Electronics is a scientific and engineering discipline that studies and applies the principles of physics to design, create, and operate devices that manipulate electrons and other electrically charged particles . It is a subfield of physics and electrical engineering which uses active devices such as transistors , diodes , and integrated circuits to control and amplify the flow of electric current and to convert it from one form to another, such as from alternating current (AC) to direct current (DC) or from analog signals to digital signals.
77-506: Video is an electronic medium for the recording, copying , playback, broadcasting , and display of moving visual media . Video was first developed for mechanical television systems, which were quickly replaced by cathode-ray tube (CRT) systems, which, in turn, were replaced by flat-panel displays of several types. Video systems vary in display resolution , aspect ratio , refresh rate , color capabilities, and other qualities. Analog and digital variants exist and can be carried on
154-432: A mass-production basis, which limited them to a number of specialised applications. The MOSFET was invented at Bell Labs between 1955 and 1960. It was the first truly compact transistor that could be miniaturised and mass-produced for a wide range of uses. Its advantages include high scalability , affordability, low power consumption, and high density . It revolutionized the electronics industry , becoming
231-403: A radio antenna , practicable. Vacuum tubes (thermionic valves) were the first active electronic components which controlled current flow by influencing the flow of individual electrons , and enabled the construction of equipment that used current amplification and rectification to give us radio , television , radar , long-distance telephony and much more. The early growth of electronics
308-459: A closed-circuit system as an analog signal. Broadcast or studio cameras use a single or dual coaxial cable system using serial digital interface (SDI). See List of video connectors for information about physical connectors and related signal standards. Video may be transported over networks and other shared digital communications links using, for instance, MPEG transport stream , SMPTE 2022 and SMPTE 2110 . Digital television broadcasts use
385-831: A display artifact appearing on legacy black-and-white displays, showing up on highly-color-saturated surfaces. It was found that by lowering the frame rate by 0.1%, the undesirable effect was minimized. As of 2021 , video transmission standards in North America, Japan, and South Korea are still based on 60 / 1.001 ≈ 59.94 images per second. Two sizes of images are typically used: 1920×1080 ("1080i/p") and 1280×720 ("720p"). Confusingly, interlaced formats are customarily stated at 1/2 their image rate, 29.97/25 FPS, and double their image height, but these statements are purely custom; in each format, 60 images per second are produced. A resolution of 1080i produces 59.94 or 50 1920×540 images, each squashed to half-height in
462-418: A leading role in the field of microwave and high power transmission as well as television receivers until the middle of the 1980s. Since then, solid-state devices have all but completely taken over. Vacuum tubes are still used in some specialist applications such as high power RF amplifiers , cathode-ray tubes , specialist audio equipment, guitar amplifiers and some microwave devices . In April 1955,
539-566: A mix of the two types. Analog circuits are becoming less common, as many of their functions are being digitized. Analog circuits use a continuous range of voltage or current for signal processing, as opposed to the discrete levels used in digital circuits. Analog circuits were common throughout an electronic device in the early years in devices such as radio receivers and transmitters. Analog electronic computers were valuable for solving problems with continuous variables until digital processing advanced. As semiconductor technology developed, many of
616-431: A natively progressive broadcast or recorded signal, the result is the optimum spatial resolution of both the stationary and moving parts of the image. Interlacing was invented as a way to reduce flicker in early mechanical and CRT video displays without increasing the number of complete frames per second . Interlacing retains detail while requiring lower bandwidth compared to progressive scanning. In interlaced video,
693-442: A number is available. Analog video is a video signal represented by one or more analog signals . Analog color video signals include luminance (Y) and chrominance (C). When combined into one channel, as is the case among others with NTSC , PAL , and SECAM , it is called composite video . Analog video may be carried in separate channels, as in two-channel S-Video (YC) and multi-channel component video formats. Analog video
770-438: A particular refresh rate, display resolution , and color space . Many analog and digital recording formats are in use, and digital video clips can also be stored on a computer file system as files, which have their own formats. In addition to the physical format used by the data storage device or transmission medium, the stream of ones and zeros that is sent must be in a particular digital video coding format , for which
