114-519: A standard-gauge railway is a railway with a track gauge of 1,435 mm ( 4 ft 8 + 1 ⁄ 2 in ). The standard gauge is also called Stephenson gauge (after George Stephenson ), international gauge , UIC gauge , uniform gauge , normal gauge in Europe, and SGR in East Africa. It is the most widely used track gauge around the world, with about 55% of the lines in
228-453: A carthorse in between the shafts. Research, however, has been undertaken to support the hypothesis that "the origin of the standard gauge of the railway might result from an interval of wheel ruts of prehistoric ancient carriages". In addition, while road-travelling vehicles are typically measured from the outermost portions of the wheel rims, it became apparent that for vehicles travelling on rails, having main wheel flanges that fit inside
342-408: A crank on a driving axle. Steam locomotives have been phased out in most parts of the world for economical and safety reasons, although many are preserved in working order by heritage railways . Electric locomotives draw power from a stationary source via an overhead wire or third rail . Some also or instead use a battery . In locomotives that are powered by high-voltage alternating current ,
456-586: A dining car . Some lines also provide over-night services with sleeping cars . Some long-haul trains have been given a specific name . Regional trains are medium distance trains that connect cities with outlying, surrounding areas, or provide a regional service, making more stops and having lower speeds. Commuter trains serve suburbs of urban areas, providing a daily commuting service. Airport rail links provide quick access from city centres to airports . High-speed rail are special inter-city trains that operate at much higher speeds than conventional railways,
570-731: A fourth rail system in 1890 on the City and South London Railway , now part of the London Underground Northern line . This was the first major railway to use electric traction . The world's first deep-level electric railway, it runs from the City of London , under the River Thames , to Stockwell in south London. The first practical AC electric locomotive was designed by Charles Brown , then working for Oerlikon , Zürich. In 1891, Brown had demonstrated long-distance power transmission, using three-phase AC , between
684-542: A funicular railway at the Hohensalzburg Fortress in Austria. The line originally used wooden rails and a hemp haulage rope and was operated by human or animal power, through a treadwheel . The line is still operational, although in updated form and is possibly the oldest operational railway. Wagonways (or tramways ) using wooden rails, hauled by horses, started appearing in the 1550s to facilitate
798-492: A hydro-electric plant at Lauffen am Neckar and Frankfurt am Main West, a distance of 280 km (170 mi). Using experience he had gained while working for Jean Heilmann on steam–electric locomotive designs, Brown observed that three-phase motors had a higher power-to-weight ratio than DC motors and, because of the absence of a commutator , were simpler to manufacture and maintain. However, they were much larger than
912-431: A steam engine that provides adhesion. Coal , petroleum , or wood is burned in a firebox , boiling water in the boiler to create pressurized steam. The steam travels through the smokebox before leaving via the chimney or smoke stack. In the process, it powers a piston that transmits power directly through a connecting rod (US: main rod) and a crankpin (US: wristpin) on the driving wheel (US main driver) or to
1026-469: A transformer in the locomotive converts the high-voltage low-current power to low-voltage high current used in the traction motors that power the wheels. Modern locomotives may use three-phase AC induction motors or direct current motors. Under certain conditions, electric locomotives are the most powerful traction. They are also the cheapest to run and provide less noise and no local air pollution. However, they require high capital investments both for
1140-594: A country (for example, 1,440 mm or 4 ft 8 + 11 ⁄ 16 in to 1,445 mm or 4 ft 8 + 7 ⁄ 8 in in France). The first tracks in Austria and in the Netherlands had other gauges ( 1,000 mm or 3 ft 3 + 3 ⁄ 8 in in Austria for the Donau Moldau line and 1,945 mm or 6 ft 4 + 9 ⁄ 16 in in
