90-506: RealD 3D is a digital stereoscopic projection technology made and sold by RealD . It is currently the most widely used technology for watching 3D films in theaters. Worldwide, RealD 3D is installed in more than 26,500 auditoriums by approximately 1,200 exhibitors in 72 countries as of June 2015. RealD 3D cinema technology is a polarized 3D system that uses circularly polarized light to produce stereoscopic image projection. The advantage of circular polarization over linear polarization
180-441: A photo , image , or picture ) is an image created by light falling on a photosensitive surface, usually photographic film or an electronic image sensor , such as a CCD or a CMOS chip. Most photographs are now created using a smartphone or camera , which uses a lens to focus the scene's visible wavelengths of light into a reproduction of what the human eye would see. The process and practice of creating such images
270-800: A positive image, the negative is most commonly transferred (' printed ') onto photographic paper . Printing the negative onto transparent film stock is used to manufacture motion picture films. Alternatively, the film is processed to invert the negative image, yielding positive transparency . Such positive images are usually mounted in frames, called slides. Before recent advances in digital photography, transparencies were widely used by professionals because of their sharpness and accuracy of color rendition. Most photographs published in magazines were taken on color transparency film. Originally, all photographs were monochromatic or hand-painted in color. Although methods for developing color photos were available as early as 1861, they did not become widely available until
360-436: A raster image (like a television picture) directly onto the retina of the eye. The user sees what appears to be a conventional display floating in space in front of them. For true stereoscopy, each eye must be provided with its own discrete display. To produce a virtual display that occupies a usefully large visual angle but does not involve the use of relatively large lenses or mirrors, the light source must be very close to
450-421: A "time parallax" for anything side-moving: for instance, someone walking at 3.4 mph will be seen 20% too close or 25% too remote in the most current case of a 2x60 Hz projection. To present stereoscopic pictures, two images are projected superimposed onto the same screen through polarizing filters or presented on a display with polarized filters. For projection, a silver screen is used so that polarization
540-403: A 3D illusion starting from a pair of 2D images, a stereogram. The easiest way to enhance depth perception in the brain is to provide the eyes of the viewer with two different images, representing two perspectives of the same object, with a minor deviation equal or nearly equal to the perspectives that both eyes naturally receive in binocular vision . To avoid eyestrain and distortion, each of
630-439: A camera, the daguerreotype , after himself. Its existence was announced to the world on 7 January 1839, but working details were not made public until 19 August that year. Other inventors soon made drastic improvements that reduced the required amount of exposure time from a few minutes to just a few seconds, making portrait photography truly practical and widely popular during this time. The daguerreotype had shortcomings, notably
720-868: A career out of taking pictures of "ghosts" or "spirits". There are many instances where people believe photos will bring bad luck either to the person taking the picture or people captured in the photo. For instance, a photograph taken of a pregnant woman will bring bad luck to the baby in the womb and photos taken of dead people will ensure that person is not successful in the afterlife. The production or distribution of certain types of photograph has been forbidden under modern laws, such as those of government buildings, highly classified regions, private property, copyrighted works, children's genitalia , child pornography and less commonly pornography overall. These laws vary greatly between jurisdictions. In some public property owned by government, such as law courts, government buildings, libraries, civic centres and some of
810-582: A computer by correlating the pixels in the left and right images. Solving the Correspondence problem in the field of Computer Vision aims to create meaningful depth information from two images. Anatomically, there are 3 levels of binocular vision required to view stereo images: These functions develop in early childhood. Some people who have strabismus disrupt the development of stereopsis, however orthoptics treatment can be used to improve binocular vision . A person's stereoacuity determines
900-426: A corner, or even from two sides and hold it at eye level. Every time the photograph bends, even a little, this can break down the emulsion . The very nature of enclosing a photograph in plastic encourages users to pick it up; users tend to handle plastic enclosed photographs less gently than non-enclosed photographs, simply because they feel the plastic enclosure makes the photo impervious to all mishandling. As long as