847-423: A perceived duration of between 100 ms and 400 ms. Multiple stimuli that are very short are sometimes perceived as a single stimulus, such as a 10 ms green flash of light immediately followed by a 10 ms red flash of light perceived as a single yellow flash of light. Early silent films had stated frame rates anywhere from 16 to 24 frames per second (fps), but since the cameras were hand-cranked,
SECTION 10
#1732773200013924-540: A physical space, although in more recent years the trend has been towards electronics lab simulation software , such as CircuitLogix , Multisim , and PSpice . Today's electronics engineers have the ability to design circuits using premanufactured building blocks such as power supplies , semiconductors (i.e. semiconductor devices, such as transistors), and integrated circuits. Electronic design automation software programs include schematic capture programs and printed circuit board design programs. Popular names in
1001-471: A quick movement, it is usually necessary to revert to animating "on ones", as "twos" are too slow to convey the motion adequately. A blend of the two techniques keeps the eye fooled without unnecessary production cost. Animation for most " Saturday morning cartoons " was produced as cheaply as possible and was most often shot on "threes" or even "fours", i.e. three or four frames per drawing. This translates to only 8 or 6 drawings per second respectively. Anime
1078-510: A ratio between width and height. The ratio of width to height for a traditional television screen is 4:3, or about 1.33:1. High-definition televisions use an aspect ratio of 16:9, or about 1.78:1. The aspect ratio of a full 35 mm film frame with soundtrack (also known as the Academy ratio ) is 1.375:1. Pixels on computer monitors are usually square, but pixels used in digital video often have non-square aspect ratios, such as those used in
1155-403: A sequence of miniature photographic images visible to the eye when the film is physically examined. Video, by contrast, encodes images electronically, turning the images into analog or digital electronic signals for transmission or recording. Video technology was first developed for mechanical television systems, which were quickly replaced by cathode-ray tube (CRT) television systems. Video
1232-590: A variety of media, including radio broadcasts , magnetic tape , optical discs , computer files , and network streaming . The word video comes from the Latin video (I see). Video developed from facsimile systems developed in the mid-19th century. Early mechanical video scanners, such as the Nipkow disk , were patented as early as 1884, however, it took several decades before practical video systems could be developed, many decades after film . Film records using
1309-506: Is also usually drawn on threes or twos. Due to the mains frequency of electric grids, analog television broadcast was developed with frame rates of 50 Hz (most of the world) or 60 Hz (Canada, US, Mexico, Philippines, Japan, South Korea). The frequency of the electricity grid was extremely stable and therefore it was logical to use for synchronization. The introduction of color television technology made it necessary to lower that 60 FPS frequency by 0.1% to avoid " dot crawl ",
1386-548: Is defined as unwanted disturbances superposed on a useful signal that tend to obscure its information content. Noise is not the same as signal distortion caused by a circuit. Noise is associated with all electronic circuits. Noise may be electromagnetically or thermally generated, which can be decreased by lowering the operating temperature of the circuit. Other types of noise, such as shot noise cannot be removed as they are due to limitations in physical properties. Many different methods of connecting components have been used over
1463-400: Is flashed on screen three times. In drawn animation , moving characters are often shot "on twos", that is to say, one drawing is shown for every two frames of film (which usually runs at 24 frame per second), meaning there are only 12 drawings per second. Even though the image update rate is low, the fluidity is satisfactory for most subjects. However, when a character is required to perform
1540-450: Is in rough chronological order. All formats listed were sold to and used by broadcasters, video producers, or consumers; or were important historically. Digital video tape recorders offered improved quality compared to analog recorders. Optical storage mediums offered an alternative, especially in consumer applications, to bulky tape formats. A video codec is software or hardware that compresses and decompresses digital video . In
1617-474: Is known as the flicker fusion threshold . However, when the modulated light is non-uniform and contains an image, the flicker fusion threshold can be much higher, in the hundreds of hertz. With regard to image recognition , people have been found to recognize a specific image in an unbroken series of different images, each of which lasts as little as 13 milliseconds. Persistence of vision sometimes accounts for very short single-millisecond visual stimulus having
SECTION 20
