Misplaced Pages

#377622

67-760: The Dodge Spirit is a midsize automobile marketed by Dodge from the 1989 to the 1995 model years. The singular successor of the Dodge Aries , Dodge Lancer , and the Dodge 600 (initially marketed alongside the former), the Spirit was slotted between the Shadow and the Dynasty within the Dodge product line. In contrast to its predecessors, the Spirit was sold exclusively as a four-door notchback sedan. The Spirit used

134-604: A vehicle size class which originated in the United States and is used for cars larger than compact cars and smaller than full-size cars . "Large family car" is a UK term and a part of the D-segment in the European car classification. Mid-size cars are manufactured in a variety of body styles, including sedans , coupes , station wagons , hatchbacks , and convertibles . Compact executive cars can also fall under

201-413: A 1.5-liter OHV straight-4 with four valves per cylinder as far back as 1914 but did not use this engine until after World War I . It produced appr. 30 bhp (22.4 kW) at 2700 rpm (15.4 kW/liter or 0.34 bhp/cid). In the 1920 Voiturettes Grand Prix at Le Mans driver Ernest Friderich finished first in a Bugatti Type 13 with the 16-valve engine, averaging 91.96 km/h. Even more successful

268-549: A 360.8 cid (5.8-liter) straight-4 (0.22 bhp per cubic inch). Over 2300 of these powerful early multi-valve engines were built. Stutz not only used them in their famous Bearcat sportscar but in their standard touring cars as well. The mono block White Motor Car engine developed 72 horsepower and less than 150 were built, only three are known to exist today. In 1919 Pierce-Arrow introduced its 524.8 cid (8.6-liter) straight-6 with 24 valves. The engine produced 48.6 bhp (0.09 bhp per cubic inch) and ran very quietly, which

335-862: A four valve per cylinder engine was the 1973 Triumph Dolomite Sprint . This Triumph used an in-house developed SOHC 16-valve 1,998 cc (122 ci) straight-4 engine that produced 127 bhp (47.6 kW/liter, 1.10 bhp/cid) at introduction. The 1975 Chevrolet Cosworth Vega featured a DOHC multi-valve head designed by Cosworth Engineering in the UK. This 122-cubic-inch straight-4 produced 110 bhp (82 kW; 112 PS) at 5600 rpm (0.90 bhp/cid; 41.0 kW/liter) and 107 lb⋅ft (145 N⋅m) at 4800 rpm. The 1976 Fiat 131 Abarth (51.6 kW/liter), 1976 Lotus Esprit with Lotus 907 engine (54.6 kW/liter, 1.20 bhp/cid), and 1978 BMW M1 with BMW M88 engine (58.7 kW/liter, 1.29 bhp/cid) all used four valves per cylinder. The BMW M88/3 engine

402-467: A four-valve design. The three-valve design was common in the late 1980s and early 1990s; and from 2004 the main valve arrangement used in Ford F-Series trucks, and Ford SUVs. The Ducati ST3 V-twin had 3-valve heads. This is the most common type of multi-valve head, with two exhaust valves and two similar (or slightly larger) inlet valves. This design allows similar breathing as compared to

469-433: A four-valve engine, a five-valve design should have a higher maximum RPM, and the three inlet ports should give efficient cylinder-filling and high gas turbulence (both desirable traits), it has been questioned whether a five-valve configuration gives a cost-effective benefit over four-valve designs. The rise of direct injection may also make five-valve heads more difficult to engineer, as the injector must take up some space on

536-472: A more advanced MPFI setup. The MPFI 2.5 improved performance and driveability, as well as achieved cleaner emissions than its TBI counterpart, but was not used in the U.S., Canadian, or rest-of-world export markets except on turbocharged and FFV models. The Chrysler Spirit with MPFI 2.5 L engine was sold in Mexico from 1991 through 1995, and was exported to Argentina and Brazil from 1993 through 1995. It

