Misplaced Pages

#676323

134-632: Power tools are used in industry, in construction , in renovation , in the garden, for housework tasks such as cooking , cleaning , and around the house for purposes of driving ( fasteners ), drilling , cutting , shaping, sanding , grinding , routing , polishing , painting, metal working , wood working , heating and more. Power tools are classified as either stationary or portable, where portable means hand-held. Portable power tools have obvious advantages in mobility. Stationary power tools, however, often have advantages in speed and precision. A typical table saw, for instance, not only cuts faster than

268-476: A designer , a contractor , a construction manager , or other advisors); such specialists are normally appointed for their expertise in project delivery and construction management and will help the owner define the project brief , agree on a budget and schedule , liaise with relevant public authorities, and procure materials and the services of other specialists (the supply chain , comprising subcontractors and materials suppliers). Contracts are agreed for

402-422: A "live" environment (where residents or businesses remain living in or operating on the site) requires particular care, planning and communication. When applicable, a proposed construction project must comply with local land-use planning policies including zoning and building code requirements. A project will normally be assessed (by the 'authority having jurisdiction', AHJ, typically the municipality where

536-400: A better way could be found to remove the seed. Eli Whitney responded to the challenge by inventing the inexpensive cotton gin . A man using a cotton gin could remove seed from as much upland cotton in one day as would previously have taken two months to process, working at the rate of one pound of cotton per day. These advances were capitalised on by entrepreneurs , of whom the best known

670-445: A building or other asset that affect safety, including its use, expansion, structural integrity, and fire protection , usually require municipality approval. Depending on the type of project, mortgage bankers , accountants , and cost engineers may participate in creating an overall plan for the financial management of a construction project. The presence of the mortgage banker is highly likely, even in relatively small projects since

804-640: A business to lead both design and construction ( design-build ); or they may directly appoint a designer, contractor and specialist subcontractors ( construction management ). Some forms of procurement emphasize collaborative relationships ( partnering , alliancing) between the client, the contractor, and other stakeholders within a construction project, seeking to ameliorate often highly competitive and adversarial industry practices. DfMA (design for manufacture and assembly) approaches also emphasize early collaboration with manufacturers and suppliers regarding products and components. Construction or refurbishment work in

938-479: A conceptual cost estimate performed by a building estimator . As portions of a project are completed, they may be sold, supplanting one lender or owner for another, while the logistical requirements of having the right trades and materials available for each stage of the building construction project carry forward. Public–private partnerships (PPPs) or private finance initiatives (PFIs) may also be used to help deliver major projects. According to McKinsey in 2019,

1072-520: A cottage industry under the putting-out system . Occasionally, the work was done in the workshop of a master weaver. Under the putting-out system, home-based workers produced under contract to merchant sellers, who often supplied the raw materials. In the off-season, the women, typically farmers' wives, did the spinning and the men did the weaving. Using the spinning wheel , it took anywhere from four to eight spinners to supply one handloom weaver. The flying shuttle , patented in 1733 by John Kay —with

1206-670: A groundswell of enterprise and productivity transformed the economy in the 17th century, laying the foundations for the world's first industrial economy. Britain was already a nation of makers by the year 1700" and "the history of Britain needs to be rewritten". Eric Hobsbawm held that the Industrial Revolution began in Britain in the 1780s and was not fully felt until the 1830s or 1840s, while T. S. Ashton held that it occurred roughly between 1760 and 1830. Rapid adoption of mechanized textiles spinning occurred in Britain in

1340-670: A long period of time can put a person at risk for hearing loss . The US National Institute for Occupational Safety and Health (NIOSH) has recommended that a person should not be exposed to noise at or above 85 dB , for the sake of hearing loss prevention. Most power tools, including drills , circular saws , belt sanders , and chainsaws , operate at sound levels above the 85 dB limit, some even reaching over 100 dB. NIOSH strongly recommends wearing hearing protection while using these kinds of power tools. Early Industrial Revolution -era factories had batteries of power tools driven by belts from overhead shafts. The prime power source

1474-425: A major turning point in history, comparable only to humanity's adoption of agriculture with respect to material advancement. The Industrial Revolution influenced in some way almost every aspect of daily life. In particular, average income and population began to exhibit unprecedented sustained growth. Some economists have said the most important effect of the Industrial Revolution was that the standard of living for

SECTION 10

#1732783009677

1608-421: A mechanised industry. Other inventors increased the efficiency of the individual steps of spinning (carding, twisting and spinning, and rolling) so that the supply of yarn increased greatly. Steam power was then applied to drive textile machinery. Manchester acquired the nickname Cottonopolis during the early 19th century owing to its sprawl of textile factories. Although mechanisation dramatically decreased

1742-726: A more even thickness. The technology was developed with the help of John Wyatt of Birmingham . Paul and Wyatt opened a mill in Birmingham which used their rolling machine powered by a donkey. In 1743, a factory opened in Northampton with 50 spindles on each of five of Paul and Wyatt's machines. This operated until about 1764. A similar mill was built by Daniel Bourn in Leominster , but this burnt down. Both Lewis Paul and Daniel Bourn patented carding machines in 1748. Based on two sets of rollers that travelled at different speeds, it

1876-609: A new group of innovations in what has been called the Second Industrial Revolution . These included new steel-making processes , mass production , assembly lines , electrical grid systems, the large-scale manufacture of machine tools, and the use of increasingly advanced machinery in steam-powered factories. The earliest recorded use of the term "Industrial Revolution" was in July 1799 by French envoy Louis-Guillaume Otto , announcing that France had entered

2010-406: A number of subsequent improvements including an important one in 1747—doubled the output of a weaver, worsening the imbalance between spinning and weaving. It became widely used around Lancashire after 1760 when John's son, Robert , invented the dropbox, which facilitated changing thread colors. Lewis Paul patented the roller spinning frame and the flyer-and- bobbin system for drawing wool to

2144-465: A regular hand saw, but the cuts are smoother, straighter, and more square than what is normally achievable with a hand-held power saw. Some stationary power tools can produce objects that cannot be made in any other way. Lathes , for example, produce truly round objects. Stationary power tools for metalworking are usually called machine tools . The term machine tool is not usually applied to stationary power tools for woodworking , although such usage