#17327732000131694-455: Is less sensitive to details in color than brightness, the luminance data for all pixels is maintained, while the chrominance data is averaged for a number of pixels in a block, and the same value is used for all of them. For example, this results in a 50% reduction in chrominance data using 2-pixel blocks (4:2:2) or 75% using 4-pixel blocks (4:2:0). This process does not reduce the number of possible color values that can be displayed, but it reduces
1771-513: Is often described as 576i50 , where 576 indicates the total number of horizontal scan lines, i indicates interlacing, and 50 indicates 50 fields (half-frames) per second. When displaying a natively interlaced signal on a progressive scan device, the overall spatial resolution is degraded by simple line doubling —artifacts, such as flickering or "comb" effects in moving parts of the image that appear unless special signal processing eliminates them. A procedure known as deinterlacing can optimize
1848-527: Is reduced by registering differences between parts of a single frame; this task is known as intraframe compression and is closely related to image compression . Likewise, temporal redundancy can be reduced by registering differences between frames; this task is known as interframe compression , including motion compensation and other techniques. The most common modern compression standards are MPEG-2 , used for DVD , Blu-ray, and satellite television , and MPEG-4 , used for AVCHD , mobile phones (3GP), and
1925-494: Is repeated, playing twice, while every even frame is tripled. This creates uneven motion, appearing stroboscopic. Other conversions have similar uneven frame doubling. Newer video standards support 120, 240, or 300 frames per second, so frames can be evenly sampled for standard frame rates such as 24, 48 and 60 FPS film or 25, 30, 50 or 60 FPS video. Of course these higher frame rates may also be displayed at their native rates. In electronic camera specifications frame rate refers to
2002-421: Is shot at a slower frame rate of 24 frames per second, which slightly complicates the process of transferring a cinematic motion picture to video. The minimum frame rate to achieve a comfortable illusion of a moving image is about sixteen frames per second. Video can be interlaced or progressive . In progressive scan systems, each refresh period updates all scan lines in each frame in sequence. When displaying
2079-412: Is that decompressed video has lower quality than the original, uncompressed video because there is insufficient information to accurately reconstruct the original video. Electronics Electronic devices have hugely influenced the development of many aspects of modern society, such as telecommunications , entertainment, education, health care, industry, and security. The main driving force behind
2156-474: Is the rate at which a system, particularly a GPU , is able to generate frames, and refresh rate is the frequency at which a display shows completed frames. In electronic camera specifications frame rate refers to the maximum possible rate frames could be captured, but in practice, other settings (such as exposure time) may reduce the actual frequency to a lower number than the frame rate. The temporal sensitivity and resolution of human vision varies depending on
2233-595: Is the voltage comparator which receives a continuous range of voltage but only outputs one of two levels as in a digital circuit. Similarly, an overdriven transistor amplifier can take on the characteristics of a controlled switch , having essentially two levels of output. Analog circuits are still widely used for signal amplification, such as in the entertainment industry, and conditioning signals from analog sensors, such as in industrial measurement and control. Digital circuits are electric circuits based on discrete voltage levels. Digital circuits use Boolean algebra and are
2310-448: Is therefore the process of defining and developing complex electronic devices to satisfy specified requirements of the user. Due to the complex nature of electronics theory, laboratory experimentation is an important part of the development of electronic devices. These experiments are used to test or verify the engineer's design and detect errors. Historically, electronics labs have consisted of electronics devices and equipment located in
2387-415: Is typically the frequency (rate) at which consecutive images ( frames ) are captured or displayed. This definition applies to film and video cameras , computer animation , and motion capture systems. In these contexts, frame rate may be used interchangeably with frame frequency and refresh rate , which are expressed in hertz . Additionally, in the context of computer graphics performance, FPS
Video - Misplaced Pages Continue
2464-507: Is used in NTSC television, YUV is used in PAL television, YDbDr is used by SECAM television, and YCbCr is used for digital video. The number of distinct colors a pixel can represent depends on the color depth expressed in the number of bits per pixel. A common way to reduce the amount of data required in digital video is by chroma subsampling (e.g., 4:4:4, 4:2:2, etc.). Because the human eye
2541-440: Is used in both consumer and professional television production applications. Digital video signal formats have been adopted, including serial digital interface (SDI), Digital Visual Interface (DVI), High-Definition Multimedia Interface (HDMI) and DisplayPort Interface. Video can be transmitted or transported in a variety of ways including wireless terrestrial television as an analog or digital signal, coaxial cable in
