Tack is equipment or accessories equipped on horses and other equines in the course of their use as domesticated animals. This equipment includes such items as saddles , stirrups , bridles , halters , reins , bits , and harnesses. Equipping a horse is often referred to as tacking up, and involves putting the tack equipment on the horse. A room to store such equipment, usually near or in a stable , is a tack room .
101-609: Reins are items of horse tack used to direct a horse (or other animal) for riding or driving . They are long straps that can be made of leather , nylon , or other materials, and attach to a bridle via either its bit or its noseband . Reins are used to give subtle commands or cues, also known as rein aids . Various commands may signal a turn, ask for a slower speed, request a halt or rein back . Rein aids are used along with leg aids, shifting of body weight, and sometimes voice commands. On some types of driving harness there might be supporting rings—called terrets—which carry
202-594: A cavesson style noseband and are seen in English riding . Their reins are buckled to one another, and they have little adornment or flashy hardware. Western Bridles used in Western riding usually have no noseband , are made of thin bridle leather. They may have long, separated "Split" reins or shorter closed reins, which sometimes include an attached Romal . Western bridles are often adorned with silver or other decorative features. Double bridles are
303-727: A "Park," "Lane Fox" or "cutback," is a variation on the English show saddle. It is seen most often in the USA and Canada, but also on occasion in South Africa and other parts of the world. It is used most often on the high-action and gaited horses of the Americas. Gaited breeds using this saddle include the American Saddlebred , Tennessee Walking Horse , and Missouri Foxtrotter . Non-gaited but action-oriented breeds such as
404-405: A "horn" or "head") and the "leaping horn" or "leaping head". Although there are some sidesaddles that lack a leaping horn, they are not considered safe by modern standards. Both pommels allow the rider to stay in place, even when jumping. In fact, it may be difficult for the rider to be thrown free should the horse fall. The vast majority of sidesaddles are designed so riders sit with both legs on
505-482: A chain attached to the lead rope and placed over the nose or under the jaw to increase the control provided by a halter while being led. Most of the time, horses are not ridden with a halter, as it offers insufficient precision and control. Halters have no bit. In Australian and British English, a halter is a rope with a spliced running loop around the nose and another over the poll, used mainly for unbroken horses or for cattle . The lead rope cannot be removed from
606-415: A deep seat and extra leather to protect horse and rider, but lack a horn. The other major characteristic which defines an English saddle is that it has panels : these are a pair of pads attached to the underside of the seat and filled with wool , foam, or air. Although some modern saddlers have developed alternative models, the English saddle is usually constructed on a framework known as a tree . The tree
707-454: A design that uses airtight sealed panels that are inflated with air. During the 18th century, most riders in Europe used high-pommel and cantle saddles, with a wooden frame for classical dressage . This saddle was based on a model used for bull fighting , cattle work, long-distance travel, and mounted combat, as its high pommel and cantle helped to provide the rider with support. This saddle
808-415: A driving rein. A bit is a device placed in a horse's mouth, kept on a horse's head by means of a headstall. There are many types, each useful for specific types of riding and training. The mouthpiece of the bit does not rest on the teeth of the horse , but rather rests on the gums or "bars" of the horse's mouth in an interdental space behind the front incisors and in front of the back molars . It
909-407: A frozen metal bit into a horse's mouth. Like bitted bridles, noseband-based designs can be gentle or harsh, depending on the hands of the rider. It is a myth that a bit is cruel and a hackamore is gentler. The horse's face is very soft and sensitive with many nerve endings. Misuse of a hackamore can cause swelling on the nose, scraping on the nose and jawbone, and extreme misuse may cause damage to
1010-577: A heavy noseband of some sort, rather than a bit, most often used to train young horses or to go easy on an older horse's mouth. Hackamores are more often seen in western riding . Some related styles of headgear that control a horse with a noseband rather than a bit are known as bitless bridles . The word " hackamore " is derived from the Spanish word jáquima. Hackamores are seen in western riding disciplines, as well as in endurance riding and English riding disciplines such as show jumping and
1111-619: A horn as well. These saddles can still be classified as western-influenced, however, due to the deep seat, high cantle, prominent pommels, wide fenders (stirrup leathers) and large, leather-covered stirrups. In addition, saddles used for working cattle in nations other than the United States, such as the Australian Stock Saddle and the Charro Saddles of South America, often share stock saddle features such as
SECTION 10
#17327915690591212-435: A horse's neck used to guide the horse during bridleless riding or groundwork. Reins consist of leather straps or rope attached to the outer ends of a bit and extend to the rider's or driver's hands. Reins are the means by which a horse rider or driver communicates directional commands to the horse's head. Pulling on the reins can be used to steer or stop the horse. The sides of a horse's mouth are sensitive, so pulling on
