Misplaced Pages

#98901

37-453: 201(BHEL) The Indian locomotive class WAG-7 is a class of 25 kV AC electric locomotives that was developed in 1990 by Chittaranjan Locomotive Works for Indian Railways . The model name stands for broad gauge (W) , alternating current (A), goods traffic (G) engine, 7th generation (7). They entered service in 1992. A total of 1974 WAG-7 were built at CLW and BHEL between 1990 and 2015 by CLW and 2009 and 2023 by BHEL which made them

74-427: A battery is determined by the chemistry of that cell (see Galvanic cell § Cell voltage ). Cells can be combined in series for multiples of that voltage, or additional circuitry added to adjust the voltage to a different level. Mechanical generators can usually be constructed to any voltage in a range of feasibility. Nominal voltages of familiar sources: In 1800, as the result of a professional disagreement over

111-615: A different nationality. elected by the General Conference on Weights and Measures (CGPM) whose principal task is to promote worldwide uniformity in units of measurement by taking direct action or by submitting proposals to the CGPM. The CIPM meets every year (since 2011 in two sessions per year) at the Pavillon de Breteuil where, among other matters, it discusses reports presented to it by its Consultative Committees. Reports of

148-514: A member of the CIPM. Apart from the CCU, membership of a CC is open to National Metrology Institutes ( NMIs ) of Member States that are recognized internationally as most expert in the field. NMIs from Member States that are active in the field, but lack the expertise to become Members, are able to attend CC meetings as observers. These committees are: The CCU's role is to advise on matters related to

185-441: A ratio because the cgs unit of voltage is inconveniently small and one volt in this definition is approximately the emf of a Daniell cell , the standard source of voltage in the telegraph systems of the day. At that time, the volt was defined as the potential difference [i.e., what is nowadays called the "voltage (difference)"] across a conductor when a current of one ampere dissipates one watt of power. The "international volt"

222-533: A series-connected array of several thousand or tens of thousands of junctions , excited by microwave signals between 10 and 80 GHz (depending on the array design). Empirically, several experiments have shown that the method is independent of device design, material, measurement setup, etc., and no correction terms are required in a practical implementation. In the water-flow analogy , sometimes used to explain electric circuits by comparing them with water-filled pipes, voltage (difference in electric potential)

259-414: Is also equivalent to electronvolts per elementary charge : The volt is named after Alessandro Volta . As with every SI unit named for a person, its symbol starts with an upper case letter (V), but when written in full, it follows the rules for capitalisation of a common noun ; i.e., volt becomes capitalised at the beginning of a sentence and in titles but is otherwise in lower case. Historically

296-709: Is defined as the electric potential between two points of a conducting wire when an electric current of one ampere dissipates one watt of power between those points. It can be expressed in terms of SI base units ( m , kg , s , and A ) as Equivalently, it is the potential difference between two points that will impart one joule of energy per coulomb of charge that passes through it. It can be expressed in terms of SI base units ( m , kg , s , and A ) as It can also be expressed as amperes times ohms (current times resistance, Ohm's law ), webers per second (magnetic flux per time), watts per ampere (power per current), or joules per coulomb (energy per charge), which

333-606: Is likened to difference in water pressure , while current is proportional to the amount of water flowing. A resistor would be a reduced diameter somewhere in the piping or something akin to a radiator offering resistance to flow. The relationship between voltage and current is defined (in ohmic devices like resistors ) by Ohm's law . Ohm's Law is analogous to the Hagen–Poiseuille equation , as both are linear models relating flux and potential in their respective systems. The voltage produced by each electrochemical cell in

370-578: Is the elementary charge and h is the Planck constant ), a "conventional" value K J-90 = 0.4835979 GHz/μV was used for the purpose of defining the volt. As a consequence of the 2019 revision of the SI , as of 2019 the Josephson constant has an exact value of K J = 483 597 .848 416 98 ... GHz/V , which replaced the conventional value K J-90 . This standard is typically realized using