2618-624: The IBM 608 was the first IBM product to use transistor circuits without any vacuum tubes and is believed to be the first all-transistorized calculator to be manufactured for the commercial market. The 608 contained more than 3,000 germanium transistors. Thomas J. Watson Jr. ordered all future IBM products to use transistors in their design. From that time on transistors were almost exclusively used for computer logic circuits and peripheral devices. However, early junction transistors were relatively bulky devices that were difficult to manufacture on
2695-503: The MPEG-2 and other video coding formats and include: Analog television broadcast standards include: An analog video format consists of more information than the visible content of the frame. Preceding and following the image are lines and pixels containing metadata and synchronization information. This surrounding margin is known as a blanking interval or blanking region ; the horizontal and vertical front porch and back porch are
2772-555: The consumer market . Digital video is capable of higher quality and, eventually, a much lower cost than earlier analog technology. After the commercial introduction of the DVD in 1997 and later the Blu-ray Disc in 2006, sales of videotape and recording equipment plummeted. Advances in computer technology allow even inexpensive personal computers and smartphones to capture, store, edit, and transmit digital video, further reducing
2849-459: The electron in 1897 by Sir Joseph John Thomson , along with the subsequent invention of the vacuum tube which could amplify and rectify small electrical signals , inaugurated the field of electronics and the electron age. Practical applications started with the invention of the diode by Ambrose Fleming and the triode by Lee De Forest in the early 1900s, which made the detection of small electrical voltages, such as radio signals from
2926-563: The "optimal" frame rate for smoothly animated game play. Video games designed for PAL markets, before the sixth generation of video game consoles , had lower frame rates by design due to the 50 Hz output. This noticably made fast-paced games, such as racing or fighting games, run slower. Frame rate up-conversion (FRC) is the process of increasing the temporal resolution of a video sequence by synthesizing one or more intermediate frames between two consecutive frames. A low frame rate causes aliasing , yields abrupt motion artifacts, and degrades
3003-448: The 1960s, U.S. manufacturers were unable to compete with Japanese companies such as Sony and Hitachi who could produce high-quality goods at lower prices. By the 1980s, however, U.S. manufacturers became the world leaders in semiconductor development and assembly. However, during the 1990s and subsequently, the industry shifted overwhelmingly to East Asia (a process begun with the initial movement of microchip mass-production there in
3080-538: The 1970s), as plentiful, cheap labor, and increasing technological sophistication, became widely available there. Over three decades, the United States' global share of semiconductor manufacturing capacity fell, from 37% in 1990, to 12% in 2022. America's pre-eminent semiconductor manufacturer, Intel Corporation , fell far behind its subcontractor Taiwan Semiconductor Manufacturing Company (TSMC) in manufacturing technology. By that time, Taiwan had become
3157-712: The EDA software world are NI Multisim, Cadence ( ORCAD ), EAGLE PCB and Schematic, Mentor (PADS PCB and LOGIC Schematic), Altium (Protel), LabCentre Electronics (Proteus), gEDA , KiCad and many others. Heat generated by electronic circuitry must be dissipated to prevent immediate failure and improve long term reliability. Heat dissipation is mostly achieved by passive conduction/convection. Means to achieve greater dissipation include heat sinks and fans for air cooling, and other forms of computer cooling such as water cooling . These techniques use convection , conduction , and radiation of heat energy . Electronic noise
Video - Misplaced Pages Continue
3234-464: The Internet. Stereoscopic video for 3D film and other applications can be displayed using several different methods: Different layers of video transmission and storage each provide their own set of formats to choose from. For transmission, there is a physical connector and signal protocol (see List of video connectors ). A given physical link can carry certain display standards that specify
3311-491: The PAL and NTSC variants of the CCIR 601 digital video standard and the corresponding anamorphic widescreen formats. The 720 by 480 pixel raster uses thin pixels on a 4:3 aspect ratio display and fat pixels on a 16:9 display. The popularity of viewing video on mobile phones has led to the growth of vertical video . Mary Meeker , a partner at Silicon Valley venture capital firm Kleiner Perkins Caufield & Byers , highlighted
3388-535: The advancement of electronics is the semiconductor industry , which in response to global demand continually produces ever-more sophisticated electronic devices and circuits. The semiconductor industry is one of the largest and most profitable sectors in the global economy, with annual revenues exceeding $ 481 billion in 2018. The electronics industry also encompasses other sectors that rely on electronic devices and systems, such as e-commerce, which generated over $ 29 trillion in online sales in 2017. The identification of