1313-404: A horse-sized saddle placed on a pony ) also cause problems for horse and rider, including: A saddle must be measured for width, length, and front arch height (clearance over the withers). In ideal circumstances, the saddle is tried on the horse prior to purchase, or is purchased with a return option if it does not fit. When saddle shopping, or if having a saddle custom-made, one method of sizing
1414-543: A jumping saddle, said to assist the rider in keeping the knee down and thigh back. However, there is usually little padding behind the calf, as the rider needs to be able to freely move the lower leg to give aids to the horse. The billets of most dressage saddles are very long, to allow the girth to be buckled near the horse's elbow rather than underneath the rider's leg (which would get in the way of giving effecting leg aids). However, some dressage saddles come with shorter billets. The saddle seat saddle, also sometimes called
1515-600: A more forward flap that allows a rider to jump somewhat more challenging fences, but still permit a deep seat for flat work. One company manufactures a design with a flap that can be adjusted to be straighter or more forward, as the rider prefers. Due to the deep, secure-feeling seat, the design is also used by some people when starting young, unpredictable horses, and is quite popular for trail riding, endurance riding , and casual hacking. Many top-level endurance riders find this design superior to an "endurance" style saddle for distance competition because it allows them to get off
1616-415: A noseband and headstall that buckles around the horse's head and allows the horse to be led or tied. The lead rope is separate, and it may be short (from six to ten feet, two to three meters) for everyday leading and tying, or much longer (up to 25 feet (7.6 m), eight meters) for tasks such as for leading packhorses or for picketing a horse out to graze. Some horses, particularly stallions , may have
1717-444: A position more forgiving on the horse's back that encourages better movement. The traditional English showing saddle is not used by these riders, and instead a more modern dressage-like saddle is used, with a more vertically cut flap. There sometimes is slight padding in these saddles, providing extra support, and the horses themselves are often shown in leaner, more athletic condition. The American-style Saddle Seat position, set behind
1818-546: A rider is thrown from a horse but has a foot caught in the stirrup, they could be dragged if the horse runs away. To minimize this risk, a number of safety precautions are taken. First, most riders wear riding boots with a heel and a smooth sole. Next, some saddles, particularly English saddles , have safety bars that allow a stirrup leather to fall off the saddle if pulled backwards by a falling rider. Other precautions are done with stirrup design itself. Western saddles have wide stirrup treads that make it more difficult for
1919-448: A saddle is the wrong size. Before fitting the saddle, it must be positioned correctly on the horse's back . The points of the saddle tree at the front arch should give a full three-fingers width of clearance behind the shoulder blade when the horse is standing straight, or a hand's width with the foreleg fully extended. This can be done by having someone on the ground pull each of the horse's forelegs as far forward as possible, holding
2020-435: A saddle used for jumping or eventing may have more padding to help give the rider support over fences. Another development is the monoflap saddle, in which both the sweat flap and saddle flap are made of lighter weight leather, stitched together around the edges leaving only a passage point for the girth straps, thus reducing the thickness of leather between the rider and the horse, and giving a closer feel, while still protecting
2121-421: A shorter stirrup length (although not as short as racing stirrups). The flap often has supportive padded knee rolls, especially for show jumping and cross-country, less so for equitation. The balance of the seat is further back and comparatively flat, with the cantle and pommel low so that they do not interfere with the rider's jumping position (and variations known as "two-point position" or "half-seat"). Like
SECTION 20
#17327915690592222-468: A stirrup bar set farther forward and a cutback pommel that falls behind rather than over the withers, though the seat is less flat and the rider's center of balance is closer to that of a dressage saddle. Many show horses are also presented in fatter condition than in more athletic disciplines, so the billets are placed to help keep the saddle properly placed on a rounder animal, with the foremost billet on show pony saddles frequently being attached directly to
2323-494: A team. A single rein or rope may be attached to a halter to lead or guide a horse or packhorse . A long rein called a longe line may be used to hold a horse traveling in a circle around the handler for training and exercise purposes, or for the purpose of a clinical lameness evaluation by a veterinarian. On certain designs of headgear, a third rein may be added to the paired reins, used for leading, longeing, or other specialized or stylistic purposes. The best-known example of
2424-614: A third rein used in the USA is the leading rein of the mecate of the classic bosal hackamore . Types of reins include: In popular culture, to rein in means to hold back, slow down, control or limit. Sometimes the eggcorn , reign in , is used. Usage of the opposing free rein dates back to Geoffrey Chaucer (1343–1400) and means to give or allow complete freedom, in action and decision, over something. The Best Org In The World (Rein Clan) https://m.youtube.com/channel/UCmr2j5VxT1nO4bBiUHyM_6w Horse tack Saddles are seats for
