67-663: Witton Park Colliery was a coal mine located in Witton Park, near Witton-le-Wear and Bishop Auckland in County Durham , Northern England . Part of the Durham Coalfield , coal deposits in the Witton Park area were known to be close to the surface, enabling coal to be extracted through shallow mining methods. Starting in 1756, exploratory boreholes were drilled on the Witton Castle estate, owned by
134-683: A coal preparation plant . Technical and economic feasibility are evaluated based on the following: regional geological conditions; overburden characteristics; coal seam continuity, thickness, structure, quality, and depth; strength of materials above and below the seam for roof and floor conditions; topography, especially altitude and slope; climate; land ownership as it affects the availability of land for mining and access; surface drainage patterns; groundwater conditions; availability of labor and materials; coal purchaser requirements in terms of tonnage, quality, and destination; and capital investment requirements. Surface mining and deep underground mining are
201-705: A 70% increase over the 20 years since 1999. In 2018, the world production of brown coal (lignite) was 803.2 Mt, with Germany the world's largest producer at 166.3 Mt. China is most likely the second largest producer and consumer of lignite globally although specific lignite production data is not made available. Coal production has grown fastest in Asia, while Europe has declined. Since 2011, world coal production has been stable, with decreases in Europe and US offset by increases from China, Indonesia and Australia. The top coal mining nations are: Energy production from coal mining
268-440: A coal mine and its structures are a colliery , a coal mine is called a "pit", and above-ground mining structures are referred to as a " pit head ". In Australia , "colliery" generally refers to an underground coal mine. Coal mining has had many developments in recent years, from the early days of men tunneling, digging, and manually extracting the coal on carts to large open-cut and longwall mines. Mining at this scale requires
335-467: A coal seam occurring near the top of a ridge or hill, the entire top is removed in a series of parallel cuts. Overburden is deposited in nearby valleys and hollows. This method usually leaves the ridge and hilltops as flattened plateaus. The process is highly controversial for the drastic changes in topography, the practice of creating head-of-hollow-fills , or filling in valleys with mining debris, and for covering streams and disrupting ecosystems. Spoil
402-403: A greater proportion of the coal deposit than underground methods, as more of the coal seams in the strata may be exploited. This equipment can include the following: Draglines which operate by removing the overburden, power shovels, large trucks in which transport overburden and coal, bucket wheel excavators, and conveyors. In this mining method, explosives are first used in order to break through
469-481: A higher amount of energy per unit mass, specific energy or massic energy, and can often be obtained in areas where wood is not readily available. Though it was used historically as a domestic fuel, coal is now used mostly in industry, especially in smelting and alloy production, as well as electricity generation . Large-scale coal mining developed during the Industrial Revolution , and coal provided
536-440: A land use condition is not equal to the original use. Existing land uses (such as livestock grazing, crop and timber production) are temporarily eliminated in mining areas. High-value, intensive-land-use areas like urban and transportation systems are not usually affected by mining operations. If mineral values are sufficient, these improvements may be removed to an adjacent area. Strip mining eliminates existing vegetation, destroys
603-463: A landfill site until 1989. Coal mine Coal mining is the process of extracting coal from the ground or from a mine. Coal is valued for its energy content and since the 1880s has been widely used to generate electricity. Steel and cement industries use coal as a fuel for extraction of iron from iron ore and for cement production. In the United Kingdom and South Africa ,
670-440: A large dining-room table, but with hydraulic jacks for legs. After the large pillars of coal have been mined away, the mobile roof support's legs shorten and it is withdrawn to a safe area. The mine roof typically collapses once the mobile roof supports leave an area. There are six principal methods of underground mining: Coal is mined commercially in over 50 countries. 7,921 million metric tons (Mt) of coal were produced in 2019,
737-447: A method that currently accounts for about 60 percent of world coal production. In deep mining, the room and pillar or bord and pillar method progresses along the seam, while pillars and timber are left standing to support the mine roof. Once room and pillar mines have been developed to a stopping point limited by geology, ventilation, or economics, a supplementary version of room and pillar mining, termed second mining or retreat mining ,
SECTION 10
#1732793173538804-471: A new coal mine. Shildon railway station Shildon is a railway station serving the town of Shildon in County Durham , England on the Tees Valley Line , between Bishop Auckland and Saltburn via Darlington . The station, situated 9 miles 8 chains (14.6 km) north-west of Darlington, It is owned by Network Rail and managed by Northern Trains . The original station
