Misplaced Pages

#563436

82-522: Tuaikaepau was a twenty-ton cutter , 51 feet (16 m) length, clipper bow, keeler, designed by Archibald Logan and built by Logan Brothers of Auckland , New Zealand and launched in 1903. In July 1962 the Tuaikaepau was under sail between Tonga and Auckland, carrying a crew and passengers totalling 17. On 7 July 1962 the Tuaikaepau , under the command of captain David Fifita, hit

164-646: A cox and passengers. The organisers of the Great River Race developed the modern version in the 1980s and now many of the fleet of 24 compete annually in this "Marathon of the River". Watermen's cutters also compete annually in the Port of London Challenge, and the Port Admirals' Challenge. Cutter races are also to be found at various town rowing and skiffing regattas . In addition the cutters perform

246-470: A ringtail to the mainsail and studding sails to the square sails. It was not unknown for cutters to use a removable mizzen mast for use when reaching , setting a lugsail . Since the boom of the mainsail overhung the stern, the mast would have to be removed to tack or gybe. The dimensions of an 18th-century cutter purchased by the Royal Navy in 1763, and roughly in the middle of the size range of

328-473: A boat with two headsails would be termed a sloop if the mast has a more forward position and the bowsprit is permanently rigged. An example of this is the Friendship Sloop . A traditional cutter, by contrast, has a running bowsprit and the jib is set flying on a traveller that is hauled out to the end of the bowsprit. In a vessel such as a Bristol Channel Pilot Cutter , a storm jib might be set on

410-448: A cargo-carrying hull that has some sharpness. In the right conditions and with a capable captain, some of these achieved notable quick passages. They were also able to pay their way when the high freight rates often paid to a fast sailing ship were not available (in a fluctuating market). The term "clipper" applied to vessels between these two categories. They often made passages as fast as extreme clippers, but had less difficulty in making

492-423: A dipping lug fore-sail and a sprit mizzen. For much of the 19th century, and into the 20th, cutters were rigged with a dipping lug on the foremast and a standing lug on the mizzen. This made them similar to many of the luggers worked from the beaches and harbours of Britain. The sail plan illustration here (1880 Sail Plan) even replicates the civilian lugger terminology of having a fore and mizzen mast, and not using

574-428: A full complement of fore and aft sails. In civilian use, cutters were mostly involved in smuggling . The navy and coastguard therefore also used cutters in an attempt to catch those operating illegally. The term cutter appeared in the early 18th century as a description of a hull type. These vessels were designed for speed and the name was used in a similar way to clipper in the next century. The concept of hull type

656-419: A full range of extra light weather sails. The mainsail had a boom that extended beyond the stern. Square sails consisted of a course , topsail and topgallant . In earlier examples (before 1800) the topsail's foot had a large amount of roach and was sheeted to a separate yard that was set below the main yard (which carried the course). The headsails were a staysail , set on the forestay (which fastened to

738-606: A hull of the same external shape. After 1869, with the opening of the Suez Canal that greatly advantaged steam vessels (see Decline below), the tea trade collapsed for clippers. From the late 1860s until the early 1870s, the clipper trade increasingly focused on the Britain to Australia and New Zealand route, carrying goods and immigrants, services that had begun earlier with the Australian Gold Rush of

820-453: A large number for use in controlling smuggling, as "advice boats" (carrying dispatches), or against privateers . The characteristic cutter hull shape was wide; many had a length to breadth ratio of 3 to 1. It had a lot of deadrise and fine lines. A huge amount of sail could be set on these beamy hulls. The rig became standardised as having one mast, a gaff-rigged mainsail , square sails and several headsails – together with

902-616: A living when freight rates were lower. The first ships to which the term "clipper" seems to have been applied were the Baltimore clippers, developed in the Chesapeake Bay before the American Revolution , and reached their zenith between 1795 and 1815. They were small, rarely exceeding 200 tons OM . Their hulls were sharp ended and displayed much deadrise. They were rigged as schooners, brigs, or brigantines. In

