Misplaced Pages

#473526

67-513: WRX , or wrx , is a three-letter abbreviation that may refer to: FIA World Rallycross Championship GB-WRX, the ISO 3166-2:GB code for Wrexham (county borough) in Wales, UK Subaru Impreza WRX (World Rally eXperimental) (1992–2014) Subaru WRX (World Rally eXperimental) (2014–present) Western Refrigerator Line (from its reporting mark) wrx,

134-457: A 45 mm (1.8 in) intake restrictor . The engines run 50 psi (3.4 bar) of boost pressure, and completely unrestricted, are capable of making about 1,000 hp (750 kW) and 1,100 lb⋅ft (1,500 N⋅m) of torque. They are four-wheel-drive , and use a Sadev 6-speed sequential gearbox . They use launch control , and are capable of accelerating from 0–60 mph (0–97 km/h) in under 2 seconds; which

201-437: A 5- or 6-speed sequential gearbox . They weigh between 920–1,000 kg (2,030–2,200 lb) including the driver, depending on how many valves per cylinder the engine has. They are capable of a 0–60 mph (0–97 km/h) time in just under 4.5 seconds. The top-level all-electric RX1e Supercar division uses two electric motors , each producing 340 hp (250 kW) and 440 N⋅m (320 lbf⋅ft) of torque; for

268-414: A 6-speed sequential gearbox . They have a minimum weight of 1,100 kg (2,400 lb), including the driver. The RX3 (formerly Super 1600) class uses 1.6 L (1600 cc), naturally aspirated , four-cylinder engines ; generating between 220–250 hp (160–190 kW) and between 190–200 N⋅m (140–150 lbf⋅ft) of torque. They are only two-wheel-drive ( front-wheel-drive ), and use either

335-410: A center differential (or similar device). The definition notes that part-time systems may have a low range. Full-time AWD systems drive both front and rear axles at all times via a center (interaxle) differential. The torque split of that differential may be fixed or variable depending on the type of center differential. This system can be used on any surface at any speed. The definition does not address

402-473: A government demand for a four-wheel-drive passenger vehicle. The modern Geländewagen such as the Mercedes-Benz G-Class still feature some of the attributes, with the exception of fully independent suspension, since it can compromise ground clearance. The Unimog is also a result of Mercedes 4x4 technology. The first Russian-produced four-wheel-drive vehicle, also in part for civilian use, was

469-534: A production GT sports car. While most 4WD systems split torque evenly, the Jensen split torque roughly 40% front, 60% rear by gearing the front and rear at different ratios. American Motors Corporation (AMC) acquired Kaiser's Jeep Division in 1970 and quickly upgraded and expanded the entire line of off-road 4WD vehicles. With its added roadworthiness, the top-range full-sized Grand Wagoneer continued to compete with traditional luxury cars . Partially hand-built, it

536-415: A system that applies torque to all four wheels (permanently or on-demand) or is targeted at improving on-road traction and performance (particularly in inclement conditions), rather than for off-road applications. Some all-wheel drive electric vehicles use one motor for each axle, thereby eliminating a mechanical differential between the front and rear axles. An example of this is the dual-motor variant of

603-564: A total of 335 hp (250 kW) and 510 N⋅m (380 lbf⋅ft) of torque. They are also four-wheel-drive, and weigh 1,290 kg (2,840 lb). Projekt E used electric powertrain kits supplied by STARD. The first car used a Ford Fiesta bodyshell; the STARD ElectRX was a three-motor, all-wheel drive car with 450 kW (600 hp) combined output. Points are scored as follows: 2014-2021 World Championship points were scored as follows: Records correct up to and including

670-550: A total of 41,674 units made by 1928. Daimler-Benz also has a history in four-wheel drive. After the Daimler Motoren Gesellschaft had built a four-wheel-driven vehicle called Dernburg-Wagen , also equipped with four-wheel steering , in 1907, that was used by German colonial civil servant, Bernhard Dernburg, in Namibia ; Mercedes and BMW, in 1926, introduced some rather sophisticated four-wheel drives,

737-417: A total of 680 hp (510 kW) and 880 N⋅m (650 lbf⋅ft) of instant torque. They are four-wheel-drive, weigh between 1,300–1,330 kg (2,870–2,930 lb), and can accelerate from 0–60 mph (0–97 km/h) in 1.8 seconds. The second-tier all-electric RX2e division uses two electric motors, each producing 167.5 hp (124.9 kW) and 255 N⋅m (188 lbf⋅ft) of torque; for

