Misplaced Pages

#305694

74-562: A console server (also referred to as console access server, console management server, serial concentrator, or serial console server) is a device or service that provides access to the system console of a computing device via networking technologies. Although primarily used as an Interface Message Processor starting in 1971, the Honeywell 316 could also be configured as a Terminal Interface Processor ( TIP ) and provide terminal server support for up to 63 ASCII serial terminals through

148-409: A front panel to input or display bits and had to be connected to a terminal to print or input text through a keyboard. Teleprinters were used as early-day hard-copy terminals and predated the use of a computer screen by decades. The computer would typically transmit a line of data which would be printed on paper, and accept a line of data from a keyboard over a serial or other interface. Starting in

222-530: A modem , or over a network with terminal emulator software such as telnet or ssh , maintaining survivable connectivity that allows remote users to log in the various consoles without being physically nearby. Dedicated console server appliances are available from a number of manufacturers in many configurations, with the number of serial ports ranging from one to 96. These Console Servers are primarily used for secure remote access to Unix Servers, Linux Servers, switches, routers, firewalls, and any other device on

296-478: A built-in keyboard and display for the console. Some Unix-like operating systems such as Linux and FreeBSD have virtual consoles to provide several text terminals on a single computer. The fundamental type of application running on a text terminal is a command-line interpreter or shell , which prompts for commands from the user and executes each command after a press of Return . This includes Unix shells and some interactive programming environments. In

370-423: A console server that is more secure. However, this solution may have a higher TCO , less reliability and higher rack-space requirements, since most industrial console servers have the physical dimension of one rack unit (1U), whereas a desktop computer with full-size PCI cards requires at least 3U, making the home-grown solution more costly in the case of a co-located infrastructure. An alternative approach to

444-422: A console server used in some cluster setups is to null-modem wire and daisy-chain consoles to otherwise unused serial ports on nodes with some other primary function. System console A computer terminal is an electronic or electromechanical hardware device that can be used for entering data into, and transcribing data from, a computer or a computing system. Most early computers only had

518-430: A field that may have previously required a full screen-full of characters to be re-sent from the computer, possibly over a slow modem line. Around the mid-1980s most intelligent terminals, costing less than most dumb terminals would have a few years earlier, could provide enough user-friendly local editing of data and send the completed form to the main computer. Providing even more processing possibilities, workstations like

592-530: A green or amber screen. Typically terminals communicate with the computer via a serial port via a null modem cable, often using an EIA RS-232 or RS-422 or RS-423 or a current loop serial interface. IBM systems typically communicated over a Bus and Tag channel, a coaxial cable using a proprietary protocol, a communications link using Binary Synchronous Communications or IBM's SNA protocol, but for many DEC, Data General and NCR (and so on) computers there were many visual display suppliers competing against

666-622: A keyboard in 1941, as did the Z4 in 1942–1945. However, these consoles could only be used to enter numeric inputs and were thus analogous to those of calculating machines; programs, commands, and other data were entered via paper tape. Both machines had a row of display lamps for results. In 1956, the Whirlwind Mark ;I computer became the first computer equipped with a keyboard-printer combination with which to support direct input of data and commands and output of results. That device

740-461: A library such as ncurses . For more complex operations, the programs can use terminal specific ioctl system calls. For an application, the simplest way to use a terminal is to simply write and read text strings to and from it sequentially. The output text is scrolled, so that only the last several lines (typically 24) are visible. Unix systems typically buffer the input text until the Enter key

814-613: A microprocessor is built in, but not all terminals with microprocessors did any real processing of input: the main computer to which it was attached would have to respond quickly to each keystroke. The term "intelligent" in this context dates from 1969. Notable examples include the IBM 2250 , predecessor to the IBM 3250 and IBM 5080, and IBM 2260 , predecessor to the IBM 3270 , introduced with System/360 in 1964. Most terminals were connected to minicomputers or mainframe computers and often had

SECTION 10

#1732772529306

888-514: A multi-line controller in place of one of the hosts. Historically, a terminal server was a device that attached to serial RS-232 devices, such as "green screen" text terminals or serial printers, and transported traffic via TCP/IP , Telnet , SSH or other vendor-specific network protocols (e.g., LAT ) via an Ethernet connection. Digital Equipment Corporation 's DECserver 100 (1985), 200 (1986) and 300 (1991) are early examples of this technology. (An earlier version of this product, known as