SECTION 10

#1732798461564

984-463: A match and lit a fire to run the still. The fire was kept burning almost constantly with wood from the hull of the wreck in which they were living. By the end of August it was decided that the only hope of rescue was to build a small boat and sail to Fiji , which they promptly did with tools found in the hull of the Japanese boat and from the wreck of Tuaikaepau . The makeshift outrigger canoe, with

1066-410: A more evolutionary, multiple-step development of the type. ) She measured 494 tons OM , and was built on the enlarged lines of a Baltimore clipper, with sharply raked stem , counter stern , and square rig. Although Ann McKim was the first large clipper ship ever constructed, she cannot be said to have founded the clipper ship era, or even that she directly influenced shipbuilders, since no other ship

1148-560: A reefed bowsprit, with the bowsprit partially run in from its most fully extended position. The watermen of London used similar boats in the 18th century often decorated as depicted in historical prints and pictures of the River Thames in the 17th and 18th centuries. The modern waterman's cutter is based on drawings of these boats. They are 34 feet (10 m) long with a beam of 4 ft 6 in (1.37 m). They can have up to six oarsmen either rowing or sculling and can carry

1230-625: A replacement for her pinnace. In 1722, another ship had a cutter issued for a voyage to India, and by 1740 substantial numbers of cutters were being bought from Deal boatbuilders to equip Navy ships. The size of these boats varied from 15 to 20 feet (4.6 to 6.1 m) in length. The 1740 purchases coincided with a decision to increase the number of boats carried by warships. During the Seven Years' War cutters were found particularly useful for cruising ships, being seaworthy and useful for boarding. However, they were more susceptible to damage than

1312-475: A sleek, graceful appearance, less sheer, less freeboard, lower bulwarks, and smaller breadth. They were built for the China tea trade, starting with Falcon in 1859, and continuing until 1870. The earlier ships were made from wood, though some were made from iron, just as some British clippers had been made from iron prior to 1859. In 1863, the first tea clippers of composite construction were brought out, combining

1394-454: A type of fast-sailing vessel introduced in the 18th century, some of which were used as small warships. As a sailing rig, a cutter is a single-masted boat, with two or more headsails. On the eastern side of the Atlantic , the two headsails on a single mast is the fullest extent of the modern definition. In U.S. waters, a greater level of complexity applies, with the placement of the mast and

1476-406: Is Cutty Sark , preserved in dry dock at Greenwich , United Kingdom. Damaged by fire on 21 May 2007 while undergoing conservation, the ship was permanently elevated 3.0 m above the dry dock floor in 2010 as part of a plan for long-term preservation. Clippers were built for seasonal trades such as tea, where an early cargo was more valuable, or for passenger routes. One passenger ship survives,

1558-465: Is the older of the two survivors, and was transported to Australia for conservation. The clipper legacy appears in collectible cards and in the name of a basketball team . Departures of clipper ships, mostly from New York and Boston to San Francisco, were advertised by clipper-ship sailing cards. These cards, slightly larger than today's postcards, were produced by letterpress and wood engraving on coated card stock. Most clipper cards were printed in

1640-474: The City of Adelaide designed by William Pile of Sunderland . The fast ships were ideally suited to low-volume, high-profit goods, such as tea, opium , spices, people, and mail. The return could be spectacular. The Challenger returned from Shanghai with "the most valuable cargo of tea and silk ever to be laden in one bottom". Competition among the clippers was public and fierce, with their times recorded in

1722-745: The Bristol Channel brought about over many years the development of the specialist Bristol Channel Pilot Cutter . According to records from Pill, Somerset now housed in the Bristol Museum , the first official Bristol Channel pilot was barge master George James Ray, appointed by the Corporation of Bristol in May 1497 to pilot John Cabot 's Matthew from Bristol harbour to the open sea beyond. In 1837 Pilot George Ray guided Brunel 's SS  Great Western , and in 1844 William Ray piloted

