Misplaced Pages

#547452

55-607: The service was split between two companies, Detroit–Windsor Truck Ferry, Incorporated of Detroit and CMT Canadian Maritime Transport, Limited of Windsor. It accepted only trucks . The ferry was the primary crossing for hazardous materials (HAZMAT) trucks between Windsor and La Salle in Ontario, and Detroit and the Downriver communities in Michigan, although other transport trucks could have used it as an alternative to

110-406: A fifth wheel hitch. Box trucks have walls and a roof, making an enclosed load space. The rear has doors for unloading; a side door is sometimes fitted. Chassis cab trucks have a fully enclosed cab at the front, with bare chassis frame-rails behind, suitable for subsequent permanent attachment of a specialized payload, like a fire-truck or ambulance body. Concrete mixers have

165-485: A 25 mph (40 km/h) speed governor as they are classified as low-speed vehicles. These vehicles have found uses in construction, large campuses (government, university, and industrial), agriculture, cattle ranches, amusement parks, and replacements for golf carts. Major mini-truck manufacturers and their brands include: Daihatsu Hijet , Honda Acty , Tata Ace , Mazda Scrum , Mitsubishi Minicab , Subaru Sambar , and Suzuki Carry . Light trucks are car-sized (in

220-401: A common construction: they are made of a chassis , a cab , an area for placing cargo or equipment, axles , suspension and roadwheels , an engine and a drivetrain . Pneumatic , hydraulic , water , and electrical systems may also be present. Many also tow one or more trailers or semi-trailers. The "cab", or "cabin" is an enclosed space where the driver is seated. A " sleeper " is

275-711: A compartment attached to or integral with the cab where the driver can rest while not driving, sometimes seen in semi-trailer trucks. There are several cab configurations: A further step from this is the side loading forklift that can be described as a specially fabricated vehicle with the same properties as a truck of this type, in addition to the ability to pick up its own load. Most small trucks such as sport utility vehicles (SUVs), vans or pickups , and even light medium-duty trucks in North America, China, and Russia use gasoline engines (petrol engines), but many diesel engined models are now being produced. Most of

330-580: A factory to the nearest railway station. The first semi-trailer appeared in 1881, towed by a steam tractor manufactured by De Dion-Bouton . Steam-powered wagons were sold in France and the United States until the eve of World War I , and 1935 in the United Kingdom, when a change in road tax rules made them uneconomic against the new diesel lorries. In 1895, Karl Benz designed and built

385-423: A full-size version of the fardier à vapeur was built, specified to be able to carry four tons and cover two lieue (7.8 km, or 4.8 miles) in one hour, a performance it never achieved in practice. The vehicle weighed about 2.5 tonnes tare , and had two wheels at the rear and one in the front where the horses would normally have been. The front wheel supported a steam boiler and driving mechanism. The power unit

440-406: A ladder if tipped on end. The rails consist of a tall vertical section (two if boxed) and two shorter horizontal flanges. The height of the vertical section provides opposition to vertical flex when weight is applied to the top of the frame (beam resistance). Though typically flat the whole length on heavy-duty trucks, the rails may sometimes be tapered or arched for clearance around the engine or over

495-420: A manual transmission with synchromesh (synchronizers). Bigger trucks often use manual transmissions without synchronizers, saving bulk and weight, although synchromesh transmissions are used in larger trucks as well. Transmissions without synchronizers, known as "crash boxes", require double-clutching for each shift, (which can lead to repetitive motion injuries), or a technique known colloquially as "floating",

550-545: A manual transmission, while conventional automatic or automated manual transmissions would have anything from 5 to 12 gears. Almost all heavy truck transmissions are of the "range and split" (double H shift pattern) type, where range change and so‑called half gears or splits are air operated and always preselected before the main gear selection. A truck frame consists of two parallel boxed (tubular) or C‑shaped rails, or beams, held together by crossmembers . These frames are referred to as ladder frames due to their resemblance to

605-407: A method of changing gears which does not use the clutch, except for starts and stops, due to the physical effort of double-clutching, especially with non-power-assisted clutches, faster shifts, and less clutch wear. Double-clutching allows the driver to control the engine and transmission revolutions to synchronize so that a smooth shift can be made; for example, when upshifting, the accelerator pedal

