Misplaced Pages

#263736

91-413: The idea to use spheres to represent characters in the game was proposed by Keith Kirby, the team decided on implementing the idea as it would save processor power, as well as the fact that characters would look the same regardless of the angle the camera is situated at when they are constructed from spheres, which are also relatively quite easy to represent in the game's code. The Genesis/Mega Drive version

182-446: A digital modem  – one that connects directly to a digital telephone network interface, such as T1 or PRI – could send a signal that utilized every bit of bandwidth available in the system. While that signal still had to be converted back to analog at the subscriber end, that conversion would not distort the signal in the same way that the opposite direction did. The first 56k (56 kbit/s) dial-up option

273-473: A 6.75 out of 10 average. GamePro gave the 3DO version a highly positive review, applauding the additions and improvements such as enhanced graphics, increased play speed, rendered backgrounds, new character, character-specific theme songs, and arena rotation, as well as the humor and "non-conformist attitude" of the game itself. Ballz was ranked seventh in a 2011 list of "Top Ten Fighting Games We'd Like to Forget", compiled by Game Informer . The author of

364-563: A GaAs p-n junction light emitter and an electrically isolated semiconductor photodetector. On August 8, 1962, Biard and Pittman filed a patent titled "Semiconductor Radiant Diode" based on their findings, which described a zinc-diffused p–n junction LED with a spaced cathode contact to allow for efficient emission of infrared light under forward bias . After establishing the priority of their work based on engineering notebooks predating submissions from G.E. Labs, RCA Research Labs, IBM Research Labs, Bell Labs , and Lincoln Lab at MIT ,

455-671: A current source of a battery or a pulse generator and with a comparison to a variant, pure, crystal in 1953. Rubin Braunstein of the Radio Corporation of America reported on infrared emission from gallium arsenide (GaAs) and other semiconductor alloys in 1955. Braunstein observed infrared emission generated by simple diode structures using gallium antimonide (GaSb), GaAs, indium phosphide (InP), and silicon-germanium (SiGe) alloys at room temperature and at 77  kelvins . In 1957, Braunstein further demonstrated that

546-463: A different colored belt, and these change the fighter's coloring scheme. Electronic Gaming Monthly gave the Genesis version a 6.2 out of 10 average, commenting that "The fighters were interesting, with their various taunts and other poses, and the whole idea is innovative, but in the end it just never really came together for me." GamePro gave the Genesis version a positive review. They praised

637-401: A game out of time." Modem A modulator-demodulator , commonly referred to as a modem , is a computer hardware device that converts data from a digital format into a format suitable for an analog transmission medium such as telephone or radio. A modem transmits data by modulating one or more carrier wave signals to encode digital information , while the receiver demodulates

728-408: A given unit of time , usually expressed in bits per second (symbol bit/s , sometimes abbreviated "bps") or rarely in bytes per second (symbol B/s ). Modern broadband modem speeds are typically expressed in megabits per second (Mbit/s). Historically, modems were often classified by their symbol rate , measured in baud . The baud unit denotes symbols per second, or the number of times per second

819-554: A glass window or lens to let the light out. Modern indicator LEDs are packed in transparent molded plastic cases, tubular or rectangular in shape, and often tinted to match the device color. Infrared devices may be dyed, to block visible light. More complex packages have been adapted for efficient heat dissipation in high-power LEDs . Surface-mounted LEDs further reduce the package size. LEDs intended for use with fiber optics cables may be provided with an optical connector. The first blue -violet LED, using magnesium-doped gallium nitride

910-568: A longer lifetime, improved physical robustness, smaller sizes, and faster switching. In exchange for these generally favorable attributes, disadvantages of LEDs include electrical limitations to low voltage and generally to DC (not AC) power, the inability to provide steady illumination from a pulsing DC or an AC electrical supply source, and a lesser maximum operating temperature and storage temperature. LEDs are transducers of electricity into light. They operate in reverse of photodiodes , which convert light into electricity. Electroluminescence as

1001-485: A loudspeaker. Intercepting the beam stopped the music. We had a great deal of fun playing with this setup." In September 1961, while working at Texas Instruments in Dallas , Texas , James R. Biard and Gary Pittman discovered near-infrared (900 nm) light emission from a tunnel diode they had constructed on a GaAs substrate. By October 1961, they had demonstrated efficient light emission and signal coupling between

SECTION 10

#1732787242264

1092-518: A medium with less than ideal characteristics, such as a telephone line that is of poor quality or is too long. This capability is often adaptive so that a modem can discover the maximum practical transmission rate during the connect phase, or during operation. Modems grew out of the need to connect teleprinters over ordinary phone lines instead of the more expensive leased lines which had previously been used for current loop –based teleprinters and automated telegraphs . The earliest devices which satisfy