962-594: A real-world terminal, sometimes allowing concurrent use of local programs and access to a distant terminal host system, either over a direct serial connection or over a network using, e.g., SSH . Today few if any dedicated computer terminals are being manufactured, as time sharing on large computers has been replaced by personal computers, handheld devices and workstations with graphical user interfaces. User interactions with servers use either software such as Web browsers , or terminal emulators, with connections over high-speed networks. The console of Konrad Zuse 's Z3 had

1036-593: A sequence of codes were sent to the terminal to try to read the cursor's position or the 25th line's contents using a sequence of different manufacturer's control code sequences, and the terminal-generated response would determine a single-digit number (such as 6 for Data General Dasher terminals, 4 for ADM 3A/5/11/12 terminals, 0 or 2 for TTYs with no special features) that would be available to programs to say which set of codes to use. The great majority of terminals were monochrome, manufacturers variously offering green, white or amber and sometimes blue screen phosphors. (Amber

1110-472: A shell, most of the commands are small applications themselves. Another important application type is that of the text editor . A text editor typically occupies the full area of display, displays one or more text documents, and allows the user to edit the documents. The text editor has, for many uses, been replaced by the word processor , which usually provides rich formatting features that the text editor lacks. The first word processors used text to communicate

1184-455: A slimmed-down Unix-like operating system such as Linux . Such "home-grown" console servers can be less expensive, especially if built from components that have been retired in upgrades and allow greater flexibility by putting full control of the software driving the device in the hands of the administrator. This includes full access to and configurability of a wide array of security protocols and encryption standards, making it possible to create

1258-455: A standard, AlphaWindows , that would allow a single CRT screen to implement multiple windows, each of which was to behave as a distinct terminal. Unfortunately, like I2O , this suffered from being run as a closed standard: non-members were unable to obtain even minimal information and there was no realistic way a small company or independent developer could join the consortium. An intelligent terminal does its own processing, usually implying

1332-446: A terminal as "intelligent" was its ability to process user-input within the terminal—not interrupting the main computer at each keystroke—and send a block of data at a time (for example: when the user has finished a whole field or form). Most terminals in the early 1980s, such as ADM-3A, TVI912, Data General D2, DEC VT52 , despite the introduction of ANSI terminals in 1978, were essentially "dumb" terminals, although some of them (such as

1406-456: A typical application the host sends the terminal a preformatted panel containing both static data and fields into which data may be entered. The terminal operator keys data, such as updates in a database entry, into the appropriate fields. When entry is complete (or ENTER or PF key pressed on 3270s), a block of data, usually just the data entered by the operator (modified data), is sent to the host in one transmission. The 3270 terminal buffer (at

1480-732: A variety of cost of doing business items, for example, ship and re-ship, and opportunity costs, while it also considers incentives developed for an alternative approach. Incentives and other variables include tax credits, common language, expedited delivery, and customer-oriented supplier visits. TCO, when incorporated in any financial benefit analysis, provides a cost basis for determining the total economic value of an investment. Examples include: return on investment , internal rate of return , economic value added , return on information technology, and rapid economic justification. A TCO analysis includes total cost of acquisition and operating costs , as well as costs related to replacement or upgrades at

1554-410: A variety of critical requirements and costs over the life of the building: A key objective of planning, constructing, operating, and managing buildings via TCO principals is for building owners and facility professionals to predict needs and deliver data-driven results.  TCO can be applied any time during the life of a facility asset to manage cost inputs for the life of the structure or system into

SECTION 20

#1732772529306

1628-402: Is " thin client ". A thin client typically uses a protocol like X11 for Unix terminals, or RDP for Microsoft Windows. The bandwidth needed depends on the protocol used, the resolution, and the color depth . Modern graphic terminals allow display of images in color, and of text in varying sizes, colors, and fonts (type faces). In the early 1990s, an industry consortium attempted to define

1702-415: Is a device or service that provides access to the system console of a computing device via networking technologies. Most commonly, a console server provides a number of serial ports , which are then connected to the serial ports of other equipment, such as servers, routers or switches. The consoles of the connected devices can then be accessed by connecting to the console server over a serial link such as

1776-442: Is a financial estimate intended to help buyers and owners determine the direct and indirect costs of a product or service. It is a management accounting concept that can be used in full cost accounting or even ecological economics where it includes social costs . For manufacturing, as TCO is typically compared with doing business overseas, it goes beyond the initial manufacturing cycle time and cost to make parts. TCO includes

