Misplaced Pages

#824175

61-770: The Lake Minatare Lighthouse is a historic mock lighthouse located on Lake Minatare near the city of Scottsbluff in Nebraska . The 55-foot (17 m) tower was built by the Veterans Conservation Corps in 1939 and is currently located within the North Platte National Wildlife Refuge . Designed as a combination shelter house and observation tower, it was "built to simulate a lighthouse." 41°55′50″N 103°30′05″W  /  41.93056°N 103.50139°W  / 41.93056; -103.50139 This article about

122-402: A rescue service , if necessary. Improvements in maritime navigation and safety, such Global Positioning System (GPS), led to the phasing out of non-automated lighthouses across the world. Although several closed due to safety concerns, Canada still maintains 49 staffed lighthouses, split roughly evenly across east and west coasts. The remaining modern lighthouses are usually illuminated by

183-446: A 'half-blind dovetail' when they do not want the end grain visible from the front of the joint. The tails fit into mortises in the ends of the board that is the front of the item, hiding their ends. Half-blind dovetails are commonly used to fasten drawer fronts to drawer sides. This is an alternative to the practice of attaching false fronts to drawers constructed using through dovetails. The 'secret mitred dovetail' joint (also called

244-422: A 'mitred blind dovetail', 'full-blind dovetail', or 'full-blind mitred dovetail') is used in the highest class of cabinet and box work. It offers the strength found in the dovetail joint but is totally hidden from both outside faces by forming the outer edge to meet at a 45-degree angle while hiding the dovetails internally within the joint. The mitred corner dovetail joint is very similar in design, but it has just

305-640: A Diesel generator for backup. Many Fresnel lens installations have been replaced by rotating aerobeacons , which require less maintenance. In modern automated lighthouses, the system of rotating lenses is often replaced by a high intensity light that emits brief omnidirectional flashes, concentrating the light in time rather than direction. These lights are similar to obstruction lights used to warn aircraft of tall structures. Later innovations were "Vega Lights", and experiments with light-emitting diode (LED) panels. LED lights, which use less energy and are easier to maintain, had come into widespread use by 2020. In

366-499: A building or structure in Nebraska is a stub . You can help Misplaced Pages by expanding it . This article relating to a United States lighthouse is a stub . You can help Misplaced Pages by expanding it . Lighthouse Lighthouses mark dangerous coastlines, hazardous shoals , reefs , rocks, and safe entries to harbors; they also assist in aerial navigation . Once widely used, the number of operational lighthouses has declined due to

427-436: A filament source. Experimental installations of laser lights, either at high power to provide a "line of light" in the sky or, utilising low power, aimed towards mariners have identified problems of increased complexity in installation and maintenance, and high power requirements. The first practical installation, in 1971 at Point Danger lighthouse , Queensland , was replaced by a conventional light after four years, because

488-457: A form of concrete that will set under water used by the Romans, and developed a technique of securing the granite blocks together using dovetail joints and marble dowels . The dovetailing feature served to improve the structural stability , although Smeaton also had to taper the thickness of the tower towards the top, for which he curved the tower inwards on a gentle gradient. This profile had

549-414: A horizontal plane, and horizontally the light is focused into one or a few directions at a time, with the light beam swept around. As a result, in addition to seeing the side of the light beam, the light is directly visible from greater distances, and with an identifying light characteristic . This concentration of light is accomplished with a rotating lens assembly. In early lighthouses, the light source

610-427: A more powerful hyperradiant Fresnel lens manufactured by the firm of Chance Brothers . While lighthouse buildings differ depending on the location and purpose, they tend to have common components. A light station comprises the lighthouse tower and all outbuildings, such as the keeper's living quarters, fuel house, boathouse, and fog-signaling building. The Lighthouse itself consists of a tower structure supporting

671-602: A navigator with a line of position called a range in North America and a transit in Britain. Ranges can be used to precisely align a vessel within a narrow channel such as a river. With landmarks of a range illuminated with a set of fixed lighthouses, nighttime navigation is possible. Such paired lighthouses are called range lights in North America and leading lights in the United Kingdom. The closer light

SECTION 10

#1732794399825

732-521: A number of screw-pile lighthouses. Englishman James Douglass was knighted for his work on the fourth Eddystone Lighthouse. United States Army Corps of Engineers Lieutenant George Meade built numerous lighthouses along the Atlantic and Gulf coasts before gaining wider fame as the winning general at the Battle of Gettysburg . Colonel Orlando M. Poe , engineer to General William Tecumseh Sherman in

