Misplaced Pages

#887112

67-625: The Bristol Siddeley Orpheus is a single-spool turbojet developed by Bristol Siddeley for various light fighter /trainer applications such as the Folland Gnat and the Fiat G.91 . Later, the Orpheus formed the core of the first Bristol Pegasus vectored thrust turbofan used in the Harrier family. The engine had its genesis in a 1952 request by Teddy Petter of Folland for an engine in

134-416: A i r + m ˙ f ) V j − m ˙ a i r V {\displaystyle F_{N}=({\dot {m}}_{air}+{\dot {m}}_{f})V_{j}-{\dot {m}}_{air}V} where: If the speed of the jet is equal to sonic velocity the nozzle is said to be " choked ". If the nozzle is choked, the pressure at the nozzle exit plane

201-585: A gas turbine to power an aircraft was filed in 1921 by Frenchman Maxime Guillaume . His engine was to be an axial-flow turbojet, but was never constructed, as it would have required considerable advances over the state of the art in compressors. In 1928, British RAF College Cranwell cadet Frank Whittle formally submitted his ideas for a turbojet to his superiors. In October 1929 he developed his ideas further. On 16 January 1930 in England, Whittle submitted his first patent (granted in 1932). The patent showed

268-542: A landing field, lengthening flights. The increase in reliability that came with the turbojet enabled three- and two-engine designs, and more direct long-distance flights. High-temperature alloys were a reverse salient , a key technology that dragged progress on jet engines. Non-UK jet engines built in the 1930s and 1940s had to be overhauled every 10 or 20 hours due to creep failure and other types of damage to blades. British engines, however, utilised Nimonic alloys which allowed extended use without overhaul, engines such as

335-414: A large-diameter shaft for its single spool which then needed only two bearings. The weight savings from deleting a bearing and associated parts listed below gave an engine with a thrust of 5,000 lbf but weighing only 800 lb. Eliminating the usual centre support bearing for the shaft joining the compressor and turbine meant the shaft would whirl, assuming a bowed shape, and damage the engine. Whirling

402-486: A lasting acquaintance. In August 1914 Douai was captured by the Germans, and German officers occupied the family mansion. Michel made visits to the occupied La Brayelle airfield. The Germans took little notice of the disabled young man and, understanding German, he was able to observe the activities and take extensive notes. He also met Anthony Fokker , who was staying with family friends while demonstrating his designs to

469-593: A lower deck bar and restaurant was named the Air-Wibault 1.00. The prototype was completed, but only three engines could be obtained, and it was destroyed in an air raid on the Arsenal works at Villacoublay on 3 June 1940. It is said that Wibault himself set fire to it to stop it falling into German hands. On 17 June 1940 Wibault escaped with his wife Marie-Rose from Paris to London where Charles de Gaulle appointed him as technical director of France Forever ,

536-705: A model which was successfully tested in the Eiffel aerodynamic laboratory . With French engineer Paul Boccaccio, in 1918 he designed and built his first aeroplane, the Wibault-Boccaccio & Cie C.1 fighter powered by a 220hp Hispano-Suiza engine. Tests were very successful, achieving a top speed of 237km/h and an altitude of 7,500m, but development was abandoned at the end of the war. In 1919 Wibault founded Société des Avions Michel Wibault at Billancourt , with various aircraft, mostly parasol monoplanes of Duralumin construction, flying from 1920. At first

603-459: A second generation SST engine using the 593 core were done more than three years before Concorde entered service. They evaluated bypass engines with bypass ratios between 0.1 and 1.0 to give improved take-off and cruising performance. Nevertheless, the 593 met all the requirements of the Concorde programme. Estimates made in 1964 for the Concorde design at Mach 2.2 showed the penalty in range for

670-411: A significant impact on commercial aviation . Aside from giving faster flight speeds turbojets had greater reliability than piston engines, with some models demonstrating dispatch reliability rating in excess of 99.9%. Pre-jet commercial aircraft were designed with as many as four engines in part because of concerns over in-flight failures. Overseas flight paths were plotted to keep planes within an hour of

737-405: A small helicopter engine compressor rotates around 50,000 RPM. Turbojets supply bleed air from the compressor to the aircraft for the operation of various sub-systems. Examples include the environmental control system , anti-icing , and fuel tank pressurization. The engine itself needs air at various pressures and flow rates to keep it running. This air comes from the compressor, and without it,

