82-435: The Ligne à Grande Vitesse Est européenne (East European High Speed Line), typically shortened to LGV Est , is a French high-speed rail line that connects Vaires-sur-Marne (near Paris ) and Vendenheim (near Strasbourg ). The line halved the travel time between Paris and Strasbourg and provides fast services between Paris and the principal cities of Eastern France as well as Luxembourg and Germany . The LGV Est
164-408: A carbody design that would reduce wind resistance at high speeds. A long series of tests was carried. In 1905, St. Louis Car Company built a railcar for the traction magnate Henry E. Huntington , capable of speeds approaching 160 km/h (100 mph). Once it ran 32 km (20 mi) between Los Angeles and Long Beach in 15 minutes, an average speed of 130 km/h (80 mph). However, it
246-409: A complete redesign of the project, with an endpoint of the line at Épernay and from there onwards the adaptation of the existing Paris-Strasbourg line to accommodate high-speed tilting trains . In Nancy, which this route favored, this route was championed locally by Gérard Lignac, director of the L'Est Républicain newspaper. Although a budget was not completed and the planned phasing of the project
328-579: A corridor from Paris to Munich. However, the expected passenger traffic along this corridor was quite low, unlike Paris-Lyon and Paris-Brussels/London corridors, and a direct route crossed a region of eastern France far from any major urban area. In 1986, MP Marc Reymann submitted to the government a route that shared a common trunk line between the LGV Nord and LGV Est from Paris, through Charles de Gaulle Airport , to Soissons before forking into lines to Brussels (LGV Nord) and Strasbourg (LGV Est). In 1988,
410-578: A high-speed railway network in Russian gauge . There are no narrow gauge high-speed railways. Countries whose legacy network is entirely or mostly of a different gauge than 1435mm – including Japan and Spain – have however often opted to build their high speed lines to standard gauge instead of the legacy railway gauge. High-speed rail is the fastest and most efficient ground-based method of commercial transportation. However, due to requirements for large track curves, gentle gradients and grade separated track
492-589: A master plan of fast intercity connections in continental Europe. Its connection between Paris and Strasbourg was very similar to the route of the LGV Est. The UIC master plan called for this line to be constructed shortly after Paris-Lyon and Paris-Brussels lines. In 1974, the director of SNCF confirmed that the company wanted to follow the UIC master plan. Germany, which was developing the Transrapid maglev system,
574-546: A new top speed for a regular service, with a top speed of 160 km/h (99 mph). This train was a streamlined multi-powered unit, albeit diesel, and used Jakobs bogies . Following the success of the Hamburg line, the steam-powered Henschel-Wegmann Train was developed and introduced in June 1936 for service from Berlin to Dresden , with a regular top speed of 160 km/h (99 mph). Incidentally no train service since
656-492: A series of increasingly high speed runs, the official speed record attempt took place on 3 April 2007. The top speed of 574.8 km/h (159.7 m/s, 357.2 mph) was reached at kilometre point 193 near the village of Le Chemin, between the Meuse and Champagne-Ardenne TGV stations, where the most favourable profile exists. The 515.3 km/h (320.2 mph) speed record of 1990 was unofficially broken multiple times during
738-555: A some other interurban rail cars reached about 145 km/h (90 mph) in commercial traffic. The Red Devils weighed only 22 tons though they could seat 44 passengers. Extensive wind tunnel research – the first in the railway industry – was done before J. G. Brill in 1931 built the Bullet cars for Philadelphia and Western Railroad (P&W). They were capable of running at 148 km/h (92 mph). Some of them were almost 60 years in service. P&W's Norristown High Speed Line
820-569: A world record for narrow gauge trains at 145 km/h (90 mph), giving the Odakyu engineers confidence they could safely and reliably build even faster trains at standard gauge. Conventional Japanese railways up until that point had largely been built in the 1,067 mm ( 3 ft 6 in ) Cape gauge , however widening the tracks to standard gauge ( 1,435 mm ( 4 ft 8 + 1 ⁄ 2 in )) would make very high-speed rail much simpler due to improved stability of
