Misplaced Pages

#801198

57-485: The building was made of reinforced concrete and combined elements of a theater, concert hall, and trade show and convention auditorium. Parabolic pylons supported the exterior grand cantilevered canopy fronting a glass curtain wall and brise soleil , a patterned wall that reduced the effects of the sun's glare. For trade shows, the Civic Auditorium features 11,775 sq ft (1,093.9 m), while

114-732: A $ 51.9-million renovation using redevelopment funds and negotiated with the Nederlander Organization to book events. That effort was suspended after Governor Jerry Brown dissolved community redevelopment agencies. Per the Santa Monica Mirror newspaper, the auditorium was expected to close in July 2013 for at least five years. It needs at least $ 23 million in seismic and accessibly upgrades. A complete renovation would exceed $ 50 million. From an economic perspective, it would be cheaper to replace it, but many consider it

171-418: A concert venue it can seat 3,000, as a banquet hall 720 in tables, and as a sports arena it can seat up to 2,500. The most widely touted innovation was the auditorium's main floor, which in a matter of seconds could be tilted by a hydraulic mechanism to form raked seating for theatrical productions or a flat surface for dancing or exhibits. The main floor of the auditorium can thus be raised or lowered to create

228-509: A landmark worth preserving. The city has an annual budget of more than half of a billion dollars and is considering its priorities. Phish made their only appearance at the venue on December 10, 1994, which was the final show of their 1994 fall tour. "As of 2016 the Santa Monica Civic Auditorium is currently available for limited filming, photo shoots, private events, and meetings". The Civic Auditorium parking lot

285-453: A major role in the evolution of concrete construction as a proven and studied science. Without Hyatt's work, more dangerous trial and error methods might have been depended on for the advancement in the technology. Joseph Monier , a 19th-century French gardener, was a pioneer in the development of structural, prefabricated and reinforced concrete, having been dissatisfied with the existing materials available for making durable flowerpots. He

342-519: A raked floor for theatre seating or a level floor for exhibits. The parcel includes the auditorium and surrounding land bounded on the north by the county building, on the west by Main Street, on the east by 4th Street and on the south by Pico Boulevard . The Santa Monica Civic Auditorium opened in summer 1958, then the second-largest auditorium in the Los Angeles area. It was constructed in what

399-419: A reduction in its durability. Corrosion and freeze/thaw cycles may damage poorly designed or constructed reinforced concrete. When rebar corrodes, the oxidation products ( rust ) expand and tends to flake, cracking the concrete and unbonding the rebar from the concrete. Typical mechanisms leading to durability problems are discussed below. Cracking of the concrete section is nearly impossible to prevent; however,

456-426: A well-chosen concrete mix will provide additional protection for many applications. Uncoated, low carbon/chromium rebar looks similar to standard carbon steel rebar due to its lack of a coating; its highly corrosion-resistant features are inherent in the steel microstructure. It can be identified by the unique ASTM specified mill marking on its smooth, dark charcoal finish. Epoxy-coated rebar can easily be identified by

513-658: Is a mixture of coarse (stone or brick chips) and fine (generally sand and/or crushed stone) aggregates with a paste of binder material (usually Portland cement ) and water. When cement is mixed with a small amount of water, it hydrates to form microscopic opaque crystal lattices encapsulating and locking the aggregate into a rigid shape. The aggregates used for making concrete should be free from harmful substances like organic impurities, silt, clay, lignite, etc. Typical concrete mixes have high resistance to compressive stresses (about 4,000 psi (28 MPa)); however, any appreciable tension ( e.g., due to bending ) will break

570-607: Is also used for shows like the AltCar Expo Conference that took place in September 2016. The AltCar Expo features hi-tech electric vehicles equipped with latest technology. Reinforced concrete Reinforced concrete , also called ferroconcrete , is a composite material in which concrete 's relatively low tensile strength and ductility are compensated for by the inclusion of reinforcement having higher tensile strength or ductility. The reinforcement

627-528: Is coating them with zinc phosphate . Zinc phosphate slowly reacts with calcium cations and the hydroxyl anions present in the cement pore water and forms a stable hydroxyapatite layer. Penetrating sealants typically must be applied some time after curing. Sealants include paint, plastic foams, films and aluminum foil , felts or fabric mats sealed with tar, and layers of bentonite clay, sometimes used to seal roadbeds. Corrosion inhibitors , such as calcium nitrite [Ca(NO 2 ) 2 ], can also be added to

