Misplaced Pages

#324675

77-460: The Fiat Cinquecento (Type 170) ( / ˌ tʃ ɪ ŋ k w ɪ ˈ tʃ ɛ n t oʊ / , Italian: [ˌtʃiŋkweˈtʃɛnto] ) is a front engine front-wheel-drive , four passenger, three door hatchback city car manufactured and marketed by Fiat from 1991 to 1998 over a single generation. It was manufactured at Fiat Auto Poland , which had manufactured its predecessor the Fiat 126 . Production of

154-417: A transverse engine , rather than the conventional longitudinal engine arrangement generally found in rear-wheel-drive and four-wheel-drive vehicles. By far the most common layout for a front-wheel-drive car is with the engine and transmission at the front of the car, mounted transversely. Other layouts of front-wheel drive that have been occasionally produced are a front-engine mounted longitudinally,

231-562: A cheaper, and even more successful Trumpf Junior model, which sold over 100,000 in August 1939, and in the same year Citroën introduced the very successful Traction Avant models in France, over time selling them in the hundred thousands. Hupmobile made 2 experimental models with front-wheel drive in 1932 and 1934, but neither came into production In the late 1930s, the Cord 810/812 of

308-406: A flexibly located electronically controlled cooling fan. This configuration was pioneered by Dante Giacosa in the 1964 Autobianchi Primula and popularized with the Fiat 128 . Fiat promoted in its advertising that mechanical features consumed only 20% of the vehicle's volume and that Enzo Ferrari drove a 128 as his personal vehicle. The 1959 Mini used a substantially different arrangement with

385-456: A front-wheel-drive system for motorising horse-drawn carts. In 1899 the inventor Henry Sutton designed and built one of Australia's first cars, called The Sutton Autocar. This car may have been the first front-wheel-drive car in the world. Henry's car was reported in the English press at the time and featured in the English magazine Autocar , after which the car was named. Two prototypes of

462-441: A massive increase in grip and handling over all but the most expensive cars on the market. It initially used flexing rubber instead of needle rollers at the inboard universal joints of the driveshafts but later changed to needle rollers, and GKN designed constant-velocity joint at each outboard end of the drive shafts to allow for steering movement. The Mini revived the use of front-wheel drive which had been largely abandoned since

539-433: A mid-engine layout and a rear-engine layout. Experiments with front-wheel-drive cars date to the early days of the automobile. The world's first self-propelled vehicle, Nicolas-Joseph Cugnot 's 1769/1770 "fardier à vapeur" , was a front-wheel-driven three-wheeled steam-tractor. It then took at least a century for the first experiments with mobile internal combustion engines to gain traction. Sometime between 1895 and 1898

616-471: A more powerful transverse engine: accordingly, faster versions featured longitudinally mounted (north–south) engines. Despite these developments, however, by the end of the 1980s, almost all major European and Japanese manufacturers had converged around the Fiat-pioneered system of a transversely mounted engine with an "end-on" transmission with unequal length driveshafts. For example, Renault dropped

693-593: A number of design houses, including one that featured half of the car's interior and a running board to place bikes. Another of these designs was the Lucciola, a proposal for a new Cinquecento by Fabrizio Giugiaro of Italdesign . However, instead of the car becoming the next small Fiat city car, a version of the design ended up being put into production by the South Korean Daewoo Motor , as their Matiz in 1998. Instead, Fiat decided to update

770-536: A slight reduction of output, now producing 39 PS (29 kW; 38 hp). This engine is derived from that used in the Fiat 127. While it still retains OHV chain drive pushrod layout it now has hydraulic tappets. Also now uses twin coil distributorless ignition. In 1994, Fiat introduced the Cinquecento Sporting, featuring the 1108 cc SOHC FIRE 54 PS (40 kW; 53 hp) engine from