902-491: Is a segment of the Main Line for Europe project to connect Paris with Budapest with high-speed rail service. The line was built in two phases. Construction on the 300 km (190 mi) from Vaires-sur-Marne to Baudrecourt (near Metz and Nancy ) began in 2004; the first phase entered into service in June 2007. Construction on the 106 km (66 mi) second phase from Baudrecourt to Vendenheim began in June 2010;
SECTION 10
#1732772932189984-476: Is a set of unique features, not merely a train travelling above a particular speed. Many conventionally hauled trains are able to reach 200 km/h (124 mph) in commercial service but are not considered to be high-speed trains. These include the French SNCF Intercités and German DB IC . The criterion of 200 km/h (124 mph) is selected for several reasons; above this speed,
1066-459: Is a type of rail transport network utilizing trains that run significantly faster than those of traditional rail, using an integrated system of specialized rolling stock and dedicated tracks . While there is no single standard that applies worldwide, lines built to handle speeds above 250 km/h (155 mph) or upgraded lines in excess of 200 km/h (125 mph) are widely considered to be high-speed. The first high-speed rail system,
1148-611: Is initially operating at a maximum speed of 320 km/h (200 mph), and was the fastest service in the world at average speed of 279.3 km/h (173.5 mph) between Lorraine and Champagne until the Wuhan–Guangzhou High-Speed Railway opened in 2009. It is the first line in France to travel at this maximum speed in commercial service, the first in France to use ERTMS , the new European rail signalling system and
1230-539: Is still in use, almost 110 years after P&W in 1907 opened their double-track Upper Darby–Strafford line without a single grade crossing with roads or other railways. The entire line was governed by an absolute block signal system. On 15 May 1933, the Deutsche Reichsbahn-Gesellschaft company introduced the diesel-powered " Fliegender Hamburger " in regular service between Hamburg and Berlin (286 km or 178 mi), thereby achieving
1312-443: Is the first time there has been competition for the construction of a TGV line since reform of the rail system in 1997 and the involvement of RFF. SNCF Engineering, in partnership with EEG Simecsol succeeded in obtaining four of the contracts (including one for the second phase), this being 50% of the civil engineering project. Moreover, it directed the entire superstructure works project (track, signals and electrification) under
1394-477: Is united, a symbol of European France , of the knowledge of French businesses, and a symbol that gives confidence in the future." He hailed this achievement as "a union by train between France and its German , Luxembourgish , and Swiss partners, between the European institutions and the [French] capital." On 2 September 2009, infrastructure manager RFF announced the tendering for the second phase. Financing
1476-619: The Chicago-New York Electric Air Line Railroad project to reduce the running time between the two big cities to ten hours by using electric 160 km/h (99 mph) locomotives. After seven years of effort, however, less than 50 km (31 mi) of arrow-straight track was finished. A part of the line is still used as one of the last interurbans in the US. In the US, some of the interurbans (i.e. trams or streetcars which run from city to city) of
1558-553: The 0 Series Shinkansen , built by Kawasaki Heavy Industries – in English often called "Bullet Trains", after the original Japanese name Dangan Ressha ( 弾丸列車 ) – outclassed the earlier fast trains in commercial service. They traversed the 515 km (320 mi) distance in 3 hours 10 minutes, reaching a top speed of 210 km/h (130 mph) and sustaining an average speed of 162.8 km/h (101.2 mph) with stops at Nagoya and Kyoto. Speed
1640-681: The Aérotrain , a French hovercraft monorail train prototype, reached 200 km/h (120 mph) within days of operation. After the successful introduction of the Japanese Shinkansen in 1964, at 210 km/h (130 mph), the German demonstrations up to 200 km/h (120 mph) in 1965, and the proof-of-concept jet-powered Aérotrain , SNCF ran its fastest trains at 160 km/h (99 mph). In 1966, French Infrastructure Minister Edgard Pisani consulted engineers and gave
1722-520: The East European TGV Association ( French : l'Association TGV Est-Européen ), which managed to bring together local authorities to support the project. The LGV Est is a direct result of a project begun in 1985 with the establishment of a working group chaired by Claude Rattier and later by Philippe Essig. Their report provided the basis for preliminary design studies conducted in 1992–93. The initial 1980s plan extended along
