Misplaced Pages

#790209

51-532: The EMD DDA40X is a 6,600 hp (4,943 kW) D-D locomotive , built by EMD from 1969 to 1971 exclusively for the Union Pacific Railroad . It is the most powerful diesel–electric locomotive model ever built on a single frame, having two 16-645E3A diesel prime movers . Union Pacific has marked DD40X on the cab exteriors, while EMD literature inconsistently refers to this model as either DD-40X or DDA40X . UP's DDA40X locomotives were

102-718: A hinge. Examples include the Milwaukee Road EF-1 "Boxcab" electrics. "B+B-B+B" means there are four trucks under the unit. Within each truck, there are two powered axles, and pairs of them are connected by span bolsters . One example would be the General Electric U50 , built from 1963 to 1965. The 4500 horsepower (3.4 MW) turbine locomotives built by GE for Union Pacific also used this arrangement. The EFVM railway of Brazil uses narrow gauge GE "BB" locomotives with this arrangement, both with "standard" and wide cabs. A GE Dash 9-40BBW , for instance,

153-637: A member of the Union Pacific Heritage Fleet until 2022, when it was announced it would be donated to the Railroading Heritage of Midwest America museum. In 1969, Union Pacific was retiring the last of their gas turbine–electric locomotives . Beginning in 1963, Union Pacific had ordered EMD DD35s and DD35As to replace the turbines, and the DDA40X was a further development from this design. The first DDA40X, UP 6900,

204-412: A number of new technologies that would go on to be incorporated in future EMD designs. Ultimately, UP did not continue with exceptionally powerful locomotives like the DDA40X built on single frames, instead moving toward distributed power using smaller locomotives closer to 4,000 hp. All of DDA40X locomotives were retired between 1984 and 1986; several of them survive. Union Pacific 6936 operated as

255-410: A pair of high-powered B-B locomotives on a common frame as far as traction and power was concerned). In fact, a usual consist of a D-D unit included a leading C-C unit and a trailing C-C unit, for a total of about 12,600 hp (9.4 MW) (with four total prime-movers). With today's higher horsepower C-C units (about 4,300 hp (3.2 MW) apiece), three such C-C units exceeds the total power of

306-450: A part of the railroad's excursion fleet . The locomotive's last excursion with UP was in 2015, when it helped the UP's trio of EMD E9 units at the annual Cheyenne Frontier Days event. It was last used on July 12, 2016, when it helped to test UP 844 , a steam locomotive being returned to service. Its dynamic brakes were used to simulate a load while being pulled. After the tests, it

357-568: A railroad employee riding on the nose section and the driver of the dump truck. The unit was stored in North Little Rock, Arkansas , until damage to its nose could be repaired. In April 2022, Union Pacific announced that 6936—along with Union Pacific 3985 , Union Pacific 5511 , and several other pieces of equipment stored at the Cheyenne roundhouse—were to be donated to the Railroading Heritage of Midwest America, with plans to return

408-442: A row, "C" to three powered axles in a row, and "D" to four powered axles in a row. "1" refers to one idler axle, and "2" to two idler axles in a row. A dash ("–") separates trucks or wheel assemblies. A plus sign ("+") refers to articulation, either by connecting bogies with span bolsters or by connecting individual locomotives via solid drawbars instead of couplers . "1A-A1" means there are two trucks (or wheel assemblies) under

459-490: Is "Four axle". "B-2-B" means there are three trucks. The center truck has two unpowered axles and the truck at each end has two powered axles. The locomotive frame must either articulate or allow for significant side play to be provided to the center truck. Examples of this type were built as light rail vehicles. "B-B-B" means there are three trucks. Each truck has two powered axles. The locomotive frame must either articulate or allow for significant side play to be provided to

510-408: Is "Six axle". "1-C+C-1" means there are two sets of articulated axles under the unit. Within each of these sets, there is a truck with one idler axle, and inboard of it are three powered axles. Two of these articulated sets are placed back to back and connected by a hinge. The PRR FF1 and FF2 electric locomotives used this arrangement. "2-C+C-2" means there are two sets of articulated axles under

561-954: Is 98 ft (30 m) long. The frames were fabricated by the John Mohr Company of Chicago, because they were too large for EMD's factory. The use of more than one prime mover in a single locomotive was not new; the E-series were popular dual-engine locomotives, and Baldwin had produced (but not sold) a locomotive with four diesel engines. The X in the model number stood for experimental , as DDA40X Centennials were testbeds for technology that would go into future EMD products. UP frequently used these locomotives to haul heavy freights. Each unit successfully ran about two million miles (3,200,000 km) before they were retired from revenue service in 1985. The modular electronic control systems later used in EMD Dash-2 models were first used on

