110-670: CP/M , originally standing for Control Program/Monitor and later Control Program for Microcomputers , is a mass-market operating system created in 1974 for Intel 8080 / 85 -based microcomputers by Gary Kildall of Digital Research, Inc. CP/M is a disk operating system and its purpose is to organize files on a magnetic storage medium, and to load and run programs stored on a disk. Initially confined to single-tasking on 8-bit processors and no more than 64 kilobytes of memory, later versions of CP/M added multi-user variations and were migrated to 16-bit processors . The combination of CP/M and S-100 bus computers became an early standard in
220-428: A system call to perform a block I/O write operation, then the system call might execute the following instructions: While the writing takes place, the operating system will context switch to other processes as normal. When the device finishes writing, the device will interrupt the currently running process by asserting an interrupt request . The device will also place an integer onto the data bus. Upon accepting
330-413: A ROM firmware chip) loads the operating system from the disk in drive A: . By modern standards CP/M is primitive, owing to the extreme constraints on program size. With version 1.0 there is no provision for detecting a changed disk. If a user changes disks without manually rereading the disk directory the system writes on the new disk using the old disk's directory information, ruining the data stored on
440-467: A competitor in the spreadsheet market in the MS-DOS world. AutoCAD , a CAD application from Autodesk debuted on CP/M. A host of compilers and interpreters for popular programming languages of the time (such as BASIC , Borland 's Turbo Pascal , FORTRAN and even PL/I ) were available, among them several of the earliest Microsoft products. CP/M software often came with installers that adapted it to
550-645: A computer even if they are not compatible with the base operating system. A library operating system (libOS) is one in which the services that a typical operating system provides, such as networking, are provided in the form of libraries and composed with a single application and configuration code to construct a unikernel : a specialized (only the absolute necessary pieces of code are extracted from libraries and bound together ), single address space , machine image that can be deployed to cloud or embedded environments. The operating system code and application code are not executed in separated protection domains (there
660-526: A corporation change-of-name filing to Digital Research, Inc. By September 1981, Digital Research had sold more than 250,000 CP/M licenses; InfoWorld stated that the actual market was likely larger because of sublicenses. Many different companies produced CP/M-based computers for many different markets; the magazine stated that "CP/M is well on its way to establishing itself as the small-computer operating system". The companies chose to support CP/M because of its large library of software. The Xerox 820 ran
770-585: A development of MULTICS for a single user. Because UNIX's source code was available, it became the basis of other, incompatible operating systems, of which the most successful were AT&T 's System V and the University of California 's Berkeley Software Distribution (BSD). To increase compatibility, the IEEE released the POSIX standard for operating system application programming interfaces (APIs), which
880-773: A directory except those marked with the SYS attribute), DIRSYS / DIRS (list files marked with the SYS attribute in the directory), ERASE / ERA (delete a file), RENAME / REN (rename a file), TYPE / TYP (display contents of an ASCII character file), and USER / USE (change user number) as built-in commands: CP/M 3 allows the user to abbreviate the built-in commands. Transient commands in CP/M 3 include COPYSYS , DATE , DEVICE , DUMP , ED , GET , HELP , HEXCOM , INITDIR , LINK , MAC , PIP, PUT , RMAC , SET , SETDEF , SHOW , SID , SUBMIT , and XREF . The Basic Disk Operating System, or BDOS, provides access to such operations as opening
990-464: A directory or ERA to delete a file) or loads and starts an executable file of the given name (transient commands such as PIP.COM to copy files or STAT.COM to show various file and system information). Third-party applications for CP/M are also essentially transient commands. The BDOS, CCP and standard transient commands are the same in all installations of a particular revision of CP/M, but the BIOS portion
1100-445: A dozen different CP/M systems, plus two generic versions. The operating system was described as a " software bus ", allowing multiple programs to interact with different hardware in a standardized way. Programs written for CP/M were typically portable among different machines, usually requiring only the specification of the escape sequences for control of the screen and printer. This portability made CP/M popular, and much more software
1210-427: A file, output to the console, or printing. Application programs load processor registers with a function code for the operation, and addresses for parameters or memory buffers , and call a fixed address in memory. Since the address is the same independent of the amount of memory in the system, application programs run the same way for any type or configuration of hardware. The Basic Input Output System or BIOS, provides
SECTION 10
#17327830143351320-484: A large legal settlement was paid. In the twenty-first century, Windows continues to be popular on personal computers but has less market share of servers. UNIX operating systems, especially Linux, are the most popular on enterprise systems and servers but are also used on mobile devices and many other computer systems. On mobile devices, Symbian OS was dominant at first, being usurped by BlackBerry OS (introduced 2002) and iOS for iPhones (from 2007). Later on,
1430-442: A library with no protection between applications, such as eCos . A hypervisor is an operating system that runs a virtual machine . The virtual machine is unaware that it is an application and operates as if it had its own hardware. Virtual machines can be paused, saved, and resumed, making them useful for operating systems research, development, and debugging. They also enhance portability by enabling applications to be run on