SECTION 10

#1732780634474

804-527: A truck with dual rear wheels on two rear axles, so actually having ten wheels, its configuration would still be formulated as 6x4. During World War II, the U.S. military would typically use spaces and a capital 'X' – as "4 X 2" or "6 X 4". Four-wheel drive (4WD) refers to vehicles with two axles providing torque to four axle ends. In the North American market, the term generally refers to a system optimized for off-road driving conditions. The term "4WD"

871-399: A two-door roadster, a two-door pickup truck, and a four-door phaeton, all equipped with a transfer case that engaged the front wheels, powered by a 1.3-litre, two-cylinder, air-cooled OHV V-twin engine. The 1937 Mercedes-Benz G5 and BMW 325 4×4 featured full-time four-wheel drive, four-wheel steering, three locking differentials, and fully independent suspension. They were produced because of

938-412: A wheel is slipping, and only activates when wheel slip is detected. Therefore, typically no mechanism exists to actively prevent wheel slip (i.e., locking the differential in advance of wheel slip is not possible); rather, the system is designed to expressly permit wheel slip to occur, and then to attempt to send torque to the wheels with the best traction. If preventing all-wheel slip is a requirement, this

1005-423: Is a limiting design. The architecture of an AWD/4WD system can be described by showing its possible operating modes. A single vehicle may have the ability to operate in multiple modes depending on driver selection. The different modes are: In addition to these basic modes, some implementations can combine these modes. The system could have a clutch across the center differential, for example, capable of modulating

1072-413: Is described as "all-wheel drive" (AWD). However, "four-wheel drive" typically refers to a set of specific components and functions, and intended off-road application, which generally complies with modern use of the terminology. Four-wheel-drive systems were developed in many different markets and used in many different vehicle platforms . There is no universally accepted set of terminology that describes

1139-441: Is distributed to all four wheels, a third or 'center' differential can be used to distribute power between the front and rear axles. The described system handles extremely well, as it is able to accommodate various forces of movement and distribute power evenly and smoothly, making slippage unlikely. Once it does slip, however, recovery is difficult. If the left front wheel of a 4WD vehicle slips on an icy patch of road, for instance,

1206-458: Is exceeded at the low-traction side. A fairly recent innovation in automobiles is electronic traction control . It typically uses a vehicle's braking system to slow a spinning wheel. This forced slowing emulates the function of a limited-slip differential, and by using the brakes more aggressively to ensure wheels are being driven at the same speed, can also emulate a locking differential. This technique normally requires wheel sensors to detect when

1273-423: Is faster than a Formula One car . Fully prepared, the cars weigh about 1,300 kg (2,900 lb), including the driver, and with oil and fuel. The second-tier RX2 Supercar Lites division uses a 16-valve, 2.4 L, naturally aspirated , Ford Duratec inline-four engine , making between 310–320 hp (230–240 kW) and 300 N⋅m (220 lbf⋅ft) of torque. They are also four-wheel-drive , and also use

1340-490: Is frequently used to refer to a class of vehicles in general. Syntactically, the first figure indicates the total number of axle ends and the second indicates the number of axle ends that are powered. Accordingly, 4×2 means a four-wheel vehicle that transmits engine torque to only two axle ends: the front two in front-wheel drive or the rear two in rear-wheel drive . Similarly, a 6×4 vehicle has three axles, two of which provide torque to two axle ends each. If this vehicle were

1407-460: Is much less acceptable for 4WD vehicles, because 4WD vehicles have twice as many wheels with which to lose traction, increasing the likelihood that it may happen. 4WD vehicles may also be more likely to drive on surfaces with reduced traction. However, since torque is divided between four wheels rather than two, each wheel receives roughly half the torque of a 2WD vehicle, reducing the potential for wheel slip. Many differentials have no way of limiting

SECTION 20

#1732780634474

1474-555: Is typically designated for vehicles equipped with a transfer case that switches between 2WD and 4WD operating modes, either manually or automatically. All-wheel drive (AWD) was historically synonymous with "four-wheel drive" on four-wheeled vehicles, and six-wheel drive on 6×6s , and so on, being used in that fashion at least as early as the 1920s. Today in North America, the term is applied to both heavy vehicles and light passenger vehicles. When referring to heavy vehicles,

