48-662: The ohm (symbol: Ω , the uppercase Greek letter omega ) is the unit of electrical resistance in the International System of Units (SI) . It is named after German physicist Georg Ohm . Various empirically derived standard units for electrical resistance were developed in connection with early telegraphy practice, and the British Association for the Advancement of Science proposed a unit derived from existing units of mass, length and time, and of
96-558: A light bulb with a power rating of 100 W is turned on for one hour, the energy used is 100 watt hours (W·h), 0.1 kilowatt hour, or 360 kJ . This same amount of energy would light a 40-watt bulb for 2.5 hours, or a 50-watt bulb for 2 hours. Power stations are rated using units of power, typically megawatts or gigawatts (for example, the Three Gorges Dam in China is rated at approximately 22 gigawatts). This reflects
144-492: A constant opposing force of one newton , the rate at which work is done is one watt. 1 W = 1 J / s = 1 N ⋅ m / s = 1 k g ⋅ m 2 ⋅ s − 3 . {\displaystyle \mathrm {1~W=1~J{/}s=1~N{\cdot }m{/}s=1~kg{\cdot }m^{2}{\cdot }s^{-3}} .} In terms of electromagnetism , one watt
192-488: A convenient scale for practical work as early as 1861. Following the 2019 revision of the SI , in which the ampere and the kilogram were redefined in terms of fundamental constants, the ohm is now also defined as an exact value in terms of these constants. The ohm is defined as an electrical resistance between two points of a conductor when a constant potential difference of one volt (V), applied to these points, produces in
240-489: A few Aegean islands, namely Paros , Thasos and Melos , chose the exact opposite innovation, using a broken-up circle for the short and a closed circle for the long /o/ . The name Ωμέγα is Byzantine ; in Classical Greek , the letter was called ō ( ὦ ) (pronounced /ɔ̂ː/), whereas the omicron was called ou ( οὖ ) (pronounced /ôː/). The modern lowercase shape goes back to the uncial form [REDACTED] ,
288-541: A form that developed during the 3rd century BC in ancient handwriting on papyrus, from a flattened-out form of the letter ( [REDACTED] ) that had its edges curved even further upward. In addition to the Greek alphabet, Omega was also adopted into the early Cyrillic alphabet (see Cyrillic omega (Ѡ, ѡ)). A Raetic variant is conjectured to be at the origin or parallel evolution of the Elder Futhark ᛟ . Omega
336-425: A more fundamental basis for the definition of the ohm. Since 1990 the quantum Hall effect has been used to define the ohm with high precision and repeatability. The quantum Hall experiments are used to check the stability of working standards that have convenient values for comparison. Following the 2019 revision of the SI , in which the ampere and the kilogram were redefined in terms of fundamental constants ,
384-408: A paper at the British Association for the Advancement of Science meeting suggesting that standards for electrical units be established and suggesting names for these units derived from eminent philosophers, 'Ohma', 'Farad' and 'Volt'. The BAAS in 1861 appointed a committee including Maxwell and Thomson to report upon standards of electrical resistance. Their objectives were to devise a unit that
432-539: A reproducible standard, was defined by the international conference of electricians at Paris in 1884 as the resistance of a mercury column of specified weight and 106 cm long; this was a compromise value between the B. A. unit (equivalent to 104.7 cm), the Siemens unit (100 cm by definition), and the CGS unit. Although called "legal", this standard was not adopted by any national legislation. The "international" ohm
480-524: A standard, so units were not readily interchangeable. Electrical units so defined were not a coherent system with the units for energy, mass, length, and time, requiring conversion factors to be used in calculations relating energy or power to resistance. Two different methods of establishing a system of electrical units can be chosen. Various artifacts, such as a length of wire or a standard electrochemical cell, could be specified as producing defined quantities for resistance, voltage, and so on. Alternatively,
528-540: A symbol instead of Ω. In the electronics industry it is common to use the character R instead of the Ω symbol, thus, a 10 Ω resistor may be represented as 10R. This is part of the RKM code . It is used in many instances where the value has a decimal place. For example, 5.6 Ω is listed as 5R6, or 2200 Ω is listed as 2K2. This method avoids overlooking the decimal point, which may not be rendered reliably on components or when duplicating documents. Unicode encodes
SECTION 10
#1732772395061576-541: A turbine, which generates 648 MW e (i.e. electricity). Other SI prefixes are sometimes used, for example gigawatt electrical (GW e ). The International Bureau of Weights and Measures , which maintains the SI-standard, states that further information about a quantity should not be attached to the unit symbol but instead to the quantity symbol (e.g., P th = 270 W rather than P = 270 W th ) and so these unit symbols are non-SI. In compliance with SI,