847-576: A transverse-mounted engine behind the front axle. This design would continue for 3 decades in Germany. Buckminster Fuller adopted rear-engine, front-wheel drive for his three Dymaxion Car prototypes. Other German car producers followed: Stoewer offered a car with front-wheel drive in 1931, Adler in 1932 and Audi in 1933. Versions of the Adler Trumpf sold five-figure numbers from 1932 to 1938, totalling over 25,600 units. In 1934, Adler added

SECTION 10

#1732772579325

924-758: A transversely installed engine was the Suzuki Suzulight , which was a small "city" car, called a kei car in Japanese. In 1955, the Polish producer FSO in Warsaw introduced the front-wheel-driven Syrena of its own design. In 1959 Austin Mini was launched by the British Motor Corporation , designed by Alec Issigonis as a response to the first oil crisis, the 1956 Suez Crisis , and

1001-540: A water cooled 3.5 horsepower (2.6 kW) Aster engine. The engine was mounted on the front axle and so was rotated by the tiller steering. The name Victoria Combination described the lightweight, two-seater trailer commonly known as a Victoria, combined with the rear axle and drive mechanism from a motor tricycle that was placed in front to achieve front wheel drive. It also known as the Eureka . By 1899 Victoria Combinations were participating in motoring events such as

1078-417: Is available in 1.0 L; 61.0 cu in (999 cc) (Brazil) and 1.2 L; 75.8 cu in (1,242 cc) (Brazil & Europe) displacements. The 1.4 L; 83.5 cu in (1,368 cc) variation introduced in 2003 is available in both 8 and 16 valves. In 2005 Fiat introduced a version of the 16v incorporating port deactivation (PDA) and exhaust gas recirculation (EGR). This unit

1155-507: Is frequently referred to as the "StarJet" engine. One year later, a turbocharged variety of the StarJet was introduced under the name "T-Jet", and a MultiAir (adding electro-hydraulic intake valve driving, with variable timing, lift and profile) version was added in 2009, available in either naturally aspirated and turbocharged forms. It reached 190 PS on the Abarth 695 Biposto. The FIRE

1232-491: Is near the centre of the car, making the main component of its moment of inertia relatively low). Another result of this design is a lengthened chassis. Except for Citroën, after the 1930s, front-wheel drive would largely be abandoned for the following twenty years. Save the interruption of World War II , Citroën built some 3 ⁄ 4 million Traction Avants through 1957; adding their cheap 2CV people's car in 1948, and introducing an equally front-wheel driven successor for

1309-475: The British Motor Corporation – moved over to the industry-standard solution for the Austin Maestro in 1983, and all its subsequent front-wheel-drive models. By reducing drivetrain weight and space needs, vehicles could be made smaller and more efficient without sacrificing acceleration. Integrating the powertrain with a transverse as opposed to a longitudinal layout, along with unibody construction and

1386-612: The Cadillac lineup) back to rear-wheel drive. There were relatively few rear-wheel-drive cars marketed in North America by the early 1990s; Chrysler 's car line-up was entirely front-wheel drive by 1990. GM followed suit in 1996 where its B-body line was phased out, where its sports cars (Camaro, Firebird, Corvette) were the only RWDs marketed; by the early 2000s, the Chevrolet Corvette and Cadillac Catera were

1463-492: The Douvrin engines used in the larger Renaults (20, 21, 25 and 30) used this longitudinal "forward" layout. The Saab Saab 99 , launched in 1968, also used a longitudinal engine with a transmission underneath with helical gears. The 1966 Oldsmobile Toronado was the first U.S. front-wheel-drive car since the Cord 810 . It used a longitudinal engine placement for its V8, coupled with an unusual "split" transmission, which turned

1540-578: The Fiat 128 featured a transverse-mounted engine with unequal-length drive shafts and an innovative clutch release mechanism – an arrangement which Fiat had strategically tested on a previous production model, the Primula , from its less market-critical subsidiary, Autobianchi . Ready for production in 1964, the Primula featured a gear train offset from the differential and final drive with unequal length drive shafts . The layout enabled