SECTION 10

#1732793059791

612-523: Is a guiding truck with two idler axles, and inboard of this, and hinged to it, is a truck with three powered axles. The GE steam turbine-electric locomotives of 1939 were notable examples of this arrangement. "2-C1+2-C1-B" means there are five trucks. Only the first three axles on the four-axle trucks were powered, as were both axles in the last truck; the first and middle trucks had two unpowered axles each. The only examples of this arrangement were three unique coal -fired steam-turbine locomotives built by

663-584: Is a narrow-gauge adaptation of the SD45 , which required additional axles due to using smaller traction motors. "2-D+D-2" means there are two sets of articulated axles under the unit. Within each of these sets, there is a truck with two idler axles, and inboard of it are four powered axles. Two of these articulated sets are placed back to back and connected by a hinge. Examples include the Baldwin DR-12-8-1500/2 "Centipede" diesel locomotives and

714-751: Is a truck with two idler axles, and inboard of it are four powered axles. Two of these articulated sets are placed back to back and connected by a hinge. The Little Joes , Baldwin DR-12-8-1500/2 , and Baldwin 4-8+8-4-750/8-DE locomotives used this arrangement. "D-D" means there are two trucks each with four powered axles. Examples include the EMD DD units. D-D locomotives have fallen out of favor as nearly all of these were twin-engined locomotives, which placed too much horsepower in too few axles which made these consists rather inflexible (each locomotive featured two prime movers , making each unit essentially

765-399: Is a wide cab GE Dash 9-40CW series 4,000 hp (3,000 kW) locomotive with a B+B-B+B wheel arrangement. The EMD SD70ACe-BB produced from 2015 onward also has a B+B-B+B arrangement. "B-B+B-B" means that the locomotive has four trucks. Each truck contains two powered axles. The middle pair of trucks are connected by a span bolster . In most cases, the locomotive is articulated over

816-551: Is under the back of the unit, and has one idler axle. Examples include the three EMD LWT12 locomotives built by EMD in 1956. Twenty SD70ACe-P4 locomotives were built by EMD with a B1-1B arrangement that has two three axle trucks with each truck having two AC traction motors and one idler axle nearest the fuel tank. The locomotive was designed as an AC traction alternative to the SD70M-2 that uses three DC traction motors on each of two three axle trucks. Only BNSF ordered

867-465: Is under the back of the unit, and has two idler axles in a row. Examples include the three lightweight RP-210 locomotives built by Baldwin in 1956 and 1957 for use with Pullman-Standard Train-X equipment. "B-A1A" means there are two trucks. The "B" truck is under the front of the unit, and has two powered axles. The "A1A" truck is under the back of the unit, and has one powered axle, one idler axle, and one more powered axle. Examples include some of

918-600: Is under the front of the unit, and has one powered axle, one idler axle, and one more powered axle. The "3" truck is under the back of the unit, and has three idler axles in a row. An example is the Baldwin DR-6-2-10 1,000 hp (750 kW) cab unit, only one of which was built for the Chicago and North Western Railway in 1948. "A1A-A1A" means there are two trucks under the locomotive. Each truck has two powered axles, with an idler axle between them. This spreads

969-539: Is under the front of the unit, and has three idler axles in a row. The "A1A" truck is under the rear of the unit, and has one powered axle, one idler axle, and one more powered axle. An example is the later built FM OP800 800 hp (600 kW) railcar, six of which were built by the St. Louis Car Company exclusively for the Southern Railway in 1939. "A1-1A" means there are two trucks or wheel assemblies under

1020-758: The Baldwin Locomotive Works for the Chesapeake and Ohio Railway between 1947 and 1948. This locomotive is sometimes called the M-1. "C-C+C-C" means there are four trucks under the unit. Each truck has three powered axles. The only examples of this type were the 8500 horsepower (6.3 MW) turbine locomotives built by General Electric for Union Pacific . These locomotives consisted of two permanently coupled C-C units. "C+C-C+C" means there are four trucks. Each truck has three powered axles and pairs of them are connected by span bolsters . This arrangement