871-589: A result of occupational exposures is coined occupational hearing loss . To protect miners' hearing, the US Mine Safety and Health Administration 's (MSHA) guidelines for noise place a Permissible Exposure Limit (PEL) for noise at 90 dBA time-weighted over 8 hours. A lower cutoff, 85 dBA, is set for a worker to fall into the MSHA Action Level which dictates that workers be placed into hearing conservation programs. Noise exposures vary depending on
938-485: A surface (also called an open cast) mine. Additionally, coal seam thickness and geology are factors in the selection of a mining method. The most economical method of coal extraction for surface mines is the electric shovel or drag line. The most economical form of underground mining is the long wall, which involves using two spinning drums with carbide bits that runs along sections of the coal seam. Many coals extracted from both surface and underground mines require washing in
1005-575: Is accomplished by drilling holes into the overburden, filling the holes with explosives, and detonating the explosive. The overburden is then removed, using large earth-moving equipment, such as draglines , shovel and trucks, excavator and trucks, or bucket-wheels and conveyors. This overburden is put into the previously mined (and now empty) strip. When all the overburden is removed, the underlying coal seam will be exposed (a 'block' of coal). This block of coal may be drilled and blasted (if hard) or otherwise loaded onto trucks or conveyors for transport to
1072-427: Is commonly started. Miners remove the coal in the pillars, thereby recovering as much coal from the coal seam as possible. A work area involved in pillar extraction is called a pillar section. Modern pillar sections use remote-controlled equipment, including large hydraulic mobile roof-supports, which can prevent cave-ins until the miners and their equipment have left a work area. The mobile roof supports are similar to
1139-418: Is dedicated to mining activities until it can be reshaped and reclaimed. If mining is allowed, resident human populations must be resettled off the mine site; economic activities, such as agriculture or hunting and gathering food and medicinal plants are interrupted. What becomes of the land surface after mining is determined by the manner in which the mining is conducted. Usually reclamation of disturbed lands to
1206-516: Is highly concentrated in certain jurisdictions, which also concentrates much of the social and economic impacts of the industry to these regions. The industry directly employs over seven million workers worldwide, which, in turn, creates millions of indirect jobs. In several parts of the world, producers have reached peak coal as some economies shift away from fossil fuels to address climate change. A 2020 study found that renewables jobs could feasibly be created in these geographies to replace many of
1273-484: Is mostly used to generate electricity, and 75% of annual coal production is exported, mostly to eastern Asia. In 2007, 428 million tonnes of coal was mined in Australia. In 2007, coal provided about 85% of Australia's electricity production. In the fiscal year 2008/09, 487 million tonnes of coal was mined, and 261 million tonnes was exported. In the fiscal year 2013/14, 430.9 million tonnes of coal
1340-417: Is partially economically recoverable. Coal refuse is distinct from the byproducts of burning coal, such as fly ash . Piles of coal refuse can have significant negative environmental consequences, including the leaching of iron, manganese, and aluminum residues into waterways and acid mine drainage . The runoff can create both surface and groundwater contamination. The piles also create a fire hazard, with
1407-593: Is placed at the head of a narrow, steep-sided valley or hollow. In preparation for filling this area, vegetation and soil are removed and a rock drain constructed down the middle of the area to be filled, where a natural drainage course previously existed. When the fill is completed, this underdrain will form a continuous water runoff system from the upper end of the valley to the lower end of the fill. Typical head-of-hollow fills are graded and terraced to create permanently stable slopes. Most coal seams are too deep underground for opencast mining and require underground mining,
SECTION 20
#17327931735381474-436: Is referred to as 'overburden' and is removed in long strips. The overburden from the first strip is deposited in an area outside the planned mining area and referred to as out-of-pit dumping. Overburden from subsequent strips is deposited in the void left from mining the coal and overburden from the previous strip. This is referred to as in-pit dumping. It is often necessary to fragment the overburden by use of explosives. This
1541-515: Is removed and overburden dumped to the side. Dust, vibration, and diesel exhaust odors are created (affecting sight, sound, and smell). Residents of local communities often find such impacts disturbing or unpleasant. In case of mountaintop removal , tops are removed from mountains or hills to expose thick coal seams underneath. The soil and rock removed is deposited in nearby valleys, hollows and depressions, resulting in blocked (and contaminated) waterways. Removal of soil and rock overburden covering
