Misplaced Pages

#817182

88-513: The name Emax can refer to one of two specific models, the Emax (which was grey), and the Emax II (which was black). The Emax is sometimes referred to as the Emax I or the Emax 1000 to avoid confusion between the two models (although E-mu Systems never referred to it this way, there is an internal control label that says EMAX 1000 inside every unit). The original Emax was released in 1986, as

176-684: A spindle that holds flat circular disks, called platters , which hold the recorded data. The platters are made from a non-magnetic material, usually aluminum alloy , glass , or ceramic . They are coated with a shallow layer of magnetic material typically 10–20 nm in depth, with an outer layer of carbon for protection. For reference, a standard piece of copy paper is 0.07–0.18 mm (70,000–180,000 nm) thick. The platters in contemporary HDDs are spun at speeds varying from 4200  rpm in energy-efficient portable devices, to 15,000 rpm for high-performance servers. The first HDDs spun at 1,200 rpm and, for many years, 3,600 rpm

264-475: A Samsung 970 EVO NVMe M.2 SSD (2018) with 1 TB of capacity has an endurance rating of 600 TBW. Recovering data from SSDs presents challenges due to the non-linear and complex nature of data storage in solid-state drives. The internal operations of SSDs vary by manufacturer, with commands (e.g. TRIM and the ATA Secure Erase) and programs like (e.g. hdparm ) being able to erase and modify

352-428: A cache (configurable as write-through or write-back ) for a conventional, magnetic hard disk drive. A similar technology is available on HighPoint 's RocketHybrid PCIe card. Solid-state hybrid drives (SSHDs) are based on the same principle, but integrate some amount of flash memory on board of a conventional drive instead of using a separate SSD. The flash layer in these drives can be accessed independently from

440-409: A live SD operating system are easily write-locked . Combined with a cloud computing environment or other writable medium, an OS booted from a write-locked SD card is reliable, persistent and impervious to permanent corruption. In 2011, Intel introduced a caching mechanism for their Z68 chipset (and mobile derivatives) called Smart Response Technology , which allows a SATA SSD to be used as

528-522: A stepper motor . Early hard disk drives wrote data at some constant bits per second, resulting in all tracks having the same amount of data per track, but modern drives (since the 1990s) use zone bit recording , increasing the write speed from inner to outer zone and thereby storing more data per track in the outer zones. In modern drives, the small size of the magnetic regions creates the danger that their magnetic state might be lost because of thermal effects ⁠ ⁠— thermally induced magnetic instability which

616-416: A "stopgap" technology between PMR and Seagate's intended successor heat-assisted magnetic recording (HAMR). SMR utilises overlapping tracks for increased data density, at the cost of design complexity and lower data access speeds (particularly write speeds and random access 4k speeds). By contrast, HGST (now part of Western Digital ) focused on developing ways to seal helium -filled drives instead of

704-464: A 20 megabyte hard drive for storing samples. The Emax SE added an additive synthesis engine that let the user create sounds from scratch. The Emax Plus added external SCSI device capability in addition to the other updates. Sample memory remained the same at 512 KB for all models. SCSI can be retrofitted to second and third revision motherboards and was standard on the final model the Plus. The Emax

792-582: A Field Generation Layer (FGL) and a Spin Injection Layer (SIL), and the FGL produces a magnetic field using spin-polarised electrons originating in the SIL, which is a form of spin torque energy. A typical HDD has two electric motors: a spindle motor that spins the disks and an actuator (motor) that positions the read/write head assembly across the spinning disks. The disk motor has an external rotor attached to

880-418: A bit cell comprising about 18 magnetic grains (11 by 1.6 grains). Since the mid-2000s, areal density progress has been challenged by a superparamagnetic trilemma involving grain size, grain magnetic strength and ability of the head to write. In order to maintain acceptable signal-to-noise, smaller grains are required; smaller grains may self-reverse ( electrothermal instability ) unless their magnetic strength

968-489: A breather port, unlike their air-filled counterparts. Other recording technologies are either under research or have been commercially implemented to increase areal density, including Seagate's heat-assisted magnetic recording (HAMR). HAMR requires a different architecture with redesigned media and read/write heads, new lasers, and new near-field optical transducers. HAMR is expected to ship commercially in late 2024, after technical issues delayed its introduction by more than

SECTION 10

#1732793225818

1056-449: A component of the IBM 305 RAMAC system. It was approximately the size of two large refrigerators and stored five million six-bit characters (3.75 megabytes ) on a stack of 52 disks (100 surfaces used). The 350 had a single arm with two read/write heads, one facing up and the other down, that moved both horizontally between a pair of adjacent platters and vertically from one pair of platters to