1850-406: Is a serial computer interface for text entry and display. Information is presented as an array of pre-selected formed characters . When such devices use a video display such as a cathode-ray tube , they are called a " video display unit " or "visual display unit" (VDU) or "video display terminal" (VDT). The system console is often a text terminal used to operate a computer. Modern computers have

1924-522: Is a type of computer terminal that communicates with its host in blocks of data, as opposed to a character-oriented terminal that communicates with its host one character at a time. A block-oriented terminal may be card-oriented, display-oriented, keyboard-display, keyboard-printer, printer or some combination. The IBM 3270 is perhaps the most familiar implementation of a block-oriented display terminal, but most mainframe computer manufacturers and several other companies produced them. The description below

1998-495: Is achieved via RS-232 serial links, Ethernet or other proprietary protocols . Character-oriented terminals can be "dumb" or "smart". Dumb terminals are those that can interpret a limited number of control codes (CR, LF, etc.) but do not have the ability to process special escape sequences that perform functions such as clearing a line, clearing the screen, or controlling cursor position. In this context dumb terminals are sometimes dubbed glass Teletypes , for they essentially have

2072-476: Is easily applicable to the transportation industry and to motor vehicle ownership, for example, the TCO defines the cost of owning an automobile from the time of purchase by the owner, through its operation and maintenance to the time it leaves the possession of the owner. Comparative TCO studies between various models help consumers choose a car to fit their needs and budget. Some of the key elements incorporated in

2146-462: Is in terms of the 3270, but similar considerations apply to other types. Block-oriented terminals typically incorporate a buffer which stores one screen or more of data, and also stores data attributes, not only indicating appearance (color, brightness, blinking, etc.) but also marking the data as being enterable by the terminal operator vs. protected against entry, as allowing the entry of only numeric information vs. allowing any characters, etc. In

2220-400: Is limited, the number of concurrent lines that can be displayed at one time is limited. Vector-mode displays were historically important but are no longer used. Practically all modern graphic displays are raster-mode, descended from the picture scanning techniques used for television , in which the visual elements are a rectangular array of pixels . Since the raster image is only perceptible to

2294-444: Is pressed, so the application receives a ready string of text. In this mode, the application need not know much about the terminal. For many interactive applications this is not sufficient. One of the common enhancements is command-line editing (assisted with such libraries as readline ); it also may give access to command history. This is very helpful for various interactive command-line interpreters. Even more advanced interactivity

Terminal server - Misplaced Pages Continue

2368-428: Is provided with full-screen applications. Those applications completely control the screen layout; also they respond to key-pressing immediately. This mode is very useful for text editors, file managers and web browsers . In addition, such programs control the color and brightness of text on the screen, and decorate it with underline, blinking and special characters (e.g. box-drawing characters ). To achieve all this,

2442-641: The DECSA Terminal Server was actually a test-bed or proof-of-concept for using the proprietary LAT protocol in commercial production networks.) With the introduction of inexpensive flash memory components, Digital's later DECserver 700 (1991) and 900 (1995) no longer shared with their earlier units the need to download their software from a "load host" (usually a Digital VAX or Alpha) using Digital's proprietary Maintenance Operations Protocol (MOP). In fact, these later terminal server products also included much larger flash memory and full support for

2516-509: The IBM 2741 (1965) and the DECwriter (1970). Respective top speeds of teletypes, IBM 2741 and the LA30 (an early DECwriter) were 10, 15 and 30 characters per second. Although at that time "paper was king" the speed of interaction was relatively limited. The DECwriter was the last major printing-terminal product. It faded away after 1980 under pressure from video display units (VDUs), with

2590-750: The Intel 8080 . This made them inexpensive and they quickly became extremely popular input-output devices on many types of computer system, often replacing earlier and more expensive printing terminals. After 1970 several suppliers gravitated to a set of common standards: The experimental era of serial VDUs culminated with the VT100 in 1978. By the early 1980s, there were dozens of manufacturers of terminals, including Lear-Siegler , ADDS , Data General, DEC , Hazeltine Corporation , Heath/Zenith , Hewlett-Packard , IBM, TeleVideo , Volker-Craig, and Wyse , many of which had incompatible command sequences (although many used

2664-506: The VT220 terminal strongly influenced the Model M shipped on IBM PCs from 1985, and through it all later computer keyboards. Although flat-panel displays were available since the 1950s, cathode-ray tubes continued to dominate the market until the personal computer had made serious inroads into the display terminal market. By the time cathode-ray tubes on PCs were replaced by flatscreens after

