Misplaced Pages

#160839

75-680: The Peel Trident is the second three-wheeled microcar built by the Peel Engineering Company on the Isle of Man . An all-new design from its one-seat counterpart the Peel P50 , the Trident has two seats. The Trident was launched at the 1964 British Motorcycle Show held at Earls Court . The seat, stated as being 31 in (79 cm) wide, was intended to provide for use as an occasional two-seater. A completely new design from

150-408: A 70% increase). Ten-inch (254 mm) wheels were specified, so new tyres had to be developed, the initial contract going to Dunlop . Issigonis went to Dunlop stating that he wanted even smaller, 8 in (203 mm) wheels (even though he had already settled on 10-inch). An agreement was made on the 10-inch size, after Dunlop rejected the eight-inch proposition. Many features were designed into

225-480: A brand new Mercedes-Benz 190E . Manufacturers include Pocket Classics , the Little Car Company , Eshelman , and Hackney . There are also a variety of microcar trucks, usually of the "forward control" or van style to provide more cargo room. These might be used for local deliveries on narrow streets that are unsuited to larger vehicles. The Piaggio Ape is a three-wheeled example. The Honda Acty

300-580: A catalytic converter and produce 45 kW (60 hp; 61 PS) at 5500 rpm. Power crept up to 46 kW (62 hp; 63 PS) at 5700 rpm for the fuel injected model. An internal bonnet release was fitted from 1992. By 1991, the Cooper represented forty percent of Mini sales in the home market; the main export market was Japan. Production ended in August 1996 as the Mark VII replaced it. In

375-540: A detachable shopping basket . The Lakeland Motor Museum observes that the Trident's bubble top constituted grounds for its sobriquet "The Terrestrial Flying Saucer." Like its predecessor, it was marketed as a "shopping car" or a "Saloon Scooter". The car is 73 in (185 cm) long and 39 in (99 cm) wide, with a weight of 330 lb (150 kg). Like the P50, it uses a 49 cc (3.0 cu in) DKW engine which generates 4.2 hp (3.1 kW), and

450-453: A front rubber-mounted subframe with single tower bolts and the rear frame had some larger bushings introduced, all intended to improve the car's mechanical refinement and to reduce noise levels. Twin column stalks for indicators and wipers were introduced, as were larger foot pedals. From 1977 onwards, the rear light clusters included reversing lights. In July 1979 the lower end of the Mini range

525-521: A hatchback. The Metro was therefore in essence, the Mini mechanicals repackaged into a larger hatchback bodyshell. Although the Mini continued to be produced after the Metro's launch, production volumes were reduced as British Leyland and its successor Rover Group concentrated on the Metro as its key supermini. The original Mini's last year in the top ten of the UK's top selling cars was 1981, as it came ninth and

600-522: A marque in its own right. The Morris version was known to all as "the Mini" or the "Morris Mini-Minor". This seems to have been a play on words: the Morris Minor was a larger, well known, and successful car that continued in production, and minor is Latin for "lesser", so an abbreviation of the Latin word for "least" – minimus  – was used for the new even smaller car. One name proposed for

675-499: A rectangular centre from the Innocenti Mini hatchback. The 1100 Special and 850 City models were phased out by 1980, and during the same year the engine was upgraded to the improved A-Plus unit from the new Metro in 998cc form, which was now the only engine available in the Mini. This was then followed by a number of incremental developments. In 1978, the Mini was one of the key cars made available to disabled motorists under

750-420: A standard model with the same name. However this was the first time a UK-market 'round-nose' (i.e. non-Clubman) Mini had been available with the 1098cc engine, and the UK limited edition was also fitted with unique Exacton alloy wheels – the first time these were fitted to a factory-produced Mini – and plastic wheelarch extensions. Inside was the 1275GT's three-dial instrument cluster and a leather-rimmed wheel with

825-463: A top speed of 28 mph (45 km/h). It was advertised that the Trident got 100 miles per imperial gallon (2.8 L/100 km; 83 mpg ‑US ), "almost cheaper than walking". The original retail price was £190. All engines supplied to Peel from Zweirad Union (for both the P50 and Trident) were of the 49 cc 3-speed 4.2 hp 804–1600 type. Uniquely, however, the Peel engines had