793-402: A particular color (usually formed by colored panes in the lantern) to distinguish safe water areas from dangerous shoals. Modern lighthouses often have unique reflectors or racon transponders so the radar signature of the light is also unique. Before modern strobe lights , lenses were used to concentrate the light from a continuous source. Vertical light rays of the lamp are redirected into

854-411: A reservoir mounted above the burner. The lamp was first produced by Matthew Boulton , in partnership with Argand, in 1784, and became the standard for lighthouses for over a century. South Foreland Lighthouse was the first tower to successfully use an electric light in 1875. The lighthouse's carbon arc lamps were powered by a steam-driven magneto . John Richardson Wigham was the first to develop

915-419: A single dovetail and is used for picture frames and other similar joins. The secret double-lapped dovetail is similar to the secret mitred dovetail, but presents a very thin section of end grain on one edge of the joint. Used for carcass and box construction to hide the dovetails completely from view. The sliding dovetail is a method of joining two boards at right angles, where the intersection occurs within

976-415: A single stationary flashing light powered by solar-charged batteries and mounted on a steel skeleton tower. Where the power requirement is too great for solar power alone, cycle charging of the battery by a Diesel generator is provided. The generator only comes into use when the battery needs charging, saving fuel and increasing periods between maintenance. John Smeaton is noteworthy for having designed

1037-477: A system for gas illumination of lighthouses. His improved gas 'crocus' burner at the Baily Lighthouse near Dublin was 13 times more powerful than the most brilliant light then known. The vaporized oil burner was invented in 1901 by Arthur Kitson , and improved by David Hood at Trinity House . The fuel was vaporized at high pressure and burned to heat the mantle, giving an output of over six times

1098-505: A warning signal for reefs and promontories , unlike many modern lighthouses. The most famous lighthouse structure from antiquity was the Pharos of Alexandria , Egypt , which collapsed following a series of earthquakes between 956 and 1323. The intact Tower of Hercules at A Coruña , Spain gives insight into ancient lighthouse construction; other evidence about lighthouses exists in depictions on coins and mosaics, of which many represent

1159-425: Is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, log buildings , and traditional timber framing . Noted for its resistance to being pulled apart, also known as tensile strength , the dovetail joint is commonly used to join the sides of a drawer to the front. A series of pins cut to extend from the end of one board interlock with a series of 'tails' cut into

1220-458: Is assembled. Through dovetails are common in carcass and box construction. Traditionally, the dovetails would have often been covered by a veneer. However, dovetails have become a signature of craftsmanship and are generally considered a feature, so they are rarely concealed in contemporary work. When used in drawer construction, a through (or blind, mitred , or lapped) dovetail joint is sometimes referred to as an "English dovetail." Craftsmen use

1281-419: Is one example. Race Rocks Light in western Canada is painted in horizontal black and white bands to stand out against the horizon. For effectiveness, the lamp must be high enough to be seen before the danger is reached by a mariner. The minimum height is calculated by trigonometry (see Distance to the horizon ) as D = 1.22 H {\displaystyle D=1.22{\sqrt {H}}} , where H

SECTION 20

#1732794399825

1342-514: Is referred to as the beacon or front range; the further light is called the rear range. The rear range light is almost always taller than the front. When a vessel is on the correct course, the two lights align vertically, but when the observer is out of position, the difference in alignment indicates the direction of travel to correct the course. There are two types of lighthouses: ones that are located on land, and ones that are offshore. Dovetail joint A dovetail joint or simply dovetail

1403-510: Is the height above water in feet, and D is the distance from the lighthouse to the horizon in nautical miles, the lighthouse range . Where dangerous shoals are located far off a flat sandy beach, the prototypical tall masonry coastal lighthouse is constructed to assist the navigator making a landfall after an ocean crossing. Often these are cylindrical to reduce the effect of wind on a tall structure, such as Cape May Light . Smaller versions of this design are often used as harbor lights to mark

1464-470: Is very strong because of the way the 'tails' and 'pins' are shaped. This makes it difficult to pull the joint apart and virtually impossible when glue is added. This type of joint is used in box constructions such as drawers, jewellery boxes, cabinets and other pieces of furniture where strength is required. It is a difficult joint to make manually, requiring skilled workmanship. There are different types of dovetail joints. The angle of slope varies according to

1525-622: The Florida Reef along the Florida Keys, beginning with the Carysfort Reef Light in 1852. In waters too deep for a conventional structure, a lightship might be used instead of a lighthouse, such as the former lightship Columbia . Most of these have now been replaced by fixed light platforms (such as Ambrose Light ) similar to those used for offshore oil exploration . Aligning two fixed points on land provides