1144-411: A constant power supply to retain data. DRAM-based SSDs are typically used in specialized applications where performance is prioritized over cost or non-volatility. Many SSDs, such as NVDIMM devices, are equipped with backup power sources such as internal batteries or external AC/DC adapters. These power sources ensure data is transferred to a backup system (usually NAND flash or another storage medium) in

1232-471: A constant power supply. NAND flash-based SSDs store data in semiconductor cells, with the specific architecture influencing performance, endurance, and cost. There are various types of NAND flash memory, categorized by the number of bits stored in each cell: Over time, SSD controllers have improved the efficiency of NAND flash, incorporating techniques such as interleaved memory , advanced error correction, and wear leveling to optimize performance and extend

1320-807: A controller, which manages the data flow between the NAND memory and the host computer. The controller is an embedded processor that runs firmware to optimize performance, managing data, and ensuring data integrity. Some of the primary functions performed by the controller are: The overall performance of an SSD can scale with the number of parallel NAND chips and the efficiency of the controller. For example, controllers that enable parallel processing of NAND flash chips can improve bandwidth and reduce latency. Micron and Intel pioneered faster SSDs by implementing techniques such as data striping and interleaving to enhance read/write speeds. More recently, SandForce introduced controllers that incorporate data compression to reduce

1408-1087: A decade, from earlier projections as early as 2009. HAMR's planned successor, bit-patterned recording (BPR), has been removed from the roadmaps of Western Digital and Seagate. Western Digital's microwave-assisted magnetic recording (MAMR), also referred to as energy-assisted magnetic recording (EAMR), was sampled in 2020, with the first EAMR drive, the Ultrastar HC550, shipping in late 2020. Two-dimensional magnetic recording (TDMR) and "current perpendicular to plane" giant magnetoresistance (CPP/GMR) heads have appeared in research papers. Some drives have adopted dual independent actuator arms to increase read/write speeds and compete with SSDs. A 3D-actuated vacuum drive (3DHD) concept and 3D magnetic recording have been proposed. Depending upon assumptions on feasibility and timing of these technologies, Seagate forecasts that areal density will grow 20% per year during 2020–2034. The highest-capacity HDDs shipping commercially in 2024 are 32 TB. The capacity of

1496-404: A hard disk drive, as reported by an operating system to the end user, is smaller than the amount stated by the manufacturer for several reasons, e.g. the operating system using some space, use of some space for data redundancy, space use for file system structures. Confusion of decimal prefixes and binary prefixes can also lead to errors. Solid-state drive A solid-state drive ( SSD )

1584-743: A limited lifetime number of writes, and also slow down as they reach their full storage capacity. SSDs also have internal parallelism that allows them to manage multiple operations simultaneously, which enhances their performance. Unlike HDDs and similar electromechanical magnetic storage , SSDs do not have moving mechanical parts, which provides advantages such as resistance to physical shock, quieter operation, and faster access times. Their lower latency results in higher input/output rates (IOPS) than HDDs. Some SSDs are combined with traditional hard drives in hybrid configurations, such as Intel's Hystor and Apple's Fusion Drive . These drives use both flash memory and spinning magnetic disks in order to improve

1672-602: A low cost version of the Emulator II. The base model cost $ 2,995; a rack version was also available for $ 2,695. Although it was fairly similar to the Emulator II in sampling specifications, the Emax used much more reliable parts, and stored sounds on 3½" floppy disks, as opposed to the more antiquated 5¼" floppy disks that the Emulator used. Several upgrades were available for the Emax during its lifetime. The Emax HD featured

1760-864: A lower cost than pure SSDs. An SSD stores data in semiconductor cells, with its properties varying according to the number of bits stored in each cell (between 1 and 4). Single-level cells (SLC) store one bit of data per cell and provide higher performance and endurance. In contrast, multi-level cells (MLC), triple-level cells (TLC), and quad-level cells (QLC) store more data per cell but have lower performance and endurance. SSDs using 3D XPoint technology, such as Intel’s Optane, store data by changing electrical resistance instead of storing electrical charges in cells, which can provide faster speeds and longer data persistence compared to conventional flash memory. SSDs based on NAND flash slowly leak charge when not powered, while heavily-used consumer drives may start losing data typically after one to two year in storage. SSDs have

1848-422: A moving actuator arm, which read and write data to the platter surfaces. Data is accessed in a random-access manner, meaning that individual blocks of data can be stored and retrieved in any order. HDDs are a type of non-volatile storage , retaining stored data when powered off. Modern HDDs are typically in the form of a small rectangular box . Hard disk drives were introduced by IBM in 1956, and were