603-632: A multi-valved Golf GTI 16V . The 16-valve 1.8-liter straight-4 produced 139 PS (102 kW; 137 bhp) or 56.7 kW/liter, almost 25% up from the 45.6 kW/liter for the previous 8-valve Golf GTI engine. The GM Quad 4 multi-valve engine family debuted early 1987. The Quad 4 was the first mainstream multi-valve engine to be produced by GM after the Chevrolet Cosworth Vega . The NA Quad 4 achieved 1.08 bhp (1 kW; 1 PS) per cubic inch (49.1 kW/liter). Such engines soon became common as Japanese manufacturers adopted

670-528: A rallying legend in the 1970s winning many domestic and World Championship events. Other cars claiming to be first are the Jensen Healey , launched in 1972 which used a Lotus 907 belt-driven DOHC 16-valve 2-liter straight-4 producing 140 bhp (54.6 kW/liter, 1.20 bhp/cid). All of these, although mass-produced, are also of relatively limited production, so it is argued that the first widely available and popularly priced mass-production car with

737-408: A slight increase in torque. For homologation Evolution I (1989) and Evolution II (1990) models were produced that had a redesigned engine to allow for a higher rev limit and improved top-end power capabilities. The Evo II engine offered 235 PS (173 kW; 232 hp) from 2463 cc (70.2 kW/liter). Saab introduced a 16-valve head to their 2.0-liter (1985 cc) straight-4 in 1984 and offered

SECTION 10

#1732797160378

804-610: A split-plane crankshaft rather than the Ferrari-type flat-plane. The engine was constructed by Ducati rather than Ferrari, and was produced from 1986 through 1991. The Quattrovalvole was also used by Lancia for their attempt at the World Sportscar Championship with the LC2 . The engine was twin-turbocharged and destroked to 2.65 litres, but produced 720 hp (537 kW) in qualifying trim. The engine

871-407: A three-valve head, and as the small exhaust valves allow high RPM, this design is very suitable for high power outputs. Less common is the five-valve head, with two exhaust valves and three inlet valves. All five valves are similar in size. This design allows excellent breathing, and, as every valve is small, high RPM and very high power outputs are theoretically available. Although, compared to

938-469: A two-valve design, Toyota and Yamaha changed the 4A-GE to a four-valve after a year of evaluation. It produced 115-140 bhp (86-104 kW) at 6,600 rpm (54.2-65.5 kW/liter) and 109 lb⋅ft (148 N⋅m) at 5,800 rpm. To compensate for the reduced air speed of a multi-valve engine at low rpms, the first-to-second generation engines included the T-VIS intake system. In 1986 Volkswagen introduced

1005-464: Is also used to improve engine performance. The 1908 Ariès VT race cars had 1.4 litre supercharged single cylinder engines with four valve per cylinder desmodromic systems. (Source: [1] ) The 1910 Isotta-Fraschini Tipo KM had a 10.6 litre inline 4 with single overhead camshaft and four valves per cylinder and it had one of the first engines with fully enclosed overhead valve gear (source: Isotta Fraschini Tipo KM [1] and [2] ) The first motorcar in

1072-695: The BMW M5 . It could reach 60 mph (97 km/h) in 5.8 seconds, according to Car and Driver , making it one of the quickest front wheel drive cars ever offered in the American market. It was chosen as Motor Trend magazine's "Domestic Sport Sedan of the Year", beating the Ford Taurus SHO for 1991 and 1992. All R/Ts were built in Mexico. A total of 1,208 were sold in the U.S. in 1991 – 774 in red and 434 in white. An additional 191 were sold in

1139-812: The Chrysler AA platform , an extended-wheelbase variation of the Chrysler K platform . A design used across all three Chrysler divisions, the Spirit was marketed with alongside the Plymouth Acclaim and the 1990-1994 Chrysler LeBaron sedan. The model line was exported to Europe under the Chrysler Saratoga nameplate. Chrysler assembled the Spirit alongside the Acclaim and LeBaron sedan at Newark Assembly ( Newark, Delaware ) and Toluca Car Assembly ( Toluca , Mexico ). The final example