SECTION 10

#1732779984888

804-563: A support organisation for de Gaulle in the USA, and he was very active in the group. Moving to America, Wibault joined Republic Aviation where he worked with the company’s major driving force and chief designer Alexander Kartveli . Kartveli, a Soviet émigré, had trained at an aviation school in Paris and then worked for Louis Bleriot , and for the Wibault company, leaving for America in 1927, and

871-513: A turbojet application, where the output from the gas turbine is used in a propelling nozzle, raising the turbine temperature increases the jet velocity. At normal subsonic speeds this reduces the propulsive efficiency, giving an overall loss, as reflected by the higher fuel consumption, or SFC. However, for supersonic aircraft this can be beneficial, and is part of the reason why the Concorde employed turbojets. Turbojet systems are complex systems therefore to secure optimal function of such system, there

938-512: A turbojet engine is always subsonic, regardless of the speed of the aircraft itself. The intake has to supply air to the engine with an acceptably small variation in pressure (known as distortion) and having lost as little energy as possible on the way (known as pressure recovery). The ram pressure rise in the intake is the inlet's contribution to the propulsion system's overall pressure ratio and thermal efficiency . The intake gains prominence at high speeds when it generates more compression than

1005-494: A turbojet is high enough at higher thrust settings to cause the nozzle to choke. If, however, a convergent-divergent de Laval nozzle is fitted, the divergent (increasing flow area) section allows the gases to reach supersonic velocity within the divergent section. Additional thrust is generated by the higher resulting exhaust velocity. Thrust was most commonly increased in turbojets with water/methanol injection or afterburning . Some engines used both methods. Liquid injection

1072-487: A two-stage axial compressor feeding a single-sided centrifugal compressor . Practical axial compressors were made possible by ideas from A.A. Griffith in a seminal paper in 1926 ("An Aerodynamic Theory of Turbine Design"). Whittle later concentrated on the simpler centrifugal compressor only, for a variety of practical reasons. A Whittle engine was the first turbojet to run, the Power Jets WU , on 12 April 1937. It

1139-481: A vertical take-off and landing ground-attack Gyropter using the most powerful turboshaft engine then available, a Bristol Orion , driving four centrifugal compressors mounted on the sides of the airframe around the centre of gravity . The compressor outlet nozzles were able to swivel between pointing straight down for take-off and landing, and pointing horizontally backwards for forward flight. He obtained patents for his vectored thrust design. Unable to interest

1206-410: Is a call for the newer models being developed to advance its control systems to implement the newest knowledge from the areas of automation, so increase its safety and effectiveness. Michel Wibault Michel Henri Marie Joseph Wibault (born 5 June 1897, died 23 January 1963) was a French aircraft designer. He was a strong advocate of metal construction, and his airliners were important in

1273-413: Is a component of a turbojet used to divert air into the intake, in front of the accessory drive and to house the starter motor. An intake, or tube, is needed in front of the compressor to help direct the incoming air smoothly into the rotating compressor blades. Older engines had stationary vanes in front of the moving blades. These vanes also helped to direct the air onto the blades. The air flowing into

1340-754: Is also preserved as a relic in India's first aerospace museum in Hindustan Aerospace Heritage Centre, Bangalore . Data from Jane's All the World's Aircraft 1962-63. Related development Comparable engines Related lists Turbojet Turbojets have poor efficiency at low vehicle speeds, which limits their usefulness in vehicles other than aircraft. Turbojet engines have been used in isolated cases to power vehicles other than aircraft, typically for attempts on land speed records . Where vehicles are "turbine-powered", this

1407-523: Is greater than atmospheric pressure, and extra terms must be added to the above equation to account for the pressure thrust. The rate of flow of fuel entering the engine is very small compared with the rate of flow of air. If the contribution of fuel to the nozzle gross thrust is ignored, the net thrust is: F N = m ˙ a i r ( V j − V ) {\displaystyle F_{N}={\dot {m}}_{air}(V_{j}-V)} The speed of

SECTION 20

#1732779984888

1474-573: Is modelled approximately by the Brayton cycle . The efficiency of a gas turbine is increased by raising the overall pressure ratio, requiring higher-temperature compressor materials, and raising the turbine entry temperature, requiring better turbine materials and/or improved vane/blade cooling. It is also increased by reducing the losses as the flow progresses from the intake to the propelling nozzle. These losses are quantified by compressor and turbine efficiencies and ducting pressure losses. When used in