SECTION 20
#17327729321891804-574: The European Council meeting in Essen in 1994 , the LGV Est project was reaffirmed as a priority trans-European transport project. The expected socio-economic benefits of the LGV project was lower than other ongoing high-speed rail projects: LGV Bretagne-Pays de la Loire and LGV Bordeaux–Toulouse . The line is redundant to three existing rail lines: Paris to Strasbourg , Paris to Mulhouse , and
1886-557: The European institutions in Strasbourg , and geographical balance of French high-speed rail lines, following the construction of high-speed lines from Paris to the southeast ( LGV Sud-Est , LGV Rhône-Alpes , & LGV Méditerranée ), the southwest ( LGV Atlantique ), and north ( LGV Nord ). A public inquiry was conducted in 1994. The following year, a report conducted at the request of the Transport Minister advocated
1968-590: The Marienfelde – Zossen line during 1902 and 1903 (see Experimental three-phase railcar ). On 23 October 1903, the S&;H-equipped railcar achieved a speed of 206.7 km/h (128.4 mph) and on 27 October the AEG-equipped railcar achieved 210.2 km/h (130.6 mph). These trains demonstrated the feasibility of electric high-speed rail; however, regularly scheduled electric high-speed rail travel
2050-647: The Morning Hiawatha service, hauled at 160 km/h (99 mph) by steam locomotives. In 1939, the largest railroad of the world, the Pennsylvania Railroad introduced a duplex steam engine Class S1 , which was designed to be capable of hauling 1200 tons passenger trains at 161 km/h (100 mph). The S1 engine was assigned to power the popular all-coach overnight premier train the Trail Blazer between New York and Chicago since
2132-545: The Prussian state railway joined with ten electrical and engineering firms and electrified 72 km (45 mi) of military owned railway between Marienfelde and Zossen . The line used three-phase current at 10 kilovolts and 45 Hz . The Van der Zypen & Charlier company of Deutz, Cologne built two railcars, one fitted with electrical equipment from Siemens-Halske , the second with equipment from Allgemeine Elektrizitäts-Gesellschaft (AEG), that were tested on
2214-729: The Tōkaidō Shinkansen , began operations in Honshu , Japan, in 1964. Due to the streamlined spitzer -shaped nose cone of the trains , the system also became known by its English nickname bullet train . Japan's example was followed by several European countries, initially in Italy with the Direttissima line, followed shortly thereafter by France , Germany , and Spain . Today, much of Europe has an extensive network with numerous international connections. More recent construction since
2296-532: The United Kingdom , the United States , and Uzbekistan . Only in continental Europe and Asia does high-speed rail cross international borders. High-speed trains mostly operate on standard gauge tracks of continuously welded rail on grade-separated rights of way with large radii . However, certain regions with wider legacy railways , including Russia and Uzbekistan, have sought to develop
2378-474: The World Bank , whilst supporting the project, considered the design of the equipment as unproven for that speed, and set the maximum speed to 210 km/h (130 mph). After initial feasibility tests, the plan was fast-tracked and construction of the first section of the line started on 20 April 1959. In 1963, on the new track, test runs hit a top speed of 256 km/h (159 mph). Five years after
2460-565: The fastest conventional rail vehicle and fastest passenger train on a national rail system (as opposed to dedicated test track). The line passes through the French regions of Île-de-France and Grand Est . The first 300 km (190 mi) section of this new route, linking Vaires-sur-Marne near Paris to Baudrecourt in the Moselle, opened on 10 June 2007. Constructed for speeds up to 350 km/h (220 mph), for commercial service it
2542-573: The 21st century has led to China taking a leading role in high-speed rail. As of 2023 , China's HSR network accounted for over two-thirds of the world's total. In addition to these, many other countries have developed high-speed rail infrastructure to connect major cities, including: Austria , Belgium , Denmark , Finland , Greece , Indonesia , Morocco , the Netherlands , Norway , Poland , Portugal , Russia , Saudi Arabia , Serbia , South Korea , Sweden , Switzerland , Taiwan , Turkey ,
