Misplaced Pages

#25974

70-435: The Minolta A-mount camera system was a line of photographic equipment from Minolta introduced in 1985 with the world's first integrated autofocus system in the camera body with interchangeable lenses. The system used a lens mount called A-mount , with a flange focal distance 44.50 mm, one millimeter longer, 43.5 mm, than the previous SR mount from 1958. The new mount was wider, 49.7 mm vs. 44.97 mm, than

140-760: A bellows camera called the Nifcarette , in March 1929. By 1937, the company reorganized as Chiyoda Kogaku Seikō, K.K. (Chiyoda Optics and Fine Engineering, Ltd.) and built the first Japanese-made twin-lens reflex camera , the Minoltaflex, based on the German Rolleiflex. In 1947, the Minolta-35 was introduced. It is based on the Leica rangefinder camera concept with the 39mm screw lens-mount. It uses

210-487: A "wet type" rubber grip, knobs with relief labels in orange color instead of the standard model's knobs with phosphorescent paint , and a brown leather shoulder strap. It also received four additional custom functions for a total of 25. A lighter magnesium vertical grip VC-9M was available as well. The camera came out in 1999 in limited quantities only and with 4-digit serial numbers. It was sold out in 2001 already. A small batch of Dynax 9Ti bodies with 8-digit serial numbers in

280-435: A 14-segment honeycomb-pattern metering and the support of Minolta's ADI ( A dvanced D istance I ntegration) with its "D" series lenses. Also for the professional–enthusiast was the vertical control grip (VC-7) that replicated some basic controls for vertical shooting and extending shooting time with extra batteries. There was also a film chamber lock to avoid accidental exposure of film that is still loaded. The Dynax/Maxxum/α-7

350-525: A P (panic) mode to reset all functions, nor was it possible to store favourite combinations of settings or use cards from the 700si card system. The 600si could be used with the VC-600 vertical control grip for a second set of controls and additional battery options. The 650si was effectively a 600si with the addition of date/time imprinting and a built-in panorama mask, restricting the film image to 12 mm × 36 mm. The Minolta 800si, released in 1997,

420-642: A cost the consumer was willing to pay, and was forced to offshore production, gradually redesigning successive cameras to reduce cost and maintain profit margins. Minolta purchased the patent rights to autofocus lens technology from Leica Camera in the 1970s. In 1985, Minolta introduced a new line of autofocus (AF) SLR cameras. In North America, they used the name Maxxum ; in Europe, the cameras were called Dynax ; and in Japan, they were named Alpha . They were Minolta's first line of automatic focus SLR cameras, and

490-465: A film may contain a mixture of normal and panoramic pictures. Sold as the Alpha 101si in Japan. The Minolta Dynax 500si (European name) was introduced in 1994. Budget version of Minolta Dynax 700si with built-in programs instead of program cards The Minolta 600si Classic (a.k.a. Maxxum 600si and α-507si), introduced in 1995, featured classic controls for most functions. This meant that

560-508: A line of digital point-and-shoot cameras to compete in the digital photography market. Their DiMAGE line included digital cameras and imaging software as well as film scanners. Minolta created a new category of " bridge cameras ," with the introduction of the DiMAGE 7 . Designed for use by people familiar with 35mm single-lens reflex (SLR) cameras but without the added cost or complication of interchangeable lenses or optical reflex viewfinders,

630-501: A lower cost. The advanced vertical metal shutter design of the older cameras was rejected in favor of a cheaper horizontal cloth-curtain shutter, reducing flash sync to a slow 1/60th second. Further cost savings were made internally, where some operating components were changed from metal to plastic. The first version of the X-370, the chrome version that was made in Japan, was a rugged, all-metal camera that sometimes had greater appeal than

700-441: A motor drive, removable pentaprism, and removable back. Minolta cameras appealed to amateur photographers with their lower prices and high-quality optics. From the late 1950s through the 1980s, Minolta was the first Japanese manufacturer to introduce a bayonet lens mount rather than a screw mount; and the first manufacturer to introduce multimode metering. They also introduced the first commercially successful autofocus SLR line with