2278-410: A reverberatory furnace, coal or coke could be used as fuel. The puddling process continued to be used until the late 19th century when iron was being displaced by mild steel. Because puddling required human skill in sensing the iron globs, it was never successfully mechanised. Rolling was an important part of the puddling process because the grooved rollers expelled most of the molten slag and consolidated

2412-433: A rule is inapplicable (the bridge design will not cause a collapse), or that the custom is no longer needed (acceptance of live-work spaces has grown in the community). During the construction of a building, a municipal building inspector usually inspects the ongoing work periodically to ensure that construction adheres to the approved plans and the local building code. Once construction is complete, any later changes made to

2546-438: A simple, wooden framed machine that only cost about £6 for a 40-spindle model in 1792 and was used mainly by home spinners. The jenny produced a lightly twisted yarn only suitable for weft, not warp. The spinning frame or water frame was developed by Richard Arkwright who, along with two partners, patented it in 1769. The design was partly based on a spinning machine built by Kay, who was hired by Arkwright. For each spindle

2680-625: A variety of cotton cloth, some of exceptionally fine quality. Cotton was a difficult raw material for Europe to obtain before it was grown on colonial plantations in the Americas. The early Spanish explorers found Native Americans growing unknown species of excellent quality cotton: sea island cotton ( Gossypium barbadense ) and upland green seeded cotton Gossypium hirsutum . Sea island cotton grew in tropical areas and on barrier islands of Georgia and South Carolina but did poorly inland. Sea island cotton began being exported from Barbados in

2814-493: A weight. The weights kept the twist from backing up before the rollers. The bottom rollers were wood and metal, with fluting along the length. The water frame was able to produce a hard, medium-count thread suitable for warp, finally allowing 100% cotton cloth to be made in Britain. Arkwright and his partners used water power at a factory in Cromford , Derbyshire in 1771, giving the invention its name. Samuel Crompton invented

SECTION 20

#1732783009677

2948-430: Is Arkwright. He is credited with a list of inventions, but these were actually developed by such people as Kay and Thomas Highs ; Arkwright nurtured the inventors, patented the ideas, financed the initiatives, and protected the machines. He created the cotton mill which brought the production processes together in a factory, and he developed the use of power—first horsepower and then water power—which made cotton manufacture

3082-410: Is a verb : the act of building, and the noun is construction: how something is built or the nature of its structure. In its most widely used context, construction covers the processes involved in delivering buildings , infrastructure , industrial facilities, and associated activities through to the end of their life. It typically starts with planning , financing , and design that continues until

3216-446: Is a possibility of fuel or vapor ignition - such as automotive workshops. Professional level electric tools differ from DIY or 'consumer' tools by being double insulated and not earthed - in fact, they must not be earthed for safety reasons. Different battery powered power tools often use batteries which are not compatible across brands and models. This may cause vendor lock-in , and results in poor sustainability if and when either

3350-482: Is occasionally heard, and in some cases, such as drill presses and bench grinders , exactly the same tool is used for both woodworking and metalworking. While hand-held power tools are helpful, they also produce large amounts of noise , vibrations and particulates including ultrafine particles . Airborne particulate matter is a Group 1 carcinogen . Particulates are the most harmful form (other than ultra-fines ) of air pollution as they can penetrate deep into

3484-403: Is one of the leading risk factor for premature death globally. Many construction tasks create dust . High dust levels are caused by one of more the following: Examples of high dust level tasks include: Some industry standards on the size and amount of dust emitted by power tools exist, though it appears that they are not widely known or used globally. Knowing that dust is generated throughout

3618-413: Is the customary power source for nailers and paint sprayers. A few tools (called powder-actuated tools ) are powered by explosive cartridges. Tools that run on gasoline or gasoline-oil mixes are made for outdoor use; typical examples include most chainsaws and string trimmers . Other tools like blowtorches will burn their fuel externally to generate heat. Compressed air is universally used where there

3752-405: Is the discipline of safely and efficiently tearing down buildings and other artificial structures . Demolition contrasts with deconstruction , which involves taking a building apart while carefully preserving valuable elements for reuse purposes ( recycling – see also circular economy ). The output of the global construction industry was worth an estimated $ 10.8 trillion in 2017, and in 2018

3886-513: Is the most popular choice to power stationary tools. Other power sources include steam engines , direct burning of fuels and propellants, such as in powder-actuated tools , or even natural power sources such as wind or moving water . In the past, stationary tools were powered by windmills , water wheels, and steam. Some museums and hobbyists still maintain and operate stationary tools powered by these older power sources. Portable electric tools may be either corded or battery-powered. Compressed air

4020-937: Is the process of adding structures to areas of land, also known as real property sites. Typically, a project is instigated by or with the owner of the property (who may be an individual or an organisation); occasionally, land may be compulsorily purchased from the owner for public use. Residential construction may be undertaken by individual land-owners ( self-built ), by specialist housebuilders , by property developers , by general contractors , or by providers of public or social housing (e.g.: local authorities, housing associations ). Where local zoning or planning policies allow, mixed-use developments may comprise both residential and non-residential construction (e.g.: retail, leisure, offices, public buildings, etc.). Residential construction practices, technologies , and resources must conform to local building authority's regulations and codes of practice . Materials readily available in

4154-413: Is the second largest construction market with a 2018 output of $ 1.581 trillion. Construction is a major source of employment in most countries; high reliance on small businesses, and under-representation of women are common traits. For example: According to McKinsey research, productivity growth per worker in construction has lagged behind many other industries across different countries including in

Power tool - Misplaced Pages Continue

4288-593: The British Agricultural Revolution , to provide excess manpower and food; a pool of managerial and entrepreneurial skills; available ports, rivers, canals, and roads to cheaply move raw materials and outputs; natural resources such as coal, iron, and waterfalls; political stability and a legal system that supported business; and financial capital available to invest. Once industrialisation began in Great Britain, new factors can be added:

4422-562: The Bronze Age , a class of professional craftsmen , like bricklayers and carpenters , appeared. Occasionally, slaves were used for construction work. In the Middle Ages , the artisan craftsmen were organized into guilds . In the 19th century, steam-powered machinery appeared, and later, diesel- and electric-powered vehicles such as cranes , excavators and bulldozers . Fast-track construction has been increasingly popular in

4556-639: The East India Company . The development of trade and the rise of business were among the major causes of the Industrial Revolution. Developments in law also facilitated the revolution, such as courts ruling in favour of property rights . An entrepreneurial spirit and consumer revolution helped drive industrialisation in Britain, which after 1800, was emulated in Belgium, the United States, and France. The Industrial Revolution marked

4690-810: The First Industrial Revolution and Second Industrial Revolution , was a period of global transition of the human economy towards more widespread, efficient and stable manufacturing processes that succeeded the Agricultural Revolution . Beginning in Great Britain , the Industrial Revolution spread to continental Europe and the United States , from around 1760 to about 1820–1840. This transition included going from hand production methods to machines ; new chemical manufacturing and iron production processes;

4824-481: The United States and in European countries. In the United States, construction productivity per worker has declined by half since the 1960s. The twenty-five largest countries in the world by construction GVA (2018) Some workers may be engaged in manual labour as unskilled or semi-skilled workers; they may be skilled tradespeople; or they may be supervisory or managerial personnel. Under safety legislation in

4958-474: The architect , engineer or builder acts for the client as the project coordinator. They design the works, prepare specifications and design deliverables (models, drawings, etc.), administer the contract, tender the works, and manage the works from inception to completion. In parallel, there are direct contractual links between the client and the main contractor, who, in turn, has direct contractual relationships with subcontractors. The arrangement continues until

5092-488: The spinning mule in 1779, so called because it is a hybrid of Arkwright's water frame and James Hargreaves 's spinning jenny in the same way that a mule is the product of crossbreeding a female horse with a male donkey . Crompton's mule was able to produce finer thread than hand spinning and at a lower cost. Mule-spun thread was of suitable strength to be used as a warp and finally allowed Britain to produce highly competitive yarn in large quantities. Realising that

5226-582: The technological and architectural innovations were of British origin. By the mid-18th century, Britain was the world's leading commercial nation, controlling a global trading empire with colonies in North America and the Caribbean. Britain had major military and political hegemony on the Indian subcontinent ; particularly with the proto-industrialised Mughal Bengal , through the activities of

5360-414: The type of building , non-residential building construction can be procured by a wide range of private and public organisations, including local authorities, educational and religious bodies, transport undertakings, retailers, hoteliers, property developers, financial institutions and other private companies. Most construction in these sectors is undertaken by general contractors . Civil engineering covers

5494-581: The "vast majority of large construction projects go over budget and take 20% longer than expected". A construction project is a complex net of construction contracts and other legal obligations, each of which all parties must carefully consider. A contract is the exchange of a set of obligations between two or more parties, and provides structures to manage issues. For example, construction delays can be costly, so construction contracts set out clear expectations and clear paths to manage delays. Poorly drafted contracts can lead to confusion and costly disputes. At

Power tool - Misplaced Pages Continue

5628-441: The 1650s. Upland green seeded cotton grew well on inland areas of the southern U.S. but was not economical because of the difficulty of removing seed, a problem solved by the cotton gin . A strain of cotton seed brought from Mexico to Natchez, Mississippi , in 1806 became the parent genetic material for over 90% of world cotton production today; it produced bolls that were three to four times faster to pick. The Age of Discovery

5762-453: The 1780s, and high rates of growth in steam power and iron production occurred after 1800. Mechanised textile production spread from Great Britain to continental Europe and the United States in the early 19th century, with important centres of textiles, iron and coal emerging in Belgium and the United States and later textiles in France. An economic recession occurred from the late 1830s to

5896-461: The 21st century. Some estimates suggest that 40% of construction projects are now fast-track construction. Broadly, there are three sectors of construction: buildings, infrastructure and industrial: The industry can also be classified into sectors or markets. For example, Engineering News-Record ( ENR ), a US-based construction trade magazine, has compiled and reported data about the size of design and construction contractors. In 2014, it split

6030-447: The 21st-century introduction of building information modeling (BIM) processes has involved the use of computer-generated models that can be used in their own right or to generate drawings and other visualisations as well as capturing non-geometric data about building components and systems. On some projects, work on-site will not start until design work is largely complete; on others, some design work may be undertaken concurrently with

6164-496: The Indian industry. Bar iron was the commodity form of iron used as the raw material for making hardware goods such as nails, wire, hinges, horseshoes, wagon tires, chains, etc., as well as structural shapes. A small amount of bar iron was converted into steel. Cast iron was used for pots, stoves, and other items where its brittleness was tolerable. Most cast iron was refined and converted to bar iron, with substantial losses. Bar iron

6298-480: The Industrial Revolution, thus causing the Great Divergence . Some historians, such as John Clapham and Nicholas Crafts , have argued that the economic and social changes occurred gradually and that the term revolution is a misnomer. This is still a subject of debate among some historians. Six factors facilitated industrialisation: high levels of agricultural productivity, such as that reflected in

6432-577: The Scottish inventor James Beaumont Neilson in 1828, was the most important development of the 19th century for saving energy in making pig iron. By using preheated combustion air, the amount of fuel to make a unit of pig iron was reduced at first by between one-third using coke or two-thirds using coal; the efficiency gains continued as the technology improved. Hot blast also raised the operating temperature of furnaces, increasing their capacity. Using less coal or coke meant introducing fewer impurities into

6566-599: The United Kingdom, for example, construction workers are defined as people "who work for or under the control of a contractor on a construction site"; in Canada, this can include people whose work includes ensuring conformance with building codes and regulations, and those who supervise other workers. Laborers comprise a large grouping in most national construction industries. In the United States, for example, in May 2021

6700-556: The Western European models in the late 19th century. The commencement of the Industrial Revolution is closely linked to a small number of innovations, beginning in the second half of the 18th century. By the 1830s, the following gains had been made in important technologies: In 1750, Britain imported 2.5 million pounds of raw cotton, most of which was spun and woven by the cottage industry in Lancashire . The work