1540-447: A malformed machine instruction . However, the most common error conditions are division by zero and accessing an invalid memory address . Users can send messages to the kernel to modify the behavior of a currently running process. For example, in the command-line environment , pressing the interrupt character (usually Control-C ) might terminate the currently running process. To generate software interrupts for x86 CPUs,
1650-477: A part of the Amateur Computer Club of New Jersey . ZCPR2 was released on 14 February 1983. It was released as a set of ten disks from SIG/M. ZCPR2 was upgraded to 2.3, and also was released in 8080 code, permitting the use of ZCPR2 on 8080 and 8085 systems. ZCPR3 was released on 14 July 1984, as a set of nine disks from SIG/M. The code for ZCPR3 could also be compiled (with reduced features) for
1760-455: A particular application's memory is stored, or even whether or not it has been allocated yet. In modern operating systems, memory which is accessed less frequently can be temporarily stored on a disk or other media to make that space available for use by other programs. This is called swapping , as an area of memory can be used by multiple programs, and what that memory area contains can be swapped or exchanged on demand. Virtual memory provides
1870-515: A prevailing naming scheme of the time, as in Kildall's PL/M language, and Prime Computer's PL/P ( Programming Language for Prime ), both suggesting IBM's PL/I ; and IBM's CP/CMS operating system, which Kildall had used when working at the NPS. This renaming of CP/M was part of a larger effort by Kildall and his wife with business partner, Dorothy McEwen to convert Kildall's personal project of CP/M and
1980-503: A program does not interfere with memory already in use by another program. Since programs time share, each program must have independent access to memory. Cooperative memory management, used by many early operating systems, assumes that all programs make voluntary use of the kernel 's memory manager, and do not exceed their allocated memory. This system of memory management is almost never seen any more, since programs often contain bugs which can cause them to exceed their allocated memory. If
2090-408: A program fails, it may cause memory used by one or more other programs to be affected or overwritten. Malicious programs or viruses may purposefully alter another program's memory, or may affect the operation of the operating system itself. With cooperative memory management, it takes only one misbehaved program to crash the system. Memory protection enables the kernel to limit a process' access to
2200-440: A program tries to access memory that is not accessible memory, but nonetheless has been allocated to it, the kernel is interrupted (see § Memory management ) . This kind of interrupt is typically a page fault . When the kernel detects a page fault it generally adjusts the virtual memory range of the program which triggered it, granting it access to the memory requested. This gives the kernel discretionary power over where
2310-506: A program was not standardized, so that there is no single option character that differentiated options from file names. Different programs can and do use different characters. The CP/M Console Command Processor includes DIR , ERA , REN , SAVE , TYPE , and USER as built-in commands. Transient commands in CP/M include ASM , DDT , DUMP , ED , LOAD , MOVCPM [ pl ] , PIP , STAT , SUBMIT , and SYSGEN . CP/M Plus (CP/M Version 3) includes DIR (display list of files from
SECTION 20
#17327830143352420-598: A result, some systems had more TPA memory available than others. Bank switching was a common technique that allowed systems to have a large TPA while switching out ROM or video memory space as needed. CP/M 3.0 allowed parts of the BDOS to be in bank-switched memory as well. Operating system An operating system ( OS ) is system software that manages computer hardware and software resources, and provides common services for computer programs . Time-sharing operating systems schedule tasks for efficient use of
2530-470: A significant amount of CPU time. Direct memory access (DMA) is an architecture feature to allow devices to bypass the CPU and access main memory directly. (Separate from the architecture, a device may perform direct memory access to and from main memory either directly or via a bus.) When a computer user types a key on the keyboard, typically the character appears immediately on the screen. Likewise, when
2640-402: A specific moment in time. Hard real-time systems require exact timing and are common in manufacturing , avionics , military, and other similar uses. With soft real-time systems, the occasional missed event is acceptable; this category often includes audio or multimedia systems, as well as smartphones. In order for hard real-time systems be sufficiently exact in their timing, often they are just
2750-417: A user moves a mouse , the cursor immediately moves across the screen. Each keystroke and mouse movement generates an interrupt called Interrupt-driven I/O . An interrupt-driven I/O occurs when a process causes an interrupt for every character or word transmitted. Devices such as hard disk drives , solid-state drives , and magnetic tape drives can transfer data at a rate high enough that interrupting
2860-530: A user-installed overlay containing all the code required to access a particular machine's serial port. WordStar, one of the first widely used word processors , and dBase , an early and popular database program for microcomputers, were originally written for CP/M. Two early outliners , KAMAS (Knowledge and Mind Amplification System) and its cut-down successor Out-Think (without programming facilities and retooled for 8080/V20 compatibility) were also written for CP/M, though later rewritten for MS-DOS. Turbo Pascal ,