990-580: A cultural advancement because of photography. People thrive off of the selfies of their favorite celebrities, many receive millions of likes on social media because of one simple selfie. Ideal photograph storage involves placing each photo in an individual folder constructed from buffered, or acid-free paper . Buffered paper folders are especially recommended in cases when a photograph was previously mounted onto poor quality material or using an adhesive that will lead to even more acid creation. Store photographs measuring 8x10 inches or smaller vertically along
SECTION 10
#17327917982111080-492: A display. Passive viewers filter constant streams of binocular input to the appropriate eye. A shutter system works by openly presenting the image intended for the left eye while blocking the right eye's view, then presenting the right-eye image while blocking the left eye, and repeating this so rapidly that the interruptions do not interfere with the perceived fusion of the two images into a single 3D image. It generally uses liquid crystal shutter glasses. Each eye's glass contains
1170-528: A laboratory curiosity. It first became a widespread commercial reality with the introduction of Autochrome plates in 1907, but the plates were very expensive and not suitable for casual snapshot-taking with hand-held cameras. The mid-1930s saw the introduction of Kodachrome and Agfacolor Neu , the first easy-to-use color films of the modern multi-layer chromogenic type. These early processes produced transparencies for use in slide projectors and viewing devices, but color prints became increasingly popular after
1260-441: A liquid crystal layer which has the property of becoming dark when voltage is applied, being otherwise transparent. The glasses are controlled by a timing signal that allows the glasses to alternately darken over one eye, and then the other, in synchronization with the refresh rate of the screen. The main drawback of active shutters is that most 3D videos and movies were shot with simultaneous left and right views, so that it introduces
1350-422: A pair of two-dimensional images. Human vision, including the perception of depth, is a complex process, which only begins with the acquisition of visual information taken in through the eyes; much processing ensues within the brain, as it strives to make sense of the raw information. One of the functions that occur within the brain as it interprets what the eyes see is assessing the relative distances of objects from
1440-468: A photo is in its folder, there is no need to touch it; simply remove the folder from the box, lay it flat on the table, and open the folder. If for some reason the researchers or archivists do need to handle the actual photo, perhaps to examine the verso for writing, they can use gloves if there appears to be a risk from oils or dirt on the hands. Because daguerreotypes were rendered on a mirrored surface, many spiritualists also became practitioners of
1530-521: A real-world scene, made using a camera obscura , followed a few years later at Le Gras, France, in 1826, but Niépce's process was not sensitive enough to be practical for that application: a camera exposure lasting for hours or days was required. In 1829, Niépce entered into a partnership with Louis Daguerre , and the two collaborated to work out a similar, but more sensitive, and otherwise improved process. After Niépce's death in 1833, Daguerre concentrated on silver halide -based alternatives. He exposed
1620-409: A side-by-side image pair without using a viewing device. Two methods are available to freeview: Prismatic, self-masking glasses are now being used by some cross-eyed-view advocates. These reduce the degree of convergence required and allow large images to be displayed. However, any viewing aid that uses prisms, mirrors or lenses to assist fusion or focus is simply a type of stereoscope, excluded by
1710-406: A silver-plated copper sheet to iodine vapor, creating a layer of light-sensitive silver iodide ; exposed it in the camera for a few minutes; developed the resulting invisible latent image to visibility with mercury fumes; then bathed the plate in a hot salt solution to remove the remaining silver iodide, making the results light-fast. He named this first practical process for making photographs with
1800-428: A three ring binder. Stacking the photos horizontally within a flat box will greatly reduce ease of access, and binders leave three sides of the photo exposed to the effects of light and do not support the photograph evenly on both sides, leading to slumping and bending within the binder. The plastic used for enclosures has been manufactured to be as frictionless as possible to prevent scratching photos during insertion to
1890-457: A volume. Such displays use voxels instead of pixels . Volumetric displays include multiplanar displays, which have multiple display planes stacked up, and rotating panel displays, where a rotating panel sweeps out a volume. Other technologies have been developed to project light dots in the air above a device. An infrared laser is focused on the destination in space, generating a small bubble of plasma which emits visible light. Integral imaging
SECTION 20