1541-568: The Canadian Military Pattern trucks , of which 4x4s were by far the most prevalent of their various driveline configurations. All told, North America built about 1 + 1 ⁄ 2 million 4x4 driven vehicles during the war, Availability of certain critical components, such transfer cases and especially constant-velocity joints affected development. Though not used much on commercial vehicles, all-wheel drive vehicles all needed these; and they would use two or three times

1608-632: The GAZ-61 , developed in the Soviet Union in 1938. "Civilian use" may be a bit of a misnomer, as most, if not all, were used by the Soviet government and military (as command cars), but the GAZ-61-73 version is the first four-wheel-drive vehicle with a normal closed sedan body. Elements of the chassis were used in subsequent military vehicles such as the 1940 GAZ-64 and the 1943 GAZ-67 , as well as

1675-822: The Riga Motor Museum in Latvia . FIA announced in August 2020 that RX2e would be replacing the RX2 category for the 2021 season. The top World Rallycross Championship series switched to electric cars (RX1e) in August 2022, making World RX an all-electric race series. For 2022, there are two World Rallycross Championships and two European Rallycross Championships: The top-level RX1 Supercars division use 2.0 L, turbocharged , four-cylinder engines, which produce approximately 570–600 hp (430–450 kW), and between 620–680 lb⋅ft (840–920 N⋅m) of torque, while using

1742-558: The Tesla Model S , which controls the torque distribution between its two motors electronically. According to the SAE International standard J1952, AWD is the preferred term for all the systems described above. The standard subdivides AWD systems into three categories. Part-time AWD systems require driver intervention to couple and decouple the secondary axle from the primarily driven axle, and these systems do not have

1809-539: The k. u. k. Hofwagenfabrik Ludwig Lohner & Co. in Vienna in 1899, presented to the public during the 1900 World Exhibition in Paris. The vehicle was a series hybrid car that used an electric hub motor at each wheel, powered by batteries, which were in turn charged by a gasoline-engine generator. It was clumsily heavy, and due to its unusual status, the so-called Lohner–Porsche is not frequently given its credit as

1876-475: The 2022 World RX of Germany. Key Four-wheel drive A four-wheel drive , also called 4×4 ("four by four") or 4WD , is a two-axled vehicle drivetrain capable of providing torque to all of its wheels simultaneously. It may be full-time or on-demand, and is typically linked via a transfer case providing an additional output drive shaft and, in many instances, additional gear ranges . A four-wheel drive vehicle with torque supplied to both axles

1943-672: The American Four Wheel Drive Auto Company (FWD) of Wisconsin , founded in 1908. (not to be confused with the term "FWD" as an initialism for front-wheel-drive ) Along with the 1 1 ⁄ 2 - and 2-ton Nash Quad (see below), the 3-ton FWD Model B became a standard military four-wheel-drive truck for the U.S. Army in World War I. Some 16,000 FWD Model B trucks were built for the British and American armies during World War I – about half by FWD and

2010-563: The G1, the G4, and G4 following. Mercedes and BMW developed this further in 1937. The American Marmon-Herrington Company was founded in 1931 to serve a growing market for moderately priced four-wheel-drive vehicles. Marmon-Herrington specialized in converting Ford trucks to four-wheel drive and got off to a successful start by procuring contracts for military and commercial aircraft refueling trucks, 4×4 chassis for towing light weaponry, and an order from

2077-574: The ISO 639-3 code for the Wae Rana language of Flores, Indonesia WRX, the National Rail code for Wrexham General railway station in Wales, UK See also All pages with titles containing WRX All pages with titles beginning with WRX Topics referred to by the same term [REDACTED] This disambiguation page lists articles associated with the title WRX . If an internal link led you here, you may wish to change

WRX - Misplaced Pages Continue

2144-506: The Iraqi Pipeline Company for what were the largest trucks built at the time. The early Marmon-Herringtons proved to be the exception to the rule — 4WD cars and trucks developed in the 1930s were mainly built for governments, with (future) warfare applications in mind. Dodge developed its first four-wheel-drive truck in 1934 — a military 1 + 1 ⁄ 2 ton designated K-39-X-4(USA), of which 796 units were built for

2211-493: The J1952 standard notes secondary classifications resulting in a total of eight systems, designated as: Two wheels fixed to the same axle (but on the opposite axle ends) need to turn at different speeds as a vehicle goes around a curve. The reason is that the wheel that is located on the inner side of the curve needs to travel less distance than the opposite wheel for the same duration of time. However, if both wheels are connected to

