Misplaced Pages

#695304

141-783: ARM (stylised in lowercase as arm , formerly an acronym for Advanced RISC Machines and originally Acorn RISC Machine ) is a family of RISC instruction set architectures (ISAs) for computer processors . Arm Holdings develops the ISAs and licenses them to other companies, who build the physical devices that use the instruction set. It also designs and licenses cores that implement these ISAs. Due to their low costs, low power consumption, and low heat generation, ARM processors are useful for light, portable, battery-powered devices, including smartphones , laptops , and tablet computers , as well as embedded systems . However, ARM processors are also used for desktops and servers , including Fugaku ,

282-606: A Harvard memory model , where the instruction stream and the data stream are conceptually separated; this means that modifying the memory where code is held might not have any effect on the instructions executed by the processor (because the CPU has a separate instruction and data cache ), at least until a special synchronization instruction is issued; CISC processors that have separate instruction and data caches generally keep them synchronized automatically, for backwards compatibility with older processors. Many early RISC designs also shared

423-708: A "CAD graphics workstation based on the 16032 chip" in October 1983, and presumably following on from work done by Acorn related to the design of the ULA components in its products, the Acorn Cambridge Workstation formed the hardware basis of a chip design product by Qudos called Quickchip, "a comprehensive CAD package for semi-custom gate arrays... supported by a high speed direct write electron beam fabrication facility", used by custom semiconductor product designers such as Flare Technology and promoted by

564-695: A "Universal Gluon" expansion did eventually come to pass through the availability of a number of third-party expansions for the BBC Micro such as the Cambridge Microprocessor Systems 68000 second processor, Flight Electronics 68000 processor board, and the Micro Developments MD512k Universal Second Processor System. Meanwhile, various companies pursued the development of Tube-based second processor solutions involving

705-750: A 24-bit high-speed processor to use as the basis for a digital telephone switch . To reach their goal of switching 1 million calls per hour (300 per second) they calculated that the CPU required performance on the order of 12 million instructions per second (MIPS), compared to their fastest mainframe machine of the time, the 370/168 , which performed at 3.5 MIPS. The design was based on a study of IBM's extensive collection of statistics gathered from their customers. This demonstrated that code in high-performance settings made extensive use of processor registers , and that they often ran out of them. This suggested that additional registers would improve performance. Additionally, they noticed that compilers generally ignored

846-459: A 5-bit number, for 15 bits. If one of these registers is replaced by an immediate, there is still lots of room to encode the two remaining registers and the opcode. Common instructions found in multi-word systems, like INC and DEC , which reduce the number of words that have to be read before performing the instruction, are unnecessary in RISC as they can be accomplished with a single register and

987-537: A Master 128 or Master Econet Terminal (ET), these models being the foundation of the range. It was therefore possible to acquire and upgrade the Master 128 or ET to one of the other models by installing the appropriate coprocessor card, and unlike the ABC whose models could be purchased as complete systems, only the Master 128 and ET were offered by Acorn as systems with the coprocessors offered separately as "modules" to realise

1128-524: A barebones core sufficient for a small embedded processor to supercomputer and cloud computing use with standard and chip designer–defined extensions and coprocessors. It has been tested in silicon design with the ROCKET SoC , which is also available as an open-source processor generator in the CHISEL language. In the early 1980s, significant uncertainties surrounded the RISC concept. One concern involved

1269-400: A better balancing of pipeline stages than before, making RISC pipelines significantly more efficient and allowing higher clock frequencies . Yet another impetus of both RISC and other designs came from practical measurements on real-world programs. Andrew Tanenbaum summed up many of these, demonstrating that processors often had oversized immediates. For instance, he showed that 98% of all

1410-529: A business upgrade for the BBC Micro, with Z80-based computers running the CP/M operating system being the established business platform at that time and thus the likely form of any such upgrade. This upgrade was eventually delivered in 1984 as the Z80 Second Processor, requiring a BBC Micro, dual floppy drives and a display to complete a basic business system for a total cost of around £1500. As such,

1551-858: A customer reaches foundry tapeout or prototyping. 75% of ARM's most recent IP over the last two years are included in ARM Flexible Access. As of October 2019: Arm provides a list of vendors who implement ARM cores in their design (application specific standard products (ASSP), microprocessor and microcontrollers). ARM cores are used in a number of products, particularly PDAs and smartphones . Some computing examples are Microsoft 's first generation Surface , Surface 2 and Pocket PC devices (following 2002 ), Apple 's iPads , and Asus 's Eee Pad Transformer tablet computers , and several Chromebook laptops. Others include Apple's iPhone smartphones and iPod portable media players , Canon PowerShot digital cameras , Nintendo Switch hybrid,

SECTION 10

#1732782913696

1692-817: A design service foundry offers lower overall pricing (through subsidisation of the licence fee). For high volume mass-produced parts, the long term cost reduction achievable through lower wafer pricing reduces the impact of ARM's NRE ( non-recurring engineering ) costs, making the dedicated foundry a better choice. Companies that have developed chips with cores designed by Arm include Amazon.com 's Annapurna Labs subsidiary, Analog Devices , Apple , AppliedMicro (now: MACOM Technology Solutions ), Atmel , Broadcom , Cavium , Cypress Semiconductor , Freescale Semiconductor (now NXP Semiconductors ), Huawei , Intel , Maxim Integrated , Nvidia , NXP , Qualcomm , Renesas , Samsung Electronics , ST Microelectronics , Texas Instruments , and Xilinx . In February 2016, ARM announced

1833-452: A different opcode. In contrast, a 32-bit machine has ample room to encode an immediate value, and doing so avoids the need to do a second memory read to pick up the value. This is why many RISC processors allow a 12- or 13-bit constant to be encoded directly into the instruction word. Assuming a 13-bit constant area, as is the case in the MIPS and RISC designs, another 19 bits are available for

1974-552: A merchant foundry that holds an ARM licence, such as Samsung or Fujitsu, can offer fab customers reduced licensing costs. In exchange for acquiring the ARM core through the foundry's in-house design services, the customer can reduce or eliminate payment of ARM's upfront licence fee. Compared to dedicated semiconductor foundries (such as TSMC and UMC ) without in-house design services, Fujitsu/Samsung charge two- to three-times more per manufactured wafer . For low to mid volume applications,

2115-493: A number of additional points. Among these was the fact that programs spent a significant amount of time performing subroutine calls and returns, and it seemed there was the potential to improve overall performance by speeding these calls. This led the Berkeley design to select a method known as register windows which can significantly improve subroutine performance although at the cost of some complexity. They also noticed that

2256-598: A paper on ways to improve microcoding, but later changed his mind and decided microcode itself was the problem. With funding from the DARPA VLSI Program , Patterson started the Berkeley RISC effort. The Program, practically unknown today, led to a huge number of advances in chip design, fabrication, and even computer graphics. Considering a variety of programs from their BSD Unix variant, the Berkeley team found, as had IBM, that most programs made no use of