2738-584: The ASR Teletype models, included a paper tape reader and punch which could record output such as a program listing. The data on the tape could be re-entered into the computer using the tape reader on the teletype, or printed to paper. Teletypes used the current loop interface that was already used in telegraphy. A less expensive Read Only (RO) configuration was available for the Teletype. Custom-designs keyboard/printer terminals that came later included

2812-524: The LAN, or over the Internet, is encrypted. Marketing a product as a console server is very application specific because it really refers to what the user wants to do—remotely control, monitor, diagnose and troubleshoot equipment over a network or the Internet. Some users have created their own console servers using off-the-shelf commodity computer hardware, usually with multiport serial cards typically running

2886-658: The TeleVideo TS-800 could run CP/M-86 , blurring the distinction between terminal and Personal Computer. Another of the motivations for development of the microprocessor was to simplify and reduce the electronics required in a terminal. That also made it practicable to load several "personalities" into a single terminal, so a Qume QVT-102 could emulate many popular terminals of the day, and so be sold into organizations that did not wish to make any software changes. Frequently emulated terminal types included: Total cost of ownership Total cost of ownership ( TCO )

2960-575: The Telnet part of the TCP/IP protocol suite. Many other companies entered the terminal-server market with devices pre-loaded with software fully compatible with LAT and Telnet. A "terminal server" is used many ways but from a basic sense if a user has a serial device and they need to move data over the LAN, this is the product they need. A console server ( console access server , console management server , serial concentrator , or serial console server )

3034-446: The advent of time-sharing systems, terminals slowly pushed these older forms of interaction from the industry. Related developments were the improvement of terminal technology and the introduction of inexpensive video displays . Early Teletypes only printed out with a communications speed of only 75 baud or 10 5-bit characters per second, and by the 1970s speeds of video terminals had improved to 2400 or 9600 2400 bit/s . Similarly,

Terminal server - Misplaced Pages Continue

3108-642: The application must deal not only with plain text strings, but also with control characters and escape sequences, which allow moving the cursor to an arbitrary position, clearing portions of the screen, changing colors and displaying special characters, and also responding to function keys. The great problem here is that there are many different terminals and terminal emulators, each with its own set of escape sequences. In order to overcome this, special libraries (such as curses ) have been created, together with terminal description databases, such as Termcap and Terminfo. A block-oriented terminal or block mode terminal

3182-569: The computer manufacturer for terminals to expand the systems. In fact, the instruction design for the Intel 8008 was originally conceived at Computer Terminal Corporation as the processor for the Datapoint 2200 . From the introduction of the IBM 3270 , and the DEC VT100 (1978), the user and programmer could notice significant advantages in VDU technology improvements, yet not all programmers used

3256-600: The development of the VDU were the Univac Uniscope and the IBM 2260 , both in 1964. These were block-mode terminals designed to display a page at a time, using proprietary protocols; in contrast to character-mode devices, they enter data from the keyboard into a display buffer rather than transmitting them immediately. In contrast to later character-mode devices, the Uniscope used synchronous serial communication over an EIA RS-232 interface to communicate between

3330-479: The device) could be updated on a single character basis, if necessary, because of the existence of a "set buffer address order" (SBA), that usually preceded any data to be written/overwritten within the buffer. A complete buffer could also be read or replaced using the READ BUFFER command or WRITE command (unformatted or formatted in the case of the 3270). Block-oriented terminals cause less system load on

3404-423: The display, as well as the ability to switch emulation modes to mimic competitor's models, that became increasingly important selling features during the 1980s especially, when buyers could mix and match different suppliers' equipment to a greater extent than before. The advance in microprocessors and lower memory costs made it possible for the terminal to handle editing operations such as inserting characters within

3478-564: The early ADM-3 as a starting point). The great variations in the control codes between makers gave rise to software that identified and grouped terminal types so the system software would correctly display input forms using the appropriate control codes; In Unix-like systems the termcap or terminfo files, the stty utility, and the TERM environment variable would be used; in Data General's Business BASIC software, for example, at login-time

3552-414: The end of the life cycle. A TCO analysis is used to gauge the viability of any capital investment . An enterprise may use it as a product/process comparison tool. It is also used by credit markets and financing agencies. TCO directly relates to an enterprise's asset and/or related systems total costs across all projects and processes, thus giving a picture of the profitability over time. TCO analysis

3626-624: The fact that early character-mode terminals were often deployed to replace teletype machines as a way to reduce operating costs. The next generation of VDUs went beyond teletype emulation with an addressable cursor that gave them the ability to paint two-dimensional displays on the screen. Very early VDUs with cursor addressibility included the VT05 and the Hazeltine 2000 operating in character mode, both from 1970. Despite this capability, early devices of this type were often called "Glass TTYs". Later,

