Misplaced Pages

#497502

96-486: Bulldozers are used heavily in large and small scale construction, road building, minings and quarrying , on farms, in heavy industry factories, and in military applications in both peace and wartime. The word "bulldozer" refers only to a motorized unit fitted with a blade designed for pushing. The word is sometimes used inaccurately for other heavy equipment such as a front-end loader designed for carrying rather than pushing material. The term originally referred only to

192-643: A World Heritage property . The concept of a buffer zone was first included in the Operational Guidelines for the implementation of the World Heritage Convention in 1977. In the most current version of the Operational Guidelines of 2005 the inclusion of a buffer zone into a nomination of a site to the World Heritage List is strongly recommended but not mandatory. — World Heritage Convention The buffer zone

288-516: A laboratory or factory. Ores recovered by mining include metals , coal , oil shale , gemstones , limestone , chalk , dimension stone , rock salt , potash , gravel , and clay . The ore must be a rock or mineral that contains valuable constituent, can be extracted or mined and sold for profit. Mining in a wider sense includes extraction of any non-renewable resource such as petroleum , natural gas , or even water . Modern mining processes involve prospecting for ore bodies, analysis of

384-459: A " scraper " to increase productivity. The towed Fresno Scraper , invented in 1883 by James Porteous , was the first design to enable this to be done economically, removing the soil from an area being cut and depositing where needed as fill . Dozer blades with a reinforced center section for pushing are known as "bull blades". Dozer blades are added to combat engineering vehicles and other military equipment, such as artillery tractors such as

480-472: A brush rake for removing brush and roots. These attachments (home-built or built by small equipment manufacturers of attachments for wheeled and crawler tractors and trucks) appeared by 1929. Widespread acceptance of the bull-grader does not seem to appear before the mid-1930s. The addition of power down-force provided by hydraulic cylinders instead of just the weight of the blade made them the preferred excavation machine for large and small contractors alike by

576-421: A buffer zone can have a positive effect on soil water storage performance. In addition, plant roots make the soil stronger, withstand waves and rainstorm, mitigate the erosion of riverbanks by floods , and effectively control the erosion of the beach. Riparian buffer zones have been used in many areas to protect the habitats of many animals which are being devastated by increased human activity. The areas around

672-588: A dozer blade-equipped tank or armoured personnel carrier. Some bulldozers have been fitted with armor by civilian operators to prevent bystanders or police from interfering with the work performed by the bulldozer, as in the case of strikes or demolition of condemned buildings. This has also been done by civilians with a dispute with the authorities, such as Marvin Heemeyer , who outfitted his Komatsu D355A bulldozer with homemade composite armor to then demolish government buildings. In recent years, innovations in

768-444: A good environment for upland habitat, which is in line with the living conditions of freshwater turtles , making them more dependent on the wetland environment. The protection level of the buffer zones will affect the habitat range of amphibians and reptiles , and the environmental management of the wetland habitat around buffer zone is extremely important. Vegetation buffer zones form a variety of landscapes as an important part of

864-636: A hopper and a shaking screen or trommel which frees the desired minerals from the waste gravel. The minerals are then concentrated using sluices or jigs. Large drills are used to sink shafts, excavate stopes, and obtain samples for analysis. Trams are used to transport miners, minerals and waste. Lifts carry miners into and out of mines, and move rock and ore out, and machinery in and out, of underground mines. Huge trucks, shovels and cranes are employed in surface mining to move large quantities of overburden and ore. Processing plants use large crushers, mills, reactors, roasters and other equipment to consolidate

960-450: A hydraulically actuated blade mounted forward of the articulation joint. The bulldozer's primary tools are the blade and the ripper: Bulldozer blades come in three types: Blades can be fitted straight across the frame, or at an angle. All can be lifted, some, with additional hydraulic cylinders, can be tilted to vary the angle up to one side. Sometimes, a bulldozer is used to push or pull another piece of earth-moving equipment known as

1056-500: A manual transmission, such as the early Euclid C-6 and TC-12 or Model C Tournadozer, blade movement controlled by hydraulic cylinders or electric motors instead of early models' cable winch/brake, and automatic grade control. Hydraulic cylinders enabled the application of down force, more precise manipulation of the blade, and automated controls. In the very snowy winter of 1946–47 in the United Kingdom , in at least one case

SECTION 10

#1732793880498

1152-883: A mass of actual rock. Both types of ore deposit, placer or lode, are mined by both surface and underground methods. Some mining, including much of the rare earth elements and uranium mining , is done by less-common methods, such as in-situ leaching : this technique involves digging neither at the surface nor underground. The extraction of target minerals by this technique requires that they be soluble, e.g., potash , potassium chloride , sodium chloride , sodium sulfate , which dissolve in water. Some minerals, such as copper minerals and uranium oxide , require acid or carbonate solutions to dissolve. Explosives in Mining Explosives have been used in surface mining and sub-surface mining to blast out rock and ore intended for processing. The most common explosive used in mining