SECTION 10

#1732802014548

660-510: A more uncertain origin, but probably has its roots in the rail transport industry, where the word is known to have been used in 1838 to refer to a type of truck (a goods wagon as in British usage, not a bogie as in the American), specifically a large flat wagon. It might derive from the verb lurry (to carry or drag along, or to lug) which was in use as early as 1664, but that association

715-550: A pension of 600 livres a year for his innovative work, and the experiment was judged interesting enough for the fardier to be kept at the arsenal. In 1800 it was transferred to the Conservatoire National des Arts et Métiers , where it can still be seen today. 241 years later, in 2010, a copy of the "fardier de Cugnot" was built by students from ParisTech , in conjunction with Cugnot's native commune of Void-Vacon . This replica worked perfectly, demonstrating

770-401: A roof and floor, used for transporting fresh and frozen cargo such as ice cream, food, vegetables, and prescription drugs. They are mostly equipped with double-wing rear doors, but a side door is sometimes fitted. Refuse trucks have a specialized body for collecting and, often, compacting trash collected from municipal, commercial, and industrial sites. This application has the widest use of

825-547: A rotating drum on an inclined axis, rotating in one direction to mix, and in the other to discharge the concrete down chutes. Because of the weight and power requirements of the drum body and rough construction sites, mixers have to be very heavy duty. Dual drive/Steer trucks are vehicles used to steer the rear of trailers . Dump trucks ("tippers" in the UK) transport loose material such as sand, gravel, or dirt for construction. A typical dump truck has an open-box bed, which

880-709: A six-axle truck may have a maximum weight of 44 t (97,000 lb) or more. Off-road trucks include standard, extra heavy-duty highway-legal trucks, typically outfitted with off-road features such as a front driving axle and special tires for applications such as logging and construction, and purpose-built off-road vehicles unconstrained by weight limits, such as the Liebherr T 282B mining truck. Australia has complex regulations over weight and length, including axle spacing, type of axle/axle group, rear overhang, kingpin to rear of trailer, drawbar length, ground clearance, as well as height and width laws. These limits are some of

935-411: A truck, of a trailer, from axle to hitch point, kingpin to rear of trailer, and turning radius are all regulated. In additions, there are special rules for carrying containers, and countries can set their own rules for local traffic. The United States Federal Bridge Law deals with the relation between the gross weight of the truck, the number of axles, the weight on and the spacing between the axles that

990-622: A version of their Xebra electric tricycle (licensable in the U.S. as a motorcycle). Popular in Europe and Asia, many mini-trucks are factory redesigns of light automobiles, usually with monocoque bodies. Specialized designs with substantial frames such as the Italian Piaggio shown here are based upon Japanese designs (in this case by Daihatsu ) and are popular for use in "old town" sections of European cities that often have very narrow alleyways. Regardless of name, these small trucks serve

1045-573: A wide range of uses. In Japan, they are regulated under the Kei car laws, which allow vehicle owners a break in taxes for buying a smaller and less-powerful vehicle (currently, the engine is limited to 660 cc displacement). These vehicles are used as on-road utility vehicles in Japan. These Japanese-made mini-trucks that were manufactured for on-road use are competing with off-road ATVs in the United States, and import regulations require that these mini-trucks have

1100-496: Is a motor vehicle designed to transport freight , carry specialized payloads, or perform other utilitarian work. Trucks vary greatly in size, power, and configuration, but the vast majority feature body-on-frame construction, with a cabin that is independent of the payload portion of the vehicle. Smaller varieties may be mechanically similar to some automobiles . Commercial trucks can be very large and powerful and may be configured to be mounted with specialized equipment, such as in

1155-427: Is hinged at the rear and lifts at the front, allowing the material in the bed to be unloaded ("dumped") on the ground behind the truck. Flatbed trucks have an entirely flat, level platform body. This allows for quick and easy loading but has no protection for the load. Hanging or removable sides are sometimes fitted, often in the form of a stakebody . Refrigerator trucks have insulated panels as walls and

SECTION 20

#1732802014548

1210-422: Is in neutral, it allows the engine speed to drop and synchronize engine and transmission revolutions relative to the road speed. Downshifting is performed in a similar fashion, except the engine speed is now required to increase (while the transmission is in neutral) just the right amount in order to achieve the synchronization for a smooth, non-collision gear change. "Skip changing" is also widely used; in principle,