1586-570: The Vazhappally Maha Siva Temple in India. The dovetail design is an important method of distinguishing various periods of furniture. The etymology of the name comes from the resemblance between the tenon or mortise of the joint to the shape of a dove's tail . In Europe, the dovetail joint is sometimes called a swallowtail joint, a culvertail joint ( culver also means 'dove'), or a fantail joint. The dovetail joint

1647-513: The 20th century. These often have a narrow cylindrical core surrounded by an open lattice work bracing, such as Finns Point Range Light . Sometimes a lighthouse needs to be constructed in the water itself. Wave-washed lighthouses are masonry structures constructed to withstand water impact, such as Eddystone Lighthouse in Britain and the St. George Reef Light of California. In shallower bays, Screw-pile lighthouse ironwork structures are screwed into

1708-466: The Swiss scientist Aimé Argand revolutionized lighthouse illumination with its steady smokeless flame. Early models used ground glass which was sometimes tinted around the wick. Later models used a mantle of thorium dioxide suspended over the flame, creating a bright, steady light. The Argand lamp used whale oil , colza , olive oil or other vegetable oil as fuel, supplied by a gravity feed from

1769-405: The United Kingdom and Ireland about a third of lighthouses had been converted from filament light sources to use LEDs, and conversion continued with about three per year. The light sources are designed to replicate the colour and character of the traditional light as closely as possible. The change is often not noticed by people in the region, but sometimes a proposed change leads to calls to preserve

1830-495: The added advantage of allowing some of the energy of the waves to dissipate on impact with the walls. His lighthouse was the prototype for the modern lighthouse and influenced all subsequent engineers. One such influence was Robert Stevenson , himself a seminal figure in the development of lighthouse design and construction. His greatest achievement was the construction of the Bell Rock Lighthouse in 1810, one of

1891-491: The beam was too narrow to be seen easily. In any of these designs an observer, rather than seeing a continuous weak light, sees a brighter light during short time intervals. These instants of bright light are arranged to create a light characteristic or pattern specific to a lighthouse. For example, the Scheveningen Lighthouse flashes are alternately 2.5 and 7.5 seconds. Some lights have sectors of

Lake Minatare Lighthouse - Misplaced Pages Continue

1952-406: The choice of light sources, mountings, reflector design, the use of Fresnel lenses , and in rotation and shuttering systems providing lighthouses with individual signatures allowing them to be identified by seafarers. He also invented the movable jib and the balance-crane as a necessary part for lighthouse construction. Alexander Mitchell designed the first screw-pile lighthouse – his lighthouse

2013-533: The collapse of the Soviet government in 1990s, most of the official records on the locations, and condition, of these lighthouses were reportedly lost. Over time, the condition of RTGs in Russia degraded; many of them fell victim to vandalism and scrap metal thieves, who may not have been aware of the dangerous radioactive contents. Energy-efficient LED lights can be powered by solar panels , with batteries instead of

2074-488: The construction of lenses of large aperture and short focal length , without the mass and volume of material that would be required by a lens of conventional design. A Fresnel lens can be made much thinner than a comparable conventional lens, in some cases taking the form of a flat sheet. A Fresnel lens can also capture more oblique light from a light source, thus allowing the light from a lighthouse equipped with one to be visible over greater distances. The first Fresnel lens

2135-473: The emitted light into a concentrated beam, thereby greatly increasing the light's visibility. The ability to focus the light led to the first revolving lighthouse beams, where the light would appear to the mariners as a series of intermittent flashes. It also became possible to transmit complex signals using the light flashes. French physicist and engineer Augustin-Jean Fresnel developed the multi-part Fresnel lens for use in lighthouses. His design allowed for

2196-401: The end of another board. The pins and tails have a trapezoidal shape. Once glued, a wooden dovetail joint requires no mechanical fasteners. The dovetail joint technique probably pre-dates written history. Some of the earliest known examples of the dovetail joint are in ancient Egyptian furniture entombed with mummies dating from First Dynasty, the tombs of Chinese emperors, and a stone pillar at

2257-475: The entrance into a harbor, such as New London Harbor Light . Where a tall cliff exists, a smaller structure may be placed on top such as at Horton Point Light . Sometimes, such a location can be too high, for example along the west coast of the United States, where frequent low clouds can obscure the light. In these cases, lighthouses are placed below the clifftop to ensure that they can still be seen at

2318-464: The expense of maintenance and the advent of much cheaper, more sophisticated, and more effective electronic navigational systems. Before the development of clearly defined ports , mariners were guided by fires built on hilltops. Since elevating the fire would improve visibility, placing the fire on a platform became a practice that led to the development of the lighthouse. In antiquity, the lighthouse functioned more as an entrance marker to ports than as

