Misplaced Pages

#354645

63-458: The airport received permission to build 11 new hangars in October 2023. Tullahoma Regional Airport covers an area of 594 acres (240 ha ) at an elevation of 1,084 feet (330 m) above mean sea level . It has three runways : 6/24 is 5,501 by 150 feet (1,677 x 46 m) and 18/36 is 5,002 by 100 feet (1,525 x 30 m), both with asphalt / concrete surfaces; 9/27 is 2,693 by 100 feet (821 x 30 m) with

126-473: A turf surface. For the 12-month period ending April 8, 2009, the airport had 30,400 aircraft operations, an average of 83 per day: 97% general aviation , 2% air taxi , and 1% military . At that time there were 123 aircraft based at this airport: 84% single- engine , 12% multi-engine, 2% jet , and 2% helicopter . The Beechcraft Heritage Museum is Located on the south side of the airport. Acre The acre ( / ˈ eɪ k ər / AY -kər )

189-416: A certain landowner might have been said to own 32,000 acres of land, not 50 square miles of land. The acre is related to the square mile, with 640 acres making up one square mile. One mile is 5280 feet (1760 yards). In western Canada and the western United States, divisions of land area were typically based on the square mile, and fractions thereof. If the square mile is divided into quarters, each quarter has

252-474: A circumference divisible as a whole number into ten long feet. The measures of Iron Age Britain are uncertain and proposed reconstructions such as the Megalithic Yard are controversial. Later Welsh legend credited Dyfnwal Moelmud with the establishment of their units , including a foot of 9 inches. The Belgic or North German foot of 335 mm (13.2 in) was introduced to England either by

315-774: A few it continues as a statute measure . These include Antigua and Barbuda, American Samoa , The Bahamas , Belize, the British Virgin Islands , Canada , the Cayman Islands , Dominica , the Falkland Islands , Grenada , Ghana , Guam , the Northern Mariana Islands , Jamaica , Montserrat , Samoa , Saint Lucia , St. Helena , St. Kitts and Nevis , St. Vincent and the Grenadines , Turks and Caicos ,

378-429: A length of ⁠ 1 / 600 ⁠ of a stadion , one stadion being about 181.2 m (594 ft); therefore a foot was, at the time, about 302 mm (11.9 in). Its exact size varied from city to city and could range between 270 mm (10.6 in) and 350 mm (13.8 in), but lengths used for temple construction appear to have been about 295 mm (11.6 in) to 325 mm (12.8 in);

441-637: A measurement of the previous Indian standard of the yard. However, it is now obsolete as the current National Topographic Database of the Survey of India is based on the metric WGS-84 datum , which is also used by the Global Positioning System . An ISO 2848 measure of 3 basic modules (30 cm) is called a " metric foot ", but there were earlier distinct definitions of a metric foot during metrication in France and Germany. In 1799

504-569: A primary unit for trade in the United Kingdom ceased to be permitted from 1 October 1995, due to the 1994 amendment of the Weights and Measures Act , where it was replaced by the hectare  – though its use as a supplementary unit continues to be permitted indefinitely. This was with the exemption of Land registration , which records the sale and possession of land, in 2010 HM Land Registry ended its exemption. The measure

567-474: A side length of 1 ⁄ 2 mile (880 yards) and is 1 ⁄ 4 square mile in area, or 160 acres. These subunits are typically then again divided into quarters, with each side being 1 ⁄ 4 mile long, and being 1 ⁄ 16 of a square mile in area, or 40 acres. In the United States, farmland was typically divided as such, and the phrase "the back 40" refers to the 40-acre parcel to

630-462: A side. As a unit of measure, an acre has no prescribed shape; any area of 43,560 square feet is an acre. In the international yard and pound agreement of 1959, the United States and five countries of the Commonwealth of Nations defined the international yard to be exactly 0.9144 metre. The US authorities decided that, while the refined definition would apply nationally in all other respects,

