Misplaced Pages

#508491

76-568: The original Compaq Deskpro (released in 1984), available in several disk configurations, is an XT-class PC equipped with an 8 MHz 8086 CPU and Compaq's unique display hardware that combined Color Graphics Adapter graphics with high resolution Monochrome Display Adapter text. As a result, it was considerably faster than the original IBM PC , the XT and the AT , and had a much better quality text display compared to IBM PCs which were equipped with either

152-592: A clean room design with a reverse-engineered BIOS, avoiding legal jeopardy. In 1985, Compaq released the Deskpro 286, their clone of the IBM PC/AT . In September 1986, the Deskpro 386 was announced after Intel released its 80386 microprocessor, beating IBM by seven months on their comparable 386 computer, thus making a name for themselves. The IBM-made 386DX machine, the IBM PS/2 Model 80 , reached

228-756: A computer or other device. The first floppy disks, invented and made by IBM in 1971, had a disk diameter of 8 inches (203.2 mm). Subsequently, the 5¼-inch (133.35 mm) and then the 3½-inch (88.9 mm) became a ubiquitous form of data storage and transfer into the first years of the 21st century. 3½-inch floppy disks can still be used with an external USB floppy disk drive. USB drives for 5¼-inch, 8-inch, and other-size floppy disks are rare to non-existent. Some individuals and organizations continue to use older equipment to read or transfer data from floppy disks. Floppy disks were so common in late 20th-century culture that many electronic and software programs continue to use save icons that look like floppy disks well into

304-411: A magnetic storage medium in a square or nearly square plastic enclosure lined with a fabric that removes dust particles from the spinning disk. The three most popular (and commercially available) floppy disks are the 8-inch, 5¼-inch, and 3½-inch floppy disks. Floppy disks store digital data which can be read and written when the disk is inserted into a floppy disk drive ( FDD ) connected to or inside

380-559: A backplane with eight card slots. It connects to the main system unit using an Extender Card in the system unit and a Receiver Card in the Expansion Unit, connected by a custom cable. The 5161 shipped with a 10 MB hard drive, and had room for a second one. The Expansion Unit can also contain extra memory, but the Extender card inserts wait states for memory in the Expansion Unit, so it may be preferable to install memory into

456-456: A built-in hard drive and extra expansion slots, it is very similar to the original IBM PC model 5150 from 1981. IBM did not specify an expanded form of "XT" on the machine, press releases, brochures or documentation, but some publications expanded the term as " eXtended Technology " or just " eXTended ". The XT was regarded as an incremental improvement over the PC and a disappointment compared to

532-443: A button that, when pressed, ejects the disk with varying degrees of force, the discrepancy due to the ejection force provided by the spring of the shutter. In IBM PC compatibles , Commodores, Apple II/IIIs, and other non-Apple-Macintosh machines with standard floppy disk drives, a disk may be ejected manually at any time. The drive has a disk-change switch that detects when a disk is ejected or inserted. Failure of this mechanical switch

608-650: A customized operating system is used that has no drivers for USB devices. Hardware floppy disk emulators can be made to interface floppy-disk controllers to a USB port that can be used for flash drives. In May 2016, the United States Government Accountability Office released a report that covered the need to upgrade or replace legacy computer systems within federal agencies. According to this document, old IBM Series/1 minicomputers running on 8-inch floppy disks are still used to coordinate "the operational functions of

684-533: A desktop form factor. An SFF ( small form factor ) desktop version was also produced during the Deskpro's lifetime. The Deskpro was replaced by the Evo in 2001. The many different models include the: IBM XT The IBM Personal Computer XT (model 5160, often shortened to PC/XT ) is the second computer in the IBM Personal Computer line, released on March 8, 1983. Except for the addition of

760-428: A disk can be accessed, the drive needs to synchronize its head position with the disk tracks. In some drives, this is accomplished with a Track Zero Sensor, while for others it involves the drive head striking an immobile reference surface. In either case, the head is moved so that it is approaching track zero position of the disk. When a drive with the sensor has reached track zero, the head stops moving immediately and