770-410: A motor integrated in the camera body. It was released in 1985 together with 11 lenses, 2 flashguns and a complete lineup of accessories. The 7000 featured one AF-sensor, shutter speeds of 1/2000 to 30 seconds, flash sync speed of 1/100s, exposure compensation of +/-4EV in 0.5 exposure steps, center-weighted light metering mode and two frames per second film advance. The Maxxum 7000, when first released had

SECTION 10

#1732787468026

840-408: A plethora of dials and buttons as opposed to the "hold button while turning wheel" interface many of its other contemporaries offered. This interface was a direct evolution from the 9 and 600si Classic and later continued in other pro- and semi-pro models. This Maxxum offered the maximum shutter speed of 1/8000, a maximum frame rate of 4 frames/second, autofocus control with a 16-bit CPU coupled with

910-569: A program mode (P-mode), Shutter priority mode (S-mode), aperture priority mode (A-mode), and fully manual mode (M-mode). There is also a self-timer feature, a manual / auto focus switch for use with the series of auto focus lenses, hot shoe mount compatible with i and xi flashes, and a tripod mount. Introduced in 1999. Also known as the Dynax 303si. An entry-level, plastic-bodied camera manufactured in Malaysia. Key specifications: The Minolta 9xi

980-519: A result an upgrade was available in order to support the SSM lenses and D function. This upgrade was in the form of a complete systems board, unlike digital cameras which are usually upgradeable by software. Like all autofocusing Minolta SLR cameras it used the Minolta 'A-series' bayonet lens mounting system. The 9 was the first Minolta to use a radically different user layout, with many buttons, instead of

1050-586: A small and light silver-colored SLR camera body. Like all other autofocus Minolta cameras, it used the same lenses initially offered in the mid-1980s. Also available was a battery grip (BP-200) for extended 35 mm film shooting. The Maxxum 3 and Maxxum 4 are based on this Minolta, being less feature-rich entry-level cameras. This fifth generation (Dynax/Maxxum/α-3/4/5, 7 & 9) were the last full generation of film cameras that Minolta made with only two more film cameras (Dynax 60, Maxxum/α-70 and Dynax 30/40, Maxxum/α-50) produced before merging with Konica and leaving

1120-975: A technological dead end, as the cameras did not sell as hoped. Digital photography was entering the marketplace, and Minolta eventually discontinued all APS camera production. Minolta introduced features that became standard in all brands a few years later. Standardized features that were first introduced on Minolta models included multisensor light metering coupled to multiple AF sensors, automatic flash balance system, wireless TTL flash control, TTL-controlled full-time flash sync, and speedy front and rear wheels for shutter and aperture control. Special features introduced by Minolta are interactive LCD viewfinder display, setup memory, expansion program cards (discontinued), eye-activated startup, and infrared frame counter. In an effort to strengthen market share and acquire additional assets in film, film cameras, and optical equipment, Minolta merged with another long-time Japanese camera manufacturer, Konica Ltd., in 2003. The new corporation

1190-584: A way to add features to the camera, such as multi-spot metering, or re-program the built-in AE modes to favor faster shutter speeds or smaller apertures, such as the sports action card. While most of the cards' functions and effects could be duplicated by a technically knowledgeable photographer using the camera without the expansion cards, the card system was handy for less technically skilled users who just wanted to photograph their child's soccer/football team for example, without needing to learn about exposure settings and

1260-605: The #199011xx range and lacking the accessories surfaced in Germany between 2002 and 2006 (presumably assembled by Minolta's European Service Center in Bremen from 9Ti spare parts), dubbed the Dynax 9Ti II to distinguish it from the original 4-digit limited series of the 9Ti. In the second and third hardware revision of the 9, including all SSM/ADI upgraded units, a special procedure (requiring no tools) can be utilized to reconfigure

1330-469: The Minolta A-mount ; earlier manual-focus Minolta SR-mount lenses are incompatible with the new AF cameras. Unfortunately for Minolta, its autofocus design was found to infringe on the patents of Honeywell, a U.S. corporation. After protracted litigation, in 1991 Minolta was ordered to pay Honeywell damages, penalties, trial costs, and other expenses in a final amount of $ 127.6 million. After