2397-484: A particular strategy for implementing some RISC designs, and modern RISC designs generally do away with it (such as PowerPC and more recent versions of SPARC and MIPS). Some aspects attributed to the first RISC- labeled designs around 1975 include the observations that the memory-restricted compilers of the time were often unable to take advantage of features intended to facilitate manual assembly coding, and that complex addressing modes take many cycles to perform due to

2538-413: A pipelined processor and for code generation by an optimizing compiler. A common misunderstanding of the phrase "reduced instruction set computer" is that instructions are simply eliminated, resulting in a smaller set of instructions. In fact, over the years, RISC instruction sets have grown in size, and today many of them have a larger set of instructions than many CISC CPUs. Some RISC processors such as

2679-619: A port of 4.3BSD Unix to the ARM architecture. Despite the ABC 300 series embracing compatibility with the IBM PC world, Acorn would subsequently mostly avoid selling dedicated PC compatibles, with the Acorn M19 - a rebadged Olivetti M19 - appearing in the product range for a short period in the mid-1980s. Beyond the Master 512, the Archimedes range was initially intended to support a similar second processor expansion, but PC support on

2820-452: A quirk of the 6502's design, the CPU left the memory untouched for half of the time. Thus by running the CPU at 1 MHz, the video system could read data during those down times, taking up the total 2 MHz bandwidth of the RAM. In the BBC Micro, the use of 4 MHz RAM allowed the same technique to be used, but running at twice the speed. This allowed it to outperform any similar machine on

2961-455: A ready-to-manufacture verified semiconductor intellectual property core . For these customers, Arm Holdings delivers a gate netlist description of the chosen ARM core, along with an abstracted simulation model and test programs to aid design integration and verification. More ambitious customers, including integrated device manufacturers (IDM) and foundry operators, choose to acquire the processor IP in synthesizable RTL ( Verilog ) form. With

SECTION 20

#1732782913696

3102-469: A reasonably sized constant in a 32-bit instruction word. Since many real-world programs spend most of their time executing simple operations, some researchers decided to focus on making those operations as fast as possible. The clock rate of a CPU is limited by the time it takes to execute the slowest sub-operation of any instruction; decreasing that cycle-time often accelerates the execution of other instructions. The focus on "reduced instructions" led to

3243-506: A sequence of simpler internal instructions. In the 68k, a full 1 ⁄ 3 of the transistors were used for this microcoding. In 1979, David Patterson was sent on a sabbatical from the University of California, Berkeley to help DEC's west-coast team improve the VAX microcode. Patterson was struck by the complexity of the coding process and concluded it was untenable. He first wrote

3384-503: A sequence of simpler operations doing the same thing. This was in part an effect of the fact that many designs were rushed, with little time to optimize or tune every instruction; only those used most often were optimized, and a sequence of those instructions could be faster than a less-tuned instruction performing an equivalent operation as that sequence. One infamous example was the VAX 's INDEX instruction. The Berkeley work also turned up

3525-655: A similar strategy to that of the Acorn Business Computer, Torch were said to be "actively evaluating the B+ motherboard", having used the previous BBC Micro motherboard as the basis of the company's earlier products. Torch's own Graduate product had been noted as potentially filling a gap within the ABC range, this being the "big jump" from the Z80-based ABC 100 systems to the 80286-based ABC 300 models. The 1982 vision of microcomputers acting as terminals to

3666-683: A simple chip design could nevertheless have extremely high performance, much higher than the latest 32-bit designs on the market. The second was a visit by Steve Furber and Sophie Wilson to the Western Design Center , a company run by Bill Mensch and his sister, which had become the logical successor to the MOS team and was offering new versions like the WDC 65C02 . The Acorn team saw high school students producing chip layouts on Apple II machines, which suggested that anyone could do it. In contrast,

3807-457: A single complex instruction such as STRING MOVE , but hide those details from the compiler. The internal operations of a RISC processor are "exposed to the compiler", leading to the backronym 'Relegate Interesting Stuff to the Compiler'. Most RISC architectures have fixed-length instructions and a simple encoding, which simplifies fetch, decode, and issue logic considerably. This is among

3948-482: A single data memory cycle—compared to the "complex instructions" of CISC CPUs that may require dozens of data memory cycles in order to execute a single instruction. The term load–store architecture is sometimes preferred. Another way of looking at the RISC/CISC debate is to consider what is exposed to the compiler. In a CISC processor, the hardware may internally use registers and flag bit in order to implement

4089-434: A special case; not only are they allowed to sell finished silicon containing ARM cores, they generally hold the right to re-manufacture ARM cores for other customers. Arm Holdings prices its IP based on perceived value. Lower performing ARM cores typically have lower licence costs than higher performing cores. In implementation terms, a synthesisable core costs more than a hard macro (blackbox) core. Complicating price matters,

4230-440: A super-minicomputer", providing the result of an in-house benchmark test against a VAX 11/750 running 4.2BSD, both in single-user mode and in "typical heavily loaded" multi-user mode, to illustrate and reinforce the message that such a computer could "take the strain off an overloaded super-minicomputer". Queen Mary College was a significant purchaser of the Acorn Cambridge Workstation, having reportedly acquired "no less than 80 of

4371-825: A variety of licensing terms, varying in cost and deliverables. Arm Holdings provides to all licensees an integratable hardware description of the ARM core as well as complete software development toolset ( compiler , debugger , software development kit ), and the right to sell manufactured silicon containing the ARM CPU. SoC packages integrating ARM's core designs include Nvidia Tegra's first three generations, CSR plc's Quatro family, ST-Ericsson's Nova and NovaThor, Silicon Labs's Precision32 MCU, Texas Instruments's OMAP products, Samsung's Hummingbird and Exynos products, Apple's A4 , A5 , and A5X , and NXP 's i.MX . Fabless licensees, who wish to integrate an ARM core into their own chip design, are usually only interested in acquiring

ARM architecture family - Misplaced Pages Continue

4512-613: A very small set of instructions—but these designs are very different from classic RISC designs, so they have been given other names such as minimal instruction set computer (MISC) or transport triggered architecture (TTA). RISC architectures have traditionally had few successes in the desktop PC and commodity server markets, where the x86 -based platforms remain the dominant processor architecture. However, this may change, as ARM-based processors are being developed for higher performance systems. Manufacturers including Cavium , AMD, and Qualcomm have released server processors based on

4653-475: A visit to another design firm working on modern 32-bit CPU revealed a team with over a dozen members who were already on revision H of their design and yet it still contained bugs. This cemented their late 1983 decision to begin their own CPU design, the Acorn RISC Machine. The original Berkeley RISC designs were in some sense teaching systems, not designed specifically for outright performance. To