1206-662: The Ford LTD II and the Plymouth Fury . A comparison test by Popular Science of four intermediate sedans (the 1976 AMC Matador, Chevrolet Malibu , Ford Torino, and Dodge Coronet ) predicted that these will be the "big cars of the future." By 1978, General Motors made its intermediate models smaller. New "official" size designations in the U.S. were introduced by the EPA , which defined market segments by passenger and cargo space. Formerly mid-sized cars that were built on

1273-533: The Mazda B8-ME ) use a single fork-shaped rocker arm to drive two valves (generally the exhaust valves) so that fewer cam lobes will be needed in order to reduce manufacturing costs. This has a single large exhaust valve and two smaller intake valves. A three-valve layout allows better breathing than a two-valve head, but the large exhaust valve results in an RPM limit no higher than a two-valve head. The manufacturing cost for this design can be lower than for

1340-793: The R-series engines, the Mazda B8-ME , and the Chrysler 3.5 L V6 engine . The V12 engines of many World War II fighter aircraft also used a SOHC configuration with four valves for each cylinder. The 1993 Mercedes-Benz C-Class (OM604 engine) was the first 4-valve diesel-engined car. Peugeot had a triple overhead cam five-valve Grand Prix car in 1921. In April 1988 an Audi 200 Turbo Quattro powered by an experimental 2.2-liter turbocharged 25-valve straight-5 rated at 478 kW/650 PS@6,200 rpm (217.3 kW/liter) set two world speed records at Nardo , Italy: 326.403 km/h (202.8 mph) for 1,000 km (625 miles) and 324.509 km/h (201.6 mph) for 500 miles. Mitsubishi were

1407-572: The Stutz Motor Company introduced a 322 cid (5.3-liter) dual camshaft 32-valve straight-8 with 156 bhp (116 kW) at 3900 rpm, called DV-32. The engine offered 0.48 bhp per cubic inch. About 100 of these multi-valve engines were built. Stutz also used them in their top-of-the-line sportscar, the DV-32 Super Bearcat that could reach 100 mph (160 km/h). The 1935 Duesenberg SJ Mormon Meteor's engine

SECTION 20

#1732797160378

1474-513: The 190 E 2.3-16 produced 49 hp (36 kW) and 41 ft•lbf (55 N•m) of torque more than the basic single overhead cam 2.3 straight-4 engine on which it was based offering 185 hp (138 kW) at 6,200 rpm (59.2 kW/liter) and 174 lb⋅ft (236 N⋅m) at 4,500 rpm. In 1988 an enlarged 2.5-liter engine replaced the 2.3-liter. It offered double valve timing chains to fix the easily snapping single chains on early 2.3 engines, and increased peak output by 17 bhp (12.5 kW) with

1541-437: The 1917 Stutz straight-4, White Motor Car Model GL 327 CID Dual Valve Mononblock four, and 1919 Pierce-Arrow straight-6 engines. The standard flathead engines of that day were not very efficient and designers tried to improve engine performance by using multiple valves. The Stutz Motor Company used a modified T-head with 16 valves, twin-spark ignition and aluminium pistons to produce 80 bhp (59 kW) at 2400 rpm from

1608-510: The 1920s when these DOHC engines came to Alfa road cars like the Alfa Romeo 6C . In 1916 US automotive magazine Automobile Topics described a four-cylinder, four-valve-per-cylinder car engine made by Linthwaite-Hussey Motor Co. of Los Angeles, CA, USA: "Firm offers two models of high-speed motor with twin intakes and exhausts." . Early multi-valve engines in T-head configuration were

1675-438: The 1922 Type 29 Grand Prix racer and the legendary Type 35 of 1924. Both Type 29 and Type 35 had a 100 bhp (75 kW) 2-liter SOHC 24-valve NA straight-8 that produced 0.82 bhp (0.61 kW) per cubic inch. A.L.F.A. 40/60 GP was a fully working early racing car prototype made by the company now called Alfa Romeo . Only one example was built in 1914, which was later modified in 1921. This design of Giuseppe Merosi