1183-557: A method for producing high-brightness blue LEDs using a new two-step process in 1991. In 2015, a US court ruled that three Taiwanese companies had infringed Moustakas's prior patent, and ordered them to pay licensing fees of not less than US$ 13 million. Two years later, in 1993, high-brightness blue LEDs were demonstrated by Shuji Nakamura of Nichia Corporation using a gallium nitride (GaN) growth process. These LEDs had efficiencies of 10%. In parallel, Isamu Akasaki and Hiroshi Amano of Nagoya University were working on developing

1274-523: A phenomenon was discovered in 1907 by the English experimenter Henry Joseph Round of Marconi Labs , using a crystal of silicon carbide and a cat's-whisker detector . Russian inventor Oleg Losev reported the creation of the first LED in 1927. His research was distributed in Soviet, German and British scientific journals, but no practical use was made of the discovery for several decades, partly due to

1365-574: A phosphor-silicon mixture on the LED using techniques such as jet dispensing, and allowing the solvents to evaporate, the LEDs are often tested, and placed on tapes for SMT placement equipment for use in LED light bulb production. Some "remote phosphor" LED light bulbs use a single plastic cover with YAG phosphor for one or several blue LEDs, instead of using phosphor coatings on single-chip white LEDs. Ce:YAG phosphors and epoxy in LEDs can degrade with use, and

1456-508: A red light-emitting diode. GaAsP was the basis for the first wave of commercial LEDs emitting visible light. It was mass produced by the Monsanto and Hewlett-Packard companies and used widely for displays in calculators and wrist watches. M. George Craford , a former graduate student of Holonyak, invented the first yellow LED and improved the brightness of red and red-orange LEDs by a factor of ten in 1972. In 1976, T. P. Pearsall designed

1547-601: A series of popular modems for the S-100 bus and Apple II computers that could directly dial out, answer incoming calls, and hang up entirely from software, the basic requirements of a bulletin board system (BBS). The seminal CBBS for instance was created on an S-100 machine with a Hayes internal modem, and a number of similar systems followed. Echo cancellation became a feature of modems in this period, which allowed both modems to ignore their own reflected signals. This way both modems can simultaneously transmit and receive over

1638-550: Is difficult but desirable since it takes advantage of existing semiconductor manufacturing infrastructure. It allows for the wafer-level packaging of LED dies resulting in extremely small LED packages. GaN is often deposited using metalorganic vapour-phase epitaxy (MOCVD), and it also uses lift-off . Even though white light can be created using individual red, green and blue LEDs, this results in poor color rendering , since only three narrow bands of wavelengths of light are being emitted. The attainment of high efficiency blue LEDs

1729-492: Is difficult on silicon , while others, like the University of Cambridge, choose a multi-layer structure, in order to reduce (crystal) lattice mismatch and different thermal expansion ratios, to avoid cracking of the LED chip at high temperatures (e.g. during manufacturing), reduce heat generation and increase luminous efficiency. Sapphire substrate patterning can be carried out with nanoimprint lithography . GaN-on-Si

1820-794: Is more apparent with higher concentrations of Ce:YAG in phosphor-silicone mixtures, because the Ce:YAG decomposes with use. The output of LEDs can shift to yellow over time due to degradation of the silicone. There are several variants of Ce:YAG, and manufacturers in many cases do not reveal the exact composition of their Ce:YAG offerings. Several other phosphors are available for phosphor-converted LEDs to produce several colors such as red, which uses nitrosilicate phosphors, and many other kinds of phosphor materials exist for LEDs such as phosphors based on oxides, oxynitrides, oxyhalides, halides, nitrides, sulfides, quantum dots, and inorganic-organic hybrid semiconductors. A single LED can have several phosphors at

1911-438: Is near the theoretical Shannon limit of a phone line. While 56 kbit/s speeds had been available for leased-line modems for some time, they did not become available for dial up modems until the late 1990s. In the late 1990s, technologies to achieve speeds above 33.6 kbit/s began to be introduced. Several approaches were used, but all of them began as solutions to a single fundamental problem with phone lines. By

SECTION 20

#1732787242264

2002-599: Is perceived as white light, with improved color rendering compared to wavelengths from the blue LED/YAG phosphor combination. The first white LEDs were expensive and inefficient. The light output then increased exponentially . The latest research and development has been propagated by Japanese manufacturers such as Panasonic and Nichia , and by Korean and Chinese manufacturers such as Samsung , Solstice, Kingsun, Hoyol and others. This trend in increased output has been called Haitz's law after Roland Haitz. Light output and efficiency of blue and near-ultraviolet LEDs rose and