2278-616: The Jeep, and also inline-four powered, the Land Rover appeared at the Amsterdam Motor Show in 1948. Originally conceived as a stop-gap product for the struggling Rover car company, despite chronic underinvestment, it succeeded far better than their passenger cars. Inspired by a Willys MB – the ubiquitous WWII "jeep" – that was frequently run off-road on the farm belonging to chief engineer Maurice Wilks , Land Rover developed

2345-428: The U.S. Army in several configurations. Timken supplied front axles and transfer cases, added to militarized a civilian truck. The Timken transfer case was the first part-time design, that allowed the driver to engage or disengage four-wheel drive using a lever inside the cab. In spite of the limited 1930s U.S. military budgets, the '34 truck was liked well-enough that a more modern 1 + 1 ⁄ 2 ton truck

2412-480: The amount of engine power that gets sent to their attached output shafts. As a result, if a tire loses traction on acceleration, either because of a low-traction situation (e.g., driving on gravel or ice) or the engine power overcomes available traction, the tire that is not slipping receives little or no power from the engine. In very low-traction situations, this can prevent the vehicle from moving at all. To overcome this, several designs of differentials can either limit

2479-442: The amount of slip (these are called 'limited-slip' differentials) or temporarily lock the two output shafts together to ensure that engine power reaches all driven wheels equally. Locking differentials work by temporarily locking together a differential's output shafts, causing all wheels to turn at the same rate, providing torque in case of slippage. This is generally used for the center differential, which distributes power between

2546-473: The complete front-engine, four-wheel-drive system. The AMC Eagle was offered as a sedan , coupe , and station wagon with permanent automatic all-wheel drive passenger models. The new Eagles combined Jeep technology with an existing and proven AMC passenger automobile platform . They ushered a whole new product category of "sport-utility" or crossover SUV . AMC's Eagles came with the comfort and high-level appointments expected of regular passenger models and used

2613-409: The differential to the wheel, at different speeds. The differential does this by distributing angular force (in the form of torque ) evenly, while distributing angular velocity (turning speed) such that the average for the two output shafts is equal to that of the differential ring gear . When powered, each axle requires a differential to distribute power between the left and right sides. When power

2680-545: The driver of getting out to lock hubs and having to manually select between 2WD and 4WD modes, it dominated all other makes in FIA rally competition. Gene Henderson and Ken Pogue won the Press-on-Regardless Rally FIA championship with a Quadra Trac-equipped Jeep in 1972. American Motors introduced the innovative Eagle for the 1980 model year. These were the first American mass-production cars to use

2747-587: The early years of the war, they relied significantly on Lend-Lease vehicles, provided by the western allies. In 1943, they launched a further-developed version: the GAZ-67 . By contrast, the Axis powers ' closest equivalent to the jeep, the VW Kübelwagen , of which only some 50,000 were built, though being equipped with portal gear hubs, only had rear-wheel drive. Willys introduced the model CJ-2A in 1945,

WRX - Misplaced Pages Continue

2814-568: The first FIA World Rallycross Championship season in 2014, two classes were run, Supercar (later RX1) and the supporting RX Lites series (later RX2). RX Lites teams raced identical cars prepared by OlsbergsMSE. The World RX Championship series was introduced to distinguish it from the FIA European Rallycross Championship , which has been contested since 1976 and was renamed in March 2013. An electric category

2881-492: The first four-wheel driven automobile. The world's first four-wheel-drive car directly powered by an internal-combustion engine, and the first with a front-engine, four-wheel-drive layout , was the Dutch Spyker 60 H.P., Commissioned for the Paris to Madrid race of 1903, it was presented that year by brothers Jacobus and Hendrik-Jan Spijker of Amsterdam . The two-seat sports car featured permanent four-wheel drive and

2948-530: The first full-production four-wheel-drive vehicle for sale in the general marketplace. Due to the ubiquitous World War II Jeep's success, its rugged utilitarianism set the pattern for many four-wheel-drive vehicles to come. Dodge also started production of the civilian 4WD Power Wagon trucks, for the 1946 model year. Both the Willys and the Dodge were developed directly from their WW II predecessors. Equally boxy to

3015-703: The forerunner of the designs that followed from other manufacturers. The automobile press at the time tested the traction of the Eagles and described it as far superior to the Subaru's and that it could beat many so-called off-road vehicles. Four Wheeler magazine concluded that the AMC Eagle was "The beginning of a new generation of cars." The Eagles were popular (particularly in the snowbelt ), had towing capacity, and came in several equipment levels including sport and luxury trims. Two additional models were added in 1981,

