the town site." "Immediately following the purchase of the town site, a ramble of rough houses were hurriedly built out of rough lumber... By 1898 the town consisted of nearly 300 people and a number of shack homes and a sawmill. C. Landry and Mr. George Heard had a hotel. There were about 5 small stores, besides. West Brothers had
576-493: A combined population of 87,988 at the 2010 census. DeRidder was named for Ella de Ridder, the sister-in-law of a Dutch railroad financier, Jan de Goeijen (cf. De Queen, Arkansas ). Her family originally came from the small town of Geldermalsen in the Netherlands , where she was one of 13 children. She ran away from home at an early age and was presumed dead by her family, who only later discovered that she had traveled to
640-472: A framer much time, because they are pre-cut by the manufacturer for use in 8-, 9-, and 10-foot ceiling applications, which means the manufacturer has removed a few inches or centimetres of the piece to allow for the sill plate and the double top plate with no additional sizing necessary. In the Americas, two-bys (2×4s, 2×6s, 2×8s, 2×10s, and 2×12s), named for traditional board thickness in inches, along with
704-510: A gambler, with setting the fire. The man reportedly left town. DeRidder's first bank opened in 1906. On October 15, 1912, DeRidder was voted the parish seat of Beauregard Parish. The Beauregard Parish Court House and the Beauregard Parish Jail (see below) were built in 1914. In July 27, 2024, recent DeRidder mayor Misty Clanton Roberts, an independent who was first elected in 2018, resigned after being investigated for rape of
SECTION 10
#1732771749763768-490: A juvenile and would then be arrested five days later after turning herself in. The local fire chief was named to be the city's acting mayor. DeRidder is located in northern Beauregard Parish at 30°51′5″N 93°17′25″W / 30.85139°N 93.29028°W / 30.85139; -93.29028 (30.851419, -93.290230) and has an elevation of 203 feet (61.9 m). U.S. Route 171 leads south 48 miles (77 km) to Lake Charles and north 15 miles (24 km) to
832-399: A relatively small set of specified lengths; in all cases hardwoods are sold to the consumer by the board-foot (144 cubic inches or 2,360 cubic centimetres), whereas that measure is not used for softwoods at the retailer (to the cognizance of the buyer). Also in North America, hardwood lumber is commonly sold in a "quarter" system, when referring to thickness; 4/4 (four quarter) refers to
896-452: A timber is referred to as one "timber" (材), and the dimensions of other structural components were quoted in multiples of "timber"; thus, as the width of the actual timber varied, the dimensions of other components were easily calculated, without resorting to specific figures for each scale. The dimensions of timbers in similar applications show a gradual diminution from the Sui dynasty (580–618) to
960-443: A traditional North American lumber industry nomenclature used specifically to indicate the thickness of rough sawn hardwood lumber. In rough-sawn lumber it immediately clarifies that the lumber is not yet milled, avoiding confusion with milled dimension lumber which is measured as actual thickness after machining. Examples – 3 ⁄ 4 -inch, 19 mm, or 1x. In recent years architects, designers, and builders have begun to use
1024-426: A unit of dimensional lumber is limited by the height and girth of the tree it is milled from. In general the maximum length is 24 ft (7.32 m). Engineered wood products, manufactured by binding the strands, particles, fibers, or veneers of wood, together with adhesives, to form composite materials, offer more flexibility and greater structural strength than typical wood building materials. Pre-cut studs save
1088-590: Is a city in, and the parish seat of, Beauregard Parish , Louisiana , United States. A small portion of the city extends into Vernon Parish . As of the 2010 census DeRidder had a population of 10,578. It is the smaller principal city of the DeRidder-Fort Johnson South CSA , a Combined Statistical Area that includes the Fort Johnson South ( Vernon Parish ) and DeRidder (Beauregard Parish) micropolitan areas, which had
1152-406: Is a spiral staircase that leads up to three floors of jail cells. Another history-making fact is that each cell had a toilet, shower, lavatory and window. When the jail was in use, prisoners could often be seen waving from the barred windows. It was built to house 50 or so prisoners, but held 13 in comfort. The walls are 13 to 21 in (0.33 to 0.53 m) thick, made of reinforced concrete with
1216-419: Is available in many species, including hardwoods and softwoods , such as white pine and red pine , because of their low cost. Finished lumber is supplied in standard sizes, mostly for the construction industry – primarily softwood , from coniferous species, including pine , fir and spruce (collectively spruce-pine-fir ), cedar , and hemlock , but also some hardwood, for high-grade flooring. It