1608-712: Is still common, with 4,000 new cases of black lung every year in the US (4 percent of workers annually) and 10,000 new cases every year in China (0.2 percent of workers). The use of water sprays in mining equipment reduces the risk to miners' lungs. Build-ups of a hazardous gas are known as damps, possibly from the German word Dampf which means steam or vapor: Noise is also a contributing factor to potential adverse effects on coal miners' health. Exposure to excessive noise can lead to noise-induced hearing loss . Hearing loss developed as
1675-579: Is unstaffed and all tickets must be purchased from the ticket vending machine on the platform prior to travel. Step-free access is available to both platforms via ramps, which were added in 2003 when the station was rebuilt in conjunction with the construction of the Shildon Locomotion Museum , sited alongside it on land formerly occupied by the sidings of the Shildon railway works . The grade II listed manual signal box here controls
1742-435: Is used for both thermal and metallurgical coals . In New South Wales open casting for steam coal and anthracite is practiced. Surface mining accounts for around 80 percent of production in Australia, while in the US it is used for about 67 percent of production. Globally, about 40 percent of coal production involves surface mining. Strip mining exposes coal by removing earth above each coal seam. This earth to be removed
1809-839: The Witton Park Ironworks in 1845, marking the establishment of the first ironworks in the Northeast of England. Due to the development of similar ironworks in Shropshire , many of the early workers were of Irish and Welsh descent. With limestone and coal sourced from Witton Park, ironstone was initially obtained from established supplies in the West Midlands . The No.1 Blast Furnace was ignited on St. Valentine's Day in 1846. The company began constructing No.5 Blast Furnace on 24 May 1870, which became operational on 17 April 1871. The similarly sized No.6 Blast Furnace
1876-503: The global energy economy . The major coal producing countries, though, such as China , Indonesia, India and Australia , have not reached peak production, with production increases replacing falls in Europe and the United States and proposed mines under development. The coal mining industry employs almost 2.7 million workers. The History of coal mining goes back thousands of years, with early mines documented in ancient China,
1943-400: The 1860s onward. By the late 20th century, coal was, for the most part, replaced in domestic as well as industrial and transportation usage by oil , natural gas or electricity produced from oil, gas, nuclear power or renewable energy sources. By 2010, coal produced over a fourth of the world's energy. Coal extraction methods vary depending on whether the mine is an underground mine or
2010-579: The Roman Empire and other early historical economies. It became important in the Industrial Revolution of the 19th and 20th centuries, when it was primarily used to power steam engines, heat buildings and generate electricity. Coal mining continues as an important economic activity today, but has begun to decline due to the strong contribution coal plays in global warming and environmental issues, which result in decreasing demand and in some geographies, peak coal . Compared to wood fuels , coal yields
2077-585: The Stobart family, to locate commercially viable coal seams. However, early exploration efforts did not reveal any significant coal deposits. In 1816, William Chaytor of Croft Hall , Yorkshire , purchased the Witton Castle estate for £78,000. He expanded the number of trial boreholes, but it wasn't until the development of the Jane Pit in 1819 that commercial coal extraction began. This success led to
Witton Park Colliery - Misplaced Pages Continue
2144-812: The U.S., Examples include the Sago Mine disaster of 2006, and the 2007 mine accident in Utah 's Crandall Canyon Mine , where nine miners were killed and six entombed. In the decade 2005–2014, US coal mining fatalities averaged 28 per year. The most fatalities during the 2005–2014 decade were 48 in 2010, the year of the Upper Big Branch Mine disaster in West Virginia, which killed 29 miners. Chronic lung diseases, such as pneumoconiosis (black lung) were once common in miners, leading to reduced life expectancy . In some mining countries black lung
2211-624: The US Department of Labor's Mine Safety and Health Administration (MSHA) show that between 1990 and 2004, the industry cut the rate of injuries by more than half and fatalities by two-thirds. But according to the Bureau of Labor Statistics , even in 2006, mining remained the second most dangerous occupation in America, when measured by fatality rate . These numbers, however, include all mining activities, and oil and gas mining contribute to
2278-555: The Witton Park Iron Works, the coal mines in the area lost their primary local market and became entirely dependent on the North Eastern Railway for the distribution of their coal. After nearly 100 years of operation, the accessible coal reserves were in steep decline. The onset of World War I and the loss of a significant number of skilled miners led to the closure of George Pit in 1917, followed by