SECTION 20

#1732793225818

1936-475: A removable disk module, which included both the disk pack and the head assembly, leaving the actuator motor in the drive upon removal. Later "Winchester" drives abandoned the removable media concept and returned to non-removable platters. In 1974, IBM introduced the swinging arm actuator, made feasible because the Winchester recording heads function well when skewed to the recorded tracks. The simple design of

2024-538: A second set. Variants of the IBM 350 were the IBM 355 , IBM 7300 and IBM 1405 . In 1961, IBM announced, and in 1962 shipped, the IBM ;1301 disk storage unit, which superseded the IBM 350 and similar drives. The 1301 consisted of one (for Model 1) or two (for model 2) modules, each containing 25 platters, each platter about 1 ⁄ 8 -inch (3.2 mm) thick and 24 inches (610 mm) in diameter. While

2112-936: A small amount of volatile DRAM as a cache, similar to the buffers in hard disk drives. This cache can temporarily hold data while it is being written to the flash memory, and it also stores metadata such as the mapping of logical blocks to physical locations on the SSD. Some SSD controllers, like those from SandForce, achieve high performance without using an external DRAM cache. These designs rely on other mechanisms, such as on-chip SRAM, to manage data and minimize power consumption. Additionally, some SSDs use an SLC cache mechanism to temporarily store data in single-level cell (SLC) mode, even on multi-level cell (MLC) or triple-level cell (TLC) SSDs. This improves write performance by allowing data to be written to faster SLC storage before being moved to slower, higher-capacity MLC or TLC storage. On NVMe SSDs, Host Memory Buffer (HMB) technology allows

2200-601: A sudden power loss. Some consumer SSDs have built-in capacitors to save critical data such as the Flash Translation Layer (FTL) mapping table. Examples include the Crucial M500 and Intel 320 series. Enterprise-class SSDs, such as the Intel DC S3700 series, often come with more robust power-loss protection mechanisms like supercapacitors or batteries. The host interface of an SSD refers to

2288-616: A swing arm drive, the IBM 0680 (Piccolo), with eight inch platters, exploring the possibility that smaller platters might offer advantages. Other eight inch drives followed, then 5 + 1 ⁄ 4  in (130 mm) drives, sized to replace the contemporary floppy disk drives . The latter were primarily intended for the then fledgling personal computer (PC) market. Over time, as recording densities were greatly increased, further reductions in disk diameter to 3.5" and 2.5" were found to be optimum. Powerful rare earth magnet materials became affordable during this period, and were complementary to

2376-735: A system in the same way as HDDs, SSDs are used in a variety of devices, including personal computers , enterprise servers , and mobile devices . However, SSDs are generally more expensive on a per-gigabyte basis and have a finite number of write cycles, which can lead to data loss over time. Despite these limitations, SSDs are increasingly replacing HDDs, especially in performance-critical applications and as primary storage in many consumer devices. SSDs come in various form factors and interface types, including SATA , PCIe , and NVMe , each offering different levels of performance. Hybrid storage solutions, such as solid-state hybrid drives (SSHDs), combine SSD and HDD technologies to offer improved performance at

2464-423: A thin film of ferromagnetic material on both sides of a disk. Sequential changes in the direction of magnetization represent binary data bits . The data is read from the disk by detecting the transitions in magnetization. User data is encoded using an encoding scheme, such as run-length limited encoding, which determines how the data is represented by the magnetic transitions. A typical HDD design consists of

2552-499: A tiny fraction of the detected errors end up as not correctable. Examples of specified uncorrected bit read error rates include: Within a given manufacturers model the uncorrected bit error rate is typically the same regardless of capacity of the drive. The worst type of errors are silent data corruptions which are errors undetected by the disk firmware or the host operating system; some of these errors may be caused by hard disk drive malfunctions while others originate elsewhere in

2640-906: Is a type of solid-state storage device that uses integrated circuits to store data persistently . It is sometimes called semiconductor storage device , solid-state device , or solid-state disk . SSDs rely on non-volatile memory, typically NAND flash , to store data in memory cells. The performance and endurance of SSDs vary depending on the number of bits stored per cell, ranging from high-performing single-level cells (SLC) to more affordable but slower quad-level cells (QLC). In addition to flash-based SSDs, other technologies such as 3D XPoint offer faster speeds and higher endurance through different data storage mechanisms. Unlike traditional hard disk drives (HDDs), SSDs have no moving parts, allowing them to deliver faster data access speeds, reduced latency, increased resistance to physical shock, lower power consumption, and silent operation. Often interfaced to