2970-453: A variation of the classic reader/writer problem . The writer receives a pipe from the shell for its output to be sent to the reader's input stream. The command-line syntax is alpha | bravo . alpha will write to the pipe when its computation is ready and then sleep in the wait queue. bravo will then be moved to the ready queue and soon will read from its input stream. The kernel will generate software interrupts to coordinate
3080-535: A wide variety of computers. The source code for BASIC programs was easily accessible, and most forms of copy protection were ineffective on the operating system. A Kaypro II owner, for example, would obtain software on Xerox 820 format, then copy it to and run it from Kaypro-format disks. The lack of standardized graphics support limited video games , but various character and text-based games were ported , such as Telengard , Gorillas , Hamurabi , Lunar Lander , along with early interactive fiction including
3190-418: Is interrupted by it. Operating systems are found on many devices that contain a computer – from cellular phones and video game consoles to web servers and supercomputers . In the personal computer market, as of September 2024 , Microsoft Windows holds a dominant market share of around 73%. macOS by Apple Inc. is in second place (15%), Linux is in third place (5%), and ChromeOS
3300-562: Is remote direct memory access , which enables each CPU to access memory belonging to other CPUs. Multicomputer operating systems often support remote procedure calls where a CPU can call a procedure on another CPU, or distributed shared memory , in which the operating system uses virtualization to generate shared memory that does not physically exist. A distributed system is a group of distinct, networked computers—each of which might have their own operating system and file system. Unlike multicomputers, they may be dispersed anywhere in
3410-484: Is a change away from the currently running process. Similarly, both hardware and software interrupts execute an interrupt service routine . Software interrupts may be normally occurring events. It is expected that a time slice will occur, so the kernel will have to perform a context switch . A computer program may set a timer to go off after a few seconds in case too much data causes an algorithm to take too long. Software interrupts may be error conditions, such as
CP/M - Misplaced Pages Continue
3520-451: Is always adapted to the particular hardware. Adding memory to a computer, for example, means that the CP/M system must be reinstalled to allow transient programs to use the additional memory space. A utility program (MOVCPM) is provided with system distribution that allows relocating the object code to different memory areas. The utility program adjusts the addresses in absolute jump and subroutine call instructions to new addresses required by
3630-422: Is difficult to define, but has been called "the layer of software that manages a computer's resources for its users and their applications ". Operating systems include the software that is always running, called a kernel —but can include other software as well. The two other types of programs that can run on a computer are system programs —which are associated with the operating system, but may not be part of
3740-896: Is in fourth place (2%). In the mobile sector (including smartphones and tablets ), as of September 2023 , Android's share is 68.92%, followed by Apple's iOS and iPadOS with 30.42%, and other operating systems with .66%. Linux distributions are dominant in the server and supercomputing sectors. Other specialized classes of operating systems (special-purpose operating systems), such as embedded and real-time systems, exist for many applications. Security-focused operating systems also exist. Some operating systems have low system requirements (e.g. light-weight Linux distribution ). Others may have higher system requirements. Some operating systems require installation or may come pre-installed with purchased computers ( OEM -installation), whereas others may run directly from media (i.e. live CD ) or flash memory (i.e. USB stick). An operating system
3850-443: Is only a single application running, at least conceptually, so there is no need to prevent interference between applications) and OS services are accessed via simple library calls (potentially inlining them based on compiler thresholds), without the usual overhead of context switches , in a way similarly to embedded and real-time OSes. Note that this overhead is not negligible: to the direct cost of mode switching it's necessary to add
3960-499: Is supported by most UNIX systems. MINIX was a stripped-down version of UNIX, developed in 1987 for educational uses, that inspired the commercially available, free software Linux . Since 2008, MINIX is used in controllers of most Intel microchips , while Linux is widespread in data centers and Android smartphones. The invention of large scale integration enabled the production of personal computers (initially called microcomputers ) from around 1980. For around five years,
4070-473: Is that they do not load user-installed software. Consequently, they do not need protection between different applications, enabling simpler designs. Very small operating systems might run in less than 10 kilobytes , and the smallest are for smart cards . Examples include Embedded Linux , QNX , VxWorks , and the extra-small systems RIOT and TinyOS . A real-time operating system is an operating system that guarantees to process events or data by or at
4180-435: Is the part of the operating system that provides protection between different applications and users. This protection is key to improving reliability by keeping errors isolated to one program, as well as security by limiting the power of malicious software and protecting private data, and ensuring that one program cannot monopolize the computer's resources. Most operating systems have two modes of operation: in user mode ,
4290-533: The Zork series and Colossal Cave Adventure . Text adventure specialist Infocom was one of the few publishers to consistently release their games in CP/M format. Lifeboat Associates started collecting and distributing user-written "free" software. One of the first was XMODEM , which allowed reliable file transfers via modem and phone line. Another program native to CP/M was the outline processor KAMAS. The read/write memory between address 0100 hexadecimal and