624-424: A unit of time, namely 1 J/s. In this new definition, 1 absolute watt = 1.00019 international watts. Texts written before 1948 are likely to be using the international watt, which implies caution when comparing numerical values from this period with the post-1948 watt. In 1960, the 11th General Conference on Weights and Measures adopted the absolute watt into the International System of Units (SI) as
672-632: Is applied to the circuit (or where the resistance value is a function of time), the relation above is true at any instant, but calculation of average power over an interval of time requires integration of "instantaneous" power over that interval. Since the ohm belongs to a coherent system of units , when each of these quantities has its corresponding SI unit ( watt for P , ohm for R , volt for V and ampere for I , which are related as in § Definition ) this formula remains valid numerically when these units are used (and thought of as being cancelled or omitted). The rapid rise of electrotechnology in
720-476: Is desirable that one unit of electrical potential will force one unit of electric current through one unit of electrical resistance, doing one unit of work in one unit of time, otherwise, all electrical calculations will require conversion factors. Since so-called "absolute" units of charge and current are expressed as combinations of units of mass, length, and time, dimensional analysis of the relations between potential, current, and resistance show that resistance
768-563: Is expressed in units of length per time – a velocity. Some early definitions of a unit of resistance, for example, defined a unit resistance as one quadrant of the Earth per second. The absolute-unit system related magnetic and electrostatic quantities to metric base units of mass, time, and length. These units had the great advantage of simplifying the equations used in the solution of electromagnetic problems, and eliminated conversion factors in calculations about electrical quantities. However,
816-603: Is named after the Scottish inventor James Watt . The unit name was proposed by C. William Siemens in August 1882 in his President's Address to the Fifty-Second Congress of the British Association for the Advancement of Science . Noting that units in the practical system of units were named after leading physicists, Siemens proposed that watt might be an appropriate name for a unit of power. Siemens defined
864-405: Is the power, R is the resistance, V is the voltage across the resistor, and I is the current through the resistor. A linear resistor has a constant resistance value over all applied voltages or currents; many practical resistors are linear over a useful range of currents. Non-linear resistors have a value that may vary depending on the applied voltage (or current). Where alternating current
912-523: Is the rate at which electrical work is performed when a current of one ampere (A) flows across an electrical potential difference of one volt (V), meaning the watt is equivalent to the volt-ampere (the latter unit, however, is used for a different quantity from the real power of an electrical circuit). 1 W = 1 V ⋅ A . {\displaystyle \mathrm {1~W=1~V{\cdot }A} .} Two additional unit conversions for watt can be found using
960-530: Is used to quantify the rate of energy transfer . The watt is named in honor of James Watt (1736–1819), an 18th-century Scottish inventor , mechanical engineer , and chemist who improved the Newcomen engine with his own steam engine in 1776. Watt's invention was fundamental for the Industrial Revolution . When an object's velocity is held constant at one meter per second against
1008-409: The mid back rounded vowel IPA: [o̞] or IPA: [ɔ̝] . The letter omega is transliterated into a Latin-script alphabet as ō or simply o . As the final letter in the Greek alphabet, omega is often used to denote the last, the end, or the ultimate limit of a set , in contrast to alpha , the first letter of the Greek alphabet; see Alpha and Omega . Ω was not part of
SECTION 20
#17327723950611056-445: The "mho" ( ohm spelled backwards, symbol is ℧); it is the reciprocal of the ohm: 1 S = 1 Ω. The power dissipated by a resistor may be calculated from its resistance, and the voltage or current involved. The formula is a combination of Ohm's law and Joule's law : P = V I = V 2 R = I 2 R , {\displaystyle P=VI={\frac {V^{2}}{R}}=I^{2}R,} where P
1104-577: The Ancient Greek Ω represented a long open-mid back rounded vowel IPA: [ɔː] , comparable to the "aw" of the English word raw in dialects without the cot–caught merger , in contrast to omicron which represented the close-mid back rounded vowel IPA: [o] , and the digraph ου which represented the long close-mid back rounded vowel IPA: [oː] . In Modern Greek , both omega and omicron represent
1152-470: The above equation and Ohm's law . 1 W = 1 V 2 / Ω = 1 A 2 ⋅ Ω , {\displaystyle \mathrm {1~W=1~V^{2}/\Omega =1~A^{2}{\cdot }\Omega } ,} where ohm ( Ω {\displaystyle \Omega } ) is the SI derived unit of electrical resistance . The watt