1248-426: A mining operation. Once the analysis determines a given ore body is worth recovering, development begins to create access to the ore body. The mine buildings and processing plants are built, and any necessary equipment is obtained. The operation of the mine to recover the ore begins and continues as long as the company operating the mine finds it economical to do so. Once all the ore that the mine can produce profitably

1344-503: A more sustainable future, the demand for metals is set to skyrocket. Between 2022 and 2050, an estimated 7 billion metric tons of metals will need to be extracted. Steel will account for the largest portion of this total at 5 billion tons, followed by aluminum at 950 million tons, copper at 650 million tons, graphite at 170 million tons, nickel at 100 million tons, and other metals. Notably, the energy expenditure required to extract these metals will soon surpass that of coal mining, highlighting

1440-763: A negative environmental impact, both during the mining activity and after the mine has closed. Hence, most of the world's nations have passed regulations to decrease the impact; however, the outsized role of mining in generating business for often rural, remote or economically depressed communities means that governments often fail to fully enforce such regulations. Work safety has long been a concern as well, and where enforced, modern practices have significantly improved safety in mines. Unregulated, poorly regulated or illegal mining , especially in developing economies , frequently contributes to local human rights violations and environmental conflicts . Mining can also perpetuate political instability through resource conflicts . Since

1536-442: A remote cut-off village running out of food was supplied by a bulldozer towing a big sled carrying necessary supplies. A more recent innovation is the outfitting of bulldozers with GPS technology, such as manufactured by Topcon Positioning Systems, Inc., Trimble Inc , or Leica Geosystems , for precise grade control and (potentially) "stakeless" construction. As a response to the many, and often varying claims about these systems,

1632-459: A sovereign state, forming a buffer state . Buffer zones have various purposes, politically or otherwise. They can be set up for a multitude of reasons, such as to prevent violence, protect the environment, shield residential and commercial zones from industrial accidents or natural disasters, or even isolate prisons. Buffer zones often result in large uninhabited regions that are themselves noteworthy in many increasingly developed or crowded parts of

1728-408: A strong inducement to extract these metals or to lease the deposits and collect royalties from mine operators. English, German , and Dutch capital combined to finance extraction and refining . Hundreds of German technicians and skilled workers were brought over; in 1642 a colony of 4,000 foreigners was mining and smelting copper at Keswick in the northwestern mountains. Use of water power in

1824-436: A vegetation buffer can be built to reduce the penetration of pesticides into surface water. The buffer zone also prevents heavy metals or toxins from spreading to protected areas . When riverbanks are low due to plant roots entering the interior of the riverbank vertically, the sediment of riverbank is affected by the action of said plant roots, and the ability to resist erosion is higher than that without plant roots. But when

1920-651: Is ammonium nitrate . Between 1870 and 1920, in Queensland Australia, an increase in mining accidents lead to more safety measures surrounding the use of explosives for mining. In the United States of America, between 1990 and 1999, about 22.3 billion kilograms of explosives were used in mining quarrying and other industries; Moreover " coal mining used 66.4%, nonmetal mining and quarrying 13.5%, metal mining 10.4%, construction 7.1%, and all other users 2.6%". Artisanal and small-scale mining (ASM)

2016-811: Is a blanket term for a type of subsistence mining involving a miner who may or may not be officially employed by a mining company but works independently, mining minerals using their own resources, usually by hand. While there is no completely coherent definition for ASM, artisanal mining generally includes miners who are not officially employed by a mining company and use their own resources to mine. As such, they are part of an informal economy . ASM also includes, in small-scale mining, enterprises or individuals that employ workers for mining, but who generally still use similar manually-intensive methods as artisanal miners (such as working with hand tools). In addition, ASM can be characterized as distinct from large-scale mining (LSM) by less efficient extraction of pure minerals from

SECTION 20

#1732793880498

2112-476: Is done by removing surface vegetation, dirt, and bedrock to reach buried ore deposits. Techniques of surface mining include: open-pit mining , which is the recovery of materials from an open pit in the ground; quarrying , identical to open-pit mining except that it refers to sand, stone and clay; strip mining , which consists of stripping surface layers off to reveal ore underneath; and mountaintop removal , commonly associated with coal mining, which involves taking

2208-463: Is equipped with a replaceable tungsten steel alloy tip, known as a boot. Ripping can not only loosen soil (such as podzol hardpan) in agricultural and construction applications but break shaly rock or pavement into easily handled small rubble. A variant of the ripper is the stumpbuster, a single spike protruding horizontally used to split a tree stump. Bulldozers employed for combat-engineering roles are often fitted with armor to protect

