80-738: The Mohaka Viaduct is a railway viaduct spanning the Mohaka River in northern Hawke’s Bay , on the East Coast of the North Island of New Zealand , near the small settlement of Raupunga . It was built between 1930 and 1937 by the Public Works Department (PWD) for the New Zealand Railways Department (NZR). It is 276.8 metres (908 ft) in length, and at 95 metres (312 ft),
160-408: A crank on a driving axle. Steam locomotives have been phased out in most parts of the world for economical and safety reasons, although many are preserved in working order by heritage railways . Electric locomotives draw power from a stationary source via an overhead wire or third rail . Some also or instead use a battery . In locomotives that are powered by high-voltage alternating current ,
240-586: A dining car . Some lines also provide over-night services with sleeping cars . Some long-haul trains have been given a specific name . Regional trains are medium distance trains that connect cities with outlying, surrounding areas, or provide a regional service, making more stops and having lower speeds. Commuter trains serve suburbs of urban areas, providing a daily commuting service. Airport rail links provide quick access from city centres to airports . High-speed rail are special inter-city trains that operate at much higher speeds than conventional railways,
320-731: A fourth rail system in 1890 on the City and South London Railway , now part of the London Underground Northern line . This was the first major railway to use electric traction . The world's first deep-level electric railway, it runs from the City of London , under the River Thames , to Stockwell in south London. The first practical AC electric locomotive was designed by Charles Brown , then working for Oerlikon , Zürich. In 1891, Brown had demonstrated long-distance power transmission, using three-phase AC , between
400-542: A funicular railway at the Hohensalzburg Fortress in Austria. The line originally used wooden rails and a hemp haulage rope and was operated by human or animal power, through a treadwheel . The line is still operational, although in updated form and is possibly the oldest operational railway. Wagonways (or tramways ) using wooden rails, hauled by horses, started appearing in the 1550s to facilitate
480-492: A hydro-electric plant at Lauffen am Neckar and Frankfurt am Main West, a distance of 280 km (170 mi). Using experience he had gained while working for Jean Heilmann on steam–electric locomotive designs, Brown observed that three-phase motors had a higher power-to-weight ratio than DC motors and, because of the absence of a commutator , were simpler to manufacture and maintain. However, they were much larger than
560-431: A steam engine that provides adhesion. Coal , petroleum , or wood is burned in a firebox , boiling water in the boiler to create pressurized steam. The steam travels through the smokebox before leaving via the chimney or smoke stack. In the process, it powers a piston that transmits power directly through a connecting rod (US: main rod) and a crankpin (US: wristpin) on the driving wheel (US main driver) or to
640-469: A transformer in the locomotive converts the high-voltage low-current power to low-voltage high current used in the traction motors that power the wheels. Modern locomotives may use three-phase AC induction motors or direct current motors. Under certain conditions, electric locomotives are the most powerful traction. They are also the cheapest to run and provide less noise and no local air pollution. However, they require high capital investments both for
720-544: A Category 1 historic place (Register no.4418). Following severe storm damage between Wairoa and Gisborne, and doubts about financial viability of the line, the northern portion of the line from Napier – Gisborne was reviewed as part of KiwiRail 's turn-around plan , and was effectively mothballed north of Wairoa in early 2012. Later, on 2 October 2012 KiwiRail announced the mothballing of the entire line from Napier to Gisborne. Trains began running again in 2019. Railway Rail transport (also known as train transport )
800-548: A New Zealand context and is reassessed at least every 6 years. The Chartered Professional Engineers of New Zealand Act (CPEng Act) was enacted on 1 July 2002 and established Engineering New Zealand as the Registration Authority to assess and then register Chartered Professional Engineers (CPEng). International registers Joining an international register means an engineer's competence is recognised to an international standard. It allows greater mobility around