SECTION 20

#1732798461564

1804-572: The Rainbow , had a top speed of 14 knots.) Eleven other instances are reported of a ship's logging 18 knots (33 km/h) or over. Ten of these were recorded by American clippers. Besides the breath-taking 465-nautical-mile (861 km) day's run of the Champion of the Seas , 13 other cases are known of a ship's sailing over 400 nautical miles (740 km) in 24 hours. With few exceptions, though, all

1886-616: The Royal Navy in 1780 in the West Indies ;– represents the earliest draught of what became known as the Baltimore clipper. Vessels of the Baltimore clipper type continued to be built for the slave trade, being useful for escaping enforcement of the British and American legislation prohibiting the trans-Atlantic slave trade. Some of these Baltimore clippers were captured when working as slavers, condemned by

1968-658: The War of 1812 , some were lightly armed, sailing under letters of marque and reprisal , when the type – exemplified by Chasseur , launched at Fells Point, Baltimore in 1814 – became known for her incredible speed; the deep draft enabled the Baltimore clipper to sail close to the wind . Clippers, running the British blockade of Baltimore, came to be recognized for speed rather than cargo space. The type existed as early as 1780. A 1789 drawing of HMS  Berbice  (1780)  – purchased by

2050-597: The fuel efficiency to carry sufficient cargo to make a profitable voyage. The auxiliary steamships struggled to make any profit. The situation changed in 1866 when the Alfred Holt -designed and owned SS Agamemnon made her first voyage to China. Holt had persuaded the Board of Trade to allow higher steam pressures in British merchant vessels. Running at 60  psi instead of the previously permitted 25 psi, and using an efficient compound engine , Agamemnon had

2132-462: The 1844-built Houqua , 581 tons OM. These larger vessels were built predominantly for use in the China tea trade and known as "tea clippers". Then in 1845 Rainbow , 757 tons OM, the first extreme clipper, was launched in New York. These American clippers were larger vessels designed to sacrifice cargo capacity for speed. They had a bow lengthened above the water, a drawing out and sharpening of

2214-547: The 1850s and 1860s, and represented the first pronounced use of color in American advertising art. Perhaps 3,500 cards survive. With their rarity and importance as artifacts of nautical, Western, and printing history, clipper cards are valued by both private collectors and institutions. The Los Angeles Clippers of the National Basketball Association take their name from the type of ship. After

2296-476: The 1850s. British-built clipper ships and many American-built, British-owned ships were used. Even in the 1880s, sailing ships were still the main carriers of cargo between Britain, and Australia and New Zealand . This trade eventually became unprofitable, and the ageing clipper fleet became unseaworthy. Before the early 18th century, the East India Company paid for its tea mainly in silver. When

2378-528: The Atlantic. The United States was just starting to recover from this in 1861 when the American Civil War started, causing significant disruption to trade in both Union and Confederate states. As the economic situation deteriorated in 1853, American shipowners either did not order new vessels, or specified an ordinary clipper or a medium clipper instead of an extreme clipper. No extreme clipper

2460-508: The Australia and timber trades. Clipper ships largely ceased being built in American shipyards in 1859 when, unlike the earlier boom years, only four clipper ships were built; a few were built in the 1860s. British clipper ships continued to be built after 1859. From 1859, a new design was developed for British clipper ships that was nothing like the American clippers; these ships continued to be called extreme clippers. The new design had

2542-526: The Chinese emperor chose to embargo European-manufactured commodities and demand payment for all Chinese goods in silver, the price rose, restricting trade. The East India Company began to produce opium in India, something desired by the Chinese as much as tea was by the British. This had to be smuggled into China on smaller, fast-sailing ships, called "opium clippers". Some of these were built specifically for

Tuaikaepau - Misplaced Pages Continue

2624-663: The Netherlands, and other nations also produced some. Clippers sailed all over the world, primarily on the trade routes between the United Kingdom and China, in transatlantic trade, and on the New York-to-San Francisco route around Cape Horn during the California gold rush . Dutch clippers were built beginning in the 1850s for the tea trade and passenger service to Java . The boom years of