836-474: A disk, some 3½-inch drives (notably the Macintosh External 400K and 800K drives ) instead use Constant Linear Velocity (CLV), which uses a variable speed drive motor that spins more slowly as the head moves away from the center of the disk, maintaining the same speed of the head(s) relative to the surface(s) of the disk. This allows more sectors to be written to the longer middle and outer tracks as

SECTION 10

#1732772728509

912-413: A hard-sectored disk, there are many holes, one for each sector row, plus an additional hole in a half-sector position, that is used to indicate sector zero. The Apple II computer system is notable in that it did not have an index hole sensor and ignored the presence of hard or soft sectoring. Instead, it used special repeating data synchronization patterns written to the disk between each sector, to assist

988-420: A loaded disk can be removed manually by inserting a straightened paper clip into a small hole at the drive's front panel, just as one would do with a CD-ROM drive in a similar situation. The X68000 has soft-eject 5¼-inch drives. Some late-generation IBM PS/2 machines had soft-eject 3½-inch disk drives as well for which some issues of DOS (i.e. PC DOS 5.02 and higher) offered an EJECT command. Before

1064-557: A recovery. The music and theatre industries still use equipment requiring standard floppy disks (e.g. synthesizers, samplers, drum machines, sequencers, and lighting consoles ). Industrial automation equipment such as programmable machinery and industrial robots may not have a USB interface; data and programs are then loaded from disks, damageable in industrial environments. This equipment may not be replaced due to cost or requirement for continuous availability; existing software emulation and virtualization do not solve this problem because

1140-468: A selectable option and purchasable as an aftermarket OEM add-on. By January 2007, only 2% of computers sold in stores contained built-in floppy disk drives. Floppy disks are used for emergency boots in aging systems lacking support for other bootable media and for BIOS updates, since most BIOS and firmware programs can still be executed from bootable floppy disks . If BIOS updates fail or become corrupt, floppy drives can sometimes be used to perform

1216-505: A single hole in the rotating floppy disk medium line up. This mechanism is used to detect the angular start of each track, and whether or not the disk is rotating at the correct speed. Early 8‑inch and 5¼‑inch disks also had holes for each sector in the enclosed magnetic medium, in addition to the index hole, with the same radial distance from the center, for alignment with the same envelope hole. These were termed hard sectored disks. Later soft- sectored disks have only one index hole in

1292-447: A small circle of floppy magnetic material encased in hard plastic. Earlier types of floppy disks did not have this plastic case, which protects the magnetic material from abuse and damage. A sliding metal cover protects the delicate magnetic surface when the diskette is not in use and automatically opens when the diskette is inserted into the computer. The diskette has a square shape: there are apparently eight possible ways to insert it into

1368-411: A small oblong opening in both sides to allow the drive's heads to read and write data and a large hole in the center to allow the magnetic medium to spin by rotating it from its middle hole. Inside the cover are two layers of fabric with the magnetic medium sandwiched in the middle. The fabric is designed to reduce friction between the medium and the outer cover, and catch particles of debris abraded off

1444-475: Is a common source of disk corruption if a disk is changed and the drive (and hence the operating system) fails to notice. One of the chief usability problems of the floppy disk is its vulnerability; even inside a closed plastic housing, the disk medium is highly sensitive to dust, condensation and temperature extremes. As with all magnetic storage , it is vulnerable to magnetic fields. Blank disks have been distributed with an extensive set of warnings, cautioning

1520-508: Is approximately 19.5 inches (50 cm) wide by 16 inches (41 cm) deep by 5.5 inches (14 cm) high. Similarly to the original IBM PC, the XT main board included a socket for the Intel 8087 floating point arithmetic coprocessor . This optional chip, when installed, greatly accelerated arithmetic for such applications as computer aided design or other software that required large amounts of arithmetical calculations. Only software that

1596-456: Is correctly aligned. For a drive without the sensor, the mechanism attempts to move the head the maximum possible number of positions needed to reach track zero, knowing that once this motion is complete, the head will be positioned over track zero. Some drive mechanisms such as the Apple II 5¼-inch drive without a track zero sensor, produce characteristic mechanical noises when trying to move