2093-451: Is to use individual LEDs that emit three primary colors —red, green and blue—and then mix all the colors to form white light. The other is to use a phosphor material to convert monochromatic light from a blue or UV LED to broad-spectrum white light, similar to a fluorescent lamp . The yellow phosphor is cerium -doped YAG crystals suspended in the package or coated on the LED. This YAG phosphor causes white LEDs to appear yellow when off, and

2184-934: The Nobel Prize in Physics in 2014 for "the invention of efficient blue light-emitting diodes, which has enabled bright and energy-saving white light sources." In 1995, Alberto Barbieri at the Cardiff University Laboratory (GB) investigated the efficiency and reliability of high-brightness LEDs and demonstrated a "transparent contact" LED using indium tin oxide (ITO) on (AlGaInP/GaAs). In 2001 and 2002, processes for growing gallium nitride (GaN) LEDs on silicon were successfully demonstrated. In January 2012, Osram demonstrated high-power InGaN LEDs grown on silicon substrates commercially, and GaN-on-silicon LEDs are in production at Plessey Semiconductors . As of 2017, some manufacturers are using SiC as

2275-553: The U.S. patent office issued the two inventors the patent for the GaAs infrared light-emitting diode (U.S. Patent US3293513 ), the first practical LED. Immediately after filing the patent, Texas Instruments (TI) began a project to manufacture infrared diodes. In October 1962, TI announced the first commercial LED product (the SNX-100), which employed a pure GaAs crystal to emit an 890 nm light output. In October 1963, TI announced

2366-698: The VA3400 which performed full-duplex at 1,200 bit/s over a normal phone line. In November 1976, AT&T introduced the 212A modem, similar in design, but using the lower frequency set for transmission. It was not compatible with the VA3400, but it would operate with 103A modem at 300 bit/s. In 1977, Vadic responded with the VA3467 triple modem, an answer-only modem sold to computer center operators that supported Vadic's 1,200-bit/s mode, AT&T's 212A mode, and 103A operation. A significant advance in modems

2457-457: The human eye as a pure ( saturated ) color. Also unlike most lasers, its radiation is not spatially coherent , so it cannot approach the very high intensity characteristic of lasers . By selection of different semiconductor materials , single-color LEDs can be made that emit light in a narrow band of wavelengths from near-infrared through the visible spectrum and into the ultraviolet range. The required operating voltages of LEDs increase as

2548-757: The 1970s, independently made modems compatible with the Bell 103 de facto standard were commonplace. Example models included the Novation CAT and the Anderson-Jacobson . A lower-cost option was the Pennywhistle modem , designed to be built using readily available parts. Teletype machines were granted access to remote networks such as the Teletypewriter Exchange using the Bell 103 modem. AT&T also produced reduced-cost units,

2639-451: The 3-subpixel model for digital displays. The technology uses a gallium nitride semiconductor that emits light of different frequencies modulated by voltage changes. A prototype display achieved a resolution of 6,800 PPI or 3k x 1.5k pixels. In a light-emitting diode, the recombination of electrons and electron holes in a semiconductor produces light (be it infrared, visible or UV), a process called " electroluminescence ". The wavelength of

2730-576: The SAGE director centers scattered around the United States and Canada . Shortly afterwards in 1959, the technology in the SAGE modems was made available commercially as the Bell 101 , which provided 110 bit/s speeds. Bell called this and several other early modems "datasets". Some early modems were based on touch-tone frequencies, such as Bell 400-style touch-tone modems. The Bell 103A standard

2821-521: The Sega version uses the original intro. The game was also notably bizarre for its lineup of fighters, which included a farting monkey, a jumping clown , a sumo wrestler , an ostrich , a caveman , a bodybuilder , a ballerina , a rhinoceros and a " superhero ". These are the characters in the game's lineup of fighters: These are the bosses who appear in One-Player mode. Each boss defeated earns

Ballz - Misplaced Pages Continue

2912-521: The Smartmodem made communications much simpler and more easily accessed. This provided a growing market for other vendors, who licensed the Hayes patents and competed on price or by adding features. This eventually led to legal action over use of the patented Hayes command language. Dial modems generally remained at 300 and 1,200 bit/s (eventually becoming standards such as V.21 and V.22 ) into

3003-489: The balanced gameplay, smooth scaling effects, and humorous sound effects, and concluded, " Ballz takes the increasingly routine genre of fighting games and gives it a new bounce, injecting a wicked sense of humor into the action." They were less enthusiastic about the SNES version, saying that the graphics are better than in the Genesis version, but the irritating new soundtrack, overcomplicated control configuration, and especially

3094-800: The blending of the colors. Since LEDs have slightly different emission patterns, the color balance may change depending on the angle of view, even if the RGB sources are in a single package, so RGB diodes are seldom used to produce white lighting. Nonetheless, this method has many applications because of the flexibility of mixing different colors, and in principle, this mechanism also has higher quantum efficiency in producing white light. There are several types of multicolor white LEDs: di- , tri- , and tetrachromatic white LEDs. Several key factors that play among these different methods include color stability, color rendering capability, and luminous efficacy. Often, higher efficiency means lower color rendering, presenting