2379-436: The field of one of the boards, that is not at the end. This joint provides the interlocking strength of a dovetail. Sliding dovetails are assembled by sliding the tail into the socket. It is common to slightly taper the socket, making it slightly tighter towards the rear of the joint, so that the two components can be slid together easily but the joint becomes tighter as the finished position is reached. Another method to implement

2440-455: The lantern room where the light operates. The lantern room is the glassed-in housing at the top of a lighthouse tower containing the lamp and lens. Its glass storm panes are supported by metal muntins (glazing bars) running vertically or diagonally. At the top of the lantern room is a stormproof ventilator designed to remove the smoke of the lamps and the heat that builds in the glass enclosure. A lightning rod and grounding system connected to

2501-535: The light is concentrated, if needed, by the "lens" or "optic". Power sources for lighthouses in the 20th–21st centuries vary. Originally lit by open fires and later candles, the Argand hollow wick lamp and parabolic reflector were introduced in the late 18th century. Whale oil was also used with wicks as the source of light. Kerosene became popular in the 1870s and electricity and acetylene gas derived on-site from calcium carbide began replacing kerosene around

Lake Minatare Lighthouse - Misplaced Pages Continue

2562-509: The lighthouse at Ostia . Coins from Alexandria, Ostia, and Laodicea in Syria also exist. The modern era of lighthouses began at the turn of the 18th century, as the number of lighthouses being constructed increased significantly due to much higher levels of transatlantic commerce. Advances in structural engineering and new and efficient lighting equipment allowed for the creation of larger and more powerful lighthouses, including ones exposed to

2623-469: The lighthouse keepers. Efficiently concentrating the light from a large omnidirectional light source requires a very large diameter lens. This would require a very thick and heavy lens if a conventional lens were used. The Fresnel lens (pronounced / f r eɪ ˈ n ɛ l / ) focused 85% of a lamp's light versus the 20% focused with the parabolic reflectors of the time. Its design enabled construction of lenses of large size and short focal length without

2684-470: The luminosity of traditional oil lights. The use of gas as illuminant became widely available with the invention of the Dalén light by Swedish engineer Gustaf Dalén . He used Agamassan (Aga), a substrate , to absorb the gas, allowing the gas to be stored, and hence used, safely. Dalén also invented the ' sun valve ', which automatically regulated the light and turned it off during the daytime. The technology

2745-421: The metal cupola roof provides a safe conduit for any lightning strikes. Immediately beneath the lantern room is usually a Watch Room or Service Room where fuel and other supplies were kept and where the keeper prepared the lanterns for the night and often stood watch. The clockworks (for rotating the lenses) were also located there. On a lighthouse tower, an open platform called the gallery is often located outside

2806-496: The most impressive feats of engineering of the age. This structure was based upon Smeaton's design, but with several improved features, such as the incorporation of rotating lights, alternating between red and white. Stevenson worked for the Northern Lighthouse Board for nearly fifty years during which time he designed and oversaw the construction and later improvement of numerous lighthouses. He innovated in

2867-465: The sea. The function of lighthouses was gradually changed from indicating ports to the providing of a visible warning against shipping hazards, such as rocks or reefs. The Eddystone Rocks were a major shipwreck hazard for mariners sailing through the English Channel . The first lighthouse built there was an octagonal wooden structure, anchored by 12 iron stanchions secured in the rock, and

2928-451: The seabed and a low wooden structure is placed above the open framework, such as Thomas Point Shoal Lighthouse . As screw piles can be disrupted by ice, steel caisson lighthouses such as Orient Point Light are used in cold climates. Orient Long Beach Bar Light (Bug Light) is a blend of a screw pile light that was converted to a caisson light because of the threat of ice damage. Skeletal iron towers with screw-pile foundations were built on

2989-554: The siege of Atlanta, designed and built some of the most exotic lighthouses in the most difficult locations on the U.S. Great Lakes . French merchant navy officer Marius Michel Pasha built almost a hundred lighthouses along the coasts of the Ottoman Empire in a period of twenty years after the Crimean War (1853–1856). In a lighthouse, the source of light is called the "lamp" (whether electric or fuelled by oil) and

3050-528: The surface during periods of fog or low clouds, as at Point Reyes Lighthouse . Another example is in San Diego , California : the Old Point Loma lighthouse was too high up and often obscured by fog, so it was replaced in 1891 with a lower lighthouse, New Point Loma lighthouse . As technology advanced, prefabricated skeletal iron or steel structures tended to be used for lighthouses constructed in