4400-542: The CP/M (Control Program for Microcomputers) was the most popular operating system for microcomputers. Later, IBM bought the DOS (Disk Operating System) from Microsoft . After modifications requested by IBM, the resulting system was called MS-DOS (MicroSoft Disk Operating System) and was widely used on IBM microcomputers. Later versions increased their sophistication, in part by borrowing features from UNIX. Apple 's Macintosh
4510-504: The INT assembly language instruction is available. The syntax is INT X , where X is the offset number (in hexadecimal format) to the interrupt vector table . To generate software interrupts in Unix-like operating systems, the kill(pid,signum) system call will send a signal to another process. pid is the process identifier of the receiving process. signum is
CP/M - Misplaced Pages Continue
4620-588: The PDP-11 and OS/8 for the PDP-8 . Commands take the form of a keyword followed by a list of parameters separated by spaces or special characters. Similar to a Unix shell builtin , if an internal command is recognized, it is carried out by the CCP itself. Otherwise it attempts to find an executable file on the currently logged disk drive and (in later versions) user area, loads it, and passes it any additional parameters from
4730-526: The TOPS-10 operating system of the DECsystem-10 mainframe computer , which Kildall had used as a development environment. An early outside licensee of CP/M was Gnat Computers , an early microcomputer developer out of San Diego, California . In 1977, the company was granted the license to use CP/M 1.0 for any micro they desired for $ 90. Within the year, demand for CP/M was so high that Digital Research
4840-437: The extension .COM on disk. The BIOS directly controls hardware components other than the CPU and main memory. It contains functions such as character input and output and the reading and writing of disk sectors. The BDOS implements the CP/M file system and some input/output abstractions (such as redirection) on top of the BIOS. The CCP takes user commands and either executes them directly (internal commands such as DIR to show
4950-420: The transistor in the mid-1950s, mainframes began to be built. These still needed professional operators who manually do what a modern operating system would do, such as scheduling programs to run, but mainframes still had rudimentary operating systems such as Fortran Monitor System (FMS) and IBSYS . In the 1960s, IBM introduced the first series of intercompatible computers ( System/360 ). All of them ran
5060-440: The 7-bit boundary. In the 8-bit versions, while running, the CP/M operating system loaded into memory has three components: The BIOS and BDOS are memory-resident, while the CCP is memory-resident unless overwritten by an application, in which case it is automatically reloaded after the application finished running. A number of transient commands for standard utilities are also provided. The transient commands reside in files with
5170-429: The 8080 I/O address space. All of these variations in the hardware are concealed from other modules of the system by use of the BIOS, which uses standard entry points for the services required to run CP/M such as character I/O or accessing a disk block. Since support for serial communication to a modem is very rudimentary in the BIOS or may be absent altogether, it is common practice for CP/M programs that use modems to have
5280-421: The 8080 and would run on systems that did not have the requisite Z80 microprocessor. Features of ZCPR as of version 3 included shells, aliases, I/O redirection, flow control, named directories, search paths, custom menus, passwords, and online help. In January 1987, Richard Conn stopped developing ZCPR, and Echelon asked Jay Sage (who already had a privately enhanced ZCPR 3.1) to continue work on it. Thus, ZCPR 3.3
5390-481: The CP/M base included Robert "Bob" Silberstein and David "Dave" K. Brown. CP/M originally stood for "Control Program/Monitor", a name which implies a resident monitor —a primitive precursor to the operating system. However, during the conversion of CP/M to a commercial product, trademark registration documents filed in November 1977 gave the product's name as "Control Program for Microcomputers". The CP/M name follows
5500-410: The CPU for every byte or word transferred, and having the CPU transfer the byte or word between the device and memory, would require too much CPU time. Data is, instead, transferred between the device and memory independently of the CPU by hardware such as a channel or a direct memory access controller; an interrupt is delivered only when all the data is transferred. If a computer program executes
5610-474: The CPU to re-enter supervisor mode , placing the kernel in charge. This is called a segmentation violation or Seg-V for short, and since it is both difficult to assign a meaningful result to such an operation, and because it is usually a sign of a misbehaving program, the kernel generally resorts to terminating the offending program, and reports the error. Windows versions 3.1 through ME had some level of memory protection, but programs could easily circumvent
SECTION 50
#17327830143355720-644: The Digital Research distributed core of CP/M (BDOS, CCP, core transient commands) did not use any of the Z80-specific instructions, many Z80-based systems used Z80 code in the system-specific BIOS, and many applications were dedicated to Z80-based CP/M machines. Digital Research subsequently partnered with Zilog and American Microsystems to produce Personal CP/M, a ROM-based version of the operating system aimed at lower-cost systems that could potentially be equipped without disk drives. First featured in
5830-586: The IBM PC after DRI threatened legal action, it never overtook Microsoft's system. Most customers were repelled by the significantly greater price IBM charged for CP/M-86 over PC DOS ( US$ 240 and US$ 40, respectively). When Digital Equipment Corporation (DEC) put out the Rainbow 100 to compete with IBM, it came with CP/M-80 using a Z80 chip, CP/M-86 or MS-DOS using an 8088 microprocessor, or CP/M-86/80 using both. The Z80 and 8088 CPUs ran concurrently. A benefit of