2345-618: The closure of Jane Pit in April 1925, resulting in the loss of 255 jobs. As a result, many residents left the village to find work in other coal mining and steel-making districts. During the 1930s, some moved to help construct the new British Army base at Catterick , or later to work at the Royal Ordnance Factory in Aycliffe . After securing suitable lease rights, the partnership of Bolckow and Vaughan began constructing
2412-581: The coal mining jobs as part of a just transition ; however, renewable energy was not suitable in some of the geographies with high concentrations of miners, such as in China, which is far and away the leading coal-mining nation. Coal refuse (also described as coal waste, rock, slag, coal tailings, waste material, rock bank, culm, boney, or gob ) is the material left over from coal mining, usually as tailings piles or spoil tips . For every tonne of hard coal generated by mining, 400 kg (880 lb) of waste material remains, which includes some lost coal that
2479-497: The coal preparation (or wash) plant. Once this strip is empty of coal, the process is repeated with a new strip being created next to it. This method is most suitable for areas with flat terrain. Equipment to be used depends on geological conditions. For example, to remove overburden that is loose or unconsolidated, a bucket wheel excavator might be the most productive. The life of some area mines may be more than 50 years. The contour mining method consists of removing overburden from
2546-863: The coal resource may cause burial and loss of topsoil, exposes parent material, and creates large infertile wastelands. Soil disturbance and associated compaction result in conditions conducive to erosion. Soil removal from the area to be surface-mined alters or destroys many natural soil characteristics, and reduces its biodiversity and productivity for agriculture. Soil structure may be disturbed by pulverization or aggregate breakdown. Top 10 hard and brown coal producers in 2012 were (in million metric tons): China 3,621, United States 922, India 629, Australia 432, Indonesia 410, Russia 351, South Africa 261, Germany 196, Poland 144, and Kazakhstan 122. Coal has been mined in every state of Australia, but mainly in Queensland, New South Wales and Victoria. It
2613-579: The coal was transported by horse from this point, but this method was later replaced by the Stockton and Darlington Railway , which carried the coal to Newport on the River Tees . The Etherley Incline closed in 1843, and today it is designated as an ancient monument by English Heritage , and is thus protected. After World War II , the site at the foot of the incline was taken over by British Railways , which used it to dump spent ballast materials into
2680-429: The developed world. Modern coal mining in the US has an average 23 deaths per year due to mine accidents (2001–2020). However, in lesser developed countries and some developing countries, many miners continue to die annually, either through direct accidents in coal mines or through adverse health consequences from working under poor conditions. China , in particular, has the highest number of coal mining related deaths in
2747-455: The disruptive activities of blasting, ripping, and excavating coal. Stripping of overburden eliminates and destroys archeological and historic features, unless they are removed beforehand. The removal of vegetative cover and activities associated with the construction of haul roads, stockpiling of topsoil, displacement of overburden and hauling of soil and coal increase the quantity of dust around mining operations. Dust degrades air quality in
Witton Park Colliery - Misplaced Pages Continue
2814-571: The fatalities occurring in the first half of the 20th century. 3,242 died in 1907, the worst year ever; in 2020 there were five. Open cut hazards are principally mine wall failures and vehicle collisions; underground mining hazards include suffocation, gas poisoning, roof collapse, rock burst , outbursts , and gas explosions. Firedamp explosions can trigger the far more dangerous coal dust explosions, which can engulf an entire mine. Most of these risks are greatly reduced in modern mines, and multiple fatality incidents are now rare in most parts of
2881-457: The genetic soil profile, displaces or destroys wildlife and habitat, alters current land uses, and to some extent permanently changes the general topography of the area mined. Adverse impacts on geological features of human interest may occur in a coal strip mine. Geomorphic and geophysical features and outstanding scenic resources may be sacrificed by indiscriminate mining. Paleontological, cultural, and other historic values may be endangered due to
2948-450: The immediate area, has an adverse impact on vegetative life, and constitutes health and safety hazards for mine workers and nearby residents. Surface mining disrupts virtually all aesthetic elements of the landscape. Alteration of land forms often imposes unfamiliar and discontinuous configurations. New linear patterns appear as material is extracted and waste piles are developed. Different colors and textures are exposed as vegetative cover