1071-834: The British Rail Class 28 are the only locomotives to use this wheel arrangement. "C-C" means there are two identical trucks. Each truck has three powered axles. Examples include the EMD SD (Special Duty), GMD GF6C , EMD GM6C , PRR E44 , GE E60 , Virginian EL-C and GE Evolution Series units, except the ES44C4 and ET44C4 which use the A1A-A1A wheel arrangement. This is a currently popular configuration used in low-speed, high-weight applications, such as unit coal trains. General ("manifest") freight trains also use C-C locomotives. See also Co-Co . An American colloquialism of "C-C"

SECTION 20

#1732793059791

1122-931: The FM C-liners (most passenger units) built from 1950 to 1955, and the EMD FL9 . "B-B" means there are two identical trucks. Each truck has two powered axles, a currently popular configuration used in high-speed, low-weight applications such as intermodal trains and high-speed rail , as well as switcher locomotives . Examples include the EMD GP (General Purpose), EMD F-units , EMD SW1500 , Acela Express Power Cars , Siemens Charger , Siemens ACS-64 and GE Genesis units. High speed ("time") freight trains, with guaranteed schedules often use B-B locomotives of 3,800 HP (950 HP per axle), but this application, too, has largely been replaced by higher-powered, 4,500 HP C-C locomotives (750 HP per axle). An American colloquialism of "B-B"

1173-621: The GE " Little Joe " electric locomotives . "B-D+D-B" means there are two sets of articulated axles under the unit. Within each of these sets, there is a truck with two powered axles, and inboard of it are four powered axles. Two of these articulated sets are placed back to back and connected by a hinge. The W-1 class of electric locomotives built by General Electric for the Great Northern Railway used this arrangement. "1B+D+D+B1" means there are four sets of articulated axles under

1224-535: The Great Northern Z-1 electric locomotives (for the Cascade Tunnel electrification) used this arrangement. "2-D-2" means there are three trucks. At either end are trucks with two idler axles; the center truck has four powered axles. The PRR R1 electric locomotive used this arrangement. "2-D+D-2" means there are two sets of articulated axles under the unit. Within each of these sets, theare

1275-492: The Southern Railway in 1939. "2-B" means there are two trucks or wheel assemblies. The "2" truck is under the front of the unit, and has two idler axles in a row. The "B" truck is under the rear of the unit, and has two powered axles. Examples include the three lightweight power cars built by ALCO / ACF in 1935 and 1937 for use with the Rebel streamliners. "3-A1A" means there are two trucks or wheel assemblies. The "3" truck

1326-546: The Texas Mexican Railway . "2-A1A" means there are two trucks or wheel assemblies. The "2" truck is under the front of the unit, and has two idler axles in a row. The "A1A" truck is under the rear of the unit, and has one powered axle, one idler axle, and one more powered axle. An example is the FM OP800 800 hp (600 kW) railcar, six of which were built by the St. Louis Car Company exclusively for

1377-470: The Virginian Railway 's EL-2B electric locomotives. Union Pacific 6936 Union Pacific 6936 is an EMD DDA40X locomotive built for the Union Pacific Railroad ( UP ). Previously a part of UP's heritage fleet , 6936 was for several decades the last remaining operational "Centennial" type, and thus the largest operational diesel-electric locomotive in the world. It is now owned by

1428-459: The "1" truck is under the front of the unit, and has one idler axle. The remaining 4 axles are rigidly mounted to the frame behind this lead truck (or grouped in a second truck). This is roughly the equivalent of a 2-8-0 Consolidation in the Whyte notation, particularly when built as a 1-truck/4 rigid axle locomotive. The only known examples are a series of diesel boxcab locomotives built and owned by

1479-574: The DDA40X and the 4,200 hp SD45X . All DDA40X units included a new load test circuit, whose dynamic braking resistors allowed units to load test without a track-side load test box. Gearing was 59:18, allowing 80 mph (130 km/h) on freight trains. The DDA40X has a wide nose akin to those on the F45 and FP45 cowl units . These cabs were superficially similar to the Canadian comfort cab introduced by Canadian National in 1973, though without

1530-626: The Railroading Heritage of Midwest America in Silvis, Illinois , who plans to return the locomotive to operation. Built in January 1971, the UP classifies No. 6936 as a DD40X rather than a DDA40X as indicated by the model designation on the cab of the locomotive. It served in revenue service over the next decade and into the mid-1980s across the Union Pacific system. UP 6936 made its last regular freight trip on May 6, 1985. It went on to become