5940-471: The IBM-compatible platform, and it never regained its former popularity. Byte magazine, at the time one of the leading industry magazines for microcomputers, essentially ceased covering CP/M products within a few years of the introduction of the IBM PC. For example, in 1983 there were still a few advertisements for S-100 boards and articles on CP/M software, but by 1987 these were no longer found in
6050-575: The Intel 8080 processor into .A86 source code for the Intel 8086. The translator would also optimize the output for code size and take care of calling conventions, so that CP/M-80 and MP/M-80 programs could be ported to the CP/M-86 and MP/M-86 platforms automatically. XLT86 itself was written in PL/I-80 and was available for CP/M-80 platforms as well as for VAX/VMS . Many expected that CP/M would be
6160-489: The Intel-contracted PL/M compiler into a commercial enterprise. The Kildalls intended to establish the Digital Research brand and its product lines as synonymous with "microcomputer" in the consumer's mind, similar to what IBM and Microsoft together later successfully accomplished in making " personal computer " synonymous with their product offerings. Intergalactic Digital Research, Inc. was later renamed via
6270-516: The NIAT, a custom handheld computer designed for A. C. Nielsen 's internal use with 1 MB of SSD memory. In 1979, a multi-user compatible derivative of CP/M was released. MP/M allowed multiple users to connect to a single computer, using multiple terminals to provide each user with a screen and keyboard. Later versions ran on 16-bit processors. The last 8-bit version of CP/M was version 3, often called CP/M Plus, released in 1983. Its BDOS
6380-684: The OS and BIOS (this was also a common problem in early DOS machines). Bill Gates claimed that the Apple II with a Z-80 SoftCard was the single most-popular CP/M hardware platform. Many different brands of machines ran the operating system, some notable examples being the Altair 8800 , the IMSAI 8080 , the Osborne 1 and Kaypro luggables , and MSX computers. The best-selling CP/M-capable system of all time
6490-564: The Rainbow was that it could continue to run 8-bit CP/M software, preserving a user's possibly sizable investment as they moved into the 16-bit world of MS-DOS. A similar dual-processor adaption for the CompuPro System 816 [ sr ] was named CP/M 8-16 . The CP/M-86 adaptation for the 8085/8088-based Zenith Z-100 also supported running programs for both of its CPUs. Soon following CP/M-86, another 16-bit version of CP/M
6600-501: The S83 was quoted as $ 32 in 1,000 unit quantities. On most machines the bootstrap was a minimal bootloader in ROM combined with some means of minimal bank switching or a means of injecting code on the bus (since the 8080 needs to see boot code at Address 0 for start-up, while CP/M needs RAM there); for others, this bootstrap had to be entered into memory using front-panel controls each time
6710-541: The Sharp MZ-800, a cassette-based system with optional disk drives, Personal CP/M was described as having been "rewritten to take advantage of the enhanced Z-80 instruction set" as opposed to preserving portability with the 8080. American Microsystems announced a Z80-compatible microprocessor, the S83, featuring 8 KB of in-package ROM for the operating system and BIOS, together with comprehensive logic for interfacing with 64-kilobit dynamic RAM devices. Unit pricing of
SECTION 60
#17327830143356820-402: The ancestor of Borland Delphi , and Multiplan , the ancestor of Microsoft Excel , also debuted on CP/M before MS-DOS versions became available. VisiCalc , the first-ever spreadsheet program, was made available for CP/M. Another company, Sorcim , created its SuperCalc spreadsheet for CP/M, which would go on to become the market leader and de facto standard on CP/M. Supercalc would go on to be
6930-538: The application program, which then interacts with the user and with hardware devices. However, in some systems an application can request that the operating system execute another application within the same process, either as a subroutine or in a separate thread, e.g., the LINK and ATTACH facilities of OS/360 and successors . An interrupt (also known as an abort , exception , fault , signal , or trap ) provides an efficient way for most operating systems to react to
7040-420: The basic concepts and mechanisms of early versions of MS-DOS resembled those of CP/M. Internals like file-handling data structures were identical, and both referred to disk drives with a letter ( A: , B: , etc.). MS-DOS's main innovation was its FAT file system. This similarity made it easier to port popular CP/M software like WordStar and dBase . However, CP/M's concept of separate user areas for files on
7150-531: The blocking and deblocking and the management of a disk buffer area is handled by model-specific code in the BIOS. Customization is required because hardware choices are not constrained by compatibility with any one popular standard. For example, some manufacturers designed built-in integrated video display systems, while others relied on separate computer terminals. Serial ports for printers and modems can use different types of UART chips, and port addresses are not fixed. Some machines use memory-mapped I/O instead of
7260-452: The command line. These are referred to as "transient" programs. On completion, BDOS will reload the CCP if it has been overwritten by application programs — this allows transient programs a larger memory space. The commands themselves can sometimes be obscure. For instance, the command to duplicate files is named PIP (Peripheral-Interchange-Program), the name of the old DEC utility used for that purpose. The format of parameters given to
7370-453: The computer's memory. Various methods of memory protection exist, including memory segmentation and paging . All methods require some level of hardware support (such as the 80286 MMU), which does not exist in all computers. In both segmentation and paging, certain protected mode registers specify to the CPU what memory address it should allow a running program to access. Attempts to access other addresses trigger an interrupt, which causes