1254-489: A deck system of access to shopping and other facilities, employing the Swedish Skarne method of construction. Originally named Killingworth Township, the latter part was quickly dropped through lack of colloquial use. Killingworth is referred to as 'Killy' by many residents of the town and surrounding areas. Around 1964, during the reclamation of the derelict pit sites, a 15-acre (6.1 ha) lake south of
SECTION 10
#17327875480731368-550: A diesel locomotive from the company in 1909. The world's first diesel-powered locomotive was operated in the summer of 1912 on the Winterthur–Romanshorn railway in Switzerland, but was not a commercial success. The locomotive weight was 95 tonnes and the power was 883 kW with a maximum speed of 100 km/h (62 mph). Small numbers of prototype diesel locomotives were produced in a number of countries through
1482-478: A double track plateway, erroneously sometimes cited as world's first public railway, in south London. William Jessop had earlier used a form of all-iron edge rail and flanged wheels successfully for an extension to the Charnwood Forest Canal at Nanpantan , Loughborough, Leicestershire in 1789. In 1790, Jessop and his partner Outram began to manufacture edge rails. Jessop became a partner in
1596-633: A filming location for the 1973 BBC sitcom Whatever Happened to the Likely Lads? , with one of the houses on Agincourt on the Highfields estate featuring as the home of Bob and Thelma Ferris . In an episode of the architecture series Grundy's Wonders on Tyne Tees , John Grundy deemed Killingworth's former British Gas Research Centre to be the best industrial building in the North East. The Doctor Who episode titled " The Mark of
1710-975: A former mining community, formed on 760 acres (310 ha) of derelict colliery land near Killingworth Village . The building of Killingworth Township was undertaken by Northumberland County Council and was not formally a 'New Town' sponsored by the Government . Unlike that town, Killingworth's planners adopted a radical approach to town centre design, resulting in relatively high-rise buildings in an avant-garde and brutalist style that won awards for architecture, dynamic industry and attractive environment. This new town centre consisted of pre-cast concrete houses, with millions of small crustacean shells unusually embedded into their external walls, 5 to 10-storey flats , offices, industrial units and service buildings, which often consisted of artistic non-functional characteristics, shops and residential multi-storey car parks, interconnected by ramps and walkways . These made up
1824-442: A lack of fieldwork in the area. Subsequent mining, spoil heaps and landscaping disturbed the stratigraphy and damaged or destroyed artifacts. Documentary evidence for Killingworth starts in 1242 when it is recorded as part of the land held by Roger de Merlay III. There were nine recorded taxpayers in 1296, falling to eight by 1312. In a survey of the township dated 1373 listed sixteen tenements (land holdings). Other enclosed land
1938-437: A large turning radius in its design. While high-speed rail is most often designed for passenger travel, some high-speed systems also offer freight service. Since 1980, rail transport has changed dramatically, but a number of heritage railways continue to operate as part of living history to preserve and maintain old railway lines for services of tourist trains. A train is a connected series of rail vehicles that move along
2052-498: A larger locomotive named Galvani , exhibited at the Royal Scottish Society of Arts Exhibition in 1841. The seven-ton vehicle had two direct-drive reluctance motors , with fixed electromagnets acting on iron bars attached to a wooden cylinder on each axle, and simple commutators . It hauled a load of six tons at four miles per hour (6 kilometers per hour) for a distance of one and a half miles (2.4 kilometres). It
2166-423: A locomotive. This involves one or more powered vehicles being located at the front of the train, providing sufficient tractive force to haul the weight of the full train. This arrangement remains dominant for freight trains and is often used for passenger trains. A push–pull train has the end passenger car equipped with a driver's cab so that the engine driver can remotely control the locomotive. This allows one of
2280-493: A new KFC and public house ('The Shire Horse') were constructed next to McDonald's in Killingworth Centre. The White Swan was a large white building in the town centre. It was originally owned by Merz & McLellan and built in the 1960s. It contains 100,000 square feet (10,000 m ) of office space and employed 600 professional and clerical people. It was constructed by Northumberland County Council , and
