Misplaced Pages

Canon EOS-1D Mark IV

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.

Image resolution is the level of detail of an image . The term applies to digital images, film images, and other types of images. "Higher resolution" means more image detail. Image resolution can be measured in various ways. Resolution quantifies how close lines can be to each other and still be visibly resolved . Resolution units can be tied to physical sizes (e.g. lines per mm, lines per inch), to the overall size of a picture (lines per picture height, also known simply as lines, TV lines, or TVL), or to angular subtense. Instead of single lines, line pairs are often used, composed of a dark line and an adjacent light line; for example, a resolution of 10 lines per millimeter means 5 dark lines alternating with 5 light lines, or 5 line pairs per millimeter (5 LP/mm). Photographic lens are most often quoted in line pairs per millimeter.

#452547

64-524: The EOS-1D Mark IV is a professional 16.1 effective megapixels digital single lens reflex camera (DSLR) camera body produced by Canon . The EOS-1D Mark IV is the successor of the Canon EOS-1D Mark III and was announced on 20 October 2009, just four days after Nikon announced the D3s . It used to be the only Canon APS-H format DSLR to feature HD video recording at 1080p resolution. It

128-455: A | Cinema EOS C | high resolution camera S | no AA filter effect R   ⋅   FIRMWARE ADD-ON: x Magic Lantern Support See also: Canon EOS film cameras , Canon EOS mirrorless cameras Effective pixels The resolution of digital cameras can be described in many different ways. The term resolution is often considered equivalent to pixel count in digital imaging , though international standards in

192-403: A Bayer filter mosaic, or three separate image sensors (one each for the primary additive colors red, green, and blue) which are exposed to the same image via a beam splitter (see Three-CCD camera ). Multi-shot exposes the sensor to the image in a sequence of three or more openings of the lens aperture . There are several methods of application of the multi-shot technique. The most common

256-407: A 3.1-megapixel image. The image would be a very low quality image (72ppi) if printed at about 28.5 inches wide, but a very good quality (300ppi) image if printed at about 7 inches wide. The number of photodiodes in a color digital camera image sensor is often a multiple of the number of pixels in the image it produces, because information from an array of color image sensors is used to reconstruct

320-413: A Bayer filter on the chip. The third method is called scanning because the sensor moves across the focal plane much like the sensor of an image scanner . The linear or tri-linear sensors in scanning cameras utilize only a single line of photosensors, or three lines for the three colors. Scanning may be accomplished by moving the sensor (for example, when using color co-site sampling ) or by rotating

384-484: A considerable depth up to 100 feet (30 m); others only 10 feet (3 m), but only a few will float. Ruggeds often lack some of the features of ordinary compact camera, but they have video capability and the majority can record sound. Most have image stabilization and built-in flash. Touchscreen LCD and GPS do not work underwater. GoPro and other brands offer action cameras that are rugged, small, and can be easily attached to helmets , arms, bicycles, etc. Most have

448-483: A controlled amount of light to the image, just as with film, but the image pickup device is electronic rather than chemical. However, unlike film cameras, digital cameras can display images on a screen immediately after being recorded, and store and delete images from memory . Many digital cameras can also record moving videos with sound . Some digital cameras can crop and stitch pictures and perform other kinds of image editing . The first semiconductor image sensor

512-429: A digital camera is often limited by the image sensor that turns light into discrete signals. The brighter the image at a given point on the sensor, the larger the value that is read for that pixel. Depending on the physical structure of the sensor, a color filter array may be used, which requires demosaicing to recreate a full-color image . The number of pixels in the sensor determines the camera's " pixel count ". In

576-588: A frame of 35 mm film. Common values for field of view crop in DSLRs using active pixel sensors include 1.3x for some Canon (APS-H) sensors, 1.5x for Sony APS-C sensors used by Nikon, Pentax and Konica Minolta and for Fujifilm sensors, 1.6 (APS-C) for most Canon sensors, ~1.7x for Sigma 's Foveon sensors and 2x for Kodak and Panasonic 4/3-inch sensors currently used by Olympus and Panasonic. Crop factors for non-SLR consumer compact and bridge cameras are larger, frequently 4x or more. The resolution of