SECTION 10

#1732790968161

900-458: A very small economy car. His initial work was on the largest car, designated XC9001, with the smallest car, XC9003, having the lowest priority despite it being Issigonis' greatest personal interest. With Lord's dictum to produce a bubble car competitor and his revised design requirements being laid down in October 1956, work on XC9001 stopped and XC9003 became the priority. In addition to Issigonis,

975-531: Is a four-wheeled example. Mini The Mini (developed as ADO15 ) is a small, two-door, four-seat car produced by the British Motor Corporation (BMC) and its successors, from 1959 until 2000. Minus a brief hiatus, original Minis were built for four decades and sold during five, from the last year of the 1950s into the last year of the 20th century, over a single generation, as fastbacks, estates, and convertibles. The original Mini

1050-465: Is an engine displacement of less than 700 cc (43 cu in), although several cars with engines up to 1,000 cc (61 cu in) have also been classified as microcars. Often, the engine was originally designed for a motorcycle. Microcars originated in the years following World War II , when motorcycles transport was commonly used. To provide better weather protection, three-wheeled microcars began increasing in popularity in

1125-743: Is considered an icon of 1960s British popular culture . Its space-saving transverse engine and front-wheel drive layout – allowing 80% of the area of the car's floorpan to be used for passengers and luggage – influenced a generation of car makers. In 1999, the Mini was voted the second-most influential car of the 20th century , behind the Ford Model T , and ahead of the Citroën DS and Volkswagen Beetle . The front-wheel-drive, transverse-engine layout were used in many other "supermini" style car designs such as Honda N360 (1967), Nissan Cherry (1970), and Fiat 127 (1971). The layout

1200-780: Is often called a microcar in the United States; although it requires a regular licence to drive. The European Union introduced the quadricycle category in 1992. In several European countries since then, microcars are classified by governments separately from normal cars, sometimes using the same regulations as motorcycles or mopeds . Therefore, compared with normal cars, microcars often have relaxed requirements for registration and licensing, and can be subject to lower taxes and insurance costs. Junior cars are motorized cars for children, typically copies of real designs. Originally powered either by electric engines or small internal combustion engines, electric engines currently dominate. From

1275-596: The Authi company from 1968 onwards, mostly under the Morris name. In 1969, a fibreglass version of the Mini Mark II was developed for British Leyland's Chilean subsidiary (British Leyland Automotores de Chile, S.A., originally the independent assembler EMSSA). The bodyshell mould was created by the Peel Engineering Company . Production began in 1970 and continued for a few years; these fibreglass Minis can be recognised by

1350-970: The Heinkel Kabine and the Isetta . The British version of the Isetta was built with only one rear wheel, instead of the narrow-tracked pair of wheels in the normal Isetta design, in order to take advantage of the three-wheel vehicle laws in the United Kingdom. There were also indigenous British three-wheeled microcars, including the Peel Trident . Examples include the Citroën Prototype C , FMR Tg500 , Fuldamobil , Heinkel Kabine , Isetta , Messerschmitt KR175 , Messerschmitt KR200 , Peel P50 , Peel Trident , SMZ S-1L , Trojan 200 , and Kleinschnittger F125 . Recent microcars include

1425-449: The Mini name . Retrospectively, the car is known as the "Classic Mini" to distinguish it from the modern, BMW-influenced MINI family of vehicles produced since 2000. The Mini came about because of a fuel shortage caused by the 1956 Suez Crisis . Petrol was once again rationed in the UK, sales of large cars slumped, and the market for German bubble cars boomed, even in countries such as

1500-466: The 10-foot (3.0 m) length; and the engine, for reasons of cost, should be an existing unit. Alec Issigonis , who had been working for Alvis , had been recruited back to BMC in 1955 with a brief from Lord to design a range of technically advanced family cars in the same innovative spirit as his earlier Morris Minor to complement BMC's existing conventional models. Issigonis had set out design projects for three cars – large and small family cars and

1575-579: The 1926 Baby Bugatti until today, junior cars are often as expensive as a real car and are built to a higher standard than a ride-in toy car. As with the Bugatti, these are frequently sold directly by real car manufacturers such as Porsche and Ferrari. In the 1990s Aston Martin built a half-scale junior car version of the then-new Aston Martin Virage Volante , with a handmade aluminium body, leather interior, and 160-cc Honda engine. It cost as much as