2304-617: Is getting worse due to the misuse of land. Although the buffer zone occupies a small area, it greatly improves the quality of water in the agricultural watershed due to its filtering effect on nutrients in the underground water and surface water. Because farmland is sprayed with large amounts of pesticides, some of which can seep into surface water, fish and other aquatic life can be negatively affected, which in turn can lead to environmental damage. Vegetation buffer has been proved to be an effective filter for sediment, especially for sediment-bound pesticides. When pesticides are sprayed in excess,

2400-613: Is mining upward, creating a sloping underground room, long wall mining , which is grinding a long ore surface underground, and room and pillar mining, which is removing ore from rooms while leaving pillars in place to support the roof of the room. Room and pillar mining often leads to retreat mining , in which supporting pillars are removed as miners retreat, allowing the room to cave in, thereby loosening more ore. Additional sub-surface mining methods include hard rock mining , bore hole mining, drift and fill mining, long hole slope mining, sub level caving, and block caving . Heavy machinery

2496-484: Is much more common, and produces, for example, 85% of minerals (excluding petroleum and natural gas) in the United States, including 98% of metallic ores. Targets are divided into two general categories of materials: placer deposits , consisting of valuable minerals contained within river gravels, beach sands, and other unconsolidated materials ; and lode deposits , where valuable minerals are found in veins, in layers, or in mineral grains generally distributed throughout

2592-413: Is not of immediate interest to the miner. The total movement of ore and waste constitutes the mining process. Often more waste than ore is mined during the life of a mine, depending on the nature and location of the ore body. Waste removal and placement is a major cost to the mining operator, so a detailed characterization of the waste material forms an essential part of the geological exploration program for

2688-523: Is one of the Best Management Practices (BMPs). A buffer zone is intended to avert the effect of negative environmental or human influences, whether or not it embodies natural or cultural value itself. The importance and function of a buffer zone and the necessary protective measures derived thereof is a relatively new concept in conservation science and can differ greatly for each site. The quality of surface water in many countries

2784-584: Is recovered, reclamation can begin, to make the land used by the mine suitable for future use. Technical and economic challenges notwithstanding, successful mine development must also address human factors. Working conditions are paramount to success, especially with regard to exposures to dusts, radiation, noise, explosives hazards, and vibration, as well as illumination standards. Mining today increasingly must address environmental and community impacts, including psychological and sociological dimensions. Thus, mining educator Frank T. M. White (1909–1971), broadened

2880-453: Is sometimes shortened to "dozer", and the verb "bulldozing" to "dozing", thus making a homophone with the pre-existing verb " dozing ". Mining Mining is the extraction of valuable geological materials and minerals from the surface of the Earth . Mining is required to obtain most materials that cannot be grown through agricultural processes , or feasibly created artificially in

2976-656: Is the largest producer of diamonds in Africa, with an estimated 12 million carats in 2019. Other types of mining reserves in Africa include cobalt , bauxite , iron ore , coal, and copper . Gold and coal mining started in Australia and New Zealand in the 19th century. Nickel has become important in the economy of New Caledonia . In Fiji , in 1934, the Emperor Gold Mining Company Ltd. established operations at Vatukoula , followed in 1935 by

Bulldozer - Misplaced Pages Continue

3072-423: Is to conduct a feasibility study to evaluate the financial viability, the technical and financial risks, and the robustness of the project. This is when the mining company makes the decision whether to develop the mine or to walk away from the project. This includes mine planning to evaluate the economically recoverable portion of the deposit, the metallurgy and ore recoverability, marketability and payability of

3168-419: Is used in mining to explore and develop sites, to remove and stockpile overburden, to break and remove rocks of various hardness and toughness, to process the ore, and to carry out reclamation projects after the mine is closed. Bulldozers, drills, explosives and trucks are all necessary for excavating the land. In the case of placer mining , unconsolidated gravel, or alluvium , is fed into machinery consisting of

3264-493: The Caterpillar D9 , was also used to clear mines and demolish enemy structures. Industry statistics based on 2010 production published by Off-Highway Research showed Shantui was the largest producer of bulldozers, making over 10,000 units that year or two in five crawler-type dozers made in the world. The next-largest producer by number of units is Caterpillar Inc., which produced 6,400 units. Komatsu introduced

3360-521: The Greek author Diodorus Siculus , who mentions fire-setting as one method used to break down the hard rock holding the gold . One of the complexes is shown in one of the earliest known mining maps. The miners crushed the ore and ground it to a fine powder before washing the powder for the gold dust known as the dry and wet attachment processes. Mining in Europe has a very long history. Examples include