SECTION 20

#1732772728509

1672-428: Is still used by software on user-interface elements related to saving files even though physical floppy disks are largely obsolete. Examples of such software include LibreOffice , Microsoft Paint , and WordPad . The 8-inch and 5¼-inch floppy disks contain a magnetically coated round plastic medium with a large circular hole in the center for a drive's spindle. The medium is contained in a square plastic cover that has

1748-551: The Type 1 Diskette in 1973, the industry continued to use the terms "floppy disk" or "floppy". In 1976, Shugart Associates introduced the 5¼-inch floppy disk drive. By 1978, there were more than ten manufacturers producing such drives. There were competing floppy disk formats , with hard- and soft-sector versions and encoding schemes such as differential Manchester encoding (DM), modified frequency modulation (MFM), M FM and group coded recording (GCR). The 5¼-inch format displaced

1824-637: The XT/370 ; they had an additional (co-)processor board that could execute System/370 instructions. An XT-based machine with a Series/1 co-processor board existed as well, but it had its own System Unit number, the IBM 4950 . In 1986, the XT 286 (model 5162) was released with a 6 MHz Intel 80286 processor. Despite being marketed as a lower-tier model than the IBM AT , this system runs many applications faster than

1900-398: The 1990s were non-networked, and floppy disks were the primary means to transfer data between computers, a method known informally as sneakernet . Unlike hard disks, floppy disks were handled and seen; even a novice user could identify a floppy disk. Because of these factors, a picture of a 3½-inch floppy disk became an interface metaphor for saving data. As of 2024 , the floppy disk symbol

1976-469: The 21st century, as a form of skeuomorphic design . While floppy disk drives still have some limited uses, especially with legacy industrial computer equipment , they have been superseded by data storage methods with much greater data storage capacity and data transfer speed , such as USB flash drives , memory cards , optical discs , and storage available through local computer networks and cloud storage . The first commercial floppy disks, developed in

2052-527: The 720 KB double density 3½-inch microfloppy disk on its Convertible laptop computer in 1986 and the 1.44 MB (1,474,560 bytes) high-density version with the IBM Personal System/2 (PS/2) line in 1987. These disk drives could be added to older PC models. In 1988, Y-E Data introduced a drive for 2.88 MB Double-Sided Extended-Density (DSED) diskettes which was used by IBM in its top-of-the-line PS/2 and some RS/6000 models and in

2128-548: The 8-inch one for most uses, and the hard-sectored disk format disappeared. The most common capacity of the 5¼-inch format in DOS-based PCs was 360 KB (368,640 bytes) for the Double-Sided Double-Density (DSDD) format using MFM encoding. In 1984, IBM introduced with its PC/AT the 1.2 MB (1,228,800 bytes) dual-sided 5¼-inch floppy disk, but it never became very popular. IBM started using

2204-450: The ATs of the time with 6 MHz 286 processors, since it has zero- wait state RAM. It shipped with 640 KB RAM standard, an AT-style 1.2 MB high-density diskette drive and a 20 MB hard disk. Despite these features, reviews rated it as a poor market value. The XT 286 uses a 157-watt power supply, which can internally switch between 115 or 230 V AC operation. Both

2280-576: The IBM Model M, but in a modified variant that used the XT's keyboard protocol and lacked LEDs). Submodels 267, 277 and 088 had the original keyboard, but 3.5" floppy drives became available and 20MB Seagate ST-225 hard disks in 5.25" half-height size replaced the full-height 10 MB drives. Submodel 788 was the only XT sold with the Color Graphics Adapter as a standard feature. Submodels 568, 588, and 589 were used as basis for

2356-625: The IBM Monochrome Display Adapter or Color Graphics Adapter cards. Its hardware and BIOS were claimed to be 100% compatible with the IBM PC, like the earlier Compaq Portable . This compatibility had given Compaq the lead over companies like Columbia Data Products , Dynalogic , Eagle Computer and Corona Data Systems . The latter two companies were threatened by IBM for BIOS copyright infringement , and settled out of court, agreeing to re-implement their BIOS. Compaq used

Compaq Deskpro - Misplaced Pages Continue

2432-473: The Sony design, introduced in 1983 by many manufacturers, was then rapidly adopted. By 1988, the 3½-inch was outselling the 5¼-inch. Generally, the term floppy disk persisted, even though later style floppy disks have a rigid case around an internal floppy disk. By the end of the 1980s, 5¼-inch disks had been superseded by 3½-inch disks. During this time, PCs frequently came equipped with drives of both sizes. By