1400-493: The XD-11 , the first multimode 35 mm compact SLR to include both aperture and shutter priority in a single body. It was also the first camera to employ a computerised chip, which in shutter priority mode overrode the chosen speed if necessary to give a correct exposure, thus offering the first-ever 'programmed mode'. The XD-11 was the last attempt by Minolta to enter the professional and semiprofessional 35 mm SLR market until

1470-584: The "computerized" interfaces tried earlier especially in the i and xi series. The more classic interface was first "tested" in a si series camera, the 600si Classic (which in essence was a 700si with a different interface) and garnered positive response. This interface was then refined and proved to be a major hit with consumers and reviewers alike, was largely copied over to the Konica Minolta Maxxum 7D , and also kept in later advanced amateur/professional Sony digital cameras. The vertical control grip

SECTION 20

#1732787468026

1540-554: The 35 mm camera business all together. First of two sixth generation Minolta film cameras marketed as the Dynax 40 in Europe and the Maxxum 50 in the USA. Entry level camera which took the crown as lightest and smallest AF 35 mm SLR. The last Minolta film camera, marketed as the Dynax 60 in Europe and the Maxxum 70 in the US. Essentially a Maxxum 5 with relatively minor changes (notably

1610-552: The 4-digit Maxxum i line, which included the 3000i, 5000i, 7000i , and 8000i, came the 1-digit Maxxum xi line; followed by the 3-digit si line; the 1-digit line without letters (Alpha/Dynax/Maxxum 3, 4, 5, 7, 9); and finally, the Maxxum 50 (Dynax 40) and Maxxum 70 (Dynax 60). Minolta also invested in APS ( Advanced Photo System ) film-format cameras, most notably with the Vectis line of SLR cameras beginning in 1996. APS later proved to be

1680-442: The 5000, 7000 and 9000. The system also included an extensive range of auto-focus lenses, flashes, a motor drive and other accessories. Compatible equipment was made by a number of third parties. The mount itself was both electronically communicating with the lens as well as used a mechanical arm to control aperture and a screw-type drive to control focusing. In the following years, many different cameras and accessories were added to

1750-439: The 600si had many dials and knobs rather than a menu system. The top plate of the camera included separate dials for exposure compensation, flash compensation, exposure mode and drive mode, and other functions were controlled by further knobs elsewhere. The advantage to the photographer was that almost all settings were readily identified even when the camera was not switched on - just like a classic camera. The 600si did not have

1820-403: The 7000, the 9000 had no internal motordrive and thus holds the position as the world's only autofocusing SLR with manual winding, but with the addition of the motor drive MD-90 a photographer could get up to 5 frames per second. The 9000 had a very extensive range of accessories, including several different backs, winding options and screens. The 9000 had a unique function in that, if combined with

1890-666: The Chinese α-7 Limited II model, which had 8-digit serial numbers. Also featuring a larger internal memory, there was a variant of the normal α-7 named α-7 CNM (Chinese navigation model) specifically for the Chinese market. The 5 was an easy-to-use, compact, and feature-packed film camera using core technologies from the Minolta Dynax/Maxxum/α-7. The Dynax/Maxxum/α-5 incorporated advanced autofocus (AF) technology, powerful film drive, relatively fast shutter speeds, and several creative features including 14 custom functions, into

1960-555: The DiMAGE 7 (including the DiMAGE A1 , A2 , and A200) and similar bridge cameras were not really adequate substitutes for professional SLR cameras, and initially there were many reports of slow autofocus speed and various malfunctions (this surfaced when a Sony-designed CCD chip would malfunction, rendering the camera useless. Minolta, however, issued a CCD alert and fixed faulty units free of charge; after Konica Minolta's withdrawal from

2030-439: The DiMAGE incorporated many of the features of a higher-level film camera with the simplicity of smaller compact digicams. The camera had a traditional zoom ring and focus ring on the lens barrel and was equipped with an electronic viewfinder (EVF) rather than the direct optical reflex view of an SLR. It added other features such as a histogram , and the cameras were compatible with Minolta's flashes for modern film SLRs. However,

