162-422: Tungsten (also called wolfram ) is a chemical element ; it has symbol W and atomic number 74. It is a rare metal found naturally on Earth almost exclusively as compounds with other elements. It was identified as a distinct element in 1781 and first isolated as a metal in 1783. Its important ores include scheelite and wolframite , the latter lending the element its alternative name. The free element
324-424: A body-centered cubic structure and is the more stable form. The structure of the β phase is called A15 cubic ; it is metastable , but can coexist with the α phase at ambient conditions owing to non-equilibrium synthesis or stabilization by impurities. Contrary to the α phase which crystallizes in isometric grains, the β form exhibits a columnar habit . The α phase has one third of the electrical resistivity and
486-738: A pure element . In chemistry, a pure element means a substance whose atoms all (or in practice almost all) have the same atomic number, or number of protons . Nuclear scientists, however, define a pure element as one that consists of only one isotope. For example, a copper wire is 99.99% chemically pure if 99.99% of its atoms are copper, with 29 protons each. However it is not isotopically pure since ordinary copper consists of two stable isotopes, 69% Cu and 31% Cu, with different numbers of neutrons. However, pure gold would be both chemically and isotopically pure, since ordinary gold consists only of one isotope, Au. Atoms of chemically pure elements may bond to each other chemically in more than one way, allowing
648-432: A sextuple bond between tungsten atoms — the highest known bond order among stable atoms. In 1781, Carl Wilhelm Scheele discovered that a new acid , tungstic acid , could be made from scheelite (at the time called tungsten). Scheele and Torbern Bergman suggested that it might be possible to obtain a new metal by reducing this acid. In 1783, José and Fausto Elhuyar found an acid made from wolframite that
810-412: A BOS process is manufactured in one-twelfth the time. Today, electric arc furnaces (EAF) are a common method of reprocessing scrap metal to create new steel. They can also be used for converting pig iron to steel, but they use a lot of electrical energy (about 440 kWh per metric ton), and are thus generally only economical when there is a plentiful supply of cheap electricity. The steel industry
972-497: A US court rejected General Electric 's attempt to patent it, overturning U.S. patent 1,082,933 granted in 1913 to William D. Coolidge . It is suggested that remnants of wolfram have been found in what may have been the garden of the astronomer/alchemist Tycho Brahe The name tungsten (which means ' heavy stone ' in Swedish and was the old Swedish name for the mineral scheelite and other minerals of similar density)
1134-531: A brittle alloy commonly called pig iron . Alloy steel is steel to which other alloying elements have been intentionally added to modify the characteristics of steel. Common alloying elements include: manganese , nickel , chromium , molybdenum , boron , titanium , vanadium , tungsten , cobalt , and niobium . Additional elements, most frequently considered undesirable, are also important in steel: phosphorus , sulphur , silicon , and traces of oxygen , nitrogen , and copper . Plain carbon-iron alloys with
1296-713: A carbon-intermediate steel by the 1st century AD. There is evidence that carbon steel was made in Western Tanzania by the ancestors of the Haya people as early as 2,000 years ago by a complex process of "pre-heating" allowing temperatures inside a furnace to reach 1300 to 1400 °C. Evidence of the earliest production of high carbon steel in South Asia is found in Kodumanal in Tamil Nadu ,
1458-444: A change of volume. In this case, expansion occurs. Internal stresses from this expansion generally take the form of compression on the crystals of martensite and tension on the remaining ferrite, with a fair amount of shear on both constituents. If quenching is done improperly, the internal stresses can cause a part to shatter as it cools. At the very least, they cause internal work hardening and other microscopic imperfections. It
1620-564: A colorless gas. At around 250 °C it will react with chlorine or bromine, and under certain hot conditions will react with iodine. Finely divided tungsten is pyrophoric . The most common formal oxidation state of tungsten is +6, but it exhibits all oxidation states from −2 to +6. Tungsten typically combines with oxygen to form the yellow tungstic oxide , WO 3 , which dissolves in aqueous alkaline solutions to form tungstate ions, WO 4 . Tungsten carbides (W 2 C and WC) are produced by heating powdered tungsten with carbon. W 2 C
1782-549: A considerable amount of time. (See element naming controversy ). Precursors of such controversies involved the nationalistic namings of elements in the late 19th century. For example, lutetium was named in reference to Paris, France. The Germans were reluctant to relinquish naming rights to the French, often calling it cassiopeium . Similarly, the British discoverer of niobium originally named it columbium , in reference to
SECTION 10
#17327932920461944-426: A different atom such as phosphorus in place of the two central hydrogens in metatungstate produces a wide variety of heteropoly acids, such as phosphotungstic acid H 3 PW 12 O 40 . Tungsten trioxide can form intercalation compounds with alkali metals. These are known as bronzes ; an example is sodium tungsten bronze . In gaseous form, tungsten forms the diatomic species W 2 . These molecules feature
2106-477: A different element in nuclear reactions , which change an atom's atomic number. Historically, the term "chemical element" meant a substance that cannot be broken down into constituent substances by chemical reactions, and for most practical purposes this definition still has validity. There was some controversy in the 1920s over whether isotopes deserved to be recognized as separate elements if they could be separated by chemical means. The term "(chemical) element"
2268-428: A ferrite BCC crystal form, but at higher carbon content it takes a body-centred tetragonal (BCT) structure. There is no thermal activation energy for the transformation from austenite to martensite. There is no compositional change so the atoms generally retain their same neighbours. Martensite has a lower density (it expands during the cooling) than does austenite, so that the transformation between them results in
2430-652: A few decay products, to have been differentiated from other elements. Most recently, the synthesis of element 118 (since named oganesson ) was reported in October 2006, and the synthesis of element 117 ( tennessine ) was reported in April 2010. Of these 118 elements, 94 occur naturally on Earth. Six of these occur in extreme trace quantities: technetium , atomic number 43; promethium , number 61; astatine , number 85; francium , number 87; neptunium , number 93; and plutonium , number 94. These 94 elements have been detected in
2592-529: A few elements, such as silver and gold , are found uncombined as relatively pure native element minerals . Nearly all other naturally occurring elements occur in the Earth as compounds or mixtures. Air is mostly a mixture of molecular nitrogen and oxygen , though it does contain compounds including carbon dioxide and water , as well as atomic argon , a noble gas which is chemically inert and therefore does not undergo chemical reactions. The history of
2754-417: A half-life of (1.8 ± 0.2) × 10 years; on average, this yields about two alpha decays of W per gram of natural tungsten per year. This rate is equivalent to a specific activity of roughly 63 micro- becquerel per kilogram. This rate of decay is orders of magnitude lower than that observed in carbon or potassium as found on earth, which likewise contain small amounts of long-lived radioactive isotopes. Bismuth
2916-583: A hard oxide forms on the metal surface; this is known as stainless steel . Tungsten slows the formation of cementite , keeping carbon in the iron matrix and allowing martensite to preferentially form at slower quench rates, resulting in high-speed steel . The addition of lead and sulphur decrease grain size, thereby making the steel easier to turn , but also more brittle and prone to corrosion. Such alloys are nevertheless frequently used for components such as nuts, bolts, and washers in applications where toughness and corrosion resistance are not paramount. For
3078-445: A hard but brittle martensitic structure. The steel is then tempered, which is just a specialized type of annealing, to reduce brittleness. In this application the annealing (tempering) process transforms some of the martensite into cementite, or spheroidite and hence it reduces the internal stresses and defects. The result is a more ductile and fracture-resistant steel. When iron is smelted from its ore, it contains more carbon than
3240-516: A high melting point , elemental tungsten is used in many high-temperature applications, such as incandescent light bulb , cathode-ray tube , and vacuum tube filaments, heating elements , and rocket engine nozzles. Its high melting point also makes tungsten suitable for aerospace and high-temperature uses such as electrical, heating, and welding applications, notably in the gas tungsten arc welding process (also called tungsten inert gas (TIG) welding). Chemical element A chemical element
3402-434: A higher than 2.1% carbon content are known as cast iron . With modern steelmaking techniques such as powder metal forming, it is possible to make very high-carbon (and other alloy material) steels, but such are not common. Cast iron is not malleable even when hot, but it can be formed by casting as it has a lower melting point than steel and good castability properties. Certain compositions of cast iron, while retaining