3082-400: The front and the rear axles. While a drivetrain that turns all wheels equally would normally fight the driver and cause handling problems, this is not a concern when wheels are slipping. Some designs use gearing to create a small rotational difference that hastens torque transfer. A typical Torsen II differential can deliver up to twice as much torque to the high-traction side before traction

3149-457: The front axle torque from a full-time mode with the 30:70 torque split of the center differential to the 0:100 torque split of the 2WD mode. In 1893, before the establishment of the modern automotive industry in Britain, English engineer Bramah Joseph Diplock patented a four-wheel drive system for a steam-powered traction engine , including four-wheel steering and three differentials , which

3216-404: The inclusion or exclusion of a low-range gear. On-demand AWD systems drive the secondary axle via an active or passive coupling device or "by an independently powered drive system". The standard notes that in some cases, the secondary drive system may also provide the primary vehicle propulsion. An example is a hybrid AWD vehicle where the primary axle is driven by an internal combustion engine and

3283-537: The link to point directly to the intended article. Retrieved from " https://en.wikipedia.org/w/index.php?title=WRX&oldid=1093942528 " Category : Disambiguation pages Hidden categories: Short description is different from Wikidata All article disambiguation pages All disambiguation pages FIA World Rallycross Championship The series currently consists of 12 two-day events driven on closed circuits with mixed surface (mostly asphalt and gravel). Each event consists of: During

3350-415: The military on a large scale, four-wheel drive and all-wheel-drive vehicles had not found their place. The World War II Jeep , originally developed by American Bantam , but mass-produced by Willys and Ford, became the best-known four-wheel-drive vehicle in the world during the war. The American Dodge WC series and Chevrolet G506 4x4 variants were also produced by the hundreds of thousands, as well as

3417-460: The more refined yet still off-road capable luxury 4WD Range Rover in the 1970s. With the acquisition of the "Jeep" name in 1950, Willys had cornered the brand. Its successor, Kaiser Jeep , introduced a revolutionary 4WD wagon called the Wagoneer in 1963. Not only was it technically innovative, with independent front suspension and the first automatic transmission coupled to 4WD, but also it

SECTION 50

#1732780634474

3484-522: The number of driven axles, meaning more gears to cut for all the differentials. Produced up to the war by a few specialized firms with limited capacity, from spring 1942, Ford, Dodge, and Chevrolet joined in fabricating these in a quantity more than a 100-fold greater than in 1939. Although Russia had their own jeep-like vehicle (the GAZ-64) up and running in 1940, a year earlier than the American jeep, in

3551-425: The off-road technology for an extra margin of safety and traction. The Eagle's thick viscous fluid center differential provided a quiet and smooth transfer of power that was directed proportionally to the axle with the greatest traction. This was a true full-time system operating only in four-wheel drive without undue wear on suspension or driveline components. No low range was used in the transfer case. This became

3618-572: The postwar GAZ-69 , and the properly civilian GAZ-M-72, based on the rear-wheel drive GAZ-20 "Victory" and built from 1955 to 1958. Soviet civilian life did not allow the proliferation of civilian products such as the Jeep in North America, but through the 1960s, the technology of Soviet 4×4 vehicles stayed on par with British, German, and American models, even exceeding it in some aspects, and for military purposes just as actively developed, produced, and used. Until "go-anywhere" vehicles were needed for

3685-547: The rest by other licensed manufacturers. Only about 20% of the trucks built were four-wheel drives, but the 4x4s were more often on the front lines. About 11,500 of the Jeffery / Nash Quad trucks were built for similar use between 1913 and 1919. The Quad not only came with four-wheel-drive and four-wheel brakes, but also featured four-wheel steering. The Quad was one of the first successful four-wheel drive vehicles ever to be made, and its production continued for 15 years with

3752-489: The same axle driveshaft, they always have to spin at the same speed relative to each other. When going around a curve, this either forces one of the wheels to slip, if possible, to balance the apparent distance covered, or creates uncomfortable and mechanically stressful wheel hop. To prevent this, the wheels are allowed to turn at different speeds using a mechanical or hydraulic differential . This allows one driveshaft to independently drive two output shafts, axles that go from