1280-543: Is critical, such as trusses , rafters , laminating stock, I-beams and web joints. Machine grading measures a characteristic such as stiffness or density that correlates with the structural properties of interest, such as bending strength . The result is a more precise understanding of the strength of each piece of lumber than is possible with visually graded lumber, which allows designers to use full-design strength and avoid overbuilding. In Europe, strength grading of rectangular sawn lumber/timber (both softwood and hardwood)
1344-633: Is done according to EN-14081 and commonly sorted into classes defined by EN-338. For softwoods, the common classes are (in increasing strength) C16, C18, C24, and C30. There are also classes specifically for hardwoods and those in most common use (in increasing strength) are D24, D30, D40, D50, D60, and D70. For these classes, the number refers to the required 5th percentile bending strength in newtons per square millimetre. There are other strength classes, including T-classes based on tension intended for use in glulam . Grading rules for African and South American sawn lumber have been developed by ATIBT according to
SECTION 20
#17327717497631408-406: Is minimally 1 + 1 ⁄ 2 by 3 + 1 ⁄ 2 inches (38 mm × 89 mm). As previously noted, less wood is needed to produce a given finished size than when standards called for the green lumber to be the full nominal dimension. However, even the dimensions for finished lumber of a given nominal size have changed over time. In 1910, a typical finished 1-inch (25 mm) board
1472-622: Is more commonly made from softwood than hardwoods, and 80% of lumber comes from softwood. In the United States and Canada, milled boards are called lumber , while timber describes standing or felled trees. In contrast, in Britain, and some other Commonwealth nations and Ireland, the term timber is used in both senses. (In the UK, the word lumber is rarely used in relation to wood and has several other meanings.) Re-manufactured lumber
1536-559: Is referred to as timber in the United Kingdom, Europe, Australia, and New Zealand, while in other parts of the world (mainly the United States and Canada) the term timber refers specifically to unprocessed wood fiber , such as cut logs or standing trees that have yet to be cut. Lumber may be supplied either rough- sawn , or surfaced on one or more of its faces. Rough lumber is the raw material for furniture-making, and manufacture of other items requiring cutting and shaping. It
1600-603: Is required. Under the prescription of the Method of Construction (營造法式) issued by the Song dynasty government in the early twelfth century, timbers were standardized to eight cross-sectional dimensions. Regardless of the actual dimensions of the timber, the ratio between width and height was maintained at 1:1.5. Units are in Song dynasty inches (31.2 mm). Timber smaller than the 8th class were called "unclassed" (等外). The width of
1664-459: Is smaller than the nominal dimensions because modern technology makes it possible to use the logs more efficiently. For example, a "2×4" board historically started out as a green, rough board actually 2 by 4 inches (51 mm × 102 mm). After drying and planing, it would be smaller by a nonstandard amount. Today, a "2×4" board starts out as something smaller than 2 inches by 4 inches and not specified by standards, and after drying and planing
1728-422: Is still continued in some places. Otherwise, logs were sawn using a two-person whipsaw, or pit-saw, using saddleblocks to hold the log, and a pit for the pitman who worked below. In 1420 the island of Madeira – an archipelago comprising four islands off the northwest coast of Africa and an autonomous region of Portugal – was discovered. King Henry VI sent settlers to Madeira and
1792-437: Is the result of secondary or tertiary processing of previously milled lumber. Specifically, it refers to lumber cut for industrial or wood-packaging use. Lumber is cut by ripsaw or resaw to create dimensions that are not usually processed by a primary sawmill . Re-sawing is the splitting of 1-to-12-inch (25–305 mm) hardwood or softwood lumber into two or more thinner pieces of full-length boards. For example, splitting
1856-536: Is water. The northern section of the Green Acres subdivision, west of highway 171 on the extreme northwest side of DeRidder, extends into Vernon Parish. Another section of the city, running north along the east side highway 171, up to a parallel with Golden Lantern road, also extends into Vernon Parish. Water and sewage for Green Acres and Country Estates Subdivisions is provided by the independent Green Acres Water & Sewer District #1 The building known as
1920-605: Is well utilised in the construction industry. Attempts to maintain lumber quality over time have been challenged by historical changes in the timber resources of the United States – from the slow-growing virgin forests common over a century ago to the fast-growing plantations now common in today's commercial forests. Resulting declines in lumber quality have been of concern to both the lumber industry and consumers and have caused increased use of alternative construction products. Machine stress-rated and machine-evaluated lumber are readily available for end-uses where high strength