3111-599: The third and most famous Eddystone Lighthouse , but some builders are well known for their work in building multiple lighthouses. The Stevenson family ( Robert , Alan , David , Thomas , David Alan , and Charles ) made lighthouse building a three-generation profession in Scotland. Richard Henry Brunton designed and built 26 Japanese lighthouses in Meiji Era Japan, which became known as Brunton's "children". Blind Irishman Alexander Mitchell invented and built

SECTION 50

#1732794399825

3172-486: The traditional light, including in some cases a rotating beam. A typical LED system designed to fit into the traditional 19th century Fresnel lens enclosure was developed by Trinity House and two other lighthouse authorities and costs about € 20,000, depending on configuration, according to a supplier; it has large fins to dissipate heat. Lifetime of the LED light source is 50,000 to 100,000 hours, compared to about 1,000 hours for

3233-480: The turn of the 20th century. Carbide was promoted by the Dalén light , which automatically lit the lamp at nightfall and extinguished it at dawn. In the second half of the 20th century, many remote lighthouses in Russia (then Soviet Union ) were powered by radioisotope thermoelectric generators (RTGs). These had the advantage of providing power day or night and did not need refuelling or maintenance. However, after

3294-535: The watch room (called the Main Gallery) or Lantern Room (Lantern Gallery). This was mainly used for cleaning the outside of the windows of the Lantern Room. Lighthouses near to each other that are similar in shape are often painted in a unique pattern so they can easily be recognized during daylight, a marking known as a daymark . The black and white barber pole spiral pattern of Cape Hatteras Lighthouse

3355-643: The weight and volume of material in conventional lens designs. Fresnel lighthouse lenses are ranked by order , a measure of refracting power, with a first order lens being the largest, most powerful and expensive; and a sixth order lens being the smallest. The order is based on the focal length of the lens. A first order lens has the longest focal length, with the sixth being the shortest. Coastal lighthouses generally use first, second, or third order lenses, while harbor lights and beacons use fourth, fifth, or sixth order lenses. Some lighthouses, such as those at Cape Race , Newfoundland, and Makapuu Point , Hawaii, used

3416-401: The wood used, purpose of joint and type of work. Typically the slope is 1:6 for softwoods , and a shallower 1:8 slope for hardwoods . Often a slope of 1:7 is used as a compromise. However, a different slope does not affect the strength of the joint in different types of wood. A 'through dovetail' (also known as 'plain dovetail') joint leaves the end grain of both boards visible when the joint

3477-437: Was a kerosene lamp or, earlier, an animal or vegetable oil Argand lamp, and the lenses rotated by a weight driven clockwork assembly wound by lighthouse keepers, sometimes as often as every two hours. The lens assembly sometimes floated in liquid mercury to reduce friction. In more modern lighthouses, electric lights and motor drives were used, generally powered by diesel electric generators. These also supplied electricity for

3538-459: Was built by Henry Winstanley from 1696 to 1698. His lighthouse was the first tower in the world to have been fully exposed to the open sea. The civil engineer John Smeaton rebuilt the lighthouse from 1756 to 1759; his tower marked a major step forward in the design of lighthouses and remained in use until 1877. He modeled the shape of his lighthouse on that of an oak tree , using granite blocks. He rediscovered and used " hydraulic lime ",

3599-683: Was built on piles that were screwed into the sandy or muddy seabed. Construction of his design began in 1838 at the mouth of the Thames and was known as the Maplin Sands lighthouse, and first lit in 1841. Although its construction began later, the Wyre Light in Fleetwood, Lancashire, was the first to be lit (in 1840). Until 1782 the source of illumination had generally been wood pyres or burning coal. The Argand lamp , invented in 1782 by

3660-506: Was the predominant light source in lighthouses from the 1900s to the 1960s, when electric lighting had become dominant. With the development of the steady illumination of the Argand lamp, the application of optical lenses to increase and focus the light intensity became a practical possibility. William Hutchinson developed the first practical optical system in 1777, known as a catoptric system. This rudimentary system effectively collimated

3721-598: Was used in 1823 in the Cordouan lighthouse at the mouth of the Gironde estuary ; its light could be seen from more than 20 miles (32 km) out. Fresnel's invention increased the luminosity of the lighthouse lamp by a factor of four and his system is still in common use. The introduction of electrification and automatic lamp changers began to make lighthouse keepers obsolete. For many years, lighthouses still had keepers, partly because lighthouse keepers could serve as

SECTION 60

#1732794399825
#824175