LGV Est - Misplaced Pages Continue
2624-642: The French National Railway started to receive their new powerful CC 7100 electric locomotives, and began to study and evaluate running at higher speeds. In 1954, the CC 7121 hauling a full train achieved a record 243 km/h (151 mph) during a test on standard track. The next year, two specially tuned electric locomotives, the CC 7107 and the prototype BB 9004, broke previous speed records, reaching respectively 320 km/h (200 mph) and 331 km/h (206 mph), again on standard track. For
2706-565: The French National Railways twelve months to raise speeds to 200 km/h (120 mph). The classic line Paris– Toulouse was chosen, and fitted, to support 200 km/h (120 mph) rather than 140 km/h (87 mph). Some improvements were set, notably the signals system, development of on board "in-cab" signalling system, and curve revision. The next year, in May 1967, a regular service at 200 km/h (120 mph)
2788-440: The German government agreed to a rail line from Paris to Frankfurt via Saarbrücken . The following year, Philippe Essig presented the route that would later be built and at the same time addressed the other problem: financing. This route, further north than previous proposals, served Reims and Strasbourg. In order to avoid offending the cities of Nancy and Metz, which share an ancient rivalry, and avoid problems encountered during
2870-424: The LGV Est at Vandières . Besides the construction of the LGV, the project includes: Journey times have decreased as follows: Earthworks for the first phase between Vaires-sur-Marne and Baudrecourt started in spring 2002. The contractors took three years to complete the earthworks and some 327 pieces of structural work as well as re-establishing communications for people and wildlife. Tracklaying and building
2952-606: The US, 160 km/h (99 mph) in Germany and 125 mph (201 km/h) in Britain. Above those speeds positive train control or the European Train Control System becomes necessary or legally mandatory. National domestic standards may vary from the international ones. Railways were the first form of rapid land transportation and had an effective monopoly on long-distance passenger traffic until
3034-579: The beginning of the construction work, in October 1964, just in time for the Olympic Games , the first modern high-speed rail, the Tōkaidō Shinkansen , was opened between the two cities; a 510 km (320 mi) line between Tokyo and Ōsaka. As a result of its speeds, the Shinkansen earned international publicity and praise, and it was dubbed the "bullet train." The first Shinkansen trains,
3116-443: The cancelation of this express train in 1939 has traveled between the two cities in a faster time as of 2018 . In August 2019, the travel time between Dresden-Neustadt and Berlin-Südkreuz was 102 minutes. See Berlin–Dresden railway . Further development allowed the usage of these "Fliegenden Züge" (flying trains) on a rail network across Germany. The "Diesel-Schnelltriebwagen-Netz" (diesel high-speed-vehicle network) had been in
3198-453: The combined Ligne de Trilport à Bazoches [ fr ] and Reims-Metz [ fr ] lines. Additionally, the international potential of the planned line seemed low, as Germany had little interest in the development of high-speed lines, favored domestic north–south axes, and due to the competition between SNCF and Deutsche Bahn . The decision to build the line is politically motivated by fostering European integration, serving
3280-455: The completion of the second phase, TGV trains continued from here towards Strasbourg on the older (lower-speed) existing Paris-Strasbourg track. The second phase traversed 106 km (66 mi) of rougher terrain from Baudrecourt to Vendenheim , on the northern edge of the Strasbourg metropolitan area. Construction on the second phase began in August 2010 and it opened on 3 July 2016. Between
3362-562: The construction of high-speed rail is more costly than conventional rail and therefore does not always present an economical advantage over conventional speed rail. Multiple definitions for high-speed rail are in use worldwide. The European Union Directive 96/48/EC, Annex 1 (see also Trans-European high-speed rail network ) defines high-speed rail in terms of: The International Union of Railways (UIC) identifies three categories of high-speed rail: A third definition of high-speed and very high-speed rail requires simultaneous fulfilment of
LGV Est - Misplaced Pages Continue