1581-505: The UK, the Class 31 uses this wheel arrangement. "A1A-B+B" means there are three trucks. The first truck has three axles, with the center one unpowered. A pair of two-axle trucks, each with both axles powered, are connected by a span bolster under the rear of the unit. The only example to date of this arrangement was a single experimental EMD SDP45 . "B" means there are two powered axles under

EMD DDA40X - Misplaced Pages Continue

1632-505: The center truck. The Russian VL85 and US-American EMD GM10B was a notable example. See also Bo-Bo-Bo . "B+B+B" means there are three articulated sets of two powered axles each under the unit. The locomotive frame must allow for significant side play to be provided to the center axle set, as well as allowing for end play for the end sets. The ten Mexican Railway GE boxcab electrics of 1923 are examples of this wheel arrangement. "2-B+B-2" means there are two sets of articulated axles under

1683-438: The center trucks. "B-B+B-B+B-B" means that the locomotive has six trucks. Each truck contains two powered axles. The only known locomotives to have this configuration were the two EMD TR3 locomotives made of three permanently coupled B-B units, which had solid drawbars connecting the units instead of the typical couplers. "C" means there are three powered axles under the unit. They are not articulated relative to other parts of

1734-467: The culmination of the company's experiments with extremely powerful locomotives that began with its gas turbine–electric locomotives and DD35s . For manufacturer EMD, the construction of the world's most powerful single frame locomotive was a sign of the company's dominance of the North American diesel locomotive market, with only GE Transportation an equal competitor. The DDA40X also pioneered

1785-459: The early 1980s. But in early 1984, as rail traffic rebounded, Union Pacific brought 25 units out of storage and rebuilt them to return to service. All locomotives were finally retired by 1986. Eleven DDA40X units are preserved by various museums, while another unit survives as a source of spare parts for other locomotives. UP 6936 , the sole operating unit, was owned by Union Pacific and was used in excursion service until 2016. In 2022, this locomotive

1836-509: The locomotive. This arrangement is only used on very small locomotives (e.g. the PRR B1 ). This arrangement is sometimes referred to as 0-6-0 , the Whyte notation equivalent. "C-B" means there are two trucks. The "C" truck is under the front of the unit, and has three powered axles. The "B" truck is under the rear of the unit, and has two powered axles. The Japanese DE10 , DE11 , and DE15 and

1887-477: The model in 2014. The other locomotive with this wheel arrangement is the EMD SD70MACH , which is an SD70MAC rebuilt by Progress Rail for Metra and used for passenger service. In 2020, Metra approved of the purchase of 15 of these locomotives with options to purchase up to 27 more. "B-2" means there are two trucks. The "B" truck is under the front of the unit, and has two powered axles. The "2" truck

1938-509: The span bolster. The Union Pacific 's M-10002 diesel streamliner and New York Central 's T-Motor third-rail electric locomotives are examples of this type. This arrangement also includes locomotives made of two permanently coupled B-B units, such as some EMD FT units which had a solid drawbar connecting two units instead of the typical couplers. "B-B-B-B" means there are four trucks. Each truck has two powered axles. The locomotive frame must allow for significant side play to be provided to

1989-754: The structural reinforcements of the Canadian design. Other experiments were conducted during the service life of these locomotives. A few of the units were fitted with Federal Signal Thunderbolt air raid sirens to warn track-side personnel when away from grade crossings, but the results were inconclusive. Another test included the modular electrical components, which was successful. This made for easier diagnosis of electrical problems. These modifications were used in all future locomotives built by EMD. Despite their excellent performance and relatively good efficiency, these units were costly to maintain, which ultimately prompted Union Pacific to begin placing them into storage in

2040-462: The unit. At each end, there is one unpowered axle and two powered axles, hinged to a set of four powered axles. Two of these articulated sets are placed back to back and connected by a hinge. The "Bi-Polar" electric locomotives used by the Milwaukee Road used this arrangement. "(B+B-B+B)+(B+B-B+B)" means there are 2 units, each with 4 trucks in a B+B-B+B wheel arrangement. An example was

2091-595: The unit. Each truck has one powered axle and one idler axle, with the idler axles to the outside. Examples include Budd RDC diesel multiple unit ( DMU ) cars. "1B-1B" means there are two trucks with a leading idler axle in front of two powered axles. This arrangement was used to upgrade the B-B arrangement of two EMC 1800 hp B-B locomotives owned by the Santa Fe Railroad in 1938, for greater stability at speed. "1-D" means there are two trucks or groups of axles;

