Misplaced Pages

#717282

144-598: The Grand Familia/Savanna were originally intended to replace the smaller Mazda Familia to better compete with the Toyota Corolla , Nissan Sunny , and Mitsubishi Colt . With the onset of the 1970s energy crisis however, the Familia sold better due to its fuel economy. Since Mazda had already developed the Grand Familia/Savanna, it was sold globally as a somewhat larger, more upscale alternative to

288-642: A 10A rotary engine like the Mazda Familia Rotary Coupe/Mazda R100 , but US cars shared the larger 12A engine from the RX-2. Performance-wise the 10A RX-3 was not able to match the RX-2 with 12A . With a weight-to-power ratio of 10.9 kg per kW compared to the RX-2's 9.9 kg per kW, the RX-3 was slower. The 12A RX-3 wasn't able to match the RX-2 with 12A either, despite its lighter weight. The smaller engined version has

432-672: A "panel van" by Mazda) was added in early or mid 1965. A new Familia 1000 coupé arrived in November 1965, with a 985 cc SOHC "PC" engine, and was joined by the larger Mazda Luce in 1966. Around the same time, the 800 engine was upgraded, adding three horsepower. As a number of new 1-liter vehicles were introduced by Mazda's competitors, another 987 cc OHV engine (PB) appeared in January 1967, powering new 1000 sedan and van versions. The 1-liter sedans and vans are recognizable by their broader, rounded-off rectangular headlights. Production of

576-529: A combination of both the fuel crisis and the rotary engine's early reputation for poor reliability. While the Series I Savanna and RX-3 were powered by the 10A in Japan, Australia, and Europe, North American markets got the larger 12A taken from the RX-2 coupled to either a four speed manual or automatic transmission. Along with this engine change came the chassis prefix S124A. The 1972 Savanna / RX-3 Sports Wagon

720-475: A long-wheelbase version, and still featured an 85 PS (63 kW) (SAE gross) version of the 1.3-litre TC engine, unaffected by the tighter Japanese emissions standards for passenger cars. The "1200" was offered in the United States in 1971 and again for the 1973 model year. US-market models had round sealed-beam headlamps mounted in pill-shaped bezels fitting the original openings. The 1971 version

864-412: A long-wheelbase version, and still featured an 85 PS (63 kW) (SAE gross) version of the 1.3-litre TC engine, unaffected by the tighter Japanese emissions standards for passenger cars. The "1200" was offered in the United States in 1971 and again for the 1973 model year. US-market models had round sealed-beam headlamps mounted in pill-shaped bezels fitting the original openings. The 1971 version

1008-932: A quartet of Porsche 911s . The Familia also placed fifth at the Marathon de la Route at Nürburgring in 1969, the same race that the Cosmo had bowed at the previous year. Finally, Mazda took the Familia home for the Suzuka All-Japan Grand Cup, where it won easily. For 1970, the Familia placed eighth at the RAC Tourist Trophy in June, followed by a fourth place at the West German Touring Car race in July. At Spa, four Familias were present, battling with BMW Alpinas , and Alfa Romeos for

1152-499: A quartet of Porsche 911s . The Familia also placed fifth at the Marathon de la Route at Nürburgring in 1969, the same race that the Cosmo had bowed at the previous year. Finally, Mazda took the Familia home for the Suzuka All-Japan Grand Cup, where it won easily. For 1970, the Familia placed eighth at the RAC Tourist Trophy in June, followed by a fourth place at the West German Touring Car race in July. At Spa, four Familias were present, battling with BMW Alpinas , and Alfa Romeos for

1296-456: A result, the Series 2 was slow off the mark but had a better top speed. The loss of torque plus a 44-kilo weight increase slowed the Series II to a 17.8 second quarter mile. Interior changes were minor and included a change from the km/h/mph speedometer to a 200 km/h speedometer (180 km/h for the 808), an exhaust overhead light, a 50 Amp ammeter (up from 30 Amps) plus design changes to

1440-558: A rotary-engined 323 in the South African national rally championship. In Indonesia the third-generation Familia was marketed by Indomobil Group twice, the first time as the 323 hatchback from 1977 to 1980, and the second time around as the low-cost alternative of the popular Toyota Kijang and fellow Indomobil Group product's Suzuki Carry Extra/Futura; low-price "Mazda MR90" (hatchback) between December 1990 to 1993, "Mazda Baby Boomers" (hatchback) between 1993 and 1995, and as

1584-495: A rotary-engined 323 in the South African national rally championship. In Indonesia the third-generation Familia was marketed by Indomobil Group twice, the first time as the 323 hatchback from 1977 to 1980, and the second time around as the low-cost alternative of the popular Toyota Kijang and fellow Indomobil Group product's Suzuki Carry Extra/Futura; low-price "Mazda MR90" (hatchback) between December 1990 to 1993, "Mazda Baby Boomers" (hatchback) between 1993 and 1995, and as

SECTION 10

#1732790074718

1728-416: A time a signature design element for the rotary engined versions of Mazda's cars. Inside, the cars were more sumptuously appointed with plusher seats and chrome plated accents, full sized interior door trim panels, a floor mounted handbrake lever, and a unique cockpit styled dashboard with full instrumentation. Mazda referred to this dashboard as the "T-Dash", and fitted it to top spec piston engined variants of

1872-416: A time a signature design element for the rotary engined versions of Mazda's cars. Inside, the cars were more sumptuously appointed with plusher seats and chrome plated accents, full sized interior door trim panels, a floor mounted handbrake lever, and a unique cockpit styled dashboard with full instrumentation. Mazda referred to this dashboard as the "T-Dash", and fitted it to top spec piston engined variants of

2016-638: A two-door sedan. The "flat deck" design of the sedan versions was reportedly inspired by the Chevrolet Corvair . Private car versions received foglights in the grille as well as more chrome trim. The Familia was sold in other markets as the 800. The Familia was introduced to the Japanese market in time for the 1964 Summer Olympics which began in October. The cars used a 782 cc, " SA " four-stroke aluminum straight-four engine , also known as

2160-484: A young Giorgetto Giugiaro while working at Carrozzeria Bertone , appeared in October 1963. In line with Mazda's policy of only gradually approaching the production of private cars (a luxury in Japan at the time), the first Familia was initially only available as a commercial two-door wagon called the Familia van. The van was joined in April 1964 by a plusher Familia wagon, in October by a four-door sedan, and in November by

2304-712: Is a small family car that was manufactured by Mazda between 1963 and 2003. The Familia line was replaced by the Mazda3 /Axela for 2004. It was marketed as the Familia in Japan, which means "family" in Latin. For export, earlier models were sold with nameplates including: "800", "1000", "1200", and "1300". In North America, the 1200 was replaced by the Mazda GLC , with newer models becoming "323" and "Protegé". In Europe, all Familias sold after 1977 were called "323". The Familia

2448-701: Is better known by its export market names Mazda 808, 818, and RX-3. The Grand Familia was also built by Kia with the 1272 cc engine from October 1975, originally as the Brisa II and later as the K303. A facelifted version of the Familia Presto was announced in September 1973, a month before the 1973 oil crisis . It was basically an updated version of the 1970 Familia Presto, reintroduced with 60 mm wider bodywork and reworked front and rear designs. It