3444-521: The construction of the A4 autoroute twenty years earlier, this route traveled directly to Strasbourg and passed midway between Nancy and Metz, where a single station would be built to serve both towns and improve relations between them. Financing of this proposal called for contributions from local governments—a first in France for construction of a high-speed line—and the Grand Duchy of Luxembourg . This
3526-464: The curve radius should be quadrupled; the same was true for the acceleration and braking distances. In 1891 engineer Károly Zipernowsky proposed a high-speed line from Vienna to Budapest for electric railcars at 250 km/h (160 mph). In 1893 Wellington Adams proposed an air-line from Chicago to St. Louis of 252 miles (406 km), at a speed of only 160 km/h (99 mph). Alexander C. Miller had greater ambitions. In 1906, he launched
3608-603: The deputy director Marcel Tessier at the DETE ( SNCF Electric traction study department). JNR engineers returned to Japan with a number of ideas and technologies they would use on their future trains, including alternating current for rail traction, and international standard gauge. In 1957, the engineers at the private Odakyu Electric Railway in Greater Tokyo Area launched the Odakyu 3000 series SE EMU. This EMU set
3690-508: The development of the motor car and airliners in the early-mid 20th century. Speed had always been an important factor for railroads and they constantly tried to achieve higher speeds and decrease journey times. Rail transportation in the late 19th century was not much slower than non-high-speed trains today, and many railroads regularly operated relatively fast express trains which averaged speeds of around 100 km/h (62 mph). High-speed rail development began in Germany in 1899 when
3772-595: The early 20th century were very high-speed for their time (also Europe had and still does have some interurbans). Several high-speed rail technologies have their origin in the interurban field. In 1903 – 30 years before the conventional railways started to streamline their trains – the officials of the Louisiana Purchase Exposition organised the Electric Railway Test Commission to conduct a series of tests to develop
3854-503: The first line also served by German ICE trains. The second phase includes the 4,200-metre (13,800 ft) Saverne Tunnel . The signalling centre for the line is at Pagny-sur-Moselle . In 1969, Metz politician Raymond Mondon requested a study of a fast train from Paris to Strasbourg along the route of the planned A4 autoroute . In 1970–71, the International Union of Railways (UIC, based on its French acronym) developed
3936-438: The first time, 300 km/h (185 mph) was surpassed, allowing the idea of higher-speed services to be developed and further engineering studies commenced. Especially, during the 1955 records, a dangerous hunting oscillation , the swaying of the bogies which leads to dynamic instability and potential derailment was discovered. This problem was solved by yaw dampers which enabled safe running at high speeds today. Research
4018-575: The following two conditions: The UIC prefers to use "definitions" (plural) because they consider that there is no single standard definition of high-speed rail, nor even standard usage of the terms ("high speed", or "very high speed"). They make use of the European EC Directive 96/48, stating that high speed is a combination of all the elements which constitute the system: infrastructure, rolling stock and operating conditions. The International Union of Railways states that high-speed rail
4100-414: The impacts of geometric defects are intensified, track adhesion is decreased, aerodynamic resistance is greatly increased, pressure fluctuations within tunnels cause passenger discomfort, and it becomes difficult for drivers to identify trackside signalling. Standard signaling equipment is often limited to speeds below 200 km/h (124 mph), with the traditional limits of 127 km/h (79 mph) in
4182-461: The initial ones despite greater speeds). After decades of research and successful testing on a 43 km (27 mi) test track, in 2014 JR Central began constructing a Maglev Shinkansen line, which is known as the Chūō Shinkansen . These Maglev trains still have the traditional underlying tracks and the cars have wheels. This serves a practical purpose at stations and a safety purpose out on
SECTION 50