SECTION 20

#1732790968161

1650-469: The 2001 Aixam 5xx series, Renault Twizy , Citroën Ami , and XEV Yoyo . Electric-powered microcars which have reached production include the 1987 CityEl , the 1990 Automobiles ERAD Spacia, the 1999 Corbin Sparrow , the 2001 REVAi , the 2005 Commuter Cars Tango , the 2009 Tazzari Zero and the resurrected Peel P50 of 2011 (the original model of 1962 - 65 being petrol powered). The Smart Fortwo

1725-452: The 8th digit as a 4, thus being of the form 80416004***. This car is one of the smallest in the world. Microcar Voiturette is a term used by some small cars and tricycles manufactured from 1895 to 1910. Cyclecars are a type of small, lightweight and inexpensive car manufactured mainly between 1910 and the late 1920s. The first cars to be described as microcars (earlier equivalents were called voiturettes or cyclecars) were built in

1800-471: The ADO15's interior to maximise its passenger and luggage space on top of the major savings allowed by the transverse engine and 10-inch wheels. Sliding windows allowed single-skin doors to be fitted, improving elbow room and reducing costs. A bracing bar was fitted across the door frame to brace the single skin and this was later adapted into a large storage bin on each door. Issigonis later said that he had sized

1875-749: The Austin Partner (until 1964) and Morris Mascot (until 1981). It was introduced in Australia as Morris 850 only (not "Austin"), and then later as Morris Cooper and Morris Cooper S versions, as well. The Morris name Mini (Mini-Minor) was first used for Austin's version by BMC in 1961 when the Austin Seven was rebranded as the Austin Mini, somewhat to the surprise of the Sharp's Commercials car company (later known as Bond Cars), who had been using

1950-562: The BMC must have been losing around £30 per car, so decided to produce a larger car – the Cortina , launched in 1962 – as its competitor in the budget market. BMC insisted that the way company overheads were shared out, the Mini always made money. Larger profits came from the popular De Luxe models and from optional extras such as seat belts, door mirrors, a heater, and a radio, which would be considered necessities on modern cars, as well as

2025-517: The City was the new 850 SDL (Super Deluxe), which had the same specification as the standard Mini 1000 but with the smaller engine. For August 1979 the Mini's 20th anniversary was marked by the introduction of the first true limited-edition Mini, which was the Mini 1100 Special. This was a 5,000-car run with the 1098cc engine, broadly to the specification already in production for the European market as

2100-521: The Clubman). The most obvious changes were larger doors with concealed hinges. Customer demand led to the sliding windows being replaced with winding windows, although all Australian-manufactured Mark I Minis had adopted this feature in 1965 (with opening quarterlight windows). The suspension reverted from hydrolastic to rubber cones as a cost-saving measure. (The 1275 GT and Clubman retained the hydrolastic system until June 1971, when they, too, switched to

2175-539: The Metro was fifth. The arrival of the Metro also had production of the larger Allegro pruned back before it was finally discontinued in 1982. In 1982, BL made 56,297 Minis and over 175,000 Metros. Due to their common powertrain package, the Mini received many mechanical upgrades in the early 1980s which were shared with the Metro, such as the A-Plus engine , 12-inch wheels with front disc brakes, improved soundproofing and quieter, stronger transmissions. This not only modernised

2250-685: The Mini was produced by Innocenti in Milan and it was sold under the "Innocenti Mini" marque. Innocenti was also producing Lambretta scooters at that time. The Mini Mark I had three major UK updates: the Mark II, the Clubman, and the Mark III. Within these was a series of variations, including an estate car , a pick-up , a van, and the Mini Moke , a jeep -like buggy. The performance versions,

2325-683: The Mini Cooper and Cooper "S", were successful as both race and rally cars , winning the Monte Carlo Rally in 1964, 1965, and 1967. In 1966, the first-placed Mini (along with nine other cars) was disqualified after the finish, under a controversial decision that the car's headlights were against the rules. In August 1959, the Mini was marketed under the Austin and Morris names, as the Austin Seven and Morris Mini-Minor. The Austin Seven