2592-473: Is better known by its export market names Mazda 808, 818, and RX-3. The Grand Familia was also built by Kia with the 1272 cc engine from October 1975, originally as the Brisa II and later as the K303. A facelifted version of the Familia Presto was announced in September 1973, a month before the 1973 oil crisis . It was basically an updated version of the 1970 Familia Presto, reintroduced with 60 mm wider bodywork and reworked front and rear designs. It

2736-609: The Mazda Familia Wagon/Van , a badge-engineered version of the Nissan AD wagon (1994–2017) and Toyota Probox (2018–present). Mazda Familias were manufactured in the Hiroshima Plant and also assembled from " knock-down kits " in various countries including Taiwan, Indonesia, Malaysia, South Africa, Zimbabwe, Colombia, and New Zealand. Some of these plants kept manufacturing the Familia long after it

2880-635: The Ford Laser (and Ford Meteor, for its four-door sedan model in Australia). At its introduction in 1980, it won the first Car of the Year Japan Award. The new Mazda E engine -series, loosely based on the preceding PC/TC/UC series, was developed expressly for the BD and was offered in three different displacements. The smallest 1.1-liter E1 unit was reserved for certain export markets where

3024-405: The Ford Laser (and Ford Meteor, for its four-door sedan model in Australia). At its introduction in 1980, it won the first Car of the Year Japan Award. The new Mazda E engine -series, loosely based on the preceding PC/TC/UC series, was developed expressly for the BD and was offered in three different displacements. The smallest 1.1-liter E1 unit was reserved for certain export markets where

SECTION 20

#1732790074718

3168-450: The Hiroshima Plant and also assembled from " knock-down kits " in various countries including Taiwan, Indonesia, Malaysia, South Africa, Zimbabwe, Colombia, and New Zealand. Some of these plants kept manufacturing the Familia long after it was discontinued at home. Mazda's automotive plans for the early sixties consisted of growing alongside the Japanese economy. To achieve this goal, they began by building an extremely affordable kei car ,

3312-637: The R360 in 1960, planning on introducing gradually larger and pricier cars as the Japanese customers became able to afford them. As a preview, testing the waters, a larger "Mazda 700" prototype was shown at the eighth Tokyo Motor Show in 1961, and formed the basis for the upcoming Mazda Familia. Meanwhile, the four door version of the R360 was introduced as the Mazda Carol , which appeared in 1962, and discontinued in 1964. The first production Familia, styled by

3456-656: The Sohari Plant in Gwangmyeong , South Korea. Production originally commenced in 1973 in the form of the Brisa B-1000 pickup truck, but passenger car production (originally as the "Brisa S-1000") only commenced later. Brisa comes from the Spanish/Portuguese word for "breeze". The Brisa was equipped with a 62 PS (46 kW) 1.0-liter Mazda engine, a bigger 1.3-liter engine was later added to

3600-407: The Sohari Plant in Gwangmyeong , South Korea. Production originally commenced in 1973 in the form of the Brisa B-1000 pickup truck, but passenger car production (originally as the "Brisa S-1000") only commenced later. Brisa comes from the Spanish/Portuguese word for "breeze". The Brisa was equipped with a 62 PS (46 kW) 1.0-liter Mazda engine, a bigger 1.3-liter engine was later added to

3744-601: The Toyota Corolla , and the Nissan Sunny in North America. The Grand Familia/Savanna was intended to replace the smaller Familia. But with the advent of the 1970s energy crisis , the Familia began to experience an increase in sales due to better fuel economy, so the Familia remained in Japan and Europe, and Mazda decided to offer the Grand Familia and Savanna as larger, performance enhanced alternatives. It

3888-415: The Toyota Corolla , and the Nissan Sunny in North America. The Grand Familia/Savanna was intended to replace the smaller Familia. But with the advent of the 1970s energy crisis , the Familia began to experience an increase in sales due to better fuel economy, so the Familia remained in Japan and Europe, and Mazda decided to offer the Grand Familia and Savanna as larger, performance enhanced alternatives. It

4032-625: The "Familia Presto" in the domestic Japanese market), the slightly different OHC "PC" 1-liter engine was also offered. A larger 1169 cc straight-four engined version came along in February 1968, becoming the "Mazda 1200" for export. In this form, the car was first exhibited in Europe at the 1968 Paris Motor Show in the autumn of that year. Power outputs (SAE gross) in Japan of the facelifted, overhead-cam-engined versions were 62 and 75 PS (46 and 55 kW) respectively. The Van (wagon) model

4176-516: The "Familia Presto" in the domestic Japanese market), the slightly different OHC "PC" 1-liter engine was also offered. A larger 1169 cc straight-four engined version came along in February 1968, becoming the "Mazda 1200" for export. In this form, the car was first exhibited in Europe at the 1968 Paris Motor Show in the autumn of that year. Power outputs (SAE gross) in Japan of the facelifted, overhead-cam-engined versions were 62 and 75 PS (46 and 55 kW) respectively. The Van (wagon) model

4320-467: The "Mazda Mizer" in the United States with all three types of bodywork. Engine: 1976–1977 – 1.3 L (1272 cc) TC I4 , twin-barrel, 48 hp (36 kW) and 67 lb⋅ft (91 N⋅m) From October 1975 the Grand Familia was built in South Korea by Kia Motors , with the 1272 cc 72 PS (53 kW) engine and four-door bodywork. Originally it was sold as the Brisa II, alongside

4464-599: The "Mazda Vantrend" (station wagon and special limited order as high roof van or pickup truck) between 1993 and 1997. The Vantrend and its derivatives were also marketed as the Mazda M1400 . The name MR90 stands for "Mobil Rakyat 90" (people's car for the 1990s) as it was intended to become a national car project. This was scuppered by the appearance of the Timor 515 project. The MR90 and its successors did see limited exports to small markets such as Fiji and Sri Lanka. There

Mazda Grand Familia - Misplaced Pages Continue

4608-489: The "Mazda Vantrend" (station wagon and special limited order as high roof van or pickup truck) between 1993 and 1997. The Vantrend and its derivatives were also marketed as the Mazda M1400 . The name MR90 stands for "Mobil Rakyat 90" (people's car for the 1990s) as it was intended to become a national car project. This was scuppered by the appearance of the Timor 515 project. The MR90 and its successors did see limited exports to small markets such as Fiji and Sri Lanka. There

4752-672: The "white engine". There was also a pickup version available from November 1964, while a box truck (called a "panel van" by Mazda) was added in early or mid 1965. A new Familia 1000 coupé arrived in November 1965, with a 985 cc SOHC "PC" engine, and was joined by the larger Mazda Luce in 1966. Around the same time, the 800 engine was upgraded, adding three horsepower. As a number of new 1-liter vehicles were introduced by Mazda's competitors, another 987 cc OHV engine (PB) appeared in January 1967, powering new 1000 sedan and van versions. The 1-liter sedans and vans are recognizable by their broader, rounded-off rectangular headlights. Production of