#17327729321894264-542: The late 1940s and it consistently reached 161 km/h (100 mph) in its service life. These were the last "high-speed" trains to use steam power. In 1936, the Twin Cities Zephyr entered service, from Chicago to Minneapolis, with an average speed of 101 km/h (63 mph). Many of these streamliners posted travel times comparable to or even better than their modern Amtrak successors, which are limited to 127 km/h (79 mph) top speed on most of
4346-525: The line from Baudrecourt to Strasbourg was signed. Construction of the line was divided into two phases. The first phase traverses 300 km (190 mi) of relatively flat land from Vaires-sur-Marne (20 km (12 mi) east of Paris) to Baudrecourt (between Metz and Nancy ), where it intersects the Metz–Saarbrücken and Paris-Strasbourg rail lines. Construction on the first phase began in 2002 and it entered into service on 10 June 2007. Until
4428-404: The line. The final weld of rails on the second phase took place on 31 March 2015 and was accompanied by a ceremony marking the end of construction of Phase 2, although work on signaling continued. The opening of the second phase had been scheduled for 3 April 2016, but was delayed after a train derailed near Eckwersheim during commissioning trials, resulting in 11 deaths and damage to a bridge on
4510-494: The line. The line opened on 3 July 2016. A landslide in March 2020 caused a derailment, with 22 minor injuries, and one serious. A series of high speed trials, named Operation V150, were conducted on the LGV Est prior to its June 2007 opening using a specially modified train. The trials were conducted jointly by SNCF , TGV builder Alstom , and LGV Est owner Réseau Ferré de France between 15 January 2007 and 15 April 2007. Following
4592-432: The lines in the event of a power failure. However, in normal operation, the wheels are raised up into the car as the train reaches certain speeds where the magnetic levitation effect takes over. It will link Tokyo and Osaka by 2037, with the section from Tokyo to Nagoya expected to be operational by 2027. Maximum speed is anticipated at 505 km/h (314 mph). The first generation train can be ridden by tourists visiting
4674-505: The network. The German high-speed service was followed in Italy in 1938 with an electric-multiple-unit ETR 200 , designed for 200 km/h (120 mph), between Bologna and Naples. It too reached 160 km/h (99 mph) in commercial service, and achieved a world mean speed record of 203 km/h (126 mph) between Florence and Milan in 1938. In Great Britain in the same year, the streamlined steam locomotive Mallard achieved
4756-770: The new stations started in 2004. As the first infrastructure project of its kind to be declared a public utility by the Ministry of the Environment, the LGV Est is also the first railway to be financed largely by the French regions and the European Union (EU). The main contractor for the project is RFF ( Réseau ferré de France ), the state-owned company responsible for managing the French rail infrastructure. Civil engineering works were distributed in eight contracts which were awarded after bidding by five companies: SNCF , ISL , Tractebel, Scétauroute and Setec . This
4838-469: The official world speed record for steam locomotives at 202.58 km/h (125.88 mph). The external combustion engines and boilers on steam locomotives were large, heavy and time and labor-intensive to maintain, and the days of steam for high speed were numbered. In 1945, a Spanish engineer, Alejandro Goicoechea , developed a streamlined, articulated train that was able to run on existing tracks at higher speeds than contemporary passenger trains. This
4920-600: The opening of the first and second phases, trains from Strasbourg, Colmar, and southern Germany travelled along the classic Paris-Strasbourg line until Réding , then the Réding–Metz railway [ fr ] to join the LGV Est at Baudrecourt. However, trains from Nancy and Sarrebourg traveled along the Paris-Strasbourg line until Frouard , then took the Frouard–Novéant railway [ fr ] to join
5002-555: The planning since 1934 but it never reached its envisaged size. All high-speed service stopped in August 1939 shortly before the outbreak of World War II . On 26 May 1934, one year after Fliegender Hamburger introduction, the Burlington Railroad set an average speed record on long distance with their new streamlined train, the Zephyr , at 124 km/h (77 mph) with peaks at 185 km/h (115 mph). The Zephyr
SECTION 60