3456-472: The Type 73 or M8 tractor , to clear battlefield obstacles and prepare firing positions. Dozer blades may be mounted on main battle tanks to clear antitank obstacles or mines, and dig improvised shelters. A ripper is a long, claw-like shank that may be mounted singly or in multiples on the rear of a bulldozer to loosen hard and impacted materials. Usually a single shank is preferred for heavy ripping. The ripper

3552-517: The argentiferous galena in the mines of Cartagena ( Cartago Nova ), Linares ( Castulo ), Plasenzuela and Azuaga , among many others. Spain was one of the most important mining regions, but all regions of the Roman Empire were exploited. In Great Britain the natives had mined minerals for millennia , but after the Roman conquest , the scale of the operations increased dramatically, as

3648-836: The greenstone of the Langdale axe industry based in the English Lake District . The oldest-known mine on archaeological record is the Ngwenya Mine in Eswatini (Swaziland) , which radiocarbon dating shows to be about 43,000 years old. At this site Paleolithic humans mined hematite to make the red pigment ochre . Mines of a similar age in Hungary are believed to be sites where Neanderthals may have mined flint for weapons and tools. Ancient Egyptians mined malachite at Maadi . At first, Egyptians used

3744-470: The protected area categories (e.g. category V or VI of IUCN Protected Area) or a classification scheme (e.g. NATURA 2000) depending on the conservation objective. The term 'buffer zone' initially gained prominence in the conservation of natural and cultural heritage through its usage in the establishment of UNESCO 's World Heritage Convention, and the term was intended to be used as follows: A buffer zone serves to provide an additional layer of protection to

3840-753: The 1940s, by which time the term "bulldozer" referred to the entire machine and not just the attachment. Over the years, bulldozers got bigger and more powerful in response to the demand for equipment suited for ever larger earthworks . Firms such as Caterpillar , Komatsu , Clark Equipment Co , Case , Euclid , Allis Chalmers , Liebherr , LiuGong , Terex , Fiat-Allis , John Deere , Massey Ferguson , BEML , XGMA, and International Harvester manufactured large, tracked-type earthmoving machines. R.G. LeTourneau and Caterpillar manufactured large, rubber-tired bulldozers. Bulldozers grew more sophisticated as time passed. Improvements include drivetrains analogous to (in automobiles) an automatic transmission instead of

3936-448: The 1940s. To dig canals , raise earthen dams , and do other earth-moving jobs, these tractors were equipped with a large, thick, metal plate in front. (The blade got its curved shape later). In some early models, the driver sat on top in the open without a cabin. The three main types of bulldozer blades are a U-blade for pushing and carrying soil relatively long distances, a straight blade for "knocking down" and spreading piles of soil, and

Bulldozer - Misplaced Pages Continue

4032-509: The 21st century begins, a globalized mining industry of large multinational corporations has arisen. Peak minerals and environmental impacts have also become a concern. Different elements, particularly rare-earth minerals , have begun to increase in demand as a result of new technologies. In 2023, 8.5 billion metric tons of coal were extracted from the Earth's crust. However, as the global economy transitions away from fossil fuels and toward

4128-680: The 7th century to the 14th century. Gold was often traded to Mediterranean economies that demanded gold and could supply salt , even though much of Africa was abundant with salt due to the mines and resources in the Sahara desert . The trading of gold for salt was mostly used to promote trade between the different economies. Since the Great Trek in the 19th century, after, gold and diamond mining in Southern Africa has had major political and economic impacts. The Democratic Republic of Congo

4224-564: The D575A in 1981, the D757A-2 in 1991, and the D575A-3 in 2002, which the company touts as the biggest bulldozer in the world. These appeared as early as 1929, but were known as "bull grader" blades, and the term "bulldozer blade" did not appear to come into widespread use until the mid-1930s. "Bulldozer" now refers to the whole machine, not just the attachment. In contemporary usage, "bulldozer"

4320-675: The French crown to operate mines in 1733, becoming "the first practical miner on Lake Superior"; seven years later, mining was halted by an outbreak between Sioux and Chippewa tribes. Mining in the United States became widespread in the 19th century, and the United States Congress passed the General Mining Act of 1872 to encourage mining of federal lands. As with the California Gold Rush in

4416-573: The Kellogg Report published in 2010 a detailed comparison of all the manufacturers' systems, evaluating more than 200 features for dozers alone. The best-known maker of bulldozers is Caterpillar. Komatsu , Liebherr , Case , Hitachi , Volvo , and John Deere are present-day competitors. Although these machines began as modified farm tractors, they became the mainstay for big civil construction projects, and found their way into use by military construction units worldwide. The best-known model,