3700-460: The features of the new terminals ( backward compatibility in the VT100 and later TeleVideo terminals, for example, with "dumb terminals" allowed programmers to continue to use older software). Some dumb terminals had been able to respond to a few escape sequences without needing microprocessors: they used multiple printed circuit boards with many integrated circuits ; the single factor that classed

3774-427: The following as part of TCO: In the case of comparing TCO of existing versus proposed solutions, consideration should be put toward costs required to maintain the existing solution that may not necessarily be required for a proposed solution. Examples include cost of manual processing that are only required to support lack of existing automation, and extended support personnel. Total cost of ownership can be applied to

SECTION 50

#1732772529306

3848-457: The foundation of a standardized and holistic approach to implementing TCO key principles. Implementation of TCO key principles can improve decision making, maximizing financial strategies over the life of an asset, starting at the planning and design stage and extends to the end of the asset's life. APPA 1000-2, slated for publication in 2019, will focus on implementation and application of key TCO principals in facility management. The TCO concept

3922-455: The future. APPA, an ANSI Accredited Standards Developer, published APPA 1000-1 – Total Cost of Ownership for Facilities Asset Management (TCO) – Part 1: Key Principles as an American National Standard in December 2017.  APPA 1000-1 provides financial officers, facility professionals, architects, planners, construction workforce, and operations and maintenance (O&M) personnel

3996-548: The host and less network traffic than character-oriented terminals. They also appear more responsive to the user, especially over slow connections, since editing within a field is done locally rather than depending on echoing from the host system. Early terminals had limited editing capabilities – 3270 terminals, for example, only could check entries as valid numerics. Subsequent "smart" or "intelligent" terminals incorporated microprocessors and supported more local processing. Programmers of block-oriented terminals often used

4070-505: The host computer for its processing power is called a " dumb terminal " or a thin client . In the era of serial ( RS-232 ) terminals there was a conflicting usage of the term "smart terminal" as a dumb terminal with no user-accessible local computing power but a particularly rich set of control codes for manipulating the display; this conflict was not resolved before hardware serial terminals became obsolete. A personal computer can run terminal emulator software that replicates functions of

4144-429: The human eye as a whole for a very short time, the raster must be refreshed many times per second to give the appearance of a persistent display. The electronic demands of refreshing display memory meant that graphic terminals were developed much later than text terminals, and initially cost much more. Most terminals today are graphical; that is, they can show images on the screen. The modern term for graphical terminal

4218-812: The last revision (the DECwriter IV of 1982) abandoning the classic teletypewriter form for one more resembling a desktop printer. A video display unit (VDU) displays information on a screen rather than printing text to paper and typically uses a cathode-ray tube (CRT). VDUs in the 1950s were typically designed for displaying graphical data rather than text and were used in, e.g., experimental computers at institutions like MIT ; computers used in academia, government and business, sold under brand names like DEC , ERA , IBM and UNIVAC ; military computers supporting specific defence applications such as ballistic missile warning systems and radar/air defence coordination systems like BUIC and SAGE . Two early landmarks in

4292-431: The later ADM and TVI models) did have a primitive block-send capability. Common early uses of local processing power included features that had little to do with off-loading data processing from the host computer but added useful features such as printing to a local printer, buffered serial data transmission and serial handshaking (to accommodate higher serial transfer speeds), and more sophisticated character attributes for

4366-559: The mid-1970s with microcomputers such as the Sphere 1 , Sol-20 , and Apple I , display circuitry and keyboards began to be integrated into personal and workstation computer systems, with the computer handling character generation and outputting to a CRT display such as a computer monitor or, sometimes, a consumer TV, but most larger computers continued to require terminals. Early terminals were inexpensive devices but very slow compared to punched cards or paper tape for input; with

4440-404: The multiplexer and the host, while the 2260 used either a channel connection or asynchronous serial communication between the 2848 and the host. The 2265, related to the 2260, also used asynchronous serial communication. The Datapoint 3300 from Computer Terminal Corporation , announced in 1967 and shipped in 1969, was a character-mode device that emulated a Model 33 Teletype . This reflects

4514-417: The network with a console port. The purpose is to allow network operations center (NOC) personnel to perform secure remote data center management and out-of-band management of IT assets from anywhere in the world. Products marketed as Console Servers usually have highly advanced security functionality to ensure that only qualified personnel can access various servers and that any data that is transmitted across