2525-422: A too-forward cut flap that is not properly aligned with the seat, which prevents the rider from getting into a correct position on the flat and sometimes gives the rider the uncomfortable sensation of feeling like they are constantly sliding backwards. Also, when the stirrups are adjusted correctly for jumping, the rider's knees are not always placed properly in relation to the flap. Some models also are too high in
2626-419: A type of English bridle that use two bits in the mouth at once, a snaffle and a curb. The two bits allow the rider to have very precise control of the horse. As a rule, only very advanced horses and riders use double bridles. Double bridles are usually seen in the top levels of dressage , but also are seen in certain types of show hack and Saddle seat competition. A hackamore is a headgear that utilizes
2727-430: A wide leather strap going horizontally across the horses' breast, attached to the traces and then to the load. This is used only for lighter loads. A collar and hames harness has a collar around the horses' neck with wood or metal hames in the collar. The traces attach from the hames to the load. This type of harness is needed for heavy draft work. Both types will also have a bridle and reins . A harness that
2828-474: Is a direct descendant of the English hunting saddle. The show saddle is designed to show off the horse's conformation , most notably the shoulder, and is therefore a minimal saddle with a close fit and straight-cut flap. The seat is very flat, and there are no knee or thigh rolls, so the saddle offers little support to the rider. Like the American Saddle Seat saddle, the English showing saddle has
2929-422: Is a significant design difference between an eventing saddle and an all-purpose saddle. However, while eventing saddles usually do have better balance and higher quality materials and workmanship, a fundamental design difference is otherwise difficult to discern. Many manufacturers create two models, one with a slightly straighter dressage-oriented flap that still allows a rider to jump low fences, and another with
3030-586: Is a skill and riding art worth preserving and thus continue to practice the style, working to achieve greater skill and refinement. Sidesaddles may be used in almost every discipline, including show jumping . In the USA, the four main divisions in modern horse shows are Western, Hunt seat, Saddle seat (the two English divisions use the same basic style of saddle but different bridles and rider appointments), and "historical," which may depict any culture or period, but must be fully researched and correctly utilized. Although sidesaddles are still manufactured today, it
3131-418: Is a small niche market, and a new sidesaddle is quite expensive. Thus most riders who wish to ride sidesaddle are often found hunting for older saddles at antique shops, estate sales, and in dusty barn lofts. It is difficult to find a sidesaddle that not only fits the rider and horse but also is in good condition. The sidesaddle has only one stirrup leather, and two pommels: the fixed pommel (sometimes called
Rein - Misplaced Pages Continue
3232-438: Is added on all sides of the tree to create the seat, flaps and panels. Cowhide is usually used, though pigskin and other leathers are also seen. The panels on the underside of the saddle traditionally are stuffed with wool flock, which is still preferred and used on the highest quality saddles. Synthetic materials, including foam and fiberfill materials, are used on more moderately priced saddles, and one company currently sells
3333-471: Is based on a solid tree , over which webbing, leather and padding materials are added. Traditionally, the tree of an English saddle is built of laminated layers of high quality wood, reinforced with steel underneath the front arch, and around the rear underside of the tree from quarter to quarter. The sides of the tree that run horizontally along the horse's back are known as bars. Many modern trees are made with spring steel running from front to rear between
3434-418: Is called the sweat flap, and the upper flap is called the saddle flap (or, simply and appropriately, the "flap"). The flaps sit between the rider's leg and the horse's side and protects the horse from being pinched by the stirrup leather or girth, and the rider's leg from being chafed by the girth buckles. On some saddles it is also specially padded to protect or support the rider's knee. The differences between
3535-419: Is designed specifically for the mounted game. It has a relatively flat seat and the saddle flaps are long and fairly straight to accommodate the longer leg position, although more forward than the dressage saddle. One of the defining features of the polo saddle is that there is very little or no padding under the leg, allowing the rider to have maximum freedom of movement. If the saddle had thigh or calf blocks,
3636-480: Is further back than in other styles because the seat is also farther back) is protected. Riders use very long stirrups, usually at least as long as those of dressage riders. The saddle seat was developed from two sources. The first was a flatter European saddle developed to sit the rider further back to show off the high front leg action of flashy horses, often seen quite literally during Sunday rides in city parks. ( See English Show Saddle, below. ) The second source
3737-506: Is important that the style of bit is appropriate to the horse's needs and is fitted properly for it to function properly and be as comfortable as possible for the horse. The basic "classic" styles of bits are: While there are literally hundreds of types of bit mouthpieces , bit rings and bit shanks , essentially there are really only two broad categories: direct pressure bits, broadly termed snaffle bits ; and leverage bits, usually termed curbs . Bits that act with direct pressure on