4512-643: The Loloma Gold Mines, N.L., and then by Fiji Mines Development Ltd. (aka Dolphin Mines Ltd.). These developments ushered in a “mining boom”, with gold production rising more than a hundred-fold, from 931.4 oz in 1934 to 107,788.5 oz in 1939, an order of magnitude then comparable to the combined output of New Zealand and Australia's eastern states. During prehistoric times, early Americans mined large amounts of copper along Lake Superior 's Keweenaw Peninsula and in nearby Isle Royale ; metallic copper

4608-481: The Romans needed Britannia 's resources, especially gold , silver , tin , and lead . Roman techniques were not limited to surface mining. They followed the ore veins underground once opencast mining was no longer feasible. At Dolaucothi they stoped out the veins and drove adits through bare rock to drain the stopes. The same adits were also used to ventilate the workings, especially important when fire-setting

4704-598: The Spanish to pulverize ore after being mined. This device was powered by animals and used the same principles used for grain threshing . Much of the knowledge of medieval mining techniques comes from books such as Biringuccio 's De la pirotechnia and probably most importantly from Georg Agricola 's De re metallica (1556). These books detail many different mining methods used in German and Saxon mines. A prime issue in medieval mines, which Agricola explains in detail,

4800-756: The Umm el-Sawwan site; gypsum was used to make funerary items for private tombs. Other minerals mined in Egypt from the Old Kingdom (2649-2134 BC) until the Roman Period (30 BC-AD 395) including granite , sandstone , limestone , basalt , travertine , gneiss , galena , and amethyst . Mining in Egypt occurred in the earliest dynasties. The gold mines of Nubia were among the largest and most extensive of any in Ancient Egypt. These mines are described by

4896-624: The beginning of civilization, people have used stone , clay and, later, metals found close to the Earth's surface. These were used to make early tools and weapons; for example, high quality flint found in northern France , southern England and Poland was used to create flint tools . Flint mines have been found in chalk areas where seams of the stone were followed underground by shafts and galleries. The mines at Grimes Graves and Krzemionki are especially famous, and like most other flint mines, are Neolithic in origin (c. 4000–3000 BC). Other hard rocks mined or collected for axes included

SECTION 50

#1732793880498

4992-572: The blade attachment but is now commonly applied to any crawler tractor with a front mounted blade. Typically, bulldozers are large and powerful tracked heavy equipment . The tracks give them excellent traction and mobility through very rough terrain. Wide tracks also help distribute the vehicle's weight over a large area (decreasing ground pressure ), thus preventing it from sinking in sandy or muddy ground. Extra-wide tracks are known as swamp tracks or low ground pressure (lgp) tracks. Bulldozers have transmission systems designed to take advantage of

5088-528: The bright green malachite stones for ornamentations and pottery . Later, between 2613 and 2494 BC, large building projects required expeditions abroad to the area of Wadi Maghareh in order to secure minerals and other resources not available in Egypt itself. Quarries for turquoise and copper were also found at Wadi Hammamat , Tura , Aswan and various other Nubian sites on the Sinai Peninsula and at Timna . Quarries for gypsum were found at

5184-683: The buffer zone can form the habitat of many animals, and plants can become food for small aquatic animals . The buffer zone itself can also support the life activities of various amphibians and birds . Plants and animals can migrate or spread in response to these buffer zones, thus increasing the biodiversity in the area. A 1998 study shows that the species and number of animals and plants in riparian zones are higher than in other ecosystems. Because of their ability to provide abundant water, soft soil and stable climate, small animals such as Myotis and Martes prefer to live along riverbanks rather than in hilly areas. The buffer zone can also provide

5280-407: The buffer zone, trees up to 6 meters tall greatly enhance the aesthetic value of the landscape. These tall trees have luxuriant branches and leaves, especially their upright posture, making them of higher ornamental value. Some colorful landscape tree species can be planted on both sides of rivers with tourism and sightseeing value to improve the aesthetic value of the place. Establishing vegetation in

5376-480: The buffer zone. Some forces' engineer doctrines differentiate between a low-mobility armoured dozer (LMAD) and a high-mobility armoured dozer (HMAD). The LMAD is dependent on a flatbed to move it to its employment site, whereas the HMAD has a more robust engine and drive system designed to give it road mobility with a moderate range and speed. HMADs, however, normally lack the full cross-country mobility characteristics of

5472-412: The construction technology have made remote-controlled bulldozers a reality. Now, heavy machinery can be controlled from up to 1,000 feet away. This contributes to the safety of workers on the jobsite, keeping them at a secure distance from potentially dangerous jobs. The advancement and the ability to control the heavy machinery from afar provides workers with the sufficient control over the dozers to get

5568-417: The cutter-head is progressively launched further into the coal seam. High wall mining can produce thousands of tons of coal in contour-strip operations with narrow benches, previously mined areas, trench mine applications and steep-dip seams. Sub-surface mining consists of digging tunnels or shafts into the earth to reach buried ore deposits. Ore, for processing, and waste rock, for disposal, are brought to