3185-1088: The cladding and quantum well layers for ultraviolet LEDs, but these devices have not yet reached the level of efficiency and technological maturity of InGaN/GaN blue/green devices. If unalloyed GaN is used in this case to form the active quantum well layers, the device emits near-ultraviolet light with a peak wavelength centred around 365 nm. Green LEDs manufactured from the InGaN/GaN system are far more efficient and brighter than green LEDs produced with non-nitride material systems, but practical devices still exhibit efficiency too low for high-brightness applications. With AlGaN and AlGaInN , even shorter wavelengths are achievable. Near-UV emitters at wavelengths around 360–395 nm are already cheap and often encountered, for example, as black light lamp replacements for inspection of anti- counterfeiting UV watermarks in documents and bank notes, and for UV curing . Substantially more expensive, shorter-wavelength diodes are commercially available for wavelengths down to 240 nm. As

3276-510: The connection between devices was normally manual, using an attached telephone handset . By the 1970s, higher speeds of 1,200 and 2,400 bit/s for asynchronous dial connections, 4,800 bit/s for synchronous leased line connections and 35 kbit/s for synchronous conditioned leased lines were available. By the 1980s, less expensive 1,200 and 2,400 bit/s dialup modems were being released, and modems working on radio and other systems were available. As device sophistication grew rapidly in

3367-417: The cost of reliable devices fell. This led to relatively high-power white-light LEDs for illumination, which are replacing incandescent and fluorescent lighting. Experimental white LEDs were demonstrated in 2014 to produce 303 lumens per watt of electricity (lm/W); some can last up to 100,000 hours. Commercially available LEDs have an efficiency of up to 223 lm/W as of 2018. A previous record of 135 lm/W

3458-522: The definition of a modem may have been the multiplexers used by news wire services in the 1920s. In 1941, the Allies developed a voice encryption system called SIGSALY which used a vocoder to digitize speech, then encrypted the speech with one-time pad and encoded the digital data as tones using frequency shift keying. This was also a digital modulation technique, making this an early modem. Commercial modems largely did not become available until

3549-417: The digitization itself placed constraints on the types of waveforms that could be reliably encoded. The first problem was that the process of analog-to-digital conversion is intrinsically lossy, but second, and more importantly, the digital signals used by the telcos were not "linear": they did not encode all frequencies the same way, instead utilizing a nonlinear encoding ( μ-law and a-law ) meant to favor

3640-533: The draft of a new 56 kbit/s standard V.90 with strong industry support. Incompatible with either existing standard, it was an amalgam of both, but was designed to allow both types of modem by a firmware upgrade. The V.90 standard was approved in September 1998 and widely adopted by ISPs and consumers. Light-emitting diode A light-emitting diode ( LED ) is a semiconductor device that emits light when current flows through it. Electrons in

3731-1075: The earliest LEDs emitted low-intensity infrared (IR) light. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics. The first visible-light LEDs were of low intensity and limited to red. Early LEDs were often used as indicator lamps, replacing small incandescent bulbs , and in seven-segment displays . Later developments produced LEDs available in visible , ultraviolet (UV), and infrared wavelengths with high, low, or intermediate light output, for instance, white LEDs suitable for room and outdoor lighting. LEDs have also given rise to new types of displays and sensors, while their high switching rates are useful in advanced communications technology with applications as diverse as aviation lighting , fairy lights , strip lights , automotive headlamps , advertising, general lighting , traffic signals , camera flashes, lighted wallpaper , horticultural grow lights , and medical devices. LEDs have many advantages over incandescent light sources, including lower power consumption,

Ballz - Misplaced Pages Continue

3822-543: The emitted wavelengths become shorter (higher energy, red to blue), because of their increasing semiconductor band gap. Blue LEDs have an active region consisting of one or more InGaN quantum wells sandwiched between thicker layers of GaN, called cladding layers. By varying the relative In/Ga fraction in the InGaN quantum wells, the light emission can in theory be varied from violet to amber. Aluminium gallium nitride (AlGaN) of varying Al/Ga fraction can be used to manufacture

3913-496: The field of luminescence with research on radium . Hungarian Zoltán Bay together with György Szigeti patenting a lighting device in Hungary in 1939 based on silicon carbide, with an option on boron carbide, that emitted white, yellowish white, or greenish white depending on impurities present. Kurt Lehovec , Carl Accardo, and Edward Jamgochian explained these first LEDs in 1951 using an apparatus employing SiC crystals with