4896-472: The 1.6-litre engine with 75 PS (55 kW; 74 hp). Because of Peugeot's trademark issues with any model numbers with a central zero, European distributors sold the car as the Mazda 818 . For 1976, the new 1.3-liter engine became standard fitment, offering 60 PS (44 kW; 59 hp). The 1.6 remained available but in several markets it was discontinued in later years, as the now somewhat dated 818

5040-631: The 1146 cc (2x573 cc) 12A . While the larger S124A eventually replaced the S102A in most markets, the S102A remained on sale alongside the S124A in Japan through to early 1974 with all the Series II updates. The Series I S102A remained on sale in some markets even longer, being available in the United Kingdom until the 1975 model year at least, though this was most likely as a result of stocks of earlier production vehicles remaining unsold due to

5184-570: The 1200 was replaced by the Mazda GLC , with newer models becoming "323" and "Protegé". In Europe, all Familias sold after 1977 were called "323". The Familia was also rebranded as the Ford Laser and Ford Meteor in Asia, Oceania, Southern Africa, some Latin American countries and, from 1991, as the Ford Escort and Mercury Tracer in North America. In addition, the Familia name was used as

5328-402: The 1400) at the end of June 1978. When the next generation front-wheel-drive Familia/323/GLC models were released in 1980, the wagon and van models continued unchanged, due to Mazda not developing wagon models for the newer range. A facelift however was given to the wagons in 1981, which gave the models the front clip (albeit with different bumpers) of the front-wheel-drive models. Production of

5472-402: The 1400) at the end of June 1978. When the next generation front-wheel-drive Familia/323/GLC models were released in 1980, the wagon and van models continued unchanged, due to Mazda not developing wagon models for the newer range. A facelift however was given to the wagons in 1981, which gave the models the front clip (albeit with different bumpers) of the front-wheel-drive models. Production of

5616-578: The 1975 Bathurst 1000 caused more than a worried look after placing fifth outright and 1st in its class for the second consecutive year after its initial class win in 1974. The RX-3 dominated the class C in 1975 holding 4 of the top 5 positions. In North America, the RX-3 had much success in SCCA and IMSA competition. Many RX-3s are still competing and one in particular is the SCCA Super Production car driven by Irish driver John Cummins. The RX-3

5760-409: The 1986 model year. For the 1979 model year, the original 52 hp (39 kW) 1272 cc four was replaced with a 1415 cc engine producing 65 hp (48 kW). In addition to three- and five-door hatchbacks, as well as the wagon, there was also a GLC Sport version which offered a five-speed rather than the four-speed manual or the three-speed automatic installed in other versions. After

5904-409: The 1986 model year. For the 1979 model year, the original 52 hp (39 kW) 1272 cc four was replaced with a 1415 cc engine producing 65 hp (48 kW). In addition to three- and five-door hatchbacks, as well as the wagon, there was also a GLC Sport version which offered a five-speed rather than the four-speed manual or the three-speed automatic installed in other versions. After

Mazda Grand Familia - Misplaced Pages Continue

6048-440: The 323/Familia underwent a facelift, replacing the previous round headlights with rectangular units which were designed as a single unit along with the grille. The new style was in line with that of the recently released Mazda Capella/626 (CB) . Other minor differences occurred along with the facelift. The range was replaced in 1980, however, the station wagon models continued in production until 1986. The FA4-series Familia/323

6192-440: The 323/Familia underwent a facelift, replacing the previous round headlights with rectangular units which were designed as a single unit along with the grille. The new style was in line with that of the recently released Mazda Capella/626 (CB) . Other minor differences occurred along with the facelift. The range was replaced in 1980, however, the station wagon models continued in production until 1986. The FA4-series Familia/323

6336-556: The BPB55, BTA55/65, or FA2T55/65/66 model codes respectively when fitted with the OHV 1.0 or 1.2, or the OHC 1.3. FA2T55 was a short bed with 500 kg (1,100 lb) max load, 65 was a long bed with the same capacity, while the 66 upped that to 600 kg (1,300 lb). All three models were available as either Standard or Deluxe. The 1000 Van (Japanese terminology for the station wagon, which

6480-406: The BPB55, BTA55/65, or FA2T55/65/66 model codes respectively when fitted with the OHV 1.0 or 1.2, or the OHC 1.3. FA2T55 was a short bed with 500 kg (1,100 lb) max load, 65 was a long bed with the same capacity, while the 66 upped that to 600 kg (1,300 lb). All three models were available as either Standard or Deluxe. The 1000 Van (Japanese terminology for the station wagon, which

6624-406: The Familia on the Japanese market as well as the rotary models. In Japan, the installation of a rotary engine gave Japanese buyers a financial advantage when it came time to pay the annual road tax in that they bought a car that was more powerful than a traditional inline engine, but without having the penalty for having an engine in the higher 1.0-litre tax bracket. This was the only generation of

6768-406: The Familia on the Japanese market as well as the rotary models. In Japan, the installation of a rotary engine gave Japanese buyers a financial advantage when it came time to pay the annual road tax in that they bought a car that was more powerful than a traditional inline engine, but without having the penalty for having an engine in the higher 1.0-litre tax bracket. This was the only generation of

6912-528: The Familia that had the rotary engine offered. When Mazda updated the rotary engine to single distributor design in late 1973 with a raft of improvements to improve reliability and fuel economy, the smaller 10A engine was discontinued. Upgrading the Familia Rotary to the 12A engine would have cost the car its tax advantage in Japan, and the decision to discontinue it was made, despite the Familia body continuing production for some years to follow. The R100

7056-464: The Familia that had the rotary engine offered. When Mazda updated the rotary engine to single distributor design in late 1973 with a raft of improvements to improve reliability and fuel economy, the smaller 10A engine was discontinued. Upgrading the Familia Rotary to the 12A engine would have cost the car its tax advantage in Japan, and the decision to discontinue it was made, despite the Familia body continuing production for some years to follow. The R100

7200-506: The Familia/1000/1300 and in North America it was Mazda's smallest offering. The Grand Familia was available in coupé, sedan, and station wagon forms. Engines were inline four-cylinder units and included a 1,272 cc and a 1,490 cc option, called the "Grand Familia S" in Japan. The 1.5 was replaced by a larger 1.6-liter four-cylinder in November 1973, an engine which had by then already been used in some export markets (like

7344-540: The Japanese annual road tax which kept the obligation affordable to most buyers, while having more power than the traditional inline engines. The Savanna/RX-3 was the next Mazda racing entry, following up the success of the Cosmo and Familia Rotary . The Savanna debuted with a win at the September, 1971 "Fuji 500" race. The cars battled with Nissan 's Skyline on the Japanese Grand Prix in 1972, winning

SECTION 50

#1732790074718

7488-573: The Mazda Grand Familia. It was available from September 1971 through 1978 in Super Deluxe coupé, Deluxe sedan, and station wagon forms. The Super Deluxe coupé was heavier (884 kg vs 864 kg) and carried an optional body stripe, clock, rear defogger and the centre console/high armrest and collapsible steering column. Sold from 1972 through 1978 in the United States, the RX-3 version was extremely successful. It originally used