4794-475: A working memory management unit (MMU) in the National Semiconductor 32016 chipset, for which a socket was provided on the machine's processor board. Thus, the machine was delivered with only the 32016 CPU, 32081 FPU (Floating Point Unit), and the 32201 TCU (Timing and Control Unit) fitted as standard. Such problems with the 32082 MMU had been noted with regard to hardware workarounds adopted in

4935-432: Is a computer architecture designed to simplify the individual instructions given to the computer to accomplish tasks. Compared to the instructions given to a complex instruction set computer (CISC), a RISC computer might require more instructions (more code) in order to accomplish a task because the individual instructions are written in simpler code. The goal is to offset the need to process more instructions by increasing

5076-550: The Adapteva Epiphany , have an optional short, feature-reduced compressed instruction set . Generally, these instructions expose a smaller number of registers and fewer bits for immediate values, and often use a two-operand format to eliminate one register number from instructions. A two-operand format in a system with 16 registers requires 8 bits for register numbers, leaving another 8 for an opcode or other uses. The SH5 also follows this pattern, albeit having evolved in

5217-623: The DEC Alpha , AMD Am29000 , Intel i860 and i960 , Motorola 88000 , IBM POWER , and, slightly later, the IBM/Apple/Motorola PowerPC . Many of these have since disappeared due to them often offering no competitive advantage over others of the same era. Those that remain are often used only in niche markets or as parts of other systems; of the designs from these traditional vendors, only SPARC and POWER have any significant remaining market. The ARM architecture has been

5358-555: The Fugaku . A number of systems, going back to the 1960s, have been credited as the first RISC architecture, partly based on their use of the load–store approach. The term RISC was coined by David Patterson of the Berkeley RISC project, although somewhat similar concepts had appeared before. The CDC 6600 designed by Seymour Cray in 1964 used a load–store architecture with only two addressing modes (register+register, and register+immediate constant) and 74 operation codes, with

5499-529: The RT PC —was less competitive than others, but the success of SPARC renewed interest within IBM, which released new RISC systems by 1990 and by 1995 RISC processors were the foundation of a $ 15 billion server industry. By the later 1980s, the new RISC designs were easily outperforming all traditional designs by a wide margin. At that point, all of the other vendors began RISC efforts of their own. Among these were

5640-472: The Sun SPARC and MIPS R2000 RISC-based workstations . Further, as the CPU was designed for high-speed I/O, it dispensed with many of the support chips seen in these machines; notably, it lacked any dedicated direct memory access (DMA) controller which was often found on workstations. The graphics system was also simplified based on the same set of underlying assumptions about memory and timing. The result

5781-688: The Wii security processor and 3DS handheld game consoles , and TomTom turn-by-turn navigation systems . In 2005, Arm took part in the development of Manchester University 's computer SpiNNaker , which used ARM cores to simulate the human brain . ARM chips are also used in Raspberry Pi , BeagleBoard , BeagleBone , PandaBoard , and other single-board computers , because they are very small, inexpensive, and consume very little power. The 32-bit ARM architecture ( ARM32 ), such as ARMv7-A (implementing AArch32; see section on Armv8-A for more on it),

ARM architecture family - Misplaced Pages Continue

5922-405: The "S-cycles", that could be used to fill or save multiple registers in a single page using page mode. This doubled memory performance when they could be used, and was especially important for graphics performance. The Berkeley RISC designs used register windows to reduce the number of register saves and restores performed in procedure calls ; the ARM design did not adopt this. Wilson developed

6063-446: The "silicon partner", as they were a source of ROMs and custom chips for Acorn. Acorn provided the design and VLSI provided the layout and production. The first samples of ARM silicon worked properly when first received and tested on 26 April 1985. Known as ARM1, these versions ran at 6 MHz. The first ARM application was as a second processor for the BBC Micro, where it helped in developing simulation software to finish development of

6204-561: The 2 MIPS of the PS/2 70, with its Intel 386 DX @ 16 MHz. A successor, ARM3, was produced with a 4 KB cache, which further improved performance. The address bus was extended to 32 bits in the ARM6, but program code still had to lie within the first 64 MB of memory in 26-bit compatibility mode, due to the reserved bits for the status flags. In the late 1980s, Apple Computer and VLSI Technology started working with Acorn on newer versions of

6345-415: The 300 machines Acorn has sold" by mid-1986. While certain users benefited from a single-user workstation in the way emphasised by Acorn's advertising, specifically that an individual could dedicate their machine to a task and see it completed sooner than the same task queued for execution on a much faster mainframe or supercomputer, Acorn's product saw numerous problems when introduced to a broader audience at

6486-465: The 32-bit ARM architecture was the most widely used architecture in mobile devices and the most popular 32-bit one in embedded systems. In 2013, 10 billion were produced and "ARM-based chips are found in nearly 60 percent of the world's mobile devices". Arm Holdings's primary business is selling IP cores , which licensees use to create microcontrollers (MCUs), CPUs , and systems-on-chips based on those cores. The original design manufacturer combines

6627-399: The 32016-based second processor solution provided by the Acorn Cambridge Workstation, and the Master 512 offers a 80186-based second processor with DOS Plus and GEM support, thus resembling the ABC 300 series in particular ways. However, none of the Master series features an integrated display, which had been criticised in some reviews of the ABC series. Around two years after the unveiling of

6768-704: The 68000, neglected by Acorn in its own offerings , such as the CA Special Products Casper board and the HDP68K board featured in the Torch Computers Unicorn, the latter offering the Unix support never delivered for Acorn's 32016-based systems. The Torch Unicorn was perhaps the clearest realisation of the broader "Universal Gluon" concept, effectively coupling a BBC Micro with a more powerful computing system. Initially mentioned as

6909-530: The ABC range as a "repackaging job" of the BBC Model B, the selection of models was itself regarded as "superb" in some of the commentary following the unveiling of the ABC in late 1984. The ABC Personal Assistant was perceived by some to be the BBC Model C expected from Acorn, raising questions about the work that had been done to the BBC Model B hardware and whether such a board, designed for a reduction in chip count and production cost, would eventually see use in

7050-482: The ABC range, the Master Compact eventually introduced the practice of bundling a display and storage into Acorn's traditional product range. Whereas the different models in the ABC range were combinations of a "host" computer based on the BBC Micro and a second processor fitted inside the display unit, the equivalent Master-series variants were generally accommodated by plug-in coprocessor cards fitted inside

7191-658: The ARM architecture. ARM further partnered with Cray in 2017 to produce an ARM-based supercomputer. On the desktop, Microsoft announced that it planned to support the PC version of Windows 10 on Qualcomm Snapdragon -based devices in 2017 as part of its partnership with Qualcomm. These devices will support Windows applications compiled for 32-bit x86 via an x86 processor emulator that translates 32-bit x86 code to ARM64 code . Apple announced they will transition their Mac desktop and laptop computers from Intel processors to internally developed ARM64-based SoCs called Apple silicon ;