SECTION 20
#17327932920463564-626: A much lower superconducting transition temperature T C relative to the β phase: ca. 0.015 K vs. 1–4 K; mixing the two phases allows obtaining intermediate T C values. The T C value can also be raised by alloying tungsten with another metal (e.g. 7.9 K for W- Tc ). Such tungsten alloys are sometimes used in low-temperature superconducting circuits. Naturally occurring tungsten consists of four stable isotopes (W, W, W, and W) and one very long-lived radioisotope, W. Theoretically, all five can decay into isotopes of element 72 ( hafnium ) by alpha emission , but only W has been observed to do so, with
3726-412: A narrow range of concentrations of mixtures of carbon and iron that make steel, several different metallurgical structures, with very different properties can form. Understanding such properties is essential to making quality steel. At room temperature , the most stable form of pure iron is the body-centred cubic (BCC) structure called alpha iron or α-iron. It is a fairly soft metal that can dissolve only
3888-500: A pressure of 1 bar and a given temperature (typically at 298.15K). However, for phosphorus, the reference state is white phosphorus even though it is not the most stable allotrope, and the reference state for carbon is graphite, because the structure of graphite is more stable than that of the other allotropes. In thermochemistry , an element is defined to have an enthalpy of formation of zero in its reference state. Several kinds of descriptive categorizations can be applied broadly to
4050-483: A pressure of one atmosphere, are commonly used in characterizing the various elements. While known for most elements, either or both of these measurements is still undetermined for some of the radioactive elements available in only tiny quantities. Since helium remains a liquid even at absolute zero at atmospheric pressure, it has only a boiling point, and not a melting point, in conventional presentations. The density at selected standard temperature and pressure (STP)
4212-533: A range of oxidation states. Notable examples include the trigonal prismatic W(CH 3 ) 6 and octahedral W(CO) 6 . The world's reserves of tungsten are 3,200,000 tonnes; they are mostly located in China (1,800,000 t), Canada (290,000 t), Russia (160,000 t), Vietnam (95,000 t) and Bolivia . As of 2017, China, Vietnam and Russia are the leading suppliers with 79,000, 7,200 and 3,100 tonnes, respectively. Canada had ceased production in late 2015 due to
4374-484: A sharp blow. The hardness and heat resistance of tungsten can contribute to useful alloys . A good example is high-speed steel , which can contain as much as 18% tungsten. Tungsten's high melting point makes tungsten a good material for applications like rocket nozzles , for example in the UGM-27 Polaris submarine-launched ballistic missile . Tungsten alloys are used in a wide range of applications, including
4536-485: A shortage of tungsten used in the shell core, caused in part by the Wolfram Crisis , limited their use. Tungsten has also been used in dense inert metal explosives , which use it as dense powder to reduce collateral damage while increasing the lethality of explosives within a small radius. Tungsten(IV) sulfide is a high temperature lubricant and is a component of catalysts for hydrodesulfurization . MoS 2
4698-534: A small concentration of carbon, no more than 0.005% at 0 °C (32 °F) and 0.021 wt% at 723 °C (1,333 °F). The inclusion of carbon in alpha iron is called ferrite . At 910 °C, pure iron transforms into a face-centred cubic (FCC) structure, called gamma iron or γ-iron. The inclusion of carbon in gamma iron is called austenite. The more open FCC structure of austenite can dissolve considerably more carbon, as much as 2.1%, (38 times that of ferrite) carbon at 1,148 °C (2,098 °F), which reflects
4860-456: A small group, (the metalloids ), having intermediate properties and often behaving as semiconductors . A more refined classification is often shown in colored presentations of the periodic table. This system restricts the terms "metal" and "nonmetal" to only certain of the more broadly defined metals and nonmetals, adding additional terms for certain sets of the more broadly viewed metals and nonmetals. The version of this classification used in
5022-453: A steel's final rolling, it is heat treated for strength; however, this is relatively rare. Steel was known in antiquity and was produced in bloomeries and crucibles . The earliest known production of steel is seen in pieces of ironware excavated from an archaeological site in Anatolia ( Kaman-Kalehöyük ) which are nearly 4,000 years old, dating from 1800 BC. Wootz steel
Tungsten - Misplaced Pages Continue
5184-477: A subsequent step. Other materials are often added to the iron/carbon mixture to produce steel with the desired properties. Nickel and manganese in steel add to its tensile strength and make the austenite form of the iron-carbon solution more stable, chromium increases hardness and melting temperature, and vanadium also increases hardness while making it less prone to metal fatigue . To inhibit corrosion, at least 11% chromium can be added to steel so that
5346-492: A tungsten bar with gold, which has been observed since the 1980s, or taking an existing gold bar, drilling holes, and replacing the removed gold with tungsten rods. The densities are not exactly the same, and other properties of gold and tungsten differ, but gold-plated tungsten will pass superficial tests. Gold-plated tungsten is available commercially from China (the main source of tungsten), both in jewelry and as bars. Because it retains its strength at high temperatures and has
5508-474: A whole number. For example, the relative atomic mass of chlorine is 35.453 u, which differs greatly from a whole number as it is an average of about 76% chlorine-35 and 24% chlorine-37. Whenever a relative atomic mass value differs by more than ~1% from a whole number, it is due to this averaging effect, as significant amounts of more than one isotope are naturally present in a sample of that element. Chemists and nuclear scientists have different definitions of
5670-672: Is continuously cast into long slabs, cut and shaped into bars and extrusions and heat treated to produce a final product. Today, approximately 96% of steel is continuously cast, while only 4% is produced as ingots. The ingots are then heated in a soaking pit and hot rolled into slabs, billets , or blooms . Slabs are hot or cold rolled into sheet metal or plates. Billets are hot or cold rolled into bars, rods, and wire. Blooms are hot or cold rolled into structural steel , such as I-beams and rails . In modern steel mills these processes often occur in one assembly line , with ore coming in and finished steel products coming out. Sometimes after
5832-414: Is hypoallergenic , and is harder than gold alloys (though not as hard as tungsten carbide), making it useful for rings that will resist scratching, especially in designs with a brushed finish . Because the density is so similar to that of gold (tungsten is only 0.36% less dense), and its price of the order of one-thousandth, tungsten can also be used in counterfeiting of gold bars , such as by plating
5994-474: Is selective laser melting , which is a form of 3D printing and allows creating complex three-dimensional shapes. Tungsten is mainly used in the production of hard materials based on tungsten carbide (WC), one of the hardest carbides . WC is an efficient electrical conductor , but W 2 C is less so. WC is used to make wear-resistant abrasives , and "carbide" cutting tools such as knives, drills, circular saws , dies , milling and turning tools used by
6156-404: Is 10 (for tin , element 50). The mass number of an element, A , is the number of nucleons (protons and neutrons) in the atomic nucleus. Different isotopes of a given element are distinguished by their mass number, which is written as a superscript on the left hand side of the chemical symbol (e.g., U). The mass number is always an integer and has units of "nucleons". Thus, magnesium-24 (24
6318-883: Is a chemical substance whose atoms all have the same number of protons . The number of protons is called the atomic number of that element. For example, oxygen has an atomic number of 8, meaning each oxygen atom has 8 protons in its nucleus. Atoms of the same element can have different numbers of neutrons in their nuclei, known as isotopes of the element. Two or more atoms can combine to form molecules . Some elements are formed from molecules of identical atoms , e. g. atoms of hydrogen (H) form diatomic molecules (H 2 ). Chemical compounds are substances made of atoms of different elements; they can have molecular or non-molecular structure. Mixtures are materials containing different chemical substances; that means (in case of molecular substances) that they contain different types of molecules. Atoms of one element can be transformed into atoms of
6480-606: Is a mixture of C (about 98.9%), C (about 1.1%) and about 1 atom per trillion of C. Most (54 of 94) naturally occurring elements have more than one stable isotope. Except for the isotopes of hydrogen (which differ greatly from each other in relative mass—enough to cause chemical effects), the isotopes of a given element are chemically nearly indistinguishable. All elements have radioactive isotopes (radioisotopes); most of these radioisotopes do not occur naturally. Radioisotopes typically decay into other elements via alpha decay , beta decay , or inverse beta decay ; some isotopes of