1265-573: Is most often made as vans. Medium trucks are larger than light but smaller than heavy trucks. In the US, they are defined as weighing between 13,000 and 33,000 lb (5.9 and 15.0 t). For the UK and the EU the weight is between 3.5 and 7.5 t (7,700 and 16,500 lb). Local delivery and public service ( dump trucks , garbage trucks and fire-fighting trucks ) are normally around this size. Heavy trucks are

1320-461: Is mostly reserved for larger vehicles. In Australia and New Zealand, a pickup truck is frequently called a ute (short for "utility" vehicle), while in South Africa it is called a bakkie ( Afrikaans : "small open container"). In the United Kingdom, India, Malaysia, Singapore, Ireland, and Hong Kong lorry is used instead of truck , but only for the medium and heavy types, while truck

1375-469: Is not definitive. The expanded meaning of lorry , "self-propelled vehicle for carrying goods", has been in usage since 1911. In the United States, Canada, and the Philippines, "truck" is usually reserved for commercial vehicles larger than regular passenger cars, but includes large SUVs, pickups, and other vehicles with an open load bed. In Australia, New Zealand and South Africa, the word "truck"

1430-412: Is released and the clutch pedal is depressed while the gear lever is moved into neutral, the clutch pedal is then released and quickly pushed down again while the gear lever is moved to the next higher gear. Finally, the clutch pedal is released and the accelerator pedal pushed down to obtain the required engine speed. Although this is a relatively fast movement, perhaps a second or so while the transmission

1485-516: Is used almost exclusively to refer to pickups . Often produced as variations of golf cars , with internal combustion or battery electric drive , these are used typically for off-highway use on estates, golf courses, and parks. While not suitable for highway use some variations may be licensed as slow speed vehicles for operation on streets, generally as a body variation of a neighborhood electric vehicle . A few manufactures produce specialized chassis for this type of vehicle, while Zap Motors markets

1540-552: The European Union , vehicles with a gross combination mass of up to 3.5 t (3.4 long tons; 3.9 short tons) are defined as light commercial vehicles , and those over as large goods vehicles . Trucks and cars have a common ancestor: the steam-powered fardier Nicolas-Joseph Cugnot built in 1769. However, steam wagons were not common until the mid-19th century. The roads of the time, built for horse and carriages, limited these vehicles to very short hauls, usually from

1595-640: The U.S. Customs and Border Protection at both terminals of the ferry route. On the Windsor side of the river, the truck ferry entrance was located at 5550 Maplewood Drive, accessed from Ojibway Parkway via Sprucewood Avenue, near the Windsor Salt Mine . On the Detroit side of the river, the truck ferry entrance was at 1475 Springwells Court; that street intersects West Jefferson Avenue between South Schroeder Street and South Post Street. The dock

1650-420: The cab-over configuration in North America, to provide better maneuverability in tight situations. They are also among the most severe-duty and highest GVWR trucks on public roads. Semi-tractors ("artics" in the UK) have a fifth wheel for towing a semi-trailer instead of a body. Nicolas-Joseph Cugnot Nicolas-Joseph Cugnot (26 February 1725 – 2 October 1804) was a French inventor who built

1705-422: The diesel engine did not appear in production trucks until Benz introduced it in 1923. The diesel engine was not common in trucks in Europe until the 1930s. In the United States, Autocar introduced diesel engines for heavy applications in the mid-1930s. Demand was high enough that Autocar launched the "DC" model (diesel conventional) in 1939. However, it took much longer for diesel engines to be broadly accepted in

Detroit–Windsor Truck Ferry - Misplaced Pages Continue

1760-461: The phase-out of fossil fuel vehicles includes trucks. According to The Economist magazine "Electric lorries will probably run on hydrogen, not batteries, which are too expensive." Other researchers say that once faster chargers are available batteries will become competitive against diesel for all, except perhaps the heaviest, trucks. Small trucks use the same type of transmissions as almost all cars, having either an automatic transmission or

1815-545: The US, no more than 13,900 lb (6.3 t)) and are used by individuals and businesses alike. In the EU they may not weigh more than 3.5 t (7,700 lb) and are allowed to be driven with a driving licence for cars. Pickup trucks , called utes in Australia and New Zealand, are common in North America and some regions of Latin America, Asia, and Africa, but not so in Europe, where this size of commercial vehicle