1742-413: The 2.5 L engine. In 1993, 1994, and 1995, a flexible-fuel Spirit was offered, powered by a 107 hp (80 kW; 108 PS) multipoint fuel injected version of the 2.5 L engine specially modified to run on fuel containing up to 85% methanol . The R/T version came with a powerful 2.2 L (135 cu in) DOHC turbo III with cylinder head engineered and made by Lotus . This engine

1809-733: The Dodge brand at the time was used only on trucks. The Spirit was introduced in the Mexican market for 1990, one year after its début in the U.S. and Canada. The 1990-1991 Mexican versions were equipped with the U.S. market Plymouth Acclaim tail lights. The initial 1990-model Spirits used a version of the 2.5 L engine operating on leaded gasoline , equipped with a carburetor , a tubular exhaust header , and electronic control of ignition timing. This induction and ignition system used technology and components very similar to those employed in Chrysler's U.S.-market Lean Burn emission control systems of

1876-636: The Frankfurt Auto Show in September 1983 after it set a world record at Nardo, Italy, recording a combined average speed of 154.06 mph (247.94 km/h) over the 50,000 km (31,000 mi) endurance test. The engine was based on the 2.3-liter 8-valve 136 hp (101 kW) unit already fitted to the 190- and E-Class series. Cosworth developed the DOHC light alloy cast cylinder head with four large valves per cylinder. In roadgoing trim,

1943-534: The Spirit. The Spirit ES and R/T featured Eurocast (also called Snowflake ) alloy wheels through 1991. For 1992, the Turbo Blade wheel was introduced. Some of the alloy wheels were color-keyed to the vehicle body: Starting in 1993, the Spirit was offered with a Gold package similar to that offered on the 1993-94 Plymouth Acclaim and Dodge Caravan / Plymouth Voyager minivans. This included goldtone-trimmed alloy wheels and gold pinstripes. The Gold package

2010-647: The U.S. in 1992 – 92 red, 68 white, and 31 silver. The only discernible changes for 1992 were a lower first gear ratio for reduced turbo lag , woodgrain dashboard trim as used on the Chrysler LeBaron sedan, blacked-out upper and lower grille inserts, clear rather than amber lenses for the front parking and turn signal lights, and a speedometer calibrated to 150 mph (240 km/h) rather than 120 mph (190 km/h). Spirits were marketed in Mexico . They were badged as Chryslers rather than Dodges, since

2077-586: The added cost of a DOHC valve train . The Ford design uses one spark plug per cylinder located in the centre, but the Mercedes design uses two spark plugs per cylinder located on opposite sides, leaving the centre free to add a direct-to-cylinder fuel injector at a later date. The 1989 Citroën XM was the first 3-valve diesel-engined car. Examples of SOHC four-valve engines include the Honda F-series engines, D-series engines, all J-series engines,

Dodge Spirit - Misplaced Pages Continue

2144-501: The danger of valve float . Some engines are designed to open each intake valve at a slightly different time, which increases turbulence, improving the mixing of air and fuel at low engine speeds. More valves also provide additional cooling to the cylinder head. The disadvantages of multi-valve engines are an increase in manufacturing cost and a potential increase in oil consumption due to the greater number of valve stem seals. Some single overhead camshaft (SOHC) multi-valve engines (such as

2211-462: The electronic four-speed A604 overdrive automatic, which became optional equipment in 1992 and remained optional until 1995. The three-speed Torqueflite automatic was the most popular installation on 4-cylinder Spirits, and was also standard equipment with the V6 engine from 1992 through 1995. A 5-speed manual was offered with the V6 engine in the smaller Shadow , but this combination was not available in

2278-552: The engine with and without turbocharger (65.5 kW/liter and 47.9 kW/liter respectively) in the Saab 900 and Saab 9000 . The 2.0-liter Nissan FJ20 was one of the earliest straight-4 mass-produced Japanese engines to have both a DOHC 16-valve configuration (four valves per cylinder, two intake, two exhaust) and electronic fuel injection (EFI) when released in October 1981 in the sixth generation Nissan Skyline . Peak output