6642-406: Is a dimensionless number equal to the atomic mass divided by the atomic mass constant , which equals 1 Da. In general, the mass number of a given nuclide differs in value slightly from its relative atomic mass, since the mass of each proton and neutron is not exactly 1 Da; since the electrons contribute a lesser share to the atomic mass as neutron number exceeds proton number; and because of
Tungsten - Misplaced Pages Continue
6804-636: Is also very reusable: it is one of the world's most-recycled materials, with a recycling rate of over 60% globally . The noun steel originates from the Proto-Germanic adjective * * stahliją or * * stakhlijan 'made of steel', which is related to * * stahlaz or * * stahliją 'standing firm'. The carbon content of steel is between 0.02% and 2.14% by weight for plain carbon steel ( iron - carbon alloys ). Too little carbon content leaves (pure) iron quite soft, ductile, and weak. Carbon contents higher than those of steel make
6966-416: Is always the main element in steel, but many other elements may be present or added. Stainless steels , which are resistant to corrosion and oxidation , typically need an additional 11% chromium . Iron is the base metal of steel. Depending on the temperature, it can take two crystalline forms (allotropic forms): body-centred cubic and face-centred cubic . The interaction of the allotropes of iron with
7128-432: Is an alloy of iron and carbon with improved strength and fracture resistance compared to other forms of iron. Because of its high tensile strength and low cost, steel is one of the most commonly manufactured materials in the world. Steel is used in buildings, as concrete reinforcing rods, in bridges, infrastructure, tools, ships, trains, cars, bicycles, machines, electrical appliances, furniture, and weapons. Iron
7290-644: Is an intrinsically brittle and hard material (under standard conditions, when uncombined), making it difficult to work into metal . However, pure single-crystalline tungsten is more ductile and can be cut with a hard-steel hacksaw . Tungsten occurs in many alloys, which have numerous applications, including incandescent light bulb filaments, X-ray tubes , electrodes in gas tungsten arc welding , superalloys , and radiation shielding . Tungsten's hardness and high density make it suitable for military applications in penetrating projectiles . Tungsten compounds are often used as industrial catalysts . Its largest use
7452-812: Is an ongoing area of scientific study. The lightest elements are hydrogen and helium , both created by Big Bang nucleosynthesis in the first 20 minutes of the universe in a ratio of around 3:1 by mass (or 12:1 by number of atoms), along with tiny traces of the next two elements, lithium and beryllium . Almost all other elements found in nature were made by various natural methods of nucleosynthesis . On Earth, small amounts of new atoms are naturally produced in nucleogenic reactions, or in cosmogenic processes, such as cosmic ray spallation . New atoms are also naturally produced on Earth as radiogenic daughter isotopes of ongoing radioactive decay processes such as alpha decay , beta decay , spontaneous fission , cluster decay , and other rarer modes of decay. Of
7614-460: Is based on a Latin or other traditional word, for example adopting "gold" rather than "aurum" as the name for the 79th element (Au). IUPAC prefers the British spellings " aluminium " and "caesium" over the U.S. spellings "aluminum" and "cesium", and the U.S. "sulfur" over British "sulphur". However, elements that are practical to sell in bulk in many countries often still have locally used national names, and countries whose national language does not use
7776-403: Is common for quench cracks to form when steel is water quenched, although they may not always be visible. There are many types of heat treating processes available to steel. The most common are annealing , quenching , and tempering . Annealing is the process of heating the steel to a sufficiently high temperature to relieve local internal stresses. It does not create a general softening of
7938-403: Is desirable. To become steel, it must be reprocessed to reduce the carbon to the correct amount, at which point other elements can be added. In the past, steel facilities would cast the raw steel product into ingots which would be stored until use in further refinement processes that resulted in the finished product. In modern facilities, the initial product is close to the final composition and
8100-405: Is extracted from iron ore by removing the oxygen through its combination with a preferred chemical partner such as carbon which is then lost to the atmosphere as carbon dioxide. This process, known as smelting , was first applied to metals with lower melting points, such as tin , which melts at about 250 °C (482 °F), and copper , which melts at about 1,100 °C (2,010 °F), and
8262-408: Is heat treated to contain both a ferritic and martensitic microstructure to produce a formable, high strength steel. Transformation Induced Plasticity (TRIP) steel involves special alloying and heat treatments to stabilize amounts of austenite at room temperature in normally austenite-free low-alloy ferritic steels. By applying strain, the austenite undergoes a phase transition to martensite without
SECTION 50
#17327932920468424-474: Is heated with hydrogen or carbon to produce powdered tungsten. Because of tungsten's high melting point, it is not commercially feasible to cast tungsten ingots . Instead, powdered tungsten is mixed with small amounts of powdered nickel or other metals, and sintered . During the sintering process, the nickel diffuses into the tungsten, producing an alloy. Tungsten can also be extracted by hydrogen reduction of WF 6 : or pyrolytic decomposition : Tungsten
8586-482: Is in tungsten carbide , a wear-resistant metal used in metalworking , mining , and construction . About 50% of tungsten is used in tungsten carbide, with the remaining major use being alloys and steels: less than 10% is used other compounds. Tungsten is the only metal in the third transition series that is known to occur in biomolecules , being found in a few species of bacteria and archaea . However, tungsten interferes with molybdenum and copper metabolism and
8748-640: Is more commonly used for such applications. Tungsten oxides are used in ceramic glazes and calcium / magnesium tungstates are used widely in fluorescent lighting . Crystal tungstates are used as scintillation detectors in nuclear physics and nuclear medicine . Other salts that contain tungsten are used in the chemical and tanning industries. Tungsten oxide (WO 3 ) is incorporated into selective catalytic reduction (SCR) catalysts found in coal-fired power plants. These catalysts convert nitrogen oxides ( NO x ) to nitrogen (N 2 ) and water (H 2 O) using ammonia (NH 3 ). The tungsten oxide helps with
8910-496: Is not traded as a futures contract and cannot be tracked on exchanges like the London Metal Exchange . The tungsten industry often uses independent pricing references such as Argus Media or Metal Bulletin as a basis for contracts. The prices are usually quoted for tungsten concentrate or WO 3 . Approximately half of the tungsten is consumed for the production of hard materials – namely tungsten carbide – with
9072-691: Is often considered an indicator of economic progress, because of the critical role played by steel in infrastructural and overall economic development . In 1980, there were more than 500,000 U.S. steelworkers. By 2000, the number of steelworkers had fallen to 224,000. The economic boom in China and India caused a massive increase in the demand for steel. Between 2000 and 2005, world steel demand increased by 6%. Since 2000, several Indian and Chinese steel firms have expanded to meet demand, such as Tata Steel (which bought Corus Group in 2007), Baosteel Group and Shagang Group . As of 2017 , though, ArcelorMittal
9234-436: Is often used in characterizing the elements. Density is often expressed in grams per cubic centimetre (g/cm ). Since several elements are gases at commonly encountered temperatures, their densities are usually stated for their gaseous forms; when liquefied or solidified, the gaseous elements have densities similar to those of the other elements. When an element has allotropes with different densities, one representative allotrope
9396-551: Is one of the world's most-recycled materials, with a recycling rate of over 60% globally; in the United States alone, over 82,000,000 metric tons (81,000,000 long tons; 90,000,000 short tons) were recycled in the year 2008, for an overall recycling rate of 83%. As more steel is produced than is scrapped, the amount of recycled raw materials is about 40% of the total of steel produced - in 2016, 1,628,000,000 tonnes (1.602 × 10 long tons; 1.795 × 10 short tons) of crude steel
9558-663: Is problematic even in depleted form, or where uranium's additional pyrophoric properties are not desired (for example, in ordinary small arms bullets designed to penetrate body armor). Similarly, tungsten alloys have also been used in shells , grenades , and missiles , to create supersonic shrapnel. Germany used tungsten during World War II to produce shells for anti-tank gun designs using the Gerlich squeeze bore principle to achieve very high muzzle velocity and enhanced armor penetration from comparatively small caliber and light weight field artillery. The weapons were highly effective but
9720-421: Is remarkable for its robustness, especially the fact that it has the highest melting point of all known elements, melting at 3,422 °C (6,192 °F; 3,695 K). It also has the highest boiling point , at 5,930 °C (10,706 °F; 6,203 K). Its density is 19.254 g/cm, comparable with that of uranium and gold , and much higher (about 1.7 times) than that of lead . Polycrystalline tungsten