Peel Trident - Misplaced Pages Continue

2400-423: The Mini but, because many of its major subassemblies were now shared with the Metro, made it very cost-effective to produce despite falling sales volumes. All cars had 8.4-inch (210 mm) brake discs and plastic wheel arches (Mini Special arches), but retained the same Mark IV body shell shape. The Mini's 25th anniversary fell in 1984 and British Leyland produced a 'Mini 25' limited-edition model, both to mark

2475-612: The Mini continually popular as a first car for younger drivers, and Austin-Rover introduced a steady stream of limited editions with bright paint colours, body graphics, and trim to appeal to this market. The Mini was also becoming prized as a characterful and nostalgic car in its own right, and the London Collection of limited-edition models was more upmarket and luxurious and named after affluent or fashionable parts of London. These marketing strategies proved very successful; Mini production actually had modest increases through

2550-537: The Mini platform. Bertone also created a Mini Cooper equivalent, christened the Innocenti De Tomaso , that sported a 1275-cc engine similar to the MG Metro engine, but with an 11-stud head, a special inlet manifold, and used the "A" clutch instead of the "Verto" type. It also used homokinetic shafts instead of rubber couplings. The Mini was still popular in the UK, but appeared increasingly outdated in

2625-495: The United Kingdom and Germany following World War II, and remained popular until the 1960s. They were originally called minicars, but later became known as microcars. France also produced large numbers of similar tiny vehicles called voiturettes , but they were rarely sold abroad. Microcars have three or four wheels, although most were three-wheelers which, in many countries, meant that they qualified for lower taxes and were licensed as motorcycles . Another common characteristic

2700-417: The United Kingdom, where imported cars were still a rarity. Leonard Lord , the head of BMC, reportedly detested these cars so much that he vowed to rid the streets of them and design a 'proper miniature car'. He laid down some basic design requirements – the car should be contained within a box that measured 10×4×4 feet (3.0×1.2×1.2 m); and the passenger accommodation should occupy 6 feet (1.8 m) of

2775-474: The United Kingdom, where they could be driven using only a motorcycle licence. One of the first microcars was the 1949 Bond Minicar . Microcars also became popular in Europe. A demand for cheap personal motorised transport emerged, and their greater fuel efficiency meant that microcars became even more significant when fuel prices rose, partly due to the 1956 Suez Crisis . The microcar boom lasted until

2850-654: The almost identical Austin version was Austin Newmarket, but it was sold as the Austin Seven (sometimes written as SE7EN in early publicity material – with the '7' using the letter V rotated anticlockwise so it approximated the number 7), which recalled the popular small Austin 7 of the 1920s and 1930s. Until 1962, the cars appeared in North America and France as the Austin 850 and Morris 850, and in Denmark as

2925-419: The bins to carry the ingredients of his favourite drink, a dry martini in the correct proportions (one bottle of vermouth and 2 of Gordon's Gin ). Similar bins were provided outboard of the rear seats, also serving a dual function of bracing the single-skin body panel. Small items could also be stowed under the rear seats, and early Minis were sold with optional wicker baskets specially shaped to slot under

3000-452: The cabin space, and required no maintenance. The conical shape gave the springs a progressive action, becoming stiffer at greater degrees of compression. This gave the ADO15 a smooth ride over small bumps, but minimised roll and pitch on more uneven surfaces. It also allowed the springs to cope with the huge variance in load between an unladen car (about 600 kg or 1300 lb) and a fully laden one (just over 1000 kg or 2240 lb, or

3075-465: The design and production of the Mini. The Mini shape had become so well known that by the 1990s, Rover Group  – the heirs to BMC – were able to register its design as a trademark in its own right. The production version of the Mini was demonstrated to the press in April 1959, and by August, several thousand cars had been produced ready for the first sales. The Mini was officially announced to

Peel Trident - Misplaced Pages Continue

3150-407: The disadvantage of feeding the radiator with air that had been heated by passing over the engine. It also exposed the entire ignition system to the direct entry of rainwater through the grille. Early prototypes used the existing 948-cc A-Series unit, but this provided the ADO15 with performance far greater than its price and purpose required – a top speed of about 80 mph (129 km/h). The engine