407-590: The Convention du Mètre ( Metre Convention ) was signed by 17 states. This treaty established an international organisation, the Bureau international des poids et mesures (BIPM), which has two governing organs: The organization has a permanent laboratory and secretariat function (sometimes referred to as the Headquarters), the activities of which include the establishment of the basic standards and scales of

SECTION 10

#1732790632099

444-605: The French : Conférence générale des poids et mesures ) is the supreme authority of the International Bureau of Weights and Measures (BIPM), the intergovernmental organization established in 1875 under the terms of the Metre Convention through which member states act together on matters related to measurement science and measurement standards . The CGPM is made up of delegates of the governments of

481-513: The International system of units . The brochure is produced by the CCU in conjunction with a number of other international organisations. Initially the brochure was only in French – the official language of the metre convention, but recent versions have been published simultaneously in both English and French, with the French text being the official text. The 6th edition was published in 1991,

518-579: The metric system . In 1960 the 11th CGPM approved the title International System of Units , usually known as "SI". The General Conference receives the report of the CIPM on work accomplished; it discusses and examines the arrangements required to ensure the propagation and improvement of the International System of Units (SI); it endorses the results of new fundamental metrological determinations and various scientific resolutions of international scope; and it decides all major issues concerning

555-496: The " conventional " volt, V 90 , defined in 1987 by the 18th General Conference on Weights and Measures and in use from 1990 to 2019, was implemented using the Josephson effect for exact frequency-to-voltage conversion, combined with the caesium frequency standard . Though the Josephson effect is still used to realize a volt, the constant used has changed slightly. For the Josephson constant , K J = 2 e / h (where e

592-467: The 1960s. But due to issues from WAG-8, WAG-7 was selected for mass production. However, even before the WAG-7 another type of electric locomotive was imported from ASEA in 1988. This locomotive was classified as WAG-6A . However WAG-6As were not selected for mass production because emergence of 3 Phase AC locomotives . • Key : M -> WAG-7M (Formerly known as WCAM-3 ) Volt One volt

629-1115: The 21st meeting of the CGPM in October 1999, the category of "associate" was created for states not yet BIPM members and for economic unions . Albania (2007) Azerbaijan (2015) Bangladesh (2010) Bolivia (2008) Bosnia and Herzegovina (2011) Botswana (2012) Cambodia (2021) Caribbean Community (2005) Chinese Taipei (2002) Ethiopia (2018) Georgia (2008) Ghana (2009) Hong Kong (2000) Jamaica (2003) Kuwait (2018) Latvia (2001) Luxembourg (2014) Malta (2001) Mauritius (2010) Moldova (2007) Mongolia (2013) Namibia (2012) North Macedonia (2006) Oman (2012) Panama (2003) Paraguay (2009) Peru (2009) Philippines (2002) Qatar (2016) Sri Lanka (2007) Syria (2012) Tanzania (2018) Uzbekistan (2018) Vietnam (2003) Zambia (2010) Zimbabwe (2010–2020, 2022) Cuba (2000–2021) Seychelles (2010–2021) Sudan (2014–2021) The International Committee for Weights and Measures consists of eighteen persons, each of

666-722: The British Association for the Advancement of Science had defined the volt, ohm, and farad. In 1881, the International Electrical Congress, now the International Electrotechnical Commission (IEC), approved the volt as the unit for electromotive force. They made the volt equal to 10 cgs units of voltage, the cgs system at the time being the customary system of units in science. They chose such