9882-425: Is resistant to chemical attack, although it reacts strongly with chlorine to form tungsten hexachloride (WCl 6 ). In aqueous solution, tungstate gives the heteropoly acids and polyoxometalate anions under neutral and acidic conditions. As tungstate is progressively treated with acid, it first yields the soluble, metastable "paratungstate A" anion , W 7 O 24 , which over time converts to
SECTION 60
#173279329204610044-447: Is somewhat toxic to most forms of animal life. In its raw form, tungsten is a hard steel-grey metal that is often brittle and hard to work . Purified, monocrystalline tungsten retains its hardness (which exceeds that of many steels), and becomes malleable enough that it can be worked easily. It is worked by forging , drawing , or extruding but it is more commonly formed by sintering . Of all metals in pure form, tungsten has
10206-635: Is strictly regulated by the Chinese Government, which fights illegal mining and excessive pollution originating from mining and refining processes. There is a large deposit of tungsten ore on the edge of Dartmoor in the United Kingdom , which was exploited during World War I and World War II as the Hemerdon Mine . Following increases in tungsten prices, this mine was reactivated in 2014, but ceased activities in 2018. Within
10368-426: Is the mass number) is an atom with 24 nucleons (12 protons and 12 neutrons). Whereas the mass number simply counts the total number of neutrons and protons and is thus an integer, the atomic mass of a particular isotope (or "nuclide") of the element is the mass of a single atom of that isotope, and is typically expressed in daltons (symbol: Da), or universal atomic mass units (symbol: u). Its relative atomic mass
10530-547: Is the world's largest steel producer . In 2005, the British Geological Survey stated China was the top steel producer with about one-third of the world share; Japan , Russia , and the United States were second, third, and fourth, respectively, according to the survey. The large production capacity of steel results also in a significant amount of carbon dioxide emissions inherent related to
10692-532: Is typically selected in summary presentations, while densities for each allotrope can be stated where more detail is provided. For example, the three familiar allotropes of carbon ( amorphous carbon , graphite , and diamond ) have densities of 1.8–2.1, 2.267, and 3.515 g/cm , respectively. The elements studied to date as solid samples have eight kinds of crystal structures : cubic , body-centered cubic , face-centered cubic, hexagonal , monoclinic , orthorhombic , rhombohedral , and tetragonal . For some of
10854-543: Is used in English, French, and many other languages as the name of the element, but wolfram (or volfram ) is used in most European (especially Germanic and Slavic) languages and is derived from the mineral wolframite , which is the origin of the chemical symbol W . The name wolframite is derived from German wolf rahm ( ' wolf soot, wolf cream ' ), the name given to tungsten by Johan Gottschalk Wallerius in 1747. This, in turn, derives from Latin lupi spuma ,
11016-417: Is used in two different but closely related meanings: it can mean a chemical substance consisting of a single kind of atoms, or it can mean that kind of atoms as a component of various chemical substances. For example, molecules of water (H 2 O) contain atoms of hydrogen (H) and oxygen (O), so water can be said as a compound consisting of the elements hydrogen (H) and oxygen (O) even though it does not contain
11178-429: Is very strong; fullerenes , which have nearly spherical shapes; and carbon nanotubes , which are tubes with a hexagonal structure (even these may differ from each other in electrical properties). The ability of an element to exist in one of many structural forms is known as 'allotropy'. The reference state of an element is defined by convention, usually as the thermodynamically most stable allotrope and physical state at
11340-590: Is widely used. For example, the French chemical terminology distinguishes élément chimique (kind of atoms) and corps simple (chemical substance consisting of a single kind of atoms); the Russian chemical terminology distinguishes химический элемент and простое вещество . Almost all baryonic matter in the universe is composed of elements (among rare exceptions are neutron stars ). When different elements undergo chemical reactions, atoms are rearranged into new compounds held together by chemical bonds . Only
11502-708: The Carrock mine from the German owned Cumbrian Mining Company and, during World War I , restrict German access elsewhere. In World War II , tungsten played a more significant role in background political dealings. Portugal, as the main European source of the element, was put under pressure from both sides , because of its deposits of wolframite ore at Panasqueira . Tungsten's desirable properties such as resistance to high temperatures, its hardness and density, and its strengthening of alloys made it an important raw material for
11664-597: The EU , the Austrian Felbertal scheelite deposit is one of the few producing tungsten mines. Portugal is one of Europe's main tungsten producers, with 121 kt of contained tungsten in mineral concentrates from 1910 to 2020, accounting for roughly 3.3% of the global production. Tungsten is considered to be a conflict mineral due to the unethical mining practices observed in the Democratic Republic of
11826-655: The Golconda area in Andhra Pradesh and Karnataka , regions of India , as well as in Samanalawewa and Dehigaha Alakanda, regions of Sri Lanka . This came to be known as wootz steel , produced in South India by about the sixth century BC and exported globally. The steel technology existed prior to 326 BC in the region as they are mentioned in literature of Sangam Tamil , Arabic, and Latin as
11988-489: The International Union of Pure and Applied Chemistry (IUPAC) had recognized a total of 118 elements. The first 94 occur naturally on Earth , and the remaining 24 are synthetic elements produced in nuclear reactions. Save for unstable radioactive elements (radioelements) which decay quickly, nearly all elements are available industrially in varying amounts. The discovery and synthesis of further new elements
12150-583: The Latin alphabet are likely to use the IUPAC element names. According to IUPAC, element names are not proper nouns; therefore, the full name of an element is not capitalized in English, even if derived from a proper noun , as in californium and einsteinium . Isotope names are also uncapitalized if written out, e.g., carbon-12 or uranium-235 . Chemical element symbols (such as Cf for californium and Es for einsteinium), are always capitalized (see below). In
12312-584: The New World . It was used extensively as such by American publications before the international standardization (in 1950). Before chemistry became a science , alchemists designed arcane symbols for both metals and common compounds. These were however used as abbreviations in diagrams or procedures; there was no concept of atoms combining to form molecules . With his advances in the atomic theory of matter, John Dalton devised his own simpler symbols, based on circles, to depict molecules. Steel Steel
12474-599: The cementation process was described in a treatise published in Prague in 1574 and was in use in Nuremberg from 1601. A similar process for case hardening armour and files was described in a book published in Naples in 1589. The process was introduced to England in about 1614 and used to produce such steel by Sir Basil Brooke at Coalbrookdale during the 1610s. The raw material for this process were bars of iron. During
12636-419: The hardness , quenching behaviour , need for annealing , tempering behaviour , yield strength , and tensile strength of the resulting steel. The increase in steel's strength compared to pure iron is possible only by reducing iron's ductility. Steel was produced in bloomery furnaces for thousands of years, but its large-scale, industrial use began only after more efficient production methods were devised in
12798-423: The kinetic isotope effect is significant). Thus, all carbon isotopes have nearly identical chemical properties because they all have six electrons, even though they may have 6 to 8 neutrons. That is why atomic number, rather than mass number or atomic weight , is considered the identifying characteristic of an element. The symbol for atomic number is Z . Isotopes are atoms of the same element (that is, with
12960-405: The nuclear binding energy and electron binding energy. For example, the atomic mass of chlorine-35 to five significant digits is 34.969 Da and that of chlorine-37 is 36.966 Da. However, the relative atomic mass of each isotope is quite close to its mass number (always within 1%). The only isotope whose atomic mass is exactly a natural number is C, which has a mass of 12 Da; because
13122-445: The 17th century, it was realized that the best steel came from oregrounds iron of a region north of Stockholm , Sweden. This was still the usual raw material source in the 19th century, almost as long as the process was used. Crucible steel is steel that has been melted in a crucible rather than having been forged , with the result that it is more homogeneous. Most previous furnaces could not reach high enough temperatures to melt