2508-647: The United States' nuclear forces". The government planned to update some of the technology by the end of the 2017 fiscal year. Use in Japan's government ended in 2024. Windows 10 and Windows 11 no longer come with drivers for floppy disk drives (both internal and external). However, they will still support them with a separate device driver provided by Microsoft. The British Airways Boeing 747-400 fleet, up to its retirement in 2020, used 3½-inch floppy disks to load avionics software. Sony, who had been in

2584-558: The XT. The 3270 PC , a variant of the XT featuring 3270 terminal emulation, was released in October 1983. Submodel 068 and 078, released in 1985, offered dual-floppy configurations without a hard drive as well, and the new Enhanced Graphics Adapter and Professional Graphics Adapter became available as video card options. In 1986, the 256–640 KB motherboard models were launched, which switched to half-height drives. Submodels 268, 278 and 089 came with 101-key keyboards (essentially

2660-409: The computer in finding and synchronizing with the data in each track. The later 3½-inch drives of the mid-1980s did not use sector index holes, but instead also used synchronization patterns. Most 3½-inch drives used a constant speed drive motor and contain the same number of sectors across all tracks. This is sometimes referred to as Constant Angular Velocity (CAV). In order to fit more data onto

2736-406: The corresponding sensor; this was mainly a hardware cost-saving measure. The core of the 3½-inch disk is the same as the other two disks, but the front has only a label and a small opening for reading and writing data, protected by the shutter—a spring-loaded metal or plastic cover, pushed to the side on entry into the drive. Rather than having a hole in the center, it has a metal hub which mates to

2812-399: The current is reversed the magnetization aligns in the opposite direction, encoding one bit of data. To read data, the magnetization of the particles in the media induce a tiny voltage in the head coil as they pass under it. This small signal is amplified and sent to the floppy disk controller , which converts the streams of pulses from the media into data, checks it for errors, and sends it to

2888-399: The disk media, an action originally accomplished by a disk-load solenoid. Later drives held the heads out of contact until a front-panel lever was rotated (5¼-inch) or disk insertion was complete (3½-inch). To write data, current is sent through a coil in the head as the media rotates. The head's magnetic field aligns the magnetization of the particles directly below the head on the media. When

2964-442: The disk shell are not quite square: its width is slightly less than its depth, so that it is impossible to insert the disk into a drive slot sideways (i.e. rotated 90 degrees from the correct shutter-first orientation). A diagonal notch at top right ensures that the disk is inserted into the drive in the correct orientation—not upside down or label-end first—and an arrow at top left indicates direction of insertion. The drive usually has

3040-466: The disk to keep them from accumulating on the heads. The cover is usually a one-part sheet, double-folded with flaps glued or spot-welded together. A small notch on the side of the disk identifies whether it is writable, as detected by a mechanical switch or photoelectric sensor . In the 8-inch disk, the notch being covered or not present enables writing, while in the 5¼-inch disk, the notch being present and uncovered enables writing. Tape may be used over

3116-406: The eight ways one might try to insert the diskette, only one is correct, and only that one will fit. An excellent design. A spindle motor in the drive rotates the magnetic medium at a certain speed, while a stepper motor-operated mechanism moves the magnetic read/write heads radially along the surface of the disk. Both read and write operations require the media to be rotating and the head to contact

Compaq Deskpro - Misplaced Pages Continue

3192-692: The existing 3½-inch designs was the SuperDisk in the late 1990s, using very narrow data tracks and a high precision head guidance mechanism with a capacity of 120 MB and backward-compatibility with standard 3½-inch floppies; a format war briefly occurred between SuperDisk and other high-density floppy-disk products, although ultimately recordable CDs/DVDs, solid-state flash storage, and eventually cloud-based online storage would render all these removable disk formats obsolete. External USB -based floppy disk drives are still available, and many modern systems provide firmware support for booting from such drives. In