880-521: A consultancy division, and became a separate entity in 1970. The name Institution of Professional Engineers New Zealand was adopted in 1982. In 1989, IPENZ became a founding signatory to the Washington Accord . In 2017, the organisation changed its name to Engineering New Zealand to reflect a significant shift in strategic direction, which focused on delivering greater credibility, recognition, influence and connection to members. In 2018,
SECTION 10
#1732793204846960-550: A diesel locomotive from the company in 1909. The world's first diesel-powered locomotive was operated in the summer of 1912 on the Winterthur–Romanshorn railway in Switzerland, but was not a commercial success. The locomotive weight was 95 tonnes and the power was 883 kW with a maximum speed of 100 km/h (62 mph). Small numbers of prototype diesel locomotives were produced in a number of countries through
1040-478: A double track plateway, erroneously sometimes cited as world's first public railway, in south London. William Jessop had earlier used a form of all-iron edge rail and flanged wheels successfully for an extension to the Charnwood Forest Canal at Nanpantan , Loughborough, Leicestershire in 1789. In 1790, Jessop and his partner Outram began to manufacture edge rails. Jessop became a partner in
1120-437: A large turning radius in its design. While high-speed rail is most often designed for passenger travel, some high-speed systems also offer freight service. Since 1980, rail transport has changed dramatically, but a number of heritage railways continue to operate as part of living history to preserve and maintain old railway lines for services of tourist trains. A train is a connected series of rail vehicles that move along
1200-498: A larger locomotive named Galvani , exhibited at the Royal Scottish Society of Arts Exhibition in 1841. The seven-ton vehicle had two direct-drive reluctance motors , with fixed electromagnets acting on iron bars attached to a wooden cylinder on each axle, and simple commutators . It hauled a load of six tons at four miles per hour (6 kilometers per hour) for a distance of one and a half miles (2.4 kilometres). It
1280-423: A locomotive. This involves one or more powered vehicles being located at the front of the train, providing sufficient tractive force to haul the weight of the full train. This arrangement remains dominant for freight trains and is often used for passenger trains. A push–pull train has the end passenger car equipped with a driver's cab so that the engine driver can remotely control the locomotive. This allows one of
1360-477: A number of trains per hour (tph). Passenger trains can usually be into two types of operation, intercity railway and intracity transit. Whereas intercity railway involve higher speeds, longer routes, and lower frequency (usually scheduled), intracity transit involves lower speeds, shorter routes, and higher frequency (especially during peak hours). Intercity trains are long-haul trains that operate with few stops between cities. Trains typically have amenities such as
1440-676: A piece of circular rail track in Bloomsbury , London, the Catch Me Who Can , but never got beyond the experimental stage with railway locomotives, not least because his engines were too heavy for the cast-iron plateway track then in use. The first commercially successful steam locomotive was Matthew Murray 's rack locomotive Salamanca built for the Middleton Railway in Leeds in 1812. This twin-cylinder locomotive
1520-465: A pivotal role in the development and widespread adoption of the steam locomotive. His designs considerably improved on the work of the earlier pioneers. He built the locomotive Blücher , also a successful flanged -wheel adhesion locomotive. In 1825 he built the locomotive Locomotion for the Stockton and Darlington Railway in the northeast of England, which became the first public steam railway in
1600-439: A revival in recent decades due to road congestion and rising fuel prices, as well as governments investing in rail as a means of reducing CO 2 emissions . Smooth, durable road surfaces have been made for wheeled vehicles since prehistoric times. In some cases, they were narrow and in pairs to support only the wheels. That is, they were wagonways or tracks. Some had grooves or flanges or other mechanical means to keep