13284-419: The 17th century, the first step in European steel production has been the smelting of iron ore into pig iron in a blast furnace . Originally employing charcoal, modern methods use coke , which has proven more economical. In these processes, pig iron made from raw iron ore was refined (fined) in a finery forge to produce bar iron , which was then used in steel-making. The production of steel by
13446-626: The 17th century, with the introduction of the blast furnace and production of crucible steel . This was followed by the Bessemer process in England in the mid-19th century, and then by the open-hearth furnace . With the invention of the Bessemer process, a new era of mass-produced steel began. Mild steel replaced wrought iron . The German states were the major steel producers in Europe in
13608-481: The 19th century. American steel production was centred in Pittsburgh , Bethlehem, Pennsylvania , and Cleveland until the late 20th century. Currently, world steel production is centered in China, which produced 54% of the world's steel in 2023. Further refinements in the process, such as basic oxygen steelmaking (BOS), largely replaced earlier methods by further lowering the cost of production and increasing
13770-638: The 94 naturally occurring elements, those with atomic numbers 1 through 82 each have at least one stable isotope (except for technetium , element 43 and promethium , element 61, which have no stable isotopes). Isotopes considered stable are those for which no radioactive decay has yet been observed. Elements with atomic numbers 83 through 94 are unstable to the point that radioactive decay of all isotopes can be detected. Some of these elements, notably bismuth (atomic number 83), thorium (atomic number 90), and uranium (atomic number 92), have one or more isotopes with half-lives long enough to survive as remnants of
13932-608: The Arabs from Persia, who took it from India. It was originally created from several different materials including various trace elements , apparently ultimately from the writings of Zosimos of Panopolis . In 327 BC, Alexander the Great was rewarded by the defeated King Porus , not with gold or silver but with 30 pounds of steel. A recent study has speculated that carbon nanotubes were included in its structure, which might explain some of its legendary qualities, though, given
14094-469: The Congo . South Korea's Sangdong mine , one of the world's largest tungsten mines with 7,890,000 tonnes of high-grade tungsten reportedly buried, was closed in 1994 due to low profitability but has since re-registered mining rights and is scheduled to resume activities in 2024. Tungsten is extracted from its ores in several stages. The ore is eventually converted to tungsten(VI) oxide (WO 3 ), which
14256-487: The French, Italians, Greeks, Portuguese and Poles prefer "azote/azot/azoto" (from roots meaning "no life") for "nitrogen". For purposes of international communication and trade, the official names of the chemical elements both ancient and more recently recognized are decided by the International Union of Pure and Applied Chemistry (IUPAC), which has decided on a sort of international English language, drawing on traditional English names even when an element's chemical symbol
14418-470: The Linz-Donawitz process of basic oxygen steelmaking (BOS), developed in 1952, and other oxygen steel making methods. Basic oxygen steelmaking is superior to previous steelmaking methods because the oxygen pumped into the furnace limited impurities, primarily nitrogen, that previously had entered from the air used, and because, with respect to the open hearth process, the same quantity of steel from
14580-416: The aerospace and automotive industries and radiation shielding. Superalloys containing tungsten, such as Hastelloy and Stellite , are used in turbine blades and wear-resistant parts and coatings. Tungsten's heat resistance makes it useful in arc welding applications when combined with another highly-conductive metal such as silver or copper. The silver or copper provides the necessary conductivity and
14742-401: The alloying elements, primarily carbon, gives steel and cast iron their range of unique properties. In pure iron, the crystal structure has relatively little resistance to the iron atoms slipping past one another, and so pure iron is quite ductile , or soft and easily formed. In steel, small amounts of carbon, other elements, and inclusions within the iron act as hardening agents that prevent
14904-420: The arms industry, both as a constituent of weapons and equipment and employed in production itself, e.g., in tungsten carbide cutting tools for machining steel. Now tungsten is used in many more applications such as aircraft and motorsport ballast weights, darts, anti-vibration tooling, and sporting equipment. Tungsten is unique amongst the elements in that it has been the subject of patent proceedings. In 1928,
15066-487: The atomic masses of the elements (their atomic weights or atomic masses) do not always increase monotonically with their atomic numbers. The naming of various substances now known as elements precedes the atomic theory of matter, as names were given locally by various cultures to various minerals, metals, compounds, alloys, mixtures, and other materials, though at the time it was not known which chemicals were elements and which compounds. As they were identified as elements,
15228-436: The austenite grain boundaries until the percentage of carbon in the grains has decreased to the eutectoid composition (0.8% carbon), at which point the pearlite structure forms. For steels that have less than 0.8% carbon (hypoeutectoid), ferrite will first form within the grains until the remaining composition rises to 0.8% of carbon, at which point the pearlite structure will form. No large inclusions of cementite will form at
15390-471: The austenite is for it to precipitate out of solution as cementite , leaving behind a surrounding phase of BCC iron called ferrite with a small percentage of carbon in solution. The two, cementite and ferrite, precipitate simultaneously producing a layered structure called pearlite , named for its resemblance to mother of pearl . In a hypereutectoid composition (greater than 0.8% carbon), the carbon will first precipitate out as large inclusions of cementite at
15552-494: The boundaries in hypoeutectoid steel. The above assumes that the cooling process is very slow, allowing enough time for the carbon to migrate. As the rate of cooling is increased the carbon will have less time to migrate to form carbide at the grain boundaries but will have increasingly large amounts of pearlite of a finer and finer structure within the grains; hence the carbide is more widely dispersed and acts to prevent slip of defects within those grains, resulting in hardening of
15714-413: The chemical substances (di)hydrogen (H 2 ) and (di)oxygen (O 2 ), as H 2 O molecules are different from H 2 and O 2 molecules. For the meaning "chemical substance consisting of a single kind of atoms", the terms "elementary substance" and "simple substance" have been suggested, but they have not gained much acceptance in English chemical literature, whereas in some other languages their equivalent
15876-447: The closure of its sole tungsten mine. Meanwhile, Vietnam had significantly increased its output in the 2010s, owing to the major optimization of its domestic refining operations, and overtook Russia and Bolivia. China remains the world's leader not only in production, but also in export and consumption of tungsten products. Tungsten production is gradually increasing outside China because of the rising demand. Meanwhile, its supply by China
16038-455: The combination, bronze, which has a melting point lower than 1,083 °C (1,981 °F). In comparison, cast iron melts at about 1,375 °C (2,507 °F). Small quantities of iron were smelted in ancient times, in the solid-state, by heating the ore in a charcoal fire and then welding the clumps together with a hammer and in the process squeezing out the impurities. With care, the carbon content could be controlled by moving it around in
16200-408: The dalton is defined as 1/12 of the mass of a free neutral carbon-12 atom in the ground state. The standard atomic weight (commonly called "atomic weight") of an element is the average of the atomic masses of all the chemical element's isotopes as found in a particular environment, weighted by isotopic abundance, relative to the atomic mass unit. This number may be a fraction that is not close to
16362-404: The density, tungsten is seen as an alternative (albeit more expensive) to lead fishing sinkers . Depleted uranium is also used for these purposes, due to similarly high density. Seventy-five-kg blocks of tungsten were used as "cruise balance mass devices" on the entry vehicle portion of the 2012 Mars Science Laboratory spacecraft. It is an ideal material to use as a dolly for riveting , where
16524-416: The discovery and use of elements began with early human societies that discovered native minerals like carbon , sulfur , copper and gold (though the modern concept of an element was not yet understood). Attempts to classify materials such as these resulted in the concepts of classical elements , alchemy , and similar theories throughout history. Much of the modern understanding of elements developed from
16686-452: The economies of melting and casting, can be heat treated after casting to make malleable iron or ductile iron objects. Steel is distinguishable from wrought iron (now largely obsolete), which may contain a small amount of carbon but large amounts of slag . Iron is commonly found in the Earth's crust in the form of an ore , usually an iron oxide, such as magnetite or hematite . Iron