2100-457: The ISO settings range 25-5000, the focal plane shutter speeds: 30 seconds - 1/2000. It is considered an entry-level camera because of the lack of manual, shutter, or aperture, priority capability. A version of the 300si offering an additional panoramic mode with part of the viewfinder and film opening masked off top and bottom. This can be selected by a switch while there is film in the camera, so that

2170-651: The Leica R3, which was in fact the Minolta XE-1 with a Leica lens mount, viewfinder, and spot metering system, and the Leica R4 was based on the Minolta XD-11. Additionally, five Minolta lenses were repackaged as Leica R lenses: the Minolta 24/2.8 MC Rokkor-X optics are found in the Leica 24/2.8 Elmarit-R, and similarly for the Minolta 35-70/3.5, 75-200/4.5, 70-210/4, and 16/2.8. In 1977, Minolta introduced

Minolta A-mount system - Misplaced Pages Continue

2240-399: The Maxxum 4 was the most compact 35 mm AF SLR, and the second fastest at autofocusing, while the Maxxum 5 was the fastest at autofocusing. These cameras were, however, intended for the consumer end of the market. Minolta made one last attempt to enter the amateur and professional market with the Maxxum (Dynax) 9 in 1998, followed by the Maxxum 7 in 2000, which used a full LCD readout on

2310-711: The Maxxum 9 in 1998. Elements of the XD-11 design (called the XD-7 in Europe) were utilized by Leitz for the Leica R4 camera. Minolta continued to offer 35 mm manual focus SLR cameras in its X-370, X-570, and X-700 from 1981, but slowly repositioned its cameras to appeal to a broader market. Minolta decided to abandon the high level of design and parts specifications of its earlier XD/XE line. The new amateur-level X-570, X-700, and related models offered additional program and metering features designed to appeal to newer photographers, at

2380-496: The Maxxum series. In 1972, Minolta drew up a formal cooperation agreement with Leitz . Leitz needed expertise in camera body electronics, and Minolta felt that they could learn from Leitz's optical expertise. Tangible results of this cooperation were the Leica CL/Minolta CL, an affordable rangefinder camera to supplement the Leica M range. The Leica CL was built by Minolta to Leica specifications. Other results were

2450-662: The Minolta Data Receiver DR-1000 and the Minolta Flash Meter IV, readings could be made on the flash meter and transferred wirelessly to the camera, and the camera then triggered from the flash meter. The Minolta 5000, Minolta's entry level camera and essentially a downscaled 7000, was released in 1986. It featured shutter speeds of 1/2000 to 4 seconds and BULB, center-weighted lightmetering, exposure compensation of +1EV, flashsync speed of 1/100s and fully automatic programs. This camera had

2520-464: The Minolta DiMAGE X, an ultracompact digital with a 3x folded zoom lens. With the folded approach, no moving parts of the lens are external to the camera. Instead, a 45-degree mirror bounces light to a conventional zoom lens safely tucked inside the camera body. Fast startup times are one potential benefit of this design (since nothing needs to extend), but slow focus and shutter lag times marred

2590-553: The Minolta Talker, the first point & shoot camera to incorporate a voice-chip that assisted with autofocus and flash operations. As a result of their innovations, the products that Minolta launched with The William Esty Company increased their camera sales from third, behind Canon & Nikon, to first in the U.S. marketplace. With the Maxxum line, the heavy duty metal bodies of earlier Minoltas were abandoned in favor of lighter and less expensive plastics. The Maxxum 7000 ,

2660-681: The United States. Although Minolta had launched their first digital SLR system as early as 1995, the RD-175  — a 3 sensor (3 x 0.38 megapixel ) camera based on the Maxxum 500si — was never successful, and in 1998, it was superseded by the Minolta Dimâge RD 3000 , a 3-megapixel DSLR based on the Minolta V-mount of Minolta's APS format SLR camera line, which was equally unsuccessful and short-lived. While Minolta

2730-551: The addition of a PASM dial). List of Minolta A-mount lenses: Minolta In 2003, Minolta merged with Konica to form Konica Minolta . On 19 January 2006, Konica Minolta announced that it was leaving the camera and photo business, and that it would sell a portion of its SLR camera business to Sony as part of its move to pull completely out of the business of selling cameras and photographic film. Relying heavily on imported German technology, Nichi-Doku turned out their first product,