640-403: A full array of RGB image data. Cameras that use a beam-splitter single-shot 3CCD approach, three-filter multi-shot approach, color co-site sampling or Foveon X3 sensor do not use anti-aliasing filters, nor demosaicing. Firmware in the camera, or a software in a raw converter program such as Adobe Camera Raw , interprets the raw data from the sensor to obtain a full-color image, because

704-484: A larger sensor including, at the high end, a pricey full-frame sensor compact camera, such as Sony Cyber-shot DSC-RX1 , but have capability near that of a DSLR. A variety of additional features are available depending on the model of the camera. Such features include GPS , compass, barometers and altimeters . Starting in 2010, some compact digital cameras can take 3D still photos. These 3D compact stereo cameras can capture 3D panoramic photos with dual lens or even

SECTION 10

#1732794386453

768-401: A much higher cost. Autofocus systems in compact digital cameras generally are based on a contrast-detection methodology using the image data from the live preview feed of the main imager. Some compact digital cameras use a hybrid autofocus system similar to what is commonly available on DSLRs. Typically, compact digital cameras incorporate a nearly silent leaf shutter into the lens but play

832-421: A particle's coordinates imposed by the measurement or existence of information regarding its momentum to any degree of precision. This fundamental limitation can, in turn, be a factor in the maximum imaging resolution at subatomic scales, as can be encountered using scanning electron microscopes . Radiometric resolution determines how finely a system can represent or distinguish differences of intensity , and

896-488: A photo affects the quality of the image, as high ISO settings equate to an image that is less sharp due to the increased amount of noise allowed into the image, along with too little noise, which can also produce an image that is not sharp. Since the first digital backs were introduced, there have been three main methods of capturing the image, each based on the hardware configuration of the sensor and color filters. Single-shot capture systems use either one sensor chip with

960-416: A retractable lens assembly that provides optical zoom. In most models, an auto-actuating lens cover protects the lens from elements. Most ruggedized or water-resistant models do not retract, and most with superzoom capability do not retract fully. Compact cameras are usually designed to be easy to use . Almost all include an automatic mode, or "auto mode", which automatically makes all camera settings for

1024-407: A simulated camera sound for skeuomorphic purposes. For low cost and small size, these cameras typically use image sensor formats with a diagonal between 6 and 11 mm, corresponding to a crop factor between 7 and 4. This gives them weaker low-light performance, greater depth of field , generally closer focusing ability, and smaller components than cameras using larger sensors. Some cameras use

1088-548: A single lens for playback on a 3D TV . In 2013, Sony released two add-on camera models without display, to be used with a smartphone or tablet, controlled by a mobile application via WiFi. Rugged compact cameras typically include protection against submersion, hot and cold conditions, shock, and pressure. Terms used to describe such properties include waterproof, freeze-proof, heatproof, shockproof, and crushproof, respectively. Nearly all major camera manufacturers have at least one product in this category. Some are waterproof to

1152-407: A smaller sensor is used, as in most digicams, the field of view is cropped by the sensor to smaller than the 35 mm full-frame format's field of view. This narrowing of the field of view may be described as crop factor, a factor by which a longer focal length lens would be needed to get the same field of view on a 35 mm film camera. Full-frame digital SLRs utilize a sensor of the same size as

1216-443: A typical sensor, the pixel count is the product of the number of rows and the number of columns. Pixels are square and is often equal to 1 , for example, a 1,000 by 1,000-pixel sensor would have 1,000,000 pixels, or 1 megapixel . On full-frame sensors (i.e., 24 mm 36 mm), some cameras propose images with 20–25 million pixels that were captured by 7.5–m photosites , or a surface that is 50 times larger.   Digital cameras come in

1280-590: A wide angle and fixed focus and can take still pictures and video, typically with sound. The 360-degree camera can take picture or video 360 degrees using two lenses back-to-back and shooting at the same time. Some of the cameras are Ricoh Theta S, Nikon Keymission 360 and Samsung Gear 360. Nico360 was launched in 2016 and claimed as the world's smallest 360-degree camera with size 46 x 46 x 28 mm (1.8 x 1.8 x 1.1 in) and price less than $ 200. With virtual reality mode built-in stitching, Wifi, and Bluetooth, live streaming can be done. Due to it also being water resistant,