693-456: A small parcel, but becomes significant for mapping, or when the state plane coordinate system (SPCS) is used in the US, because the origin of the system may be hundreds of thousands of feet (hundreds of miles) from the point of interest. Hence the previous definitions continued to be used for surveying in the United States and India for many years, and are denoted survey feet to distinguish them from

SECTION 10

#1732798567355

756-573: A yard are used (see survey foot and survey yard ), so the exact size of an acre depends upon the yard upon which it is based. The US survey acre is about 4,046.872 square metres; its exact value ( ⁠4046 + 13,525,426 / 15,499,969 ⁠  m ) is based on an inch defined by 1 metre = 39.37 inches exactly, as established by the Mendenhall Order of 1893. Surveyors in the United States use both international and survey feet, and consequently, both varieties of acre. Since

819-449: Is feet . However, the singular form may be used like a plural when it is preceded by a number, as in "he is six foot tall." Historically, the human body has been used to provide the basis for units of length. The foot of an adult European-American male is typically about 15.3% of his height, giving a person of 175 cm (5 ft 9 in) a foot-length of about 268 mm (10.6 in), on average. Archaeologists believe that, in

882-632: Is a unit of land area used in the British imperial and the United States customary systems. It is traditionally defined as the area of one chain by one furlong (66 by 660 feet ), which is exactly equal to 10 square chains, 1 ⁄ 640 of a square mile, 4,840 square yards, or 43,560 square feet, and approximately 4,047 m , or about 40% of a hectare . Based upon the international yard and pound agreement of 1959 , an acre may be declared as exactly 4,046.8564224 square metres . The acre

945-415: Is based upon calculations from surveys of Phase 1 elements at Stonehenge . They found that the underlying diameters of the stone circles had been consistently laid out using multiples of a base unit amounting to 30 long feet , which they calculated to be 1.056 of a modern international foot (thus 12.672 inches or 0.3219 m). Furthermore, this unit is identifiable in the dimensions of some stone lintels at

1008-684: Is derived from the Norman , attested for the first time in a text of Fécamp in 1006 to the meaning of «agrarian measure». Acre dates back to the old Scandinavian akr “cultivated field, ploughed land” which is perpetuated in Icelandic and the Faroese akur “field (wheat)”, Norwegian and Swedish åker , Danish ager “field”, cognate with German Acker , Dutch akker , Latin ager , Sanskrit ajr , and Greek αγρός ( agros ). In English, an obsolete variant spelling

1071-415: Is measured in acres. In Sri Lanka , the division of an acre into 160  perches or 4  roods is common. In Pakistan, residential plots are measured in kanal (20 marla = 1  kanal = 605 sq yards) and open/agriculture land measurement is in acres (8 kanal = 1 acre) and muraba (25 acres = 1 muraba = 200 kanal ), jerib , wiswa and gunta . Its use as

1134-418: Is not used for land registration . One acre equals 1 ⁄ 640 (0.0015625) square mile, 4,840 square yards, 43,560 square feet, or about 4,047 square metres (0.4047 hectares ) (see below). While all modern variants of the acre contain 4,840 square yards, there are alternative definitions of a yard, so the exact size of an acre depends upon the particular yard on which it is based. Originally, an acre

1197-467: Is of no practical significance given the precision of normal surveying measurements over short distances (usually much less than a mile). Out of 50 states and six other jurisdictions, 40 have legislated that surveying measures should be based on the US survey foot, six have legislated that they be made on the basis of the international foot, and ten have not specified. The Indian survey foot is defined as exactly 0.304 7996  m , presumably derived from

1260-507: Is sometimes abbreviated ac but is usually spelled out as the word "acre". Traditionally, in the Middle Ages , an acre was conceived of as the area of land that could be ploughed by one man using a team of eight oxen in one day. The acre is still a statutory measure in the United States. Both the international acre and the US survey acre are in use, but they differ by only four parts per million (see below). The most common use of

1323-494: Is still used to communicate with the public and informally (non-contract) by the farming and property industries. 1 international acre is equal to the following metric units: 1 United States survey acre is equal to: 1 acre (both variants) is equal to the following customary units: Perhaps the easiest way for US residents to envision an acre is as a rectangle measuring 88 yards by 55 yards ( 1 ⁄ 10 of 880 yards by 1 ⁄ 16 of 880 yards), about 9 ⁄ 10