7632-491: The RX-2). In 1972 all rotary engines had their die-cast rotor housing coated with a new process: The new Transplant Coating Process (TCP) featured sprayed-on steel which is then coated with chrome, giving greatly increased engine life. In mid 1973, Mazda released a visually updated Savanna in Japan, though drivetrain choices remained the same with the S102A 10A and the S124A 12A both available in twin distributor form. Externally

7776-549: The RX-3 Sports Wagon, was sold for just one year in the U.S., from 1972 to 1973, when it was replaced by the Luce/RX-4 wagon . However the "Savanna Sports Wagon" remained in production in Japan right through until the end of Savanna production in 1977. Initially in all markets except North America all cars were designated S102A and came with the 982 cc (2x491 cc) 10A . S124A cars introduced later on came with

7920-478: The Series 2) it was known as the "Familia Presto Rotary" in Japan as the Presto nameplate was added into the entire Familia range. Power was rated at just 100 PS (74 kW) due to a small carburetor (thus the "R100" name). The rotary engined R100 has a unique front end design, with a more prominent pointed hood, grille, and bumper. The rear also gained its own design with twin round tail lights, which became for

8064-425: The Series 2) it was known as the "Familia Presto Rotary" in Japan as the Presto nameplate was added into the entire Familia range. Power was rated at just 100 PS (74 kW) due to a small carburetor (thus the "R100" name). The rotary engined R100 has a unique front end design, with a more prominent pointed hood, grille, and bumper. The rear also gained its own design with twin round tail lights, which became for

8208-576: The United States) for over two years. In the Japanese market, myriad equipment levels were available, ranging from the very basic 1300 Standard to the most luxurious 1500 GL  II ("GF  II " for the coupé). Originally, only a four-speed manual transmission was available. Later desmogged versions were sold as the "Grand Familia AP", with AP standing for "Anti Pollution". Power outputs for these models were considerably lower. Engines (Japan): When first introduced, European buyers were offered

8352-473: The commercial versions based on the 1970 Familia could finally be retired. Three Mazda engines were available, the 985 cc PC , 1,272 cc TC , and the 1415 cc UC (introduced in March 1978). The 1.0-liter unit was only made for export markets. The new Familia shared many parts with the older Mazda Grand Familia. This was the first appearance of the 323 name, for export markets only. The Familia AP

8496-421: The commercial versions based on the 1970 Familia could finally be retired. Three Mazda engines were available, the 985 cc PC , 1,272 cc TC , and the 1415 cc UC (introduced in March 1978). The 1.0-liter unit was only made for export markets. The new Familia shared many parts with the older Mazda Grand Familia. This was the first appearance of the 323 name, for export markets only. The Familia AP

8640-637: The economy sector with the Mizer in 1976, a rebadged 808/818. Engine (US): The pickup models were built until 1991 for markets such as South Africa, Zimbabwe, and the Philippines. In South Africa, the little bakkie was sold as the "Mazda F-1000" or "F-1300". In Thailand, a version of the pickup was produced in small numbers until the late 1990s as the Familia Super Cab and Maxi Cab. Engines (export power outputs, DIN): The pickup received

8784-458: The economy sector with the Mizer in 1976, a rebadged 808/818. Engine (US): The pickup models were built until 1991 for markets such as South Africa, Zimbabwe, and the Philippines. In South Africa, the little bakkie was sold as the "Mazda F-1000" or "F-1300". In Thailand, a version of the pickup was produced in small numbers until the late 1990s as the Familia Super Cab and Maxi Cab. Engines (export power outputs, DIN): The pickup received

SECTION 60

#1732790074718

8928-427: The entire front end sheet metal was revamped and a different set of taillights with twin brake lights were included (commonly known as Savanna tail lights in Australia). In the months that followed, the range was updated to the single distributor 12A and the 10A motor was discontinued in early 1974. The Series II RX-3 came to Australia in March 1974 powered by the new 12A single distributor ( 12B ). The starter motor

9072-578: The executive director of Indomobil Group) built around 50 units replica of Porsche 911 (964) based on MR90 hatchbacks. While retaining the original 1.4-liter engine, 5-speed manual gearbox, suspension and dashboard (later models has 964 dashboard replica), the body was made from fiberglass by using the 964 production tools from VW Group . At that time Indomobil had a trial by assembling two Porsche 964 and planned to build Porsche and Audi in Indonesia to compete with BMW and Mercedes-Benz . The plan

9216-521: The executive director of Indomobil Group) built around 50 units replica of Porsche 911 (964) based on MR90 hatchbacks. While retaining the original 1.4-liter engine, 5-speed manual gearbox, suspension and dashboard (later models has 964 dashboard replica), the body was made from fiberglass by using the 964 production tools from VW Group . At that time Indomobil had a trial by assembling two Porsche 964 and planned to build Porsche and Audi in Indonesia to compete with BMW and Mercedes-Benz . The plan

9360-412: The grille as well as more chrome trim. The Familia was sold in other markets as the 800. The Familia was introduced to the Japanese market in time for the 1964 Summer Olympics which began in October. The cars used a 782 cc, " SA " four-stroke aluminum straight-four engine , also known as the "white engine". There was also a pickup version available from November 1964, while a box truck (called

9504-437: The grille, and a completely redesigned dashboard and console exclusive to the model. It also had unique leather-like vinyl upholstery with GT embossed on the headrests. It came also with the chassis code S124A. The 10A engine output was 105 PS (77 kW) and 100 lb·ft (135 Nm). 0–60 mph (0–97 km/h) acceleration time was 10.8 seconds, and the car ran a 17.6 second quarter-mile (400 m) (versus 16.3 for

9648-538: The internal model code S102A , while the larger one is known as the S124A . In Japan, the installation of a rotary engine gave Japanese buyers a financial advantage when it came time to pay the annual road tax in that they bought a car that was more powerful than a traditional inline engine, but without having the penalty for having an engine in the higher 1.5 litre tax bracket. The first Mazda Savanna went on sale in September 1971 and remained in production until 1977. It

9792-410: The introduction of the front-wheel-drive GLC the carry-over station wagon's engine was replaced with the new E5 model of 1490 cc, although claimed power dropped somewhat, to 63 hp (47 kW). In South Africa, the five-door-only 323 proved an immediate success. The 1.3 was gradually replaced by the larger 1.4 from July 1978, while a Special and a CS model were added at the low and high ends of

9936-410: The introduction of the front-wheel-drive GLC the carry-over station wagon's engine was replaced with the new E5 model of 1490 cc, although claimed power dropped somewhat, to 63 hp (47 kW). In South Africa, the five-door-only 323 proved an immediate success. The 1.3 was gradually replaced by the larger 1.4 from July 1978, while a Special and a CS model were added at the low and high ends of

10080-683: The larger Grand Familia -based Mazda Savannah. The piston-engined 1000/1300 and rotary-engined R100 coupés were also replaced by 808/818/RX-3 coupé for export market. This generation was not available in North America and replaced by the bigger 808/Mizer/RX-3. Developed to meet new stricter emissions standards in the domestic market, the Presto featured the 1272 cc TC engine or the by now familiar, pushrod 1.0-litre PB unit. Power outputs in Japan (JIS gross) are 62 PS (46 kW; 61 hp) and 87 PS (64 kW; 86 hp) respectively, 50 PS (37 kW; 49 hp) and 66 PS (49 kW; 65 hp) (DIN) for export markets. Production of