1617-617: The Great Depression , by 1932 the Cord L-29 was discontinued, with just 4,400 sold. The 1929 Ruxton sold just 200 cars built that year. The first successful consumer application came in 1929. The BSA (Birmingham Small Arms Company) produced the unique front-wheel-drive BSA three-wheeler. Production continued until 1936 during which time sports and touring models were available. In 1931 the DKW F1 from Germany made its debut, with

SECTION 20

#1732772579325

1694-620: The Prince Motor Company also developed a transmission-in-sump type layout for its first front wheel drive model, which after the company's takeover by Nissan , emerged as the Datsun 100A (Cherry) in 1971. In 1960 Lancia could evolve the project CemsaF11 of Antonio Fessia with the innovative Lancia Flavia for first time with motor Boxer on auxiliary frame for low centre of gravity. This scheme continued in Lancia until 1984 with

1771-458: The Taunus   P4 . The 1965 Triumph 1300 was designed for a longitudinal engine with the transmission underneath. Audi has also used a longitudinally mounted engine overhung over the front wheels since the 1970s. Audi is one of the few manufacturers which still uses this particular configuration. It allows the use of equal-length half shafts and the easy addition of all-wheel drive , but has

1848-839: The Tracta constant-velocity joint in 1926. In October 1928 a sensation at the 22nd Paris Motor Show was the Bucciali TAV-6. Six years before the appearance of the Citroën Traction Avant and more than two years before the launch of the DKW F1, the Bucciali TAV-6 featured front-wheel drive. Both German makers DKW in 1931 and Adler in 1933 bought Tracta licenses for their first front-wheel-drive cars. Imperia in Belgium and Rosengart in France manufactured

1925-514: The 126p BIS, an evolution of the 126p which was cancelled when the Cinquecento production started. In order to be fitted in the front-wheel drive Cinquecento, it underwent a major refurbishment (although the engine still employed a carburettor ), which resulted, among other changes, in the crankshaft revolving in the opposite direction than in the 126p BIS. The bigger engine was the 903 cc 40 PS (29 kW; 39 hp) version of

2002-443: The 1930s. The transversely mounted engine combined with front-wheel drive was popularized by the 1959 Mini ; there the transmission was built into the sump of the engine, and drive was transferred to it via a set of primary gears . Another variant transmission concept was used by Simca in the 1960s keeping the engine and transmission in line, but transverse mounted and with unequal length driveshafts. This has proven itself to be

2079-596: The 1948 Saab 92 . In 1946, English car company Lloyd cars produced the Lloyd 650 , a front-wheel-drive roadster. The two-stroke, two-cylinder motor was mounted transversely in the front and connected to the front wheels through a four-speed synchronised gearbox. The high price and lacklustre performance doomed its production. Only 600 units were produced from 1946 to 1950. In 1946 in Italy, Antonio Fessia created his Cemsa Caproni F11 , with 7 examples produced. His innovation

2156-420: The 1986 Ford Taurus . By the mid-1980s, most formerly rear-wheel-drive Japanese models were front-wheel drive, and by the mid-1990s, most American brands only sold a handful of rear-wheel-drive models. The vast majority of front-wheel-drive vehicles today use a transversely mounted engine with "end-on" mounted transmission, driving the front wheels via driveshafts linked via constant velocity (CV) joints , and

2233-551: The 371 km (231 mi) Paris– St Malo race, finishing 23rd overall and second(last) in the class. In October a Victoria Combination won its class in the Paris-Rambouillet-Paris event, covering the 100-kilometre course at 26 km/h (16 mph). In 1900 it completed 240 kilometres (150 mi) non-stop at 29 km/h (18 mph). When production ceased in mid-1901, over 400 units had been sold for 3,000 Francs (circa $ 600) each. A different concept

2310-575: The Adler under the licenses using the Tracta CV joints. During the second World War, all British vehicles, U.S. Jeeps made by Ford and Dodge command cars used Tracta CV joints. Russia and Germany also used the Tracta CV joints, but without the licensing. The United States only saw a few limited production experiments like the Cord L-29 of 1929, the first American front-wheel-drive car to be offered to