7480-471: The details of how interrupt service routines behave vary from operating system to operating system. However, several interrupt functions are common. The architecture and operating system must: A software interrupt is a message to a process that an event has occurred. This contrasts with a hardware interrupt — which is a message to the central processing unit (CPU) that an event has occurred. Software interrupts are similar to hardware interrupts — there
7590-403: The disk. From version 1.1 or 1.2 onwards, changing a disk then trying to write to it before its directory is read will cause a fatal error to be signalled. This avoids overwriting the disk but requires a reboot and loss of the data to be stored on disk. The majority of the complexity in CP/M is isolated in the BDOS, and to a lesser extent, the CCP and transient commands. This meant that by porting
7700-422: The environment. Interrupts cause the central processing unit (CPU) to have a control flow change away from the currently running program to an interrupt handler , also known as an interrupt service routine (ISR). An interrupt service routine may cause the central processing unit (CPU) to have a context switch . The details of how a computer processes an interrupt vary from architecture to architecture, and
7810-434: The evolving CP/M-86 line of operating systems. At this point, the original 8-bit CP/M became known by the retronym CP/M-80 to avoid confusion. CP/M-86 was expected to be the standard operating system of the new IBM PCs , but DRI and IBM were unable to negotiate development and licensing terms. IBM turned to Microsoft instead, and Microsoft delivered PC DOS based on 86-DOS . Although CP/M-86 became an option for
7920-532: The following components: The only hardware system that CP/M, as sold by Digital Research, would support was the Intel 8080 Development System. Manufacturers of CP/M-compatible systems customized portions of the operating system for their own combination of installed memory, disk drives, and console devices. CP/M would also run on systems based on the Zilog Z80 processor since the Z80 was compatible with 8080 code. While
8030-410: The hardware checks that the software is only executing legal instructions, whereas the kernel has unrestricted powers and is not subject to these checks. The kernel also manages memory for other processes and controls access to input/output devices. The operating system provides an interface between an application program and the computer hardware, so that an application program can interact with
8140-493: The hardware only by obeying rules and procedures programmed into the operating system. The operating system is also a set of services which simplify development and execution of application programs. Executing an application program typically involves the creation of a process by the operating system kernel , which assigns memory space and other resources, establishes a priority for the process in multi-tasking systems, loads program binary code into memory, and initiates execution of
8250-407: The home market had been largely unsuccessful and most CP/M software was too expensive for home users. In 1986 the magazine stated that Kaypro had stopped production of 8-bit CP/M-based models to concentrate on sales of MS-DOS compatible systems, long after most other vendors had ceased production of new equipment and software for CP/M. CP/M rapidly lost market share as the microcomputing market moved to
8360-418: The indirect pollution of important processor structures (like CPU caches , the instruction pipeline , and so on) which affects both user-mode and kernel-mode performance. The first computers in the late 1940s and 1950s were directly programmed either with plugboards or with machine code inputted on media such as punch cards , without programming languages or operating systems. After the introduction of
8470-404: The interrupt request, the operating system will: When the writing process has its time slice expired, the operating system will: With the program counter now reset, the interrupted process will resume its time slice. Among other things, a multiprogramming operating system kernel must be responsible for managing all system memory which is currently in use by the programs. This ensures that
8580-431: The kernel—and applications—all other software. There are three main purposes that an operating system fulfills: With multiprocessors multiple CPUs share memory. A multicomputer or cluster computer has multiple CPUs, each of which has its own memory . Multicomputers were developed because large multiprocessors are difficult to engineer and prohibitively expensive; they are universal in cloud computing because of
8690-460: The keyboard and conveys results to the terminal. CP/M itself works with either a printing terminal or a video terminal. All CP/M commands have to be typed in on the command line . The console most often displays the A>; prompt, to indicate the current default disk drive. When used with a video terminal, this is usually followed by a blinking cursor supplied by the terminal. The CCP awaits input from
8800-546: The limited number of simple routines in the BIOS to a particular hardware platform, the entire OS would work. This significantly reduced the development time needed to support new machines, and was one of the main reasons for CP/M's widespread use. Today this sort of abstraction is common to most OSs (a hardware abstraction layer ), but at the time of CP/M's birth, OSs were typically intended to run on only one machine platform, and multilayer designs were considered unnecessary. The Console Command Processor, or CCP, accepts input from
8910-480: The lowest address of the BDOS was the Transient Program Area (TPA) available for CP/M application programs. Although all Z80 and 8080 processors could address 64 kilobytes of memory, the amount available for application programs could vary, depending on the design of the particular computer. Some computers used large parts of the address space for such things as BIOS ROMs, or video display memory. As