2728-446: Is capable of scheduling reads and writes efficiently on the platter surfaces and remapping sectors of the media that have failed. Modern drives make extensive use of error correction codes (ECCs), particularly Reed–Solomon error correction . These techniques store extra bits, determined by mathematical formulas, for each block of data; the extra bits allow many errors to be corrected invisibly. The extra bits themselves take up space on

E-mu Emax - Misplaced Pages Continue

2816-590: Is commonly known as the " superparamagnetic limit ". To counter this, the platters are coated with two parallel magnetic layers, separated by a three-atom layer of the non-magnetic element ruthenium , and the two layers are magnetized in opposite orientation, thus reinforcing each other. Another technology used to overcome thermal effects to allow greater recording densities is perpendicular recording (PMR), first shipped in 2005, and as of 2007 , used in certain HDDs. Perpendicular recording may be accompanied by changes in

2904-669: Is improving faster than HDDs. NAND has a higher price elasticity of demand than HDDs, and this drives market growth. During the late 2000s and 2010s, the product life cycle of HDDs entered a mature phase, and slowing sales may indicate the onset of the declining phase. The 2011 Thailand floods damaged the manufacturing plants and impacted hard disk drive cost adversely between 2011 and 2013. In 2019, Western Digital closed its last Malaysian HDD factory due to decreasing demand, to focus on SSD production. All three remaining HDD manufacturers have had decreasing demand for their HDDs since 2014. A modern HDD records data by magnetizing

2992-418: Is increased, but known write head materials are unable to generate a strong enough magnetic field sufficient to write the medium in the increasingly smaller space taken by grains. Magnetic storage technologies are being developed to address this trilemma, and compete with flash memory –based solid-state drives (SSDs). In 2013, Seagate introduced shingled magnetic recording (SMR), intended as something of

3080-496: Is infrequently changed (cold data) from heavily used blocks, so that data that changes more frequently (hot data) can be written to those blocks. This helps distribute wear more evenly across the entire SSD. However, this process introduces additional writes, known as write amplification, which must be managed to balance performance and durability. Most SSDs use non-volatile NAND flash memory for data storage, primarily due to its cost-effectiveness and ability to retain data without

3168-460: Is shaped rather like an arrowhead and is made of doubly coated copper magnet wire . The inner layer is insulation, and the outer is thermoplastic, which bonds the coil together after it is wound on a form, making it self-supporting. The portions of the coil along the two sides of the arrowhead (which point to the center of the actuator bearing) then interact with the magnetic field of the fixed magnet. Current flowing radially outward along one side of

3256-588: Is specified in unit prefixes corresponding to powers of 1000: a 1- terabyte (TB) drive has a capacity of 1,000 gigabytes , where 1 gigabyte = 1 000 megabytes = 1 000 000 kilobytes (1 million) = 1 000 000 000 bytes (1 billion). Typically, some of an HDD's capacity is unavailable to the user because it is used by the file system and the computer operating system , and possibly inbuilt redundancy for error correction and recovery. There can be confusion regarding storage capacity, since capacities are stated in decimal gigabytes (powers of 1000) by HDD manufacturers, whereas

3344-645: The Apple Macintosh . Many Macintosh computers made between 1986 and 1998 featured a SCSI port on the back, making external expansion simple. Older compact Macintosh computers did not have user-accessible hard drive bays (indeed, the Macintosh 128K , Macintosh 512K , and Macintosh Plus did not feature a hard drive bay at all), so on those models, external SCSI disks were the only reasonable option for expanding upon any internal storage. HDD improvements have been driven by increasing areal density , listed in

3432-572: The Shannon limit and thus provide the highest storage density available. Typical hard disk drives attempt to "remap" the data in a physical sector that is failing to a spare physical sector provided by the drive's "spare sector pool" (also called "reserve pool"), while relying on the ECC to recover stored data while the number of errors in a bad sector is still low enough. The S.M.A.R.T ( Self-Monitoring, Analysis and Reporting Technology ) feature counts

3520-466: The magnetic storage by the host using ATA-8 commands, allowing the operating system to manage it. For example, Microsoft's ReadyDrive technology explicitly stores portions of the hibernation file in the cache of these drives when the system hibernates, making the subsequent resume faster. Dual-drive hybrid systems are combining the usage of separate SSD and HDD devices installed in the same computer, with overall performance optimization managed by

3608-463: The Emax II found a niche among many professionals due to its large and varied sample library, and it enjoyed the longest production run of any E-mu product. The EMAX II has different versions, labeled between 2201 and 2214, including mono and stereo versions. The Emax II Turbo, released in 1990, added more built-in sample memory (8 Mb from factory) and an internal SCSI Hard Disk. In 1995, the Emax II