#17327917982111980-650: A window. Unfortunately, this "pure" form requires the subject to be laser-lit and completely motionless—to within a minor fraction of the wavelength of light—during the photographic exposure, and laser light must be used to properly view the results. Most people have never seen a laser-lit transmission hologram. The types of holograms commonly encountered have seriously compromised image quality so that ordinary white light can be used for viewing, and non-holographic intermediate imaging processes are almost always resorted to, as an alternative to using powerful and hazardous pulsed lasers, when living subjects are photographed. Although
2070-471: Is a 3D pictures that seems to extend behind and in front of the screen itself. Stereoscopy Stereoscopy (also called stereoscopics , or stereo imaging ) is a technique for creating or enhancing the illusion of depth in an image by means of stereopsis for binocular vision . The word stereoscopy derives from Greek στερεός (stereos) 'firm, solid' and σκοπέω (skopeō) 'to look, to see'. Any stereoscopic image
2160-404: Is a single-image stereogram (SIS), designed to create the visual illusion of a three- dimensional ( 3D ) scene within the human brain from an external two-dimensional image. In order to perceive 3D shapes in these autostereograms, one must overcome the normally automatic coordination between focusing and vergence . The stereoscope is essentially an instrument in which two photographs of
2250-452: Is a technique for producing 3D displays which are both autostereoscopic and multiscopic , meaning that the 3D image is viewed without the use of special glasses and different aspects are seen when it is viewed from positions that differ either horizontally or vertically. This is achieved by using an array of microlenses (akin to a lenticular lens , but an X–Y or "fly's eye" array in which each lenslet typically forms its own image of
2340-513: Is achieved. This technique uses specific wavelengths of red, green, and blue for the right eye, and different wavelengths of red, green, and blue for the left eye. Eyeglasses which filter out the very specific wavelengths allow the wearer to see a full color 3D image. It is also known as spectral comb filtering or wavelength multiplex visualization or super-anaglyph . Dolby 3D uses this principle. The Omega 3D/ Panavision 3D system has also used an improved version of this technology In June 2012
2430-449: Is based on the fact that with a prism, colors are separated by varying degrees. The ChromaDepth eyeglasses contain special view foils, which consist of microscopically small prisms. This causes the image to be translated a certain amount that depends on its color. If one uses a prism foil now with one eye but not on the other eye, then the two seen pictures – depending upon color – are more or less widely separated. The brain produces
2520-692: Is based on the phenomenon of the human eye processing images more slowly when there is less light, as when looking through a dark lens. Because the Pulfrich effect depends on motion in a particular direction to instigate the illusion of depth, it is not useful as a general stereoscopic technique. For example, it cannot be used to show a stationary object apparently extending into or out of the screen; similarly, objects moving vertically will not be seen as moving in depth. Incidental movement of objects will create spurious artifacts, and these incidental effects will be seen as artificial depth not related to actual depth in
2610-491: Is called photography . The word photograph was coined in 1839 by Sir John Herschel and is based on the Greek φῶς ( phos ), meaning "light", and γραφή ( graphê ), meaning "drawing, writing", together meaning "drawing with light". The first permanent photograph, a contact-exposed copy of an engraving, was made in 1822 using the bitumen -based " heliography " process developed by Nicéphore Niépce . The first photographs of
2700-399: Is called a stereogram . Originally, stereogram referred to a pair of stereo images which could be viewed using a stereoscope . Most stereoscopic methods present a pair of two-dimensional images to the viewer. The left image is presented to the left eye and the right image is presented to the right eye. When viewed, the human brain perceives the images as a single 3D view, giving the viewer
2790-564: Is either a Texas Instruments Digital Light Processing device or Sony 's reflective LCOS ( liquid crystal on silicon ). A push-pull electro-optical liquid crystal modulator called a ZScreen is placed immediately in front of the projector lens to alternately polarize each frame. It circularly polarizes the frames clockwise for the right eye and counter-clockwise for the left eye. The audience wears circularly polarized glasses that have oppositely polarized lenses that ensures each eye sees only its designated frame. In RealD Cinema, each frame
RealD 3D - Misplaced Pages Continue
2880-424: Is incomplete. There are also mainly two effects of stereoscopy that are unnatural for human vision: (1) the mismatch between convergence and accommodation, caused by the difference between an object's perceived position in front of or behind the display or screen and the real origin of that light; and (2) possible crosstalk between the eyes, caused by imperfect image separation in some methods of stereoscopy. Although