3225-477: The drivetrain and suspension for the front and rear. This also simplified production, as both subframes could be built up independently and then mated to the already-completed bodyshell. It also opened up the possibility of easily producing variants on the ADO15 as a body of any shape or design could be used provided it could accommodate the subframes. In 1959, BMC and Alec Issigonis won the Dewar Trophy , for

3300-573: The earlier side-engined Peel P50 microcar, the Trident was manufactured in 1965 and 1966. In 2011, Peel Engineering Ltd. reinstated manufacture of the Peel Trident and P50, in Sutton-in-Ashfield , near Nottingham , England. All vehicles are hand-built to order in petrol and electric form. The glass-fibre shell was a monocoque with coil-sprung, undamped wheels. It featured a clear bubble top and either two seats or one seat with

3375-429: The engine-oil lubricated, four-speed transmission in the sump , and by employing front-wheel drive . Drive was taken down to the transmission via a conventional clutch coupled to a set of primary gears on the end of the crankshaft which gave rise to the characteristic transmission "whine" for which the Mini became famous. Almost all small front-wheel drive cars developed since have used a similar configuration, except with

3450-423: The face of newer and more practical rivals. Since the late 1960s, plans had been in place for a newer and more practical supermini to replace it, though the Mini was still the only car of this size built by British Leyland for the home market. The Mark IV was introduced in 1976, though by this stage British Leyland was working on a new small car which was widely expected to replace the Mini before much longer. It had

3525-515: The front seat occupants . To further simplify construction, the hinges for the doors and boot lid were mounted externally. This also saved a small amount of cabin space. It also made the ADO15 very easy to assemble from complete knock-down kits in overseas markets with only basic industry. Cars could be assembled with minimal use of jigs as the external seams made the panels largely 'self-aligning'. They also allowed panels to be stacked flat on top of one other for easy shipping. As originally built, all

3600-443: The late 1950s, when larger cars regained popularity. The 1959 introduction of the Mini , which provided greater size and performance at an affordable price, contributed to the decline in popularity of microcars. Production of microcars had largely ceased by the end of the 1960s, due to competition from the Mini , Citroën 2CV , Fiat 500 and Renault 4 . Several microcars of the 1950s and 1960s were nicknamed bubble cars . This

3675-412: The layouts). Together, by July 1957, they had designed and built the original XC9003 prototype, which was affectionately named the "Orange Box" because of its colour. Leonard Lord approved the car for production on 19 July and XC9003 became project ADO15 . The ADO15 used a conventional BMC A-Series four-cylinder, water-cooled engine, but departed from tradition by mounting it transversely , with

3750-399: The mechanically interconnected Citroën 2CV suspension at that time (according to an interview by Moulton with Car Magazine in the late 1990s), which inspired the design of the hydrolastic suspension system for the Mini and Morris/Austin 1100, to try to keep the benefits of the 2CV system (ride comfort, body levelling, keeping the roadwheel under good control and the tyres in contact with

3825-609: The mid-1980s, from 34,974 Minis in 1984 to 35,280 in 1985 and 39,800 in 1986. In 1990, the Mini Cooper was relaunched - 20 years after the demise of the original model - which saw Mini production pass 40,000. Once again, it featured the long-running 1275-cc engine which had featured on the original Mini Cooper S. In 1988, Austin Rover decided to keep the Mini in production for as long as it was viable to do so, putting an end to reports that it would be discontinued by 1991, by which time

SECTION 50

#1732790968161

3900-464: The missing body seams and by larger panel gaps. The Chilean market was never very large and the Arica plant was closed in 1974. The reason for the fibreglass body was to enable Leyland to meet very strict requirements for local sourcing, increasing to 70.22% in 1971. The Mark III Mini had a modified bodyshell with enough alterations to see the factory code change from ADO15 to ADO20 (which it shared with

3975-414: The name Minicar for their three-wheeled vehicles since 1949. However, legal action was somehow averted, and BMC used the name "Mini" thereafter. In 1964, the suspension of the cars was replaced by another Moulton design, the hydrolastic system. The new suspension gave a softer ride, but it also increased weight and production cost. In 1971, the original rubber suspension reappeared and was retained for