10224-683: The larger Grand Familia -based Mazda Savannah. The piston-engined 1000/1300 and rotary-engined R100 coupés were also replaced by 808/818/RX-3 coupé for export market. This generation was not available in North America and replaced by the bigger 808/Mizer/RX-3. Developed to meet new stricter emissions standards in the domestic market, the Presto featured the 1272 cc TC engine or the by now familiar, pushrod 1.0-litre PB unit. Power outputs in Japan (JIS gross) are 62 PS (46 kW; 61 hp) and 87 PS (64 kW; 86 hp) respectively, 50 PS (37 kW; 49 hp) and 66 PS (49 kW; 65 hp) (DIN) for export markets. Production of

10368-480: The line up. Production came to an end after the new military dictator Chun Doo-hwan enforced industry consolidation, meaning Kia had to give up passenger cars and focus entirely on light trucks. The original version of the Brisa received a slightly different front end from the original Familia, featuring twin headlights. Later, single headlights were used. In total, 31,017 Brisa passenger cars were built. Including

10512-428: The line up. Production came to an end after the new military dictator Chun Doo-hwan enforced industry consolidation, meaning Kia had to give up passenger cars and focus entirely on light trucks. The original version of the Brisa received a slightly different front end from the original Familia, featuring twin headlights. Later, single headlights were used. In total, 31,017 Brisa passenger cars were built. Including

10656-510: The lineup respectively, complementing the existing De Luxe models. Well-equipped versions of the 1978 facelift model were sold as the "323 GLC" in South Africa. A 1600-cc model was also available in South Africa – however this model did not have a Mazda engine, unlike the rest of the range. To satisfy that country's local content regulations, a locally built Mitsubishi Saturn 1.6-liter unit was used. This produces 77 PS (57 kW) and

10800-449: The lineup respectively, complementing the existing De Luxe models. Well-equipped versions of the 1978 facelift model were sold as the "323 GLC" in South Africa. A 1600-cc model was also available in South Africa – however this model did not have a Mazda engine, unlike the rest of the range. To satisfy that country's local content regulations, a locally built Mitsubishi Saturn 1.6-liter unit was used. This produces 77 PS (57 kW) and

10944-453: The model some of its charm. In the U.S. the 1976 rear lights were hexagons. The 1977 rear lights were rectangular. An optional RX-3 'special appearance package' called the RX-3sp was sold in 1977 to advertise the new 75,000 mile engine guarantee for rotary engines. The 1978 RX-3's were only sold as 'off road' (race) versions. The Savanna and RX-3 production was phased out in 1978 to make room for

11088-477: The new Mazda RX-7 . Of all the pre-RX-7 rotary vehicles Mazda built (930,000 in total), the RX-3 was by far the most popular. Of all the RX-3's built, the coupe exceeded 50 percent of total sale – all facts which influenced the design profile of the RX-7. The rotary engine had financial advantages to Japanese consumers in that the engine displacement remained below 1.5 litres, a significant determination when paying

11232-476: The overall length increased, up to 3,970 mm (156 in) for the MR90 hatchback. Only the 70 PS (51 kW) UC 1.4-liter engine was offered, in combination with a five-speed transmission. The project was suggested to and given the green light by Mazda's Senior Managing Director Keiji Asano while he was on a trip to Indonesia in 1986. Sold alongside the seventh generation 323 , an MR90 cost less than half

11376-425: The overall length increased, up to 3,970 mm (156 in) for the MR90 hatchback. Only the 70 PS (51 kW) UC 1.4-liter engine was offered, in combination with a five-speed transmission. The project was suggested to and given the green light by Mazda's Senior Managing Director Keiji Asano while he was on a trip to Indonesia in 1986. Sold alongside the seventh generation 323 , an MR90 cost less than half

11520-471: The pickups increases the totals to 75,987, of which a total of 1,526 were exported. Exports, Kia's first, began with a shipment of 31 Brisa B-1000 pickups to Qatar in 1975. The Brisa (along with the pickup model, typically called "Master" in export) was also exported to Colombia and Greece. In September 1971, Mazda introduced the "Mazda Grand Familia" and the Mazda Savanna to better compete with

11664-409: The pickups increases the totals to 75,987, of which a total of 1,526 were exported. Exports, Kia's first, began with a shipment of 31 Brisa B-1000 pickups to Qatar in 1975. The Brisa (along with the pickup model, typically called "Master" in export) was also exported to Colombia and Greece. In September 1971, Mazda introduced the "Mazda Grand Familia" and the Mazda Savanna to better compete with

11808-491: The podium. This time, three of the Mazdas retired, with the fourth claiming the fifth position. Mazda also turned its attention to Le Mans in 1970 with rotary-powered prototypes. The company finally won that race 21 years later with the 787B . From October 1974 until 1981, Kia Motors manufactured a pick up variant of the second generation Familia as the "Kia Brisa" at their first integrated automobile manufacturing facility,

11952-438: The podium. This time, three of the Mazdas retired, with the fourth claiming the fifth position. Mazda also turned its attention to Le Mans in 1970 with rotary-powered prototypes. The company finally won that race 21 years later with the 787B . From October 1974 until 1981, Kia Motors manufactured a pick up variant of the second generation Familia as the "Kia Brisa" at their first integrated automobile manufacturing facility,

12096-482: The previous generation 1200 model in most markets. In Finland, the Familia Presto was marketed as the "Mazda Marella." The sedan and coupé were updated in 1972 in Japan and in the autumn of 1973 for export market, but the truck and wagon/van versions continued with little change. The vans and pickup trucks actually soldiered on until 1978, by which time a wagon version of the succeeding FA4 Familia (323/GLC) had been introduced. The later pickup versions were also available in

12240-482: The previous generation 1200 model in most markets. In Finland, the Familia Presto was marketed as the "Mazda Marella." The sedan and coupé were updated in 1972 in Japan and in the autumn of 1973 for export market, but the truck and wagon/van versions continued with little change. The vans and pickup trucks actually soldiered on until 1978, by which time a wagon version of the succeeding FA4 Familia (323/GLC) had been introduced. The later pickup versions were also available in

12384-465: The price of the newer model, but still more expensive than Toyota Kijang and Suzuki Carry "minibuses" as the country imposed 30% tax for sedans. In the past hatchback and wagon were classified as sedan Indonesia, but then revised as "minibus" in early 2000s. This changes boosting the sales of hatchbacks and started the downfall of sedans popularity in Indonesia. Around this time, a coachbuilder company called PT. Marvia Graha Motor (owned by Marvy Apandi,

12528-465: The price of the newer model, but still more expensive than Toyota Kijang and Suzuki Carry "minibuses" as the country imposed 30% tax for sedans. In the past hatchback and wagon were classified as sedan Indonesia, but then revised as "minibus" in early 2000s. This changes boosting the sales of hatchbacks and started the downfall of sedans popularity in Indonesia. Around this time, a coachbuilder company called PT. Marvia Graha Motor (owned by Marvy Apandi,