2970-409: Is limited by the lesser of the display medium or human eye. This is because as the dimensions of an image are increased, either the viewing apparatus or viewer themselves must move proportionately further away from it in order to view it comfortably. Moving closer to an image in order to see more detail would only be possible with viewing equipment that adjusted to the difference. Freeviewing is viewing
3060-471: Is not illegal to photograph a person who does not actively object. In South Africa photographing people in public is legal. Reproducing and selling photographs of people is legal for editorial and limited fair use commercial purposes. There exists no case law to define what the limits on commercial use are. In the United Kingdom there are no laws forbidding photography of private property from
3150-439: Is not possible to recreate a full 3-dimensional sound field with just two stereophonic speakers, it is an overstatement to call dual 2D images "3D". The accurate term "stereoscopic" is more cumbersome than the common misnomer "3D", which has been entrenched by many decades of unquestioned misuse. Although most stereoscopic displays do not qualify as real 3D display, all real 3D displays are also stereoscopic displays because they meet
3240-402: Is preserved. On most passive displays every other row of pixels is polarized for one eye or the other. This method is also known as being interlaced. The viewer wears low-cost eyeglasses which also contain a pair of opposite polarizing filters. As each filter only passes light which is similarly polarized and blocks the opposite polarized light, each eye only sees one of the images, and the effect
3330-451: Is projected three times to reduce flicker, a system called triple flash. The source video is usually produced at 24 frames per second per eye (total 48 frames/s), which may result in subtle ghosting and stuttering on horizontal camera movements. A silver screen is used to maintain the light polarization upon reflection and to reduce reflection loss to counter some of the significant light loss due to polarization filter absorption. The result
3420-467: Is that viewers are able to tilt their head and look about the theater naturally without seeing double or darkened images. However, as with other systems, any significant head tilt will result in incorrect parallax and prevent the brain from correctly fusing the stereoscopic images. The high-resolution, digital cinema grade video projector alternately projects right-eye frames and left-eye frames, switching between them 144 times per second. The projector
3510-570: Is undesirable, this is called a "window violation." This can best be understood by returning to the analogy of an actual physical window. Therefore, there is a contradiction between two different depth cues: some elements of the image are hidden by the window, so that the window appears closer than these elements, and the same elements of the image appear closer than the window. As such, the stereo window must always be adjusted to avoid window violations to prevent viewer discomfort from conflicting depth cues. Photograph A photograph (also known as
3600-435: Is visible from a different range of positions in front of the display. This allows the viewer to move left-right in front of the display and see the correct view from any position. The technology includes two broad classes of displays: those that use head-tracking to ensure that each of the viewer's two eyes sees a different image on the screen, and those that display multiple views so that the display does not need to know where
3690-404: Is visually indistinguishable from the original, given the original lighting conditions. It creates a light field identical to that which emanated from the original scene, with parallax about all axes and a very wide viewing angle. The eye differentially focuses objects at different distances and subject detail is preserved down to the microscopic level. The effect is exactly like looking through
RealD 3D - Misplaced Pages Continue
3780-467: The Stereo Realist format, introduced in 1947, is by far the most common. The user typically wears a helmet or glasses with two small LCD or OLED displays with magnifying lenses, one for each eye. The technology can be used to show stereo films, images or games, but it can also be used to create a virtual display. Head-mounted displays may also be coupled with head-tracking devices, allowing
3870-576: The 1940s or 1950s, and even so, until the 1960s, most photographs were taken in black and white. Since then, color photography has dominated popular photography, although black-and-white is still used, being easier to develop than color. Panoramic format images can be taken with cameras like the Hasselblad Xpan on standard film. Since the 1990s, panoramic photos have been available on the Advanced Photo System (APS) film. APS
3960-569: The Omega 3D/Panavision 3D system was discontinued by DPVO Theatrical, who marketed it on behalf of Panavision, citing "challenging global economic and 3D market conditions". Anaglyph 3D is the name given to the stereoscopic 3D effect achieved by means of encoding each eye's image using filters of different (usually chromatically opposite) colors, typically red and cyan . Red-cyan filters can be used because our vision processing systems use red and cyan comparisons, as well as blue and yellow, to determine