16848-488: The element tungsten is not ferromagnetic (but iron is), when it is present in steel in these proportions, it stabilizes the martensite phase, which has greater ferromagnetism than the ferrite (iron) phase due to its greater resistance to magnetic domain wall motion . Tungsten, usually alloyed with nickel , iron , or cobalt to form heavy alloys, is used in kinetic energy penetrators as an alternative to depleted uranium , in applications where uranium's radioactivity
17010-406: The elements are available by name, atomic number, density, melting point, boiling point and chemical symbol , as well as ionization energy . The nuclides of stable and radioactive elements are also available as a list of nuclides , sorted by length of half-life for those that are unstable. One of the most convenient, and certainly the most traditional presentation of the elements, is in the form of
17172-470: The elements are often summarized using the periodic table, which powerfully and elegantly organizes the elements by increasing atomic number into rows ( "periods" ) in which the columns ( "groups" ) share recurring ("periodic") physical and chemical properties. The table contains 118 confirmed elements as of 2021. Although earlier precursors to this presentation exist, its invention is generally credited to Russian chemist Dmitri Mendeleev in 1869, who intended
17334-480: The elements can be uniquely sequenced by atomic number, conventionally from lowest to highest (as in a periodic table), sets of elements are sometimes specified by such notation as "through", "beyond", or "from ... through", as in "through iron", "beyond uranium", or "from lanthanum through lutetium". The terms "light" and "heavy" are sometimes also used informally to indicate relative atomic numbers (not densities), as in "lighter than carbon" or "heavier than lead", though
17496-413: The elements without any stable isotopes are technetium (atomic number 43), promethium (atomic number 61), and all observed elements with atomic number greater than 82. Of the 80 elements with at least one stable isotope, 26 have only one stable isotope. The mean number of stable isotopes for the 80 stable elements is 3.1 stable isotopes per element. The largest number of stable isotopes for a single element
17658-474: The elements, including consideration of their general physical and chemical properties, their states of matter under familiar conditions, their melting and boiling points, their densities, their crystal structures as solids, and their origins. Several terms are commonly used to characterize the general physical and chemical properties of the chemical elements. A first distinction is between metals , which readily conduct electricity , nonmetals , which do not, and
17820-492: The existing names for anciently known elements (e.g., gold, mercury, iron) were kept in most countries. National differences emerged over the element names either for convenience, linguistic niceties, or nationalism. For example, German speakers use "Wasserstoff" (water substance) for "hydrogen", "Sauerstoff" (acid substance) for "oxygen" and "Stickstoff" (smothering substance) for "nitrogen"; English and some other languages use "sodium" for "natrium", and "potassium" for "kalium"; and
17982-630: The explosive stellar nucleosynthesis that produced the heavy metals before the formation of our Solar System . At over 1.9 × 10 years, over a billion times longer than the estimated age of the universe, bismuth-209 has the longest known alpha decay half-life of any isotope, and is almost always considered on par with the 80 stable elements. The heaviest elements (those beyond plutonium, element 94) undergo radioactive decay with half-lives so short that they are not found in nature and must be synthesized . There are now 118 known elements. In this context, "known" means observed well enough, even from just
18144-648: The finest steel in the world exported to the Roman, Egyptian, Chinese and Arab worlds at that time – what they called Seric Iron . A 200 BC Tamil trade guild in Tissamaharama , in the South East of Sri Lanka, brought with them some of the oldest iron and steel artifacts and production processes to the island from the classical period . The Chinese and locals in Anuradhapura , Sri Lanka had also adopted
18306-579: The fire. Unlike copper and tin, liquid or solid iron dissolves carbon quite readily. All of these temperatures could be reached with ancient methods used since the Bronze Age . Since the oxidation rate of iron increases rapidly beyond 800 °C (1,470 °F), it is important that smelting take place in a low-oxygen environment. Smelting, using carbon to reduce iron oxides, results in an alloy ( pig iron ) that retains too much carbon to be called steel. The excess carbon and other impurities are removed in
18468-513: The form of charcoal) in a crucible, was produced in Merv by the 9th to 10th century AD. In the 11th century, there is evidence of the production of steel in Song China using two techniques: a "berganesque" method that produced inferior, inhomogeneous steel, and a precursor to the modern Bessemer process that used partial decarburization via repeated forging under a cold blast . Since
18630-529: The formation of Earth, they are certain to have completely decayed, and if present in novae, are in quantities too small to have been noted. Technetium was the first purportedly non-naturally occurring element synthesized, in 1937, though trace amounts of technetium have since been found in nature (and also the element may have been discovered naturally in 1925). This pattern of artificial production and later natural discovery has been repeated with several other radioactive naturally occurring rare elements. List of
18792-431: The half-lives predicted for the observationally stable lead isotopes range from 10 to 10 years. Elements with atomic numbers 43, 61, and 83 through 94 are unstable enough that their radioactive decay can be detected. Three of these elements, bismuth (element 83), thorium (90), and uranium (92) have one or more isotopes with half-lives long enough to survive as remnants of the explosive stellar nucleosynthesis that produced
18954-599: The hardenability of thick sections. High strength low alloy steel has small additions (usually < 2% by weight) of other elements, typically 1.5% manganese, to provide additional strength for a modest price increase. Recent corporate average fuel economy (CAFE) regulations have given rise to a new variety of steel known as Advanced High Strength Steel (AHSS). This material is both strong and ductile so that vehicle structures can maintain their current safety levels while using less material. There are several commercially available grades of AHSS, such as dual-phase steel , which
19116-399: The heaviest elements also undergo spontaneous fission . Isotopes that are not radioactive, are termed "stable" isotopes. All known stable isotopes occur naturally (see primordial nuclide ). The many radioisotopes that are not found in nature have been characterized after being artificially produced. Certain elements have no stable isotopes and are composed only of radioisotopes: specifically
19278-549: The heavy elements before the formation of the Solar System. For example, at over 1.9 × 10 years, over a billion times longer than the estimated age of the universe, bismuth-209 has the longest known alpha decay half-life of any isotope. The last 24 elements (those beyond plutonium, element 94) undergo radioactive decay with short half-lives and cannot be produced as daughters of longer-lived elements, and thus are not known to occur in nature at all. 1 The properties of
19440-494: The high wear resistance and thermal conductivity of tungsten carbide improves the printing of abrasive filaments. Some string instrument strings incorporates tungsten. Tungsten is used as an absorber on the electron telescope on the Cosmic Ray System of the two Voyager spacecraft . Its density, similar to that of gold, allows tungsten to be used in jewelry as an alternative to gold or platinum . Metallic tungsten
19602-513: The highest melting point (3,422 °C, 6,192 °F), lowest vapor pressure (at temperatures above 1,650 °C, 3,000 °F), and the highest tensile strength . Although carbon remains solid at higher temperatures than tungsten, carbon sublimes at atmospheric pressure instead of melting, so it has no melting point. Moreover, tungsten's most stable crystal phase does not exhibit any high-pressure-induced structural transformations for pressures up to at least 364 gigapascals. Tungsten has
19764-479: The less soluble "paratungstate B" anion, H 2 W 12 O 42 . Further acidification produces the very soluble metatungstate anion, H 2 W 12 O 40 , after which equilibrium is reached. The metatungstate ion exists as a symmetric cluster of twelve tungsten- oxygen octahedra known as the Keggin anion. Many other polyoxometalate anions exist as metastable species. The inclusion of
19926-400: The lowest coefficient of thermal expansion of any pure metal. The low thermal expansion and high melting point and tensile strength of tungsten originate from strong covalent bonds formed between tungsten atoms by the 5d electrons. Alloying small quantities of tungsten with steel greatly increases its toughness . Tungsten exists in two major crystalline forms: α and β. The former has
20088-439: The main production route. At the end of 2008, the steel industry faced a sharp downturn that led to many cut-backs. In 2021, it was estimated that around 7% of the global greenhouse gas emissions resulted from the steel industry. Reduction of these emissions are expected to come from a shift in the main production route using cokes, more recycling of steel and the application of carbon capture and storage technology. Steel