2387-495: The Austrian brothers and bicycle producers Franz, Heinrich and Karl Gräf (see Gräf & Stift ) commissioned the technician Josef Kainz to build a voiturette with a one-cylinder De Dion-Bouton engine fitted in the front of the vehicle, powering the front axle . It is possibly the world's first front-wheel-drive automobile, but it never saw series production, with just one prototype made. In 1898, Latil , in France, devised

Fiat Cinquecento - Misplaced Pages Continue

2464-673: The Autocar were built and the Austral Otis Company was going to go into business with Henry to manufacture Henry's car but the cost of the car was too prohibitive as it could not compete with the cost of imported cars. In 1898–99, the French manufacturer Société Parisienne patented their front-wheel-drive articulated vehicle concept which they manufactured as a Victoria Combination . It was variously powered by 1.75 or 2.5 horsepower (1.30 or 1.86 kW) De Dion-Bouton engine or

2541-564: The BOSMAL study, resulting in the first generation Renault Twingo . Launched in December 1991 to replace the Fiat 126 , the Cinquecento was designed by Ermanno Cressoni in collaboration with Antonio Piovano; the interior was designed by Claudio Mottino and Giuseppe Bertolusso. The Cinquecento featured independent suspension front and in the rear, front disc brakes , side impact beams, crumple zone and galvanized body panels. Steering

2618-602: The BOSMAL, a small car project that would culminate in the concept Beskid 106 . Acquisition of FSM by the Italian automotive group led to the abandonment of this prototype in favor of a car that incorporated some of the concepts of the X1/7 series of previous years (until 1993 the cars produced in Poland were marketed as FSM rather than FIAT models). Notably, Patrick Le Quément , Renault's chief designer, sought similar inspiration from

2695-620: The Cinquecento Elettra enjoyed relative popularity in Italy , France and Switzerland . Fiat offered optional extras from the factory labelled with the Abarth name. The Abarth extras for the Cinquecento consisted of cosmetic changes only. A front apron with fitted fog lights, a rear apron, side skirts and a rear spoiler with a fitted 3rd brake light. There were also a set of 13" Speedline five spoke alloys wheels available, instead of

2772-465: The Cinquecento called the Elettra. The car was offered with either a lead acid or NiCd battery pack, providing a ranges of 62 mi (100 km) and 93 mi (150 km) respectively. Unlike purpose built electric cars, the Cinquecento Elettra used two battery packs, one in the engine bay and one under the rear seats, replacing the fuel tank. Although selling for 140,000 francs (~US$ 23,000),

2849-585: The Cinquecento ended in 1998 with the introduction of the Fiat Seicento . The origins of the Cinquecento trace to the early 1980s, with focused research projects of the Consiglio Nazionale delle Ricerche in Rome, studying a super-economical vehicle – from which a series of prototypes evolved, with abbreviations X1/72 to X1/79. In parallel, FSM , not yet under FIAT's ownership, was studying

2926-485: The Cinquecento's styling in early 1998 and relaunch it as the Seicento, which continued until 2010 and enabled the Cinquecento's basic design and most of its mechanicals to survive for nearly 20 years. Front-wheel-drive Front-wheel drive ( FWD ) is a form of engine and transmission layout used in motor vehicles, in which the engine drives the front wheels only. Most modern front-wheel-drive vehicles feature

3003-891: The Sydney motoring industry and invented a system that used a "spherical radial gear" that was fitted to what is believed to have been a Standard (built by the Standard Motor Company of England). A photo of the car with the system fitted is available from the Mitchell Library and the patent design drawing is still available from the Australian Patent Office. reference; "Gilltraps Australian Cars from 1879 – A history of cars built in Australia" (authors Gilltrap T and M) ISBN 0 85558 936 1 (Golden Press Pty Ltd) The next application of front-wheel drive