1984-517: The American Lumber Standard Committee , appointed by the U.S. Secretary of Commerce . Design values for most species and grades of visually graded structural products are determined in accordance with ASTM standards, which consider the effect of strength reducing characteristics, load duration, safety, and other influencing factors. The applicable standards are based on results of tests conducted in cooperation with
DeRidder Commercial Historic District - Misplaced Pages Continue
2048-728: The American colonies began in 1607 when the Jamestown settlers cut timber to build the first settlement in the new world. America's first sawmill was built at the Falls of Piscatauqua , on the line between the Province of Maine and the Province of New Hampshire , in 1634. Unauthenticated records, however, claim that as early as 1633 several mills were operating in New Netherland . The American colonies were essential to England in
2112-558: The USDA Forest Products Laboratory. Design Values for Wood Construction, which is a supplement to the ANSI/AF&;PA National Design Specification® for Wood Construction, provides these lumber design values, which are recognized by the model building codes. Canada has grading rules that maintain a standard among mills manufacturing similar woods to assure customers of uniform quality. Grades standardize
2176-721: The United States . The town was named for her by her brother-in-law, who brought the first railroad to that area of Louisiana. Prior to that, the little town was known as Schovall. The first train line to serve DeRidder came in 1897. It was the Pittsburgh & Gulf Railroad, later called the Kansas City Southern . The July 26, 1924, the DeRidder Enterprise stated: "The first house in DeRidder
2240-491: The "Old Beauregard Parish Jail " is a structure built in 1914 that is considered one of the most distinctive of its type in the US. The structure has the characteristics of the collegiate Gothic Revival architectural style, with shallow arches, dormer windows, and a central tower. This style was popular with colleges, universities, and churches. The iron bars in most of the windows give the structure an eerie appearance. Inside, there
2304-404: The "quarter" system in specifications as a vogue of insider knowledge, though the materials being specified are finished lumber, thus conflating the separate systems and causing confusion. Hardwoods cut for furniture are cut in the fall and winter, after the sap has stopped running in the trees. If hardwoods are cut in the spring or summer the sap ruins the natural color of the lumber and decreases
2368-409: The 4×4 (89 mm × 89 mm), are common lumber sizes used in modern construction. They are the basic building blocks for such common structures as balloon-frame or platform-frame housing. Dimensional lumber made from softwood is typically used for construction, while hardwood boards are more commonly used for making cabinets or furniture. Lumber's nominal dimensions are larger than
2432-828: The UK), 2×6 , and 4×4 . The length of a board is usually specified separately from the width and depth. It is thus possible to find 2×4s that are four, eight, and twelve feet in length. In Canada and the United States, the standard lengths of lumber are 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 feet (1.8, 2.4, 3.0, 3.7, 4.3, 4.9, 5.5, 6.1, 6.7 and 7.3 m). For wall framing, precut "stud" lengths are available, and are commonly used. For ceilings heights of 8, 9 or 10 feet (2.4, 2.7 or 3.0 m), studs are available in 92 + 5 ⁄ 8 inches (2.35 m), 104 + 5 ⁄ 8 inches (2.66 m), and 116 + 5 ⁄ 8 inches (2.96 m). The length of
2496-509: The United States began with the publication of the American Lumber Standard in 1924, which set specifications for lumber dimensions, grade, and moisture content; it also developed inspection and accreditation programs. These standards have changed over the years to meet the changing needs of manufacturers and distributors, with the goal of keeping lumber competitive with other construction products. Current standards are set by
2560-422: The actual standard dimensions of finished lumber. Historically, the nominal dimensions were the size of the green (not dried), rough (unfinished) boards that eventually became smaller finished lumber through drying and planing (to smooth the wood). Today, the standards specify the final finished dimensions and the mill cuts the logs to whatever size it needs to achieve those final dimensions. Typically, that rough cut
2624-406: The average family size was 3.03. In the city of DeRidder, the population was spread out, with 27.1% under the age of 18, 8.6% from 18 to 24, 27.3% from 25 to 44, 22.4% from 45 to 64, and 14.5% who were 65 years of age or older. The median age was 37 years. For every 100 females, there were 89.2 males. For every 100 females age 18 and over, there were 83.3 males. The median income for a household in
DeRidder Commercial Historic District - Misplaced Pages Continue