4004-612: The first commercial hemispherical LED, the SNX-110. In the 1960s, several laboratories focused on LEDs that would emit visible light. A particularly important device was demonstrated by Nick Holonyak on October 9, 1962, while he was working for General Electric in Syracuse, New York . The device used the semiconducting alloy gallium phosphide arsenide (GaAsP). It was the first semiconductor laser to emit visible light, albeit at low temperatures. At room temperature it still functioned as

4095-521: The first commercially available blue LED, based on the indirect bandgap semiconductor, silicon carbide (SiC). SiC LEDs had very low efficiency, no more than about 0.03%, but did emit in the blue portion of the visible light spectrum. In the late 1980s, key breakthroughs in GaN epitaxial growth and p-type doping ushered in the modern era of GaN-based optoelectronic devices. Building upon this foundation, Theodore Moustakas at Boston University patented

4186-721: The first high-brightness, high-efficiency LEDs for optical fiber telecommunications by inventing new semiconductor materials specifically adapted to optical fiber transmission wavelengths. Until 1968, visible and infrared LEDs were extremely costly, on the order of US$ 200 per unit, and so had little practical use. The first commercial visible-wavelength LEDs used GaAsP semiconductors and were commonly used as replacements for incandescent and neon indicator lamps , and in seven-segment displays , first in expensive equipment such as laboratory and electronics test equipment, then later in such appliances as calculators, TVs, radios, telephones, as well as watches. The Hewlett-Packard company (HP)

4277-420: The frequent slowdown combine to make the game much less enjoyable. The four reviewers of Electronic Gaming Monthly had mixed reactions to the SNES version. Two of them praised its original design and good graphics, and the other two praised the humorous sounds, but all but one felt the game was not as enjoyable as other fighting games, with the biggest problem being the fighters' limited set of moves. They gave it

4368-432: The full spectrum of the phone line, improving the available bandwidth. Additional improvements were introduced by quadrature amplitude modulation (QAM) encoding, which increased the number of bits per symbol to four through a combination of phase shift and amplitude. Transmitting at 1,200 baud produced the 4,800 bit/s V.27ter standard, and at 2,400 baud the 9,600 bit/s V.32 . The carrier frequency

4459-407: The important GaN deposition on sapphire substrates and the demonstration of p-type doping of GaN. This new development revolutionized LED lighting, making high-power blue light sources practical, leading to the development of technologies like Blu-ray . Nakamura was awarded the 2006 Millennium Technology Prize for his invention. Nakamura, Hiroshi Amano , and Isamu Akasaki were awarded

4550-710: The late 1950s, when the rapid development of computer technology created demand for a method of connecting computers together over long distances, resulting in the Bell Company and then other businesses producing an increasing number of computer modems for use over both switched and leased telephone lines. Later developments would produce modems that operated over cable television lines , power lines , and various radio technologies , as well as modems that achieved much higher speeds over telephone lines. A dial-up modem transmits computer data over an ordinary switched telephone line that has not been designed for data use. It

4641-601: The late 1980s, many modems could support improved standards like this, and 2,400-bit/s operation was becoming common. Increasing modem speed greatly improved the responsiveness of online systems and made file transfer practical. This led to rapid growth of online services with large file libraries, which in turn gave more reason to own a modem. The rapid update of modems led to a similar rapid increase in BBS use. The introduction of microcomputer systems with internal expansion slots made small internal modems practical. This led to

SECTION 50

#1732787242264

4732-418: The late 1990s and the emergence of smartphones in the 2000s led to the development of ever-faster radio-based systems. Today, modems are ubiquitous and largely invisible, included in almost every mobile computing device in one form or another, and generally capable of speeds on the order of tens or hundreds of megabytes per second. Modems are frequently classified by the maximum amount of data they can send in

4823-431: The late 1990s, telephone-based modems quickly exhausted the available bandwidth , reaching 56 kbit/s. The rise of public use of the internet during the late 1990s led to demands for much higher performance, leading to the move away from audio-based systems to entirely new encodings on cable television lines and short-range signals in subcarriers on telephone lines. The move to cellular telephones , especially in

4914-466: The lengthy introduction of the 28,800 bit/s V.34 standard. While waiting, several companies decided to release hardware and introduced modems they referred to as V.Fast . In order to guarantee compatibility with V.34 modems once a standard was ratified (1994), manufacturers used more flexible components, generally a DSP and microcontroller , as opposed to purpose-designed ASIC modem chips. This would allow later firmware updates to conform with

5005-417: The light depends on the energy band gap of the semiconductors used. Since these materials have a high index of refraction, design features of the devices such as special optical coatings and die shape are required to efficiently emit light. Unlike a laser , the light emitted from an LED is neither spectrally coherent nor even highly monochromatic . Its spectrum is sufficiently narrow that it appears to