1344-442: A wide range of sizes, prices, and capabilities. In addition to general-purpose digital cameras, specialized cameras including multispectral imaging equipment and astrographs are used for scientific, military, medical, and other special purposes. Compact cameras are intended to be portable (pocketable) and are particularly suitable for casual " snapshots ". Point-and-shoot cameras usually fall under this category. Many incorporate

SECTION 20

#1732794386453

1408-480: Is a factor of multiple systems throughout the DSLR camera by its ISO , resolution, lens, and the lens settings, the environment of the image, and its post-processing. Images have a possibility of being too sharp, but they can never be too in focus. A digital camera resolution is determined by a digital sensor. The digital sensor indicates a high level of sharpness can be produced through the amount of noise and grain that

1472-476: Is a list of traditional, analogue horizontal resolutions for various media. The list only includes popular formats, not rare formats, and all values are approximate, because the actual quality can vary machine-to-machine or tape-to-tape. For ease-of-comparison, all values are for the NTSC system. (For PAL systems, replace 480 with 576.) Analog formats usually had less chroma resolution. Many cameras and displays offset

1536-436: Is almost always used to frame the photo on an integrated LCD. In addition to being able to take still photographs almost all compact cameras have the ability to record video . Compacts often have macro capability and zoom lenses , but the zoom range (up to 30x) is generally enough for candid photography but less than is available on bridge cameras (more than 60x), or the interchangeable lenses of DSLR cameras available at

1600-474: Is an illustration of how the same image might appear at different pixel resolutions, if the pixels were poorly rendered as sharp squares (normally, a smooth image reconstruction from pixels would be preferred, but for illustration of pixels, the sharp squares make the point better). [REDACTED] An image that is 2048 pixels in width and 1536 pixels in height has a total of 2048×1536 = 3,145,728 pixels or 3.1 megapixels. One could refer to it as 2048 by 1536 or

1664-491: Is called spatial resolution, and it depends on properties of the system creating the image, not just the pixel resolution in pixels per inch (ppi). For practical purposes the clarity of the image is decided by its spatial resolution, not the number of pixels in an image. In effect, spatial resolution is the number of independent pixel values per unit length. The spatial resolution of consumer displays ranges from 50 to 800 pixel lines per inch. With scanners, optical resolution

1728-545: Is sometimes used to distinguish spatial resolution from the number of pixels per inch. In remote sensing , spatial resolution is typically limited by diffraction , as well as by aberrations, imperfect focus, and atmospheric distortion. The ground sample distance (GSD) of an image, the pixel spacing on the Earth's surface, is typically considerably smaller than the resolvable spot size. In astronomy , one often measures spatial resolution in data points per arcsecond subtended at

1792-435: Is the precision of a measurement with respect to time. Movie cameras and high-speed cameras can resolve events at different points in time. The time resolution used for movies is usually 24 to 48 frames per second (frames/s), whereas high-speed cameras may resolve 50 to 300 frames/s, or even more. The Heisenberg uncertainty principle describes the fundamental limit on the maximum spatial resolution of information about

1856-749: Is to describe the pixel resolution with the set of two positive integer numbers, where the first number is the number of pixel columns (width) and the second is the number of pixel rows (height), for example as 7680 × 6876 . Another popular convention is to cite resolution as the total number of pixels in the image, typically given as number of megapixels , which can be calculated by multiplying pixel columns by pixel rows and dividing by one million. Other conventions include describing pixels per length unit or pixels per area unit, such as pixels per inch or per square inch. None of these pixel resolutions are true resolutions , but they are widely referred to as such; they serve as upper bounds on image resolution. Below

1920-421: Is tolerated through the lens of the camera. Resolution within the field of digital stills and digital movies is indicated through the camera's ability to determine detail based on the distance, which is then measured by frame size, pixel type, number, and organization. Although some DSLR cameras have limited resolutions, it is almost impossible to not have the proper sharpness for an image. The ISO choice when taking

1984-430: Is usually expressed as a number of levels or a number of bits , for example 8 bits or 256 levels that is typical of computer image files. The higher the radiometric resolution, the better subtle differences of intensity or reflectivity can be represented, at least in theory. In practice, the effective radiometric resolution is typically limited by the noise level, rather than by the number of bits of representation. This