SECTION 50

#1732782913696

7332-457: The ARM core remained essentially the same throughout these changes; ARM2 had 30,000 transistors, while ARM6 grew only to 35,000. In 2005, about 98% of all mobile phones sold used at least one ARM processor. In 2010, producers of chips based on ARM architectures reported shipments of 6.1 billion ARM-based processors , representing 95% of smartphones , 35% of digital televisions and set-top boxes , and 10% of mobile computers . In 2011,

7473-763: The ARM core with other parts to produce a complete device, typically one that can be built in existing semiconductor fabrication plants (fabs) at low cost and still deliver substantial performance. The most successful implementation has been the ARM7TDMI with hundreds of millions sold. Atmel has been a precursor design center in the ARM7TDMI-based embedded system. The ARM architectures used in smartphones, PDAs and other mobile devices range from ARMv5 to ARMv8-A . In 2009, some manufacturers introduced netbooks based on ARM architecture CPUs, in direct competition with netbooks based on Intel Atom . Arm Holdings offers

7614-565: The ARM core. In 1990, Acorn spun off the design team into a new company named Advanced RISC Machines Ltd., which became ARM Ltd. when its parent company, Arm Holdings plc, floated on the London Stock Exchange and Nasdaq in 1998. The new Apple–ARM work would eventually evolve into the ARM6, first released in early 1992. Apple used the ARM6-based ARM610 as the basis for their Apple Newton PDA. In 1994, Acorn used

7755-584: The ARM instruction sets. These cores must comply fully with the ARM architecture. Companies that have designed cores that implement an ARM architecture include Apple, AppliedMicro (now: Ampere Computing ), Broadcom, Cavium (now: Marvell), Digital Equipment Corporation , Intel, Nvidia, Qualcomm, Samsung Electronics, Fujitsu , and NUVIA Inc. (acquired by Qualcomm in 2021). On 16 July 2019, ARM announced ARM Flexible Access. ARM Flexible Access provides unlimited access to included ARM intellectual property (IP) for development. Per product licence fees are required once

7896-564: The ARM2 design running at 8 MHz, and the early 1987 speed-bumped version at 10 to 12 MHz. A significant change in the underlying architecture was the addition of a Booth multiplier , whereas formerly multiplication had to be carried out in software. Further, a new Fast Interrupt reQuest mode, FIQ for short, allowed registers 8 through 14 to be replaced as part of the interrupt itself. This meant FIQ requests did not have to save out their registers, further speeding interrupts. The first use of

8037-622: The ARM2 was the Acorn Archimedes personal computer models A305, A310, and A440 launched in 1987. According to the Dhrystone benchmark, the ARM2 was roughly seven times the performance of a typical 7 MHz 68000-based system like the Amiga or Macintosh SE . It was twice as fast as an Intel 80386 running at 16 MHz, and about the same speed as a multi-processor VAX-11/784 superminicomputer . The only systems that beat it were

8178-736: The ARM610 as the main central processing unit (CPU) in their RiscPC computers. DEC licensed the ARMv4 architecture and produced the StrongARM . At 233  MHz , this CPU drew only one watt (newer versions draw far less). This work was later passed to Intel as part of a lawsuit settlement, and Intel took the opportunity to supplement their i960 line with the StrongARM. Intel later developed its own high performance implementation named XScale , which it has since sold to Marvell . Transistor count of

8319-466: The Acorn Cambridge Workstation range: the ACW 100, ACW 121 and ACW 143 being models with 1 MB of RAM (expandable to 4 MB except for the ACW 100), the ACW 443 having 4 MB of RAM; the ACW 143 and ACW 443 offering hard drive storage. A range of languages were bundled as standard, with Acorn emphasising the productivity benefits of having a 32-bit desktop computer with "the computational performance of

8460-618: The Archimedes range initially focused on software emulation with the PC Emulator product. Eventually, hardware expansions from Aleph One provided the envisaged second processor capabilities, these being sold by Acorn in some configurations for certain models. Acorn would go on to emphasise PC compatibility with the Archimedes' successor, the Risc PC , with its architecture supporting a plug-in Intel-compatible CPU alongside

8601-597: The Berkeley RISC-II system. The US government Committee on Innovations in Computing and Communications credits the acceptance of the viability of the RISC concept to the success of the SPARC system. By 1989 many RISC CPUs were available; competition lowered their price to $ 10 per MIPS in large quantities, much less expensive than the sole sourced Intel 80386 . The performance of IBM's RISC CPU—only available in

SECTION 60

#1732782913696

8742-581: The Built on ARM Cortex Technology licence, often shortened to Built on Cortex (BoC) licence. This licence allows companies to partner with ARM and make modifications to ARM Cortex designs. These design modifications will not be shared with other companies. These semi-custom core designs also have brand freedom, for example Kryo 280 . Companies that are current licensees of Built on ARM Cortex Technology include Qualcomm . Companies can also obtain an ARM architectural licence for designing their own CPU cores using

8883-418: The CPU can be in only one mode, but it can switch modes due to external events (interrupts) or programmatically. The original (and subsequent) ARM implementation was hardwired without microcode , like the much simpler 8-bit 6502 processor used in prior Acorn microcomputers. The 32-bit ARM architecture (and the 64-bit architecture for the most part) includes the following RISC features: To compensate for

9024-400: The CPU designs available. Their conclusion about the existing 16-bit designs was that they were a lot more expensive and were still "a bit crap", offering only slightly higher performance than their BBC Micro design. They also almost always demanded a large number of support chips to operate even at that level, which drove up the cost of the computer as a whole. These systems would simply not hit

9165-448: The ISA, who in partnership with TI, GEC, Sharp, Nokia, Oracle and Digital would develop low-power and embedded RISC designs, and target those market segments, which at the time were niche. With the rise in mobile, automotive, streaming, smart device computing, ARM became the most widely used ISA, the company estimating almost half of all CPUs shipped in history have been ARM. Confusion around

9306-610: The PC and the status flags. This decision halved the interrupt overhead. Another change, and among the most important in terms of practical real-world performance, was the modification of the instruction set to take advantage of page mode DRAM . Recently introduced, page mode allowed subsequent accesses of memory to run twice as fast if they were roughly in the same location, or "page", in the DRAM chip. Berkeley's design did not consider page mode and treated all memory equally. The ARM design added special vector-like memory access instructions,

9447-592: The PowerPC have instruction sets as large as the CISC IBM System/370 , for example; conversely, the DEC PDP-8 —clearly a CISC CPU because many of its instructions involve multiple memory accesses—has only 8 basic instructions and a few extended instructions. The term "reduced" in that phrase was intended to describe the fact that the amount of work any single instruction accomplishes is reduced—at most