6834-455: The ability to deliver a higher current. Even when using the same battery technology, voltage rating and amp hour rating, the interface of batteries for power tools are often not compatible across different manufacturers, and sometimes also not even within the same brand or product line. There are examples of aftermarket adapters being made so that the user can mix and match batteries between well-known brands, but these often do not fully implement

SECTION 50

#1732783009677

6968-413: The area generally dictate the construction materials used (e.g.: brick versus stone versus timber ). Costs of construction on a per square meter (or per square foot) basis for houses can vary dramatically based on site conditions, access routes, local regulations, economies of scale (custom-designed homes are often more expensive to build) and the availability of skilled tradespeople. Depending upon

7102-554: The asset as an advanced technological system requiring close integration of many sub-systems and their individual components, including sustainability. For buildings, building engineering is an emerging discipline that attempts to meet this new challenge. Traditionally, design has involved the production of sketches , architectural and engineering drawings , and specifications . Until the late 20th century, drawings were largely hand- drafted ; adoption of computer-aided design (CAD) technologies then improved design productivity, while

7236-415: The asset is built and ready for use. Construction also covers repairs and maintenance work, any works to expand, extend and improve the asset, and its eventual demolition , dismantling or decommissioning . The construction industry contributes significantly to many countries' gross domestic products ( GDP ). Global expenditure on construction activities was about $ 4 trillion in 2012. In 2022, expenditure on

7370-400: The battery, charger, or power tool component fails, resulting in potentially all having to be replaced. Examples of battery differences include the battery technologies themselves, with nickel-metal hydride (NiMH) and nickel–cadmium batteries (Ni-Cd) being common previously, but as of 2021 lithium-ion batteries have become the de facto standard for new power tools. The voltage is one of

7504-563: The brand name from Electrolux , the AEG owner. The incomplete list lists the brand first, then its manufacturer or owner. Construction This is an accepted version of this page Construction is a general term meaning the art and science of forming objects , systems , or organizations . It comes from the Latin word constructio (from com- "together" and struere "to pile up") and Old French construction . To 'construct'

7638-419: The budget on the job, and a construction manager , design engineer , construction engineer or architect supervises it. Those involved with the design and execution must consider zoning requirements and legal issues, environmental impact of the project, scheduling , budgeting and bidding , construction site safety , availability and transportation of building materials , logistics, and inconvenience to

7772-447: The client enters into separate contracts with the designer (architect or engineer), a construction manager , and individual trade contractors . The client takes on the contractual role, while the construction or project manager provides the active role of managing the separate trade contracts, and ensuring that they complete all work smoothly and effectively together. This approach is often used to speed up procurement processes, to allow

7906-410: The client greater flexibility in design variation throughout the contract, to enable the appointment of individual work contractors, to separate contractual responsibility on each individual throughout the contract, and to provide greater client control. In the industrialized world, construction usually involves the translation of designs into reality. Most commonly (i.e.: in a design-bid-build project),

8040-471: The coal do not migrate into the metal. This technology was applied to lead from 1678 and to copper from 1687. It was also applied to iron foundry work in the 1690s, but in this case the reverberatory furnace was known as an air furnace. (The foundry cupola is a different, and later, innovation.) Coke pig iron was hardly used to produce wrought iron until 1755–56, when Darby's son Abraham Darby II built furnaces at Horsehay and Ketley where low sulfur coal

8174-409: The coke pig iron he made was not suitable for making wrought iron and was used mostly for the production of cast iron goods, such as pots and kettles. He had the advantage over his rivals in that his pots, cast by his patented process, were thinner and cheaper than theirs. In 1750, coke had generally replaced charcoal in the smelting of copper and lead and was in widespread use in glass production. In

SECTION 60

#1732783009677

8308-467: The column of materials (iron ore, fuel, slag) flowing down the blast furnace more porous and did not crush in the much taller furnaces of the late 19th century. As cast iron became cheaper and widely available, it began being a structural material for bridges and buildings. A famous early example is the Iron Bridge built in 1778 with cast iron produced by Abraham Darby III. However, most cast iron

8442-600: The company was auctioned off to A. F. Siebert, a former partner in the Peterson Company, in 1924 and became the Milwaukee Electric Tool Company . In the early 1930s, companies started to experiment with housings of thermoset polymer plastics. In 1956, under the influence of Hans Erich Slany , Robert Bosch GmbH was one of the first companies to introduce a power tool housing made of glass filled nylon. As of 2021, an electric motor

8576-533: The construction industry exceeded $ 11 trillion a year, equivalent to about 13 percent of global GDP . This spending was forecasted to rise to around $ 14.8 trillion in 2030. The construction industry promotes economic development and brings many non-monetary benefits to many countries, but it is one of the most hazardous industries. For example, about 20% (1,061) of US industry fatalities in 2019 happened in construction. The first huts and shelters were constructed by hand or with simple tools. As cities grew during

8710-499: The construction process and can cause serious health hazards, manufacturers are now marketing power tools that are equipped with dust collection system (e.g. HEPA vacuum cleaner) or integrated water delivery system which extract the dust after emission. However, the use of such products is still not common in most places. As Q1 2024 petrol powered tools are banned in California. Using power tools without hearing protection over

8844-675: The construction sector employed just over 7.5 million people, of whom just over 820,000 were laborers, while 573,000 were carpenters , 508,000 were electricians , 258,000 were equipment operators and 230,000 were construction managers. Like most business sectors, there is also substantial white-collar employment in construction – 681,000 US workers were recorded by the United States Department of Labor as in 'office and administrative support occupations' in May 2021. Large-scale construction requires collaboration across multiple disciplines. A project manager normally manages

8978-495: The cost of cotton cloth, by the mid-19th century machine-woven cloth still could not equal the quality of hand-woven Indian cloth, in part because of the fineness of thread made possible by the type of cotton used in India, which allowed high thread counts. However, the high productivity of British textile manufacturing allowed coarser grades of British cloth to undersell hand-spun and woven fabric in low-wage India, eventually destroying