2800-410: The advantage of this innovation. According to a press release by Konica Minolta they "Konica Minolta Photo Imaging Inc. ceased its Camera Business Operations as of 31 March 2006, and ceased the entire customer services for Konica Minolta cameras and related products as of 31 December 2010" As of January 1, 2017, Minolta digital cameras are exclusively manufactured under license by Elite Brands Inc in

2870-413: The aperture — something done neither before nor since. The 7 was the first camera to support SSM lenses. Perhaps most noteworthy and radical was a huge LCD navigation display on the rear of the camera's film door. This offered a full operational view without the need of constant referral to the operating manual. It also eased operation of the 35 custom functions to change camera settings. Also, the 7 featured

Minolta A-mount system - Misplaced Pages Continue

2940-538: The camera to behave like the 9Ti and subsequently invoke the limited model's extra functions also in the black model. The 7 is generally considered even more advanced in many respects than the Dynax/Maxxum/α-9, making it the most advanced Dynax/Maxxum/α. Amongst its many unusual features, it had an STF function which could emulate the Smooth Trans Focus effect by doing multiple exposures while varying

3010-434: The crossed x's in the name Maxxum. Exxon had a registered trademark for the crossed x's and sued Minolta, forcing Minolta to change the way the name was shown. The Minolta 9000, a camera aimed at professionals, was released later the same year, and featured shutter speeds of 1/4000 to 30 seconds, center-weighted and spot lightmetering, exposure compensation of +-4EV in 0.5 exposure steps and a flash sync speed of 1/250s. Unlike

3080-463: The earlier 5000. Essentially added a PC flash-sync terminal, ME capability, spot metering and faster shutter to the 7000i feature-set. This camera was not a direct replacement for the earlier 9000, and lacked some features such as depth-of-field preview, but offered some additional features that were not on the 7000i. This camera was available in white as well, together with matched white 35-105 lens and 5200i flash. An entry-level camera, exposure mode

3150-458: The effect they might have on how a picture "looked". These cards were the forerunners of today's "picture/creativity modes". This camera was aimed at the same market as the 7000. Built-in flash with a zoom head, programmed AE and metered manual exposure out of the box, adding the A/S expansion card provided two additional AE modes, Shutter-priority and Aperture-priority. A fairly direct replacement for

3220-409: The expense of some added weight. A vertical control grip (VC-9) mirroring the cameras basic controls was available. The camera had a maximum shutter speed capability of 1/12000 second due to carbon-fiber reinforced shutter blades, and a maximum frame rate of 5.5 frames/second. The camera just preceded the release of the SSM ( S uper S onic M otor) lenses and D distance encoded lens/flash system, and as

3290-593: The first commercially successful autofocus SLRs the world had seen. Minolta's marketing agency of record, The Manhattan-based William Esty Company branded the Minolta Maxxum, which was named by Creative Director George Morin. The round Minolta logo was developed by Art Director Herbert Clark with internationally renowned designer Saul Bass. The Minolta Freedom line of autofocus compacts were also branded at The William Esty Company, and named by Senior Copywriter Niels Peter Olsen. The Minolta Freedom line also included

3360-518: The late 1950s and 1960s, Minolta competed in the medium-format roll film camera market with the Autocord series of TLR (twin-lens reflex) cameras. In 1958, Minolta introduced its SR-2 single lens reflex (SLR) 35mm camera which was equipped with a bayonet mount and instant return mirror. In 1966 Minolta introduced the SR-T line which included TTL metering. Although well-made and widely regarded as some of

3430-430: The lens relayed aperture information to the camera body, and the motor for autofocus was contained within the camera body. An LCD showed aperture, shutter speed, and frame count, while an infrared beam counted sprocket holes when advancing the film from frame to frame (this prevents the use of infrared film). The 7000 had TTL phase-detection focusing and metering, autoexposure, and predictive autofocus. All Maxxum cameras use

3500-407: The most innovative SLR cameras of their time, Minolta cameras were not as robust as competing Nikon models. Minolta SR/SRT design used sleeve bushings instead of bearings on its focal plane spindles and had greater tolerances between working parts. This occasionally caused problems in very cold weather or with extremely high levels of use. Minolta SLRs also lacked important professional features such as