2394-477: A number of trains per hour (tph). Passenger trains can usually be into two types of operation, intercity railway and intracity transit. Whereas intercity railway involve higher speeds, longer routes, and lower frequency (usually scheduled), intracity transit involves lower speeds, shorter routes, and higher frequency (especially during peak hours). Intercity trains are long-haul trains that operate with few stops between cities. Trains typically have amenities such as
SECTION 20
#17327875480732508-676: A piece of circular rail track in Bloomsbury , London, the Catch Me Who Can , but never got beyond the experimental stage with railway locomotives, not least because his engines were too heavy for the cast-iron plateway track then in use. The first commercially successful steam locomotive was Matthew Murray 's rack locomotive Salamanca built for the Middleton Railway in Leeds in 1812. This twin-cylinder locomotive
2622-465: A pivotal role in the development and widespread adoption of the steam locomotive. His designs considerably improved on the work of the earlier pioneers. He built the locomotive Blücher , also a successful flanged -wheel adhesion locomotive. In 1825 he built the locomotive Locomotion for the Stockton and Darlington Railway in the northeast of England, which became the first public steam railway in
2736-439: A revival in recent decades due to road congestion and rising fuel prices, as well as governments investing in rail as a means of reducing CO 2 emissions . Smooth, durable road surfaces have been made for wheeled vehicles since prehistoric times. In some cases, they were narrow and in pairs to support only the wheels. That is, they were wagonways or tracks. Some had grooves or flanges or other mechanical means to keep
2850-739: A single lever to control both engine and generator in a coordinated fashion, and was the prototype for all diesel–electric locomotive control systems. In 1914, world's first functional diesel–electric railcars were produced for the Königlich-Sächsische Staatseisenbahnen ( Royal Saxon State Railways ) by Waggonfabrik Rastatt with electric equipment from Brown, Boveri & Cie and diesel engines from Swiss Sulzer AG . They were classified as DET 1 and DET 2 ( de.wiki ). The first regular used diesel–electric locomotives were switcher (shunter) locomotives . General Electric produced several small switching locomotives in
2964-510: A standard gauge of 4 ft 8 + 1 ⁄ 2 in ( 1,435 mm ), and those in Ireland to a new standard gauge of 5 ft 3 in ( 1,600 mm ). In Great Britain, Stephenson's gauge was chosen on the grounds that existing lines of this gauge were eight times longer than those of the rival 7 ft or 2,134 mm (later 7 ft 1 ⁄ 4 in or 2,140 mm ) gauge adopted principally by
3078-407: A standard. Following SNCF's successful trials, 50 Hz, now also called industrial frequency was adopted as standard for main-lines across the world. Earliest recorded examples of an internal combustion engine for railway use included a prototype designed by William Dent Priestman . Sir William Thomson examined it in 1888 and described it as a "Priestman oil engine mounted upon a truck which
3192-632: A terminus about one-half mile (800 m) away. A funicular railway was also made at Broseley in Shropshire some time before 1604. This carried coal for James Clifford from his mines down to the River Severn to be loaded onto barges and carried to riverside towns. The Wollaton Wagonway , completed in 1604 by Huntingdon Beaumont , has sometimes erroneously been cited as the earliest British railway. It ran from Strelley to Wollaton near Nottingham . The Middleton Railway in Leeds , which
3306-507: A two-tier walkway (see gallery). This design could be seen on maps of the Towers imprinted on the cast-iron drain covers within the estate. The walkways all led to a 1 ⁄ 4 -mile-long (400 m) elevated walkway leading straight through the mostly covered Killingworth Citadel Shopping Centre. This communal configuration was experimental and somewhat typical of the time. The concept was to create community interaction, with large parks in
3420-408: A wheel. This was a large stationary engine , powering cotton mills and a variety of machinery; the state of boiler technology necessitated the use of low-pressure steam acting upon a vacuum in the cylinder, which required a separate condenser and an air pump . Nevertheless, as the construction of boilers improved, Watt investigated the use of high-pressure steam acting directly upon a piston, raising