1680-739: A single lever to control both engine and generator in a coordinated fashion, and was the prototype for all diesel–electric locomotive control systems. In 1914, world's first functional diesel–electric railcars were produced for the Königlich-Sächsische Staatseisenbahnen ( Royal Saxon State Railways ) by Waggonfabrik Rastatt with electric equipment from Brown, Boveri & Cie and diesel engines from Swiss Sulzer AG . They were classified as DET 1 and DET 2 ( de.wiki ). The first regular used diesel–electric locomotives were switcher (shunter) locomotives . General Electric produced several small switching locomotives in
SECTION 20
#17327932048461760-407: A standard. Following SNCF's successful trials, 50 Hz, now also called industrial frequency was adopted as standard for main-lines across the world. Earliest recorded examples of an internal combustion engine for railway use included a prototype designed by William Dent Priestman . Sir William Thomson examined it in 1888 and described it as a "Priestman oil engine mounted upon a truck which
1840-632: A terminus about one-half mile (800 m) away. A funicular railway was also made at Broseley in Shropshire some time before 1604. This carried coal for James Clifford from his mines down to the River Severn to be loaded onto barges and carried to riverside towns. The Wollaton Wagonway , completed in 1604 by Huntingdon Beaumont , has sometimes erroneously been cited as the earliest British railway. It ran from Strelley to Wollaton near Nottingham . The Middleton Railway in Leeds , which
1920-408: A wheel. This was a large stationary engine , powering cotton mills and a variety of machinery; the state of boiler technology necessitated the use of low-pressure steam acting upon a vacuum in the cylinder, which required a separate condenser and an air pump . Nevertheless, as the construction of boilers improved, Watt investigated the use of high-pressure steam acting directly upon a piston, raising
2000-531: Is a means of transport using wheeled vehicles running in tracks , which usually consist of two parallel steel rails . Rail transport is one of the two primary means of land transport , next to road transport . It is used for about 8% of passenger and freight transport globally, thanks to its energy efficiency and potentially high speed . Rolling stock on rails generally encounters lower frictional resistance than rubber-tyred road vehicles, allowing rail cars to be coupled into longer trains . Power
2080-926: Is a not-for-profit professional body that promotes the integrity and interests of members, the profession, and the industry. It seeks to "bring engineering to life" and has more than 22,000 members. The organisation's strategy is to deliver greater credibility, recognition, influence and connection for members. It promotes engineering as a career and advocates on behalf of members. Engineering New Zealand Te Ao Rangahau sets standards and performs assessments that meet international standards for Chartered Memberships and Registrations for Chartered Professional Engineers. Regional branches run networking events, while technical groups help members stay up-to-date on specific areas of expertise. Members can access continuing professional development and gain experience as volunteers by serving on committees and other bodies. All members of Engineering New Zealand Te Ao Rangahau commit every year to follow
2160-410: Is a single, self-powered car, and may be electrically propelled or powered by a diesel engine . Multiple units have a driver's cab at each end of the unit, and were developed following the ability to build electric motors and other engines small enough to fit under the coach. There are only a few freight multiple units, most of which are high-speed post trains. Steam locomotives are locomotives with
2240-399: Is dominant. Electro-diesel locomotives are built to run as diesel–electric on unelectrified sections and as electric locomotives on electrified sections. Alternative methods of motive power include magnetic levitation , horse-drawn, cable , gravity, pneumatics and gas turbine . A passenger train stops at stations where passengers may embark and disembark. The oversight of the train is
2320-576: Is the tallest viaduct in Australasia . Construction of the railway line from Palmerston North to Gisborne line began in 1872, connecting Palmerston North with Napier in 1891. The northern portion from Napier to Wairoa , and then to Gisborne followed much later, being built between 1912 and 1942. The section of line between Napier and Wairoa passed through difficult country, requiring heavy earthworks, five tunnels, five high steel viaducts to cross deep gorges, and numerous other bridges. Progress
2400-408: Is usually provided by diesel or electrical locomotives . While railway transport is capital-intensive and less flexible than road transport, it can carry heavy loads of passengers and cargo with greater energy efficiency and safety. Precursors of railways driven by human or animal power have existed since antiquity, but modern rail transport began with the invention of the steam locomotive in