3819-412: The secondary axle is driven by an electric motor. When the internal combustion engine is shut off, the secondary, electrically driven axle is the only driven axle. On-demand systems function primarily with only one powered axle until torque is required by the second axle. At that point, either a passive or active coupling sends torque to the secondary axle. In addition to the above primary classifications,

3886-440: The slipping wheel spins faster than the other wheels due to the lower traction at that wheel. Since a differential applies equal torque to each half-shaft, power is reduced at the other wheels, even if they have good traction. This problem can happen in both 2WD and 4WD vehicles, whenever a driven wheel is placed on a surface with little traction or raised off the ground. The simplistic design works acceptably well for 2WD vehicles. It

3953-474: The subcompact SX/4 and Kammback. A manual transmission and a front axle-disconnect feature were also made available for greater fuel economy. During 1981 and 1982, a unique convertible was added to the line. The Eagle's monocoque body was reinforced for the conversion and had a steel targa bar with a removable fiberglass roof section. The Eagle station wagon remained in production for one model year after Chrysler acquired AMC in 1987. Total AMC Eagle production

4020-617: The term is increasingly applied to mean "permanent multiple-wheel drive" on 2×2 , 4×4, 6×6, or 8×8 drive-train systems that include a differential between the front and rear drive shafts. This is often coupled with some sort of antislip technology, increasingly hydraulics-based, that allows differentials to spin at different speeds, but still be capable of transferring the torque from a wheel with poor traction to one with better. Typical AWD systems work well on all surfaces, but are not intended for more extreme off-road use. When used to describe AWD systems in light passenger vehicles, it refers to

4087-416: The various architectures and functions. The terms used by various manufacturers often reflect marketing rather than engineering considerations or significant technical differences between systems. SAE International 's standard J1952 recommends only the term "all-wheel drive" with additional subclassifications that cover all types of AWD/4WD/4x4 systems found on production vehicles. "Four-by-four" or "4×4"

SECTION 60

#1732780634474

4154-853: Was also the first car equipped with a six-cylinder engine, as well as four-wheel braking. Later used as a hill-climb racer, it is now an exhibit in the Louwman Museum (the former Nationaal Automobiel Museum) in the Hague , the Netherlands. Designs for four-wheel drive in America first came from the Twyford Motor Car Company . The Reynolds-Alberta Museum has a four-wheel-drive vehicle, named " Michigan ", from 1905 in unrestored storage. The first four-wheel-drive vehicles to go into mass production were built by (what became)

4221-617: Was developed, and 1,700 RF-40-X-4(USA) trucks were produced in 1938, and 292 TF-40-X-4(USA) in 1939. Starting in 1936, Japanese company Tokyu Kurogane Kogyo built roughly 4,700 four-wheel-drive roadsters, called the Kurogane Type 95 reconnaissance car, used by the Imperial Japanese Army from 1937 until 1944, during the Second Sino-Japanese War . Three different bodystyles were manufactured –

4288-469: Was equipped and finished as a regular passenger automobile. In effect, it was the ancestor of the modern SUV . The luxury AMC or Buick V8 -powered Super Wagoneer produced from 1966 to 1969 raised the bar even higher. Jensen applied the Formula Ferguson (FF) full-time all-wheel-drive system to 318 units of their Jensen FF built from 1966 to 1971, marking the first time 4WD was used in

4355-535: Was planned to be introduced in 2020, but it was announced in August 2018 that the introduction of a fully electric Championship would be delayed until 2021 to allow manufacturers more time to submit an interest to join following the rules change. Instead, the Projekt E class was run in 2020 as a special parallel series using a spec racer. The Projekt E spec electric rallycross car was revealed in September 2019 at

4422-443: Was relatively unchanged during its production through 1991, even after Chrysler 's buyout of AMC. Subaru introduced the category-expanding Leone in 1972, an inexpensive compact station wagon with a light-duty, part-time four-wheel-drive system that could not be engaged on dry pavement. In September, AMC introduced Quadra Trac full-time AWD for the 1973 model year Jeep Cherokee and Wagoneer. Due to full-time AWD, which relieved

4489-425: Was subsequently built. The development also incorporated Bramah's Pedrail wheel system in what was one of the first four-wheel drive automobiles to display an intentional ability to travel on challenging road surfaces. It stemmed from Bramagh's previous idea of developing an engine that would reduce the amount of damage to public roads. Ferdinand Porsche designed and built a four-wheel-driven electric vehicle for

#473526