E-mu Emax - Misplaced Pages Continue

3696-526: The HDD, but allow higher recording densities to be employed without causing uncorrectable errors, resulting in much larger storage capacity. For example, a typical 1  TB hard disk with 512-byte sectors provides additional capacity of about 93  GB for the ECC data. In the newest drives, as of 2009 , low-density parity-check codes (LDPC) were supplanting Reed–Solomon; LDPC codes enable performance close to

3784-481: The IBM GV (Gulliver) drive, invented at IBM's UK Hursley Labs, became IBM's most licensed electro-mechanical invention of all time, the actuator and filtration system being adopted in the 1980s eventually for all HDDs, and still universal nearly 40 years and 10 billion arms later. Like the first removable pack drive, the first "Winchester" drives used platters 14 inches (360 mm) in diameter. In 1978, IBM introduced

3872-508: The SSD to use a portion of the system’s DRAM instead of relying on a built-in DRAM cache, reducing costs while maintaining a high level of performance. In certain high-end consumer and enterprise SSDs, larger amounts of DRAM are included to cache both file table mappings and written data, reducing write amplification and enhances overall performance. Higher-performing SSDs may include a capacitor or battery, which helps preserve data integrity in

3960-450: The amount of data written to the flash memory, potentially increasing both performance and endurance. Wear leveling is a technique used in SSDs to ensure that write and erase operations are distributed evenly across all blocks of the flash memory. Without this, specific blocks could wear out prematurely due to repeated use, reducing the overall lifespan of the SSD. The process moves data that

4048-443: The arrowhead and radially inward on the other produces the tangential force . If the magnetic field were uniform, each side would generate opposing forces that would cancel each other out. Therefore, the surface of the magnet is half north pole and half south pole, with the radial dividing line in the middle, causing the two sides of the coil to see opposite magnetic fields and produce forces that add instead of canceling. Currents along

4136-418: The bits of a deleted file. The JEDEC Solid State Technology Association (JEDEC) has established standards for SSD reliability metrics, which include: In a distributed computing environment, SSDs can be used as a distributed cache layer that temporarily absorbs the large volume of user requests to slower HDD-based backend storage systems. This layer provides much higher bandwidth and lower latency than

4224-450: The case of embedded servo, otherwise known as sector servo technology). The servo feedback optimizes the signal-to-noise ratio of the GMR sensors by adjusting the voice coil motor to rotate the arm. A more modern servo system also employs milli and/or micro actuators to more accurately position the read/write heads. The spinning of the disks uses fluid-bearing spindle motors. Modern disk firmware

4312-426: The complete loss of the drive. Most of the advantages of solid-state drives over traditional hard drives are due to their ability to access data completely electronically instead of electromechanically, resulting in superior transfer speeds and mechanical ruggedness. On the other hand, hard disk drives offer significantly higher capacity for their price. In traditional HDDs, a rewritten file will generally occupy

4400-691: The computer like hard drives. In contrast, memory cards (such as Secure Digital (SD), CompactFlash (CF), and many others) were originally designed for digital cameras and later found their way into cell phones, gaming devices, GPS units, etc. Most memory cards are physically smaller than SSDs, and designed to be inserted and removed repeatedly. SSDs have different failure modes from traditional magnetic hard drives. Because solid-state drives contain no moving parts, they are generally not subject to mechanical failures. However, other types of failures can occur. For example, incomplete or failed writes due to sudden power loss may be more problematic than with HDDs, and

4488-593: The computer user, or by the computer's operating system software. Examples of this type of system are bcache and dm-cache on Linux , and Apple's Fusion Drive . The primary components of an SSD are the controller and the memory used to store data. Traditionally, early SSDs used volatile DRAM for storage, but since 2009, most SSDs utilize non-volatile NAND flash memory, which retains data even when powered off. Flash memory SSDs store data in metal–oxide–semiconductor (MOS) integrated circuit chips, using non-volatile floating-gate memory cells. Every SSD includes

SECTION 50

#1732793225818

4576-441: The connection between the drive and the host. The rate of areal density advancement was similar to Moore's law (doubling every two years) through 2010: 60% per year during 1988–1996, 100% during 1996–2003 and 30% during 2003–2010. Speaking in 1997, Gordon Moore called the increase "flabbergasting", while observing later that growth cannot continue forever. Price improvement decelerated to −12% per year during 2010–2017, as

4664-449: The disks; the stator windings are fixed in place. Opposite the actuator at the end of the head support arm is the read-write head; thin printed-circuit cables connect the read-write heads to amplifier electronics mounted at the pivot of the actuator. The head support arm is very light, but also stiff; in modern drives, acceleration at the head reaches 550 g . The actuator is a permanent magnet and moving coil motor that swings