#17327729321895084-439: The project was added to the master plan of high-speed lines, in which it was classified as a priority project. On 22 May 1992, France and Germany agreed to a Franco-German high-speed line consisting of a northern branch through Saarbrücken and Mannheim and a southern branch through Strasbourg and Karlsruhe . The same year a similar memorandum of understanding was signed between the transport ministers of France and Luxembourg. At
5166-452: The project, and limited the route to Baudrecourt, to which the Alsace region threatened to withdraw its financial contribution to the project. After long delays under the successive governments, all wanting to limit the cost of the project, a two-phase project was finally accepted by all parties, provided that commitments were made for the quick completion of the second phase. On 1 April 1992,
5248-791: The responsibility of Réseau Ferré de France . On 9 June 2007, the TGV Est made its inaugural voyage, leaving from the Gare de l'Est at 7:36am. Notable passengers included: François Fillon , the French Prime Minister, Alain Juppé , the Minister of Sustainable Development, and the Argentinian Ambassador to France. The Prime Minister hailed this event as "a beautiful symbol of the capacity of our country to innovate when it
5330-444: The second phase opened to commercial service on 3 July 2016. Opening of the second phase was delayed after a train derailed near Eckwersheim on 14 November 2015 during commissioning trials, resulting in 11 deaths. A specially modified train performed a series of high-speed tests on the first phase of the LGV Est prior to its opening. In April 2007, it reached a top speed of 574.8 km/h (159.6 m/s, 357.2 mph), becoming
5412-427: The test campaign that preceded and followed the certified record attempt, the first time on 13 February 2007 with a speed of 554.3 km/h (344.4 mph), and the last time on 15 April 2007 with a speed of 542.9 km/h (337.3 mph). The total cost was about €4 billion, apportioned as follows: The LGV Est was a subject of public debate for several reasons: High-speed rail High-speed rail ( HSR )
5494-535: The test track. China is developing two separate high-speed maglev systems. In Europe, high-speed rail began during the International Transport Fair in Munich in June 1965, when Dr Öpfering, the director of Deutsche Bundesbahn (German Federal Railways), performed 347 demonstrations at 200 km/h (120 mph) between Munich and Augsburg by DB Class 103 hauled trains. The same year
5576-540: The wider rail gauge, and thus standard gauge was adopted for high-speed service. With the sole exceptions of Russia, Finland, and Uzbekistan all high-speed rail lines in the world are still standard gauge, even in countries where the preferred gauge for legacy lines is different. The new service, named Shinkansen (meaning new main line ) would provide a new alignment, 25% wider standard gauge utilising continuously welded rails between Tokyo and Osaka with new rolling stock, designed for 250 km/h (160 mph). However,
5658-629: The world's population, without a single train passenger fatality. (Suicides, passengers falling off the platforms, and industrial accidents have resulted in fatalities.) Since their introduction, Japan's Shinkansen systems have been undergoing constant improvement, not only increasing line speeds. Over a dozen train models have been produced, addressing diverse issues such as tunnel boom noise, vibration, aerodynamic drag , lines with lower patronage ("Mini shinkansen"), earthquake and typhoon safety, braking distance , problems due to snow, and energy consumption (newer trains are twice as energy-efficient as
5740-413: Was a favorable financial arrangement for SNCF due to low ridership projections and because the population of the towns served were below a threshold for building a high-speed line. The complexity of financing resulted in the long delay of the project. Under the government of Pierre Bérégovoy (French Prime Minister from 1992 to 1993), the government refused to contribute more than 25 billion francs to
5822-470: Was achieved by providing the locomotive and cars with a unique axle system that used one axle set per car end, connected by a Y-bar coupler. Amongst other advantages, the centre of mass was only half as high as usual. This system became famous under the name of Talgo ( Tren Articulado Ligero Goicoechea Oriol ), and for half a century was the main Spanish provider of high-speed trains. In the early 1950s,