2706-467: The appropriate court, and sold to owners who then used them as opium clippers – moving from one illegal international trade to another. Ann McKim , built in Baltimore in 1833 by the Kennard & Williamson shipyard, is considered by some to be the original clipper ship. (Maritime historians Howard I. Chapelle and David MacGregor decry the concept of the "first" clipper, preferring

2788-413: The barges and pinnaces that were types of ship's boat used in the Royal Navy – one distinctive resulting feature of this was the washstrake added to increase the freeboard . It was pierced with rowlock cut-outs for the oars, so that the thwarts did not need to be set unusually high to achieve the right geometry for efficient use. Cutters, as decked sailing vessels designed for speed, came into use in

2870-442: The batch of 30 bought that year ( HMS  Fly ) are: length on deck 47 feet 6 inches (14.48 m), beam 20 feet 10.25 inches (6.3564 m), measuring just over 78 tons bm . Smuggling cutters ranged from 30 tons (captured in 1747) to 140 tons. The Revenue cutters increased in size to match the vessels they attempted to catch – Repulse , of 210 tons was built in 1778. A determining factor on size

2952-415: The best of both worlds. Composite clippers had the strength of an iron hull framework but with wooden planking that, with properly insulated fastenings, could use copper sheathing without the problem of galvanic corrosion . Copper sheathing prevented fouling and teredo worm , but could not be used on iron hulls. The iron framework of composite clippers was less bulky and lighter, so allowing more cargo in

3034-418: The block coefficient of fineness or the prismatic coefficient of various clippers, but measured drawings or accurate half models may not exist to calculate either of these figures. An alternative measure of sharpness for hulls of a broadly similar shape is the coefficient of underdeck tonnage, as used by David MacGregor in comparing tea clippers. This could be calculated from the measurements taken to determine

3116-441: The boats of that time (which had more rounded bows) and a transom stern. A distinctive feature was that the washstrake had cut-outs (called rowlocks ) in which the oars were worked, unlike most boats of the period, that used thole pins as the pivot point for the oars. This allowed a higher freeboard, which was helpful if sailing – when the cut-outs were filled with wooden shutters (often mis-called poppets ) to keep

3198-434: The captain and two others on board, reached Kadavu Island with the news that there were 13 survivors shipwrecked on the reef, although the captain's son, one of the two crewmembers, died just before arriving at Kadavu, drowning while swimming ashore. On Monday 16 October, an RNZAF Sunderland flying boat from Laucala Bay, Fiji, flown by Group Captain J.D. Robbins, dropped supplies to them. The next day, Tuesday 16 October,

3280-547: The clipper era began in 1843 in response to a growing demand for faster delivery of tea from China and continued with the demand for swift passage to gold fields in California and Australia beginning in 1848 and 1851, respectively. The era ended with the opening of the Suez Canal in 1869. The etymological origin of the word clipper is uncertain, but is believed to be derived from the English language verb "to clip", which at

3362-537: The details vary from country to country, generally these are small ships that can remain at sea for extended periods and in all usual weather conditions. Many, but not all, are armed. Uses include control of a country's borders and preventing smuggling. Cutters as ship's boats came into use in the early 18th century (dating which roughly coincides with the decked sailing vessels described below). These were clinker-built open boats which were fitted for propulsion by both oar and sail. They were more optimised for sailing than

Tuaikaepau - Misplaced Pages Continue

3444-467: The early part of the 18th century. When first introduced, the term applied largely to the hull form, in the same way that clipper was used almost a hundred years later. Some of these 18th and 19th century examples were rigged as ketches or brigs . However, the typical rig, especially in Naval or revenue protection use, was a single-masted rig setting a huge amount of sail. Square sails were set, as well as