1870-558: The US: gasoline engines were still in use on heavy trucks in the 1970s. Electrically powered trucks predate internal combustion ones and have been continuously available since the mid-19th-century. In the 1920s Autocar Trucks was the first of the major truck manufacturers to offer a range of electric trucks for sale. Electric trucks were successful for urban delivery roles and as specialized work vehicles like forklifts and pushback tugs . The higher energy density of liquid fuels soon led to

1925-403: The axles. The holes in rails are used either for mounting vehicle components and running wires and hoses or measuring and adjusting the orientation of the rails at the factory or repair shop. The frame is usually made of steel , but can be made (whole or in part) of aluminum for a lighter weight. A tow bar may be found attached at one or both ends, but heavy tractors almost always make use of

1980-627: The bridges. Hazardous materials have been banned from the Ambassador Bridge and Detroit–Windsor Tunnel . The nearest alternative crossing that allows hazardous or radioactive materials is the Bluewater Bridge , which connects Port Huron , Michigan, and Sarnia , Ontario. Similar to all the international crossings in the Detroit–Windsor area, a toll was required, as well as clearance from Canada Border Services Agency and

2035-650: The case of refuse trucks , fire trucks , concrete mixers , and suction excavators . In American English, a commercial vehicle without a trailer or other articulation is formally a "straight truck" while one designed specifically to pull a trailer is not a truck but a " tractor ". The majority of trucks currently in use are powered by diesel engines , although small- to medium-size trucks with gasoline engines exist in North America . Electrically powered trucks are more popular in China and Europe than elsewhere. In

2090-431: The decline of electric-powered trucks in favor of, first, gasoline, and then diesel and CNG-fueled engines until battery technology advanced in the 2000s when new chemistries and higher-volume production broadened the range of applicability of electric propulsion to trucks in many more roles. Today, manufacturers are electrifying all trucks ahead of national regulatory requirements, with long-range over-the-road trucks being

2145-493: The first internal combustion truck. Later that year some of Benz's trucks were modified to become busses by Netphener . A year later, in 1896, another internal combustion engine truck was built by Gottlieb Daimler , the Daimler Motor Lastwagen . Other companies, such as Peugeot , Renault and Büssing , also built their own versions. The first truck in the United States was built by Autocar in 1899 and

2200-595: The first known automobile accident . The incident is unrecorded in contemporary accounts, first appearing in 1804, thirty-three years after the alleged accident. Nevertheless, the story persists that Cugnot was arrested and convicted of dangerous driving, another first for him if true. Following the French Revolution , Cugnot's pension was withdrawn in 1789 and he went into exile in Brussels where he lived in poverty. Shortly before his death, Cugnot's pension

2255-443: The heavier trucks use four-stroke diesel engines with a turbocharger and intercooler . Huge off-highway trucks use locomotive-type engines such as a V12 Detroit Diesel two stroke engine. A large proportion of refuse trucks in the United States employ CNG (compressed natural gas) engines for their low fuel cost and reduced carbon emissions. A significant proportion of North American manufactured trucks use an engine built by

Detroit–Windsor Truck Ferry - Misplaced Pages Continue

2310-440: The highest in the world, a B-double can weigh 62.5 t (61.5 long tons; 68.9 short tons) and be 25 m (82 ft) long, and road trains used in the outback can weigh 172 t (169.3 long tons; 189.6 short tons) and be 53.5 m (176 ft) long. The European Union also has complex regulations. The number and spacing of axles, steering, single or dual tires, and suspension type all affect maximum weights. Length of

2365-407: The largest on-road trucks, Class 8 . These include vocational applications such as heavy dump trucks, concrete pump trucks, and refuse hauling, as well as ubiquitous long-haul 4x2 and 6×4 tractor units . Road damage and wear increase very rapidly with the axle weight. The number of steering axles and the suspension type also influence the amount of the road wear. In many countries with good roads

2420-521: The last remaining major independent engine manufacturer ( Cummins ) but most global OEMs such as Volvo Trucks and Daimler AG promote their own "captive" engines. In the European Union, all new truck engines must comply with Euro VI emission regulations, and Euro 7 from the late 2020s has stricter exhaust limits and also limits air pollution from brakes and tires . As of 2019 several alternative technologies are competing to displace

2475-662: The most challenging. Truck is used in American English ; the British English equivalent is lorry. The first known usage of "truck" was in 1611 when it referred to the small strong wheels on ships' cannon carriages, and comes from "Trokhos" (Greek) = "wheel". In its extended usage, it came to refer to carts for carrying heavy loads, a meaning known since 1771. Its expanded application to "motor-powered load carrier" has been in usage since 1930, shortened from "motor truck", which dates back to 1901. "Lorry" has