2480-556: Is worked on a temporary line of rails to show the adaptation of a petroleum engine for locomotive purposes." In 1894, a 20 hp (15 kW) two axle machine built by Priestman Brothers was used on the Hull Docks . In 1906, Rudolf Diesel , Adolf Klose and the steam and diesel engine manufacturer Gebrüder Sulzer founded Diesel-Sulzer-Klose GmbH to manufacture diesel-powered locomotives. Sulzer had been manufacturing diesel engines since 1898. The Prussian State Railways ordered
Mohaka Viaduct - Misplaced Pages Continue
2560-692: The United Kingdom at the beginning of the 19th century. The first passenger railway, the Stockton and Darlington Railway , opened in 1825. The quick spread of railways throughout Europe and North America, following the 1830 opening of the first intercity connection in England, was a key component of the Industrial Revolution . The adoption of rail transport lowered shipping costs compared to water transport, leading to "national markets" in which prices varied less from city to city. In
2640-615: The United Kingdom , South Korea , Scandinavia, Belgium and the Netherlands. The construction of many of these lines has resulted in the dramatic decline of short-haul flights and automotive traffic between connected cities, such as the London–Paris–Brussels corridor, Madrid–Barcelona, Milan–Rome–Naples, as well as many other major lines. High-speed trains normally operate on standard gauge tracks of continuously welded rail on grade-separated right-of-way that incorporates
2720-414: The overhead lines and the supporting infrastructure, as well as the generating station that is needed to produce electricity. Accordingly, electric traction is used on urban systems, lines with high traffic and for high-speed rail. Diesel locomotives use a diesel engine as the prime mover . The energy transmission may be either diesel–electric , diesel-mechanical or diesel–hydraulic but diesel–electric
2800-458: The puddling process in 1784. In 1783 Cort also patented the rolling process , which was 15 times faster at consolidating and shaping iron than hammering. These processes greatly lowered the cost of producing iron and rails. The next important development in iron production was hot blast developed by James Beaumont Neilson (patented 1828), which considerably reduced the amount of coke (fuel) or charcoal needed to produce pig iron. Wrought iron
2880-418: The rotary phase converter , enabling electric locomotives to use three-phase motors whilst supplied via a single overhead wire, carrying the simple industrial frequency (50 Hz) single phase AC of the high-voltage national networks. An important contribution to the wider adoption of AC traction came from SNCF of France after World War II. The company conducted trials at AC 50 Hz, and established it as
2960-540: The 1880s, railway electrification began with tramways and rapid transit systems. Starting in the 1940s, steam locomotives were replaced by diesel locomotives . The first high-speed railway system was introduced in Japan in 1964, and high-speed rail lines now connect many cities in Europe , East Asia , and the eastern United States . Following some decline due to competition from cars and airplanes, rail transport has had
3040-521: The 1930s (the famous " 44-tonner " switcher was introduced in 1940) Westinghouse Electric and Baldwin collaborated to build switching locomotives starting in 1929. In 1929, the Canadian National Railways became the first North American railway to use diesels in mainline service with two units, 9000 and 9001, from Westinghouse. Although steam and diesel services reaching speeds up to 200 km/h (120 mph) were started before
3120-508: The 1960s in Europe, they were not very successful. The first electrified high-speed rail Tōkaidō Shinkansen was introduced in 1964 between Tokyo and Osaka in Japan. Since then high-speed rail transport, functioning at speeds up to and above 300 km/h (190 mph), has been built in Japan, Spain, France , Germany, Italy, the People's Republic of China, Taiwan (Republic of China),
3200-464: The 40 km Burgdorf–Thun line , Switzerland. Italian railways were the first in the world to introduce electric traction for the entire length of a main line rather than a short section. The 106 km Valtellina line was opened on 4 September 1902, designed by Kandó and a team from the Ganz works. The electrical system was three-phase at 3 kV 15 Hz. In 1918, Kandó invented and developed