3268-555: The flexibility of floppy disks combined with greater capacity, but remained niche due to costs. High-capacity backward compatible floppy technologies became popular for a while and were sold as an option or even included in standard PCs, but in the long run, their use was limited to professionals and enthusiasts. Flash-based USB thumb drives finally were a practical and popular replacement, that supported traditional file systems and all common usage scenarios of floppy disks. As opposed to other solutions, no new drive type or special software

3344-457: The floppy disk business since 1983, ended domestic sales of all six 3½-inch floppy disk models as of March 2011. This has been viewed by some as the end of the floppy disk. While production of new floppy disk media has ceased, sales and uses of this media from inventories is expected to continue until at least 2026. For more than two decades, the floppy disk was the primary external writable storage device used. Most computing environments before

3420-512: The general population, floppy disks were often used to store a computer's operating system (OS). Most home computers from that time have an elementary OS and BASIC stored in read-only memory (ROM), with the option of loading a more advanced OS from a floppy disk. By the early 1990s, the increasing software size meant large packages like Windows or Adobe Photoshop required a dozen disks or more. In 1996, there were an estimated five billion standard floppy disks in use. An attempt to enhance

3496-431: The greater capacity, compatibility with existing CD-ROM drives, and—with the advent of re-writeable CDs and packet writing—a similar reusability as floppy disks. However, CD-R/RWs remained mostly an archival medium, not a medium for exchanging data or editing files on the medium itself, because there was no common standard for packet writing which allowed for small updates. Other formats, such as magneto-optical discs , had

3572-407: The heads past the reference surface. This physical striking is responsible for the 5¼-inch drive clicking during the boot of an Apple II, and the loud rattles of its DOS and ProDOS when disk errors occurred and track zero synchronization was attempted. All 8-inch and some 5¼-inch drives used a mechanical method to locate sectors, known as either hard sectors or soft sectors , and is the purpose of

3648-450: The host computer system. A blank unformatted diskette has a coating of magnetic oxide with no magnetic order to the particles. During formatting, the magnetizations of the particles are aligned forming tracks, each broken up into sectors , enabling the controller to properly read and write data. The tracks are concentric rings around the center, with spaces between tracks where no data is written; gaps with padding bytes are provided between

3724-499: The late 1960s, were 8 inches (203.2 mm) in diameter; they became commercially available in 1971 as a component of IBM products and both drives and disks were then sold separately starting in 1972 by Memorex and others. These disks and associated drives were produced and improved upon by IBM and other companies such as Memorex, Shugart Associates , and Burroughs Corporation . The term "floppy disk" appeared in print as early as 1970, and although IBM announced its first media as

3800-424: The machine, only one of which is correct. What happens if I do it wrong? I try inserting the disk sideways. Ah, the designer thought of that. A little study shows that the case really isn't square: it's rectangular, so you can't insert a longer side. I try backward. The diskette goes in only part of the way. Small protrusions, indentations, and cutouts prevent the diskette from being inserted backward or upside down: of

3876-406: The main system unit. The 5161 can be connected to either an XT or to the earlier 5150 (the original IBM PC). PC DOS 2.0 offers a 9-sector floppy disk format, providing 180K/360K (single- vs. dual-sided) capacity per disk, compared to the 160K/320K provided by the 8-sector format of previous releases. The XT was not offered in a floppy-only model for its first two years on the market, although

SECTION 50

#1732772728509

3952-600: The market almost a year later, PC Tech Journal honored the Deskpro 386 with its 1986 Product of the Year award. The Deskpro 386/25 was released in August, 1988 and cost $ 10,299. The form factor for the Compaq Deskpro is mostly the desktop model which lies upon a desk, with a monitor placed on top of it. Compaq has produced many tower upright models that have been highly successful in sales, and are usually convertible to

4028-399: The media. In some 5¼-inch drives, insertion of the disk compresses and locks an ejection spring which partially ejects the disk upon opening the catch or lever. This enables a smaller concave area for the thumb and fingers to grasp the disk during removal. Newer 5¼-inch drives and all 3½-inch drives automatically engage the spindle and heads when a disk is inserted, doing the opposite with