1200-556: The basis for the legal definition of the ohm in several countries. In 1908, this definition was adopted by scientific representatives from several countries at the International Conference on Electric Units and Standards in London. The mercury column standard was maintained until the 1948 General Conference on Weights and Measures , at which the ohm was redefined in absolute terms instead of as an artifact standard. By
1248-474: The case of the thermistor , which exhibits a strong dependence of its resistance with temperature. In the US, a double vowel in the prefixed units "kiloohm" and "megaohm" is commonly simplified, producing "kilohm" and "megohm". In alternating current circuits, electrical impedance is also measured in ohms. The siemens (S) is the SI derived unit of electric conductance and admittance , historically known as
1296-540: The centimeter–gram–second, CGS, units turned out to have impractical sizes for practical measurements. Various artifact standards were proposed as the definition of the unit of resistance. In 1860 Werner Siemens (1816–1892) published a suggestion for a reproducible resistance standard in Poggendorff's Annalen der Physik und Chemie . He proposed a column of pure mercury, of one square millimeter cross section, one meter long: Siemens mercury unit . However, this unit
1344-453: The character Ω. Where the font is not supported, the same document may be displayed with a "W" ("10 W" instead of "10 Ω", for instance). As W represents the watt , the SI unit of power , this can lead to confusion, making the use of the correct Unicode code point preferable. Where the character set is limited to ASCII , the IEEE 260.1 standard recommends using the unit name "ohm" as
1392-528: The conductor a current of one ampere (A), the conductor not being the seat of any electromotive force . in which the following additional units appear: siemens (S), watt (W), second (s), farad (F), henry (H), weber (Wb), joule (J), coulomb (C), kilogram (kg), and meter (m). In many cases the resistance of a conductor is approximately constant within a certain range of voltages, temperatures, and other parameters. These are called linear resistors . In other cases resistance varies, such as in
1440-492: The definition was 1.3% too small. The error was significant for preparation of working standards. On 21 September 1881 the International Electrical Congress defined a practical unit of ohm for the resistance, based on CGS units, using a mercury column 1 mm in cross-section, approximately 104.9 cm in length at 0 °C, similar to the apparatus suggested by Siemens. A legal ohm,
1488-466: The early (8th century BC) Greek alphabets . It was introduced in the late 7th century BC in the Ionian cities of Asia Minor to denote a long open-mid back rounded vowel [ɔː] . It is a variant of omicron (Ο), broken up at the side ( [REDACTED] ), with the edges subsequently turned outward ( [REDACTED] , [REDACTED] , [REDACTED] , [REDACTED] ). The Dorian city of Knidos as well as
Ohm - Misplaced Pages Continue
1536-434: The electrical units can be related to the mechanical units by defining, for example, a unit of current that gives a specified force between two wires, or a unit of charge that gives a unit of force between two unit charges. This latter method ensures coherence with the units of energy. Defining a unit for resistance that is coherent with units of energy and time in effect also requires defining units for potential and current. It
1584-418: The end of the 19th century, units were well understood and consistent. Definitions would change with little effect on commercial uses of the units. Advances in metrology allowed definitions to be formulated with a high degree of precision and repeatability. The mercury column method of realizing a physical standard ohm turned out to be difficult to reproduce, owing to the effects of non-constant cross section of
1632-515: The energy company Ørsted A/S uses the unit megawatt for produced electrical power and the equivalent unit megajoule per second for delivered heating power in a combined heat and power station such as Avedøre Power Station . When describing alternating current (AC) electricity, another distinction is made between the watt and the volt-ampere . While these units are equivalent for simple resistive circuits , they differ when loads exhibit electrical reactance . Radio stations usually report
1680-574: The glass tubing. Various resistance coils were constructed by the British Association and others, to serve as physical artifact standards for the unit of resistance. The long-term stability and reproducibility of these artifacts was an ongoing field of research, as the effects of temperature, air pressure, humidity, and time on the standards were detected and analyzed. Artifact standards are still used, but metrology experiments relating accurately dimensioned inductors and capacitors provided
1728-431: The last half of the 19th century created a demand for a rational, coherent, consistent, and international system of units for electrical quantities. Telegraphers and other early users of electricity in the 19th century needed a practical standard unit of measurement for resistance. Resistance was often expressed as a multiple of the resistance of a standard length of telegraph wires; different agencies used different bases for