3280-530: The Butterley Company in 1790. The first public edgeway (thus also first public railway) built was Lake Lock Rail Road in 1796. Although the primary purpose of the line was to carry coal, it also carried passengers. These two systems of constructing iron railways, the "L" plate-rail and the smooth edge-rail, continued to exist side by side until well into the early 19th century. The flanged wheel and edge-rail eventually proved its superiority and became
Mohaka Viaduct - Misplaced Pages Continue
3360-514: The DC motors of the time and could not be mounted in underfloor bogies : they could only be carried within locomotive bodies. In 1894, Hungarian engineer Kálmán Kandó developed a new type 3-phase asynchronous electric drive motors and generators for electric locomotives. Kandó's early 1894 designs were first applied in a short three-phase AC tramway in Évian-les-Bains (France), which was constructed between 1896 and 1898. In 1896, Oerlikon installed
3440-594: The Institute of Local Government Engineers of New Zealand, was formed in 1912. The following year the New Zealand Society of Civil Engineers was formed. The two bodies merged in 1914 and were known under the later name until 1937. The organisation changed its name to The New Zealand Institution of Engineers in 1937. In 1959 the Association of Consulting Engineers New Zealand (ACENZ) was created as
3520-665: The actual erection taking seven months. All told the viaduct incorporates 1,824.7 tonnes (1,795.9 long tons; 2,011.4 short tons) of steel, held together by about 450,000 rivets . On completion the Mohaka viaduct was the fourth highest in the world at 95 metres (312 ft), and remains the highest viaduct in Australasia . There are twelve plate girder through spans – four spans of 15.2 metres (50 ft), one of 19.8 metres (65 ft), three of 24.7 metres (81 ft), and four of 30.5 metres (100 ft) – supported on six trestle piers . This item of New Zealand's engineering heritage
3600-504: The broad meaning around engineering – to design, create, build, investigate, research and solve. Te Ao means “the universe”. Chartered Professional Engineer (CPEng) A Chartered Professional Engineer is a professional engineer who is registered through Engineering New Zealand, as the Registration Authority. To apply, engineers complete an assessment showing they can deal with complex engineering problems that require specialist knowledge. CPEng requires engineers to demonstrate competence in
3680-514: The completed viaduct was formally opened by the Minister of Public Works Bob Semple on 1 July 1937; it was nick-named "Bob Semple's Meccano set". It was built without accidents and ahead of schedule. When catastrophic floods in April 1938 washed away part of the low-level road bridge the viaduct was pressed into temporary service for road traffic, before regular trains were using it. The viaduct
3760-430: The duty of a guard/train manager/conductor . Passenger trains are part of public transport and often make up the stem of the service, with buses feeding to stations. Passenger trains provide long-distance intercity travel, daily commuter trips, or local urban transit services, operating with a diversity of vehicles, operating speeds, right-of-way requirements, and service frequency. Service frequencies are often expressed as
3840-402: The end of the 19th century, because they were cleaner compared to steam-driven trams which caused smoke in city streets. In 1784 James Watt , a Scottish inventor and mechanical engineer, patented a design for a steam locomotive . Watt had improved the steam engine of Thomas Newcomen , hitherto used to pump water out of mines, and developed a reciprocating engine in 1769 capable of powering
3920-471: The end of the 19th century, improving the quality of steel and further reducing costs. Thus steel completely replaced the use of iron in rails, becoming standard for all railways. The first passenger horsecar or tram , Swansea and Mumbles Railway , was opened between Swansea and Mumbles in Wales in 1807. Horses remained the preferable mode for tram transport even after the arrival of steam engines until
4000-527: The engine by one power stroke. The transmission system employed a large flywheel to even out the action of the piston rod. On 21 February 1804, the world's first steam-powered railway journey took place when Trevithick's unnamed steam locomotive hauled a train along the tramway of the Penydarren ironworks, near Merthyr Tydfil in South Wales . Trevithick later demonstrated a locomotive operating upon