4050-421: The color and contours of objects. Anaglyph 3D images contain two differently filtered colored images, one for each eye. When viewed through the "color-coded" "anaglyph glasses", each of the two images reaches one eye, revealing an integrated stereoscopic image. The visual cortex of the brain fuses this into perception of a three dimensional scene or composition. The ChromaDepth procedure of American Paper Optics
4140-404: The continuing miniaturization of video and other equipment these devices are beginning to become available at more reasonable cost. Head-mounted or wearable glasses may be used to view a see-through image imposed upon the real world view, creating what is called augmented reality . This is done by reflecting the video images through partially reflective mirrors. The real world view is seen through
4230-612: The customary definition of freeviewing. Stereoscopically fusing two separate images without the aid of mirrors or prisms while simultaneously keeping them in sharp focus without the aid of suitable viewing lenses inevitably requires an unnatural combination of eye vergence and accommodation . Simple freeviewing therefore cannot accurately reproduce the physiological depth cues of the real-world viewing experience. Different individuals may experience differing degrees of ease and comfort in achieving fusion and good focus, as well as differing tendencies to eye fatigue or strain. An autostereogram
4320-405: The development of a realistic imaging method: For the purposes of illustration I have employed only outline figures, for had either shading or colouring been introduced it might be supposed that the effect was wholly or in part due to these circumstances, whereas by leaving them out of consideration no room is left to doubt that the entire effect of relief is owing to the simultaneous perception of
4410-433: The display, rather than worn by the user, to enable each eye to see a different image. Because headgear is not required, it is also called "glasses-free 3D". The optics split the images directionally into the viewer's eyes, so the display viewing geometry requires limited head positions that will achieve the stereoscopic effect. Automultiscopic displays provide multiple views of the same scene, rather than just two. Each view
4500-515: The earliest stereoscope views, issued in the 1850s, were on glass. In the early 20th century, 45x107 mm and 6x13 cm glass slides were common formats for amateur stereo photography, especially in Europe. In later years, several film-based formats were in use. The best-known formats for commercially issued stereo views on film are Tru-Vue , introduced in 1931, and View-Master , introduced in 1939 and still in production. For amateur stereo slides,
4590-521: The eye. A contact lens incorporating one or more semiconductor light sources is the form most commonly proposed. As of 2013, the inclusion of suitable light-beam-scanning means in a contact lens is still very problematic, as is the alternative of embedding a reasonably transparent array of hundreds of thousands (or millions, for HD resolution) of accurately aligned sources of collimated light. There are two categories of 3D viewer technology, active and passive. Active viewers have electronics which interact with
SECTION 50
#17327917982114680-446: The fragility of the mirror-like image surface and the particular viewing conditions required to see the image properly. Each was a unique, opaque positive that could only be duplicated by copying it with a camera. Inventors set about working out improved processes that would be more practical. By the end of the 1850s, the daguerreotype had been replaced by the less expensive and more easily viewed ambrotype and tintype , which made use of
4770-568: The generation of two images. Wiggle stereoscopy is an image display technique achieved by quickly alternating display of left and right sides of a stereogram. Found in animated GIF format on the web, online examples are visible in the New-York Public Library stereogram collection Archived 25 May 2022 at the Wayback Machine . The technique is also known as "Piku-Piku". For general-purpose stereo photography, where
4860-432: The goal is to duplicate natural human vision and give a visual impression as close as possible to actually being there, the correct baseline (distance between where the right and left images are taken) would be the same as the distance between the eyes. When images taken with such a baseline are viewed using a viewing method that duplicates the conditions under which the picture is taken, then the result would be an image much
4950-491: The huge bandwidth required to transmit a stream of them, have confined this technology to the research laboratory. In 2013, a Silicon Valley company, LEIA Inc , started manufacturing holographic displays well suited for mobile devices (watches, smartphones or tablets) using a multi-directional backlight and allowing a wide full- parallax angle view to see 3D content without the need of glasses. Volumetric displays use some physical mechanism to display points of light within