3526-455: The final days of the slave trade ( circa 1835–1850) – just as the type was dying out – the term, Baltimore clipper , became common. The common retrospective application of the word "clipper" to this type of vessel has caused confusion. The Oxford English Dictionary's earliest quote (referring to the Baltimore clipper) is from 1824. The dictionary cites Royal Navy officer and novelist Frederick Marryat as using

3608-575: The forward body, and the greatest breadth further aft. Extreme clippers were built in the period 1845 to 1855. In 1851, shipbuilders in Medford, Massachusetts, built what is sometimes called one of the first medium clippers, the Antelope , often called the Antelope of Boston to distinguish her from other ships of the same name. A contemporary ship-design journalist noted that "the design of her model

3690-609: The fuel efficiency to steam at 10 knots to China and back, with coaling stops at Mauritius on the outward and return legs – crucially carrying sufficient cargo to make a profit. In 1869, the Suez Canal opened, giving steamships a route about 3,000 nautical miles (5,600 km; 3,500 mi) shorter than that taken by sailing ships round the Cape of Good Hope. Despite initial conservatism by tea merchants, by 1871, tea clippers found strong competition from steamers in

3772-421: The harbour to operate within their jurisdiction , pilots were generally self-employed, and the quickest transport meant greater income. As their fishing boats were heavy working boats, and filled with fishing equipment, they needed a new type of boat; early boats were developed from single masted fishing cutter designs and twin masted yawls , and latterly into the specialist pilot cutter. The natural dangers of

3854-441: The heavier boats that they replaced and much less capable of carrying heavy weights, such as anchors and water casks. The range of sizes available steadily increased. By 1817 the cutters issued came in 17 different lengths, from 12 to 34 feet (3.7 to 10.4 m). This big variety was reduced when the Royal Navy's warships moved to steam propulsion. Since drinking water could now be distilled on board, ships no longer needed to have

3936-573: The hulks in smaller boats. In the UK, the Border Force (successor to the UK Border Agency and HM Customs and Excise ) currently operates a fleet of 42 m corvette -type vessels throughout UK territorial waters as border cutters, inspecting vessels for illicit cargoes. Clipper A clipper was a type of mid-19th-century merchant sailing vessel , designed for speed. The term

4018-399: The hull of a clipper, different maritime historians use different criteria to measure "sharpness", "fine lines" or "fineness", a concept which is explained by comparing a rectangular cuboid with the underwater shape of a vessel's hull. The more material one has to carve off the cuboid to achieve the hull shape, the sharper the hull. Ideally, a maritime historian would be able to look at either

4100-893: The larger SS  Great Britain on her maiden voyage. The term cutter is also used for any seaworthy vessel used in the law enforcement duties of the United Kingdom's Border Force , the United States Coast Guard (because of its descent from the Revenue Cutter Service ) or the customs services of other countries. In the United States, the early Revenue Cutter Service operated customs cutters that were commonly schooners or brigs . In Britain, they were usually rigged as defined under Sailing ( above ). The British Board of Customs also used other vessels as hulks , which were moored in places such as tidal creeks . Customs officers worked from

4182-431: The larger and later examples were generally double-banked . For transporting large numbers of men, in moderate weather conditions, a 34 ft cutter could carry a total of 66 men, a 26 ft cutter, 36 men and a 20 ft cutter, 21 men. Steam powered ship's boats saw a slow introduction to the Royal Navy from 1864. By 1877, three types were in use: steam launches, picket boats and steam cutters. However, right up to

SECTION 50

#1732798461564

4264-471: The largest boats that they could carry to maximise the amount of water collected on each trip. The standard-issue cutters from 1877 to 1900 came in 11 different lengths, ranging from 16 to 34 feet (4.9 to 10.4 m). This was cut to 5 sizes from 26 to 34 feet (7.9 to 10.4 m) in 1914. The sailing rig of the cutters used as ship's boats was usually two masted. In 1761, the larger Deal-built cutters had spritsails set on these masts, soon transitioning to