SECTION 20

#1732798567355

1386-421: Is the only industrialized country that uses the (international) foot in preference to the meter in its commercial, engineering, and standards activities. The foot is legally recognized in the United Kingdom; road distance signs must use imperial units (however, distances on road signs are always marked in miles or yards, not feet; bridge clearances are given in meters as well as feet and inches), while its usage

1449-644: Is widespread among the British public as a measurement of height. The foot is recognized as an alternative expression of length in Canada. Both the UK and Canada have partially metricated their units of measurement. The measurement of altitude in international aviation (the flight level unit) is one of the few areas where the foot is used outside the English-speaking world. The most common plural of foot

1512-485: The toise and in particular the toise de l'Écritoire , the distance between the fingertips of the outstretched arms of a man. The toise has 6 pieds (feet) each of 326.6 mm (12.9 in). He was unsuccessful in introducing a standard unit of length throughout his realm: an analysis of the measurements of Charlieu Abbey shows that during the 9th century the Roman foot of 296.1 mm (11.66 in)

1575-815: The Belgic Celts during their invasions prior to the Romans or by the Anglo-Saxons in the 5th and 6th century. Roman units were introduced following their invasion in AD ;43. Following the Roman withdrawal and Saxon invasions , the Roman foot continued to be used in the construction crafts while the Belgic foot was used for land measurement. Both the Welsh and Belgic feet seem to have been based on multiples of

1638-527: The British Standards Institution 's adoption of a scientific standard inch of 25.4 millimeters in 1930. The IEEE standard symbol for a foot is "ft". In some cases, the foot is denoted by a prime , often approximated by an apostrophe , and the inch by a double prime; for example, 2   feet 4 inches is sometimes denoted 2′   4″. In Imperial units , the foot was defined as ⁠ 1 / 3 ⁠  yard, with

1701-682: The Confederation of the Rhine was founded and three different reformed feet were defined, all of which were based on the metric system: Prior to the introduction of the metric system, many European cities and countries used the foot, but it varied considerably in length: the voet in Ypres , Belgium, was 273.8 millimeters (10.78   in) while the piede in Venice was 347.73 millimeters (13.690   in). Lists of conversion factors between

1764-539: The National Institute of Standards and Technology announced their joint intent to end the "temporary" continuance of the US survey foot, mile, and acre units (as permitted by their 1959 decision, above), with effect from the end of 2022. The Puerto Rican cuerda (0.39 ha; 0.97 acres) is sometimes called the "Spanish acre" in the continental United States. The acre is commonly used in many current and former Commonwealth countries by custom, and in

1827-635: The National Institute of Standards and Technology , the National Geodetic Survey , and the United States Department of Commerce deprecated use of the US survey foot and recommended conversion to either the meter or the international foot (0.3048 m). However, the historic relevance of the US survey foot persists, as the Federal Register notes: The date of December 31, 2022, was selected to accompany

1890-499: The US survey foot (and thus the survey acre) would continue 'until such a time as it becomes desirable and expedient to readjust [it]'. By inference, an "international acre" may be calculated as exactly 4,046.856 422 4 square metres but it does not have a basis in any international agreement. Both the international acre and the US survey acre contain 1 ⁄ 640 of a square mile or 4,840 square yards, but alternative definitions of

1953-517: The barleycorn , but by as early as 950 the English kings seem to have (ineffectually) ordered measures to be based upon an iron yardstick at Winchester and then London . Henry I was said to have ordered a new standard to be based upon the length of his own arm and, by the c.  1300 Act concerning the Composition of Yards and Perches traditionally credited to Edward I or II ,

Tullahoma Regional Airport - Misplaced Pages Continue

2016-574: The Balkans, Norway , and Denmark , where it was equal to about two-thirds acre (2,700 m ). Statutory values for the acre were enacted in England, and subsequently the United Kingdom, by acts of: Historically, the size of farms and landed estates in the United Kingdom was usually expressed in acres (or acres, roods , and perches ), even if the number of acres was so large that it might conveniently have been expressed in square miles. For example,