3838-523: Is made of wood, spring steel , or composite, and it supports the rider on a sling of webbing between the firm pommel (front of the saddle) and cantle (back of the saddle). On either side of the tree, a steel hook known as the "stirrup bar" is affixed. It is upon this hook that the rider hangs the stirrup leather , which is a very strong leather or nylon loop supporting the stirrup. More very strong leather or nylon straps known as billets (or girth points/straps - UK) are attached to stout webbing which
3939-619: Is not legal in any competition. In some disciplines, use of leverage devices, even in training, is controversial. English saddle English saddles are used to ride horses in English riding disciplines throughout the world. The discipline is not limited to England , the United Kingdom in general or other English-speaking countries. This style of saddle is used in all of the Olympic and International Federation for Equestrian Sports (FEI) equestrian disciplines, except for
4040-400: Is particularly important to prevent a saddle from shifting. They may also be worn in other horse show classes for decorative purposes. A martingale is a piece of equipment that keeps a horse from raising its head too high. Various styles can be used as a control measure, to prevent the horse from avoiding rider commands by raising its head out of position; or as a safety measure to keep
4141-603: Is still used today, most notably by the Spanish Riding School , and also in Iberia and eastern Europe. In England, foxhunting grew in popularity (as the usual quarry of deer had dwindled following the English Civil War , when they were hunted for food). This required a new type of riding, as horse and rider now had to tackle fences, hedges, ditches, and banks straight on if they wished to keep up with
Rein - Misplaced Pages Continue
4242-414: Is tacked across the top of the tree, to which will eventually buckle the girth --the beltlike strap which holds the saddle onto the horse. The tree and its various parts are upholstered with a covering made of leather, nylon or microfiber and shaped to form the seat above and the panels below. In addition to the seat and panels, English saddles feature leather flaps on either side; the underside flap
4343-411: Is used to support shafts, such as on a cart pulled by a single horse, will also have a saddle attached to the harness to help the horse support the shafts and breeching to brake the forward motion of the vehicle, especially when stopping or moving downhill. Horses guiding vehicles by means of a pole, such as two-horse teams pulling a wagon , a hay-mower, or a dray , will have pole-straps attached to
4444-417: Is usually much deeper in a dressage saddle than a jumping saddle, and allows the rider to sit comfortably and relax to best influence the horse. The stuffing of the panels is often kept to a minimum in a dressage saddle, to allow a closer feel with the horse. It often has a wider bearing surface than a jumping saddle. Some designs feature an exaggerated amount of padding in front of the knee, much more than in
4545-505: The Morgan and the Arabian , are commonly shown in saddle seat style, though these breeds also have hunt seat divisions. The seat of this saddle is longer and flatter than that of a forward seat or dressage saddle. The seat places the rider's center of balance farther back on the horse than in other English riding disciplines, though correct saddle seat equitation still demands that
4646-420: The girth , and so an overgirth is usually added to keep it secure. Saddles used in steeplechases are generally slightly heavier and more substantial, usually being built on a full tree. Exercise saddles are usually larger and heavier, with a more prominent pommel and cantle to provide more security to the rider. Though these features add pounds, weight does not matter as it would in a race. The polo saddle
4747-459: The poll , chin groove and mouth of the horse are in the category of curb bits. Any bit with shanks that works off of leverage is a "curb" bit, regardless of whether the mouthpiece is solid or jointed. Some combination or hybrid bits combine direct pressure and leverage, such as the Kimblewick or Kimberwicke , which adds slight leverage to a two-rein design that resembles a snaffle; and
4848-469: The rider , fastened to the horse's back by means of a girth in English-style riding, or a cinch in the use of Western tack. Girths are generally a wide strap that goes around the horse at a point about four inches behind the forelegs. Some western saddles will also have a second strap known as a flank or back cinch that fastens at the rear of the saddle and goes around the widest part of
4949-482: The All-Purpose saddle, the jumping saddle usually has three short billets. However, other styles (such as monoflap jumping saddles) have longer billets that mirror the dressage saddle, so that the rider no longer has to ride with extra bulk under the leg. It is important that the rider's leg fit appropriately into the flap of the jumping saddle when the stirrups are shortened. If the knee is too far forward or back,
5050-495: The bars. These trees are somewhat flexible and are known as "spring trees," with the degree of flexibility varying from saddle to saddle. More recently, saddle manufacturers are using various materials to replace wood and create a synthetic molded tree (some still using spring steel and a steel gullet plate). Synthetic materials vary widely in quality. Polyurethane trees are often very well-made, but some very cheap saddles are made with fiberglass trees that are not so durable. Leather