1541-589: Is more commonly by use of a turboshaft engine, a development of the gas turbine engine where an additional turbine is used to drive a rotating output shaft. These are common in helicopters and hovercraft. Turbojets were widely used for early supersonic fighters , up to and including many third generation fighters , with the MiG-25 being the latest turbojet-powered fighter developed. As most fighters spend little time traveling supersonically, fourth-generation fighters (as well as some late third-generation fighters like

1608-596: The Bluebird K7 hydroplane in which Donald Campbell was killed whilst attempting the water speed record on Lake Coniston in 1967. A dragster powered by an Orpheus, the "Vampire" , is the current holder of the British land speed record . Preserved Bristol Siddeley Orpheus engines are on display at Aerospace Bristol , at the Midland Air Museum , Coventry , and at Solent Sky , Southampton . One

1675-621: The F-111 and Hawker Siddeley Harrier ) and subsequent designs are powered by the more efficient low-bypass turbofans and use afterburners to raise exhaust speed for bursts of supersonic travel. Turbojets were used on Concorde and the longer-range versions of the Tu-144 which were required to spend a long period travelling supersonically. Turbojets are still common in medium range cruise missiles , due to their high exhaust speed, small frontal area, and relative simplicity. The first patent for using

1742-704: The Gloster Meteor , entered service in 1944, towards the end of World War II , the Me 262 in April and the Gloster Meteor in July. Only about 15 Meteor saw WW2 action but up to 1400 Me 262s were produced, with 300 entering combat, delivering the first ground attacks and air combat victories of jet planes. Air is drawn into the rotating compressor via the intake and is compressed to a higher pressure before entering

1809-588: The Heinkel HeS 3 ), or an axial compressor (as in the Junkers Jumo 004 ) which gave a smaller diameter, although longer, engine. By replacing the propeller used on piston engines with a high speed jet of exhaust, higher aircraft speeds were attainable. One of the last applications for a turbojet engine was Concorde which used the Olympus 593 engine. However, joint studies by Rolls-Royce and Snecma for

1876-527: The North American XB-70 Valkyrie , each feeding three engines with an intake airflow of about 800 pounds per second (360 kg/s). The turbine rotates the compressor at high speed, adding energy to the airflow while squeezing (compressing) it into a smaller space. Compressing the air increases its pressure and temperature. The smaller the compressor, the faster it turns. The (large) GE90-115B fan rotates at about 2,500 RPM, while

1943-488: The Rolls-Royce Welland and Rolls-Royce Derwent , and by 1949 the de Havilland Goblin , being type tested for 500 hours without maintenance. It was not until the 1950s that superalloy technology allowed other countries to produce economically practical engines. Early German turbojets had severe limitations on the amount of running they could do due to the lack of suitable high temperature materials for

2010-424: The Tu-144 , also used afterburners as does Scaled Composites White Knight , a carrier aircraft for the experimental SpaceShipOne suborbital spacecraft. Reheat was flight-trialled in 1944 on the W.2/700 engines in a Gloster Meteor I . The net thrust F N {\displaystyle F_{N}\;} of a turbojet is given by: F N = ( m ˙

2077-781: The Vickers Wibault Scout (based on the Wibault 7 ) - 26 of which were bought by the Chilean Air Force - the Vickers Vireo and Jockey fighters, and the Viastra , Vellore and Vellox civil transports. In 1930 French shipbuilders Penhoët (Chantiers St. Nazaire) funded construction of the Wibault-Penhoët 280-T low-wing trimotor transport. This was the first of a series of airliners that

Bristol Siddeley Orpheus - Misplaced Pages Continue

2144-404: The 1950s were looking at ways of producing a vertical take off and landing aircraft. Michel Wibault had the idea of using a turboshaft engine to drive four large centrifugal blowers which could be swivelled to vector the thrust. Hooker's engineers decided on using the Orpheus gas generator to drive a single large fan that would supply air to a pair of rotating nozzles, while the exhaust flow from

2211-415: The 5,000  pounds (22  kN ) class to power a new trainer and lightweight fighter-bomber they were developing. Stanley Hooker , relatively new to the company after an earlier career at Rolls-Royce , took the project under his wing. He delivered a relatively simple and easy to maintain engine, which was put into use in the Folland Gnat , flying in 1955. The Orpheus incorporated the novel feature of