4752-522: The dominant secondary storage device for general-purpose computers beginning in the early 1960s. HDDs maintained this position into the modern era of servers and personal computers , though personal computing devices produced in large volume, like mobile phones and tablets , rely on flash memory storage devices. More than 224 companies have produced HDDs historically , though after extensive industry consolidation, most units are manufactured by Seagate , Toshiba , and Western Digital . HDDs dominate

4840-467: The earlier IBM disk drives used only two read/write heads per arm, the 1301 used an array of 48 heads (comb), each array moving horizontally as a single unit, one head per surface used. Cylinder-mode read/write operations were supported, and the heads flew about 250 micro-inches (about 6 μm) above the platter surface. Motion of the head array depended upon a binary adder system of hydraulic actuators which assured repeatable positioning. The 1301 cabinet

4928-509: The electrical resistance of materials in its cells, offering much faster access times than NAND flash. 3D XPoint-based SSDs, such as Intel’s Optane drives, provide lower latency and higher endurance than NAND-based drives, although they are more expensive per gigabyte. Drives known as hybrid drives or solid-state hybrid drives (SSHDs) use a hybrid of spinning disks and flash memory. Some SSDs use magnetoresistive random-access memory (MRAM) for storing data. Many flash-based SSDs include

5016-535: The event of an unexpected power loss. The capacitor or battery provides enough power to allow the data in the cache to be written to the non-volatile memory, ensuring no data is lost. In some SSDs that use multi-level cell (MLC) flash memory, a potential issue known as "lower page corruption" can occur if power is lost while programming an upper page. This can result in previously written data becoming corrupted. To address this, some high-end SSDs incorporate supercapacitors to ensure all data can be safely written during

5104-493: The event of power loss, preventing data corruption or loss. Similarly, ULLtraDIMM devices use components designed for DIMM modules, but only use flash memory, similar to a DRAM SSD. DRAM-based SSDs are often used for tasks where data must be accessed at high speeds with low latency, such as in high-performance computing or certain server environments. 3D XPoint is a type of non-volatile memory technology developed by Intel and Micron, announced in 2015. It operates by changing

5192-467: The failure of a single chip may result in the loss of all data stored on it. Nonetheless, studies indicate that SSDs are generally reliable, often exceed their manufacturer-stated lifespan and having lower failure rates than HDDs. However, studies also note that SSDs experience higher rates of uncorrectable errors, which can lead to data loss, compared to HDDs. The endurance of an SSD is typically listed on its datasheet in one of two forms: For example,

5280-443: The growth of areal density slowed. The rate of advancement for areal density slowed to 10% per year during 2010–2016, and there was difficulty in migrating from perpendicular recording to newer technologies. As bit cell size decreases, more data can be put onto a single drive platter. In 2013, a production desktop 3 TB HDD (with four platters) would have had an areal density of about 500 Gbit/in which would have amounted to

5368-416: The heads to the desired position. A metal plate supports a squat neodymium–iron–boron (NIB) high-flux magnet . Beneath this plate is the moving coil, often referred to as the voice coil by analogy to the coil in loudspeakers , which is attached to the actuator hub, and beneath that is a second NIB magnet, mounted on the bottom plate of the motor (some drives have only one magnet). The voice coil itself

SECTION 60

#1732793225818

5456-427: The largest hard drive had a capacity of 15 TB, while the largest capacity SSD had a capacity of 100 TB. As of 2018 , HDDs were forecast to reach 100 TB capacities around 2025, but as of 2019 , the expected pace of improvement was pared back to 50 TB by 2026. Smaller form factors, 1.8-inches and below, were discontinued around 2010. The cost of solid-state storage (NAND), represented by Moore's law ,

5544-485: The lifespan of the drive. Lower-end SSDs often use QLC or TLC memory, while higher-end drives for enterprise or performance-critical applications may use MLC or SLC. In addition to the flat (planar) NAND structure, many SSDs now use 3D NAND (or V-NAND), where memory cells are stacked vertically, increasing storage density while improving performance and reducing costs. Some SSDs use volatile DRAM instead of NAND flash, offering very high-speed data access but requiring

5632-444: The magnetization of the material passing immediately under it. In modern drives, there is one head for each magnetic platter surface on the spindle, mounted on a common arm. An actuator arm (or access arm) moves the heads on an arc (roughly radially) across the platters as they spin, allowing each head to access almost the entire surface of the platter as it spins. The arm is moved using a voice coil actuator or, in some older designs,

5720-422: The manufacturing of the read/write heads to increase the strength of the magnetic field created by the heads. In 2004, a higher-density recording media was introduced, consisting of coupled soft and hard magnetic layers. So-called exchange spring media magnetic storage technology, also known as exchange coupled composite media , allows good writability due to the write-assist nature of the soft layer. However,