4346-476: The many clipper ships built during the mid-19th century, only two are known to survive. The only intact survivor is Cutty Sark , which was preserved as a museum ship in 1954 at Greenwich for public display. The other known survivor is City of Adelaide ; unlike Cutty Sark , she was reduced to a hulk over the years. She eventually sank at her moorings in 1991, but was raised the following year, and remained on dry land for years. Adelaide (or S.V. Carrick )

4428-512: The monsoon winds that prevailed when the first tea crop of the season was ready. These difficult sailing conditions (light and/or contrary winds) dictated the design of tea clippers. The US clippers were designed for the strong winds encountered on their route around Cape Horn. Donald McKay's Sovereign of the Seas reported the highest speed ever achieved by a sailing ship of the era, 22 knots (41 km/h), made while running her easting down to Australia in 1854. (John Griffiths' first clipper,

4510-409: The need to carry a profitable quantity of cargo. A clipper carried a large sail area and a fast hull; by the standards of any other type of sailing ship, a clipper was greatly over-canvassed. The last defining feature of a clipper, in the view of maritime historian David MacGregor, was a captain who had the courage, skill, and determination to get the fastest speed possible out of her. In assessing

4592-537: The newspapers. The last China clippers had peak speeds over 16 knots (30 km/h), but their average speeds over a whole voyage were substantially less. The joint winner of the Great Tea Race of 1866 logged about 15,800 nautical miles on a 99-day trip. This gives an average speed slightly over 6.6 knots (12.2 km/h). The key to a fast passage for a tea clipper was getting across the China Sea against

4674-473: The outer edge of the Southern Minerva Reef . They all survived having spent the night clinging to the hull and at day break saw what would be their saviour: the hull of a Japanese fishing boat, Number 10, Noshemi Maru , K30, which had been wrecked in 1960, two years earlier. In the hull of the Japanese fishing boat they built a still from which they were able to make fresh water. They found

4756-416: The population and Queen Sālote Tupou III . Cutter (ship) A cutter is any of various types of watercraft . The term can refer to the rig (sail plan) of a sailing vessel (but with regional differences in definition), to a governmental enforcement agency vessel (such as a coast guard or border force cutter), to a type of ship's boat which can be used under sail or oars, or, historically, to

4838-657: The port-to-port sailing records are held by the American clippers. The 24-hour record of the Champion of the Seas , set in 1854, was not broken until 1984 (by a multihull), or 2001 (by another monohull). The American clippers sailing from the East Coast to the California goldfields were working in a booming market. Freight rates were high everywhere in the first years of the 1850s. This started to fade in late 1853. The ports of California and Australia reported that they were overstocked with goods that had been shipped earlier in

4920-460: The purpose – mostly in India and Britain, such as the 1842-built Ariel , 100 tons OM. Some fruit schooners were bought for this trade, as were some Baltimore clippers. Among the most notable clippers were the China clippers, also called tea clippers, designed to ply the trade routes between Europe and the East Indies . The last example of these still in reasonable condition

5002-503: The registered tonnage, so can be applied to more vessels. An extreme clipper has a hull of great fineness, as judged either by the prismatic coefficient, the coefficient of underdeck tonnage, or some other technical assessment of hull shape. This term has been misapplied in the past, without reference to hull shape. As commercial vessels, these are totally reliant on speed to generate a profit for their owners, as their sharpness limits their cargo-carrying capacity. A medium clipper has

SECTION 60

#1732798461564

5084-407: The rigging details of the bowsprit taken into account – so a boat with two headsails may be classed as a sloop . Government agencies use the term "cutter" for vessels employed in patrolling their territorial waters and other enforcement activities. This terminology is derived from the sailing cutters which had this sort of role from the 18th century to the end of the 19th century. (See below.) Whilst

5166-620: The role of ceremonial Livery Barges with the canopies and armorial flags flying on special occasions. Cutters have been used for record-breaking attempts and crews have achieved record times for sculling the English Channel (2 h 42 min) in 1996 and for sculling non-stop from London to Paris (4 days 15 min) in 1999. The pilot cutter developed from the need for a fast boat to take maritime pilots from harbour to incoming large trading vessels. As most early pilots were local fisherman who undertook both jobs, although licensed by