3465-409: The basis of all digital computers and microprocessor devices. They range from simple logic gates to large integrated circuits, employing millions of such gates. Digital circuits use a binary system with two voltage levels labelled "0" and "1" to indicated logical status. Often logic "0" will be a lower voltage and referred to as "Low" while logic "1" is referred to as "High". However, some systems use
3542-450: The building blocks of the blanking interval. Computer display standards specify a combination of aspect ratio, display size, display resolution, color depth, and refresh rate. A list of common resolutions is available. Early television was almost exclusively a live medium, with some programs recorded to film for historical purposes using Kinescope . The analog video tape recorder was commercially introduced in 1951. The following list
3619-459: The circuit, thus slowing the computer. The invention of the integrated circuit by Jack Kilby and Robert Noyce solved this problem by making all the components and the chip out of the same block (monolith) of semiconductor material. The circuits could be made smaller, and the manufacturing process could be automated. This led to the idea of integrating all components on a single-crystal silicon wafer, which led to small-scale integration (SSI) in
3696-438: The context of video compression, codec is a portmanteau of encoder and decoder , while a device that only compresses is typically called an encoder , and one that only decompresses is a decoder . The compressed data format usually conforms to a standard video coding format . The compression is typically lossy , meaning that the compressed video lacks some information present in the original video. A consequence of this
3773-417: The cost of video production and allowing programmers and broadcasters to move to tapeless production . The advent of digital broadcasting and the subsequent digital television transition are in the process of relegating analog video to the status of a legacy technology in most parts of the world. The development of high-resolution video cameras with improved dynamic range and color gamuts , along with
3850-506: The display of an interlaced video signal from an analog, DVD, or satellite source on a progressive scan device such as an LCD television , digital video projector , or plasma panel. Deinterlacing cannot, however, produce video quality that is equivalent to true progressive scan source material. Aspect ratio describes the proportional relationship between the width and height of video screens and video picture elements. All popular video formats are rectangular , and this can be described by
3927-874: The early 1960s, and then medium-scale integration (MSI) in the late 1960s, followed by VLSI . In 2008, billion-transistor processors became commercially available. An electronic component is any component in an electronic system either active or passive. Components are connected together, usually by being soldered to a printed circuit board (PCB), to create an electronic circuit with a particular function. Components may be packaged singly, or in more complex groups as integrated circuits . Passive electronic components are capacitors , inductors , resistors , whilst active components are such as semiconductor devices; transistors and thyristors , which control current flow at electron level. Electronic circuit functions can be divided into two function groups: analog and digital. A particular device may consist of circuitry that has either or
SECTION 50
#17327732000134004-452: The electronic logic gates to generate binary states. Highly integrated devices: Electronic systems design deals with the multi-disciplinary design issues of complex electronic devices and systems, such as mobile phones and computers . The subject covers a broad spectrum, from the design and development of an electronic system ( new product development ) to assuring its proper function, service life and disposal . Electronic systems design
4081-443: The fields one at a time, rather than dividing up a complete frame after it is captured, the frame rate for motion is effectively doubled as well, resulting in smoother, more lifelike reproduction of rapidly moving parts of the image when viewed on an interlaced CRT display. NTSC, PAL, and SECAM are interlaced formats. Abbreviated video resolution specifications often include an i to indicate interlacing. For example, PAL video format
4158-413: The first practical video tape recorders (VTR). In 1951, the first VTR captured live images from television cameras by writing the camera's electrical signal onto magnetic videotape . Video recorders were sold for $ 50,000 in 1956, and videotapes cost US$ 300 per one-hour reel. However, prices gradually dropped over the years; in 1971, Sony began selling videocassette recorder (VCR) decks and tapes into