12672-437: The production of private cars (a luxury in Japan at the time), the first Familia was initially only available as a commercial two-door wagon called the Familia van. The van was joined in April 1964 by a plusher Familia wagon, in October by a four-door sedan, and in November by a two-door sedan. The "flat deck" design of the sedan versions was reportedly inspired by the Chevrolet Corvair . Private car versions received foglights in

12816-471: The range received a light facelift including a chrome strip around the front grille. Unlike the truck, the vans also used the "Familia Presto" name. Chassis codes are SPCV for the 1.0-litre and STBV for the 1.3-litre, with power outputs as for the sedan/coupé. Standard and Deluxe versions were available, with the Deluxe also offering five-door bodywork. The Familia was exported as the "Mazda 1300", and replaced

12960-418: The range received a light facelift including a chrome strip around the front grille. Unlike the truck, the vans also used the "Familia Presto" name. Chassis codes are SPCV for the 1.0-litre and STBV for the 1.3-litre, with power outputs as for the sedan/coupé. Standard and Deluxe versions were available, with the Deluxe also offering five-door bodywork. The Familia was exported as the "Mazda 1300", and replaced

13104-457: The relevant cells. Data is for models as marketed in the Japanese domestic market. The new Familia appeared in November 1967 with the same pushrod 987 cc engine as used in the previous generation sedans. It was sold as the "Mazda 1000" in some markets. In July 1968 the rotary-engined version (R100) was introduced, along with a new coupé bodywork which was also available with the 1200 cc piston engine. After an April 1970 facelift (called

13248-457: The relevant cells. Data is for models as marketed in the Japanese domestic market. The new Familia appeared in November 1967 with the same pushrod 987 cc engine as used in the previous generation sedans. It was sold as the "Mazda 1000" in some markets. In July 1968 the rotary-engined version (R100) was introduced, along with a new coupé bodywork which was also available with the 1200 cc piston engine. After an April 1970 facelift (called

13392-399: The same four-headlight nose as the rotary model. For 1975, power dropped as emissions rules became stricter, but the range was expanded to include the four-door sedan and five-door station wagon models. Mazda was still a small player in the United States and noted in their catalog that not all models were available in every state. Engine: For 1976 and 1977, the 1.3 L version was sold as

13536-454: The second generation Familia ended in January 1977, but not before another minor facelift and emissions scrubbing had taken place in February 1976. This changes were not applied for export market. After this change, only the larger engine with lean-burn technology was available in the home market, now with 72 PS (53 kW; 71 hp) (JIS gross) and labelled Familia Presto 1300AP (for "Anti Pollution"). The Familia AP (323 in most of

13680-454: The second generation Familia ended in January 1977, but not before another minor facelift and emissions scrubbing had taken place in February 1976. This changes were not applied for export market. After this change, only the larger engine with lean-burn technology was available in the home market, now with 72 PS (53 kW; 71 hp) (JIS gross) and labelled Familia Presto 1300AP (for "Anti Pollution"). The Familia AP (323 in most of

13824-422: The sedan continued until November 1967, while the van versions continued until they were replaced in February 1968. Around 400,000 of the first Familias were built, 130,473 of which were sedans and coupés. Around 10,000 of the first generation Familias were exported, mainly to Australia and Oceania. Primary sources below are listed at the head of each column, information sourced elsewhere is referenced directly in

13968-422: The sedan continued until November 1967, while the van versions continued until they were replaced in February 1968. Around 400,000 of the first Familias were built, 130,473 of which were sedans and coupés. Around 10,000 of the first generation Familias were exported, mainly to Australia and Oceania. Primary sources below are listed at the head of each column, information sourced elsewhere is referenced directly in

14112-755: The smaller Brisa, based on the Familia Presto . The early cars had rectangular lights, but in December 1976 an updated version with single round headlights was introduced, called the Kia K303. A station wagon model of the K303 was added in 1978. Production ended in 1981, when the license expired. As part of a nationwide industrial plan Kia was then excluded from building passenger cars until 1986. The Brisa II and K-303 are exceedingly rare today (as are classic cars generally in South Korea). As of 2019, there

14256-565: The success of the Cosmo Sports at Nürburgring in 1968, Mazda decided to race another rotary car. The Familia Rotary coupé won its first outing, at the Grand Prix of Singapore , in April 1969. Next, the company took on the touring car endurance challenge at Spa , the Spa 24 Hours . For 1969, Mazda entered a pair of Familia Rotary coupés. The cars came fifth and sixth the first year after

14400-399: The success of the Cosmo Sports at Nürburgring in 1968, Mazda decided to race another rotary car. The Familia Rotary coupé won its first outing, at the Grand Prix of Singapore , in April 1969. Next, the company took on the touring car endurance challenge at Spa , the Spa 24 Hours . For 1969, Mazda entered a pair of Familia Rotary coupés. The cars came fifth and sixth the first year after

14544-524: The summer of 1978, aside from the 1.3 losing two horsepower along the way. In July 1968 Mazda added a Familia Rotary model to the range, offered in both two-door coupé and four-door sedan variants. Sedan models were given an additional "SS" nameplate. The Familia Rotary was powered by a 982 cc 10A Wankel rotary engine and the coupé version was sold outside Japan as the "Mazda R100". After an April 1970 update (known colloquially in Australia as

14688-467: The summer of 1978, aside from the 1.3 losing two horsepower along the way. In July 1968 Mazda added a Familia Rotary model to the range, offered in both two-door coupé and four-door sedan variants. Sedan models were given an additional "SS" nameplate. The Familia Rotary was powered by a 982 cc 10A Wankel rotary engine and the coupé version was sold outside Japan as the "Mazda R100". After an April 1970 update (known colloquially in Australia as

14832-485: The tax structures suited it. Chassis codes were BD1011/BD1031/BD1051 depending on the engine installed. Engines: The most powerful version was marketed as the "323 GT" in European markets. The Familia/323 underwent a facelift in January 1983. Mazda Familia#FA2 The Mazda Familia ( Japanese: マツダ ファミリア , Matsuda Famiria ) , also marketed prominently as the Mazda 323 , Mazda Protegé and Mazda Allegro ,

14976-467: The touring car category there and preventing the GT-R from winning 50 consecutive races. The cars continued to be competitive, claiming over 100 victories by 1976. A special edition "V100" model was released for sale in Japan to commemorate this occasion. Many vehicles continue in club racing to this day. In Australia the RX-3 proved very successful both on and off the race track. One of many RX-3s racing in

15120-405: The trims and seat belts. Notably the radio antenna was enhanced by a twin post (rather than single) design. The 1974 model kept the three spoke plastic wood grain steering wheel; the 1975 received a fake leather wheel with slots cut into its three spokes. The new 12A single distributor engine output was 130 PS (96 kW) and 156 N⋅m (115 lb⋅ft). 0–60 mph (0–97 km/h) time

15264-553: The wagons continued to 1986, when a new front-wheel-drive model was introduced. Originally available with the 1.3- TC and 1.4-liter UC engines, in export markets the larger unit was replaced with the new 1.5-liter E5 engine for the 1983 model year. For the United States, the GLC, advertised as the Great Little Car, was only offered with one engine at a time. The new GLC overlapped with the old-style Mizer for part of 1977 and