9588-571: The RISC's basic register-heavy and load/store concepts, ARM added a number of the well-received design notes of the 6502. Primary among them was the ability to quickly serve interrupts , which allowed the machines to offer reasonable input/output performance with no added external hardware. To offer interrupts with similar performance as the 6502, the ARM design limited its physical address space to 64 MB of total addressable space, requiring 26 bits of address. As instructions were 4 bytes (32 bits) long, and required to be aligned on 4-byte boundaries,

9729-557: The UK's Department of Trade and Industry. A related product was apparently produced by Qudos for the BBC Master Turbo or BBC Micro with 6502 second processor expansion, offering design support for custom gate arrays of "up to around 300 gates in size" based on Ferranti ULA technology. Quickchip was subsequently ported to the Acorn Archimedes , with the software having previously been "running on powerful Unix workstations". Although

9870-535: The VAX. They followed this up with the 40,760-transistor, 39-instruction RISC-II in 1983, which ran over three times as fast as RISC-I. As the RISC project began to become known in Silicon Valley , a similar project began at Stanford University in 1981. This MIPS project grew out of a graduate course by John L. Hennessy , produced a functioning system in 1983, and could run simple programs by 1984. The MIPS approach emphasized an aggressive clock cycle and

10011-675: The addition of simultaneous multithreading (SMT) for improved performance or fault tolerance . Acorn Computers ' first widely successful design was the BBC Micro , introduced in December 1981. This was a relatively conventional machine based on the MOS Technology 6502 CPU but ran at roughly double the performance of competing designs like the Apple II due to its use of faster dynamic random-access memory (DRAM). Typical DRAM of

10152-660: The architecture, ARMv7, defines three architecture "profiles": Although the architecture profiles were first defined for ARMv7, ARM subsequently defined the ARMv6-M architecture (used by the Cortex M0 / M0+ / M1 ) as a subset of the ARMv7-M profile with fewer instructions. Except in the M-profile, the 32-bit ARM architecture specifies several CPU modes, depending on the implemented architecture features. At any moment in time,

10293-609: The basic clock cycle being 10 times faster than the memory access time. Partly due to the optimized load–store architecture of the CDC 6600, Jack Dongarra says that it can be considered a forerunner of modern RISC systems, although a number of other technical barriers needed to be overcome for the development of a modern RISC system. Michael J. Flynn views the first RISC system as the IBM 801 design, begun in 1975 by John Cocke and completed in 1980. The 801 developed out of an effort to build

10434-488: The basis for more powerful machines. Meanwhile, the machine that would become known as the ABC 100 was described in mid-1983 as the Acorn Business Machine, being based on the BBC Micro with Z80 Second Processor, twin disk drives, running CP/M, with an anticipated launch the same year and a price of "under £2000". Such a configuration, with a Z80 processor running CP/M assisted by a 6502 processor managing

10575-418: The bundle was not offered as a single, packaged business computer product, unlike a widening range of competing products that could be obtained at such a price. Various systems had already been proposed by Acorn early in the life of the BBC Micro before the Acorn Business Computer name had been publicly adopted. For instance, the machine that would eventually be known as the ABC 210 was described in mid-1982 in

10716-472: The characteristic of having a branch delay slot , an instruction space immediately following a jump or branch. The instruction in this space is executed, whether or not the branch is taken (in other words the effect of the branch is delayed). This instruction keeps the ALU of the CPU busy for the extra time normally needed to perform a branch. Nowadays the branch delay slot is considered an unfortunate side effect of

10857-421: The code for the register-register instructions (for performing arithmetic and tests) are separate from the instructions that access the main memory of the computer. The design of the CPU allows RISC computers few simple addressing modes and predictable instruction times that simplify design of the system as a whole. The conceptual developments of the RISC computer architecture began with the IBM 801 project in

10998-753: The concepts were revisited in the BBC Master series of microcomputers. Like the ABC Personal Assistant, the Master 128 offers more memory than the original BBC Micro and includes the View and ViewSheet productivity software on board. The Master Econet Terminal, like the ABC Terminal, emphasises network access and a lack of on-board software and local storage. Meanwhile, the Master Scientific was intended to offer some continuity with

11139-441: The constants in a program would fit in 13 bits , yet many CPU designs dedicated 16 or 32 bits to store them. This suggests that, to reduce the number of memory accesses, a fixed length machine could store constants in unused bits of the instruction word itself, so that they would be immediately ready when the CPU needs them (much like immediate addressing in a conventional design). This required small opcodes in order to leave room for

11280-478: The context of an apparent deal with National Semiconductor , indicating a 1 MB system with hard disks and "Acorn, Unix or Idris operating systems" at an estimated price of around $ 3500, with a second processor product for the BBC Micro having only 256 KB RAM. The Gluon concept, offering a 32016 second processor solution for the BBC Micro and other microcomputers, featured prominently in the company's strategy to offer more powerful computing hardware and to provide

11421-489: The conventional BBC Micro range, bringing lower pricing and higher reliability. This model, providing a hard disk, entered production as the Acorn Cambridge Workstation (ACW 443). The reason given for providing Panos as the operating system at the launch of the Acorn Cambridge Workstation instead of Xenix, despite Acorn having contracted Logica to port Xenix to the machine, was the apparent lack of

11562-423: The definition of RISC deriving from the formulation of the term, along with the tendency to opportunistically categorize processor architectures with relatively few instructions (or groups of instructions) as RISC architectures, led to attempts to define RISC as a design philosophy. One attempt to do so was expressed as the following: A RISC processor has an instruction set that is designed for efficient execution by

11703-427: The design goal. They also considered the new 32-bit designs, but these cost even more and had the same issues with support chips. According to Sophie Wilson , all the processors tested at that time performed about the same, with about a 4 Mbit/s bandwidth. Two key events led Acorn down the path to ARM. One was the publication of a series of reports from the University of California, Berkeley , which suggested that

11844-531: The design of the Whitechapel MG-1 workstation (a somewhat higher-specification product than Acorn's offerings that initially provided National Semiconductor's own Unix variant, Genix, instead of Xenix). Logica had announced general availability of Xenix 3.0 for the 32000 series, featuring "full demand paging virtual memory", for May 1984, and 32032-based systems running Xenix reportedly became available. Four models were originally planned for launch in

11985-558: The desired variants. A more direct legacy of the range concerns the BBC Model B+ whose motherboard has its origin as the BBC Micro "host" found in the different ABC models: a design using 64-kilobit RAM chips, an updated disk controller, and support for shadow RAM . Given perceptions of one ABC model as the BBC Model C, the Model B+ could be regarded as delivering the basis of that widely expected model. Having successfully pursued