SECTION 10

#1732772059802

684-504: Is located across the bay from San Francisco . Two years later, El Campanil survived the 1906 San Francisco earthquake without any damage, which helped build her reputation and launch her prolific career. The 1906 earthquake also changed the public's initial resistance to reinforced concrete as a building material, which had been criticized for its perceived dullness. In 1908, the San Francisco Board of Supervisors changed

741-541: Is one in which both the compressive and tensile zones reach yielding at the same imposed load on the beam, and the concrete will crush and the tensile steel will yield at the same time. This design criterion is however as risky as over-reinforced concrete, because failure is sudden as the concrete crushes at the same time of the tensile steel yields, which gives a very little warning of distress in tension failure. Steel-reinforced concrete moment-carrying elements should normally be designed to be under-reinforced so that users of

798-428: Is one in which the concrete element is only reinforced near the tensile face and the reinforcement, called tension steel, is designed to resist the tension. A doubly reinforced beam is the section in which besides the tensile reinforcement the concrete element is also reinforced near the compressive face to help the concrete resist compression and take stresses. The latter reinforcement is called compression steel. When

855-430: Is one in which the tension capacity of the tension steel is greater than the combined compression capacity of the concrete and the compression steel (over-reinforced at tensile face). So the "over-reinforced concrete" beam fails by crushing of the compressive-zone concrete and before the tension zone steel yields, which does not provide any warning before failure as the failure is instantaneous. A balanced-reinforced beam

912-532: Is the governing body of Santa Monica, California . The council meets on the second and fourth Tuesday of each month. Council-Manager form of government, with seven Council members elected at-large. The new Charter was adopted in 1946. Commission form of government. Under the new charter, the City government now consisted of 3 departments: Public Safety, Public Works and Finance with one elected Commissioner responsible for each department. The City Council consisted of

969-579: Is the theoretical failure point with a certain probability. It is stated under factored loads and factored resistances. Reinforced concrete structures are normally designed according to rules and regulations or recommendation of a code such as ACI-318, CEB, Eurocode 2 or the like. WSD, USD or LRFD methods are used in design of RC structural members. Analysis and design of RC members can be carried out by using linear or non-linear approaches. When applying safety factors, building codes normally propose linear approaches, but for some cases non-linear approaches. To see

1026-446: Is transferred from the concrete to the bar interface so as to change the tensile stress in the reinforcing bar along its length. This load transfer is achieved by means of bond (anchorage) and is idealized as a continuous stress field that develops in the vicinity of the steel-concrete interface. The reasons that the two different material components concrete and steel can work together are as follows: (1) Reinforcement can be well bonded to

1083-404: Is usually, though not necessarily, steel reinforcing bars (known as rebar ) and is usually embedded passively in the concrete before the concrete sets. However, post-tensioning is also employed as a technique to reinforce the concrete. In terms of volume used annually, it is one of the most common engineering materials. In corrosion engineering terms, when designed correctly, the alkalinity of

1140-528: The Santa Monica City Council discussed a preliminary report containing four plans calling for various combinations of office buildings, a hotel, a museum, a conference center, a playhouse, parking garages and open space and, in two of the plans, demolition of the auditorium. By the 2000s, the Civic Auditorium was operating at an annual deficit of as much as $ 2 million, which the city has had to cover. The City of Santa Monica began to plan for

1197-468: The tensile strength of concrete was improved by the reinforcing. Before the 1870s, the use of concrete construction, though dating back to the Roman Empire , and having been reintroduced in the early 19th century, was not yet a proven scientific technology. Ernest L. Ransome , an English-born engineer, was an early innovator of reinforced concrete techniques at the end of the 19th century. Using

SECTION 20

#1732772059802

1254-719: The 1890s, Wayss and his firm greatly contributed to the advancement of Monier's system of reinforcing, established it as a well-developed scientific technology. One of the first skyscrapers made with reinforced concrete was the 16-story Ingalls Building in Cincinnati, constructed in 1904. The first reinforced concrete building in Southern California was the Laughlin Annex in downtown Los Angeles , constructed in 1905. In 1906, 16 building permits were reportedly issued for reinforced concrete buildings in

1311-646: The City of Los Angeles, including the Temple Auditorium and 8-story Hayward Hotel. In 1906, a partial collapse of the Bixby Hotel in Long Beach killed 10 workers during construction when shoring was removed prematurely. That event spurred a scrutiny of concrete erection practices and building inspections. The structure was constructed of reinforced concrete frames with hollow clay tile ribbed flooring and hollow clay tile infill walls. That practice