3570-405: The most popular of the new Maxxums, introduced the innovation of arrow buttons for setting aperture and shutter speed , rather than a shutter speed dial on the body and an aperture ring on the lens. That way, the only control necessary on the lens is the manual focus ring (plus the zoom ring in the case of zoom lenses). The Maxxum 7000 had two 8-bit CPUs and six integrated circuits. A circuit on

SECTION 50

#1732787468026

3640-466: The older SR-mount and due to the longer flange focal distance, old manual lenses were incompatible with the new system. Minolta bought the autofocus technology of Leica Correfot camera which was partly used on the a-mount autofocus technology. The mount is now used by Sony, who bought the SLR camera division from Konica Minolta , Konica and Minolta having merged a few years before. The Minolta A-mount system

3710-483: The photo business, Sony took over the CCD alert until the warranty repair service was terminated in 2010). Minolta later innovated in this line by being the first manufacturer to integrate a mechanical antishake system (Minolta's antishake is based inside the camera body as opposed to the camera lens, common with Canon EF and Nikon AF lenses). In January 2002, Minolta again created a new category of camera, introducing

3780-612: The range. The last film-based AF SLRs produced by Minolta were the Maxxum 50 (a.k.a. Dynax 30 and Dynax 40 ) and the Maxxum 70 (a.k.a. Dynax 60 and α-70 ). The Dynax/Maxxum/α branding was also used on two Konica Minolta digital SLRs, prior to the acquisition by Sony (7D, 5D). When Sony acquired Konica Minolta 's camera technologies in 2006 they chose the "α" brand name (already in use by Minolta in Asia) for their new " Sony α " digital SLR system. The Dynax/Maxxum/α lens mount (which

3850-520: The rear of the camera. Though well received by the photographic press, the 7 and 9 did not sell to expectations or achieve any significant breakthrough with their intended customer base, who had largely gravitated to the Canon or Nikon brands. All of these cameras were eventually discontinued in favor of the less-expensive Maxxum 50 and 70, which were sold under the Minolta name until 2006, when Konica Minolta ceased production of all film cameras. Minolta had

3920-542: The standard 35mm film in cassettes. The standard lens is the Super Rokkor 1:2.8 50mm. In 1950, Minolta developed a planetarium projector , the first-ever made in Japan, beginning the company's connection to astronomical optics. John Glenn took a Minolta Hi-Matic rangefinder 35 mm camera aboard the spacecraft Friendship 7 in 1962, and in 1968, Apollo 8 orbited the Moon with a Minolta Space Meter aboard. In

3990-405: The usual Program automatic exposure, Shutter priority automatic exposure, Aperture-priority automatic exposure and metered manual exposure modes (standard on the 7000), TTL autoflash (like the 7000) and added a newer faster and more sensitive AF system, faster film advance, new flash hot-shoe that was incompatible with the older flash system (although an adapter was available and the 7/8000i supported

4060-520: The widespread integration of features into camera bodies. The 700si's vertical control grip, the VC-700, can also fit the 800si. The Dynax/Maxxum/α-9, Minolta's last professional film body, was released in 1998 and started the 5th and final generation of their 35 mm autofocus camera line. The camera is constructed with a zinc and aluminium cast frame covered by SUS304 stainless steel panels, uncommon for cameras, and can tolerate large amounts of abuse at

4130-569: The x000-era CG-1000 "flash handle" for backwards compatibility). The 7000i supported the Maxxum lens system, and other previously introduced accessories such as the remote cords. Perhaps more innovative and unusual than any other improvement was the expansion card system. While also used in other models in the i-series, some models in the xi-series, and the 700si, the Minolta Creative Expansion Card System debuted on this model. The expansion card system provided

4200-730: The “plasticky” X-570, X-700, or later black versions of the X-370 (known as the X-7A) to photographers who place a premium on build quality. As Minolta's autofocus Maxxums were proving successful, Minolta invested fewer resources in its manual focus line as time progressed. Minolta entered the highly competitive 35mm compact camera market in the 1980s and transitioned from older rangefinder designs to "point-and-shoot" (P&S) electronic autofocus/autowind cameras. Minolta, like other major manufacturers faced with low-cost competition from elsewhere in Asia, found it difficult to build quality P&S cameras at