5904-530: Was also made about "current harnessing" at high-speed by the pantographs, which was solved 20 years later by the Zébulon TGV 's prototype. With some 45 million people living in the densely populated Tokyo– Osaka corridor, congestion on road and rail became a serious problem after World War II , and the Japanese government began thinking about ways to transport people in and between cities. Because Japan
5986-403: Was extended a further 161 km (100 mi), and further construction has resulted in the network expanding to 2,951 km (1,834 mi) of high speed lines as of 2024, with a further 211 km (131 mi) of extensions currently under construction and due to open in 2031. The cumulative patronage on the entire system since 1964 is over 10 billion, the equivalent of approximately 140% of
6068-479: Was finalized on 1 September 2009, with a mix of sources ranging from the French and Luxembourgish governments, regional governments, the EU, and RFF. The full line was planned to open on 3 April 2016, but that opening was delayed to 3 July by a major accident during testing of the line. Until then, TGV ran between these two cities via the existing Metz - Strasbourg line at the 160 km/h (99 mph) normal speed for
6150-569: Was long reserved about the TGV system being developed by France. A 1975 study concluded that the passenger traffic to only Alsace and Lorraine would not be enough for the financial feasibility of the line. In 1982, recognizing German reluctance to extend the line into Germany, SNCF president André Chadeau announced that the company would not build the LGV Est without government subsidies. The following year, Saverne engineer Charles Maetz convinced MPs Adrien Zeller and François Grussenmeyer to establish
6232-543: Was made of stainless steel and, like the Fliegender Hamburger, was diesel powered, articulated with Jacobs bogies , and could reach 160 km/h (99 mph) as commercial speed. The new service was inaugurated 11 November 1934, traveling between Kansas City and Lincoln , but at a lower speed than the record, on average speed 74 km/h (46 mph). In 1935, the Milwaukee Road introduced
6314-407: Was not only a part of the Shinkansen revolution: the Shinkansen offered high-speed rail travel to the masses. The first Bullet trains had 12 cars and later versions had up to 16, and double-deck trains further increased the capacity. After three years, more than 100 million passengers had used the trains, and the milestone of the first one billion passengers was reached in 1976. In 1972, the line
6396-423: Was opposed by Lorraine and Alsace, the déclaration d'utilité publique was signed on 14 May 1996, two days before the deadline after which a new public inquiry would have been required. A protocol for the construction and financing of the LGV Est was signed between the national government, RFF, SNCF, and local governments. The financing agreement for the first phase of the line from Vaires-sur-Marne to Baudrecourt
6478-472: Was resource limited and did not want to import petroleum for security reasons, energy-efficient high-speed rail was an attractive potential solution. Japanese National Railways (JNR) engineers began to study the development of a high-speed regular mass transit service. In 1955, they were present at the Lille 's Electrotechnology Congress in France, and during a 6-month visit, the head engineer of JNR accompanied
6560-486: Was signed on 7 December 2000 between the numerous partners in the project, including 17 local governments. On 18 December 2003, the Jean-Pierre Raffarin government announced that it would proceed with several TGV projects, including construction of the second phase of the LGV Est, which would begin in 2010. On 24 January 2007, the financial arrangements for studies and preparatory work for the second phase of
6642-402: Was still more than 30 years away. After the breakthrough of electric railroads, it was clearly the infrastructure – especially the cost of it – which hampered the introduction of high-speed rail. Several disasters happened – derailments, head-on collisions on single-track lines, collisions with road traffic at grade crossings, etc. The physical laws were well-known, i.e. if the speed was doubled,
6724-477: Was too heavy for much of the tracks, so Cincinnati Car Company , J. G. Brill and others pioneered lightweight constructions, use of aluminium alloys, and low-level bogies which could operate smoothly at extremely high speeds on rough interurban tracks. Westinghouse and General Electric designed motors compact enough to be mounted on the bogies. From 1930 on, the Red Devils from Cincinnati Car Company and
#188811