703-1872: The British Government signed the convention on behalf of the United Kingdom. This number grew to 21 in 1900, 32 in 1950, and 49 in 2001. As of 18 November 2022 , there are 64 Member States and 36 Associate States and Economies of the General Conference (with year of partnership in parentheses): Argentina (1877) Australia (1947) Austria (1875) Belarus (2020) Belgium (1875) Brazil (1921) Bulgaria (1911) Canada (1907) Chile (1908) China (1977) Colombia (2012) Costa Rica (2022) Croatia (2008) Czech Republic (1922) Denmark (1875) Ecuador (2019) Egypt (1962) Estonia (2021) Finland (1913) France (1875) Germany (1875) Greece (2001) Hungary (1925) India (1880) Indonesia (1960) Iran (1975) Iraq (2013) Ireland (1925) Israel (1985) Italy (1875) Japan (1885) Kazakhstan (2008) Kenya (2010) Lithuania (2015) Malaysia (2001) Mexico (1890) Montenegro (2018) Morocco (2019) Netherlands (1929) New Zealand (1991) Norway (1875) Pakistan (1973) Poland (1925) Portugal (1876) Romania (1884) Russia (1875) Saudi Arabia (2011) Serbia (2001) Singapore (1994) Slovakia (1922) Slovenia (2016) South Africa (1964) South Korea (1959) Spain (1875) Sweden (1875) Switzerland (1875) Thailand (1912) Tunisia (2012) Turkey (1875) Ukraine (2018) United Arab Emirates (2015) United Kingdom (1884) United States (1878) Uruguay (1908) Cameroon (1970–2012) Dominican Republic (1954–2015) North Korea (1982–2012) Peru (1875–1956) Venezuela (1879–1907, 1960–2018) At

740-514: The CIPM include: From time to time the CIPM has been charged by the CGPM to undertake major investigations related to activities affecting the CGPM or the BIPM. Reports produced include: The Blevin Report , published in 1998, examined the state of worldwide metrology. The report originated from a resolution passed at the 20th CGPM (October 1995) which committed the CIPM to study and report on

777-616: The Conference of the Metre in 1875, representatives of seventeen signed the convention on 20 May 1875. In April 1884, H. J. Chaney, Warden of Standards in London unofficially contacted the BIPM inquiring whether the BIPM would calibrate some metre standards that had been manufactured in the United Kingdom. Broch , director of the BIPM replied that he was not authorised to perform any such calibrations for non-member states. On 17 September 1884,

SECTION 20

#1732790632099

814-459: The Indian railways invited tenders to build locomotives to the new specification. The following responses were received: Each company submitted their prototypes and Indian Railways designated these prototypes as the WAG-7 class and WAG-8 class respectively. Technologically thyristor controlled BHEL WAG-8 was meant to be superior to the WAG-7 which was effectively using tap-changer technology from

851-402: The International System of Units (SI), approves the budget for the BIPM (over €13 million in 2018) and it decides all major issues concerning the organization and development of the BIPM. The structure is analogous to that of a stock corporation . The BIPM is the organisation, the CGPM is the general meeting of the shareholders, the CIPM is the board of directors appointed by the CGPM, and

888-475: The convention organisations and national governments is handled by the member state's ambassador to France, it is implicit that member states must have diplomatic relations with France, though during both world wars, nations that were at war with France retained their membership of the CGPM. CGPM meetings are chaired by the Président de l'Académie des Sciences de Paris . Of the twenty countries that attended

925-416: The development of the SI and the preparation of the SI brochure. It has liaison with other international bodies such as International Organization for Standardization (ISO) , International Astronomical Union (IAU) , International Union of Pure and Applied Chemistry (IUPAC) , International Union of Pure and Applied Physics (IUPAP) and International Commission on Illumination (CIE) . Official reports of

962-534: The early 1990s with the aim of addressing the shortcomings of the previous WAG-5 class and remove steam locomotives from IR by a target date of 1990. The WAG-5 though were great successes, had become underpowered to meet the growing demands of the Indian Railways. So in early 1990s IR decided to look for a successor the WAG-5 class. The required specification was of a 5000 horsepower locomotive. Initially,