5151-415: The bones and cartilage of the horse's head. A longeing cavesson (UK: lungeing ) is a special type of halter or noseband used for longeing a horse. Longeing is the activity of having a horse walk, trot and/or canter in a large circle around the handler at the end of a rope that is 25 to 30 feet (9.1 m) long. It is used for training and exercise. A neck rope or cordeo is a rope tied around
SECTION 50
#17327915690595252-408: The cantle, which can hit a rider in the buttocks and push the seat too far forward when jumping all but the smallest fences. The jumping saddle, sometimes called a "forward seat" or "close contact" saddle, is designed for show jumping , hunt seat equitation , foxhunting , and the show jumping and cross-country phases of eventing . Its most distinctive feature is a forward-cut flap that allows for
5353-502: The cantle. If the flap was not inclined forward, the rider’s knee would hang over the flap, and the flap would constantly push the leg out of position (usually backward), so that the rider would become unstable and interfere with his horse. If the seat was not moved rearward, the rider would be forced ahead of the saddle over a fence. A racing saddle, where jockeys ride with incredibly short stirrups, will have an extremely forward and short saddle flap (almost more horizontal than vertical), and
5454-400: The flatter "close contact" jumping saddle with a forward flap, and deep-seated dressage saddle with a long, straight flap. This style of saddle is most commonly seen in amateur-owner or lower-level junior competition. The less-expensive "all-purpose" models are often marketed as beginner's saddles. More expensive models are usually labeled "eventing" saddles. Manufacturers insist that there
5555-400: The foot to become trapped. A number of saddle styles incorporate a tapedero , which is covering over the front of the stirrup that keeps the foot from sliding all the way through the stirrup. The English stirrup (or "iron") has several design variations which are either shaped to allow the rider's foot to slip out easily or are closed with a very heavy rubber band. The invention of stirrups
5656-408: The four rein designs such as the single mouthpiece Pelham bit and the double bridle , which places a curb and a snaffle bit simultaneously in the horse's mouth. In the wrong hands even the mildest bit can hurt the horse. Conversely, a very severe bit, in the right hands, can transmit subtle commands that cause no pain to the horse. Bit commands should be given with only the quietest movements of
5757-421: The gullet, is one of the most important factors when fitting the saddle, and can be tested easily by looking at the sweat pattern on the animal's back after work. A tree that is too narrow is more of a threat than one too wide, as it pushes the points of the saddle tree into the horse's back. This will often result in a hollowing if it persists for long periods of time. The sweat pattern will have even sweating along
5858-481: The halter. A show halter is made from rolled leather and the lead attaches to form the chinpiece of the noseband. These halters are not suitable for paddock usage or in loose stalls. An underhalter is a lightweight halter or headcollar which is made with only one small buckle, and can be worn under a bridle for tethering a horse without untacking. Bridles usually have a bit attached to reins and are used for riding and driving horses. English Bridles have
5959-538: The hands, and much steering and stopping should be done with the legs and seat. A horse harness is a set of devices and straps that attaches a horse to a cart , carriage , sledge or any other load. There are two main styles of harnesses - breaststrap and collar and hames style. These differ in how the weight of the load is attached. Most Harnesses are made from leather, which is the traditional material for harnesses, though some designs are now made of nylon webbing or synthetic biothane. A breaststrap harness has
6060-416: The horse from tossing its head high or hard enough to smack its rider in the face. They are allowed in many types of competition, especially those where speed or jumping may be required, but are not allowed in most "flat" classes at horse shows , though an exception is made in a few classes limited exclusively to young or "green" horses who may not yet be fully trained. Martingales are usually attached to
6161-409: The horse is known as a "wither tracing." To create this, an artist's flexicurve or a piece of coat hanger wire is placed up over the withers about two inches behind the horse's shoulder blade, then shaped to fit across the withers. The shape is then traced onto heavy paper or cardboard. An average horse can be fitted with just this measurement by comparing the angle of the wither tracing to the angle of
SECTION 60
#17327915690596262-514: The horse one of two ways. They are either attached to the center chest ring of a breastplate or, if no breastplate is worn, they are attached by two straps, one that goes around the horse's neck, and the other that attaches to the girth, with the martingale itself beginning at the point in the center of the chest where the neck and girth straps intersect. Martingale types include the standing martingale, running, German, Market Harborough, and Irish. There are other training devices that fall loosely in
6363-602: The horse's back and move quickly over rough or mountainous terrain, yet provides greater security to the rider. On the other hand, this compromise design also means that an advanced rider may find the saddle limits his or her ability to obtain a correct position at higher levels of competition, either in show jumping or dressage . For this reason, some English riding instructors and coaches do not particularly encourage their riders to use these saddles. Quality and balance are very critical factors to consider when purchasing an all-purpose saddle. Many cheap models are designed with