2345-669: The first appears to have been the 1969 Nissan Skyline , using the Nissan S20 six cylinder DOHC four-valve engine. This engine was also fitted to Nissan Fairlady Z432 racing edition. For a four-cylinder engine, the first mass-produced car using a four valves per cylinder engine was the British Ford Escort RS1600 , this car used the Cosworth BDA engine which was a Ford 'Kent' block with a Cosworth 16 valve twin cam cylinder head. The car went on to become

2412-415: The flow of intake and exhaust gases, thereby enhancing combustion , volumetric efficiency , and power output . Multi-valve geometry allows the spark plug to be ideally located within the combustion chamber for optimal flame propagation. Multi-valve engines tend to have smaller valves that have lower reciprocating mass , which can reduce wear on each cam lobe, and allow more power from higher RPM without

2479-525: The full-size cars of a decade or so ago ... best sellers include Ford Torino , Chevrolet Chevelle , AMC Matador , Plymouth Satellite ..." The domestic manufacturers began changing the definition of "medium" as they developed new models for an evolving market place. A turning point occurred in the late 1970s, when rising fuel costs and government fuel economy regulations caused all car classes to shrink, and in many cases to blur. Automakers moved previously "full-size" nameplates to smaller platforms such as

2546-493: The head. After making five-valve Genesis engines for several years, Yamaha has since reverted to the cheaper four-valve design. Examples of the five-valve engines are the various 1.8 L 20vT engines manufactured by AUDI AG, the later versions of the Ferrari Dino V8 , and the 1.6 L 20-valve 4A-GE engine made by Toyota in collaboration with Yamaha. For a cylindrical bore and equal-area sized valves, increasing

2613-551: The late-1970s. For the 1991 model year , Mexico enacted new-vehicle emission regulations similar to those in the U.S. and Canada. The carbureted leaded-fuel engine was too dirty to comply with the new regulations, so a fully integrated engine management system with fuel injection was added to the Spirit. This was not the TBI system used in the U.S., Canada, and Europe . Rather, the Mexican-market Spirits came with

2680-522: The mid-size category. The automobile that defined this size in the United States was the Rambler Six that was introduced in 1956, although it was called a "compact" car at that time. Much smaller than any standard contemporary full-size cars, it was called a compact to distinguish it from the small imported cars that were being introduced into the marketplace. By the early 1960s, the car

2747-937: The mid-size market for decades. Mid-size cars were the most popular category of cars sold in the United States, with 27.4 percent during the first half of 2012, ahead of crossovers at 19 percent. The United States Environmental Protection Agency (EPA) Fuel Economy Regulations for 1977 and Later Model Year (dated July 1996) includes definitions for classes of automobiles. Based on the combined passenger and cargo volume, mid-size cars are defined as having an interior volume index of 110–119 cu ft (3.1–3.4 m ). Multi-valve A multi-valve engine design has three, four, or five valves per cylinder to achieve improved performance. In automotive engineering , any four-stroke internal combustion engine needs at least two valves per cylinder: one for intake of air (and often fuel ), and another for exhaust of combustion gases. Adding more valves increases valve area and improves

Dodge Spirit - Misplaced Pages Continue

2814-414: The mid-size market segment as the line of cars themselves kept increasing in size. By 1965, these GM "A platform" mid-size models matched the size of 1955 full-size cars. During the 1970s, the intermediate class in the U.S. was generally defined as vehicles with wheelbases between 112 inches (2,845 mm) and 118 inches (2,997 mm). Once again, the cars grew and by 1974 they were "about as large as

2881-513: The multi-valve concept. The 1975 Honda Civic introduced Honda's 1.5-liter SOHC 12-valve straight-4 engines. Nissan's 1988–1992 SOHC KA24E engine had three valves per cylinder (two intakes, one exhaust) as well. Nissan upgraded to DOHC after 1992 for some of their sports cars, including the 240SX . In 1988, Renault released a 12 valve version of its Douvrin 4 cylinder 2.0l SOHC. Mercedes and Ford produced three-valve V6 and V8 engines, Ford claiming an 80% improvement in high RPM breathing without