5040-440: The introduction of chromogenic color print paper in the 1940s. The needs of the motion picture industry generated a number of special processes and systems, perhaps the best-known being the now-obsolete three-strip Technicolor process. Non-digital photographs are produced with a two-step chemical process. In the two-step process, the light-sensitive film captures a negative image (colors and lights/darks are inverted). To produce
5130-592: The longer edge of the photo in the buffered paper folder, within a larger archival box, and label each folder with relevant information to identify it. The rigid nature of the folder protects the photo from slumping or creasing, as long as the box is not packed too tightly or under filled. Folder larger photos or brittle photos stacked flat within archival boxes with other materials of comparable size. The most stable of plastics used in photo preservation, polyester , does not generate any harmful chemical elements, nor does it have any capability to absorb acids generated by
5220-405: The lower criteria also. Most 3D displays use this stereoscopic method to convey images. It was first invented by Sir Charles Wheatstone in 1838, and improved by Sir David Brewster who made the first portable 3D viewing device. Wheatstone originally used his stereoscope (a rather bulky device) with drawings because photography was not yet available, yet his original paper seems to foresee
5310-463: The minimum image disparity they can perceive as depth. It is believed that approximately 12% of people are unable to properly see 3D images, due to a variety of medical conditions. According to another experiment up to 30% of people have very weak stereoscopic vision preventing them from depth perception based on stereo disparity. This nullifies or greatly decreases immersion effects of stereo to them. Stereoscopic viewing may be artificially created by
5400-518: The mirrors' reflective surface. Experimental systems have been used for gaming, where virtual opponents may peek from real windows as a player moves about. This type of system is expected to have wide application in the maintenance of complex systems, as it can give a technician what is effectively "x-ray vision" by combining computer graphics rendering of hidden elements with the technician's natural vision. Additionally, technical data and schematic diagrams may be delivered to this same equipment, eliminating
5490-513: The museums in Hong Kong, photography is not allowed without permission from the government. It is illegal to equip or take photographs and recording in a place of public entertainment, such as cinemas and indoor theaters. In Hungary, from 15 March 2014 when the long-awaited Civil Code was published, the law re-stated what had been normal practice, namely, that a person had the right to refuse being photographed. However, implied consent exists: it
SECTION 60
#17327917982115580-428: The need to obtain and carry bulky paper documents. Augmented stereoscopic vision is also expected to have applications in surgery, as it allows the combination of radiographic data ( CAT scans and MRI imaging) with the surgeon's vision. A virtual retinal display (VRD), also known as a retinal scan display (RSD) or retinal projector (RP), not to be confused with a " Retina Display ", is a display technology that draws
5670-474: The new art form. Spiritualists would claim that the human image on the mirrored surface was akin to looking into one's soul. The spiritualists also believed that it would open their souls and let demons in. Among some Muslims, it is makruh (disliked) to perform salah (worship) in a place decorated with photographs. Photography and darkroom anomalies and artifacts sometimes lead viewers to believe that spirits or demons have been captured in photos. Some have made
5760-420: The original photographic processes have proven impractical for general use, the combination of computer-generated holograms (CGH) and optoelectronic holographic displays, both under development for many years, has the potential to transform the half-century-old pipe dream of holographic 3D television into a reality; so far, however, the large amount of calculation required to generate just one detailed hologram, and
5850-518: The perception of 3D depth. However, the 3D effect lacks proper focal depth, which gives rise to the Vergence-accommodation conflict . Stereoscopy is distinguished from other types of 3D displays that display an image in three full dimensions , allowing the observer to increase information about the 3-dimensional objects being displayed by head and eye movements . Stereoscopy creates the impression of three-dimensional depth from
5940-504: The photograph itself. Polyester sleeves and encapsulation have been praised for their ability to protect the photograph from humidity and environmental pollution , slowing the reaction between the item and the atmosphere. This is true, however the polyester just as frequently traps these elements next to the material it is intended to protect. This is especially risky in a storage environment that experiences drastic fluctuations in humidity or temperature, leading to ferrotyping, or sticking of