SECTION 60

#1732772529306

4588-407: The operator attempted to enter more data into the field than allowed. A graphical terminal can display images as well as text. Graphical terminals are divided into vector-mode terminals, and raster mode . A vector-mode display directly draws lines on the face of a cathode-ray tube under control of the host computer system. The lines are continuously formed, but since the speed of electronics

4662-472: The same limited functionality as does a mechanical Teletype. This type of dumb terminal is still supported on modern Unix-like systems by setting the environment variable TERM to dumb . Smart or intelligent terminals are those that also have the ability to process escape sequences, in particular the VT52, VT100 or ANSI escape sequences. A text terminal , or often just terminal (sometimes text console )

4736-413: The screen usually causes the terminal to scroll down one line, entering data into the last screen position on a block-oriented terminal usually causes the cursor to wrap — move to the start of the first enterable field. Programmers might "protect" the last screen position to prevent inadvertent wrap. Likewise a protected field following an enterable field might lock the keyboard and sound an audible alarm if

4810-415: The simplest form, a text terminal is like a file. Writing to the file displays the text and reading from the file produces what the user enters. In Unix-like operating systems, there are several character special files that correspond to available text terminals. For other operations, there are special escape sequences , control characters and termios functions that a program can use, most easily via

4884-441: The speed of remote batch terminals had improved to 4800 bit/s at the beginning of the decade and 19.6 kbps by the end of the decade, with higher speeds possible on more expensive terminals. The function of a terminal is typically confined to transcription and input of data; a device with significant local, programmable data-processing capability may be called a "smart terminal" or fat client . A terminal that depends on

4958-443: The structure and systems of a single building or a campus of buildings. Pioneered by Doug Christensen and the facilities department at Brigham Young University starting in the 1980s, the concept gained more traction in educational facilities in the early 21st century. The application of TCO in facilities goes beyond the predictive cost analysis for a new building’s “first cost” (planning, construction and commissioning), to factor in

5032-494: The structure of the document, but later word processors operate in a graphical environment and provide a WYSIWYG simulation of the formatted output. However, text editors are still used for documents containing markup such as DocBook or LaTeX . Programs such as Telix and Minicom control a modem and the local terminal to let the user interact with remote servers. On the Internet , telnet and ssh work similarly. In

5106-511: The technique of storing context information for the transaction in progress on the screen, possibly in a hidden field, rather than depending on a running program to keep track of status. This was the precursor of the HTML technique of storing context in the URL as data to be passed as arguments to a CGI program. Unlike a character-oriented terminal, where typing a character into the last position of

5180-474: The term "glass TTY" tended to be restrospectively narrowed to devices without full cursor addressibility. The classic era of the VDU began in the early 1970s and was closely intertwined with the rise of time sharing computers . Important early products were the ADM-3A , VT52 , and VT100 . These devices used no complicated CPU , instead relying on individual logic gates , LSI chips, or microprocessors such as

5254-417: The year 2000, the hardware computer terminal was nearly obsolete. A character-oriented terminal is a type of computer terminal that communicates with its host one character at a time, as opposed to a block-oriented terminal that communicates in blocks of data. It is the most common type of data terminal, because it is easy to implement and program. Connection to the mainframe computer or terminal server

5328-603: Was a Friden Flexowriter , which would continue to serve this purpose on many other early computers well into the 1960s. Early user terminals connected to computers were, like the Flexowriter, electromechanical teleprinters /teletypewriters (TeleTYpewriter, TTY), such as the Teletype Model ;33 , originally used for telegraphy ; early Teletypes were typically configured as Keyboard Send-Receive (KSR) or Automatic Send-Receive (ASR). Some terminals, such as

5402-499: Was claimed to reduce eye strain). Terminals with modest color capability were also available but not widely used; for example, a color version of the popular Wyse WY50, the WY350, offered 64 shades on each character cell. VDUs were eventually displaced from most applications by networked personal computers, at first slowly after 1985 and with increasing speed in the 1990s. However, they had a lasting influence on PCs. The keyboard layout of

5476-579: Was popularized by the Gartner Group in 1987. The roots of this concept date at least back to the first quarter of the twentieth century. Many different methodologies and software tools have been developed to analyze TCO in various operational contexts. TCO is applied to the analysis of information technology products, seeking to quantify the financial impact of deploying a product over its life cycle . These technologies include software and hardware, and training. Technology deployment can include

#305694