Canon EOS-1D Mark IV - Misplaced Pages Continue

2048-504: The Landsat 1 satellite's multispectral scanner (MSS) started taking digital images of Earth. The MSS, designed by Virginia Norwood at Hughes Aircraft Company starting in 1969, captured and transmitted image data from green, red, and two infrared bands with 6 bits per channel, using a mechanical rocking mirror and an array of 24 detectors. Operating for six years, it transmitted more than 300,000 digital photographs of Earth while orbiting

2112-548: The RGB color model requires three intensity values for each pixel: one each for the red, green, and blue (other color models, when used, also require three or more values per pixel). A single sensor element cannot simultaneously record these three intensities, so a color filter array (CFA) must be used to selectively filter a particular color for each pixel. The Bayer filter pattern is a repeating 2x2 mosaic pattern of light filters, with green ones at opposite corners and red and blue in

2176-436: The digital camera field specify it should instead be called "Number of Total Pixels" in relation to image sensors, and as "Number of Recorded Pixels" for what is fully captured. Hence, CIPA DCG-001 calls for notation such as "Number of Recorded Pixels 1000 × 1500". According to the same standards, the "Number of Effective Pixels" that an image sensor or digital camera has is the count of pixel sensors that contribute to

2240-410: The image sensor that turns light into discrete signals. The brighter the image at a given point on the sensor, the larger the value that is read for that pixel. Depending on the physical structure of the sensor, a color filter array may be used, which requires demosaicing to recreate a full-color image . The number of pixels in the sensor determines the camera's " pixel count ". In a typical sensor,

2304-536: The "Still Video Floppy", or "SVF". The Canon RC-701, introduced in May 1986, was the first SVF camera (and the first electronic SLR camera) sold in the US. It employed an SLR viewfinder, included a 2/3" format color CCD sensor with 380K pixels, and was sold along with a removable 11-66mm and 50-150mm zoom lens.   Over the next few years, many other companies began selling SVF cameras. These analog electronic cameras included

2368-646: The FUJIX DS-X, the first fully digital camera to be commercially released. In 1996, Toshiba 's 40 MB flash memory card was adopted for several digital cameras. The first commercial camera phone was the Kyocera Visual Phone VP-210, released in Japan in May 1999. It was called a "mobile videophone" at the time, and had a 110,000- pixel front-facing camera . It stored up to 20 JPEG digital images , which could be sent over e-mail, or

2432-490: The Jet Propulsion Laboratory was thinking about how to use a mosaic photosensor to capture digital images. His idea was to take pictures of the planets and stars while travelling through space to give information about the astronauts' position. As with Texas Instruments employee Willis Adcock's filmless camera (US patent 4,057,830) in 1972, the technology had yet to catch up with the concept. In 1972,

2496-468: The Nico360 can be used as action camera. There are tend that action cameras have capabilities to shoot 360 degrees with at least 4K resolution. Bridge cameras physically resemble DSLRs, and are sometimes called DSLR-shape or DSLR-like. They provide some similar features but, like compacts, they use a fixed lens and a small sensor. Some compact cameras have also PSAM mode. Most use live preview to frame

2560-615: The Nikon QV-1000C, which had an SLR viewfinder and a 2/3" format monochrome CCD sensor with 380K pixels and recorded analog black-and-white images on a Still Video Floppy. At Photokina 1988, Fujifilm introduced the FUJIX DS-1P, the first fully digital camera, which recorded digital images using a semiconductor memory card . The camera's memory card had a capacity of 2 MB of SRAM (static random-access memory) and could hold up to ten photographs. In 1989, Fujifilm released

2624-416: The beginning of the 21st century made single-shot cameras almost completely dominant, even in high-end commercial photography. Most current consumer digital cameras use a Bayer filter mosaic in combination with an optical anti-aliasing filter to reduce the aliasing due to the reduced sampling of the different primary-color images. A demosaicing algorithm is used to interpolate color information to create

Canon EOS-1D Mark IV - Misplaced Pages Continue

2688-509: The camera used a silicon diode vidicon tube detector, which was cooled using dry ice to reduce dark current, allowing exposure times of up to one hour.    The Cromemco Cyclops was an all-digital camera introduced as a commercial product in 1975. Its design was published as a hobbyist construction project in the February 1975 issue of Popular Electronics magazine. It used a 32×32 metal–oxide–semiconductor (MOS) image sensor, which