2688-435: The city of DeRidder these schools are: The Beauregard Daily News , a daily newspaper , is based in DeRidder. Timber Lumber is wood that has been processed into uniform and useful sizes (dimensional lumber), including beams and planks or boards . Lumber is mainly used for construction framing , as well as finishing (floors, wall panels , window frames ). Lumber has many uses beyond home building. Lumber
2752-412: The city was $ 31,952, and the median income for a family was $ 39,384. Males had a median income of $ 36,388 versus $ 21,302 for females. The per capita income for the city was $ 16,996. About 15.0% of families and 18.0% of the population were below the poverty line , including 22.1% of those under age 18 and 18.2% of those age 65 or over. Beauregard Parish School Board operates local public schools. For
2816-560: The city. As of the census of 2000, there were 9,808 people, 3,819 households, and 2,616 families residing in the city. The population density was 1,155.4 inhabitants per square mile (446.1/km ). There were 4,454 housing units at an average density of 524.7 units per square mile (202.6 units/km ). The racial makeup of the city was 60.81% White , 34.73% African American , 0.57% Native American , 1.42% Asian , 0.03% Pacific Islander , 0.57% from other races , and 1.88% from two or more races. Hispanic or Latino of any race were 2.40% of
2880-402: The conversion of log timber into planks 30 times faster than previously. The circular saw, as used in modern sawmills, was invented by an Englishman named Miller in 1777. It was not until the nineteenth century, however, that it was generally applied, and its great work belongs to that period. The first insertable teeth for this saw were invented by W. Kendal, an American, in 1826. Logging in
2944-408: The countries with significant sawmilling industries. Historical wood-frame home building regions are: Europe, North America, Japan. Different areas of the world are recognized as significant timber suppliers; however, these areas (Indonesia, Sarawak, New Guinea, etc.) are exporters of raw logs and do not have a significant domestic lumber producing industry. The largest lumber manufacturing regions in
3008-487: The entrance to Fort Johnson and 21 miles (34 km) to Leesville . U.S. Route 190 leads south and east 49 miles (79 km) to Kinder and west 52 miles (84 km) to Jasper, Texas . According to the United States Census Bureau , DeRidder has a total area of 9.2 square miles (23.9 km ), of which 9.2 square miles (23.7 km ) is land and 0.077 square miles (0.2 km ), or 0.96%,
3072-421: The lumber boom ended in 1925, the commercial district was enough developed to survive and avoided DeRidder to become a ghost town . The fact the district was mainly composed by brick buildings helped it remain quite intact, despite numerous fires happened over the years. The historical district contains a total of 27 contributing properties, built between c. 1905 and 1930: DeRidder, Louisiana DeRidder
3136-543: The modern era; a 1st class timber during the Sui was reconstructed as 15×10 (Sui dynasty inches, or 29.4 mm). Defects occurring in lumber are grouped into the following four divisions: During the process of converting timber to commercial forms of lumber the following defects may occur: Fungi attack wood (both timber and lumber) when these conditions are all present: Wood with less than 25% moisture (dry weight basis) can remain free of decay for centuries. Similarly, wood submerged in water may not be attacked by fungi if
3200-491: The most common and widely used method of sawing logs. Plain sawn lumber is produced by making the first cut on a tangent to the circumference of the log. Each additional cut is then made parallel to the one before. This method produces the widest possible boards with the least amount of log waste. Lumber manufacturing globally is determined by the preferred style of building; areas with a "wood building culture" (homes were built from wood rather than other materials like brick) are
3264-409: The population. There were 3,819 households, out of which 33.3% had children under the age of 18 living with them, 48.6% were married couples living together, 16.9% had a female householder with no husband present, and 31.5% were non-families. 28.1% of all households were made up of individuals, and 11.7% had someone living alone who was 65 years of age or older. The average household size was 2.48 and
SECTION 50
#17327717497633328-505: The quality of lumber at different levels and are based on moisture content, size, and manufacture at the time of grading, shipping, and unloading by the buyer. The National Lumber Grades Authority (NLGA) is responsible for writing, interpreting and maintaining Canadian lumber grading rules and standards. The Canadian Lumber Standards Accreditation Board (CLSAB) monitors the quality of Canada's lumber grading and identification system. Their common grade abbrievation, CLS, Canadian Lumber Standard