3080-520: The TA, the DS model, in 1955. Front-wheel drive continued with the 1948 Citroën 2CV , where the air-cooled lightweight aluminium flat twin engine was mounted ahead of the front wheels, but used Hooke type universal joint driveshaft joints, and 1955 Citroën DS , featuring the mid-engine layout. Panhard of France, DKW of Germany and Saab of Sweden offered exclusively front-wheel-drive cars, starting with

3157-612: The United States managed a bit better than its predecessor one decade earlier. These vehicles featured a layout that places the engine behind the transmission, running "backwards," (save for the Cord, which drove the transmission from the front of the engine). The basic front-wheel-drive layout provides sharp turning, and better weight distribution creates "positive handling characteristics" due to its low polar inertia and relatively favourable weight distribution. (The heaviest component

Fiat Cinquecento - Misplaced Pages Continue

3234-557: The United States, and even competed in the 1906 Vanderbilt Cup and the French Grand Prix . In 1912 he began manufacturing a line of wheeled fire engine tractors which used his front-wheel-drive system, but due to lack of sales this venture failed. In Australia in 1915 G.J. Hoskins designed and was granted a patent for his front-wheel-drive system. Based in Burwood NSW Mr Hoskins was a prominent member of

3311-429: The boom in bubble cars that followed. It was the first production front-wheel-drive car with a watercooled inline four-cylinder engine mounted transversely. This allowed eighty percent of the floor plan for the use of passengers and luggage. The majority of modern cars use this configuration. Its progressive rate rubber sprung independent suspension, low centre of gravity, and wheel at each corner with radial tyres, gave

3388-442: The disadvantage that it makes it difficult to achieve 50/50 weight distribution (although they remedy this in four-wheel-drive models by mounting the gearbox at the rear of the transaxle ). The Subaru 1000 appeared in 1966 using front-wheel drive mated to a flat-4 engine, with the driveshafts of equal length extending from the transmission, which addressed some of the issues of the powertrain being somewhat complex and unbalanced in

3465-557: The end production of Lancia Gamma and successfully cloned until today by Subaru . Lancia, however also made front-wheel drive its flagship even in sport cars as the winner of the Rally, Lancia Fulvia , and then with large-scale models with excellent road qualities and performances including Lancia Beta , Lancia Delta , Lancia Thema including the powerful Lancia Thema 8.32 with engine Ferrari and all subsequent models. Ford introduced front-wheel drive to its European customers in 1962 with

3542-439: The engine and gearbox to be located side by side without sharing lubricating fluid while orienting the cooling fan toward fresh air flow. By using the Primula as a test-bed, Fiat was able to sufficiently resolve the layout's disadvantages, including uneven side-to-side power transmission, uneven tire wear and potential torque steer , the tendency for the power of the engine alone to steer the car under heavy acceleration. The problem

3619-807: The engine compartment – the Alfa Romeo Alfasud (and its replacement, the 1983 Alfa 33 as well as the Alfa 145/146 up to the late 1990s) also used the same layout. Honda also introduced several small front-wheel drive vehicles, with the N360 and N600 , the Z360 and Z600 in 1967, the Honda 1300 in 1969, followed by the Honda Civic in 1972 and the Honda Accord in 1976. Also in the 1970s and 1980s,

3696-412: The engine driving the front wheels through an offset final drive and unequal-length driveshafts, combined with MacPherson struts and an independently located radiator – subsequently became common with competitors and arguably an industry standard. The Corporate Average Fuel Economy standard drove a mass changeover of cars in the U.S. to front-wheel drive. The change began in 1978, with

3773-517: The engine power 180 degrees. Power then went to a differential mounted to the transmission case, from which half-shafts took it to the wheels. The driveline was set fairly at centre-point of the wheels for better weight distribution, though this raised the engine, requiring lowered intake systems. Little known outside of Italy, the Primula is today primarily known for innovating the modern economy-car layout. – Hemmings Motor News , August 2011 Front-wheel-drive layout had been highly impacted by