5808-420: The most commonly used operating systems report capacities in powers of 1024, which results in a smaller number than advertised. Performance is specified as the time required to move the heads to a track or cylinder (average access time), the time it takes for the desired sector to move under the head (average latency , which is a function of the physical rotational speed in revolutions per minute ), and finally,

5896-559: The norm in most computer installations and reached capacities of 300 megabytes by the early 1980s. Non-removable HDDs were called "fixed disk" drives. In 1963, IBM introduced the 1302, with twice the track capacity and twice as many tracks per cylinder as the 1301. The 1302 had one (for Model 1) or two (for Model 2) modules, each containing a separate comb for the first 250 tracks and the last 250 tracks. Some high-performance HDDs were manufactured with one head per track, e.g. , Burroughs B-475 in 1964, IBM 2305 in 1970, so that no time

5984-741: The performance characteristics such as rotational latency and seek time . As SSDs do not need to spin or seek to locate data, they are vastly superior to HDDs in such tests. However, SSDs have challenges with mixed reads and writes, and their performance may degrade over time. Therefore, SSD testing typically looks at when the full drive is first used, as the new and empty drive may have much better write performance than it would show after only weeks of use. The reliability of both HDDs and SSDs varies greatly among models. Some field failure rates indicate that SSDs are significantly more reliable than HDDs. However, SSDs are sensitive to sudden power interruption, sometimes resulting in aborted writes or even cases of

6072-554: The performance of frequently-accessed data. Traditional interfaces (e.g. SATA and SAS ) and standard HDD form factors allow such SSDs to be used as drop-in replacements for HDDs in computers and other devices. Newer form factors such as mSATA , M.2 , U.2 , NF1 / M.3 / NGSFF , XFM Express ( Crossover Flash Memory , form factor XT2) and EDSFF and higher speed interfaces such as NVM Express (NVMe) over PCI Express (PCIe) can further increase performance over HDD performance. Traditional HDD benchmarks tend to focus on

6160-534: The platters, increasing areal density. Normally hard drive recording heads have a pole called a main pole that is used for writing to the platters, and adjacent to this pole is an air gap and a shield. The write coil of the head surrounds the pole. The STO device is placed in the air gap between the pole and the shield to increase the strength of the magnetic field created by the pole; FC-MAMR technically doesn't use microwaves, but uses technology employed in MAMR. The STO has

6248-416: The revenue of hard disk drives as of 2017 . Though SSDs have four to nine times higher cost per bit, they are replacing HDDs in applications where speed, power consumption, small size, high capacity and durability are important. As of 2019 , the cost per bit of SSDs is falling, and the price premium over HDDs has narrowed. The primary characteristics of an HDD are its capacity and performance . Capacity

6336-543: The same location on the disk surface as the original file, whereas in SSDs the new copy will often be written to different NAND cells for the purpose of wear leveling . The wear-leveling algorithms are complex and difficult to test exhaustively. As a result, one major cause of data loss in SSDs is firmware bugs. While both memory cards and most SSDs use flash memory, they have very different characteristics, including power consumption, performance, size, and reliability. Originally, solid state drives were shaped and mounted in

6424-427: The speed at which the data is transmitted (data rate). The two most common form factors for modern HDDs are 3.5-inch, for desktop computers, and 2.5-inch, primarily for laptops. HDDs are connected to systems by standard interface cables such as SATA (Serial ATA), USB , SAS ( Serial Attached SCSI ), or PATA (Parallel ATA) cables. The first production IBM hard disk drive, the 350 disk storage , shipped in 1957 as

6512-438: The stack of disk platters when the drive was powered down. Instead, the heads were allowed to "land" on a special area of the disk surface upon spin-down, "taking off" again when the disk was later powered on. This greatly reduced the cost of the head actuator mechanism, but precluded removing just the disks from the drive as was done with the disk packs of the day. Instead, the first models of "Winchester technology" drives featured

6600-638: The storage system would, and can be managed in a number of forms, such as a distributed key-value database and a distributed file system . On supercomputers, this layer is typically referred to as burst buffer . Flash-based solid-state drives can be used to create network appliances from general-purpose personal computer hardware. A write protected flash drive containing the operating system and application software can substitute for larger, less reliable disk drives or CD-ROMs. Appliances built this way can provide an inexpensive alternative to expensive router and firewall hardware. SSDs based on an SD card with

6688-450: The swing arm actuator design to make possible the compact form factors of modern HDDs. As the 1980s began, HDDs were a rare and very expensive additional feature in PCs, but by the late 1980s, their cost had been reduced to the point where they were standard on all but the cheapest computers. Most HDDs in the early 1980s were sold to PC end users as an external, add-on subsystem. The subsystem