4080-475: The era of great expansion of railways that began in the late 1860s. Steel rails lasted several times longer than iron. Steel rails made heavier locomotives possible, allowing for longer trains and improving the productivity of railroads. The Bessemer process introduced nitrogen into the steel, which caused the steel to become brittle with age. The open hearth furnace began to replace the Bessemer process near
SECTION 50
#17327932048464160-522: The first commercial example of the system on the Lugano Tramway . Each 30-tonne locomotive had two 110 kW (150 hp) motors run by three-phase 750 V 40 Hz fed from double overhead lines. Three-phase motors run at a constant speed and provide regenerative braking , and are well suited to steeply graded routes, and the first main-line three-phase locomotives were supplied by Brown (by then in partnership with Walter Boveri ) in 1899 on
4240-496: The highest possible radius. All these features are dramatically different from freight operations, thus justifying exclusive high-speed rail lines if it is economically feasible. Institution of Professional Engineers New Zealand Engineering New Zealand Te Ao Rangahau ( ENZ ; previously the New Zealand Institution of Engineers – NZIE and then Institution of Professional Engineers New Zealand – IPENZ )
4320-1230: The limit being regarded at 200 to 350 kilometres per hour (120 to 220 mph). High-speed trains are used mostly for long-haul service and most systems are in Western Europe and East Asia. Magnetic levitation trains such as the Shanghai maglev train use under-riding magnets which attract themselves upward towards the underside of a guideway and this line has achieved somewhat higher peak speeds in day-to-day operation than conventional high-speed railways, although only over short distances. Due to their heightened speeds, route alignments for high-speed rail tend to have broader curves than conventional railways, but may have steeper grades that are more easily climbed by trains with large kinetic energy. High kinetic energy translates to higher horsepower-to-ton ratios (e.g. 20 horsepower per short ton or 16 kilowatts per tonne); this allows trains to accelerate and maintain higher speeds and negotiate steep grades as momentum builds up and recovered in downgrades (reducing cut and fill and tunnelling requirements). Since lateral forces act on curves, curvatures are designed with
4400-582: The line and the associated works. Combined with ongoing financial difficulties, this caused the eventual abandonment of work all along the line, although the Mohaka viaduct foundations were finished before work stopped. The works lay idle until restarted in 1936, after a change in Government and some degree of recovery from the Depression. Preparatory work on completing the viaduct started in June 1936, and
4480-429: The locomotive-hauled train's drawbacks to be removed, since the locomotive need not be moved to the front of the train each time the train changes direction. A railroad car is a vehicle used for the haulage of either passengers or freight. A multiple unit has powered wheels throughout the whole train. These are used for rapid transit and tram systems, as well as many both short- and long-haul passenger trains. A railcar
4560-569: The main portion of the B&;O to the new line to New York through a series of tunnels around the edges of Baltimore's downtown. Electricity quickly became the power supply of choice for subways, abetted by the Sprague's invention of multiple-unit train control in 1897. By the early 1900s most street railways were electrified. The London Underground , the world's oldest underground railway, opened in 1863, and it began operating electric services using
4640-433: The mid-1920s. The Soviet Union operated three experimental units of different designs since late 1925, though only one of them (the E el-2 ) proved technically viable. A significant breakthrough occurred in 1914, when Hermann Lemp , a General Electric electrical engineer, developed and patented a reliable direct current electrical control system (subsequent improvements were also patented by Lemp). Lemp's design used
4720-412: The noise they made on the tracks. There are many references to their use in central Europe in the 16th century. Such a transport system was later used by German miners at Caldbeck , Cumbria , England, perhaps from the 1560s. A wagonway was built at Prescot , near Liverpool , sometime around 1600, possibly as early as 1594. Owned by Philip Layton, the line carried coal from a pit near Prescot Hall to