20250-539: The mass necessary for good results can be achieved in a compact bar. High-density alloys of tungsten with nickel, copper or iron are used in high-quality darts (to allow for a smaller diameter and thus tighter groupings) or for artificial flies (tungsten beads allow the fly to sink rapidly). Tungsten is also used as a heavy bolt to lower the rate of fire of the SWD M11/9 sub-machine gun from 1300 RPM to 700 RPM. Tungsten has seen use recently in nozzles for 3D printing ;
20412-430: The metal matrix in place of cobalt because it takes a higher luster when polished. Sometimes manufacturers or retailers refer to tungsten carbide as a metal, but it is a ceramic . Because of tungsten carbide's hardness, rings made of this material are extremely abrasion resistant, and will hold a burnished finish longer than rings made of metallic tungsten. Tungsten carbide rings are brittle, however, and may crack under
20574-535: The metalworking, woodworking, mining , petroleum and construction industries. Carbide tooling is actually a ceramic/metal composite, where metallic cobalt acts as a binding (matrix) material to hold the WC particles in place. This type of industrial use accounts for about 60% of current tungsten consumption. The jewelry industry makes rings of sintered tungsten carbide , tungsten carbide/metal composites, and also metallic tungsten. WC/metal composite rings use nickel as
20736-450: The most part, however, p-block elements such as sulphur, nitrogen , phosphorus , and lead are considered contaminants that make steel more brittle and are therefore removed from steel during the melting processing. The density of steel varies based on the alloying constituents but usually ranges between 7,750 and 8,050 kg/m (484 and 503 lb/cu ft), or 7.75 and 8.05 g/cm (4.48 and 4.65 oz/cu in). Even in
20898-482: The most stable being W ( t 1/2 6.4 minutes). Tungsten is a mostly non-reactive element: it does not react with water, is immune to attack by most acids and bases, and does not react with oxygen or air at room temperature. At elevated temperatures (i.e., when red-hot) it reacts with oxygen to form the trioxide compound tungsten(VI), WO 3 . It will, however, react directly with fluorine (F 2 ) at room temperature to form tungsten(VI) fluoride (WF 6 ),
21060-405: The most stable of which are W with a half-life of 121.2 days, W with a half-life of 75.1 days, W with a half-life of 69.4 days, W with a half-life of 21.6 days, and W with a half-life of 23.72 h. All of the remaining radioactive isotopes have half-lives of less than 3 hours, and most of these have half-lives below 8 minutes. Tungsten also has 11 meta states , with
21222-446: The movement of dislocations . The carbon in typical steel alloys may contribute up to 2.14% of its weight. Varying the amount of carbon and many other alloying elements, as well as controlling their chemical and physical makeup in the final steel (either as solute elements, or as precipitated phases), impedes the movement of the dislocations that make pure iron ductile, and thus controls and enhances its qualities. These qualities include
21384-720: The name Georg Agricola used for the mineral in 1546, which translates into English as ' wolf's froth ' and is a reference to the large amounts of tin consumed by the mineral during its extraction, as though the mineral devoured it like a wolf. This naming follows a tradition of colorful names miners from the Ore Mountains would give various minerals, out of a superstition that certain ones that looked as if they contained then-known valuable metals but when extracted were somehow "hexed". Cobalt (cf. Kobold ), pitchblende (cf. German blenden for ' to blind, to deceive ' ) and nickel (cf. "Old Nick") derive their names from
21546-418: The periodic table, which groups together elements with similar chemical properties (and usually also similar electronic structures). The atomic number of an element is equal to the number of protons in each atom, and defines the element. For example, all carbon atoms contain 6 protons in their atomic nucleus ; so the atomic number of carbon is 6. Carbon atoms may have different numbers of neutrons; atoms of
21708-426: The periodic tables presented here includes: actinides , alkali metals , alkaline earth metals , halogens , lanthanides , transition metals , post-transition metals , metalloids , reactive nonmetals , and noble gases . In this system, the alkali metals, alkaline earth metals, and transition metals, as well as the lanthanides and the actinides, are special groups of the metals viewed in a broader sense. Similarly,
21870-422: The pervasiveness of the chromium(III) compounds. The highest oxidation state is seen in tungsten(VI) oxide (WO 3 ). Tungsten(VI) oxide is soluble in aqueous base , forming tungstate (WO 4 ). This oxyanion condenses at lower pH values, forming polyoxotungstates . The broad range of oxidation states of tungsten is reflected in its various chlorides: Organotungsten compounds are numerous and also span
22032-611: The physical strength of the catalyst and extends catalyst life. Tungsten containing catalysts are promising for epoxidation, oxidation, and hydrogenolysis reactions. Tungsten heteropoly acids are key component of multifunctional catalysts. Tungstates can be used as photocatalyst, while the tungsten sulfide as electrocatalyst. Applications requiring its high density include weights, counterweights , ballast keels for yachts, tail ballast for commercial aircraft, rotor weights for civil and military helicopters, and as ballast in race cars for NASCAR and Formula One . Being slightly less than twice
22194-449: The product but only locally relieves strains and stresses locked up within the material. Annealing goes through three phases: recovery , recrystallization , and grain growth . The temperature required to anneal a particular steel depends on the type of annealing to be achieved and the alloying constituents. Quenching involves heating the steel to create the austenite phase then quenching it in water or oil . This rapid cooling results in
22356-759: The production methods of creating wootz steel from the Chera Dynasty Tamils of South India by the 5th century AD. In Sri Lanka, this early steel-making method employed a unique wind furnace, driven by the monsoon winds, capable of producing high-carbon steel. Since the technology was acquired from the Tamilians from South India, the origin of steel technology in India can be conservatively estimated at 400–500 BC. The manufacture of wootz steel and Damascus steel , famous for its durability and ability to hold an edge, may have been taken by
22518-412: The pure element to exist in multiple chemical structures ( spatial arrangements of atoms ), known as allotropes , which differ in their properties. For example, carbon can be found as diamond , which has a tetrahedral structure around each carbon atom; graphite , which has layers of carbon atoms with a hexagonal structure stacked on top of each other; graphene , which is a single layer of graphite that
22680-426: The quality of the final product. Today more than 1.6 billion tons of steel is produced annually. Modern steel is generally identified by various grades defined by assorted standards organizations . The modern steel industry is one of the largest manufacturing industries in the world, but also one of the most energy and greenhouse gas emission intense industries, contributing 8% of global emissions. However, steel
22842-772: The reactive nonmetals and the noble gases are nonmetals viewed in the broader sense. In some presentations, the halogens are not distinguished, with astatine identified as a metalloid and the others identified as nonmetals. Another commonly used basic distinction among the elements is their state of matter (phase), whether solid , liquid , or gas , at standard temperature and pressure (STP). Most elements are solids at STP, while several are gases. Only bromine and mercury are liquid at 0 degrees Celsius (32 degrees Fahrenheit) and 1 atmosphere pressure; caesium and gallium are solid at that temperature, but melt at 28.4°C (83.2°F) and 29.8°C (85.6°F), respectively. Melting and boiling points , typically expressed in degrees Celsius at
23004-919: The remaining 11 elements have half lives too short for them to have been present at the beginning of the Solar System, and are therefore considered transient elements. Of these 11 transient elements, five ( polonium , radon , radium , actinium , and protactinium ) are relatively common decay products of thorium and uranium . The remaining six transient elements (technetium, promethium, astatine, francium , neptunium , and plutonium ) occur only rarely, as products of rare decay modes or nuclear reaction processes involving uranium or other heavy elements. Elements with atomic numbers 1 through 82, except 43 (technetium) and 61 (promethium), each have at least one isotope for which no radioactive decay has been observed. Observationally stable isotopes of some elements (such as tungsten and lead ), however, are predicted to be slightly radioactive with very long half-lives: for example,
23166-401: The remaining major use being in alloys and steels. Less than 10% is used in other chemical compounds . Because of the high ductile-brittle transition temperature of tungsten, its products are conventionally manufactured through powder metallurgy , spark plasma sintering , chemical vapor deposition , hot isostatic pressing , and thermoplastic routes. A more flexible manufacturing alternative
23328-495: The same element having different numbers of neutrons are known as isotopes of the element. The number of protons in the nucleus also determines its electric charge , which in turn determines the number of electrons of the atom in its non-ionized state. The electrons are placed into atomic orbitals that determine the atom's chemical properties . The number of neutrons in a nucleus usually has very little effect on an element's chemical properties; except for hydrogen (for which