5664-562: The driver from firearms and debris, enabling bulldozers to operate in combat zones. The most widely documented use is the Israeli Military militarized Caterpillar D9 , for earth moving, clearing terrain obstacles, opening routes, and detonating explosive charges. The IDF used armoured bulldozers extensively during Operation Rainbow where they were used to uproot Gaza Strip smuggling tunnels and destroy residential neighbourhoods, water wells and pipes, and agricultural land to expand

5760-532: The first designs for the bulldozer. A replica is on display at the city park in Morrowville, Kansas , where the two built the first bulldozer. On December 18, 1923, Cummings and McLeod filed U.S. patent #1,522,378 that was later issued on January 6, 1925, for an "Attachment for Tractors." By the 1920s, tracked vehicles became common, particularly the Caterpillar 60 . Rubber-tired vehicles came into use in

5856-698: The focus to the “total environment of mining”, including reference to community development around mining, and how mining is portrayed to an urban society, which depends on the industry, although seemingly unaware of this dependency. He stated, “[I]n the past, mining engineers have not been called upon to study the psychological, sociological and personal problems of their own industry – aspects that nowadays are assuming tremendous importance. The mining engineer must rapidly expand his knowledge and his influence into these newer fields.” Mining techniques can be divided into two common excavation types: surface mining and sub-surface (underground) mining . Today, surface mining

SECTION 60

#1732793880498

5952-487: The form of water mills was extensive. The water mills were employed in crushing ore, raising ore from shafts, and ventilating galleries by powering giant bellows . Black powder was first used in mining in Selmecbánya , Kingdom of Hungary (now Banská Štiavnica , Slovakia) in 1627. Black powder allowed blasting of rock and earth to loosen and reveal ore veins. Blasting was much faster than fire-setting and allowed

6048-400: The growing importance of sustainable metal extraction practices. The process of mining from discovery of an ore body through extraction of minerals and finally to returning the land to its natural state consists of several distinct steps. The first is discovery of the ore body, which is carried out through prospecting or exploration to find and then define the extent, location and value of

6144-487: The job done. Though these machines are still in their early stages, many construction companies are using them successfully. The first bulldozers were adapted from Holt farm tractors that were used to plough fields. The versatility of tractors in soft ground for logging and road building contributed to the development of the armored tank in World War I . In 1923, farmer James Cummings and draftsman J. Earl McLeod made

6240-535: The metals due to the difficulties of transporting them, but the copper was eventually traded throughout the continent along major river routes. In the early colonial history of the Americas, "native gold and silver was quickly expropriated and sent back to Spain in fleets of gold- and silver-laden galleons", the gold and silver originating mostly from mines in Central and South America. Turquoise dated at 700 AD

6336-768: The mid-19th century, mining for minerals and precious metals, along with ranching , became a driving factor in the U.S. Westward Expansion to the Pacific coast. With the exploration of the West, mining camps sprang up and "expressed a distinctive spirit, an enduring legacy to the new nation"; Gold Rushers would experience the same problems as the Land Rushers of the transient West that preceded them. Aided by railroads, many people traveled West for work opportunities in mining. Western cities such as Denver and Sacramento originated as mining towns. When new areas were explored, it

6432-497: The mid-sixteenth century. On the continent, mineral deposits belonged to the crown, and this regalian right was stoutly maintained. But in England, royal mining rights were restricted to gold and silver (of which England had virtually no deposits) by a judicial decision of 1568 and a law in 1688. England had iron , zinc , copper , lead , and tin ores. Landlords who owned the base metals and coal under their estates then had

6528-645: The military buffer zone along the Philadelphi Route . This use drew criticism against both the use and the suppliers of armoured bulldozers from human-rights organizations such as the EWASH-coalition and Human Rights Watch , the latter of whom urged Caterpillar to cease their sale of bulldozers to the IDF. The use of bulldozers was seen as necessary by Israeli authorities to uproot smuggling tunnels, destroy houses used by Palestinian gunmen, and expand

6624-432: The minehead, where the water was stored in large reservoirs and tanks. When a full tank was opened, the flood of water sluiced away the overburden to expose the bedrock underneath and any gold-bearing veins. The rock was then worked by fire-setting to heat the rock, which would be quenched with a stream of water. The resulting thermal shock cracked the rock, enabling it to be removed by further streams of water from

6720-479: The mineral-rich material and extract the desired compounds and metals from the ore. Buffer zone A buffer zone is a neutral zonal area that lies between two or more bodies of land, usually pertaining to countries . Depending on the type of buffer zone, it may serve to separate regions or conjoin them. Common types of buffer zones are demilitarized zones , border zones and certain restrictive easement zones and green belts . Such zones may be comprised by