12126-828: The development of these products, however. In late 1983, the launch of the Z80 Second Processor had been estimated as occurring in February 1984, and although the 16032 Second Processor had been demonstrated at an event in Munich, Acorn had not apparently decided on pricing or positioning, describing the product as being "months away". Meanwhile, negotiations between National Semiconductor, Acorn, Logica and Microsoft were ongoing with regard to making Unix - Xenix , specifically - available on "the BBC machine". The following models were originally announced in late 1984, with pricing for several models announced in early 1985. Although acknowledging

12267-620: The display and peripherals was already proven by various Torch Computers products - notably the BBC Micro-based C-series (Communicator) - and also featured in machines like the C/WP Cortex. The successful development of second processor solutions was regarded as an essential progression that would enable Acorn to offer variants of the BBC Micro as business machines and to be able to compete with Torch, whose products were in some ways pursuing such goals. Delays affected

12408-537: The earlier 8-bit designs simply could not compete. Even newer 32-bit designs were also coming to market, such as the Motorola 68000 and National Semiconductor NS32016 . Acorn began considering how to compete in this market and produced a new paper design named the Acorn Business Computer . They set themselves the goal of producing a machine with ten times the performance of the BBC Micro, but at

12549-472: The early 1980s, leading, for example, to the iron law of processor performance . Since 2010, a new open standard instruction set architecture (ISA), Berkeley RISC-V , has been under development at the University of California, Berkeley, for research purposes and as a free alternative to proprietary ISAs. As of 2014, version 2 of the user space ISA is fixed. The ISA is designed to be extensible from

12690-643: The early 1980s. Few of these designs began by using RISC microprocessors . The varieties of RISC processor design include the ARC processor, the DEC Alpha, the AMD Am29000 , the ARM architecture, the Atmel AVR , Blackfin , Intel i860 , Intel i960 , LoongArch , Motorola 88000 , the MIPS architecture, PA-RISC, Power ISA, RISC-V , SuperH , and SPARC. RISC processors are used in supercomputers , such as

12831-449: The era ran at about 2 MHz; Acorn arranged a deal with Hitachi for a supply of faster 4 MHz parts. Machines of the era generally shared memory between the processor and the framebuffer , which allowed the processor to quickly update the contents of the screen without having to perform separate input/output (I/O). As the timing of the video display is exacting, the video hardware had to have priority access to that memory. Due to

12972-591: The first such computers, using the Apple M1 processor, were released in November 2020. Macs with Apple silicon can run x86-64 binaries with Rosetta 2 , an x86-64 to ARM64 translator. Outside of the desktop arena, however, the ARM RISC architecture is in widespread use in smartphones, tablets and many forms of embedded devices. While early RISC designs differed significantly from contemporary CISC designs, by 2000

13113-447: The hardware and systems software that impacted the project for 15 months. Acorn's earlier positioning of this system as a CAD workstation failed to keep up with user expectations, with the BBC Micro architecture offering an insufficiently high screen resolution and with the system not being provided with mouse or trackball, these contributing to perceptions of it being "less than ideal for Computer Aided Design". Some confusion arose when

13254-509: The highest-performing CPUs in the RISC line were almost indistinguishable from the highest-performing CPUs in the CISC line. RISC architectures are now used across a range of platforms, from smartphones and tablet computers to some of the world's fastest supercomputers such as Fugaku , the fastest on the TOP500 list as of November 2020 , and Summit , Sierra , and Sunway TaihuLight ,

13395-413: The immediate value 1. The original RISC-I format remains a canonical example of the concept. It uses 7 bits for the opcode and a 1-bit flag for conditional codes, the following 5 bits for the destination register, and the next five for the first operand. This leaves 14 bits, the first of which indicates whether the following 13 contain an immediate value or uses only five of them to indicate a register for

13536-413: The institution. Despite a fairly varied range of programming language products being available for the machine's Panos environment - 32016 assembly language, BASIC, BCPL, Fortran, Lisp, Pascal - mostly giving the impression of being "top-notch" implementations, other kinds of applications were more scarce or suffered from performance issues. System and network reliability proved to be a significant problem in

13677-403: The instruction encoding. This leaves ample room to indicate both the opcode and one or two registers. Register-to-register operations, mostly math and logic, require enough bits to encode the two or three registers being used. Most processors use the three-operand format, of the form A = B + C , in which case three registers numbers are needed. If the processor has 32 registers, each one requires

13818-535: The instruction set, writing a simulation of the processor in BBC ;BASIC that ran on a BBC Micro with a second 6502 processor . This convinced Acorn engineers they were on the right track. Wilson approached Acorn's CEO, Hermann Hauser , and requested more resources. Hauser gave his approval and assembled a small team to design the actual processor based on Wilson's ISA. The official Acorn RISC Machine project started in October 1983. Acorn chose VLSI Technology as

13959-445: The instruction word which could then be used to select among a larger set of registers. The telephone switch program was canceled in 1975, but by then the team had demonstrated that the same design would offer significant performance gains running just about any code. In simulations, they showed that a compiler tuned to use registers wherever possible would run code about three times as fast as traditional designs. Somewhat surprisingly,

14100-471: The lack of microcode , which represents about one-quarter to one-third of the 68000's transistors, and the lack of (like most CPUs of the day) a cache . This simplicity enabled the ARM2 to have a low power consumption and simpler thermal packaging by having fewer powered transistors. Nevertheless, ARM2 offered better performance than the contemporary 1987 IBM PS/2 Model 50 , which initially utilised an Intel 80286 , offering 1.8 MIPS @ 10 MHz, and later in 1987,

14241-428: The large variety of instructions in the 68k. Patterson's early work pointed out an important problem with the traditional "more is better" approach; even those instructions that were critical to overall performance were being delayed by their trip through the microcode. If the microcode was removed, the programs would run faster. And since the microcode ultimately took a complex instruction and broke it into steps, there

14382-610: The late 1970s, but these were not immediately put into use. Designers in California picked up the 801 concepts in two seminal projects, Stanford MIPS and Berkeley RISC . These were commercialized in the 1980s as the MIPS and SPARC systems. IBM eventually produced RISC designs based on further work on the 801 concept, the IBM POWER architecture , PowerPC , and Power ISA . As the projects matured, many similar designs, produced in

14523-482: The late 1970s, the 801 had become well-known in the industry. This coincided with new fabrication techniques that were allowing more complex chips to come to market. The Zilog Z80 of 1976 had 8,000 transistors, whereas the 1979 Motorola 68000 (68k) had 68,000. These newer designs generally used their newfound complexity to expand the instruction set to make it more orthogonal. Most, like the 68k, used microcode to do this, reading instructions and re-implementing them as

14664-421: The lower 2 bits of an instruction address were always zero. This meant the program counter (PC) only needed to be 24 bits, allowing it to be stored along with the eight bit processor flags in a single 32-bit register. That meant that upon receiving an interrupt, the entire machine state could be saved in a single operation, whereas had the PC been a full 32-bit value, it would require separate operations to store