2278-655: The French government or industry in the idea, in 1955 Wibault submitted it to the NATO Mutual Weapons Development Programme and was subsequently introduced to Stanley Hooker who was then technical director of Bristol Engines . Soon Wibault agreed to work with Bristol, and they worked to lighten and simplify the engine design, leading to a new patent in 1957, jointly authored by Michel Wibault and Hooker’s assistant, Gordon Lewis . Meanwhile, Hawker’s chief designer Sidney Camm , noting

2345-550: The Germans. Michel built his own wind tunnel for testing models. Disliking the Germans, he was able to move to Belgium and then to Switzerland where he developed his ideas. In March 1917 Wibault presented a fighter design to Lieutenant-Colonel Émile Dorand , Director of the Technical Section of Military Aeronautics (STAé) in Paris, and with financial assistance from his maternal uncle, made in December 1917, built

2412-593: The Orpheus 701 had a 7-stage axial compressor driven by a single stage turbine. In 1957 NATO ran a competition for a light fighter design. All three finalists chose the Bristol Orpheus and as a result a substantial contribution towards the cost of the initial engine development was made available from the Mutual Weapons Development Program . The winner of the competition, the Fiat G.91 R and G.91T, used Fiat-built versions of

2479-437: The Orpheus also included the innovation of incorporating the turbine entry duct and its stator vanes into the flame tube outlet, each flame tube providing one seventh of the overall duct. This had two advantages, it simplified the manufacture of a complicated and unreliable component, also the segmented design allowed easier allowance for thermal expansion. Developing a Sea Level Static thrust of 4,520  lbf (20.1  kN ),

2546-550: The Orpheus was split into two and would supply another pair of nozzles at the rear of the engine. This experimental system developed into the Pegasus. Licences to produce the Orpheus were obtained by Fiat S.p.A. , SNECMA and - as the TJ37 - Curtiss-Wright . Data from Jane's All the World's Aircraft 1962-63 ., Aircraft engines of the World 1957 Orpheus engines, numbers 709 (destroyed by FOD in testing) and 711 (running) powered

2613-438: The age of four, Michel was disabled by polio affecting all his limbs. As a result, he did not attend school, and was entirely home- and self-educated. He also had a German nanny. His disability precluded him from military service. During his childhood he often visited La Brayelle Airfield , where the world's first aviation meeting took place. It was home to the workshops of Louis Breguet whom he met and with whom he later formed

2680-464: The aircraft decreases the efficiency of the engine because it has been compressed, but then does not contribute to producing thrust. Compressor types used in turbojets were typically axial or centrifugal. Early turbojet compressors had low pressure ratios up to about 5:1. Aerodynamic improvements including splitting the compressor into two separately rotating parts, incorporating variable blade angles for entry guide vanes and stators, and bleeding air from

2747-449: The aircraft were all military types, with Wibault turning to civil transports from 1930. Wibault became a consulting engineer for Vickers , starting in 1922. As a pioneer of metal construction for which he held patents, he closely followed the design methods of Hugo Junkers and Caudius Dornier . Wibault and Vickers jointly developed more metal construction patents. By 1925 Vickers had adopted Wibault’s construction methods, and produced

Bristol Siddeley Orpheus - Misplaced Pages Continue

2814-477: The best engines the writer has ever used in a prototype aircraft. They were and are so good that it was decided at an early date to make all Jetstars from serial number two up capable of using two Orpheus engines (as an alternative to four American units). The Orpheus version ... is fully competitive in performance (except with one engine out) and will be offered to those who want its lower cost, simplicity, and - at least for some time - reliability". Many companies in

2881-410: The combustion chamber. Fuel is mixed with the compressed air and burns in the combustor. The combustion products leave the combustor and expand through the turbine where power is extracted to drive the compressor. The turbine exit gases still contain considerable energy that is converted in the propelling nozzle to a high speed jet. The first turbojets, used either a centrifugal compressor (as in

2948-432: The combustor and pass through to the turbine in a continuous flowing process with no pressure build-up. Instead, a small pressure loss occurs in the combustor. The fuel-air mixture can only burn in slow-moving air, so an area of reverse flow is maintained by the fuel nozzles for the approximately stoichiometric burning in the primary zone. Further compressed air is introduced which completes the combustion process and reduces