3850-533: The engine. The layout often required the engine be removed to service the clutch. This Active Tourer MPV wants to be more stable than a BMW M3, and using the Dante Giacosa-pattern front-wheel-drive layout compacts the mechanicals and saves space for people in the reduced overall length of what will surely become a production 1-series tall-sedan crossover. – Robert Cumberford , Automobile Magazine , March 2013 As engineered by Dante Giacosa ,

3927-553: The entry level Punto of the same era, mated to a close ratio gearbox. Other additions were a drop in standard ride height, front anti roll bar, 13" alloy wheels, plus colour coded bumpers and mirrors. The interior saw a tachometer added, along with sports seats, red seatbelts and a leather steering wheel and gear knob. It is the Sporting model which gave birth to a rallying trophy and a Group A Kit-Car version. From 1992 to 1996, Fiat also produced and sold an electric variant of

SECTION 50

#1732772579325

4004-402: The front axles of almost every four-wheel or all-wheel drive vehicle. Neither automobile was particularly successful in the open market. In spite of the Cord's hallmark innovation, using CV joints, and being competitively priced against contemporaneous alternatives, the buyers demographic were expecting more than the car's 80 mph (130 km/h) top speed, and combined with the effect of

4081-549: The introduction of the first American-built transverse-engined cars, the Plymouth Horizon and Dodge Omni (based on the European designed Simca Horizon ), followed by the 1980 Chevrolet Citation and numerous other vehicles. Meanwhile, European car makers, that had moved to front-wheel drive decades before, began to homogenize their engine arrangement only in this decade, leaving Saab , Audi (and Volkswagen ) as

4158-469: The lineup later. Although the 704 cc engine was mounted longitudinally , the bigger units were fitted transversely , making the little Fiat one of the few cars in the world available with both configurations at the same time. The smallest engine, intended for sale in Poland only, was a 704 cc OHV two cylinder unit, delivering 31 metric horsepower (23 kW) or 30 metric horsepower (22 kW) with catalyst. Cinquecento inherited this unit from

4235-527: The model on which almost all modern FWD vehicles are now based. Peugeot and Renault on their jointly developed small car engine of the 1970s where the 4-cylinder block was canted over to reduce the overall height of the engine with the transmission mounted on the side of the crankcase in what became popularly known as the "suitcase" arrangement ( PSA X engine ). The tendency of this layout to generate unwanted transmission "whine" has seen it fall out of favour. Also, clutch changes required engine removal. In Japan,

4312-544: The old Fiat 100 series overhead valve engines in the mid-1980s. Mechanically, they are simple inline-four engines with five main bearings crankshaft and overhead cam heads. Since 1985, it has been constructed in different versions. Displacements range from 0.8 to 1.4 L; 46.9 to 83.5 cu in (769 to 1,368 cc). In addition to the 8 valve versions, there are "Super-FIRE" 1.2 and 1.4 L; 75.8 and 83.5 cu in (1,242 and 1,368 cc) 16 valve versions. The "Super-FIRE" which uses 16 valves and

4389-665: The only RWD cars offered by General Motors until the introduction of the Sigma platform . After the phaseout of the Ford Panther platform (except for the Mustang), Ford automobiles (including the Transit Connect van) manufactured for the 2012 model year to present are front-wheel drive; its D3 platform (based on a Volvo platform) has optional all-wheel drive. Fully Integrated Robotised Engine The FIRE series replaced

4466-604: The only manufacturers offering a front-drive longitudinal engine layout. Years before this was the most common layout in Europe, with examples like Citroën DS , Renault 12 , Renault 5 , Renault 25 (a Chrysler LH ancestor) Alfa Romeo 33 , Volkswagen Passat , etc. This transition can be exemplified in the Renault 21 that was offered with disparate engine configurations. The 1.7-litre version featured an "east–west" (transversely) mounted engine, but Renault had no gearbox suitable for