2079-454: The City of London and Westminster , which codified the statute mile as comprising 5,280 feet. The differences among the various physical standard yards around the world, revealed by increasingly powerful microscopes , eventually led to the 1959 adoption of the international foot defined in terms of the meter. The international yard and pound agreement of July 1959 defined the length of

2142-542: The Greeks and the Romans subdivided the foot into 16 digits , but in later years, the Romans also subdivided the foot into 12 unciae (from which both the English words "inch" and " ounce " are derived). After the fall of the Roman Empire, some Roman traditions were continued but others fell into disuse. In AD 790 Charlemagne attempted to reform the units of measure in his domains. His units of length were based on

2205-468: The NSRS where it is used now and in the past [emphasis added]. In other words, to minimize disruption in the use of U.S. survey foot for existing NSRS coordinate systems, the change will apply only to the modernized NSRS. State legislation is also important for determining the conversion factor to be used for everyday land surveying and real estate transactions, although the difference (two parts per million )

2268-701: The Paris arpent used in Quebec before the metric system was adopted is sometimes called "French acre" in English, even though the Paris arpent and the Normandy acre were two very different units of area in ancient France (the Paris arpent became the unit of area of French Canada, whereas the Normandy acre was never used in French Canada). In Germany, the Netherlands, and Eastern Europe

2331-404: The U.S. Impacts related to the change to international feet will be minimized if a transition occurs concurrently with others [ sic ] changes in the NSRS. ... The difference in timelines will have no effect on users of the existing NSRS (National Spatial Reference System), because NGS ( NOAA 's National Geodetic Survey) will continue to support the U.S. survey foot for components of

2394-573: The United Kingdom, the United States and the US Virgin Islands . In the Republic of Ireland , the hectare is legally used under European units of measurement directives ; however, the acre (the same standard statute as used in the UK, not the old Irish acre , which was of a different size) is still widely used, especially in agriculture. In India, residential plots are measured in square feet or square metre, while agricultural land

2457-474: The acre is to measure tracts of land. The acre is used in many established and former Commonwealth of Nations countries by custom. In a few, it continues as a statute measure , although not since 2010 in the UK, and not for decades in Australia , New Zealand , and South Africa . In many places where it is not a statute measure, it is still lawful to "use for trade" if given as supplementary information and

2520-662: The back of the farm. Most of the Canadian Prairie Provinces and the US Midwest are on square-mile grids for surveying purposes. US survey foot The foot (standard symbol: ft ) is a unit of length in the British imperial and United States customary systems of measurement . The prime symbol , ′ , is commonly used to represent the foot. In both customary and imperial units, one foot comprises 12  inches , and one yard comprises three feet. Since an international agreement in 1959 ,

2583-497: The difference between the US survey acre and international acre (0.016 square metres, 160 square centimetres or 24.8 square inches), is only about a quarter of the size of an A4 sheet or US letter , it is usually not important which one is being discussed. Areas are seldom measured with sufficient accuracy for the different definitions to be detectable. In October 2019, the US National Geodetic Survey and

Tullahoma Regional Airport - Misplaced Pages Continue

2646-465: The door of a church on a Sunday and bid 16 men to stop, tall ones and small ones, as they happen to pass out when the service is finished; then make them put their left feet one behind the other, and the length thus obtained shall be a right and lawful rood to measure and survey the land with, and the 16th part of it shall be the right and lawful foot. The Neolithic long foot , first proposed by archeologists Mike Parker Pearson and Andrew Chamberlain,

2709-486: The farmers (still in the 20th century) made the difference between the grande acre (68 ares, 66 centiares) and the petite acre (56 to 65 ca). The Normandy acre was usually divided in 4 vergées ( roods ) and 160 square perches , like the English acre. The Normandy acre was equal to 1.6 arpents , the unit of area more commonly used in Northern France outside of Normandy. In Canada,