3015-421: The compressor enabled later turbojets to have overall pressure ratios of 15:1 or more. After leaving the compressor, the air enters the combustion chamber. The burning process in the combustor is significantly different from that in a piston engine . In a piston engine, the burning gases are confined to a small volume, and as the fuel burns, the pressure increases. In a turbojet, the air and fuel mixture burn in

3082-401: The compressor is passed through these to keep the metal temperature within limits. The remaining stages do not need cooling. In the first stage, the turbine is largely an impulse turbine (similar to a pelton wheel ) and rotates because of the impact of the hot gas stream. Later stages are convergent ducts that accelerate the gas. Energy is transferred into the shaft through momentum exchange in

3149-536: The compressor stage. Well-known examples are the Concorde and Lockheed SR-71 Blackbird propulsion systems where the intake and engine contributions to the total compression were 63%/8% at Mach 2 and 54%/17% at Mach 3+. Intakes have ranged from "zero-length" on the Pratt & Whitney TF33 turbofan installation in the Lockheed C-141 Starlifter , to the twin 65 feet (20 m) long, intakes on

3216-556: The development of French commercial aviation in the 1930s. He is especially known for his invention of vectored thrust for aircraft, which led to the development of the V/STOL Hawker Siddeley Harrier . Michel Wibault was born in Douai , near Lille , France , on 5 June 1897 to Achille and Madelaine Wibault. Achille owned a chain of about a hundred grocery shops. They had three sons and three daughters. At

3283-565: The engine. Other users, mostly trainers, soon followed, including the Fuji T-1 , HAL HF-24 Marut , HA-300 , and the experimental Hunting H.126 and Short SB5 . For later civilian applications, the Orpheus was chosen, after use of two each on the prototypes, as an option on the Lockheed JetStar , Lockheed's Vice President and head of the famous Skunk Works , Clarence "Kelly" Johnson stating; "These Orpheus engines ... have been

3350-475: The high-temperature materials used in their turbosuperchargers during World War II. Water injection was a common method used to increase thrust, usually during takeoff, in early turbojets that were thrust-limited by their allowable turbine entry temperature. The water increased thrust at the temperature limit, but prevented complete combustion, often leaving a very visible smoke trail. Allowable turbine entry temperatures have increased steadily over time both with

3417-441: The introduction of superior alloys and coatings, and with the introduction and progressive effectiveness of blade cooling designs. On early engines, the turbine temperature limit had to be monitored, and avoided, by the pilot, typically during starting and at maximum thrust settings. Automatic temperature limiting was introduced to reduce pilot workload and reduce the likelihood of turbine damage due to over-temperature. A nose bullet

SECTION 50

#1732779984888

3484-401: The jet V j {\displaystyle V_{j}\;} must exceed the true airspeed of the aircraft V {\displaystyle V\;} if there is to be a net forward thrust on the airframe. The speed V j {\displaystyle V_{j}\;} can be calculated thermodynamically based on adiabatic expansion . The operation of a turbojet

3551-402: The opposite way to energy transfer in the compressor. The power developed by the turbine drives the compressor and accessories, like fuel, oil, and hydraulic pumps that are driven by the accessory gearbox. After the turbine, the gases expand through the exhaust nozzle producing a high velocity jet. In a convergent nozzle, the ducting narrows progressively to a throat. The nozzle pressure ratio on

3618-425: The static parts of the three bearings. With two bearings, the shaft simply followed the straight line between them. So the introduction of the large diameter tube allowed the removal of a bearing, a coupling, the engine's support structure for that bearing together with its lubrication system and cooling air supply. A cannular combustor was used with seven flame tubes. This was a recent development in jet engines and

3685-727: The success of the Ryan X-13 Vertijet , had developed an interest in VTOL aircraft, which he expressed in a letter to Hooker, and thus the scene was set for the development of the Bristol Siddeley Pegasus engine. This was at the heart of the Hawker P.1127 design that evolved into the Hawker Siddeley Harrier . In March 1930 he married Marie-Rose Boistel. In 1931 he was appointed a Chevalier of

3752-468: The supersonic airliner, in terms of miles per gallon, compared to subsonic airliners at Mach 0.85 (Boeing 707, DC-8) was relatively small. This is because the large increase in drag is largely compensated by an increase in powerplant efficiency (the engine efficiency is increased by the ram pressure rise which adds to the compressor pressure rise, the higher aircraft speed approaches the exhaust jet speed increasing propulsive efficiency). Turbojet engines had