4800-412: The organisation asked kaumātua and respected linguist Sir Tamati Reedy, of Ngāti Porou descent, to consider how Engineering New Zealand could be best represented in te reo Māori. Sir Tamati took a conceptual approach, seeking a name that was simple and memorable. After careful consideration, he decided on Te Ao Rangahau. He used a wide interpretation of engineering and chose “rangahau” because it encompasses
4880-724: The organisation's Code of Ethical Conduct, and to carrying out continuing professional development. Engineering New Zealand Te Ao Rangahau is governed by an elected board , chaired by the president. This board sets strategy and employs the chief executive, who manages operational activity in line with this strategy. The Engineering New Zealand Te Ao Rangahau office is based in Wellington . Members can belong to regional branches and also be part of technical groups that focus on specific expertise. These groups are chaired by volunteers. The first professional engineering body in New Zealand,
SECTION 60
#17327932048464960-525: The possibility of a smaller engine that might be used to power a vehicle. Following his patent, Watt's employee William Murdoch produced a working model of a self-propelled steam carriage in that year. The first full-scale working railway steam locomotive was built in the United Kingdom in 1804 by Richard Trevithick , a British engineer born in Cornwall . This used high-pressure steam to drive
5040-619: The river bed, enabled by the use of pressurised caissons . The Government of the day faced major financial problems following the 1929 stock market crash in the US, and the onset of what would become the Great Depression of the 1930s. To cut costs work was suspended on most of the line, although foundation work continued at the Mohaka viaduct. Then on 3 February 1931 the Hawke’s Bay earthquake caused an enormous amount of damage to both
5120-441: The standard for railways. Cast iron used in rails proved unsatisfactory because it was brittle and broke under heavy loads. The wrought iron invented by John Birkinshaw in 1820 replaced cast iron. Wrought iron, usually simply referred to as "iron", was a ductile material that could undergo considerable deformation before breaking, making it more suitable for iron rails. But iron was expensive to produce until Henry Cort patented
5200-475: The time, was Liverpool and Manchester Railway , built in 1830. Steam power continued to be the dominant power system in railways around the world for more than a century. The first known electric locomotive was built in 1837 by chemist Robert Davidson of Aberdeen in Scotland, and it was powered by galvanic cells (batteries). Thus it was also the earliest battery-electric locomotive. Davidson later built
5280-543: The track. Propulsion for the train is provided by a separate locomotive or from individual motors in self-propelled multiple units. Most trains carry a revenue load, although non-revenue cars exist for the railway's own use, such as for maintenance-of-way purposes. The engine driver (engineer in North America) controls the locomotive or other power cars, although people movers and some rapid transits are under automatic control. Traditionally, trains are pulled using
5360-471: The transport of ore tubs to and from mines and soon became popular in Europe. Such an operation was illustrated in Germany in 1556 by Georgius Agricola in his work De re metallica . This line used "Hund" carts with unflanged wheels running on wooden planks and a vertical pin on the truck fitting into the gap between the planks to keep it going the right way. The miners called the wagons Hunde ("dogs") from
5440-629: The wheels on track. For example, evidence indicates that a 6 to 8.5 km long Diolkos paved trackway transported boats across the Isthmus of Corinth in Greece from around 600 BC. The Diolkos was in use for over 650 years, until at least the 1st century AD. Paved trackways were also later built in Roman Egypt . In 1515, Cardinal Matthäus Lang wrote a description of the Reisszug ,
5520-622: The world in 1825, although it used both horse power and steam power on different runs. In 1829, he built the locomotive Rocket , which entered in and won the Rainhill Trials . This success led to Stephenson establishing his company as the pre-eminent builder of steam locomotives for railways in Great Britain and Ireland, the United States, and much of Europe. The first public railway which used only steam locomotives, all
5600-512: Was a soft material that contained slag or dross . The softness and dross tended to make iron rails distort and delaminate and they lasted less than 10 years. Sometimes they lasted as little as one year under high traffic. All these developments in the production of iron eventually led to the replacement of composite wood/iron rails with superior all-iron rails. The introduction of the Bessemer process , enabling steel to be made inexpensively, led to