4270-405: Was also the first to feature a slightly lowered handgrip and shutter button, for better ergonomy in vertical shooting. This style of grip has also been featured in later Minolta and Sony models. Also a titanium version of this camera was available as the 9Ti . The 9Ti had the same features as its regular counterpart with the exception of the silver finish and lighter weight of the titanium shell,

SECTION 60

#1732787468026

4340-474: Was at first marketed as Maxxum in North America and α (Alpha) in Japan and the rest of Asia. In Europe, early Minolta A-mount cameras were initially identified by a 4 digit number followed by AF . The name Dynax was introduced later with the "i" cameras, the second generation of Minolta A-mount camera. It was originally based around a selection of three 35 mm single-lens reflex (SLR) bodies,

4410-542: Was believed that Konica Minolta and Sony would market their DSLR line to the masses (much like the joint marketing and development of Pentax and Samsung K10/GX10 DSLRs). On 19 January 2006, KM announced that all DSLR production would continue under Sony's management; DSLR camera assets were transferred to Sony during the Konica Minolta withdrawal phase until March 31, 2006, where technical support for these cameras (primarily Konica Minolta's other digital cameras)

4480-573: Was called Konica Minolta Ltd. Until Konica Minolta announced their withdrawal plan in 2006, they made Maxxum/Dynax digital and film-based cameras (retaining the different names in the different markets), improving the design while maintaining the basic concepts. The Maxxum 4 is a low-priced 35 mm SLR with an A-type bayonet mount, built-in flash, autoexposure, predictive autofocus, electronically controlled vertical-traverse focal plane shutter, and through-the-lens (TTL) phase-detection focusing and metering. In advertising literature, Minolta claimed that

4550-500: Was noted to be a good camera among many photographers and rave reviews on the Internet and magazines alike. In some markets a limited edition of the camera became available in 2001 as Dynax 7 Limited and α-7 Limited (there was no Maxxum variant of this model). It featured a larger internal film data memory, a slightly more refined finish of the exterior and golden-colored labels. Like the 9Ti it had 4-digit serial numbers, except for

4620-410: Was program AE only, with a high-speed program option, no Creative Expansion Card support. An even more basic Maxxum, this camera was basically for the point-and-shoot user that wanted a system SLR camera with interchangeable lenses and more powerful flashes, but did not want the features on, or did not want to pay for the 5000i, 7000i, 8000i cameras. An entry-level model, the plastic-bodied 2xi features

4690-417: Was retained from the old cameras) is now officially part of the "α mount system".  1st generation  |  2nd generation  |  3rd generation  |  4th generation  |  5th generation  |  6th generation  supports SSM lenses and D function (ADI) See also: Minolta A-mount system The Minolta 7000 was the first successful auto focus SLR using

4760-483: Was the flagship of the si series cameras before the 5th generation single digit series . It can be seen as a stop-gap measure to fill the "semi-pro" niche between the 1993 700si and the 2000 Dynax 7. This camera has a very high powered pop-up flash, one of the most powerful built-in flashes ever made. The 800si added a lot more features over its predecessor the 700si, at the expense of the 700si's card system, which most consumers at this time considered of little use due to

4830-406: Was the flagship of the xi series cameras. At its time, the fastest camera in the world; shortest shutter time 1/12000, 4,5 fps without an add on winder. Add on battery pack was available. This camera is known by several names and variations, it features full automatic program, and 5 preset programs. Manual control is not an option. It has a prominent visible built in flash and was released in 1995,

4900-416: Was the inventor of the modern integrated AF SLR, it took Konica Minolta a long time to enter the digital SLR market, a delay that may have proved fatal. Konica Minolta was the last of the large camera manufacturers to launch a digital SLR camera ( Maxxum/Dynax 5D and 7D) using the 35 mm AF mount. During July 2005, KM and Sony negotiated on a joint development of a new line of DSLR cameras, where it

#25974