EMD DDA40X - Misplaced Pages Continue

2142-608: The unit. Each truck has one powered axle and one idler axle, with the powered axles to the outside. "A1A-2" means there are two trucks. The "A1A" truck is under the front of the unit, and has one powered axle, one idler axle, and one more powered axle. The "2" truck is under the back of the unit, and has two idler axles in a row. An example is the Silver Charger power car for the General Pershing Zephyr . "A1A-3" means there are two trucks. The "A1A" truck

2193-466: The unit. These axles are not articulated relative to other parts of the locomotive. This arrangement is only used on very small locomotives, such as the EMD Model 40 . It is also used on speeders . This arrangement is sometimes referred to as 0-4-0 , the Whyte notation equivalent. "B-1" means there are two trucks. The "B" truck is under the front of the unit, and has two powered axles. The "1" truck

2244-420: The unit. Within each of these sets, there is a truck with two idler axles, and inboard of it are three powered axles. Two of these articulated sets are placed back to back and connected by a hinge. The Pennsylvania Railroad 's GG1 and Companhia Paulista 's electric locomotives were notable examples of this arrangement. "2+C-C+2" means there are two sets of axles under the unit. Within each of these sets, there

2295-570: The unit. Within each of these sets, there is a truck with two idler axles, and inboard of it are two powered axles. Two of these articulated sets are placed back to back and connected by a hinge. The PRR DD1 and DD2 electric locomotives used this arrangement. "2-B+B+B+B-2" means there are two sets of articulated axles under the unit. Within each of these sets, there is a truck with two idler axles, and inboard of it are two powered axles, hinged to yet another set of two powered axles. Two of these articulated sets are placed back to back and connected by

2346-499: The usual D-D consist by 300 hp (220 kW) (with one fewer prime-mover than a usual D-D consist, thereby significantly improving reliability and dramatically reducing maintenance). Although the D-D arrangement is associated with twin-prime-mover locomotives of high power, this does not mean a D-D with a single high-power prime mover may be built in the future, nor does it exclude two-truck, eight-axle electric locomotive. The EMD DDM45

2397-540: The weight of the locomotive more evenly over the track and counteracts the tendency of trucks to oscillate at high speeds, which is a problem with two axle trucks. The idler wheels may be smaller than the powered wheels. Examples of locomotives with this wheel arrangement include the EMD E-units and ALCO PAs , which were high speed passenger locomotives, and the dual service FM Erie-built . BNSF took delivery of ES44C4 locomotives with this type of truck in 2009. In

2448-620: Was delivered in April 1969, in time to participate in the celebrations of the centennial anniversary of the completion of the first transcontinental railroad driving the "Gold Spike Limited"; it arrived in Salt Lake City , Utah, on the morning of May 10, 1969. In honor of this, the class was nicknamed Centennials and the choice of locomotive numbers in the 6900s was made for the same reason. Forty-six more were built between June 1969 and September 1971, numbered from 6901 to 6946. The DDA40X

2499-608: Was donated by Union Pacific to the Railroading Heritage of Midwest America, which plans to return the locomotive to operation. 6936 was operated by the museum for the first time in August 2023. Thirteen DDA40Xs survive today. The following list details the surviving locomotives and their current owners. AAR wheel arrangement#D-D The AAR system (like UIC) counts axles, unlike Whyte, which counts wheels. Letters refer to powered axles, and numbers to unpowered (or idler) axles. "A" refers to one powered axle, "B" to two powered axles in

2550-566: Was placed into storage at the roundhouse in Cheyenne. At the time, the current operating condition of No. 6936 was unclear. As of 2017, a page posted on UP's website said the locomotive "now travels on occasion as part of the UP Heritage Fleet." But a page posted in 2019 did not describe No. 6936 as being operational. In November 2000, UP 6936 collided with a dump truck at a grade crossing in Livonia, Louisiana . The accident killed

2601-679: Was used on the Jawn Henry coal -fired steam-turbine locomotive built by the Baldwin Locomotive Works for the Norfolk & Western Railway in May, 1954. "1-D-1" means there are three trucks under the unit. At either end are trucks with one idler axle; the center truck has four powered axles. The original 1904–1909 New York Central S-Motor third-rail electric locomotives (for the Grand Central Terminal electrification) and

SECTION 50

#1732793059791
#790209