4543-963: The pre-war DKW F8 and F9 reappeared as the IFA F8 and IFA F9 in 1949, followed by the AWZ P70 in 1955, the Wartburg 311 in 1956 and the Trabant in 1958, all with front-wheel drive. The P70 and Trabant had Duroplast bodies, and the Trabant had both a monocoque body and a transversely mounted engine, a modern design in some ways. In 1950 West German makers also reintroduced front-wheel-drive cars: DKW had lost its production facilities in Eisenach (now in DDR) and reestablished itself in Ingolstadt. A version of

4620-405: The pre-war F9 was introduced as the DKW F89. Borgward introduced 2 new makes with front-wheel drive, the Goliath and the Lloyd in 1950. Gutbrod also came with a car in 1950; the Superior, but withdrew the car in 1954 and concentrated on other products. This car is best remembered for its Bosch fuel-injection . In 1955, one of the first Japanese manufacturers to utilize front-wheel drive with

4697-560: The public, and a few months later the Ruxton automobile . The Cord L-29's drive system was again inspired by racing, copying from the Indianapolis 500 -dominating racers, using the same de Dion layout and inboard brakes. Moreover, the Auburn (Indiana) built Cord was the first ever front-wheel drive production car to use constant-velocity joints . These very specific components allow motive power to be delivered to steered wheels more seamlessly than universal joints , and have become common on almost every front-wheel-drive car, including on

SECTION 60

#1732772579325

4774-469: The same transverse-mounted, forward-motor layout as modern front-wheel-drive automobiles. It even resembled the smaller version of its popular Alfa Romeo Giulia . However, due to the financial difficulties in post-war Italy, the 33 never saw production. Had Alfa-Romeo succeed in producing 33, it would have preceded the Mini as the first "modern" European front-wheel-drive compact car. The German car industry resumed from WW2 in 1949/1950. In East Germany (DDR),

4851-415: The standard Sporting alloys. Unlike true Abarth models, there were no engine upgrades available from the factory and the car could not be purchased as a whole separate model. The Abarth parts were to be added by the purchaser at the time of ordering, hence it is common to see cars with only some of the Abarth extras. During the 1990s, a number of concept cars based on the Fiat Cinquecento were developed, by

4928-410: The success of small, inexpensive cars, especially the British Mini . As engineered by Alec Issigonis , the compact arrangement located the transmission and engine sharing a single oil sump – despite disparate lubricating requirements – and had the engine's radiator mounted to the side of the engine, away from the flow of fresh air and drawing heated rather than cool air over

5005-418: The transmission in the sump, and the cooling fan drawing hot air from its side-facing location. Volvo Cars has switched its entire lineup after the 900 series to front-wheel drive. Swedish engineers at the company have said that transversely mounted engines allow for more crumple zone area in a head-on collision. American auto manufacturers are now shifting larger models (such as the Chrysler 300 and most of

5082-474: The transmission-in-sump " Suitcase " engine that it had co-developed with Peugeot in the 1970s for its compact models, starting with the Renault 9 in 1982. Peugeot-Citroen themselves also moved over to the end-on gearbox solution when it phased out the Suitcase unit in favour of the TU-series engine in 1986. Nissan also abandoned the transmission-in-sump concept for its N12-series Cherry/Pulsar in 1982. Perhaps symbolically, British Leyland themselves, heirs to

5159-531: The two "last Super-FIRE" being produced in Brazil were the reworked (New pistons and crankshaft) 1.0 8V (77 PS) and the 1.4 8V VVT (90 PS), both running on petrol or ethanol fuels. Starting in 2016, it is being replaced by the GSE (FireFly) engine family. The FIRE engine has been available in the following displacements: As part of the June 10, 2009 Operating Agreement, Chrysler's commercial production of Fully Integrated Robotized Engine began in its Dundee, Michigan facility . Chrysler's first FIRE engine model,

5236-473: The use of constant velocity jointed drive axles, along with front wheel drive has evolved into the modern-day mass-market automobile. Some suggest that the introduction of the modern Volkswagen Golf in 1974, from a traditional U.S. competitor, and the introduction of the 1973 Honda Civic , and the 1976 Honda Accord served as a wake-up call for the "Big Three" (only Chrysler already produced front-wheel-drive vehicles in their operations outside North America). GM