5096-420: The light produced is engineered to suit the human eye. Because of metamerism , it is possible to have quite different spectra that appear white. The appearance of objects illuminated by that light may vary as the spectrum varies. This is the issue of color rendition, quite separate from color temperature. An orange or cyan object could appear with the wrong color and much darker as the LED or phosphor does not emit

5187-417: The list, Dan Ryckert , criticized it for its sexual innuendo and its design representing more of a 2D look. Next Generation reviewed the 3DO version of the game, rating it two stars out of five, and stated that "If you accept its looks, it plays fine, but this is as much yesterday's technology as any sprite-based fighter attempting to get away with digitized characters. It's almost too bad, but it's just

5278-824: The market around February 1997; although problems with K56Flex modems were noted in product reviews through July, within six months the two technologies worked equally well, with variations dependent largely on local connection characteristics. The retail price of these early 56k modems was about US$ 200 , compared to $ 100 for standard 33k modems. Compatible equipment was also required at the Internet service providers (ISPs) end, with costs varying depending on whether their current equipment could be upgraded. About half of all ISPs offered 56k support by October 1997. Consumer sales were relatively low, which USRobotics and Rockwell attributed to conflicting standards. In February 1998, The International Telecommunication Union (ITU) announced

5369-518: The market when V.32bis was standardized, which operated at 14,400 bit/s. Rockwell International 's chip division developed a new driver chip set incorporating the V.32bis standard and aggressively priced it. Supra, Inc. arranged a short-term exclusivity arrangement with Rockwell, and developed the SupraFAXModem 14400 based on it. Introduced in January 1992 at $ 399 (or less), it was half

5460-469: The mid-1980s. Commodore's 1982 VicModem for the VIC-20 was the first modem to be sold under $ 100, and the first modem to sell a million units. In 1984, V.22bis was created, a 2,400-bit/s system similar in concept to the 1,200-bit/s Bell 212. This bit rate increase was achieved by defining four or sixteen distinct symbols, which allowed the encoding of two or four bits per symbol instead of only one. By

5551-602: The modem sends a new signal. For example, the ITU-T V.21 standard used audio frequency-shift keying with two possible frequencies, corresponding to two distinct symbols (or one bit per symbol), to carry 300 bits per second using 300 baud. By contrast, the original ITU-T V.22 standard, which could transmit and receive four distinct symbols (two bits per symbol), transmitted 1,200 bits by sending 600 symbols per second (600 baud) using phase-shift keying . Many modems are variable-rate, permitting them to be used over

SECTION 60

#1732787242264

5642-400: The nonlinear response of the human ear to voice signals. This made it very difficult to find a 56 kbit/s encoding that could survive the digitizing process. Modem manufacturers discovered that, while the analog to digital conversion could not preserve higher speeds, digital-to-analog conversions could. Because it was possible for an ISP to obtain a direct digital connection to a telco,

5733-428: The originate-only 113D and the answer-only 113B/C modems. The 201A Data-Phone was a synchronous modem using two-bit-per-symbol phase-shift keying (PSK) encoding, achieving 2,000 bit/s half-duplex over normal phone lines. In this system the two tones for any one side of the connection are sent at similar frequencies as in the 300 bit/s systems, but slightly out of phase. In early 1973, Vadic introduced

5824-448: The phosphors, the Ce:YAG phosphor converts blue light to green and red (yellow) light, and the PFS phosphor converts blue light to red light. The color, emission spectrum or color temperature of white phosphor converted and other phosphor converted LEDs can be controlled by changing the concentration of several phosphors that form a phosphor blend used in an LED package. The 'whiteness' of

5915-599: The photosensitivity of microorganisms approximately matches the absorption spectrum of DNA , with a peak at about 260 nm, UV LED emitting at 250–270 nm are expected in prospective disinfection and sterilization devices. Recent research has shown that commercially available UVA LEDs (365 nm) are already effective disinfection and sterilization devices. UV-C wavelengths were obtained in laboratories using aluminium nitride (210 nm), boron nitride (215 nm) and diamond (235 nm). There are two primary ways of producing white light-emitting diodes. One

6006-564: The price of the slower V.32 modems already on the market. This led to a price war, and by the end of the year V.32 was dead, never having been really established, and V.32bis modems were widely available for $ 250 . V.32bis was so successful that the older high-speed standards had little advantages. USRobotics (USR) fought back with a 16,800 bit/s version of HST, while AT&T introduced a one-off 19,200 bit/s method they referred to as V.32ter , but neither non-standard modem sold well. Consumer interest in these proprietary improvements waned during

6097-421: The rudimentary devices could be used for non-radio communication across a short distance. As noted by Kroemer Braunstein "…had set up a simple optical communications link: Music emerging from a record player was used via suitable electronics to modulate the forward current of a GaAs diode. The emitted light was detected by a PbS diode some distance away. This signal was fed into an audio amplifier and played back by