999-415: The galvanic response advocated by Luigi Galvani , Alessandro Volta developed the so-called voltaic pile , a forerunner of the battery , which produced a steady electric current . Volta had determined that the most effective pair of dissimilar metals to produce electricity was zinc and silver . In 1861, Latimer Clark and Sir Charles Bright coined the name "volt" for the unit of resistance. By 1873,

1036-637: The long-term national and international needs relating to metrology, the appropriate international collaborations and the unique role of the BIPM to meet these needs, and the financial and other commitments that will be required from the Member States in the coming decades. The report identified, amongst other things, a need for closer cooperation between the BIPM and other organisations such as International Organization of Legal Metrology (OIML) and International Laboratory Accreditation Cooperation (ILAC) with clearly defined boundaries and interfaces between

1073-614: The meetings of the CGPM, the CIPM, and all the Consultative Committees, are published by the BIPM. The secretariat is based in Saint-Cloud , Hauts-de-Seine , France . In 1999, the CIPM has established the CIPM Arrangement de reconnaissance mutuelle (Mutual Recognition Arrangement, MRA), which serves as the framework for the mutual acceptance of national measurement standards and for recognition of

1110-726: The member states and observers from the Associates of the CGPM. It elects the International Committee for Weights and Measures (abbreviated CIPM from the Comité international des poids et mesures ) as the supervisory board of the BIPM to direct and supervise it. Initially the work of the BIPM concerned the kilogram and the metre , but in 1921 the scope of the Metre Convention was extended to accommodate all physical measurements and hence all aspects of

1147-484: The most numerous class of mainline electric locomotive till its successor the WAG-9. The WAG-7 is one of the most successful locomotives of Indian Railways, serving freight trains since its introduction in 1990. Even though with the advent of new 3-phase locomotives like WAG-9 and WAG-12 , all WAG-7 locomotives except ones destroyed in accidents, are in service and doing all types of duties. The history of WAG-7 begins in

Indian locomotive class WAG-7 - Misplaced Pages Continue

1184-415: The organisations. Another major finding was the need for cooperation between accreditation laboratories and the need to involve developing countries in the world of metrology. The Kaarls Report published in 2003 examined the role of the BIPM in the evolving needs for metrology in trade, industry and society. The CIPM has responsibility for commissioning the SI brochure, which is the formal definition of

1221-531: The organization and development of the BIPM, including its financial endowment. The CGPM meets in Paris, usually once every four years. The 25th meeting of the CGPM took place from 18 to 20 November 2014, the 26th meeting of the CGPM took place in Versailles from 13 to 16 November 2018, and the 27th meeting of the CGPM took place from 15 to 18 November 2022. On 20 May 1875 an international treaty known as

1258-399: The principal physical quantities and maintenance of the international prototype standards. The CGPM acts on behalf of the governments of its members. In so doing, it elects members to the CIPM, receives reports from the CIPM which it passes on to the governments and national laboratories on member states, examines and where appropriate approves proposals from the CIPM in respect of changes to

1295-521: The staff at the site in Saint-Cloud perform the day-to-day work. The CGPM recognises two classes of membership – full membership for those states that wish to participate in the activities of the BIPM and associate membership for those countries or economies that only wish to participate in the CIPM MRA program. Associate members have observer status at the CGPM. Since all formal liaison between

1332-452: The validity of calibration and measurement certificates issued by national metrology institutes. A recent focus area of the CIPM has been the revision of the SI . The CIPM has set up a number of consultative committees (CC) to assist it in its work. These committees are under the authority of the CIPM. The president of each committee, who is expected to take the chair at CC meetings, is usually

1369-510: Was defined in 1893 as 1 ⁄ 1.434 of the emf of a Clark cell . This definition was abandoned in 1908 in favor of a definition based on the international ohm and international ampere until the entire set of "reproducible units" was abandoned in 1948. A 2019 revision of the SI , including defining the value of the elementary charge , took effect on 20 May 2019. General Conference on Weights and Measures The General Conference on Weights and Measures (abbreviated CGPM from

#98901