2752-434: The color components relative to each other or mix up temporal with spatial resolution: Digital camera A digital camera , also called a digicam , is a camera that captures photographs in digital memory . Most cameras produced today are digital, largely replacing those that capture images on photographic film or film stock . Digital cameras are now widely incorporated into mobile devices like smartphones with

2816-575: The color of a single pixel. The image has to be interpolated or demosaiced to produce all three colors for each output pixel. The terms blurriness and sharpness are used for digital images but other descriptors are used to reference the hardware capturing and displaying the images. Spatial resolution in radiology is the ability of the imaging modality to differentiate two objects. Low spatial resolution techniques will be unable to differentiate between two objects that are relatively close together. The measure of how closely lines can be resolved in an image

2880-413: The final image (including pixels not in said image but nevertheless support the image filtering process), as opposed to the number of total pixels , which includes unused or light-shielded pixels around the edges. An image of N pixels height by M pixels wide can have any resolution less than N lines per picture height, or N TV lines. But when the pixel counts are referred to as "resolution", the convention

2944-408: The hardware capturing and displaying the images. Spectral resolution is the ability to resolve spectral features and bands into their separate components. Color images distinguish light of different spectra . Multispectral images can resolve even finer differences of spectrum or wavelength by measuring and storing more than the traditional 3 of common RGB color images. Temporal resolution (TR)

3008-442: The latter (although more difficult to achieve) is key to visualizing how individual atoms interact. In Stereoscopic 3D images, spatial resolution could be defined as the spatial information recorded or captured by two viewpoints of a stereo camera (left and right camera). Pixel encoding limits the information stored in a digital image, and the term color profile is used for digital images but other descriptors are used to reference

3072-412: The number of remaining photos in free space, postponing the exhaustion of space storage, which is of use where no further data storage device is available and for captures of lower significance, where the benefit from less space storage consumption outweighs the disadvantage from reduced detail. An image's sharpness is presented through the crisp detail, defined lines, and its depicted contrast. Sharpness

3136-513: The other two positions. The high proportion of green takes advantage of the properties of the human visual system, which determines brightness mostly from green and is far more sensitive to brightness than to hue or saturation. Sometimes a 4-color filter pattern is used, often involving two different hues of green. This provides potentially more accurate color, but requires a slightly more complicated interpolation process. The color intensity values not captured for each pixel can be interpolated from

3200-513: The phone could send up to two images per second over Japan's Personal Handy-phone System (PHS) cellular network . The Samsung SCH-V200, released in South Korea in June 2000, was also one of the first phones with a built-in camera. It had a TFT liquid-crystal display (LCD) and stored up to 20 digital photos at 350,000-pixel resolution. However, it could not send the resulting image over

3264-435: The pixel count is the product of the number of rows and the number of columns. For example, a 1,000 by 1,000-pixel sensor would have 1,000,000 pixels, or 1 megapixel . Firmwares' resolution selector allows the user to optionally lower the resolution to reduce the file size per picture and extend lossless digital zooming . The bottom resolution option is typically 640×480 pixels (0.3 megapixels). A lower resolution extends

SECTION 50

#1732794386453

3328-403: The pixels, while each pixel in a CMOS active-pixel sensor has its own amplifier. Compared to CCDs, CMOS sensors use less power. Cameras with a small sensor use a back-side-illuminated CMOS (BSI-CMOS) sensor. The image processing capabilities of the camera determine the outcome of the final image quality much more than the sensor type. The resolution of a digital camera is often limited by

3392-444: The planet about 14 times per day. Also in 1972, Thomas McCord from MIT and James Westphal from Caltech together developed a digital camera for use with telescopes . Their 1972 "photometer-digitizer system " used an analog-to-digital converter and a digital frame memory to store 256 x 256-pixel images of planets and stars, which were then recorded on digital magnetic tape.  CCD sensors were not yet commercially available, and

3456-585: The point of observation, because the physical distance between objects in the image depends on their distance away and this varies widely with the object of interest. On the other hand, in electron microscopy , line or fringe resolution is the minimum separation detectable between adjacent parallel lines (e.g. between planes of atoms), whereas point resolution is instead the minimum separation between adjacent points that can be both detected and interpreted e.g. as adjacent columns of atoms, for instance. The former often helps one detect periodicity in specimens, whereas