4104-400: The medium, and sector position is determined by the disk controller or low-level software from patterns marking the start of a sector. Generally, the same drives are used to read and write both types of disks, with only the disks and controllers differing. Some operating systems using soft sectors, such as Apple DOS , do not use the index hole, and the drives designed for such systems often lack

4180-493: The mid-1990s, 5¼-inch drives had virtually disappeared, as the 3½-inch disk became the predominant floppy disk. The advantages of the 3½-inch disk were its higher capacity, its smaller physical size, and its rigid case which provided better protection from dirt and other environmental risks. Floppy disks became commonplace during the 1980s and 1990s in their use with personal computers to distribute software, transfer data, and create backups . Before hard disks became affordable to

4256-485: The mid-1990s, mechanically incompatible higher-density floppy disks were introduced, like the Iomega Zip disk . Adoption was limited by the competition between proprietary formats and the need to buy expensive drives for computers where the disks would be used. In some cases, failure in market penetration was exacerbated by the release of higher-capacity versions of the drive and media being not backward-compatible with

4332-490: The next-generation successor that some had anticipated. Compared to the original IBM PC, the XT has the following major differences: Otherwise the specifications are identical to the original PC. The number of expansion slots in the original IBM PC was a limiting factor for the product, since essential components (such as the video controller, disk controller and printer interface) each came as separate expansion cards and could quickly fill up all five available slots, requiring

4408-526: The notch to change the mode of the disk. Punch devices were sold to convert read-only 5¼" disks to writable ones, and also to enable writing on the unused side of single-sided disks for computers with single-sided drives. The latter worked because single- and double-sided disks typically contained essentially identical actual magnetic media, for manufacturing efficiency. Disks whose obverse and reverse sides were thus used separately in single-sided drives were known as flippy disks . Disk notching 5¼" floppies for PCs

4484-485: The old format, including a rigid case with a sliding metal (or later, sometimes plastic) shutter over the head slot, which helped protect the delicate magnetic medium from dust and damage, and a sliding write protection tab, which was far more convenient than the adhesive tabs used with earlier disks. The large market share of the well-established 5¼-inch format made it difficult for these diverse mutually-incompatible new formats to gain significant market share. A variant on

4560-418: The original PC, the amount of physical space in the chassis differs, so two of the new slots (located behind the hard drive) cannot accept full-length cards. In addition, the spacing of the slots is narrower than in the original PC, making it impossible to install some multi-board cards. The 5161 is an expansion chassis using an identical case and power supply to the XT, but instead of a system board, provides

4636-644: The original XT and the XT/286 was discontinued in late 1987 after the launch of the IBM Personal System/2 (PS/2) line. The 8086-powered IBM PS/2 Model 30 served as the direct replacement for the XT in that PS/2 line. Unlike higher-end entries in the PS/2 line, which feature the Micro Channel expansion bus, the Model 30 contains 8-bit ISA bus slots, exactly like the XT. The XT was well received, although PC DOS 2.0

SECTION 60

#1732772728509

4712-492: The original drives, dividing the users between new and old adopters. Consumers were wary of making costly investments into unproven and rapidly changing technologies, so none of the technologies became the established standard. Apple introduced the iMac G3 in 1998 with a CD-ROM drive but no floppy drive; this made USB-connected floppy drives popular accessories, as the iMac came without any writable removable media device. Recordable CDs were touted as an alternative, because of

4788-409: The press of the eject button. On Apple Macintosh computers with built-in 3½-inch disk drives, the ejection button is replaced by software controlling an ejection motor which only does so when the operating system no longer needs to access the drive. The user could drag the image of the floppy drive to the trash can on the desktop to eject the disk. In the case of a power failure or drive malfunction,

4864-403: The read operation; other errors are permanent and the disk controller will signal a failure to the operating system if multiple attempts to read the data still fail. After a disk is inserted, a catch or lever at the front of the drive is manually lowered to prevent the disk from accidentally emerging, engage the spindle clamping hub, and in two-sided drives, engage the second read/write head with