6188-480: The same time. Some LEDs use phosphors made of glass-ceramic or composite phosphor/glass materials. Alternatively, the LED chips themselves can be coated with a thin coating of phosphor-containing material, called a conformal coating. The temperature of the phosphor during operation and how it is applied limits the size of an LED die. Wafer-level packaged white LEDs allow for extremely small LEDs. In 2024, QPixel introduced as polychromatic LED that could replace

6279-442: The semiconductor recombine with electron holes , releasing energy in the form of photons . The color of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the band gap of the semiconductor. White light is obtained by using multiple semiconductors or a layer of light-emitting phosphor on the semiconductor device. Appearing as practical electronic components in 1962,

6370-449: The signal to recreate the original digital information. The goal is to produce a signal that can be transmitted easily and decoded reliably. Modems can be used with almost any means of transmitting analog signals, from LEDs to radio . Early modems were devices that used audible sounds suitable for transmission over traditional telephone systems and leased lines . These generally operated at 110 or 300 bits per second (bit/s), and

6461-408: The space between the crystals allow some blue light to pass through in LEDs with partial phosphor conversion. Alternatively, white LEDs may use other phosphors like manganese(IV)-doped potassium fluorosilicate (PFS) or other engineered phosphors. PFS assists in red light generation, and is used in conjunction with conventional Ce:YAG phosphor. In LEDs with PFS phosphor, some blue light passes through

6552-467: The standards once ratified. The ITU standard V.34 represents the culmination of these joint efforts. It employed the most powerful coding techniques available at the time, including channel encoding and shape encoding. From the mere four bits per symbol ( 9.6  kbit/s ), the new standards used the functional equivalent of 6 to 10 bits per symbol, plus increasing baud rates from 2,400 to 3,429, to create 14.4, 28.8, and 33.6 kbit/s modems. This rate

6643-547: The subsequent device Pankove and Miller built, the first actual gallium nitride light-emitting diode, emitted green light. In 1974 the U.S. Patent Office awarded Maruska, Rhines, and Stanford professor David Stevenson a patent for their work in 1972 (U.S. Patent US3819974 A ). Today, magnesium-doping of gallium nitride remains the basis for all commercial blue LEDs and laser diodes . In the early 1970s, these devices were too dim for practical use, and research into gallium nitride devices slowed. In August 1989, Cree introduced

6734-480: The substrate for LED production, but sapphire is more common, as it has the most similar properties to that of gallium nitride, reducing the need for patterning the sapphire wafer (patterned wafers are known as epi wafers). Samsung , the University of Cambridge , and Toshiba are performing research into GaN on Si LEDs. Toshiba has stopped research, possibly due to low yields. Some opt for epitaxy , which

6825-569: The team at Fairchild led by optoelectronics pioneer Thomas Brandt to achieve the needed cost reductions. LED producers have continued to use these methods as of about 2009. The early red LEDs were bright enough for use as indicators, as the light output was not enough to illuminate an area. Readouts in calculators were so small that plastic lenses were built over each digit to make them legible. Later, other colors became widely available and appeared in appliances and equipment. Early LEDs were packaged in metal cases similar to those of transistors, with

6916-423: The time technology companies began to investigate speeds above 33.6 kbit/s , telephone companies had switched almost entirely to all-digital networks. As soon as a phone line reached a local central office, a line card converted the analog signal from the subscriber to a digital one and conversely. While digitally encoded telephone lines notionally provide the same bandwidth as the analog systems they replaced,

7007-461: The very inefficient light-producing properties of silicon carbide, the semiconductor Losev used. In 1936, Georges Destriau observed that electroluminescence could be produced when zinc sulphide (ZnS) powder is suspended in an insulator and an alternating electrical field is applied to it. In his publications, Destriau often referred to luminescence as Losev-Light. Destriau worked in the laboratories of Madame Marie Curie , also an early pioneer in

7098-538: The wavelength it reflects. The best color rendition LEDs use a mix of phosphors, resulting in less efficiency and better color rendering. The first white light-emitting diodes (LEDs) were offered for sale in the autumn of 1996. Nichia made some of the first white LEDs which were based on blue LEDs with Ce:YAG phosphor. Ce:YAG is often grown using the Czochralski method . Mixing red, green, and blue sources to produce white light needs electronic circuits to control

7189-499: Was 1,650 Hz in both systems. The introduction of these higher-speed systems also led to the development of the digital fax machine during the 1980s. While early fax technology also used modulated signals on a phone line, digital fax used the now-standard digital encoding used by computer modems. This eventually allowed computers to send and receive fax images. In the early 1990s, V.32 modems operating at 9,600 bit/s were introduced, but were expensive and were only starting to enter