1368-607: The English counties of Norfolk and Suffolk. In 1877, Thaddeus Hyatt , published a report entitled An Account of Some Experiments with Portland-Cement-Concrete Combined with Iron as a Building Material, with Reference to Economy of Metal in Construction and for Security against Fire in the Making of Roofs, Floors, and Walking Surfaces , in which he reported his experiments on the behaviour of reinforced concrete. His work played

1425-695: The actual available length is inadequate for full development, special anchorages must be provided, such as cogs or hooks or mechanical end plates. The same concept applies to lap splice length mentioned in the codes where splices (overlapping) provided between two adjacent bars in order to maintain the required continuity of stress in the splice zone. In wet and cold climates, reinforced concrete for roads, bridges, parking structures and other structures that may be exposed to deicing salt may benefit from use of corrosion-resistant reinforcement such as uncoated, low carbon/chromium (micro composite), epoxy-coated, hot dip galvanized or stainless steel rebar. Good design and

1482-461: The actual bond stress varies along the length of a bar anchored in a zone of tension, current international codes of specifications use the concept of development length rather than bond stress. The main requirement for safety against bond failure is to provide a sufficient extension of the length of the bar beyond the point where the steel is required to develop its yield stress and this length must be at least equal to its development length. However, if

1539-666: The auditorium was host to the T.A.M.I. Show , a filmed concert featuring James Brown and The Rolling Stones . A home of the Academy Awards from 1961 to 1968, the auditorium remains home to the Santa Monica Symphony Orchestra. Pink Floyd performed there on May 1, 1970. George Carlin 's album Class Clown was recorded at the auditorium on May 27, 1972, and was released later that year on September 29. Carlin first performed his infamous monologue " Seven Words You Can Never Say on Television " at

1596-479: The behavior of the final structure under working loads. In the United States , the most common methods of doing this are known as pre-tensioning and post-tensioning . For a strong, ductile and durable construction the reinforcement needs to have the following properties at least: François Coignet used iron-reinforced concrete as a technique for constructing building structures. In 1853, Coignet built

1653-543: The chief reasons for the failure of reinforcement bars in concrete. The relative cross-sectional area of steel required for typical reinforced concrete is usually quite small and varies from 1% for most beams and slabs to 6% for some columns. Reinforcing bars are normally round in cross-section and vary in diameter. Reinforced concrete structures sometimes have provisions such as ventilated hollow cores to control their moisture & humidity. Distribution of concrete (in spite of reinforcement) strength characteristics along

1710-756: The city's building codes to allow wider use of reinforced concrete. In 1906, the National Association of Cement Users (NACU) published Standard No. 1 and, in 1910, the Standard Building Regulations for the Use of Reinforced Concrete . Many different types of structures and components of structures can be built using reinforced concrete elements including slabs , walls , beams , columns , foundations , frames and more. Reinforced concrete can be classified as precast or cast-in-place concrete . Designing and implementing

1767-422: The compression zone of a concrete is inadequate to resist the compressive moment (positive moment), extra reinforcement has to be provided if the architect limits the dimensions of the section. An under-reinforced beam is one in which the tension capacity of the tensile reinforcement is smaller than the combined compression capacity of the concrete and the compression steel (under-reinforced at tensile face). When

Santa Monica Civic Auditorium - Misplaced Pages Continue

1824-521: The concrete protects the steel rebar from corrosion . Reinforcing schemes are generally designed to resist tensile stresses in particular regions of the concrete that might cause unacceptable cracking and/or structural failure. Modern reinforced concrete can contain varied reinforcing materials made of steel, polymers or alternate composite material in conjunction with rebar or not. Reinforced concrete may also be permanently stressed (concrete in compression, reinforcement in tension), so as to improve

1881-541: The concrete resists compression and reinforcement " rebar " resists tension can be made into almost any shape and size for the construction industry. Three physical characteristics give reinforced concrete its special properties: As a rule of thumb, only to give an idea on orders of magnitude, steel is protected at pH above ~11 but starts to corrode below ~10 depending on steel characteristics and local physico-chemical conditions when concrete becomes carbonated. Carbonation of concrete along with chloride ingress are amongst

1938-412: The concrete roof and floors in the two-story house he was constructing. His positioning of the reinforcement demonstrated that, unlike his predecessors, he had knowledge of tensile stresses. Between 1869 and 1870, Henry Eton would design, and Messrs W & T Phillips of London construct the wrought iron reinforced Homersfield Bridge bridge, with a 50' (15.25 meter) span, over the river Waveney, between