9112-542: The cotton textile industry in Britain was 2.6% in 1760, 17% in 1801, and 22.4% in 1831. Value added by the British woollen industry was 14.1% in 1801. Cotton factories in Britain numbered approximately 900 in 1797. In 1760, approximately one-third of cotton cloth manufactured in Britain was exported, rising to two-thirds by 1800. In 1781, cotton spun amounted to 5.1 million pounds, which increased to 56 million pounds by 1800. In 1800, less than 0.1% of world cotton cloth

9246-427: The country. Steam engines made the use of higher-pressure and volume blast practical; however, the leather used in bellows was expensive to replace. In 1757, ironmaster John Wilkinson patented a hydraulic powered blowing engine for blast furnaces. The blowing cylinder for blast furnaces was introduced in 1760 and the first blowing cylinder made of cast iron is believed to be the one used at Carrington in 1768 that

9380-750: The data into nine market segments: transportation, petroleum , buildings, power, industrial, water, manufacturing, sewage/waste, telecom , hazardous waste , and a tenth category for other projects. ENR used data on transportation, sewage, hazardous waste and water to rank firms as heavy contractors. The Standard Industrial Classification and the newer North American Industry Classification System classify companies that perform or engage in construction into three subsectors: building construction, heavy and civil engineering construction, and specialty trade contractors. There are also categories for professional services firms (e.g., engineering , architecture , surveying , project management ). Building construction

9514-426: The delivery of services by all businesses, alongside other detailed plans aimed at ensuring legal, timely, on-budget and safe delivery of the specified works. Design, finance, and legal aspects overlap and interrelate. The design must be not only structurally sound and appropriate for the use and location, but must also be financially possible to build, and legal to use. The financial structure must be adequate to build

9648-440: The design provided and must pay amounts that are legally owed. Legal structures integrate design with other activities and enforce financial and other construction processes. These processes also affect procurement strategies. Clients may, for example, appoint a business to design the project, after which a competitive process is undertaken to appoint a lead contractor to construct the asset ( design–bid–build ); they may appoint

9782-451: The design team is employed by (i.e. in contract with) the property owner. Depending upon the type of project, a design team may include architects , civil engineers , mechanical engineers , electrical engineers , structural engineers , fire protection engineers , planning consultants , architectural consultants, and archaeological consultants. A 'lead designer' will normally be identified to help coordinate different disciplinary inputs to

9916-821: The design, construction, and maintenance of the physical and naturally built environment , including public works such as roads, bridges, canals, dams, tunnels, airports, water and sewerage systems, pipelines, and railways. Some general contractors have expertise in civil engineering; civil engineering contractors are firms dedicated to work in this sector, and may specialise in particular types of infrastructure. Industrial construction includes offshore construction (mainly of energy installations: oil and gas platforms , wind power ), mining and quarrying , refineries , breweries , distilleries and other processing plants, power stations , steel mills , warehouses and factories . Some construction projects are small renovations or repair jobs, like repainting or fixing leaks, where

10050-443: The desire to prevent indisputably bad phenomena, e.g. explosions or bridge collapses. Other legal requirements come from malum prohibitum considerations, or factors that are a matter of custom or expectation, such as isolating businesses from a business district or residences from a residential district. An attorney may seek changes or exemptions in the law that governs the land where the building will be built, either by arguing that

10184-456: The eagerness of British entrepreneurs to export industrial expertise and the willingness to import the process. Britain met the criteria and industrialized starting in the 18th century, and then it exported the process to western Europe (especially Belgium, France, and the German states) in the early 19th century. The United States copied the British model in the early 19th century, and Japan copied

10318-543: The early 1840s when the adoption of the Industrial Revolution's early innovations, such as mechanised spinning and weaving, slowed as their markets matured; and despite the increasing adoption of locomotives, steamboats and steamships, and hot blast iron smelting . New technologies such as the electrical telegraph , widely introduced in the 1840s and 1850s in the United Kingdom and the United States, were not powerful enough to drive high rates of economic growth. Rapid economic growth began to reoccur after 1870, springing from

10452-535: The early stages of on-site activity (for example, work on a building's foundations may commence while designers are still working on the detailed designs of the building's internal spaces). Some projects may include elements that are designed for off-site construction (see also prefabrication and modular building ) and are then delivered to the site ready for erection, installation or assembly. Once contractors and other relevant professionals have been appointed and designs are sufficiently advanced, work may commence on

10586-465: The expiration of the Arkwright patent would greatly increase the supply of spun cotton and lead to a shortage of weavers, Edmund Cartwright developed a vertical power loom which he patented in 1785. In 1776, he patented a two-man operated loom. Cartwright's loom design had several flaws, the most serious being thread breakage. Samuel Horrocks patented a fairly successful loom in 1813. Horock's loom

10720-412: The first feature of the permanent structure has been put in place, such as pile driving, or the pouring of slabs or footings. Commissioning is the process of verifying that all subsystems of a new building (or other assets) work as intended to achieve the owner's project requirements and as designed by the project's architects and engineers. A period after handover (or practical completion) during which

10854-528: The first highly mechanised factory was John Lombe 's water-powered silk mill at Derby , operational by 1721. Lombe learned silk thread manufacturing by taking a job in Italy and acting as an industrial spy; however, because the Italian silk industry guarded its secrets closely, the state of the industry at that time is unknown. Although Lombe's factory was technically successful, the supply of raw silk from Italy

10988-400: The first successful cylinder for a Boulton and Watt steam engine in 1776, he was given an exclusive contract for providing cylinders. After Watt developed a rotary steam engine in 1782, they were widely applied to blowing, hammering, rolling and slitting. The solutions to the sulfur problem were the addition of sufficient limestone to the furnace to force sulfur into the slag as well as

11122-534: The general population in the Western world began to increase consistently for the first time in history, although others have said that it did not begin to improve meaningfully until the late 19th and 20th centuries. GDP per capita was broadly stable before the Industrial Revolution and the emergence of the modern capitalist economy, while the Industrial Revolution began an era of per-capita economic growth in capitalist economies. Economic historians agree that

11256-451: The increasing use of water power and steam power ; the development of machine tools ; and the rise of the mechanised factory system . Output greatly increased, and the result was an unprecedented rise in population and the rate of population growth . The textile industry was the first to use modern production methods, and textiles became the dominant industry in terms of employment, value of output, and capital invested. Many of