6816-431: The mining of previously impenetrable metals and ores. In 1762, one of the world's first mining academies was established in the same town there. The widespread adoption of agricultural innovations such as the iron plowshare , as well as the growing use of metal as a building material, was also a driving force in the tremendous growth of the iron industry during this period. Inventions like the arrastra were often used by

6912-405: The ore body. This leads to a mathematical resource estimation to estimate the size and grade of the deposit. This estimation is used to conduct a pre-feasibility study to determine the theoretical economics of the ore deposit. This identifies, early on, whether further investment in estimation and engineering studies is warranted and identifies key risks and areas for further work. The next step

7008-462: The ore concentrates, engineering concerns, milling and infrastructure costs, finance and equity requirements, and an analysis of the proposed mine from the initial excavation all the way through to reclamation. The proportion of a deposit that is economically recoverable is dependent on the enrichment factor of the ore in the area. To gain access to the mineral deposit within an area it is often necessary to mine through or remove waste material which

7104-442: The ore, lower wages, decreased occupational safety, benefits, and health standards for miners, and a lack of environmental protection measures. Artisanal miners often undertake the activity of mining seasonally. For example, crops are planted in the rainy season , and mining is pursued in the dry season . However, they also frequently travel to mining areas and work year-round. There are four broad types of ASM: Surface mining

7200-570: The overhead tanks. The Roman miners used similar methods to work cassiterite deposits in Cornwall and lead ore in the Pennines . Sluicing methods were developed by the Romans in Spain in 25 AD to exploit large alluvial gold deposits, the largest site being at Las Medulas , where seven long aqueducts tapped local rivers and sluiced the deposits. The Romans also exploited the silver present in

7296-430: The profit potential of a proposed mine, extraction of the desired materials, and final reclamation or restoration of the land after the mine is closed. Mining materials are often obtained from ore bodies, lodes , veins , seams , reefs , or placer deposits . The exploitation of these deposits for raw materials is dependent on investment, labor, energy, refining, and transportation cost. Mining operations can create

7392-431: The remaining part of a coal seam previously exploited by other surface-mining techniques has too much overburden to be removed but can still be profitably exploited from the side of the artificial cliff made by previous mining. A typical cycle alternates sumping, which undercuts the seam, and shearing, which raises and lowers the cutter-head boom to cut the entire height of the coal seam. As the coal recovery cycle continues,

7488-411: The riparian zone. Combining land and water improves the aesthetic value of river basin landscapes. The riparian buffer is rich in plant resources, and the wetland, grassland, and forest ecosystems make the landscape more beautiful. In addition, some recreational facilities can be built in the buffer zone to provide better living conditions for residents or tourists and improve people's quality of life. In

7584-513: The riverbanks are higher, the roots of the plants do not penetrate deeply into the soil, and the lakeshore soil is not very strong. Herbaceous plants can play a role to some extent, but in the long term, vegetation buffer zone can effectively solve the problem of water level rise and water erosion. The adsorption capacity of a buffer zone can reduce the speed of surface runoff and increase the effective water content of soil. Through increasing soil organic matter content and improving soil structure,

7680-446: The shafts could no longer be pumped dry with the available technology. Although an increased use of banknotes , credit and copper coins during this period did decrease the value of, and dependence on, precious metals , gold and silver still remained vital to the story of medieval mining. Due to differences in the social structure of society, the increasing extraction of mineral deposits spread from central Europe to England in

7776-567: The silver mines of Laurium , which helped support the Greek city state of Athens . Although they had over 20,000 slaves working them, their technology was essentially identical to their Bronze Age predecessors. At other mines, such as on the island of Thassos , marble was quarried by the Parians after they arrived in the 7th century BC. The marble was shipped away and was later found by archaeologists to have been used in buildings including

7872-474: The surface through the tunnels and shafts. Sub-surface mining can be classified by the type of access shafts used, and the extraction method or the technique used to reach the mineral deposit. Drift mining uses horizontal access tunnels, slope mining uses diagonally sloping access shafts, and shaft mining uses vertical access shafts. Mining in hard and soft rock formations requires different techniques. Other methods include shrinkage stope mining , which

7968-602: The tomb of Amphipolis. Philip II of Macedon , the father of Alexander the Great , captured the gold mines of Mount Pangeo in 357 BC to fund his military campaigns. He also captured gold mines in Thrace for minting coinage, eventually producing 26 tons per year. However, it was the Romans who developed large-scale mining methods, especially the use of large volumes of water brought to the minehead by numerous aqueducts . The water

