Misplaced Pages

Shot Tower

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
#747252

5-445: A shot tower is used for the production of lead shot. Places named Shot Tower include: Shot tower A shot tower is a tower designed for the production of small-diameter shot balls by free fall of molten lead , which is then caught in a water basin. The shot is primarily used for projectiles in shotguns , and for ballast , radiation shielding , and other applications for which small lead balls are useful. In

10-433: A shot tower, lead is heated until molten, then dropped through a copper sieve high in the tower. The liquid lead forms tiny spherical balls by surface tension , and solidifies as it falls. The partially cooled balls are caught at the floor of the tower in a water -filled basin. The now fully cooled balls are checked for roundness and sorted by size; those that are "out of round" are remelted. A slightly inclined table

15-549: A small amount of graphite is necessary for lubrication and to prevent oxidation . The process was invented by William Watts of Bristol , England, and patented in 1782. The same year, Watts extended his house in Redcliffe to build the first shot tower . Use of shot towers replaced earlier techniques of casting shot in moulds, which was expensive, or of dripping molten lead into water barrels, which produced insufficiently spherical balls. Large shot which could not be made by

20-402: Is used for checking roundness. To make larger shot sizes, a copper sieve with larger holes is used. The maximum size is limited by the height of the tower, because larger shot sizes must fall farther to solidify. A shot tower with a 40-meter drop can produce up to #6 shot (nominally 2.4mm in diameter) while an 80-meter drop can produce #2 shot (nominally 3.8mm in diameter). Polishing with

25-416: The shot tower was made by tumbling pieces of cut lead sheet in a barrel until round. The "wind tower" method, which used a blast of cold air to dramatically shorten the drop necessary and was patented in 1848 by the T.O LeRoy Company of New York City, meant that tall shot towers became unnecessary, but many were still constructed into the late 1880s, and two surviving examples date from 1916 and 1969. Since

#747252