11390-517: The iron industries during the Industrial Revolution was the replacement of wood and other bio-fuels with coal ; for a given amount of heat, mining coal required much less labour than cutting wood and converting it to charcoal , and coal was much more abundant than wood, supplies of which were becoming scarce before the enormous increase in iron production that took place in the late 18th century. In 1709, Abraham Darby made progress using coke to fuel his blast furnaces at Coalbrookdale . However,

11524-496: The late 19th century, and his expression did not enter everyday language until then. Credit for popularising the term may be given to Arnold Toynbee , whose 1881 lectures gave a detailed account of the term. Economic historians and authors such as Mendels, Pomeranz , and Kridte argue that proto-industrialisation in parts of Europe, the Muslim world , Mughal India , and China created the social and economic conditions that led to

11658-533: The lungs and brain from blood streams, causing health problems such as heart disease , lung disease , and premature death . There is no safe level of particulates. A 2013 study concluded that "particulate matter air pollution contributes to lung cancer incidence in Europe". Worldwide, exposure to PM 2.5 contributed to 4.1 million deaths from heart disease, stroke, lung cancer, chronic lung disease, and respiratory infections in 2016. Overall, ambient particulate matter

11792-467: The mass of hot wrought iron. Rolling was 15 times faster at this than a trip hammer . A different use of rolling, which was done at lower temperatures than that for expelling slag, was in the production of iron sheets, and later structural shapes such as beams, angles, and rails. The puddling process was improved in 1818 by Baldwyn Rogers, who replaced some of the sand lining on the reverberatory furnace bottom with iron oxide . In 1838 John Hall patented

11926-429: The most important factors for battery compatibility. In simple terms, a higher voltage rating on the tool often means that the power tool can deliver more power, with all else being equal. Using a battery with the wrong voltage rating may damage the tool, persons, or surroundings. As of 2021, 18 volt battery packs are the de facto standard in new power tools. The ampere hour , in simple terms, tells something about how long

12060-599: The number of cotton goods consumed in Western Europe was minor until the early 19th century. By 1600, Flemish refugees began weaving cotton cloth in English towns where cottage spinning and weaving of wool and linen was well established. They were left alone by the guilds who did not consider cotton a threat. Earlier European attempts at cotton spinning and weaving were in 12th-century Italy and 15th-century southern Germany, but these industries eventually ended when

12194-418: The onset of the Industrial Revolution is the most important event in human history since the domestication of animals and plants. The precise start and end of the Industrial Revolution is still debated among historians, as is the pace of economic and social changes . According to Cambridge historian Leigh Shaw-Taylor, Britain was already industrialising in the 17th century, and "Our database shows that

12328-486: The overall budget is adequate, presenting a temporary issue. Cost overruns with government projects have occurred when the contractor identified change orders or project changes that increased costs, which are not subject to competition from other firms as they have already been eliminated from consideration after the initial bid. Fraud is also an issue of growing significance within construction. Large projects can involve highly complex financial plans and often start with

12462-441: The overall design. This may be aided by integration of previously separate disciplines (often undertaken by separate firms) into multi-disciplinary firms with experts from all related fields, or by firms establishing relationships to support design-build processes. The increasing complexity of construction projects creates the need for design professionals trained in all phases of a project's life-cycle and develop an appreciation of

12596-409: The owner may act as designer, paymaster and laborer for the entire project. However, more complex or ambitious projects usually require additional multi-disciplinary expertise and manpower, so the owner may commission one or more specialist businesses to undertake detailed planning, design, construction and handover of the work. Often the owner will appoint one business to oversee the project (this may be

12730-405: The owner may identify any shortcomings in relation to the building specification ('defects'), with a view to the contractor correcting the defect. Maintenance involves functional checks, servicing, repairing or replacing of necessary devices, equipment, machinery , building infrastructure, and supporting utilities in industrial, business, governmental, and residential installations. Demolition

12864-478: The owner's equity in the property is the most obvious source of funding for a building project. Accountants act to study the expected monetary flow over the life of the project and to monitor the payouts throughout the process. Professionals including cost engineers, estimators and quantity surveyors apply expertise to relate the work and materials involved to a proper valuation. Financial planning ensures adequate safeguards and contingency plans are in place before

12998-412: The power tool can operate before it needs to be recharged. If comparing two batteries with the same battery technology and same voltage rating, a battery with twice the amp hour rating should last about twice as long. In practice there may however be some variations to this. Also, batteries with a higher amp hour rating in practice can also often let the power tool deliver a slightly higher peak power due to

13132-414: The project brief and then selects a preferred supplier. Often this will be a consortium involving a design firm and a contractor (sometimes more than one of each). In the United States, departments of transportation usually use design-build contracts as a way of progressing projects where states lack the skills or resources, particularly for very large projects. In a construction management arrangement,

13266-435: The project is ready for handover. Design-build became more common from the late 20th century, and involves the client contracting a single entity to provide design and construction. In some cases, the design-build package can also include finding the site, arranging funding and applying for all necessary statutory consents. Typically, the client invites several Design & Build (D&B) contractors to submit proposals to meet

13400-405: The project is started, and ensures that the plan is properly executed over the life of the project. Construction projects can suffer from preventable financial problems. Underbids happen when builders ask for too little money to complete the project. Cash flow problems exist when the present amount of funding cannot cover the current costs for labour and materials; such problems may arise even when

13534-528: The project site. Typically, a construction site will include a secure perimeter to restrict unauthorised access, site access control points, office and welfare accommodation for personnel from the main contractor and other firms involved in the project team, and storage areas for materials, machinery and equipment. According to the McGraw-Hill Dictionary of Architecture and Construction's definition, construction may be said to have started when

13668-745: The project will be located) for its potential impacts on neighbouring properties, and upon existing infrastructure (transportation, social infrastructure, and utilities including water supply, sewerage, electricity, telecommunications, etc.). Data may be gathered through site analysis , site surveys and geotechnical investigations . Construction normally cannot start until planning permission has been granted, and may require preparatory work to ensure relevant infrastructure has been upgraded before building work can commence. Preparatory works will also include surveys of existing utility lines to avoid damage-causing outages and other hazardous situations. Some legal requirements come from malum in se considerations, or