1776-460: The maximum power output it can achieve at any point in time. A power station's annual energy output, however, would be recorded using units of energy (not power), typically gigawatt hours. Major energy production or consumption is often expressed as terawatt hours for a given period; often a calendar year or financial year. One terawatt hour of energy is equal to a sustained power delivery of one terawatt for one hour, or approximately 114 megawatts for
1824-473: The ohm is now also defined in terms of these constants. The symbol Ω was suggested, because of the similar sound of ohm and omega, by William Henry Preece in 1867. In documents printed before Second World War the unit symbol often consisted of the raised lowercase omega (ω), such that 56 Ω was written as 56. Historically, some document editing software applications have used the Symbol typeface to render
1872-488: The power of their transmitters in units of watts, referring to the effective radiated power . This refers to the power that a half-wave dipole antenna would need to radiate to match the intensity of the transmitter's main lobe . The terms power and energy are closely related but distinct physical quantities. Power is the rate at which energy is generated or consumed and hence is measured in units (e.g. watts) that represent energy per unit time . For example, when
1920-620: The same. Omega Omega ( US : / oʊ ˈ m eɪ ɡ ə , - ˈ m ɛ ɡ ə , - ˈ m iː ɡ ə / , UK : / ˈ oʊ m ɪ ɡ ə / ; uppercase Ω , lowercase ω ; Ancient Greek ὦ, later ὦ μέγα, Modern Greek ωμέγα) is the twenty-fourth and last letter in the Greek alphabet . In the Greek numeric system / isopsephy ( gematria ), it has a value of 800. The word literally means "great O" ( o mega , mega meaning "great"), as opposed to omicron , which means "little O" ( o mikron , micron meaning "little"). In phonetic terms,
1968-410: The symbol as U+2126 Ω OHM SIGN , distinct from Greek omega among letterlike symbols , but it is only included for backward compatibility and the Greek uppercase omega character U+03A9 Ω GREEK CAPITAL LETTER OMEGA ( Ω, Ω ) is preferred. In MS-DOS and Microsoft Windows, the alt code ALT 234 may produce the Ω symbol. In Mac OS, ⌥ Opt + Z does
Ohm - Misplaced Pages Continue
2016-569: The unit of power. In the electric power industry , megawatt electrical ( MWe or MW e ) refers by convention to the electric power produced by a generator, while megawatt thermal or thermal megawatt (MWt, MW t , or MWth, MW th ) refers to thermal power produced by the plant. For example, the Embalse nuclear power plant in Argentina uses a fission reactor to generate 2,109 MW t (i.e. heat), which creates steam to drive
2064-440: The unit within the existing system of practical units as "the power conveyed by a current of an Ampère through the difference of potential of a Volt". In October 1908, at the International Conference on Electric Units and Standards in London, so-called international definitions were established for practical electrical units. Siemens' definition was adopted as the international watt. (Also used: 1 A × 1 Ω.) The watt
2112-538: Was also adopted into the Latin alphabet, as a letter of the 1982 revision to the African reference alphabet . It's in sparse use (see Latin omega ). The uppercase letter Ω is used as a symbol: The minuscule letter ω is used as a symbol: Watt The watt (symbol: W ) is the unit of power or radiant flux in the International System of Units (SI), equal to 1 joule per second or 1 kg⋅m ⋅s . It
2160-420: Was defined as equal to 10 units of power in the practical system of units. The "international units" were dominant from 1909 until 1948. After the 9th General Conference on Weights and Measures in 1948, the international watt was redefined from practical units to absolute units (i.e., using only length, mass, and time). Concretely, this meant that 1 watt was defined as the quantity of energy transferred in
2208-454: Was not coherent with other units. One proposal was to devise a unit based on a mercury column that would be coherent – in effect, adjusting the length to make the resistance one ohm. Not all users of units had the resources to carry out metrology experiments to the required precision, so working standards notionally based on the physical definition were required. In 1861, Latimer Clark (1822–1898) and Sir Charles Bright (1832–1888) presented
2256-468: Was of convenient size, part of a complete system for electrical measurements, coherent with the units for energy, stable, reproducible and based on the French metrical system. In the third report of the committee, 1864, the resistance unit is referred to as "B.A. unit, or Ohmad". By 1867 the unit is referred to as simply ohm . The B.A. ohm was intended to be 10 CGS units but owing to an error in calculations
2304-581: Was recommended by unanimous resolution at the International Electrical Congress 1893 in Chicago. The unit was based upon the ohm equal to 10 units of resistance of the C.G.S. system of electromagnetic units. The international ohm is represented by the resistance offered to an unvarying electric current in a mercury column of constant cross-sectional area 106.3 cm long of mass 14.4521 grams and 0 °C. This definition became
#60939