1995-416: The concrete, thus they can jointly resist external loads and deform. (2) The thermal expansion coefficients of concrete and steel are so close ( 1.0 × 10 to 1.5 × 10 for concrete and 1.2 × 10 for steel) that the thermal stress-induced damage to the bond between the two components can be prevented. (3) Concrete can protect the embedded steel from corrosion and high-temperature induced softening. Because

2052-470: The concrete, which occurs when compressive stresses exceed its strength, by yielding or failure of the rebar when bending or shear stresses exceed the strength of the reinforcement, or by bond failure between the concrete and the rebar. Carbonation, or neutralisation, is a chemical reaction between carbon dioxide in the air and calcium hydroxide and hydrated calcium silicate in the concrete. Santa Monica City Council Santa Monica City Council

2109-403: The cross-section of vertical reinforced concrete elements is inhomogeneous. The reinforcement in a RC structure, such as a steel bar, has to undergo the same strain or deformation as the surrounding concrete in order to prevent discontinuity, slip or separation of the two materials under load. Maintaining composite action requires transfer of load between the concrete and steel. The direct stress

2166-403: The examples of a non-linear numerical simulation and calculation visit the references: Prestressing concrete is a technique that greatly increases the load-bearing strength of concrete beams. The reinforcing steel in the bottom part of the beam, which will be subjected to tensile forces when in service, is placed in tension before the concrete is poured around it. Once the concrete has hardened,

2223-568: The first concrete buildings constructed in the United States was a private home designed by William Ward , completed in 1876. The home was particularly designed to be fireproof. G. A. Wayss was a German civil engineer and a pioneer of the iron and steel concrete construction. In 1879, Wayss bought the German rights to Monier's patents and, in 1884, his firm, Wayss & Freytag , made the first commercial use of reinforced concrete. Up until

2280-511: The first iron reinforced concrete structure, a four-story house at 72 rue Charles Michels in the suburbs of Paris. Coignet's descriptions of reinforcing concrete suggests that he did not do it for means of adding strength to the concrete but for keeping walls in monolithic construction from overturning. The, 1872–1873, Pippen building in Brooklyn stands as a testament to his technique. In 1854, English builder William B. Wilkinson reinforced

2337-660: The knowledge of reinforced concrete developed during the previous 50 years, Ransome improved nearly all the styles and techniques of the earlier inventors of reinforced concrete. Ransome's key innovation was to twist the reinforcing steel bar, thereby improving its bond with the concrete. Gaining increasing fame from his concrete constructed buildings, Ransome was able to build two of the first reinforced concrete bridges in North America. One of his bridges still stands on Shelter Island in New Yorks East End, One of

Santa Monica Civic Auditorium - Misplaced Pages Continue

2394-824: The light green color of its epoxy coating. Hot dip galvanized rebar may be bright or dull gray depending on length of exposure, and stainless rebar exhibits a typical white metallic sheen that is readily distinguishable from carbon steel reinforcing bar. Reference ASTM standard specifications A1035/A1035M Standard Specification for Deformed and Plain Low-carbon, Chromium, Steel Bars for Concrete Reinforcement, A767 Standard Specification for Hot Dip Galvanized Reinforcing Bars, A775 Standard Specification for Epoxy Coated Steel Reinforcing Bars and A955 Standard Specification for Deformed and Plain Stainless Bars for Concrete Reinforcement. Another, cheaper way of protecting rebars

2451-438: The microscopic rigid lattice, resulting in cracking and separation of the concrete. For this reason, typical non-reinforced concrete must be well supported to prevent the development of tension. If a material with high strength in tension, such as steel , is placed in concrete, then the composite material, reinforced concrete, resists not only compression but also bending and other direct tensile actions. A composite section where

2508-656: The most efficient floor system is key to creating optimal building structures. Small changes in the design of a floor system can have significant impact on material costs, construction schedule, ultimate strength, operating costs, occupancy levels and end use of a building. Without reinforcement, constructing modern structures with concrete material would not be possible. When reinforced concrete elements are used in construction, these reinforced concrete elements exhibit basic behavior when subjected to external loads . Reinforced concrete elements may be subject to tension , compression , bending , shear , and/or torsion . Concrete

2565-448: The passivation of steel at the anodic oxidation sites. Nitrite is a much more active corrosion inhibitor than nitrate , which is a less powerful oxidizer of the divalent iron. A beam bends under bending moment , resulting in a small curvature. At the outer face (tensile face) of the curvature the concrete experiences tensile stress, while at the inner face (compressive face) it experiences compressive stress. A singly reinforced beam