13802-642: The public, including those caused by construction delays . Some models and policy-making organisations promote the engagement of local labour in construction projects as a means of tackling social exclusion and addressing skill shortages. In the UK, the Joseph Rowntree Foundation reported in 2000 on 25 projects which had aimed to offer training and employment opportunities for locally based school leavers and unemployed people. The Foundation published "a good practice resource book" in this regard at

13936-501: The race to industrialise. In his 1976 book Keywords: A Vocabulary of Culture and Society , Raymond Williams states in the entry for "Industry": "The idea of a new social order based on major industrial change was clear in Southey and Owen , between 1811 and 1818, and was implicit as early as Blake in the early 1790s and Wordsworth at the turn of the [19th] century." The term Industrial Revolution applied to technological change

14070-662: The same time. Use of local labour and local materials were specified for the construction of the Danish Storebaelt bridge , but there were legal issues which were challenged in court and addressed by the European Court of Justice in 1993. The court held that a contract condition requiring use of local labour and local materials was incompatible with EU treaty principles . Later UK guidance noted that social and employment clauses, where used, must be compatible with relevant EU regulation. Employment of local labour

14204-418: The slag from almost 50% to around 8%. Puddling became widely used after 1800. Up to that time, British iron manufacturers had used considerable amounts of iron imported from Sweden and Russia to supplement domestic supplies. Because of the increased British production, imports began to decline in 1785, and by the 1790s Britain eliminated imports and became a net exporter of bar iron. Hot blast , patented by

14338-457: The smelting and refining of iron, coal and coke produced inferior iron to that made with charcoal because of the coal's sulfur content. Low sulfur coals were known, but they still contained harmful amounts. Conversion of coal to coke only slightly reduces the sulfur content. A minority of coals are coking. Another factor limiting the iron industry before the Industrial Revolution was the scarcity of water power to power blast bellows. This limitation

14472-473: The start of a project, legal advisors seek to identify ambiguities and other potential sources of trouble in the contract structures, and to present options for preventing problems. During projects, they work to avoid and resolve conflicts that arise. In each case, the lawyer facilitates an exchange of obligations that matches the reality of the project. Design-bid-build is the most common and well-established method of construction procurement. In this arrangement,

14606-528: The supply of cotton was cut off. The Moors in Spain grew, spun, and wove cotton beginning around the 10th century. British cloth could not compete with Indian cloth because India's labour cost was approximately one-fifth to one-sixth that of Britain's. In 1700 and 1721, the British government passed Calico Acts to protect the domestic woollen and linen industries from the increasing amounts of cotton fabric imported from India. The demand for heavier fabric

14740-862: The tools battery safety and monitoring systems and the use is done at the user's own risk. There are initiatives with the goal that the same battery can be used across products from several manufacturers, mostly those who offer special tools rather than general ones. Mainly two German companies have opened their 18V systems for others: Power tools include: Brand under license from Electrolux . [REDACTED]   United States [REDACTED]   United States [REDACTED]   China [REDACTED]   China A number of companies, some of which are comparatively small and specialized, build niche solutions for industry and trade. [REDACTED]   Japan [REDACTED]   Germany [REDACTED]   China With purchases from other manufacturers and OEM production and licensed

14874-415: The use of low sulfur coal. The use of lime or limestone required higher furnace temperatures to form a free-flowing slag. The increased furnace temperature made possible by improved blowing also increased the capacity of blast furnaces and allowed for increased furnace height. In addition to lower cost and greater availability, coke had other important advantages over charcoal in that it was harder and made

15008-406: The use of roasted tap cinder ( iron silicate ) for the furnace bottom, greatly reducing the loss of iron through increased slag caused by a sand lined bottom. The tap cinder also tied up some phosphorus, but this was not understood at the time. Hall's process also used iron scale or rust which reacted with carbon in the molten iron. Hall's process, called wet puddling , reduced losses of iron with

15142-468: The user. As Henry Ford adapted to the manufacturing needs of World War II , he requested that A. H. Peterson, a tool manufacturer, create a lighter electric drill that was more portable for his assembly line workers. At this point, the Hole-Shooter, a drill that weighed 5 lbs. was created by A. H. Peterson. The Peterson Company eventually went bankrupt after a devastating fire and recession , but

15276-410: The water frame used a series of four pairs of rollers, each operating at a successively higher rotating speed, to draw out the fibre which was then twisted by the spindle. The roller spacing was slightly longer than the fibre length. Too close a spacing caused the fibres to break while too distant a spacing caused uneven thread. The top rollers were leather-covered and loading on the rollers was applied by

15410-457: Was 7,800 tons and coke cast iron was 250,000 tons. In 1750, the UK imported 31,200 tons of bar iron and either refined from cast iron or directly produced 18,800 tons of bar iron using charcoal and 100 tons using coke. In 1796, the UK was making 125,000 tons of bar iron with coke and 6,400 tons with charcoal; imports were 38,000 tons and exports were 24,600 tons. In 1806 the UK did not import bar iron but exported 31,500 tons. A major change in

15544-508: Was a water wheel or (later) a steam engine. The introduction of the electric motor (and electric distribution networks) in the 1880s made possible the self-powered stationary and portable tools we know today. The global market for power tools is $ 33 billion (in 2016) and estimated to reach $ 46 billion in 2025. Prior to the 1930s, power tools were often housed in cast metal housings. The cast metal housings were heavy, contributing to repetitive use injuries, as well as conductive - often shocking

15678-407: Was a means of decarburizing molten pig iron by slow oxidation in a reverberatory furnace by manually stirring it with a long rod. The decarburized iron, having a higher melting point than cast iron, was raked into globs by the puddler. When the glob was large enough, the puddler would remove it. Puddling was backbreaking and extremely hot work. Few puddlers lived to be 40. Because puddling was done in