5248-419: The same Sunderland landed in the lagoon and rescued the ten survivors (of whom five were by now bedridden) and one body, departing Minerva at 3:30 p.m. and reaching Suva by dark. The Tongans were taken to Suva's Colonial War Memorial Hospital, but the only real health issues were dehydration and, for one, the onset of tuberculosis . They were then taken to Nuku'alofa, where they were welcomed and acclaimed by

5330-429: The stemhead), a jib , set flying to a traveller on the bowsprit and, in most cases, a flying jib (alternatively termed a jib-topsail) also set flying, but to a higher point on the mast. A cutter has a running bowsprit, which can be brought inboard when not needed, such as in rough weather or in harbour. The bowsprit was usually of great length, sometimes longer than the hull. The standard fair weather sails consisted of

5412-480: The tea ports of China. A typical passage time back to London for a steamer was 58 days, while the fastest clippers could occasionally make the trip in less than 100 days; the average was 123 days in the 1867–68 tea season. The freight rate for a steamer in 1871 was roughly double that paid to a sailing vessel. Some clipper owners were severely caught out by this; several extreme clippers had been launched in 1869, including Cutty Sark , Norman Court and Caliph . Of

5494-464: The term "main mast". A variation on this rig, seen for example in 1887, was to have two dipping lugs. The number of oars pulled varied with the size of the boat. A schedule of ship's boats of 1886 shows 34 to 30 feet (10.4 to 9.1 m) cutters pulling 12 oars, 28 feet (8.5 m), 10 oars, 26 to 20 feet (7.9 to 6.1 m), 8 oars and the two smallest sizes of 18 and 16 feet (5.5 and 4.9 m), 6 oars. The smaller boats could be single banked whilst

5576-483: The term in 1830. British newspaper usage of the term can be found as early as 1832 and in shipping advertisements from 1835. A US court case of 1834 has evidence that discusses a clipper being faster than a brig. A clipper is a sailing vessel designed for speed, a priority that takes precedence over cargo-carrying capacity or building or operating costs. It is not restricted to any one rig (while many were fully rigged ships, others were barques, brigs, or schooners), nor

5658-525: The time meant "to run or fly swiftly". The first application of the term "clipper", in a nautical sense, is likewise uncertain. The type known as the Baltimore clipper originated at the end of the 18th century on the eastern seaboard of the USA. At first, these fast sailing vessels were referred to as "Virginia-built" or "pilot-boat model", with the name "Baltimore-built" appearing during the War of 1812 . In

5740-580: The time of the First World War, the majority of the boats in use continued to be propelled solely by sail and oar. The Royal Navy still has some cutters that can be worked under sail or oar. In the simpler definition, the sailing rig called "cutter" has a single mast with fore and aft sails which include more than one headsail . The mainsail (set abaft, or behind the mast) could be gaff , Bermuda , standing lug or gunter rigged. A more complex definition may be applied in American waters, where

5822-476: The water out. The alternative, if the correct geometry for an efficient rowing position was adopted, was to position the thwarts awkwardly high. Like some other types of ship's boats used in the Royal Navy, the cutter appears to have originated in Deal . Some Navy Board correspondence of 1712 concerns disapproval of the captain of HMS  Rochester for buying a cutter of about 20 feet (6.1 m) in length as

5904-759: The year. This gave an accelerating fall in freight rates that was halted, however, by the start of the Crimean War in March 1854, as many ships were now being chartered by the French and British governments. The end of the Crimean War in April 1856 released all this capacity back on the world shipping markets – the result being a severe slump. The next year had the Panic of 1857 , with effects on both sides of

5986-499: Was also retrospectively applied to the Baltimore clipper , which originated in the late 18th century. Clippers were generally narrow for their length, small by later 19th-century standards, could carry limited bulk freight, and had a large total sail area. "Clipper" does not refer to a specific sailplan ; clippers may be schooners , brigs , brigantines , etc., as well as full-rigged ships . Clippers were mostly constructed in British and American shipyards , although France, Brazil,