2948-913: The number of valves beyond five decreases the total valve area. The following table shows the effective areas of differing valve quantities as proportion of cylinder bore. These percentages are based on simple geometry and do not take into account orifices for spark plugs or injectors, but these voids will usually be sited in the "dead space" unavailable for valves. Also, in practice, intake valves are often larger than exhaust valves in heads with an even number of valves-per-cylinder: Turbocharging and supercharging are technologies that also improve engine breathing, and can be used instead of, or in conjunction with, multi-valve engines. The same applies to variable valve timing and variable-length intake manifolds . Rotary valves also offer improved engine breathing and high rev performance but these were never very successful. Cylinder head porting , as part of engine tuning ,

3015-592: The original 300 PS (221 kW; 296 hp) 3.0-liter version the Toyota 7 engine participated in endurance races as a 5.0-liter (4,968 cc) non-turbo V8 with DOHC and 32-valves. It produced 600 PS (441 kW; 592 hp) at 8,000 rpm (88.8 kW/liter) and 55.0 kg⋅m (539 N⋅m; 398 lb⋅ft) at 6,400 rpm. There is much discussion about which was the first 'mass-produced' car to use an engine with four valves per cylinder. For six cylinder engines, and considering special versions of mass-produced cars,

3082-744: The red, white, and silver offered in the U.S. All Mexican-market Spirit R/Ts were badged as Chryslers. A variant of the R/T family, the Chrysler Phantom R/T , was a special-order Mexico-only premium version of the LeBaron coupe equipped with the 2.2 L 16-valve DOHC engine and the Getrag 5-speed manual transmission. Rebadged models, mostly from Japanese or Korean manufacturers – Rebadged Chrysler/Plymouth models for external markets Mid-size car Mid-size —also known as intermediate —is

3149-531: The same 2.2 L 16-valve DOHC engine that was used in the American-market from 1991 to 1992 R/T with a 5-speed manual transmission. More options and higher equipment levels were available in Mexico, including leather upholstery, sunroof, and 16-inch alloy wheels, none of which was offered on the R/T in America. In addition, Mexican-market R/Ts could be ordered in a variety of different colors, not just

3216-679: The same platform, like the AMC Matador sedan, had a combined passenger and cargo volume of 130 cubic feet (3.68 m ), and were now considered "full-size" automobiles. Cars that defined the mid-size market in the 1980s and 1990s included the Chrysler K-Cars ( Dodge Aries and Plymouth Reliant ), the Ford Taurus , and the Toyota Camry , which was upsized into the midsize class in 1991. The Taurus and Camry came to define

3283-402: The spark plugs. Only two cars were built. Ferrari developed their Quattrovalvole (or QV) engines in the 80s. Four valves per cylinder were added for the 1982 308 and Mondial Quattrovalvole , bringing power back up to the pre- FI high of 245 hp (183 kW) . A very unusual Dino Quattrovalvole was used in the 1986 Lancia Thema 8.32 . It was based on the 308 QV's engine, but used

3350-516: The world speed record of 170 km/h. Robert Peugeot also commissioned the young Ettore Bugatti to develop a GP racing car for the 1912 Grand Prix. This chain-driven Bugatti Type 18 had a 5-litre straight-4 with SOHC and three valves per cylinder (two inlet, one exhaust). It produced appr. 100 bhp (75 kW; 101 PS) at 2800 rpm (0.30 bhp per cubic inch) and could reach 99 mph (159 km/h). The three-valve head would later be used for some of Bugatti's most famous cars, including

3417-551: The world to have an engine with two overhead camshafts and four valves per cylinder was the 1912 Peugeot L76 Grand Prix race car designed by Ernest Henry . Its 7.6-litre monobloc straight-4 with modern hemispherical combustion chambers produced 148 bhp (110 kW) (19.5 HP/Liter(0.32 bhp per cubic inch)). In April 1913, on the Brooklands racetrack in England, a specially built L76 called "la Torpille" (torpedo) beat