9020-434: The lowest level functions required by the operating system. These include reading or writing single characters to the system console and reading or writing a sector of data from the disk. The BDOS handles some of the buffering of data from the diskette, but before CP/M 3.0 it assumes a disk sector size fixed at 128 bytes, as used on single-density 8-inch floppy disks. Since most 5.25-inch disk formats use larger sectors,
9130-512: The magazine. Later versions of CP/M-86 made significant strides in performance and usability and were made compatible with MS-DOS. To reflect this compatibility the name was changed, and CP/M-86 became DOS Plus , which in turn became DR-DOS . ZCPR (the Z80 Command Processor Replacement) was introduced on 2 February 1982 as a drop-in replacement for the standard Digital Research console command processor (CCP) and
9240-400: The memory allocated to a different one. Around the same time, teleprinters began to be used as terminals so multiple users could access the computer simultaneously. The operating system MULTICS was intended to allow hundreds of users to access a large computer. Despite its limited adoption, it can be considered the precursor to cloud computing . The UNIX operating system originated as
9350-519: The microcomputer industry. This computer platform was widely used in business through the late 1970s and into the mid-1980s. CP/M increased the market size for both hardware and software by greatly reducing the amount of programming required to port an application to a new manufacturer's computer. An important driver of software innovation was the advent of (comparatively) low-cost microcomputers running CP/M, as independent programmers and hackers bought them and shared their creations in user groups . CP/M
9460-408: The need to use it. A general protection fault would be produced, indicating a segmentation violation had occurred; however, the system would often crash anyway. The use of virtual memory addressing (such as paging or segmentation) means that the kernel can choose what memory each program may use at any given time, allowing the operating system to use the same memory locations for multiple tasks. If
9570-434: The new location of the operating system in processor memory. This newly patched version can then be saved on a new disk, allowing application programs to access the additional memory made available by moving the system components. Once installed, the operating system (BIOS, BDOS and CCP) is stored in reserved areas at the beginning of any disk which can be used to boot the system. On start-up, the bootloader (usually contained in
9680-408: The open-source Android operating system (introduced 2008), with a Linux kernel and a C library ( Bionic ) partially based on BSD code, became most popular. The components of an operating system are designed to ensure that various parts of a computer function cohesively. With the de facto obsoletion of DOS , all user software must interact with the operating system to access hardware. The kernel
9790-448: The operating system because "where there are literally thousands of programs written for it, it would be unwise not to take advantage of it", Xerox said. (Xerox included a Howard W. Sams CP/M manual as compensation for Digital Research's documentation, which InfoWorld described as atrocious, incomplete, incomprehensible, and poorly indexed.) By 1984, Columbia University used the same source code to build Kermit binaries for more than
9900-421: The piping. Signals may be classified into 7 categories. The categories are: Input/output (I/O) devices are slower than the CPU. Therefore, it would slow down the computer if the CPU had to wait for each I/O to finish. Instead, a computer may implement interrupts for I/O completion, avoiding the need for polling or busy waiting. Some computers require an interrupt for each character or word, costing
10010-512: The same disk was never ported to MS-DOS. Since MS-DOS had access to more memory (as few IBM PCs were sold with less than 64 KB of memory, while CP/M could run in 16 KB if necessary), more commands were built into the command-line shell , making MS-DOS somewhat faster and easier to use on floppy-based computers. Although one of the first peripherals for the IBM PC was a SoftCard-like expansion card that let it run 8-bit CP/M software, InfoWorld stated in 1984 that efforts to introduce CP/M to
10120-418: The same operating system— OS/360 —which consisted of millions of lines of assembly language that had thousands of bugs . The OS/360 also was the first popular operating system to support multiprogramming , such that the CPU could be put to use on one job while another was waiting on input/output (I/O). Holding multiple jobs in memory necessitated memory partitioning and safeguards against one job accessing
10230-400: The signal number (in mnemonic format) to be sent. (The abrasive name of kill was chosen because early implementations only terminated the process.) In Unix-like operating systems, signals inform processes of the occurrence of asynchronous events. To communicate asynchronously, interrupts are required. One reason a process needs to asynchronously communicate to another process solves
10340-400: The size of the machine needed. The different CPUs often need to send and receive messages to each other; to ensure good performance, the operating systems for these machines need to minimize this copying of packets . Newer systems are often multiqueue —separating groups of users into separate queues —to reduce the need for packet copying and support more concurrent users. Another technique
10450-510: The standard operating system for 16-bit computers. In 1980 IBM approached Digital Research, at Bill Gates ' suggestion, to license a forthcoming version of CP/M for its new product, the IBM Personal Computer. Upon the failure to obtain a signed non-disclosure agreement , the talks failed, and IBM instead contracted with Microsoft to provide an operating system. The resulting product, MS-DOS , soon began outselling CP/M. Many of
10560-442: The system and may also include accounting software for cost allocation of processor time , mass storage , peripherals, and other resources. For hardware functions such as input and output and memory allocation , the operating system acts as an intermediary between programs and the computer hardware, although the application code is usually executed directly by the hardware and frequently makes system calls to an OS function or