3819-446: The temperature of the combustion products to a level which the turbine can accept. Less than 25% of the air is typically used for combustion, as an overall lean mixture is required to keep within the turbine temperature limits. Hot gases leaving the combustor expand through the turbine. Typical materials for turbines include inconel and Nimonic . The hottest turbine vanes and blades in an engine have internal cooling passages. Air from

3886-548: The thrust from a turbojet engine. It was flown by test pilot Erich Warsitz . The Gloster E.28/39 , (also referred to as the "Gloster Whittle", "Gloster Pioneer", or "Gloster G.40") made the first British jet-engined flight in 1941. It was designed to test the Whittle jet engine in flight, and led to the development of the Gloster Meteor. The first two operational turbojet aircraft, the Messerschmitt Me 262 and then

3953-412: The turbines would overheat, the lubricating oil would leak from the bearing cavities, the rotor thrust bearings would skid or be overloaded, and ice would form on the nose cone. The air from the compressor, called secondary air, is used for turbine cooling, bearing cavity sealing, anti-icing, and ensuring that the rotor axial load on its thrust bearing will not wear it out prematurely. Supplying bleed air to

4020-471: The turbines. British engines such as the Rolls-Royce Welland used better materials giving improved durability. The Welland was type-certified for 80 hours initially, later extended to 150 hours between overhauls, as a result of an extended 500-hour run being achieved in tests. General Electric in the United States was in a good position to enter the jet engine business due to its experience with

4087-480: The war, Wibault divided his time between New York and Paris. He became increasingly interested in vertical take-off and landing ( VTOL ) aircraft, with projects ranging from interceptors to large airliners, most of which he classified as a “Gyropter” (French – “Gyroptère”). His starting point was a circular aircraft comparable to the Avro Canada VZ-9 Avrocar . In 1954, one of his projects was for

SECTION 60

#1732779984888

4154-686: Was a strong proponent of metal construction methods. For Republic, Wibault worked on the design of the XF-12 Rainbow , and the RC-3 Seabee . While in New York in 1940, Wibault met Winthrop Rockefeller , the billionaire politician and philanthropist, who was to finance Wibault for the rest of his career, mainly through an entity called the Vibrane Corporation which supported him and sponsored his US patent applications. After

4221-424: Was liquid-fuelled. Whittle's team experienced near-panic during the first start attempts when the engine accelerated out of control to a relatively high speed despite the fuel supply being cut off. It was subsequently found that fuel had leaked into the combustion chamber during pre-start motoring checks and accumulated in pools, so the engine would not stop accelerating until all the leaked fuel had burned off. Whittle

4288-419: Was prevented by using a large diameter tube in place of the usual small diameter shaft. The large-diameter thin-walled tube, more than 8 inches in diameter was stiff enough to raise the whirling speed beyond the engine running range using only two bearings instead of the usual three. Two bearings gave a further advantage: previous engines had also needed a coupling in the shaft to allow for any misalignment between

4355-640: Was tested on the Power Jets W.1 in 1941 initially using ammonia before changing to water and then water-methanol. A system to trial the technique in the Gloster E.28/39 was devised but never fitted. An afterburner or "reheat jetpipe" is a combustion chamber added to reheat the turbine exhaust gases. The fuel consumption is very high, typically four times that of the main engine. Afterburners are used almost exclusively on supersonic aircraft , most being military aircraft. Two supersonic airliners, Concorde and

4422-485: Was unable to interest the government in his invention, and development continued at a slow pace. In Germany, Hans von Ohain patented a similar engine in 1935. His design, an axial-flow engine, as opposed to Whittle's centrifugal flow engine, was eventually adopted by most manufacturers by the 1950s. On 27 August 1939 the Heinkel He 178 , powered by von Ohain's design, became the world's first aircraft to fly using

4489-753: Was vitally important to the development of commercial aviation in France in the 1930s. The collaboration was successful, with Penhoët merging with Wibault in 1931, forming the Chantiers Aeronautiques Wibault-Penhoët. Then in 1934 Wibault-Penhoët itself was sold to Breguet , which went on to produce several Wibault designs. In 1937 the French Air Ministry awarded Wibault a contract for a large four-engined double-deck airliner carrying up to 72 passengers. An early version, carrying 25 passengers in some luxury, including

#887112