8064-448: The top of a mountain off to reach ore deposits at depth. Most placer deposits, because they are shallowly buried, are mined by surface methods. Finally, landfill mining involves sites where landfills are excavated and processed. Landfill mining has been thought of as a long-term solution to methane emissions and local pollution. High wall mining, which evolved from auger mining, is another form of surface mining. In high wall mining,

8160-628: The top slats. Many examples of such devices have been found in old Roman mines and some examples are now preserved in the British Museum and the National Museum of Wales . Mining as an industry underwent dramatic changes in medieval Europe . The mining industry in the early Middle Ages was mainly focused on the extraction of copper and iron . Other precious metals were also used, mainly for gilding or coinage. Initially, many metals were obtained through open-pit mining , and ore

8256-450: The track system and provide excellent tractive force . These traits allow bulldozers to excel in road building , construction , mining , forestry , land clearing , infrastructure development, and any other projects requiring highly mobile, powerful, and stable earth-moving equipment. A variant is the all-wheel-drive wheeled bulldozer, which generally has four large rubber-tired wheels, hydraulically operated articulated steering , and

8352-469: The world's gold, followed by the establishment of large mines such as the Mount Morgan Mine , which ran for nearly a hundred years, Broken Hill ore deposit (one of the largest zinc-lead ore deposits), and the iron ore mines at Iron Knob . After declines in production, another boom in mining occurred in the 1960s. In the early 21st century, Australia remains a major world mineral producer. As

8448-474: The world, which was increasingly demanding copper for electrical and household goods. Canada's mining industry grew more slowly than did the United States due to limitations in transportation, capital, and U.S. competition; Ontario was the major producer of the early 20th century with nickel, copper, and gold. Meanwhile, Australia experienced the Australian gold rushes and by the 1850s was producing 40% of

8544-434: The world. For use in nature conservation , a buffer zone is often created to enhance the protection of areas under management for their biodiversity importance. The buffer zone of a protected area may be situated around the periphery of the region or may be a connecting zone within it that links two or more protected areas, therefore increasing their dynamics and conservation productivity. A buffer zone can also be one of

8640-628: Was mined in pre-Columbian America; in the Cerillos Mining District in New Mexico , an estimate of "about 15,000 tons of rock had been removed from Mt. Chalchihuitl using stone tools before 1700." In 1727 Louis Denys (Denis) (1675–1741), sieur de La Ronde – brother of Simon-Pierre Denys de Bonaventure and the son-in-law of René Chartier – took command of Fort La Pointe at Chequamegon Bay ; where natives informed him of an island of copper. La Ronde obtained permission from

8736-576: Was primarily extracted from shallow depths, rather than through deep mine shafts. Around the 14th century , the growing use of weapons , armour , stirrups , and horseshoes greatly increased the demand for iron. Medieval knights , for example, were often laden with up to 100 pounds (45 kg) of plate or chain link armour in addition to swords , lances and other weapons. The overwhelming dependency on iron for military purposes spurred iron production and extraction processes. The silver crisis of 1465 occurred when all mines had reached depths at which

8832-406: Was still present near the surface in colonial times. Indigenous peoples used Lake Superior copper from at least 5,000 years ago; copper tools, arrowheads, and other artifacts that were part of an extensive native trade-network have been discovered. In addition, obsidian , flint , and other minerals were mined, worked, and traded. Early French explorers who encountered the sites made no use of

8928-411: Was the removal of water from mining shafts. As miners dug deeper to access new veins, flooding became a very real obstacle. The mining industry became dramatically more efficient and prosperous with the invention of mechanically- and animal-driven pumps. Iron metallurgy in Africa dates back over four thousand years. Gold became an important commodity for Africa during the trans-Saharan gold trade from

9024-403: Was used for a variety of purposes, including removing overburden and rock debris, called hydraulic mining , as well as washing comminuted , or crushed, ores and driving simple machinery. The Romans used hydraulic mining methods on a large scale to prospect for the veins of ore, especially using a now-obsolete form of mining known as hushing . They built numerous aqueducts to supply water to

9120-465: Was used. At other parts of the site, they penetrated the water table and dewatered the mines using several kinds of machines, especially reverse overshot water-wheels . These were used extensively in the copper mines at Rio Tinto in Spain, where one sequence comprised 16 such wheels arranged in pairs, and lifting water about 24 metres (79 ft). They were worked as treadmills with miners standing on

9216-539: Was usually the gold ( placer and then lode ) and then silver that were taken into possession and extracted first. Other metals would often wait for railroads or canals, as coarse gold dust and nuggets do not require smelting and are easy to identify and transport. In the early 20th century, the gold and silver rush to the western United States also stimulated mining for coal as well as base metals such as copper, lead, and iron. Areas in modern Montana, Utah, Arizona, and later Alaska became predominant suppliers of copper to

#497502