2772-518: The foot is defined as equal to exactly 0.3048 meters. Historically, the "foot" was a part of many local systems of units, including the Greek , Roman , Chinese , French , and English systems. It varied in length from country to country, from city to city, and sometimes from trade to trade. Its length was usually between 250 mm and 335 mm and was generally, but not always, subdivided into 12 inches or 16  digits . The United States

2835-425: The former was close to the size of the Roman foot. The standard Roman foot ( pes ) was normally about 295.7 mm (11.6 in) (97% of today's measurement), but in some provinces, particularly Germania Inferior , the so-called pes Drusianus (foot of Nero Claudius Drusus ) was sometimes used, with a length of about 334 mm (13.1 in). (In reality, this foot predated Drusus.) Originally both

2898-457: The international foot. The United Kingdom was unaffected by this problem, as the retriangulation of Great Britain (1936–62) had been done in meters. In the United States, the foot was defined as 12 inches, with the inch being defined by the Mendenhall Order of 1893 via 39.37 inches = 1 m (making a US foot exactly ⁠ 1200 / 3937 ⁠   meters, approximately 0.304 800 61  m ). On December 31, 2022,

2961-456: The international yard for all purposes through the Weights and Measures Act 1963 , effective January 1, 1964. When the international foot was defined in 1959, a great deal of survey data was already available based on the former definitions, especially in the United States and in India . The small difference between the survey foot and the international foot would not be detectable on a survey of

3024-455: The international yard in the United States and countries of the Commonwealth of Nations as exactly 0.9144 meters . Consequently, since a foot is one third of a yard, the international foot is defined to be equal to exactly 0.3048 meters. This was 2  ppm shorter than the previous US definition and 1.7 ppm longer than the previous British definition. The 1959 agreement concluded a series of step-by-step events, set off in particular by

3087-466: The meter became the official unit of length in France . This was not fully enforced, and in 1812 Napoleon introduced the system of mesures usuelles which restored the traditional French measurements in the retail trade, but redefined them in terms of metric units. The foot, or pied métrique , was defined as one third of a meter. This unit continued in use until 1837. In southwestern Germany in 1806,

3150-497: The modernization of the National Spatial Reference System (NSRS) by NOAA 's National Geodetic Survey (NGS). The reason for associating the deprecation of the U.S. survey foot with the modernization of the NSRS is that the biggest impact of the uniform adoption of the international foot will be for users of the NSRS, due to very large coordinate values currently given in U.S. survey feet in many areas of

3213-631: The past, the people of Egypt , India , and Mesopotamia preferred the cubit , while the people of Rome , Greece , and China preferred the foot. Under the Harappan linear measures, Indus cities during the Bronze Age used a foot of 13.2 inches (335 mm) and a cubit of 20.8 inches (528 mm). The Egyptian equivalent of the foot—a measure of four palms or 16 digits—was known as the djeser and has been reconstructed as about 30 cm (11.8 in). The Greek foot ( πούς , pous ) had

SECTION 50

#1732798567355

3276-522: The site and in the diameter of the "southern circle" at nearby Durrington Walls . Evidence that this unit was in widespread use across southern Britain is available from the Folkton Drums from Yorkshire ( neolithic artifacts, made from chalk, with circumferences that exactly divide as integers into ten long feet) and a similar object, the Lavant drum , excavated at Lavant , Sussex, again with

3339-406: The size of a standard American football field . To be more exact, one acre is 90.75% of a 100-yd-long by 53.33-yd-wide American football field (without the end zone ). The full field, including the end zones, covers about 1.32 acres (0.53 ha). For residents of other countries, the acre might be envisioned as rather more than half of a 1.76 acres (0.71 ha) football pitch . The word acre

3402-413: The statute foot was a different measure, exactly ⁠ 10 / 11 ⁠ of the old (Belgic) foot. The barleycorn , inch , ell , and yard were likewise shrunk, while rods and furlongs remained the same. The ambiguity over the state of the mile was resolved by the 1593 Act against Converting of Great Houses into Several Tenements and for Restraint of Inmates and Inclosures in and near about