6464-442: The horse's back. The near-side flap is commonly cut forward to keep the rider's right leg and foot from touching the horse's left shoulder. The girthing of an English sidesaddle is usually a three-buckle system, with a usual full-length girth and an additional balancing girth. The stirrup of a sidesaddle is much shorter than in a conventional saddle, so that the rider's knee is placed close to the leaping horn, and it buckles midway down
6565-483: The horse's belly. It is important that the saddle be comfortable for both the rider and the horse as an improperly fitting saddle may create pressure points on the horse's back muscle ( Latissimus dorsi ) and cause the horse pain and can lead to the horse, rider, or both getting injured. There are many types of saddle, each specially designed for its given task. Saddles are usually divided into two major categories: " English saddles " and " Western saddles " according to
6666-583: The horse's center of balance, somewhat resembles the old-style show position, though the modern rider remains balanced over the stirrups. The sidesaddle was used by women from approximately the 14th through 19th centuries, when a combination of long skirts and social mores discouraged women from riding astride. Today the saddle is still widely used for specialty purposes in shows, parades, and other exhibitions. It has use for practical purposes by some riders who have injuries that make it difficult to ride astride. A smaller number of riders feel that sidesaddle riding
6767-402: The horse's skin from straps. The "all-purpose" or "eventing" saddle (also sometimes called a "general purpose" saddle) was developed to allow riders to use one saddle both over fences and on the flat. This type of saddle has a deep seat with a long, but somewhat forward flap. The flaps usually have padding under the leg, for support while jumping. The design is intended to be a compromise between
6868-433: The horse, and several of these techniques have gone on to influence other saddle types. The panels are stuffed with different types of material, all designed to spread pressure evenly and disperse sweat. Most endurance saddles may have extended panels (called "fans" or "blazers"), which increase bearing area. Others may have "floating" panels, which are particularly useful since endurance riders often ride with their seat out of
6969-422: The hounds and witness the kill. The old saddle was cumbersome while hunting. Its cantle would get in the way of the riders as they tried to lean back over the fence (a practice that was common until Caprilli developed the "forward seat"), and the high pommel created pain as the rider went over jumps. The resulting saddle developed for foxhunting had a very low pommel and cantle with a flat seat, and no padding under
7070-431: The leather rather than close to the tree. The flat racing saddle is designed to not interfere with a running horse and to be as lightweight as possible (including the stirrup irons). The racing saddle has a very long seat without a dip to it, combined with extremely forward flaps that accommodate the very short stirrups and extreme forward seat used by jockeys. It also has a flat pommel and cantle so nothing interferes with
7171-454: The leg at the knee, while another person checks the shoulder blade. The rider's weight should be carried on the muscles that are over the horse's ribs (from behind the shoulder blades to the last rib). The last rib of the horse should be found, and the saddle should not come behind it. Many riders put their saddles too far forward, especially those that use jumping saddles. A properly fitting saddle will "find its own place" when put on over
7272-430: The leg would not be allowed to swing forward or back as needed. There are many factors to consider when fitting a saddle, and a professional saddle maker may be consulted to fit a saddle properly to a horse's back. Incorrectly fitting saddles cause pressure points, which may result in bruising, soreness, and behavior problems under saddle. The saddle must also fit the rider, as security on the horse can be compromised when
7373-441: The leg, therefore providing the rider with little, if any, support. The stirrup bars were protruding, and placed more forward than modern saddles, which made it nearly impossible for the rider to keep his legs underneath his body. However, the usual practice was to ride with longer stirrups, and the feet pushed out in front, so this was not a problem. The English hunting saddle is the predecessor of all English-type riding saddles. As
7474-611: The lower part of the horse collar. Breastplates , breastcollars or breastgirths attach to the front of the saddle, cross the horse's chest, and usually have a strap that runs between the horse's front legs and attaches to the girth. They keep the saddle from sliding back or sideways. They are usually seen in demanding, fast-paced sports. They are crucial pieces of safety equipment for English riding activities requiring jumping, such as eventing , show jumping , polo , and fox hunting . They are also seen in Western riding events, particularly in rodeo , reining and cutting , where it
7575-419: The martingale category, in that they use straps attached to the reins or bit which limit the movement of the horse's head or add leverage to the rider's hands in order to control the horse's head. Common devices of this nature include the overcheck , the chambon , de Gogue , grazing reins, draw reins and the "bitting harness" or " bitting rig ". However, most of this equipment is used for training purposes and