3520-401: The same or more capabilities and features of dedicated cameras. High-end, high-definition dedicated cameras are still commonly used by professionals and those who desire to take higher-quality photographs. Digital and digital movie cameras share an optical system, typically using a lens with a variable diaphragm to focus light onto an image pickup device. The diaphragm and shutter admit

3584-634: The telephone function but required a computer connection to access photos. The first mass-market camera phone was the J-SH04 , a Sharp J-Phone model sold in Japan in November 2000. It could instantly transmit pictures via cell phone telecommunication. By the mid-2000s, higher-end cell phones had an integrated digital camera, and by the early 2010s, almost all smartphones had an integrated digital camera. The two major types of digital image sensors are CCD and CMOS. A CCD sensor has one amplifier for all

3648-418: The user. Some also have manual controls. Compact digital cameras typically contain a small sensor that trades-off picture quality for compactness and simplicity; images can usually only be stored using lossy compression (JPEG). Most have a built-in flash usually of low power, sufficient for nearby subjects. A few high-end compact digital cameras have a hotshoe for connecting to an external flash. Live preview

3712-421: The values of adjacent pixels which represent the color being calculated. Cameras with digital image sensors that are smaller than the typical 35 mm film size have a smaller field or angle of view when used with a lens of the same focal length . This is because the angle of view is a function of both focal length and the sensor or film size used. The crop factor is relative to the 35mm film format . If

3776-636: The whole camera. A digital rotating line camera offers images consisting of a total resolution that is very high. The choice of method for a given capture is determined largely by the subject matter. It is usually inappropriate to attempt to capture a subject that moves with anything but a single-shot system. However, the higher color fidelity and larger file sizes and resolutions that are available with multi-shot and scanning backs make them more attractive for commercial photographers who are working with stationary subjects and large-format photographs. Improvements in single-shot cameras and image file processing at

3840-436: Was a modified MOS dynamic RAM ( DRAM ) memory chip . Steven Sasson , an engineer at Eastman Kodak , built a self-contained electronic camera that used a monochrome Fairchild CCD image sensor in 1975. Around the same time, Fujifilm began developing CCD technology in the 1970s. Early uses were mainly military and scientific, followed by medical and news applications. The first filmless SLR (single lens reflex) camera

3904-805: Was discontinued in mid-2012 with the introduction of the Canon EOS-1D X , which replaced both the EOS-1D Mk IV and the EOS-1Ds Mk III . It received a Gold Award from Digital Photography Review. PROCESSOR : Non-DIGIC | DIGIC | DIGIC II | DIGIC III | DIGIC 4 / 4+ | DIGIC 5 / 5+ | DIGIC 6 / 6+ | DIGIC 7 | DIGIC 8 | DIGIC X VIDEO: 720p | 1080p | Uncompressed 1080p | 4K | 5.5K | 8K   ⋅   SCREEN : Flip (tilt) , Articulating , Touchscreen   ⋅   BODY FEATURE: Weather Sealed SPECIALTY MODELS: Astrophotography

SECTION 60

#1732794386453

3968-453: Was originally to use a single image sensor with three filters passed in front of the sensor in sequence to obtain the additive color information. Another multiple-shot method is called microscanning . This method uses a single sensor chip with a Bayer filter and physically moves the sensor on the focus plane of the lens to construct a higher resolution image than the native resolution of the chip. A third version combines these two methods without

4032-468: Was publicly demonstrated by Sony in August 1981. The Sony "Mavica" (magnetic still video camera ) used a color-striped 2/3" format CCD sensor with 280K pixels, along with analogue video signal processing and recording. The Mavica electronic still camera recorded FM-modulated analog video signals on a newly developed 2" magnetic floppy disk, dubbed the "Mavipak". The disk format was later standardized as

4096-559: Was the charge-coupled device (CCD), invented by Willard S. Boyle and George E. Smith at Bell Labs in 1969, based on MOS capacitor technology. The NMOS active-pixel sensor was later invented by Tsutomu Nakamura 's team at Olympus in 1985, which led to the development of the CMOS active-pixel sensor (CMOS sensor) at the NASA Jet Propulsion Laboratory in 1993. In the 1960s, Eugene F. Lally of

#452547