5313-401: The veteran Fiat 100 OHV four cylinder engine, which saw service in many small Fiat models, starting with Fiat 850 . (This engine dates back to the initial 633 cc unit as introduced in the 1955 FIAT 600.) It was fitted with single point fuel injection and was the base engine in most markets. Due to fiscal limitations, the displacement of this unit was limited to 899 cc in 1993, with

5390-493: Was even later with the 1979 Vauxhall Astra / Opel Kadett . Captive imports were the US car makers initial response to the increased demand for economy cars . The popularity of front-wheel drive began to gain momentum, with the 1981 Ford Escort , the 1982 Nissan Sentra , and the 1983 Toyota Corolla . Front-wheel drive became the norm for mid-sized cars starting with the 1982 Chevrolet Celebrity , 1982 Toyota Camry , 1983 Dodge 600 , 1985 Nissan Maxima , 1986 Honda Legend , and

5467-408: Was held at the Indianapolis Motor Speedway on Saturday, 30 May 1925. However, the idea of front-wheel drive languished outside the motor racing arena as few manufacturers attempted the same for production automobiles. Alvis Cars did introduce a commercial model of the front-wheel drive 12/50 racer in 1928, but it was not a success. In France, Jean-Albert Grégoire and Pierre Fenaille developed

5544-486: Was largely solved by making the shorter driveshaft solid, and the longer one hollow, to ensure both shafts experienced elastic twist which was roughly the same. After the 128, Fiat further demonstrated the layout's flexibility, re-configurating the 128 drive train as a mid-engined layout for the Fiat X1/9 . The compact, efficient Giacosa layout – a transversely-mounted engine with transmission mounted beside

5621-446: Was originally a carbureted engine, and later progressed to single-point injection (SPI), then to multi-point fuel injection (MPI), using sequential multi-port fuel injection (SMPI) today. It is now used in the 750 Formula in a slightly modified state. Brazilian production started in 2000 with the "Super-FIRE" 1.2 16V (80 PS), was extended until 2006 with 1.0 8V (54 PS), 1.0 16V (69 PS), 1.2 8V (66 PS) and 1.4 8V (80 PS). By 2016,

5698-642: Was the Lohner–Porsche of 1897 with an electric motor in each front wheel, produced by Lohner-Werke in Vienna. It was developed by Ferdinand Porsche in 1897 based on a concept developed by American inventor Wellington Adams . Porsche also raced it in 1897. J. Walter Christie of the United States patented a design for a front-wheel-drive car, the first prototype of which he built in 1904. He promoted and demonstrated several such vehicles, notably with transversely mounted engines, by racing at various speedways in

5775-669: Was the supercharged Alvis 12/50 racing car designed by George Thomas Smith-Clarke and William M. Dunn of Alvis Cars of the United Kingdom. This vehicle was entered in the 1925 Kop Hill Climb in Princes Risborough in Buckinghamshire on 28 March 1925. Harry Arminius Miller of Menomonie, Wisconsin designed the Miller 122 front-wheel drive race-car that was entered in the 1925 Indianapolis 500 , which

5852-401: Was to create the happy combination of a low centre of gravity boxer engine (flat four) with a special frame. Due to post-war financial problems Cemsa could not continue production, but the project was resumed when taken on by Lancia in the 50s. In 1954, Alfa-Romeo had experimented with its first front-wheel-drive compact car named "33" (not related to the sports car similarly named "33"). It had

5929-596: Was unassisted rack and pinion. Options included central locking, power windows, sunroof, full-length retractable canvas roof, split rear seat, headlight range adjustment, and air conditioning. The right hand drive version for the British market was launched in June 1993, as one of the few city cars marketed in the UK. The Cinquecento was initially available with two engine choices, with the 1.1 L FIRE or "sporting" joining

#324675