4050-739: The new Motability scheme. Reports of the Mini's imminent demise surfaced again in 1980 with the launch of the Austin Mini-Metro (badging with the word "mini" in all lowercase). Faced with competition from a new wave of modern superminis like the Ford Fiesta , Renault 5 , and Volkswagen Polo , the Mini was beginning to fall out of favour in many export markets, with the South African, Australian, and New Zealand markets all stopping production around this time. Buyers of small cars now wanted modern and practical designs, usually with

4125-527: The occasion and to publicise the recent upgrades to the model. This marked the start of a turnaround in the Mini's fortunes. Basic models such as the City and the City E (using the economy-tuned drivetrain from the Metro HLE) filled in the bottom of the Austin-Rover range and still found buyers who wanted a compact city car that was easy to park and cheap to run. Low purchase and running costs also made

4200-633: The original Metro would also be replaced. With the larger Metro being redesigned in 1990 to take the new K-Series engine, the Mini became the sole recipient of the classic A-Series engine with transmission-in-sump layout. The engine mounting points were moved forward to take 1275-cc power units, and includes the later Horizontal Integral Float version of the SU carb , and also the single-point fuel-injection version, which came out in November 1991. The 998-cc power units were discontinued. Early, carburetted Coopers had

4275-460: The original shelf, internal bonnet release. Introduction of airbag on driver's side. The basic Mini was the 1.3i, the other model in the range being the Mini Cooper. The end of production in October 2000 not only signalled the end of original Mini production after 41 years, but also brought about the demise of the 1275-cc engine which had powered the Mini and numerous other BL/BMC/ARG cars for more than 35 years. The Metro had ceased production two and

4350-747: The public on 26 August 1959. Some 2,000 cars had already been sent abroad and were displayed that day in almost 100 countries. The key dimensions were: The first example, a Morris Mini-Minor with the registration 621 AOK, is on display at the Heritage Motor Centre in Warwickshire. Another early example from 1959 is on display at the National Motor Museum in Hampshire . The Mini was marketed under BMC's two main brand names, Austin and Morris, until 1969, when it became

4425-501: The remaining life of the Mini. From October 1965, the option of the unique Automotive Products designed four-speed automatic transmission became available. Cars fitted with this became the Mini-Matic. Slow at the outset, Mark I sales strengthened across most of the model lines in the 1960s, and production totalled 1,190,000. Ford purchased a Mini and dismantled it to see if they could offer an alternative. Ford determined that

4500-523: The road), but with added roll stiffness that the 2CV lacked. The short development time of the car meant this was not ready in time for the Mini's launch. The system intended for the Mini was further developed and the hydrolastic system was first used on the Morris 1100 , launched in 1962; the Mini gained the system later in 1964. As launched, the Mini had simpler suspension made from conical springs of solid rubber. These were compact, saving on intrusion into

4575-499: The rubber cone suspension of the original Minis. ) In 1969, the simple name Mini completely replaced the separate Austin and Morris brands. In April 1974, a heater became standard equipment on the entry-level Mini 850, as well, having by then already been included in the standard specification of the other models for some time. In the late 1970s, Innocenti introduced the Innocenti 90 and 120 , Bertone -designed hatchbacks based on

SECTION 60

#1732790968161

4650-404: The rubber cone system gave a raw and bumpy ride accentuated by the woven-webbing seats, but the rigidity of the rubber cones, together with the wheels' positioning at the corners of the car, gave the Mini go kart -like handling. Initially, an interconnected fluid system was planned, similar to the one that Alec Issigonis and Alex Moulton were working on in the mid-1950s at Alvis. They had assessed

4725-406: The seats. The fixed rear parcel shelf contributed to the rigidity of the body shell, although it did preclude fitting the ADO15 with a hatchback . The boot lid was hinged at the bottom so that the car could be driven with it open to increase luggage space. On early cars, the number plate , together with its light, was hinged at the top so that it could swing down to remain visible when the boot lid

4800-421: The structural body panels were welded to the top of the single floor pressing, but this caused major problems with water entering the cabin and was quickly changed in the first months of production. Early prototypes were fully unitary in construction, but the cars broke apart under the high loads from the large lever ratios used with the rubber cone suspension. The design was changed to use steel subframes to carry