23490-1042: The same miners' idiom. Tungsten has thus far not been found in nature in its pure form. Instead, tungsten is found mainly in the minerals wolframite and scheelite . Wolframite is iron – manganese tungstate (Fe,Mn)WO 4 , a solid solution of the two minerals ferberite (FeWO 4 ) and hübnerite (MnWO 4 ), while scheelite is calcium tungstate (CaWO 4 ). Other tungsten minerals range in their level of abundance from moderate to very rare, and have almost no economic value. Tungsten forms chemical compounds in oxidation states from -II to VI. Higher oxidation states, always as oxides, are relevant to its terrestrial occurrence and its biological roles, mid-level oxidation states are often associated with metal clusters , and very low oxidation states are typically associated with CO complexes . The chemistries of tungsten and molybdenum show strong similarities to each other, as well as contrasts with their lighter congener, chromium . The relative rarity of tungsten(III), for example, contrasts with
23652-404: The same number of protons in their nucleus), but having different numbers of neutrons . Thus, for example, there are three main isotopes of carbon. All carbon atoms have 6 protons, but they can have either 6, 7, or 8 neutrons. Since the mass numbers of these are 12, 13 and 14 respectively, said three isotopes are known as carbon-12 , carbon-13 , and carbon-14 ( C, C, and C). Natural carbon
23814-457: The second half of the 20th century, physics laboratories became able to produce elements with half-lives too short for an appreciable amount of them to exist at any time. These are also named by IUPAC, which generally adopts the name chosen by the discoverer. This practice can lead to the controversial question of which research group actually discovered an element, a question that delayed the naming of elements with atomic number of 104 and higher for
23976-401: The steel. At the very high cooling rates produced by quenching, the carbon has no time to migrate but is locked within the face-centred austenite and forms martensite . Martensite is a highly strained and stressed, supersaturated form of carbon and iron and is exceedingly hard but brittle. Depending on the carbon content, the martensitic phase takes different forms. Below 0.2% carbon, it takes on
24138-561: The steel. The early modern crucible steel industry resulted from the invention of Benjamin Huntsman in the 1740s. Blister steel (made as above) was melted in a crucible or in a furnace, and cast (usually) into ingots. The modern era in steelmaking began with the introduction of Henry Bessemer 's process in 1855, the raw material for which was pig iron. His method let him produce steel in large quantities cheaply, thus mild steel came to be used for most purposes for which wrought iron
24300-496: The synthetically produced transuranic elements, available samples have been too small to determine crystal structures. Chemical elements may also be categorized by their origin on Earth, with the first 94 considered naturally occurring, while those with atomic numbers beyond 94 have only been produced artificially via human-made nuclear reactions. Of the 94 naturally occurring elements, 83 are considered primordial and either stable or weakly radioactive. The longest-lived isotopes of
24462-955: The table to illustrate recurring trends in the properties of the elements. The layout of the table has been refined and extended over time as new elements have been discovered and new theoretical models have been developed to explain chemical behavior. Use of the periodic table is now ubiquitous in chemistry, providing an extremely useful framework to classify, systematize and compare all the many different forms of chemical behavior. The table has also found wide application in physics , geology , biology , materials science , engineering , agriculture , medicine , nutrition , environmental health , and astronomy . Its principles are especially important in chemical engineering . The various chemical elements are formally identified by their unique atomic numbers, their accepted names, and their chemical symbols . The known elements have atomic numbers from 1 to 118, conventionally presented as Arabic numerals . Since
24624-561: The technology of that time, such qualities were produced by chance rather than by design. Natural wind was used where the soil containing iron was heated by the use of wood. The ancient Sinhalese managed to extract a ton of steel for every 2 tons of soil, a remarkable feat at the time. One such furnace was found in Samanalawewa and archaeologists were able to produce steel as the ancients did. Crucible steel , formed by slowly heating and cooling pure iron and carbon (typically in
24786-440: The tungsten allows the welding rod to withstand the high temperatures of the arc welding environment. Quenched (martensitic) tungsten steel (approx. 5.5% to 7.0% W with 0.5% to 0.7% C) was used for making hard permanent magnets, due to its high remanence and coercivity , as noted by John Hopkinson (1849–1898) as early as 1886. The magnetic properties of a metal or an alloy are very sensitive to microstructure. For example, while
24948-621: The universe at large, in the spectra of stars and also supernovae, where short-lived radioactive elements are newly being made. The first 94 elements have been detected directly on Earth as primordial nuclides present from the formation of the Solar System , or as naturally occurring fission or transmutation products of uranium and thorium. The remaining 24 heavier elements, not found today either on Earth or in astronomical spectra, have been produced artificially: all are radioactive, with short half-lives; if any of these elements were present at
25110-525: The upper carbon content of steel, beyond which is cast iron. When carbon moves out of solution with iron, it forms a very hard, but brittle material called cementite (Fe 3 C). When steels with exactly 0.8% carbon (known as a eutectoid steel), are cooled, the austenitic phase (FCC) of the mixture attempts to revert to the ferrite phase (BCC). The carbon no longer fits within the FCC austenite structure, resulting in an excess of carbon. One way for carbon to leave
25272-528: The work of Dmitri Mendeleev , a Russian chemist who published the first recognizable periodic table in 1869. This table organizes the elements by increasing atomic number into rows (" periods ") in which the columns (" groups ") share recurring ("periodic") physical and chemical properties . The periodic table summarizes various properties of the elements, allowing chemists to derive relationships between them and to make predictions about elements not yet discovered, and potential new compounds. By November 2016,
25434-718: Was developed in Southern India and Sri Lanka in the 1st millennium BCE. Metal production sites in Sri Lanka employed wind furnaces driven by the monsoon winds, capable of producing high-carbon steel. Large-scale wootz steel production in India using crucibles occurred by the sixth century BC, the pioneering precursor to modern steel production and metallurgy. High-carbon steel was produced in Britain at Broxmouth Hillfort from 490–375 BC, and ultrahigh-carbon steel
25596-509: Was formerly used. The Gilchrist-Thomas process (or basic Bessemer process ) was an improvement to the Bessemer process, made by lining the converter with a basic material to remove phosphorus. Another 19th-century steelmaking process was the Siemens-Martin process , which complemented the Bessemer process. It consisted of co-melting bar iron (or steel scrap) with pig iron. These methods of steel production were rendered obsolete by
25758-485: Was identical to tungstic acid. Later that year, at the Royal Basque Society in the town of Bergara , Spain, the brothers succeeded in isolating tungsten by reduction of this acid with charcoal , and they are credited with the discovery of the element (they called it "wolfram" or "volfram"). The strategic value of tungsten came to notice in the early 20th century. British authorities acted in 1912 to free
25920-583: Was long thought to be non-radioactive, but Bi (its longest lived isotope) actually decays with a half life of 2.01 × 10 years or about a factor 10 slower than W . However, due to naturally occurring bismuth being 100% Bi , its specific activity is actually higher than that of natural tungsten at 3 milli-becquerel per kilogram. The other naturally occurring isotopes of tungsten have not been observed to decay, constraining their half-lives to be at least 4 × 10 years . Another 34 artificial radioisotopes of tungsten have been characterized,
26082-438: Was produced globally, with 630,000,000 tonnes (620,000,000 long tons; 690,000,000 short tons) recycled. Modern steels are made with varying combinations of alloy metals to fulfil many purposes. Carbon steel , composed simply of iron and carbon, accounts for 90% of steel production. Low alloy steel is alloyed with other elements, usually molybdenum , manganese, chromium, or nickel, in amounts of up to 10% by weight to improve
26244-757: Was produced in the Netherlands from the 2nd-4th centuries AD. The Roman author Horace identifies steel weapons such as the falcata in the Iberian Peninsula , while Noric steel was used by the Roman military . The Chinese of the Warring States period (403–221 BC) had quench-hardened steel, while Chinese of the Han dynasty (202 BC—AD 220) created steel by melting together wrought iron with cast iron, thus producing
#45954