4235-562: The following ways: The electronics industry consists of various sectors. The central driving force behind the entire electronics industry is the semiconductor industry sector, which has annual sales of over $ 481 billion as of 2018. The largest industry sector is e-commerce , which generated over $ 29 trillion in 2017. The most widely manufactured electronic device is the metal-oxide-semiconductor field-effect transistor (MOSFET), with an estimated 13 sextillion MOSFETs having been manufactured between 1960 and 2018. In
4312-421: The frame rate for silent film increased to 20–26 FPS. When sound film was introduced in 1926, variations in film speed were no longer tolerated, as the human ear is more sensitive than the eye to changes in frequency. Many theaters had shown silent films at 22 to 26 FPS, which is why the industry chose 24 FPS for sound film as a compromise. From 1927 to 1930, as various studios updated equipment,
4389-489: The functions of analog circuits were taken over by digital circuits, and modern circuits that are entirely analog are less common; their functions being replaced by hybrid approach which, for instance, uses analog circuits at the front end of a device receiving an analog signal, and then use digital processing using microprocessor techniques thereafter. Sometimes it may be difficult to classify some circuits that have elements of both linear and non-linear operation. An example
4466-465: The growth of vertical video viewing in her 2015 Internet Trends Report – growing from 5% of video viewing in 2010 to 29% in 2015. Vertical video ads like Snapchat 's are watched in their entirety nine times more frequently than landscape video ads. The color model uses the video color representation and maps encoded color values to visible colors reproduced by the system. There are several such representations in common use: typically, YIQ
4543-432: The horizontal scan lines of each complete frame are treated as if numbered consecutively and captured as two fields : an odd field (upper field) consisting of the odd-numbered lines and an even field (lower field) consisting of the even-numbered lines. Analog display devices reproduce each frame, effectively doubling the frame rate as far as perceptible overall flicker is concerned. When the image capture device acquires
4620-751: The introduction of high-dynamic-range digital intermediate data formats with improved color depth , has caused digital video technology to converge with film technology. Since 2013, the use of digital cameras in Hollywood has surpassed the use of film cameras. Frame rate , the number of still pictures per unit of time of video, ranges from six or eight frames per second ( frame/s ) for old mechanical cameras to 120 or more frames per second for new professional cameras. PAL standards (Europe, Asia, Australia, etc.) and SECAM (France, Russia, parts of Africa, etc.) specify 25 frame/s, while NTSC standards (United States, Canada, Japan, etc.) specify 29.97 frame/s. Film
4697-423: The maximum possible rate frames that can be captured (e.g. if the exposure time were set to near-zero), but in practice, other settings (such as exposure time) may reduce the actual frequency to a lower number than the frame rate. In computer video games , frame rate plays an important part in the experience as, unlike film, games are rendered in real-time . 60 frames per second has for a long time been considered
SECTION 60
#17327732000134774-399: The most widely used electronic device in the world. The MOSFET is the basic element in most modern electronic equipment. As the complexity of circuits grew, problems arose. One problem was the size of the circuit. A complex circuit like a computer was dependent on speed. If the components were large, the wires interconnecting them must be long. The electric signals took time to go through
4851-636: The number of distinct points at which the color changes. Video quality can be measured with formal metrics like peak signal-to-noise ratio (PSNR) or through subjective video quality assessment using expert observation. Many subjective video quality methods are described in the ITU-T recommendation BT.500 . One of the standardized methods is the Double Stimulus Impairment Scale (DSIS). In DSIS, each expert views an unimpaired reference video, followed by an impaired version of
4928-439: The photographic process and stretched back to fill the screen on playback in a television set. The 720p format produces 59.94/50 or 29.97/25 1280×720p images, not squeezed, so that no expansion or squeezing of the image is necessary. This confusion was industry-wide in the early days of digital video software, with much software being written incorrectly, the developers believing that only 29.97 images were expected each second, which
5005-414: The rate of 24 FPS became standard for 35 mm sound film. At 24 FPS, the film travels through the projector at a rate of 456 millimetres (18.0 in) per second. This allowed simple two-blade shutters to give a projected series of images at 48 per second, satisfying Edison's recommendation. Many modern 35 mm film projectors use three-blade shutters to give 72 images per second—each frame
5082-406: The rate often changed during the scene to fit the mood. Projectionists could also change the frame rate in the theater by adjusting a rheostat controlling the voltage powering the film-carrying mechanism in the projector . Film companies often intended that theaters show their silent films at higher frame rates than they were filmed at. These frame rates were enough for the sense of motion, but it