4875-572: The summer of 1991, 21 years after the fibreglass Mini built in Chile was produced, another fibreglass bodied Mini again entered production, this time in Venezuela. The producer, Facorca, intended to sell the car in the Caribbean and Central America, and also had plans for Brazilian assembly. This was the final version, twin point injection with front-mounted radiator. Full-width dashboard replaces

4950-461: The team that developed the Mini included John Sheppard (who had worked with Issigonis at Alvis), Jack Daniels (who had worked with Issigonis on the Morris Minor), Chris Kingham (also from Alvis), Charles Griffin (from Cowley), Vic Everton (from the body—jig shop), Ron Dovey (who built the bodies), Dick Gallimore (who laid out the experimental bodies), and George Cooper (whose job was to check

5025-408: The transmission separately enclosed rather than using the engine oil and mounted directly onto the end of the crankshaft, but with unequal length driveshafts. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so that it blew air into the natural low pressure area under the front wing. This location saved vehicle length, but had

5100-575: The various Cooper and Cooper S models. The Mini entered into popular culture in the 1960s with well-publicised purchases by film and music stars. The Cooper S version was also used by some British police forces as both a uniform and plainclothes car. The Mark II Mini was launched at the 1967 British Motor Show , and featured a redesigned grille, a larger rear window and numerous cosmetic changes. A total of 429,000 Mk II Minis were produced. A variety of Mini types were made in Pamplona , Spain, by

5175-894: Was also adapted for larger subcompact designs. This distinctive two-door car was designed for BMC by Sir Alec Issigonis . It was manufactured at the Longbridge plant in Birmingham, England located next to BMC's headquarters and at the former Morris Motors plant at Cowley near Oxford, in the Victoria Park/Zetland British Motor Corporation (Australia) factory in Sydney , Australia, and later also in Spain ( Authi ), Belgium, Italy ( Innocenti ), Chile, Malta, Portugal, South Africa, Uruguay, Venezuela, and Yugoslavia ( IMV ). The Italian version of

5250-496: Was altered. The basic Mini 850 (which had featured in various forms since the original launch 20 years before) was withdrawn. Its place was taken by two models at slightly lower and slightly higher price points. The new base model was the Mini City, with black-painted bumpers, an untrimmed lower facia rail, part-fabric seats and wing mirror and sun visor only on the driver's side, plus unique 'City' body graphics and boot badge. Above

5325-404: Was better than many other economy cars of the time. The suspension system, designed by Issigonis's friend Alex Moulton at Moulton Developments Limited , used compact rubber cones instead of conventional springs. This space-saving design also featured rising progressive-rate springing of the cones, and provided some natural damping, in addition to the normal dampers. Built into the subframes,

5400-735: Was due to the aircraft-style bubble canopies of vehicles such as the Messerschmitt KR175 , Messerschmitt KR200 and the FMR Tg500 . Other microcars, such as the Isetta , also had a bubble-like appearance. German manufacturers of bubble cars included former military aircraft manufacturers Messerschmitt and Heinkel . BMW manufactured the Italian Iso Rivolta Isetta under licence, using an engine based on one from one of their own motorcycles. The United Kingdom had licence-built right-hand-drive versions of

5475-512: Was open. This feature was later discontinued after it was discovered that exhaust gases could leak into the cockpit when the boot was open. The Mini was designed as a monocoque shell with welded seams visible on the outside of the car running down the A and C pillars , and between the body and the floor pan. Those that ran from the base of the A-pillar to the wheel well were described as 'everted' (lit., 'turned outward') to provide more room for

5550-490: Was reduced to a new 848-cc capacity with a shorter stroke . This reduced power from 37 to 33 bhp and caused a significant drop in torque , so provided more realistic performance, especially when the ADO15 body was widened by 2 inches (5.08 cm) over the XC9003 prototype, which blunted the car's top speed while improving its stability and roadholding. Even so, the ADO15 had a top speed of 75 mph (121 km/h), which

5625-514: Was renamed Austin Mini in January 1962 and Mini became a marque in its own right in 1969. In 1980, it once again became the Austin Mini, and in 1988, just "Mini" (although the "Rover" badge was applied on some models exported to Japan). BMW acquired the Rover Group (formerly British Leyland ) in 1994, and sold the greater part of it in 2000, but retained the rights to build cars using

#160839