3465-466: The traditional unit of area was Morgen . Like the acre, the morgen was a unit of ploughland, representing a strip that could be ploughed by one man and an ox or horse in a morning. There were many variants of the morgen , differing between the different German territories, ranging from 1 ⁄ 2 to 2 + 1 ⁄ 2 acres (2,000 to 10,100 m ). It was also used in Old Prussia , in

3528-488: The traditional unit of area was the arpent carré , a measure based on the Roman system of land measurement. The acre was used only in Normandy (and neighbouring places outside its traditional borders), but its value varied greatly across Normandy, ranging from 3,632 to 9,725 square metres, with 8,172 square metres being the most frequent value. But inside the same pays of Normandy, for instance in pays de Caux ,

3591-408: The various feet in this list ceased to be used when the countries adopted the metric system. The Netherlands and modern Belgium adopted the metric system in 1817, having used the mesures usuelles under Napoleon and the newly formed German Empire adopted the metric system in 1871. The palm (typically 200–280 mm, ie. 7 ⁠ 7 / 8 ⁠ to 11 ⁠ 1 / 32 ⁠ inches)

3654-603: The various units of measure were given in many European reference works including: Many of these standards were peculiar to a particular city, especially in Germany (which, before German unification in 1871, consisted of many kingdoms, principalities, free cities and so on). In many cases the length of the unit was not uniquely fixed: for example, the English foot was stated as 11 pouces 2.6 lignes ( French inches and lines ) by Picard , 11 pouces 3.11 lignes by Maskelyne , and 11 pouces 3 lignes by D'Alembert . Most of

3717-514: The yard being realized as a physical standard (separate from the standard meter). The yard standards of the different Commonwealth countries were periodically compared with one another. The value of the United Kingdom primary standard of the yard was determined in terms of the meter by the National Physical Laboratory in 1964 to be 0.914 3969  m , implying a pre-1959 UK foot of 0.304 7990  m . The UK adopted

3780-585: Was aker . According to the Act on the Composition of Yards and Perches , dating from around 1300, an acre is "40 perches [ rods ] in length and four in breadth", meaning 220 yards by 22 yards. As detailed in the diagram, an acre was roughly the amount of land tillable by a yoke of oxen in one day. Before the enactment of the metric system , many countries in Europe used their own official acres. In France,

3843-401: Was understood as a strip of land sized at forty perches (660 ft, or 1  furlong ) long and four perches (66 ft) wide; this may have also been understood as an approximation of the amount of land a yoke of oxen could plough in one day (a furlong being "a furrow long"). A square enclosing one acre is approximately 69.57 yards, or 208 feet 9 inches (63.61 metres), on

SECTION 60

#1732798567355

3906-1398: Was used in many Mediterranean cities instead of the foot. Horace Doursther, whose reference was published in Belgium which had the smallest foot measurements, grouped both units together, while J. F. G. Palaiseau devoted three chapters to units of length: one for linear measures (palms and feet); one for cloth measures (ells); and one for distances traveled (miles and leagues). In Belgium, the words pied (French) and voet (Dutch) would have been used interchangeably. International Standards Organisation (ISO)-defined intermodal containers for efficient global freight/cargo shipping, were defined using feet rather than meters for their leading outside (corner) dimensions. All ISO-standard containers to this day are eight feet wide, and their outer heights and lengths are also primarily defined in, or derived from feet. Quantities of global shipping containers are still primarily counted in Twenty-foot Equivalent Units , or TEUs. Everyday global (civilian) air traffic / aviation continues to be controlled in flight levels (flying altitudes) separated by thousands of feet (although typically read out in hundreds – e.g. flight level 330 actually means 33,000 feet, or about 10 kilometres in altitude). The length of

3969-467: Was used; when it was rebuilt in the 10th century, a foot of about 320 mm (12.6 in) was used. At the same time, monastic buildings used the Carolingian foot of 340 mm (13.4 in). The procedure for verification of the foot as described in the 16th century posthumously published work by Jacob Köbel in his book Geometrei. Von künstlichem Feldmessen und absehen is: Stand at

#354645