14805-494: The main goals of the RISC approach. Some of this is possible only due to the contemporary move to 32-bit formats. For instance, in a typical program, over 30% of all the numeric constants are either 0 or 1, 95% will fit in one byte, and 99% in a 16-bit value. When computers were based on 8- or 16-bit words, it would be difficult to have an immediate combined with the opcode in a single memory word, although certain instructions like increment and decrement did this implicitly by using

14946-422: The majority of mathematical instructions were simple assignments; only 1 ⁄ 3 of them actually performed an operation like addition or subtraction. But when those operations did occur, they tended to be slow. This led to far more emphasis on the underlying arithmetic data unit, as opposed to previous designs where the majority of the chip was dedicated to control and microcode. The resulting Berkeley RISC

15087-492: The market. 1981 was also the year that the IBM Personal Computer was introduced. Using the recently introduced Intel 8088 , a 16-bit CPU compared to the 6502's 8-bit design, it offered higher overall performance. Its introduction changed the desktop computer market radically: what had been largely a hobby and gaming market emerging over the prior five years began to change to a must-have business tool where

15228-558: The mid-1980s. The Acorn ARM1 appeared in April 1985, MIPS R2000 appeared in January 1986, followed shortly thereafter by Hewlett-Packard 's PA-RISC in some of their computers. In the meantime, the Berkeley effort had become so well known that it eventually became the name for the entire concept. In 1987 Sun Microsystems began shipping systems with the SPARC processor, directly based on

15369-514: The mid-to-late 1980s and early 1990s, such as ARM , PA-RISC , and Alpha , created central processing units that increased the commercial utility of the Unix workstation and of embedded processors in the laser printer , the router , and similar products. In the minicomputer market, companies that included Celerity Computing , Pyramid Technology , and Ridge Computers began offering systems designed according to RISC or RISC-like principles in

15510-562: The models were shipped to customers. The ABC 210 was subsequently relaunched as the Acorn Cambridge Workstation in July 1985, and sold in modest numbers to academic and scientific users. The ABC range was developed by Acorn essentially as a repackaged BBC Micro , expanded to 64 KB RAM, to which was added (in some models) a second processor and extra memory to complement the Micro's 6502 . The electronics and disk drives were integrated into

15651-695: The monitor housing, with a separate keyboard. The Zilog Z80 , Intel 80286 and National Semiconductor 32016 were all used as second processors in the various models. Two of the eight models produced, the Personal Assistant and the Terminal, had no second processor. As part of the agreement made between Acorn and the BBC to supply a microcomputer to accompany the BBC Computer Literacy Project, Acorn had committed to deliver

15792-563: The most significant characteristics of RISC processors was that external memory was only accessible by a load or store instruction. All other instructions were limited to internal registers. This simplified many aspects of processor design: allowing instructions to be fixed-length, simplifying pipelines, and isolating the logic for dealing with the delay in completing a memory access (cache miss, etc.) to only two instructions. This led to RISC designs being referred to as load–store architectures. Some CPUs have been specifically designed to have

15933-591: The most widely adopted RISC ISA, initially intended to deliver higher-performance desktop computing, at low cost, and in a restricted thermal package, such as in the Acorn Archimedes , while featuring in the Super Computer League tables , its initial, relatively, lower power and cooling implementation was soon adapted to embedded applications, such as laser printer raster image processing. Acorn, in partnership with Apple Inc, and VLSI, creating ARM Ltd, in 1990, to share R&D costs and find new markets for

16074-404: The next three on that list. Acorn Business Computer Acorn had stated in a February 1985 press release that the ABC machines would soon be available in 50 stores, but having been rescued by Olivetti, no dealers were stocking the range and only the Personal Assistant and 300 series models were expected to be on display by the end of March. However, the ABC range was cancelled before any of

16215-540: The opcode was 0 and the last 6 bits contained the actual code; those that used an immediate value used the normal opcode field at the front. One drawback of 32-bit instructions is reduced code density, which is more adverse a characteristic in embedded computing than it is in the workstation and server markets RISC architectures were originally designed to serve. To address this problem, several architectures, such as SuperH (1992), ARM thumb (1994), MIPS16e (2004), Power Variable Length Encoding ISA (2006), RISC-V , and

16356-531: The opposite direction, having added longer 32-bit instructions to an original 16-bit encoding. The most characteristic aspect of RISC is executing at least one instruction per cycle . Single-cycle operation is described as "the rapid execution of simple functions that dominate a computer's instruction stream", thus seeking to deliver an average throughput approaching one instruction per cycle for any single instruction stream. Other features of RISC architectures include: RISC designs are also more likely to feature

16497-434: The protected mode of the 80286 and relying on the "host" 6502 at the core of the ABC architecture to handle the display needs of each application, skepticism was expressed at Acorn's likely pricing and the company's ability to deliver the product by a rumoured release date of March 1985. Although most of the ABC models failed to reach the market in their original form, particularly after Olivetti's rescue of Acorn, several of

16638-568: The range was first shown, with commentators given the impression that the graphical environment had been developed by Acorn. It was subsequently noted that Acorn and Digital Research had apparently conspired to leave such an impression because the Digital Research product itself was still "secret at the time Acorn decided to show it". Although impressed by the potential of the machine, offering support for running four applications concurrently, including traditional DOS applications, by using

16779-497: The required additional memory accesses. It was argued that such functions would be better performed by sequences of simpler instructions if this could yield implementations small enough to leave room for many registers, reducing the number of slow memory accesses. In these simple designs, most instructions are of uniform length and similar structure, arithmetic operations are restricted to CPU registers and only separate load and store instructions access memory. These properties enable

16920-402: The resulting machine being called a "reduced instruction set computer" (RISC). The goal was to make instructions so simple that they could easily be pipelined, in order to achieve a single clock throughput at high frequencies . This contrasted with CISC designs whose "crucial arithmetic operations and register transfers" were considered difficult to pipeline. Later, it was noted that one of

17061-508: The same code would run about 50% faster even on existing machines due to the improved register use. In practice, their experimental PL/8 compiler, a slightly cut-down version of PL/I , consistently produced code that ran much faster on their existing mainframes. A 32-bit version of the 801 was eventually produced in a single-chip form as the IBM ROMP in 1981, which stood for 'Research OPD [Office Products Division] Micro Processor'. This CPU

17202-498: The same price. This would outperform and underprice the PC. At the same time, the recent introduction of the Apple Lisa brought the graphical user interface (GUI) concept to a wider audience and suggested the future belonged to machines with a GUI. The Lisa, however, cost $ 9,995, as it was packed with support chips, large amounts of memory, and a hard disk drive , all very expensive then. The engineers then began studying all of