15408-437: The wagons continued to 1986, when a new front-wheel-drive model was introduced. Originally available with the 1.3- TC and 1.4-liter UC engines, in export markets the larger unit was replaced with the new 1.5-liter E5 engine for the 1983 model year. For the United States, the GLC, advertised as the Great Little Car, was only offered with one engine at a time. The new GLC overlapped with the old-style Mizer for part of 1977 and

15552-535: The world, GLC for "Great Little Car" in North America) debuted in January 1977 as a rear-wheel-drive subcompact, replacing both the Grand Familia (818) and the preceding Familia (1000/1300). There was a choice of hatchbacks and station wagon bodies, both available with a three- or five-door bodystyle. The station wagon version was a bit later, first being introduced in June 1978, which also meant that

15696-410: The world, GLC for "Great Little Car" in North America) debuted in January 1977 as a rear-wheel-drive subcompact, replacing both the Grand Familia (818) and the preceding Familia (1000/1300). There was a choice of hatchbacks and station wagon bodies, both available with a three- or five-door bodystyle. The station wagon version was a bit later, first being introduced in June 1978, which also meant that

15840-420: Was 10.8 seconds, and the car ran a 17.7 second quarter-mile (400 m). Federalized cars (for the United States) produce 90 hp (67 kW) at 6000 rpm and 94 lb⋅ft (127 N⋅m) at 4000 rpm. The Japanese market Savanna was updated visually in June 1973, though drive lines weren't updated until later in the year. Mazda put the new 12A "AP" single-distributor engine in the RX-3 in late 1973. It

15984-528: Was a single such car registered in the entire country. The name Mazda Savanna (sometimes incorrectly spelled "Savannah") was used on the rotary -powered model sold in Japan, as a coupe, sedan, and wagon. Internationally it was called the Mazda RX-3. It was smaller and sportier than its brother, the Capella Rotary/RX-2 , and was largely identical to its conventional inline-four donor model,

16128-414: Was also rebranded as the Ford Laser and Ford Meteor in Asia, Oceania, Southern Africa, some Latin American countries and, from 1991, as the Ford Escort and Mercury Tracer in North America. In addition, the Familia name was used as the Mazda Familia Wagon/Van , a badge-engineered version of the Nissan AD wagon (1994–2017) and Toyota Probox (2018–present). Mazda Familias were manufactured in

16272-404: Was also a better equipped GLX version available. The Baby Boomers was a lightly facelifted variant with new bumpers and a rear spoiler, for a more sporty appearance overall. The 1990s versions built by Indomobil have modernized headlights (same as on the Mazda 626 (GC) , while Vantrend adopted the pre-facelift North American market quad headlights version) and bumpers. These alterations mean that

16416-404: Was also a better equipped GLX version available. The Baby Boomers was a lightly facelifted variant with new bumpers and a rear spoiler, for a more sporty appearance overall. The 1990s versions built by Indomobil have modernized headlights (same as on the Mazda 626 (GC) , while Vantrend adopted the pre-facelift North American market quad headlights version) and bumpers. These alterations mean that

16560-488: Was available in several body variants: Several of these were available in multiple trim levels. Engines: In Australia the 1.3 had 45 kW (61 PS; 60 hp) at 5700 rpm while the bigger 1.4, introduced in July 1978, offered 48 kW (65 PS; 64 hp) at a somewhat lower engine speed of 5500 rpm. The 1.4 was accompanied by the new, better-equipped CS model which was only available with five-door bodywork. Van engines: A five-speed manual gearbox

16704-488: Was available in several body variants: Several of these were available in multiple trim levels. Engines: In Australia the 1.3 had 45 kW (61 PS; 60 hp) at 5700 rpm while the bigger 1.4, introduced in July 1978, offered 48 kW (65 PS; 64 hp) at a somewhat lower engine speed of 5500 rpm. The 1.4 was accompanied by the new, better-equipped CS model which was only available with five-door bodywork. Van engines: A five-speed manual gearbox

16848-467: Was available with either three or five doors, although most export markets only received the five-door version. From April 1970, the Presto nameplate was added into the entire Familia range, "Presto" means "quick" in Italian. Brand new overhead camshaft 1.3-liter TC engine also appeared, derived from the smaller 1.0-liter OHC engine already seen in the first generation Familia coupé. At the same time,

16992-412: Was available with either three or five doors, although most export markets only received the five-door version. From April 1970, the Presto nameplate was added into the entire Familia range, "Presto" means "quick" in Italian. Brand new overhead camshaft 1.3-liter TC engine also appeared, derived from the smaller 1.0-liter OHC engine already seen in the first generation Familia coupé. At the same time,

17136-405: Was discontinued at home. Mazda's automotive plans for the early sixties consisted of growing alongside the Japanese economy. To achieve this goal, they began by building an extremely affordable kei car , the R360 in 1960, planning on introducing gradually larger and pricier cars as the Japanese customers became able to afford them. As a preview, testing the waters, a larger "Mazda 700" prototype

17280-425: Was intended for commercial use there) received either BPCV or BPBV chassis codes, signifying three- or five-door versions. The Familia Presto Van, with OHC engines, received chassis numbers MP3xV/SP3xV for the 1000 (3-door/5-door) and MT2xV/ST2xV for the 1200. The five-door Van range was gradually expanded downwards as the three-door models dropped in popularity. The Familia Presto Van continued largely unchanged until

17424-425: Was intended for commercial use there) received either BPCV or BPBV chassis codes, signifying three- or five-door versions. The Familia Presto Van, with OHC engines, received chassis numbers MP3xV/SP3xV for the 1000 (3-door/5-door) and MT2xV/ST2xV for the 1200. The five-door Van range was gradually expanded downwards as the three-door models dropped in popularity. The Familia Presto Van continued largely unchanged until

17568-400: Was introduced later as an alternative to the original four-speed manual gearbox. At the same time the original 7-inch (178 mm) round sealed beam headlights were replaced with square sealed beam units on all models except the van, together with a general styling and mechanical upgrade. A three-speed automatic gearbox was also available on the bigger engined models, it was first introduced (on

17712-400: Was introduced later as an alternative to the original four-speed manual gearbox. At the same time the original 7-inch (178 mm) round sealed beam headlights were replaced with square sealed beam units on all models except the van, together with a general styling and mechanical upgrade. A three-speed automatic gearbox was also available on the bigger engined models, it was first introduced (on

17856-469: Was marketed to a new kind of youthful Japanese consumer, and sold very well at home as well as abroad. Nonetheless, the cars traditional rear-wheel-drive underpinnings limited interior space and betrayed themselves in having a very narrow track when compared to the body. The FA4 was somewhat of an interim solution while Mazda worked on a front-wheel-drive car, but still managed to sell around 890,000 examples in its three full years of production. In June 1979,

18000-469: Was marketed to a new kind of youthful Japanese consumer, and sold very well at home as well as abroad. Nonetheless, the cars traditional rear-wheel-drive underpinnings limited interior space and betrayed themselves in having a very narrow track when compared to the body. The FA4 was somewhat of an interim solution while Mazda worked on a front-wheel-drive car, but still managed to sell around 890,000 examples in its three full years of production. In June 1979,