3392-672: The role of supplier of lumber for the British fleet. By the 1790s, New England was exporting 36 million feet of pine boards and at least 300 ship masts per year to the British Empire. The timber supply began to dwindle at the start of the twentieth century due to significant harvest volumes, so the logging industry was forced to seek timber elsewhere; hence, the expansion into the American West. Logs are converted into lumber by being sawn, hewn , or split . Sawing with
3456-525: The rules of the Sciages Avivés Tropicaux Africains (SATA) and is based on clear cuttings – established by the percentage of the clear surface. In North America, market practices for dimensional lumber made from hardwoods varies significantly from the regularized standardized ' dimension lumber ' sizes used for sales and specification of softwoods – hardwood boards are often sold totally rough cut, or machine planed only on
3520-501: The settlers started clearing the huge expanses of forest in order to grow crops. Felled trees were made into planks by water-powered mills and the timber (cedar and yew) was shipped to Portugal and Spain. About 1427, the first sawmill in Germany was built. Cornelis Corneliszoon (or Krelis Lootjes) was a Dutch windmill owner from Uitgeest who invented the first mechanical sawmill, which was wind-powered, on 15 December 1593. This made
3584-503: The turn of the century, "The largest pine in the world grew where DeRidder now stands - or so it is claimed by timber men who knew." About the origin of the town, she says, "the Kansas City railroad was built from Kansas City to Port Arthur - and came right through here about 1896. By 1898 the trains were running. The post-office was named Miersburg for the postmaster whose name was Miers. The railroad workers had used this spot for
3648-453: The two (broader) face sides. When hardwood boards are also supplied with planed faces, it is usually both by random widths of a specified thickness (normally matching milling of softwood dimensional lumber) and somewhat random lengths. But besides those older (traditional and normal) situations, in recent years some product lines have been widened to also market boards in standard stock sizes; these usually retail in big-box stores and using only
3712-459: The value of the wood for furniture. Engineered lumber is lumber created by a manufacturer and designed for a certain structural purpose. The main categories of engineered lumber are: In the United States, pilings are mainly cut from southern yellow pines and Douglas-fir . Treated pilings are available in chromated copper arsenate retentions of 0.60, 0.80 and 2.50 pounds per cubic foot (9.6, 12.8 and 40.0 kg/m ) if treatment
3776-424: The world are: China (18%); United States (17%); Canada (10%); Russia (9%); Germany (5%); Sweden (4%). In early periods of society, to make wood for building, the trunks of trees were split with wedges into as many and as thin pieces as possible. If it was necessary to have them still thinner, they were hewn, by some sharp instrument, on both sides, to the proper size. This simple but wasteful manner of making boards
3840-525: Was 13 ⁄ 16 in (21 mm). In 1928, that was reduced by 4%, and yet again by 4% in 1956. In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber
3904-516: Was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 inch. Dimensional lumber is available in green, unfinished state, and for that kind of lumber, the nominal dimensions are the actual dimensions. Individual pieces of lumber exhibit a wide range in quality and appearance with respect to knots, slope of grain, shakes and other natural characteristics. Therefore, they vary considerably in strength, utility, and value. The move to set national standards for lumber in
SECTION 60
#17327717497633968-573: Was added to the National Register of Historic Places in 1983. The nearby Beauregard Parish Courthouse and Beauregard Parish Jail were not included in the historic district as not directly related to the commercial history of the town. The DeRidder Commercial Historic District has been the trading center of the parish since about 1905. From 1918 to 1920 several buildings, including the First National Bank, were built. When
4032-533: Was made of logs and covered with board shingles, split by hand from the logs of the forest. It was constructed in 1893 and was the old homestead house of Calvin Shirley, who was the original owner of the land upon which the first business house and residence of DeRidder were built. Mr. Shirley homesteaded the 160 acres (0.65 km ) which was later platted and became the original townsite of DeRidder." According to Eva Stewart Frazar, whose family came to DeRidder near
4096-657: Was used until 1982, when a court action forced it to close. On October 4, 1981, it was put on the National Register of Historic Places , along with several other buildings in DeRidder. In 1983 Washington, Second, Stewart, and Port streets were added to the National Register of Historic Places listings in Beauregard Parish as the DeRidder Commercial Historic District . As of the 2020 United States census , there were 9,852 people, 3,838 households, and 2,510 families residing in
#762237