6776-439: The table above. Applications expanded through the 2000s, from the mainframe computers of the late 1950s to most mass storage applications including computers and consumer applications such as storage of entertainment content. In the 2000s and 2010s, NAND began supplanting HDDs in applications requiring portability or high performance. NAND performance is improving faster than HDDs, and applications for HDDs are eroding. In 2018,

6864-400: The thermal stability is determined only by the hardest layer and not influenced by the soft layer. Flux control MAMR (FC-MAMR) allows a hard drive to have increased recording capacity without the need for new hard disk drive platter materials. MAMR hard drives have a microwave generating spin torque generator (STO) on the read/write heads which allows physically smaller bits to be recorded to

6952-475: The top and bottom of the coil produce radial forces that do not rotate the head. The HDD's electronics controls the movement of the actuator and the rotation of the disk and transfers data to/from a disk controller . Feedback of the drive electronics is accomplished by means of special segments of the disk dedicated to servo feedback. These are either complete concentric circles (in the case of dedicated servo technology) or segments interspersed with real data (in

7040-491: The total number of errors in the entire HDD fixed by ECC (although not on all hard drives as the related S.M.A.R.T attributes "Hardware ECC Recovered" and "Soft ECC Correction" are not consistently supported), and the total number of performed sector remappings, as the occurrence of many such errors may predict an HDD failure . The "No-ID Format", developed by IBM in the mid-1990s, contains information about which sectors are bad and where remapped sectors have been located. Only

7128-433: The usual filtered air. Since turbulence and friction are reduced, higher areal densities can be achieved due to using a smaller track width, and the energy dissipated due to friction is lower as well, resulting in a lower power draw. Furthermore, more platters can be fit into the same enclosure space, although helium gas is notoriously difficult to prevent escaping. Thus, helium drives are completely sealed and do not have

7216-499: The volume of storage produced ( exabytes per year) for servers. Though production is growing slowly (by exabytes shipped ), sales revenues and unit shipments are declining, because solid-state drives (SSDs) have higher data-transfer rates, higher areal storage density, somewhat better reliability, and much lower latency and access times. The revenues for SSDs, most of which use NAND flash memory , slightly exceeded those for HDDs in 2018. Flash storage products had more than twice

7304-520: Was about the size of three large refrigerators placed side by side, storing the equivalent of about 21 million eight-bit bytes per module. Access time was about a quarter of a second. Also in 1962, IBM introduced the model 1311 disk drive, which was about the size of a washing machine and stored two million characters on a removable disk pack . Users could buy additional packs and interchange them as needed, much like reels of magnetic tape . Later models of removable pack drives, from IBM and others, became

7392-454: Was discontinued in 1989 and replaced by Emax-II The Emax was replaced in 1989 by the Emax II and Emax II Turbo . Although the Emax II was a true 16-bit sampler with more polyphony , it also used digital filters and components, which sounded noticeably different from the original's analogue filter chips. The Emax II also sported a higher pricetag; a base model cost $ 3,595, while a fully expanded model could cost as much as $ 8,000. Nevertheless,

7480-573: Was discontinued, replaced by the rackmountable ESi-32 , and later the ESI-4000 and the ESI-2000 . Hard drive A hard disk drive ( HDD ), hard disk , hard drive , or fixed disk is an electro-mechanical data storage device that stores and retrieves digital data using magnetic storage with one or more rigid rapidly rotating platters coated with magnetic material. The platters are paired with magnetic heads , usually arranged on

7568-427: Was lost physically moving the heads to a track and the only latency was the time for the desired block of data to rotate into position under the head. Known as fixed-head or head-per-track disk drives, they were very expensive and are no longer in production. In 1973, IBM introduced a new type of HDD code-named " Winchester ". Its primary distinguishing feature was that the disk heads were not withdrawn completely from

7656-513: Was not sold under the drive manufacturer's name but under the subsystem manufacturer's name such as Corvus Systems and Tallgrass Technologies , or under the PC system manufacturer's name such as the Apple ProFile . The IBM PC/XT in 1983 included an internal 10 MB HDD, and soon thereafter, internal HDDs proliferated on personal computers. External HDDs remained popular for much longer on

7744-408: Was the norm. As of November 2019 , the platters in most consumer-grade HDDs spin at 5,400 or 7,200 rpm. Information is written to and read from a platter as it rotates past devices called read-and-write heads that are positioned to operate very close to the magnetic surface, with their flying height often in the range of tens of nanometers. The read-and-write head is used to detect and modify

#817182