2622-433: The reinforced concrete element is subject to increasing bending moment, the tension steel yields while the concrete does not reach its ultimate failure condition. As the tension steel yields and stretches, an "under-reinforced" concrete also yields in a ductile manner, exhibiting a large deformation and warning before its ultimate failure. In this case the yield stress of the steel governs the design. An over-reinforced beam

2679-463: The show was recorded for radio broadcast, and several songs from the performance were finally made available as part of a box set in 2012, including the never-before released "Wings Of Mercury". On April 9, 1982, "Weird Al" Yankovic made his first major appearance at the auditorium, when his band opened for Missing Persons . It was not a happy experience; "I got pelted for 45 minutes", he later said, "(with) anything that wasn't nailed down". In 1986,

2736-462: The show's finale. On July 21, 1972, Carlin was arrested and charged with violating obscenity laws after performing the routine at Summerfest . The Eagles performed three consecutive shows during The Long Run Tour on July 27–29, 1980. The show was recorded and mostly featured on their live album, entitled Eagles Live . Blue Öyster Cult played in support of its Club Ninja album in March 1986;

2793-581: The size and location of cracks can be limited and controlled by appropriate reinforcement, control joints, curing methodology and concrete mix design. Cracking can allow moisture to penetrate and corrode the reinforcement. This is a serviceability failure in limit state design . Cracking is normally the result of an inadequate quantity of rebar, or rebar spaced at too great a distance. The concrete cracks either under excess loading, or due to internal effects such as early thermal shrinkage while it cures. Ultimate failure leading to collapse can be caused by crushing

2850-469: The stage adds 4,485 sq ft (416.7 m) more space, for a total of 16,260 sq ft (1,511 m). The East Wing meeting room adds an additional 4,200 sq ft (390 m), while the main lobby features 6,708 sq ft (623.2 m). The main hall of the Civic is adaptable for not only trade shows, but also sporting events, concerts , meetings, awards shows and other events. As

2907-474: The structure will receive warning of impending collapse. The characteristic strength is the strength of a material where less than 5% of the specimen shows lower strength. The design strength or nominal strength is the strength of a material, including a material-safety factor. The value of the safety factor generally ranges from 0.75 to 0.85 in Permissible stress design . The ultimate limit state

SECTION 50

#1732772059802

2964-454: The tension on the reinforcing steel is released, placing a built-in compressive force on the concrete. When loads are applied, the reinforcing steel takes on more stress and the compressive force in the concrete is reduced, but does not become a tensile force. Since the concrete is always under compression, it is less subject to cracking and failure. Reinforced concrete can fail due to inadequate strength, leading to mechanical failure, or due to

3021-575: The three elected Commissioners. The Commissioner of the Department of Public Safety was the ex officio Mayor; and the elections process included the use of a preferential ballot form. Mayor - Council form of government. Under the new charter, the City Council was composed of one Mayor with veto power, and one Council member from each of its seven wards. The residents of the town of Santa Monica voted to incorporate November 30, 1886, and chose

3078-403: The water mix before pouring concrete. Generally, 1–2 wt. % of [Ca(NO 2 ) 2 ] with respect to cement weight is needed to prevent corrosion of the rebars. The nitrite anion is a mild oxidizer that oxidizes the soluble and mobile ferrous ions (Fe ) present at the surface of the corroding steel and causes them to precipitate as an insoluble ferric hydroxide (Fe(OH) 3 ). This causes

3135-556: Was formally known as Belmar, the first African American community in Santa Monica. The land was secured through the use of eminent domain . The $ 2.9-million city-owned project soon became an acclaimed music venue, for artists as varied as David Bowie , Eric Clapton , Frank Sinatra , Village People , Mötley Crüe , Dave Brubeck , Laura Nyro , The Limeliters , Ella Fitzgerald , Elton John , Free , Traffic , Prince , Tim Buckley and Bob Dylan . On October 28 and 29, 1964,

3192-404: Was granted a patent for reinforcing concrete flowerpots by means of mixing a wire mesh and a mortar shell. In 1877, Monier was granted another patent for a more advanced technique of reinforcing concrete columns and girders, using iron rods placed in a grid pattern. Though Monier undoubtedly knew that reinforcing concrete would improve its inner cohesion, it is not clear whether he even knew how much

3249-422: Was strongly questioned by experts and recommendations for "pure" concrete construction were made, using reinforced concrete for the floors and walls as well as the frames. In April 1904, Julia Morgan , an American architect and engineer, who pioneered the aesthetic use of reinforced concrete, completed her first reinforced concrete structure, El Campanil, a 72-foot (22 m) bell tower at Mills College , which

#801198