6030-406: The photograph to the plastic. Photographs sleeved or encapsulated in polyester cannot be stored vertically in boxes because they will slide down next to each other within the box, bending and folding, nor can the archivist write directly onto the polyester to identify the photograph. Therefore, it is necessary to either stack polyester protected photographs horizontally within a box, or bind them in
6120-424: The photograph, where they deposit as an oily film, attracting further lint and dust. At this time, there is no test to evaluate the long-term effects of these components on photographs. In addition, the plastic sleeves can develop kinks or creases in the surface, which will scratch away at the emulsion during handling. It is best to leave photographs lying flat on the table when viewing them. Do not pick it up from
6210-403: The point of view chosen rather than actual physical separation of cameras or lenses. The concept of the stereo window is always important, since the window is the stereoscopic image of the external boundaries of left and right views constituting the stereoscopic image. If any object, which is cut off by lateral sides of the window, is placed in front of it, an effect results that is unnatural and
6300-399: The presentation of a slightly different image to each eye , which adds the first of these cues ( stereopsis ). The two images are then combined in the brain to give the perception of depth. Because all points in the image produced by stereoscopy focus at the same plane regardless of their depth in the original scene, the second cue, focus, is not duplicated and therefore the illusion of depth
6390-415: The presentation of images at very high resolution and in full spectrum color, simplicity in creation, and little or no additional image processing is required. Under some circumstances, such as when a pair of images is presented for freeviewing, no device or additional optical equipment is needed. The principal disadvantage of side-by-side viewers is that large image displays are not practical and resolution
6480-477: The real objects themselves. Stereoscopy is used in photogrammetry and also for entertainment through the production of stereograms. Stereoscopy is useful in viewing images rendered from large multi- dimensional data sets such as are produced by experimental data. Modern industrial three-dimensional photography may use 3D scanners to detect and record three-dimensional information. The three-dimensional depth information can be reconstructed from two images using
6570-414: The recently introduced collodion process . Glass plate collodion negatives used to make prints on albumen paper soon became the preferred photographic method and held that position for many years, even after the introduction of the more convenient gelatin process in 1871. Refinements of the gelatin process have remained the primary black-and-white photographic process to this day, differing primarily in
6660-406: The rise of digital prints . These prints are created from stored graphic formats such as JPEG , TIFF , and RAW . The types of printers used include inkjet printers , dye-sublimation printers , laser printers , and thermal printers . Inkjet prints are sometimes given the coined name " Giclée ". The Web has been a popular medium for storing and sharing photos ever since the first photograph
6750-462: The same as that which would be seen at the site the photo was taken. This could be described as "ortho stereo." However, there are situations in which it might be desirable to use a longer or shorter baseline. The factors to consider include the viewing method to be used and the goal in taking the picture. The concept of baseline also applies to other branches of stereography, such as stereo drawings and computer generated stereo images , but it involves
6840-604: The same object, taken from slightly different angles, are simultaneously presented, one to each eye. A simple stereoscope is limited in the size of the image that may be used. A more complex stereoscope uses a pair of horizontal periscope -like devices, allowing the use of larger images that can present more detailed information in a wider field of view. One can buy historical stereoscopes such as Holmes stereoscopes as antiques. Some stereoscopes are designed for viewing transparent photographs on film or glass, known as transparencies or diapositives and commonly called slides . Some of
6930-401: The scene without assistance from a larger objective lens ) or pinholes to capture and display the scene as a 4D light field , producing stereoscopic images that exhibit realistic alterations of parallax and perspective when the viewer moves left, right, up, down, closer, or farther away. Integral imaging may not technically be a type of autostereoscopy, as autostereoscopy still refers to
7020-556: The scene. Stereoscopic viewing is achieved by placing an image pair one above one another. Special viewers are made for over/under format that tilt the right eyesight slightly up and the left eyesight slightly down. The most common one with mirrors is the View Magic. Another with prismatic glasses is the KMQ viewer . A recent usage of this technique is the openKMQ project. Autostereoscopic display technologies use optical components in