7676-448: The near (left) side of the horse, though occasionally a sidesaddle is found that is reversed and allows the rider to sit with their legs to the off (right) side. In spite of having both legs to the side of the horse, properly positioned riders sit on the horse facing forward, with their spine centered in the saddle perpendicular to that of the horse, with weight balanced equally on both buttocks. The seat must be wide enough to accommodate
7777-408: The newly approved FEI events of equestrian vaulting and reining . Most designs were specifically developed to allow the horse freedom of movement, whether jumping, running, or moving quickly across rugged, broken country with fences. Unlike the western saddle or Australian Stock Saddle , there is no horn or other design elements that stick out above the main tree of the saddle. The English saddle
7878-444: The number of reins connecting to the pairs of horses. A rein may be attached to a halter to lead or guide the horse in a circle for training purposes or to lead a packhorse, but a simple lead rope is more often used for these purposes. A longe line is sometimes called a "longe rein", but it is actually a flat line about 30 feet (9.1 m) long, usually made of nylon or cotton web, about one inch wide, thus longer and wider than even
7979-469: The panels, except for the points of the tree, which will cause round dry spots in the area of sweat, as a result from the pressure. A saddle that is slightly too wide will not be as much of a problem. However, a saddle that is much too wide will not have adequate wither clearance, especially on a high-withered horse, causing pressure in this area. Too much pressure in the short term can lead to rubs and saddle sores , long-term problems may include damage to
8080-402: The piping at the front arch of the saddle. However, horses with an unusual shape are measured in three locations, the second measurement approximately two inches behind the first one, and the last measurement nine inches behind the withers. Often for accurate measurements, a professional saddle fitter may need to be consulted. The tree width, which dictates the width of the saddle and height of
8181-451: The point of the front arch of the tree; this is known as a "forward point". The traditional position of the old style show rider was to ride with the feet placed forward, and the seat pushed back, which was once thought to encourage more action and to make the horse look as if it has a longer front end. Modern competitors are starting a trend to a more classical position, with the leg placed underneath their body and their hips over their heel,
8282-414: The reins over the animal's back. When pairs of equines are used in drawing a wagon or coach it is usual for the outer side of each pair to be connected to the reins and for the inside of the bits to be connected between the pair of horses by a short bridging strap or rope. The driver carries "four-in-hand" or "six-in-hand", being the number of reins held connecting to the same number of horses harnessed as
8383-482: The reins pulls the bit, which then pulls the horse's head from side to side, which is how the horse is controlled. On some types of harnesses there might be supporting rings to carry the reins over the horse's back. When pairs of horses are used in drawing a wagon or coach it is usual for the outer side of each pair to be connected to reins and the inside of the bits connected by a short bridging strap or rope. The driver carries "four-in-hand" or "six-in-hand" being
8484-458: The rider in a position that allows a horse the freedom of movement needed to achieve maximum speed, but at the cost of giving the rider less leverage to control the horse, and less protection for the horse's back from a sitting rider. Therefore, racing saddles are not suited for general equestrian riding. Most flat racing saddles weigh less than 1½ pounds; the lightest saddles weigh as little as 8 ounces. They generally have only one billet to attach
8585-473: The rider's balance will be incorrect and the saddle becomes a hindrance rather than an advantage while jumping obstacles. Dressage saddles have a very straight-cut flap, much longer than a jumping saddle, which accommodates the longer leg position of a dressage rider, who works only on the flat and does not need to jump fences. The pommel is a bit higher and the deepest point of the saddle's seat more forward, all to allow for this longer leg position. The seat
8686-404: The rider's legs and feet be balanced under the horse. The pommel is always cut back to allow greater freedom of the front legs and shoulder, as well as to accommodate the higher set neck and higher withers typical of the saddle seat breeds. The flap is wide front-to-back, with no blocks or rolls beneath, and ends closer to the cantle than any other English saddle so that the rider's leg (whose thigh
8787-418: The rider's offside thigh as well as buttocks. A sidesaddle is comparatively flat from front to rear. Many have a small curved pommel and a long, raised cantle on the off side to support the offside thigh and to help riders keep their spine squared on the horse's back. On some designs, the seat of the sidesaddle is angled away from the side on which the legs lie to help the weight of the rider remain centered over
8888-530: The rider, the seat is often quilted or padded, and the stirrups are designed with a wide foot tread to reduce fatigue. For the horse, the panels of the saddle are extended to provide a larger area of contact with the back, thus reducing fatigue linked to the pounds per square inch of saddle contact. The saddle has many dee rings along the pommel and cantle that allow the rider to attach various items. Modern endurance saddle manufacturers have been innovative in methods to lighten weight and provide additional comfort for