SECTION 50

#1732797160378

3484-464: Was 148 hp (110 kW) at 6,000 rpm and 133 lb⋅ft (180 N⋅m) at 4,800 rpm. The FJ20 was also offered with a turbocharger, producing 188 hp (140 kW) at 6,400 rpm and 166 lb⋅ft (225 N⋅m) at 4,800 rpm. Following Nissan's lead, Toyota released the 1.6-liter (1,587 cc) 4A-GE engine in 1983. The cylinder head was developed by Yamaha Motor Corporation and was built at Toyota's Shimayama plant. While originally conceived of as

3551-605: Was Bugattis clean sweep of the first four places at Brescia in 1921. In honour of this memorable victory all 16-valve-engined Bugattis were dubbed Brescia . From 1920 through 1926 about 2000 were built. Peugeot had a triple overhead cam 5-valve Grand Prix car in 1921. Bentley used multi-valve engines from the beginning. The Bentley 3 Litre , introduced in 1921, used a monobloc straight-4 with aluminium pistons, pent-roof combustion chambers , twin spark ignition, SOHC, and four valves per cylinder. It produced appr. 70 bhp (0.38 bhp per cubic inch). The 1927 Bentley 4½ Litre

3618-528: Was a 2.5 L (150 cu in) TBI 4-cylinder engine producing 100 hp (75 kW; 101 PS). Optional on all models except the Spirit R/T was a 141 hp (105 kW; 143 PS), 3.0 L (180 cu in) L V6 made by Mitsubishi . Also available in 1989 through 1992—and standard equipment on the Spirit ES—was a 150 hp (112 kW; 152 PS) turbocharged version of

3685-468: Was a 419.6 cid (6.9-liter) straight-8 with DOHC, 4 valves per cylinder and a supercharger. It achieved 400 bhp (298.3 kW) at 5,000 rpm and 0.95 bhp per cubic inch. The 1937 Mercedes-Benz W125 racing car used a supercharged 5.7-liter straight-8 with DOHC and four valves per cylinder. The engine produced 592-646 bhp (441.5-475 kW) at 5800 rpm and achieved 1.71-1.87 bhp per cubic inch (77.8-85.1 kW/liter). The W125 top speed

3752-486: Was a heavy-duty A568 5-speed manual transmission built by Chrysler's New Process Gear division, with a gearset supplied by Getrag . Heavy-duty vented four wheel disc brakes were standard equipment, with optional anti-lock brakes . Color-keyed 15-inch alloy wheels were standard, with P205/60R15 tires. At the time, the R/T was advertised as "the fastest sedan made in America", and one of the quickest performance sedans under $ 40,000, with Chrysler placing its performance above

3819-531: Was an asset to the bootleggers of that era. Multi-valve engines continued to be popular in racing and sports engines. Robert M. Roof, the chief engineer for Laurel Motors, designed his multi-valve Roof Racing Overheads early in the 20th century. Type A 16-valve heads were successful in the teens, Type B was offered in 1918 and Type C 16-valve in 1923. Frank Lockhart drove a Type C overhead cam car to victory in Indiana in 1926. Bugatti also had developed

3886-484: Was appr. 200 mph (322 km/h). The 1967 Cosworth DFV F1 engine, a NA 3.0-liter V8 producing appr. 400 bhp (298 kW; 406 PS) at 9,000 rpm (101.9 kW/liter), featured four valves per cylinder. For many years it was the dominant engine in Formula One, and it was also used in other categories, including CART , Formula 3000 and Sportscar racing . Debuting at the 1968 Japanese Grand Prix in