3015-642: The immediate station area (including the siding connections into the museum), along with the single track section through Shildon tunnel to the west and terminus at Bishop Auckland . Bishop Auckland is the junction with the now privately owned and operated Weardale Railway to Stanhope . As of the May 2021 timetable change, the station is served by an hourly service between Saltburn and Bishop Auckland via Darlington . All services are operated by Northern Trains . Rolling stock used: Class 156 Super Sprinter and Class 158 Express Sprinter This article about
3082-552: The main source of primary energy for industry and transportation in industrial areas from the 18th century to the 1950s. Coal remains an important energy source. Coal is also mined today on a large scale by open pit methods wherever the coal strata strike the surface or are relatively shallow. Britain developed the main techniques of underground coal mining from the late 18th century onward, with further progress being driven by 19th-century and early 20th-century progress. However, oil and gas were increasingly used as alternatives from
3149-404: The majority of fatalities. Coal mining resulted in 47 fatalities that year. One study, though, has suggested that hazards of modern mining are now more accretive with workers facing long-term health impacts, such as sleep deprivation, that build up over time. Strip mining severely alters the landscape, which reduces the value of the natural environment in the surrounding land. The land surface
3216-461: The method of extraction. For example, a study has found that among surface coal mine operations, dragline equipment produced the loudest sound at a range of 88–112 dBA. Within longwall sections, stageloaders used to transport coal from the mining face and shearers used for extraction represent some of the highest noise exposures. Auxiliary fans (up to 120 dBA), continuous mining machines (up to 109 dBA), and roof bolters (up to 103 dBA) represent some of
3283-457: The mill— which spanned 1 mile (1.6 km) in length and .5 miles (0.80 km) in width— had been demolished. Today, only the shells of the No.5 and No.6 Blast Furnaces remain. Initially, coal distribution was carried out by horse and cart. However, due to the large volumes of coal being extracted and the high cost of distribution, a more efficient transportation method was needed. George Stephenson
3350-465: The mining workforce. in 2015 US coal mines had 65,971 employees, the lowest figure since EIA began collecting data in 1978. However, a 2016 study reported that a relatively minor investment would allow most coal workers to retrain for the solar energy industry. Coal mining has been a very dangerous activity and the list of historical coal mining disasters is long. In the U.S., 104,895 coal miners were killed in mine accidents since 1900, 90 percent of
3417-469: The noisiest equipment within continuous mining sections. Exposures to noise exceeding 90 dBA can lead to adverse effects on workers' hearing. The use of administrative controls and engineering controls can be used to reduce noise exposures. Improvements in mining methods (e.g. longwall mining), hazardous gas monitoring (such as safety-lamps or more modern electronic gas monitors), gas drainage, electrical equipment , and ventilation have reduced many of
SECTION 50
#17327931735383484-590: The open pit methods, due to thickness of the seam 20–25 metres (60–90 feet). Coals occurring below 90 m (300 ft) are usually deep mined. However, there are open pit mining operations working on coal seams up to 300–460 metres (1,000–1,500 feet) below ground level, for instance Tagebau Hambach in Germany. When coal seams are near the surface, it may be economical to extract the coal using open-cut , also referred to as open-cast, open-pit, mountaintop removal or strip, mining methods. Opencast coal mining recovers
3551-421: The operation reaches a predetermined stripping ratio (tons of overburden/tons of coal), it is not profitable to continue. Depending on the equipment available, it may not be technically feasible to exceed a certain height of highwall. At this point, it is possible to produce more coal with the augering method in which spiral drills bore tunnels into a highwall laterally from the bench to extract coal without removing
3618-408: The overburden. Mountaintop coal mining is a surface mining practice involving removal of mountaintops to expose coal seams, and disposing of associated mining overburden in adjacent "valley fills." Valley fills occur in steep terrain where there are limited disposal alternatives. Mountaintop removal mining combines area and contour strip mining methods. In areas with rolling or steep terrain with
3685-425: The potential to spontaneously ignite. Because most coal refuse harbors toxic components, it is not easily reclaimed by replanting with plants like beach grasses. The use of sophisticated sensing equipment to monitor air quality is common and has replaced the use of small animals such as canaries, often referred to as " miner's canaries ". In the United States, the increase in technology has significantly decreased
3752-588: The redevelopment of the Mary Ann drift mine into a deep colliery and the subsequent development of the George Pit, Corving Pit, and finally the William Pit. The commercial success of Witton Park Colliery spurred the development of additional coal mines in the surrounding area, resulting in nearly 100 pits being established within a 5 miles (8.0 km) radius over the next 150 years. After the closure of