10670-616: The system was started. CP/M used the 7-bit ASCII set. The other 128 characters made possible by the 8-bit byte were not standardized. For example, one Kaypro used them for Greek characters, and Osborne machines used the 8th bit set to indicate an underlined character. WordStar used the 8th bit as an end-of-word marker. International CP/M systems most commonly used the ISO 646 norm for localized character sets, replacing certain ASCII characters with localized characters rather than adding them beyond
10780-411: The user. A CCP internal command, of the form drive letter followed by a colon, can be used to select the default drive. For example, typing B: and pressing enter at the command prompt changes the default drive to B, and the command prompt then becomes B> to indicate this change. CP/M's command-line interface was patterned after the operating systems from Digital Equipment , such as RT-11 for
10890-473: The world. Middleware , an additional software layer between the operating system and applications, is often used to improve consistency. Although it functions similarly to an operating system, it is not a true operating system. Embedded operating systems are designed to be used in embedded computer systems , whether they are internet of things objects or not connected to a network. Embedded systems include many household appliances. The distinguishing factor
11000-710: Was CP/M-68K for the Motorola 68000 . The original version of CP/M-68K in 1982 was written in Pascal/MT+68k , but it was ported to C later on. CP/M-68K, already running on the Motorola EXORmacs systems, was initially to be used in the Atari ST computer, but Atari decided to go with a newer disk operating system called GEMDOS . CP/M-68K was also used on the SORD M68 and M68MX computers. In 1982, there
11110-453: Was able to increase the license to tens of thousands of dollars. Under Kildall's direction, the development of CP/M 2.0 was mostly carried out by John Pierce in 1978. Kathryn Strutynski , a friend of Kildall from Naval Postgraduate School (NPS), became the fourth employee of Digital Research Inc. in early 1979. She started by debugging CP/M 2.0, and later became influential as key developer for CP/M 2.2 and CP/M Plus. Other early developers of
11220-464: Was also a port from CP/M-68K to the 16-bit Zilog Z8000 for the Olivetti M20 , written in C , named CP/M-8000 . These 16-bit versions of CP/M required application programs to be re-compiled for the new CPUs. Some programs written in assembly language could be automatically translated for a new processor. One tool for this was Digital Research's XLT86 , which translated .ASM source code for
11330-762: Was available for the last generation of 8-bit computers, notably the Amstrad PCW, the Amstrad CPC , the ZX Spectrum +3 , the Commodore 128 , MSX machines and the Radio Shack TRS-80 Model 4 . There were versions of CP/M for some 16-bit CPUs as well. The first version in the 16-bit family was CP/M-86 for the Intel 8086 in November 1981. Kathryn Strutynski was the project manager for
11440-444: Was designed by David K. Brown. It incorporated the bank switching memory management of MP/M in a single-user single-task operating system compatible with CP/M 2.2 applications. CP/M 3 could therefore use more than 64 KB of memory on an 8080 or Z80 processor. The system could be configured to support date stamping of files. The operating system distribution software also included a relocating assembler and linker. CP/M 3
11550-467: Was developed and released. ZCPR 3.3 no longer supported the 8080 series of microprocessors, and added the most features of any upgrade in the ZCPR line. ZCPR 3.3 also included a full complement of utilities with considerably extended capabilities. While enthusiastically supported by the CP/M user base of the time, ZCPR alone was insufficient to slow the demise of CP/M. A minimal 8-bit CP/M system would contain
11660-508: Was eventually displaced by DOS following the 1981 introduction of the IBM PC . Gary Kildall originally developed CP/M during 1974, as an operating system to run on an Intel Intellec-8 development system, equipped with a Shugart Associates 8-inch floppy-disk drive interfaced via a custom floppy-disk controller . It was written in Kildall's own PL/M ( Programming Language for Microcomputers ). Various aspects of CP/M were influenced by
11770-426: Was initially written by a group of computer hobbyists who called themselves "The CCP Group". They were Frank Wancho, Keith Petersen (the archivist behind Simtel at the time), Ron Fowler, Charlie Strom, Bob Mathias, and Richard Conn. Richard was, in fact, the driving force in this group (all of whom maintained contact through email). ZCPR1 was released on a disk put out by SIG/M (Special Interest Group/Microcomputers),
11880-562: Was probably the Amstrad PCW . In the UK, CP/M was also available on Research Machines educational computers (with the CP/M source code published as an educational resource), and for the BBC Micro when equipped with a Z80 co-processor. Furthermore, it was available for the Amstrad CPC series, the Commodore 128 , TRS-80 , and later models of the ZX Spectrum . CP/M 3 was also used on
11990-406: Was the first popular computer to use a graphical user interface (GUI). The GUI proved much more user friendly than the text-only command-line interface earlier operating systems had used. Following the success of Macintosh, MS-DOS was updated with a GUI overlay called Windows . Windows later was rewritten as a stand-alone operating system, borrowing so many features from another ( VAX VMS ) that
12100-422: Was written for CP/M than for operating systems that ran on only one brand of hardware. One restriction on portability was that certain programs used the extended instruction set of the Z80 processor and would not operate on an 8080 or 8085 processor. Another was graphics routines, especially in games and graphics programs, which were generally machine-specific as they used direct hardware access for speed, bypassing
#334665