3953-634: Was available with both 4- and 6-cylinder models, with certain body colors. In 1991, Chrysler introduced the Spirit R/T , featuring a version of the 2.2 L engine with a 16-valve DOHC head designed by Lotus , who won a design competition against Maserati and Hans Hermann. Fed by a Garrett intercooled turbocharger , the Turbo III engine produced 224 hp (167 kW; 227 PS) and 217 lb⋅ft (294 N⋅m). The R/T also featured unique interior and exterior trims. The only transmission

4020-590: Was employed by the Argentine police in Buenos Aires . Chrysler de Mexico also sold two versions of the Spirit R/T. The base R/T, sold from 1991 through 1995, used a Mexico-only 168 hp (125 kW; 170 PS) intercooled Turbo II version of the 8-valve SOHC 2.5 L engine and the 3-speed A413 automatic transmission. These R/Ts were used by Mexican police departments. The top-line R/T. called "R/T DOHC", available from 1992 through 1993, came with

4087-497: Was later increased to 3.0 litres and increased power output to 828 hp (617 kW). The 1984 Ferrari Testarossa had a 4.9-liter flat-12 with four valves per cylinder. Almost 7,200 Testarossa were produced between 1984 and 1991. In 1985 Lamborghini released a Countach Quattrovalvole , producing 455 PS (335 kW; 449 hp) from a 5.2-liter (5167 cc) Lamborghini V12 engine (64.8 kW/liter). The Mercedes-Benz 190E 2.3-16 with 16-valve engine debuted at

SECTION 60

#1732797160378

4154-492: Was of similar engine design. The NA racing model offered 130 bhp (0.48 bhp per cubic inch) and the 1929 supercharged 4½ Litre (Blower Bentley) reached 240 bhp (0.89 bhp per cubic inch). The 1926 Bentley 6½ Litre added two cylinders to the monobloc straight-4. This multi-valve straight-6 offered 180-200 bhp (0.45-0.50 bhp per cubic inch). The 1930 Bentley 8 Litre multi-valve straight-6 produced appr. 220 bhp (0.45 bhp per cubic inch). In 1931

4221-517: Was produced on December 9, 1994. For 1995, the Dodge Stratus replaced the Spirit. The Spirit could accommodate six people with an optional front split-bench seat. It had a solid-beam rear axle, and a MacPherson strut front suspension. The Spirit differed from the other A-bodies primarily in the grille and rear lamp styling, and in the availability of a sportier, higher-performing R/T version. The base engine for Spirit and Spirit LE models

4288-515: Was rated at 224 hp (167 kW; 227 PS) and 217 lb⋅ft (294 N⋅m). Several five-speed manual transmissions were available with the naturally aspirated and turbocharged 4-cylinder engines, but relatively few Spirits were equipped with manual transmissions. All the Spirit R/Ts came with the A-568 heavy-duty 5-speed manual transmission. From 1989 to 1991, all V6 Spirits came with

4355-513: Was renamed the Rambler Classic and while it retained its basic dimensions, it was now competing with an array of new "intermediate" models from General Motors, Ford, and Chrysler. The introduction of the 1962 Ford Fairlane was viewed by consumers as too close to the compact Falcon in size and performance as well as too close to the full-sized Ford models in price. It was the introduction of General Motors " senior compacts " that grew

4422-401: Was the first Alfa Romeo DOHC engine. It had four valves per cylinder, 90-degree valve angle and twin-spark ignition. The GP engine had a displacement of 4.5-liter (4490 cc) and produced 88 bhp (66 kW) at 2950 rpm (14.7 kW/liter), and after modifications in 1921 102 bhp (76 kW) at 3000 rpm. The top speed of this car was 88-93 mph (140–149 km/h). It wasn't until

4489-405: Was used in the 1983 BMW M6 35CSi and in the 1985 BMW M5 . The 1978 Porsche 935/78 racer used a twin turbo 3.2-liter flat-6 (845 bhp/630 kW@8,200 rpm; 784 Nm/578 ft.lbs@6,600 rpm). The water-cooled engine featured four valves per cylinder and output a massive 196.2 kW/liter. Porsche had to abandon its traditional aircooling because the multi-valve DOHC hampered aircooling of

#377622