5680-602: Was accomplished by the distribution of weight between a number of wheels. Puffing Billy is now on display in the Science Museum in London, and is the oldest locomotive in existence. In 1814, George Stephenson , inspired by the early locomotives of Trevithick, Murray and Hedley, persuaded the manager of the Killingworth colliery where he worked to allow him to build a steam-powered machine. Stephenson played
5760-514: Was built by Siemens. The tram ran on 180 volts DC, which was supplied by running rails. In 1891 the track was equipped with an overhead wire and the line was extended to Berlin-Lichterfelde West station . The Volk's Electric Railway opened in 1883 in Brighton , England. The railway is still operational, thus making it the oldest operational electric railway in the world. Also in 1883, Mödling and Hinterbrühl Tram opened near Vienna in Austria. It
5840-706: Was built in 1758, later became the world's oldest operational railway (other than funiculars), albeit now in an upgraded form. In 1764, the first railway in the Americas was built in Lewiston, New York . In the late 1760s, the Coalbrookdale Company began to fix plates of cast iron to the upper surface of the wooden rails. This allowed a variation of gauge to be used. At first only balloon loops could be used for turning, but later, movable points were taken into use that allowed for switching. A system
5920-540: Was designed by John Lelliot Cull and William Langston Newnham, both of whom worked in the PWD head office. It is built of mild steel components, which were prefabricated at the Public Works Department Workshops at Mount Maunganui , near Tauranga , shipped to Waikokopu, and railed to the construction site. The steelwork was erected using a cable-way across the gorge to place the material, with
6000-548: Was introduced in which unflanged wheels ran on L-shaped metal plates, which came to be known as plateways . John Curr , a Sheffield colliery manager, invented this flanged rail in 1787, though the exact date of this is disputed. The plate rail was taken up by Benjamin Outram for wagonways serving his canals, manufacturing them at his Butterley ironworks . In 1803, William Jessop opened the Surrey Iron Railway ,
6080-489: Was light enough to not break the edge-rails track and solved the problem of adhesion by a cog-wheel using teeth cast on the side of one of the rails. Thus it was also the first rack railway . This was followed in 1813 by the locomotive Puffing Billy built by Christopher Blackett and William Hedley for the Wylam Colliery Railway, the first successful locomotive running by adhesion only. This
6160-551: Was recognised as part of the Institution of Professional Engineers New Zealand (IPENZ) "Engineering to 1990" project which the institution organised to help celebrate New Zealand's 150th anniversary in 1990 . A plaque was unveiled to mark the significance of this railway viaduct as part of the development of the nation. The viaduct has been registered by the New Zealand Historic Places Trust as
6240-534: Was slow, with portions of the line being progressively opened as sections were completed and handed over to the Railways Department. After completion of the line from Wairoa to the viaduct site in late 1930, the pre-fabricated steel work was railed from the small port of Waikokopu , about 40 km east of Wairoa. A start was made with the driving of test piles, and the digging of 18.3 metres (60 ft) to 21.3 metres (70 ft) deep foundations in
6320-762: Was tested on the Edinburgh and Glasgow Railway in September of the following year, but the limited power from batteries prevented its general use. It was destroyed by railway workers, who saw it as a threat to their job security. By the middle of the nineteenth century most european countries had military uses for railways. Werner von Siemens demonstrated an electric railway in 1879 in Berlin. The world's first electric tram line, Gross-Lichterfelde Tramway , opened in Lichterfelde near Berlin , Germany, in 1881. It
6400-636: Was the first tram line in the world in regular service powered from an overhead line. Five years later, in the U.S. electric trolleys were pioneered in 1888 on the Richmond Union Passenger Railway , using equipment designed by Frank J. Sprague . The first use of electrification on a main line was on a four-mile section of the Baltimore Belt Line of the Baltimore and Ohio Railroad (B&O) in 1895 connecting
#845154