6068-445: Was built like her, but she may have suggested the clipper design in vessels of ship rig. She did, however, influence the building of Rainbow in 1845, the first extreme clipper ship. In Aberdeen , Scotland, shipbuilders Alexander Hall and Sons developed the "Aberdeen" clipper bow in the late 1830s; the first was Scottish Maid launched in 1839. Scottish Maid , 150 tons OM, was the first British clipper ship. " Scottish Maid

6150-525: Was intended for the Aberdeen-London trade, where speed was crucial to compete with steamships. The Hall brothers tested various hulls in a water tank and found the clipper design most effective. The design was influenced by tonnage regulations. Tonnage measured a ship's cargo capacity and was used to calculate tax and harbour dues. The new 1836 regulations measured depth and breadth with length measured at half midship depth. Extra length above this level

6232-466: Was launched in an American shipyard after the end of 1854 and only a few medium clippers after 1860. By contrast, British trade recovered well at the end of the 1850s. Tea clippers had continued to be launched during the depressed years, apparently little affected by the economic downturn. The long-distance route to China was not realistically challenged by steamships in the early part of the 1860s. No true steamer (as opposed to an auxiliary steamship) had

6314-505: Was perpetuated by the term "cutter brig" which was used over the period circa 1781–1807 for those rigged as brigs. "Cutter built" was a description applied to a hull of this type and designed for speed. More generally, the unmodified word "cutter" soon became associated with a single-masted rig. Fast vessels were often used for illegal purposes, such as smuggling, or by the authorities trying to prevent this illegality. Therefore, cutters were used for both. The Royal Navy bought and had built

6396-717: Was tax-free and became a feature of clippers. Scottish Maid proved swift and reliable and the design was widely copied." The earliest British clipper ships were built for trade within the British Isles ( Scottish Maid was built for the Aberdeen to London trade ). Then followed the vast clipper trade of tea, opium, spices, and other goods from the Far East to Europe, and the ships became known as "tea clippers". From 1839, larger American clipper ships started to be built beginning with Akbar , 650 tons OM, in 1839, and including

6478-593: Was the medium clipper Andrew Jackson  – an unresolvable argument exists over timing these voyages "from pilot to pilot"). Flying Cloud was the most famous of the clippers built by Donald McKay . She was known for her extremely close race with the Hornet in 1853; for having a woman navigator, Eleanor Creesy , wife of Josiah Perkins Creesy, who skippered the Flying Cloud on two record-setting voyages from New York to San Francisco; and for sailing in

6560-495: Was the number of crew needed to handle the large gaff mainsail with its long boom. Larger cutters purchased by the Royal Navy were sometimes converted to brigs to make them easier to handle, but still utilising the fast hull. At about the same time that the decked, fast-sailing cutters of the 18th century appeared, the term was also applied to a new class of ship's boat . These were clinker-built open boats, optimised for sailing but capable under oars. They had finer lines than

6642-447: Was the term restricted to any one hull type. Howard Chapelle lists three basic hull types for clippers. The first was characterised by the sharp deadrise and ends found in the Baltimore clipper. The second was a hull with a full midsection and modest deadrise, but sharp ends – this was a development of the hull form of transatlantic packets. The third was more experimental, with deadrise and sharpness being balanced against

6724-619: Was to combine large stowage capacity with good sailing qualities." Antelope was relatively flat-floored and had only an 8-inch deadrise at half-floor. The medium clipper, though still very fast, could carry more cargo. After 1854, extreme clippers were replaced in American shipbuilding yards by medium clippers. The Flying Cloud was a clipper ship built in 1851 that established the fastest passage between New York and San Francisco within weeks of her launching, then broke her own records three years later, which stood at 89 days 8 hours until 1989. (The other contender for this "blue ribbon" title

#563436