18144-495: Was more and more sold on price. The Mazda 808 was sold in the U.S. from 1972 through 1977. This name was given only to the 1.6 L version of the Grand Familia. The 808 cost $ 2,997, which was some $ 200 above the Honda Civic and Toyota Corolla . It was originally only available with two-door coupé bodywork. The car came with a four-speed manual or three-speed automatic transmission (available through 1974). Early models used

18288-414: Was one of the first Mazda cars imported into the United States for the new Mazda Motors of America, sold in model years 1971 and 1972. Due to US regulations it was released in North America with round headlights fitted in place of the rectangular lights fitted in all other markets. It was a surprising hit with the American public, though sales were limited to some Northwestern states initially. Following on

18432-414: Was one of the first Mazda cars imported into the United States for the new Mazda Motors of America, sold in model years 1971 and 1972. Due to US regulations it was released in North America with round headlights fitted in place of the rectangular lights fitted in all other markets. It was a surprising hit with the American public, though sales were limited to some Northwestern states initially. Following on

18576-404: Was produced through 1980 before being replaced by the next-generation GLC. The marketing campaign in the U.S. had the words "Great Little Car" set to the tune of Spanish Flea . Thanks to the safety bumpers mandated by federal regulations, the 1979 base GLC three-door weighed in at 1,995 lb (905 kg) and was 154.3 in (3,920 mm) long. The station wagon continued to be offered until

18720-404: Was produced through 1980 before being replaced by the next-generation GLC. The marketing campaign in the U.S. had the words "Great Little Car" set to the tune of Spanish Flea . Thanks to the safety bumpers mandated by federal regulations, the 1979 base GLC three-door weighed in at 1,995 lb (905 kg) and was 154.3 in (3,920 mm) long. The station wagon continued to be offered until

18864-502: Was promoted and marketed as the "Widebody" in Japan. These changes were made only to the sedans and coupé, while the van/wagon and trucks remained in production and retaining the original narrower bodywork with minor changes. The Familia Presto continued using the "Mazda 1000/1300" name in most export markets, "Mazda Marella" name was also retained in Finland. The Rotary Presto sedan/coupé was discontinued in Japan, having been replaced by

19008-447: Was promoted and marketed as the "Widebody" in Japan. These changes were made only to the sedans and coupé, while the van/wagon and trucks remained in production and retaining the original narrower bodywork with minor changes. The Familia Presto continued using the "Mazda 1000/1300" name in most export markets, "Mazda Marella" name was also retained in Finland. The Rotary Presto sedan/coupé was discontinued in Japan, having been replaced by

19152-504: Was refreshed again in 1975 with a "REAPS-5" engine. In 1976 the Series III Savanna / RX-3 was released in Japan and the U.S., but exports to Australia and New Zealand ceased. The nose cone wore a new lower spoiler-type lip, and the rotor shaped badge was replaced with a new Mazda corporate font badge on the grille, offset to the left of centre. Overall these and other detail changes made the cars much plainer, and certainly lost

19296-445: Was relocated in these updated engines from the top of the engine to the lower left hand rear side. Other internal 12A changes included moving from dual row side seals to single row and significant changes to apex seal design. The Series II was slower than the 10A Series I down the quarter mile even with the 1,146 cc 12A' s greater capacity and 15 percent more power. The Rotary Engine Anti Pollution System ( REAPS ) hurt torque. As

19440-607: Was replaced with the Mazda RX-4 . Mazda Familia The Mazda Familia ( Japanese: マツダ ファミリア , Matsuda Famiria ) , also marketed prominently as the Mazda 323 , Mazda Protegé and Mazda Allegro , is a small family car that was manufactured by Mazda between 1963 and 2003. The Familia line was replaced by the Mazda3 /Axela for 2004. It was marketed as the Familia in Japan, which means "family" in Latin. For export, earlier models were sold with nameplates including: "800", "1000", "1200", and "1300". In North America,

19584-433: Was shown at the eighth Tokyo Motor Show in 1961, and formed the basis for the upcoming Mazda Familia. Meanwhile, the four door version of the R360 was introduced as the Mazda Carol , which appeared in 1962, and discontinued in 1964. The first production Familia, styled by a young Giorgetto Giugiaro while working at Carrozzeria Bertone , appeared in October 1963. In line with Mazda's policy of only gradually approaching

19728-487: Was sold as the Mazda RX-3 internationally when installed with the rotary engine and was otherwise largely identical to the inline-four-equipped Mazda Grand Familia. Externally the Savanna and export RX-3 was differentiated from its piston engines sibling by a nose panel with dual round headlights and a more prominent and pointed honeycomb grille, and round tail lights on the rear of sedans and coupés. A station wagon version,

19872-408: Was terminated because the production quality was below VW Group's standard. The fourth generation Familia (BD), first shown on 2 June 1980, was entirely new – it was Mazda's first front-engine, front-wheel-drive subcompact car , and was available as a hatchback and sedan. It was developed with input from Ford , which in 1979 had acquired a stake in the Japanese manufacturer, and had a twin called

20016-408: Was terminated because the production quality was below VW Group's standard. The fourth generation Familia (BD), first shown on 2 June 1980, was entirely new – it was Mazda's first front-engine, front-wheel-drive subcompact car , and was available as a hatchback and sedan. It was developed with input from Ford , which in 1979 had acquired a stake in the Japanese manufacturer, and had a twin called

20160-425: Was the first piston-powered Familia sold in the United States and arrived in two- and four-door forms alongside its rotary Mazda R100 coupé counterpart. It was replaced by the somewhat larger 808 (Grand Familia) the next year. The 1200 model returned for 1973 as the base-model economy Mazda. The company then focused on performance for the next two years, dropping the economy car. After the gas crisis they returned to

20304-425: Was the first piston-powered Familia sold in the United States and arrived in two- and four-door forms alongside its rotary Mazda R100 coupé counterpart. It was replaced by the somewhat larger 808 (Grand Familia) the next year. The 1200 model returned for 1973 as the base-model economy Mazda. The company then focused on performance for the next two years, dropping the economy car. After the gas crisis they returned to

20448-503: Was the most powerful engine to be installed in the FA-series Familia/323. It arrived in early 1979, but period testers felt that the less-revvy 1.6 provided very little that the 1.4 did not offer, and could not be considered to be worth the price. Fuel consumption dropped, while top speed of 148 km/h (92 mph) was only marginally higher than the 145 km/h (90 mph) of the smaller version. Sigma also fielded

20592-430: Was the most powerful engine to be installed in the FA-series Familia/323. It arrived in early 1979, but period testers felt that the less-revvy 1.6 provided very little that the 1.4 did not offer, and could not be considered to be worth the price. Fuel consumption dropped, while top speed of 148 km/h (92 mph) was only marginally higher than the 145 km/h (90 mph) of the smaller version. Sigma also fielded

20736-463: Was the world's first rotary-powered station wagon. In September 1972 the Savanna GT went on sale exclusively in Japan. This model received the larger 12A motor with 125 PS (92 kW) and was coupled to a five speed transmission. Along with this came slightly lowered suspension, as well as wider 5.5" rims. It received revised tail lights and a 5 Speed badge on the rear, an RE12 badge on

#717282