3819-399: The risks of rock falls, explosions, and unhealthy air quality. Gases released during the mining process can be recovered to generate electricity and improve worker safety with gas engines . Another innovation in recent years is the use of closed circuit escape respirators , respirators that contain oxygen for situations where mine ventilation is compromised. Statistical analyses performed by
3886-565: The seam in a pattern following the contours along a ridge or around the hillside. This method is most commonly used in areas with rolling to steep terrain. It was once common to deposit the spoil on the downslope side of the bench thus created, but this method of spoil disposal consumed much additional land and created severe landslide and erosion problems. To alleviate these problems, a variety of methods were devised to use freshly cut overburden to refill mined-out areas. These haul-back or lateral movement methods generally consist of an initial cut with
3953-432: The spoil deposited downslope or at some other site and spoil from the second cut refilling the first. A ridge of undisturbed natural material 15 to 20 ft (5 to 6 m) wide is often intentionally left at the outer edge of the mined area. This barrier adds stability to the reclaimed slope by preventing spoil from slumping or sliding downhill. The limitations of contour strip mining are both economic and technical. When
4020-476: The surface or overburden, of the mining area. The overburden is then removed by draglines or by shovel and truck. Once the coal seam is exposed, it is drilled, fractured and thoroughly mined in strips. The coal is then loaded onto large trucks or conveyors for transport to either the coal preparation plant or directly to where it will be used. Most open cast mines in the United States extract bituminous coal . In Canada, Australia, and South Africa, open cast mining
4087-524: The two basic methods of mining. The choice of mining method depends primarily on depth, density, overburden, and thickness of the coal seam; seams relatively close to the surface, at depths less than approximately 55 m (180 ft), are usually surface mined. Coal that occurs at depths of 55 to 90 m (180 to 300 ft) are usually deep mined, but in some cases surface mining techniques can be used. For example, some western U.S. coal that occur at depths in excess of 60 m (200 ft) are mined by
SECTION 60
#17327931735384154-452: The use of draglines , trucks, conveyors , hydraulic jacks , and shearers. The coal mining industry has a long history of significant negative environmental impacts on local ecosystems, health impacts on local communities and workers, and contributes heavily to the global environmental crises, such as poor air quality and climate change . For these reasons, coal has been one of the first fossil fuels to be phased out of various parts of
4221-441: The world, with official statistics claiming that 6,027 deaths occurred in 2004. To compare, 28 deaths were reported in the U.S. in the same year. Coal production in China is twice that in the US, while the number of coal miners is around 50 times that of the US, making deaths in coal mines in China 4 times as common per worker (108 times as common per unit output) as in the US. Mine disasters have still occurred in recent years in
4288-544: Was constructed by Timothy Hackworth . It opened on 27 September 1825, under the Stockton and Darlington Railway . Station facilities here have been improved as part of the Tees Valley Metro project. The package for this station included new fully lit waiting shelters, digital CIS displays, renewed station signage and the installation of CCTV. The long-line Public Address system (PA) has been renewed and upgraded with pre-recorded train announcements. The station
4355-636: Was contracted to build a suitable railway to transport the coal down from the hills. He constructed the Etherley Incline Railway , which featured iron rails set on stone blocks. Opened in 1825, the railway used a stationary beam engine to control the descent of wagons from the colliery to the River Gaunless . Horses then pulled the wagons to the foot of the Brusselton Incline , which descended into Shildon . Initially,
4422-540: Was inaugurated on Guy Fawkes Day in 1873, and both furnaces were operational by early 1875. Each of these furnaces had a production capacity of 1,100 tons per week. As trade in iron declined and was gradually replaced by steel , the owners decided to relocate steel production to the coast in Cleveland to avoid railway transport charges. After partially closing in 1878, the ironworks were fully shut down on 19 May 1884. Deconstruction began almost immediately, and by 1900,
4489-531: Was mined, and 375.1 million tonnes was exported. In 2013/14, coal provided about 69% of Australia's electricity production. In 2013, Australia was the world's fifth-largest coal producer, after China, the United States, India, and Indonesia. However, in terms of proportion of production exported, Australia is the world's second largest coal exporter, as it exports roughly 73% of its coal production. Indonesia exports about 87% of its coal production. A court in Australia has cited climate change in ruling against
#537462