5159-540: The reverse definition ("0" is "High") or are current based. Quite often the logic designer may reverse these definitions from one circuit to the next as they see fit to facilitate their design. The definition of the levels as "0" or "1" is arbitrary. Ternary (with three states) logic has been studied, and some prototype computers made, but have not gained any significant practical acceptance. Universally, Computers and Digital signal processors are constructed with digital circuits using Transistors such as MOSFETs in
5236-436: The same video. The expert then rates the impaired video using a scale ranging from "impairments are imperceptible" to "impairments are very annoying." Uncompressed video delivers maximum quality, but at a very high data rate . A variety of methods are used to compress video streams, with the most effective ones using a group of pictures (GOP) to reduce spatial and temporal redundancy . Broadly speaking, spatial redundancy
5313-495: The target intermediate frame to the input frames. They also propose flow reversal (projection) for more accurate image warping . Moreover, there are algorithms that give different weights of overlapped flow vectors depending on the object depth of the scene via a flow projection layer. Pixel hallucination-based methods use deformable convolution to the center frame generator by replacing optical flows with offset vectors. There are algorithms that also interpolate middle frames with
5390-425: The type and characteristics of visual stimulus, and it differs between individuals. The human visual system can process 10 to 12 images per second and perceive them individually, while higher rates are perceived as motion. Modulated light (such as a computer display ) is perceived as stable by the majority of participants in studies when the rate is higher than 50 Hz. This perception of modulated light as steady
5467-476: The video quality. Consequently, the temporal resolution is an important factor affecting video quality. Algorithms for FRC are widely used in applications, including visual quality enhancement, video compression and slow-motion video generation. Most FRC methods can be categorized into optical flow or kernel-based and pixel hallucination-based methods. Flow-based methods linearly combine predicted optical flows between two input frames to approximate flows from
5544-626: The world's leading source of advanced semiconductors —followed by South Korea , the United States , Japan , Singapore , and China . Important semiconductor industry facilities (which often are subsidiaries of a leading producer based elsewhere) also exist in Europe (notably the Netherlands ), Southeast Asia, South America, and Israel . Frame rate Frame rate , most commonly expressed in frames per second or FPS ,
5621-762: The years. For instance, early electronics often used point to point wiring with components attached to wooden breadboards to construct circuits. Cordwood construction and wire wrap were other methods used. Most modern day electronics now use printed circuit boards made of materials such as FR4 , or the cheaper (and less hard-wearing) Synthetic Resin Bonded Paper ( SRBP , also known as Paxoline/Paxolin (trade marks) and FR2) – characterised by its brown colour. Health and environmental concerns associated with electronics assembly have gained increased attention in recent years, especially for products destined to go to European markets. Electrical components are generally mounted in
5698-482: Was incorrect. While it was true that each picture element was polled and sent only 29.97 times per second, the pixel location immediately below that one was polled 1/60 of a second later, part of a completely separate image for the next 1/60-second frame. At its native 24 FPS rate, film could not be displayed on 60 Hz video without the necessary pulldown process, often leading to "judder": To convert 24 frames per second into 60 frames per second, every odd frame
5775-406: Was originally exclusively live technology. Live video cameras used an electron beam, which would scan a photoconductive plate with the desired image and produce a voltage signal proportional to the brightness in each part of the image. The signal could then be sent to televisions, where another beam would receive and display the image. Charles Ginsburg led an Ampex research team to develop one of
5852-411: Was perceived as jerky motion. To minimize the perceived flicker, projectors employed dual- and triple-blade shutters , so each frame was displayed two or three times, increasing the flicker rate to 48 or 72 hertz and reducing eye strain. Thomas Edison said that 46 frames per second was the minimum needed for the eye to perceive motion: "Anything less will strain the eye." In the mid to late 1920s,
5929-473: Was rapid, and by the 1920s, commercial radio broadcasting and telecommunications were becoming widespread and electronic amplifiers were being used in such diverse applications as long-distance telephony and the music recording industry. The next big technological step took several decades to appear, when the first working point-contact transistor was invented by John Bardeen and Walter Houser Brattain at Bell Labs in 1947. However, vacuum tubes played
#12987