2530-424: The operation is the same as double-clutching, but it requires neutral be held slightly longer than a single-gear change. Common North American setups include 9, 10, 13, 15, and 18 speeds. Automatic and automated manual transmissions for heavy trucks are becoming more and more common, due to advances both in transmission and engine power. In Europe, 8, 10, 12, and 16 gears are common on larger trucks with

2585-592: The truck can have on the Interstate highway system. Each State determines the maximum permissible vehicle , combination , and axle weight on state and local roads. Uniquely, the State of Michigan has a gross vehicle weight limit of 164,000 lb (74 t), which is twice the U.S. federal limit. A measure to change the law was defeated in the Michigan Senate in 2019. Almost all trucks share

2640-405: The use of diesel engines in heavy trucks. CNG engines are widely used in the US refuse industry and in concrete mixers, among other short-range vocations, but range limitations have prevented their broader uptake in freight hauling applications. Heavy electric trucks and hydrogen-powered trucks are new to the market in 2021, but major freight haulers are interested. Although cars will be first

2695-527: The validity of the concept and the veracity of the tests carried out in 1769. The replica was exhibited at the 2010 Paris Motor Show before returning for exhibit in Void-Vacon. There are reports of a minor incident in 1771, when the second prototype vehicle is said to have accidentally knocked down a brick or stone wall, either that of a Paris garden or part of the Paris Arsenal walls, in perhaps

2750-621: The world's first full-size and working self-propelled mechanical land-vehicle, the "Fardier à vapeur" – effectively the world's first automobile . He was born in Void-Vacon , Lorraine , (now department of Meuse ), France. He trained as a military engineer . In 1765, he began experimenting with working models of steam-engine -powered vehicles for the French Army, intended for transporting cannons . French Army captain Cugnot

2805-487: Was also particularly poor, even by the standards of the day. The vehicle's fire needed to be relit, and its steam raised again, every quarter of an hour or so, which considerably reduced its overall speed and distance. After running a small number of trials, variously described as being between Paris and Vincennes and at Meudon , the project was abandoned. This ended the French Army's first experiment with mechanical vehicles. Even so, in 1772, King Louis XV granted Cugnot

SECTION 50

#1732802014548

2860-443: Was articulated to the "trailer", and was steered from there by means of a double handle arrangement. One source states that it seated four passengers and moved at a speed of 3.6 kilometres per hour (2.25 mph). The vehicle was reported to have been very unstable owing to poor weight distribution, a serious disadvantage for a vehicle intended to be able to traverse rough terrain and climb steep hills. In addition, boiler performance

2915-804: Was at the mouth of the River Rouge across from Zug Island . Customs offices were at the entrances, and clearance with Customs was required before embarking onto the truck ferry. The ferry was a flat open non-self propelled barge with a pilot house located on one end. The barge was towed by MV Stormont , a diesel harbor tow tug. The ferry made five trips from each side of the Detroit River from 7am (Detroit side) and 8am (Windsor side) to 3pm (last departure time). A one-way crossing took 20 minutes. 42°17′21.4″N 83°06′14.5″W  /  42.289278°N 83.104028°W  / 42.289278; -83.104028 Truck A truck or lorry

2970-635: Was available with 5 or 8 horsepower (4 or 6 kW) engines. Another early American truck was built by George Eldridge of Des Moines, Iowa, in 1903. It was powered by an engine with two opposed cylinders, and had a chain drive A 1903 Eldridge truck is displayed at the Iowa 80 Trucking Museum, Walcott, Iowa. Trucks of the era mostly used two-cylinder engines and had a carrying capacity of 1.5 to 2 t (3,300 to 4,400 lb). After World War I, several advances were made: electric starters , and 4, 6, and 8 cylinder engines. Although it had been invented in 1897,

3025-405: Was one of the first to successfully employ a device for converting the reciprocating motion of a steam piston into a rotary motion by means of a ratchet arrangement. A small version of his three-wheeled fardier à vapeur ("steam dray ") was made and used in 1769 (a fardier was a massively built two-wheeled horse-drawn cart for transporting very heavy equipment, such as cannon barrels) In 1770,

#547452