7280-469: Was a proprietary design from USRobotics , which they called "X2" because 56k was twice the speed (×2) of 28k modems. At that time, USRobotics held a 40% share of the retail modem market, while Rockwell International held an 80% share of the modem chipset market. Concerned with being shut out, Rockwell began work on a rival 56k technology. They joined with Lucent and Motorola to develop what they called "K56Flex" or just "Flex". Both technologies reached

7371-618: Was achieved by Nichia in 2010. Compared to incandescent bulbs, this is a huge increase in electrical efficiency, and even though LEDs are more expensive to purchase, overall lifetime cost is significantly cheaper than that of incandescent bulbs. The LED chip is encapsulated inside a small, plastic, white mold although sometimes an LED package can incorporate a reflector. It can be encapsulated using resin ( polyurethane -based), silicone, or epoxy containing (powdered) Cerium-doped YAG phosphor particles. The viscosity of phosphor-silicon mixtures must be carefully controlled. After application of

7462-415: Was engaged in research and development (R&D) on practical LEDs between 1962 and 1968, by a research team under Howard C. Borden, Gerald P. Pighini at HP Associates and HP Labs . During this time HP collaborated with Monsanto Company on developing the first usable LED products. The first usable LED products were HP's LED display and Monsanto's LED indicator lamp , both launched in 1968. Monsanto

7553-458: Was integrated into devices from many other manufacturers. Automatic dialing was not a new capability—it had been available via separate Automatic Calling Units , and via modems using the X.21 interface —but the Smartmodem made it available in a single device that could be used with even the most minimal implementations of the ubiquitous RS-232 interface, making this capability accessible from virtually any system or language. The introduction of

7644-412: Was introduced by AT&T in 1962. It provided full-duplex service at 300 bit/s over normal phone lines. Frequency-shift keying was used, with the call originator transmitting at 1,070 or 1,270  Hz and the answering modem transmitting at 2,025 or 2,225 Hz. The 103 modem would eventually become a de facto standard once third-party (non-AT&T modems) reached the market, and throughout

7735-433: Was made at Stanford University in 1972 by Herb Maruska and Wally Rhines , doctoral students in materials science and engineering. At the time Maruska was on leave from RCA Laboratories , where he collaborated with Jacques Pankove on related work. In 1971, the year after Maruska left for Stanford, his RCA colleagues Pankove and Ed Miller demonstrated the first blue electroluminescence from zinc-doped gallium nitride, though

7826-548: Was once a widely known technology, mass-marketed globally dial-up internet access . In the 1990s, tens of millions of people in the United States alone used dial-up modems for internet access. Dial-up service has since been largely superseded by broadband internet , such as DSL . Mass production of telephone line modems in the United States began as part of the SAGE air-defense system in 1958, connecting terminals at various airbases, radar sites, and command-and-control centers to

7917-493: Was originally intended for use with the Edge 16, a modem system for multiplayer gaming which was eventually cancelled. The opening PF.Magic developed for the game stated "To be the champion, you gotta have Ballz !". Due to its racy double-entendre ("balls" may be used as a slang term for testicles), Nintendo demanded the wording be changed for the SNES version. The SNES version of the game states "...you gotta play Ballz ", while

8008-443: Was quickly followed by the development of the first white LED . In this device a Y 3 Al 5 O 12 :Ce (known as " YAG " or Ce:YAG phosphor) cerium -doped phosphor coating produces yellow light through fluorescence . The combination of that yellow with remaining blue light appears white to the eye. Using different phosphors produces green and red light through fluorescence. The resulting mixture of red, green and blue

8099-536: Was the Hayes Smartmodem , introduced in 1981. The Smartmodem was an otherwise standard 103A 300 bit/s direct-connect modem, but it introduced a command language which allowed the computer to make control requests, such as commands to dial or answer calls, over the same RS-232 interface used for the data connection. The command set used by this device became a de facto standard, the Hayes command set , which

8190-571: Was the first intelligent LED display, and was a revolution in digital display technology, replacing the Nixie tube and becoming the basis for later LED displays. In the 1970s, commercially successful LED devices at less than five cents each were produced by Fairchild Optoelectronics. These devices employed compound semiconductor chips fabricated with the planar process (developed by Jean Hoerni , ). The combination of planar processing for chip fabrication and innovative packaging methods enabled

8281-484: Was the first organization to mass-produce visible LEDs, using Gallium arsenide phosphide (GaAsP) in 1968 to produce red LEDs suitable for indicators. Monsanto had previously offered to supply HP with GaAsP, but HP decided to grow its own GaAsP. In February 1969, Hewlett-Packard introduced the HP Model 5082-7000 Numeric Indicator, the first LED device to use integrated circuit (integrated LED circuit ) technology. It

#263736