15812-606: Was available (and not far from Coalbrookdale). These furnaces were equipped with water-powered bellows, the water being pumped by Newcomen steam engines . The Newcomen engines were not attached directly to the blowing cylinders because the engines alone could not produce a steady air blast. Abraham Darby III installed similar steam-pumped, water-powered blowing cylinders at the Dale Company when he took control in 1768. The Dale Company used several Newcomen engines to drain its mines and made parts for engines which it sold throughout

15946-663: Was becoming more common by the late 1830s, as in Jérôme-Adolphe Blanqui 's description in 1837 of la révolution industrielle . Friedrich Engels in The Condition of the Working Class in England in 1844 spoke of "an industrial revolution, a revolution which at the same time changed the whole of civil society". Although Engels wrote his book in the 1840s, it was not translated into English until

16080-414: Was converted to wrought iron. Conversion of cast iron had long been done in a finery forge . An improved refining process known as potting and stamping was developed, but this was superseded by Henry Cort 's puddling process. Cort developed two significant iron manufacturing processes: rolling in 1783 and puddling in 1784. Puddling produced a structural grade iron at a relatively low cost. Puddling

16214-566: Was cut off to eliminate competition. In order to promote manufacturing, the Crown paid for models of Lombe's machinery which were exhibited in the Tower of London . Parts of India, China, Central America, South America, and the Middle East have a long history of hand manufacturing cotton textiles, which became a major industry sometime after 1000 AD. In tropical and subtropical regions where it

16348-403: Was designed by John Smeaton . Cast iron cylinders for use with a piston were difficult to manufacture; the cylinders had to be free of holes and had to be machined smooth and straight to remove any warping. James Watt had great difficulty trying to have a cylinder made for his first steam engine. In 1774 Wilkinson invented a precision boring machine for boring cylinders. After Wilkinson bored

16482-559: Was done by hand in workers' homes or occasionally in master weavers' shops. Wages in Lancashire were about six times those in India in 1770 when overall productivity in Britain was about three times higher than in India. In 1787, raw cotton consumption was 22 million pounds, most of which was cleaned, carded, and spun on machines. The British textile industry used 52 million pounds of cotton in 1800, which increased to 588 million pounds in 1850. The share of value added by

16616-544: Was followed by a period of colonialism beginning around the 16th century. Following the discovery of a trade route to India around southern Africa by the Portuguese, the British founded the East India Company , along with smaller companies of different nationalities which established trading posts and employed agents to engage in trade throughout the Indian Ocean region. One of the largest segments of this trade

16750-455: Was forecast to rise to $ 12.9 trillion by 2022, and to around $ 14.8 trillion in 2030. As a sector, construction accounts for more than 10% of global GDP (in developed countries , construction comprises 6–9% of GDP), and employs around 7% of the total employed workforce around the globe (accounting for over 273 million full- and part-time jobs in 2014). Since 2010, China has been the world's largest single construction market. The United States

16884-569: Was grown, most was grown by small farmers alongside their food crops and was spun and woven in households, largely for domestic consumption. In the 15th century, China began to require households to pay part of their taxes in cotton cloth. By the 17th century, almost all Chinese wore cotton clothing. Almost everywhere cotton cloth could be used as a medium of exchange . In India, a significant amount of cotton textiles were manufactured for distant markets, often produced by professional weavers. Some merchants also owned small weaving workshops. India produced

17018-628: Was identified as one of several social issues which could potentially be incorporated in a sustainable procurement approach, although the interdepartmental Sustainable Procurement Group recognised that "there is far less scope to incorporate [such] social issues in public procurement than is the case with environmental issues". There are many routes to the different careers within the construction industry. There are three main tiers of construction workers based on educational background and training, which vary by country: Industrial Revolution The Industrial Revolution , sometimes divided into

17152-479: Was improved by Richard Roberts in 1822, and these were produced in large numbers by Roberts, Hill & Co. Roberts was additionally a maker of high-quality machine tools and a pioneer in the use of jigs and gauges for precision workshop measurement. The demand for cotton presented an opportunity to planters in the Southern United States, who thought upland cotton would be a profitable crop if

17286-660: Was in cotton textiles, which were purchased in India and sold in Southeast Asia , including the Indonesian archipelago where spices were purchased for sale to Southeast Asia and Europe. By the mid-1760s, cloth was over three-quarters of the East India Company's exports. Indian textiles were in demand in the North Atlantic region of Europe where previously only wool and linen were available; however,

17420-400: Was later used in the first cotton spinning mill . In 1764, in the village of Stanhill, Lancashire, James Hargreaves invented the spinning jenny , which he patented in 1770. It was the first practical spinning frame with multiple spindles. The jenny worked in a similar manner to the spinning wheel, by first clamping down on the fibres, then by drawing them out, followed by twisting. It was

17554-437: Was made by the bloomery process, which was the predominant iron smelting process until the late 18th century. In the UK in 1720, there were 20,500 tons of cast iron produced with charcoal and 400 tons with coke. In 1750 charcoal iron production was 24,500 and coke iron was 2,500 tons. In 1788, the production of charcoal cast iron was 14,000 tons while coke iron production was 54,000 tons. In 1806, charcoal cast iron production

17688-419: Was met by a domestic industry based around Lancashire that produced fustian , a cloth with flax warp and cotton weft . Flax was used for the warp because wheel-spun cotton did not have sufficient strength, but the resulting blend was not as soft as 100% cotton and was more difficult to sew. On the eve of the Industrial Revolution, spinning and weaving were done in households, for domestic consumption, and as

17822-413: Was overcome by the steam engine. Use of coal in iron smelting started somewhat before the Industrial Revolution, based on innovations by Clement Clerke and others from 1678, using coal reverberatory furnaces known as cupolas. These were operated by the flames playing on the ore and charcoal or coke mixture, reducing the oxide to metal. This has the advantage that impurities (such as sulphur ash) in

17956-425: Was produced on machinery invented in Britain. In 1788, there were 50,000 spindles in Britain, rising to 7 million over the next 30 years. The earliest European attempts at mechanised spinning were with wool; however, wool spinning proved more difficult to mechanise than cotton. Productivity improvement in wool spinning during the Industrial Revolution was significant but far less than that of cotton. Arguably

#676323