4940-651: The second-generation NeXTcube and NeXTstation ; however, this format had limited market success due to lack of standards and movement to 1.44 MB drives. Throughout the early 1980s, limits of the 5¼-inch format became clear. Originally designed to be more practical than the 8-inch format, it was becoming considered too large; as the quality of recording media grew, data could be stored in a smaller area. Several solutions were developed, with drives at 2-, 2½-, 3-, 3¼-, 3½- and 4-inches (and Sony 's 90 mm × 94 mm (3.54 in × 3.70 in) disk) offered by various companies. They all had several advantages over

5016-502: The sectors and at the end of the track to allow for slight speed variations in the disk drive, and to permit better interoperability with disk drives connected to other similar systems. Each sector of data has a header that identifies the sector location on the disk. A cyclic redundancy check (CRC) is written into the sector headers and at the end of the user data so that the disk controller can detect potential errors. Some errors are soft and can be resolved by automatically re-trying

5092-413: The small hole in the jacket, off to the side of the spindle hole. A light beam sensor detects when a punched hole in the disk is visible through the hole in the jacket. For a soft-sectored disk, there is only a single hole, which is used to locate the first sector of each track. Clock timing is then used to find the other sectors behind it, which requires precise speed regulation of the drive motor. For

5168-408: The spindle of the drive. Typical 3½-inch disk magnetic coating materials are: Two holes at the bottom left and right indicate whether the disk is write-protected and whether it is high-density; these holes are spaced as far apart as the holes in punched A4 paper, allowing write-protected high-density floppy disks to be clipped into international standard ( ISO 838 ) ring binders . The dimensions of

5244-520: The standard ribbon cable with two floppy connectors was still included. At that time, in order to get a second floppy drive, the user had to purchase the 5161 expansion chassis. Like the original PC, the XT came with IBM BASIC in ROM . The XT BIOS also displays a memory count during the POST , unlike the original PC. The XT has a desktop case similar to that of the IBM PC. It weighs 32 pounds (15 kg) and

5320-442: The user not to expose it to dangerous conditions. Rough treatment or removing the disk from the drive while the magnetic media is still spinning is likely to cause damage to the disk, drive head, or stored data. On the other hand, the 3½‑inch floppy disk has been lauded for its mechanical usability by human–computer interaction expert Donald Norman : A simple example of a good design is the 3½-inch magnetic diskette for computers,

5396-403: The user to swap cards in and out as tasks demanded. Some PC clones addressed this problem by integrating components into the motherboard to free up slots, while peripheral manufacturers produced products which integrated multiple functions into one card. The XT addressed the problem by adding three extra expansion slots for a total of eight. While the slots themselves are identical to those in

5472-466: Was especially written to take advantage of the coprocessor would show a significant speedup. The power supply is 130 watts, an upgrade from the original PC. Those sold in the US were configured for 120 V AC only and could not be used with 240 V mains supplies. XTs with 240 V-compatible power supplies were later sold in international markets. Both were rated at 130 watts. IBM made several submodels of

5548-409: Was generally only required where users wanted to overwrite original 5¼" disks of store-bought software, which somewhat commonly shipped with no notch present. Another LED/photo-transistor pair located near the center of the disk detects the index hole once per rotation in the magnetic disk. Detection occurs whenever the drive's sensor, the holes in the correctly inserted floppy's plastic envelope and

5624-468: Was little financial incentive to omit the device from a system. Subsequently, enabled by the widespread support for USB flash drives and BIOS boot, manufacturers and retailers progressively reduced the availability of floppy disk drives as standard equipment. In February 2003, Dell , one of the leading personal computer vendors, announced that floppy drives would no longer be pre-installed on Dell Dimension home computers, although they were still available as

5700-469: Was regarded as a greater improvement than any of the hardware changes, and by the end of 1983 IBM was selling every unit they made. By 1985 the IBM PC AT made the XT obsolete for most customers. Photo galleries: Floppy disk A floppy disk or floppy diskette (casually referred to as a floppy , a diskette , or a disk ) is a type of disk storage composed of a thin and flexible disk of

5776-443: Was required that impeded adoption, since all that was necessary was an already common USB port . By 2002, most manufacturers still provided floppy disk drives as standard equipment to meet user demand for file-transfer and an emergency boot device, as well as for the general secure feeling of having the familiar device. By this time, the retail cost of a floppy drive had fallen to around $ 20 (equivalent to $ 34 in 2023), so there

#508491