8989-476: The rider. Flat-racing saddles are built on a half-tree to reduce weight; because the rider spends most of the time up over the horse's withers , there is no need for the protection to the horse's spine that a full tree provides. The stirrups, instead of being looped over stirrup bars, are generally looped directly over the wooden bars of the half tree to prevent the loss of a stirrup during a race and to reduce bulk. This saddle provides very little security, placing
9090-433: The riding discipline they are used in. Other types of saddles, such as racing saddles, Australian saddles , sidesaddles and endurance saddles do not necessarily fit neatly in either category. Stirrups are supports for the rider's feet that hang down on either side of the saddle. They provide greater stability for the rider but can have safety concerns due to the potential for a rider's feet to get stuck in them. If
9191-407: The saddle (releasing pressure from the back, but increasing the amount felt on the stirrup bars where they attach near the point of the tree). There is also an endurance saddle design based on the western saddle that is a bit larger and heavier, but is designed with similar goals. This saddle is used in the United Kingdom , Australia , and elsewhere, for showing on the flat or over low fences, and
9292-534: The saddle was also made narrower. Additionally, padding was placed under the knee rolls, for extra security. The term English saddle encompasses several types, including those used for show jumping and hunt seat , dressage , Saddle seat , horse racing and polo . To non-horsemen, the major distinguishing feature of an English saddle is its lack of a horn. However, some Western saddles , such as those used to ride rough stock in rodeos and certain types of western-influenced saddles used in endurance riding , lack
9393-407: The seat will be extended well back from the pommel to keep the rider’s center of gravity correctly situated. Supportive padding in the seat, size and shape of knee rolls and the use of additional blocks behind the leg is also considered when developing a saddle. While a polo saddle is constructed with a minimum of padding so as to allow the polo player great freedom to twist and reach for his shot,
9494-494: The sports of show jumping and eventing became more popular, saddle shape changed. Caprilli , Santini, and Toptani developed the "forward seat," in which the rider uses shorter stirrups and keeps his legs under him as he rode in two-point , with his seat bones hovering above the saddle. The shorter stirrup required a more forward flap, to match the greater knee angle of the rider. The protruding stirrup bars were uncomfortable in this new position, so they were recessed. The waist of
9595-422: The stadium phase of eventing . While the classic bosal -style hackamore is usually used to start young horses, other designs, such as various bitless bridles and the mechanical hackamore are often seen on mature horses with dental issues that make bit use painful, horses with certain training problems, and on horses with mouth or tongue injuries. Some riders also like to use them in the winter to avoid putting
9696-432: The styles of English saddle are small but significant. The most important distinctions are the location and therefore the balance of the seat, and the flap length and shape. A saddle used for a discipline where the rider sits more upright with a longer leg, such as in dressage , has a flap that is longer to accommodate the leg, and less inclined forward (as the knee does not need to go forward). The seat will also be closer to
9797-427: The tongue and lips of the bit are in the general category of snaffle bits. Snaffle bits commonly have a single jointed mouthpiece and act with a nutcracker effect on the bars, tongue and occasionally roof of the mouth. However, regardless of mouthpiece , any bit that operates only on direct pressure is a "snaffle" bit. Leverage bits have shanks coming off the mouthpiece to create leverage that applies pressure to
9898-408: The withers, and then slid back until it will not easily slide further. Even a well-fitting saddle will cause discomfort to the horse and position problems for the rider if it is placed too far forward, creating problems that include: Saddles that are placed too far back (a common error made by inexperienced riders first learning to saddle a horse), or saddles with a tree that is too long (for example,
9999-424: The withers, to keep the rider's center of gravity in the correct spot. However, in disciplines where the rider needs shorter stirrups for better balance and security, such as in the jumping disciplines, the saddle flap is moved proportionately forward and shortened, and the seat is moved further back. A jumping saddle will have a shorter and more forward flap than a dressage saddle, with the seat slightly more towards
10100-426: Was of great historic significance in mounted combat , giving the rider secure foot support while on horseback. Bridles , hackamores , halters , or headcollars , and similar equipment consist of various arrangements of straps around the horse's head, and are used for control and communication with the animal. A halter (United States) or headcollar (United Kingdom) (occasionally headstall ) consists of
10201-481: Was the plantation saddle developed in the southern United States that allowed riders to sit back comfortably on a gaited horse as they covered large areas of land on a daily basis. The Endurance saddle, originally based on a military or police saddle, is used for the long-distance competition of endurance riding . Its major task is to provide the horse and rider with the comfort and balance needed to cover long distances over rough terrain, sometimes for multiple days. For
#58941