17343-475: The second half of the 1980s, and led the designers of the MIPS-X to put it this way in 1987: The goal of any instruction format should be: 1. simple decode, 2. simple decode, and 3. simple decode. Any attempts at improved code density at the expense of CPU performance should be ridiculed at every opportunity. Competition between RISC and conventional CISC approaches was also the subject of theoretical analysis in

17484-408: The second operand. A more complex example is the MIPS encoding, which used only 6 bits for the opcode, followed by two 5-bit registers. The remaining 16 bits could be used in two ways, one as a 16-bit immediate value, or as a 5-bit shift value (used only in shift operations, otherwise zero) and the remaining 6 bits as an extension on the opcode. In the case of register-to-register arithmetic operations,

17625-458: The simpler design, compared with processors like the Intel 80286 and Motorola 68020 , some additional design features were used: ARM includes integer arithmetic operations for add, subtract, and multiply; some versions of the architecture also support divide operations. Reduced instruction set computer In electronics and computer science , a reduced instruction set computer ( RISC )

17766-596: The smaller-scale Minichip solution ran on a BBC Micro-based system with 6502 coprocessor, and was also released for the Archimedes, the Unix-based Quickchip solution apparently ran on Vax systems running Ultrix. Having promised some kind of Unix product as early as 1982, Acorn eventually released a Unix workstation in 1989 based on the Archimedes hardware platform, followed up by other models in 1990. Instead of Xenix, these workstations ran RISC iX :

17907-424: The speed of each instruction, in particular by implementing an instruction pipeline , which may be simpler to achieve given simpler instructions. The key operational concept of the RISC computer is that each instruction performs only one function (e.g. copy a value from memory to a register). The RISC computer usually has many (16 or 32) high-speed, general-purpose registers with a load–store architecture in which

18048-514: The support chips (VIDC, IOC, MEMC), and sped up the CAD software used in ARM2 development. Wilson subsequently rewrote BBC BASIC in ARM assembly language . The in-depth knowledge gained from designing the instruction set enabled the code to be very dense, making ARM BBC BASIC an extremely good test for any ARM emulator. The result of the simulations on the ARM1 boards led to the late 1986 introduction of

18189-536: The synthesizable RTL, the customer has the ability to perform architectural level optimisations and extensions. This allows the designer to achieve exotic design goals not otherwise possible with an unmodified netlist ( high clock speed , very low power consumption, instruction set extensions, etc.). While Arm Holdings does not grant the licensee the right to resell the ARM architecture itself, licensees may freely sell manufactured products such as chip devices, evaluation boards and complete systems. Merchant foundries can be

18330-478: The teaching environment, although the introduction of Panos 1.3 improved the situation "markedly". One academic project struggled with "the initial unreliability and unsuitability of the Acorn workstation as a development machine", reporting slow program build times and the lack of debugging tools that led to other systems being used to develop software for the machine, also experiencing "apparently random faults" with

18471-459: The use of memory; a single instruction from a traditional processor like the Motorola 68k may be written out as perhaps a half dozen of the simpler RISC instructions. In theory, this could slow the system down as it spent more time fetching instructions from memory. But by the mid-1980s, the concepts had matured enough to be seen as commercially viable. Commercial RISC designs began to emerge in

18612-514: The use of the pipeline, making sure it could be run as "full" as possible. The MIPS system was followed by the MIPS-X and in 1984 Hennessy and his colleagues formed MIPS Computer Systems to produce the design commercially. The venture resulted in a new architecture that was also called MIPS and the R2000 microprocessor in 1985. The overall philosophy of the RISC concept was widely understood by

18753-441: The vast majority of the available instructions, especially orthogonal addressing modes. Instead, they selected the fastest version of any given instruction and then constructed small routines using it. This suggested that the majority of instructions could be removed without affecting the resulting code. These two conclusions worked in concert; removing instructions would allow the instruction opcodes to be shorter, freeing up bits in

18894-495: The window "down" by eight, to the set of eight registers used by that procedure, and the return moves the window back. The Berkeley RISC project delivered the RISC-I processor in 1982. Consisting of only 44,420 transistors (compared with averages of about 100,000 in newer CISC designs of the era), RISC-I had only 32 instructions, and yet completely outperformed any other single-chip design, with estimated performance being higher than

19035-440: The world's fastest supercomputer from 2020 to 2022. With over 230 billion ARM chips produced, since at least 2003, and with its dominance increasing every year, ARM is the most widely used family of instruction set architectures. There have been several generations of the ARM design. The original ARM1 used a 32-bit internal structure but had a 26-bit address space that limited it to 64 MB of main memory . This limitation

19176-512: Was a dramatically simplified design, offering performance on par with expensive workstations but at a price point similar to contemporary desktops. The ARM2 featured a 32-bit data bus , 26-bit address space and 27 32-bit registers , of which 16 are accessible at any one time (including the PC ). The ARM2 had a transistor count of just 30,000, compared to Motorola's six-year-older 68000 model with around 68,000. Much of this simplicity came from

19317-498: Was based on gaining performance through the use of pipelining and aggressive use of register windowing. In a traditional CPU, one has a small number of registers, and a program can use any register at any time. In a CPU with register windows, there are a huge number of registers, e.g., 128, but programs can only use a small number of them, e.g., eight, at any one time. A program that limits itself to eight registers per procedure can make very fast procedure calls : The call simply moves

19458-468: Was designed for "mini" tasks, and found use in peripheral interfaces and channel controllers on later IBM computers. It was also used as the CPU in the IBM RT PC in 1986, which turned out to be a commercial failure. Although the 801 did not see widespread use in its original form, it inspired many research projects, including ones at IBM that would eventually lead to the IBM POWER architecture . By

19599-474: Was no reason the compiler couldn't do this instead. These studies suggested that, even with no other changes, one could make a chip with 1 ⁄ 3 fewer transistors that would run faster. In the original RISC-I paper they noted: Skipping this extra level of interpretation appears to enhance performance while reducing chip size. It was also discovered that, on microcoded implementations of certain architectures, complex operations tended to be slower than

19740-678: Was removed in the ARMv3 series, which has a 32-bit address space, and several additional generations up to ARMv7 remained 32-bit. Released in 2011, the ARMv8-A architecture added support for a 64-bit address space and 64-bit arithmetic with its new 32-bit fixed-length instruction set. Arm Holdings has also released a series of additional instruction sets for different rules; the "Thumb" extension adds both 32- and 16-bit instructions for improved code density , while Jazelle added instructions for directly handling Java bytecode . More recent changes include

19881-570: Was the most widely used architecture in mobile devices as of 2011. Since 1995, various versions of the ARM Architecture Reference Manual (see § External links ) have been the primary source of documentation on the ARM processor architecture and instruction set, distinguishing interfaces that all ARM processors are required to support (such as instruction semantics) from implementation details that may vary. The architecture has evolved over time, and version seven of

#695304