7110-554: The sensitivity of the emulsion and the support material used, which was originally glass, then a variety of flexible plastic films , along with various types of paper for the final prints. Color photography is almost as old as black-and-white , with early experiments including John Herschel 's Anthotype prints in 1842, the pioneering work of Louis Ducos du Hauron in the 1860s, and the Lippmann process unveiled in 1891, but for many years color photography remained little more than
7200-399: The sleeves. Unfortunately, the slippery nature of the enclosure generates a build-up of static electricity , which attracts dust and lint particles. The static can attract the dust to the inside of the sleeve, as well, where it can scratch the photograph. Likewise, these components that aid in insertion of the photo, referred to as slip agents, can break down and transfer from the plastic to
7290-461: The spatial impression from this difference. The advantage of this technology consists above all of the fact that one can regard ChromaDepth pictures also without eyeglasses (thus two-dimensional) problem-free (unlike with two-color anaglyph). However the colors are only limitedly selectable, since they contain the depth information of the picture. If one changes the color of an object, then its observed distance will also be changed. The Pulfrich effect
7380-424: The term "3D" is ubiquitously used, the presentation of dual 2D images is distinctly different from displaying an image in three full dimensions . The most notable difference is that, in the case of "3D" displays, the observer's head and eye movement do not change the information received about the 3-dimensional objects being viewed. Holographic displays and volumetric display do not have this limitation. Just as it
7470-437: The two 2D images should be presented to the viewer so that any object at infinite distance is perceived by the eye as being straight ahead, the viewer's eyes being neither crossed nor diverging. When the picture contains no object at infinite distance, such as a horizon or a cloud, the pictures should be spaced correspondingly closer together. The advantages of side-by-side viewers is the lack of diminution of brightness, allowing
7560-554: The two monocular projections, one on each retina. But if it be required to obtain the most faithful resemblances of real objects, shadowing and colouring may properly be employed to heighten the effects. Careful attention would enable an artist to draw and paint the two component pictures, so as to present to the mind of the observer, in the resultant perception, perfect identity with the object represented. Flowers, crystals, busts, vases, instruments of various kinds, &c., might thus be represented so as not to be distinguished by sight from
7650-430: The user to "look around" the virtual world by moving their head, eliminating the need for a separate controller. Performing this update quickly enough to avoid inducing nausea in the user requires a great amount of computer image processing. If six axis position sensing (direction and position) is used then wearer may move about within the limitations of the equipment used. Owing to rapid advancements in computer graphics and
7740-481: The viewer's brain, as demonstrated with the Van Hare Effect , where the brain perceives stereo images even when the paired photographs are identical. This "false dimensionality" results from the developed stereoacuity in the brain, allowing the viewer to fill in depth information even when few if any 3D cues are actually available in the paired images. Traditional stereoscopic photography consists of creating
7830-412: The viewer, and the depth dimension of those objects. The cues that the brain uses to gauge relative distances and depth in a perceived scene include: (All but the first two of the above cues exist in traditional two-dimensional images, such as paintings, photographs, and television.) Stereoscopy is the production of the impression of depth in a photograph , movie , or other two-dimensional image by
7920-408: The viewers' eyes are directed. Examples of autostereoscopic displays technology include lenticular lens , parallax barrier , volumetric display , holography and light field displays. Laser holography, in its original "pure" form of the photographic transmission hologram , is the only technology yet created which can reproduce an object or scene with such complete realism that the reproduction
8010-441: Was developed by several of the major film manufacturers to provide a film with different formats and computerized options available, though APS panoramas were created using a mask in panorama-capable cameras, far less desirable than a true panoramic camera, which achieves its effect through a wider film format. APS has become less popular and has been discontinued. The advent of the microcomputer and digital photography has led to
8100-499: Was published on the web by Tim Berners-Lee in 1992 (an image of the CERN house band Les Horribles Cernettes ). Today, popular sites such as Flickr , PhotoBucket , and 500px are used by millions of people to share their pictures. The first "selfie", or self-portrait, was taken by Robert Cornelious back in 1839. "Selfies" have become one of the most common photographs, especially among female young adults. Social media has become such
#210789