3534-410: Is a single, self-powered car, and may be electrically propelled or powered by a diesel engine . Multiple units have a driver's cab at each end of the unit, and were developed following the ability to build electric motors and other engines small enough to fit under the coach. There are only a few freight multiple units, most of which are high-speed post trains. Steam locomotives are locomotives with
Standard-gauge railway - Misplaced Pages Continue
3648-766: Is currently operated by the Ghana Railway Company Limited . Kojokrom-Sekondi Railway Line (The Kojokrom-Sekondi line is a branch line that joins the Western Railway Line at Kojokrom ) Indian nationwide rail system ( Indian Railways ) uses 1,676 mm ( 5 ft 6 in ) broad gauge. 96% of the broad gauge network is electrified. The railway tracks of Java and Sumatra use 1,067 mm ( 3 ft 6 in ). Planned and under construction high-speed railways to use 1,668 mm ( 5 ft 5 + 21 ⁄ 32 in ) to maintain interoperability with
3762-399: Is dominant. Electro-diesel locomotives are built to run as diesel–electric on unelectrified sections and as electric locomotives on electrified sections. Alternative methods of motive power include magnetic levitation , horse-drawn, cable , gravity, pneumatics and gas turbine . A passenger train stops at stations where passengers may embark and disembark. The oversight of the train is
3876-426: Is equivalent to 1,435.1 mm. As railways developed and expanded, one of the key issues was the track gauge (the distance, or width, between the inner sides of the rails) to be used. Different railways used different gauges, and where rails of different gauge met – a " gauge break " – loads had to be unloaded from one set of rail cars and reloaded onto another, a time-consuming and expensive process. The result
3990-408: Is usually provided by diesel or electrical locomotives . While railway transport is capital-intensive and less flexible than road transport, it can carry heavy loads of passengers and cargo with greater energy efficiency and safety. Precursors of railways driven by human or animal power have existed since antiquity, but modern rail transport began with the invention of the steam locomotive in
4104-556: Is worked on a temporary line of rails to show the adaptation of a petroleum engine for locomotive purposes." In 1894, a 20 hp (15 kW) two axle machine built by Priestman Brothers was used on the Hull Docks . In 1906, Rudolf Diesel , Adolf Klose and the steam and diesel engine manufacturer Gebrüder Sulzer founded Diesel-Sulzer-Klose GmbH to manufacture diesel-powered locomotives. Sulzer had been manufacturing diesel engines since 1898. The Prussian State Railways ordered
4218-607: The Liverpool and Manchester Railway , authorised in 1826 and opened 30 September 1830. The extra half inch was not regarded at first as very significant, and some early trains ran on both gauges daily without compromising safety. The success of this project led to Stephenson and his son Robert being employed to engineer several other larger railway projects. Thus the 4 ft 8 + 1 ⁄ 2 in ( 1,435 mm ) gauge became widespread and dominant in Britain. Robert
4332-505: The Tyne and Wear Passenger Transport Executive (Nexus). Killingworth Bus Station is located adjacent to the Killingworth Centre. It is served by Arriva North East , Go North East , and Stagecoach North East with routes to Newcastle upon Tyne , North Tyneside and Northumberland . Killingworth is home to Bailey Green, Grasmere Academy and Amberley primary schools and George Stephenson High School. In recent years Killingworth moved from
4446-692: The United Kingdom at the beginning of the 19th century. The first passenger railway, the Stockton and Darlington Railway , opened in 1825. The quick spread of railways throughout Europe and North America, following the 1830 opening of the first intercity connection in England, was a key component of the Industrial Revolution . The adoption of rail transport lowered shipping costs compared to water transport, leading to "national markets" in which prices varied less from city to city. In
4560-555: The United Kingdom , South Korea , Scandinavia, Belgium and the Netherlands. The construction of many of these lines has resulted in the dramatic decline of short-haul flights and automotive traffic between connected cities, such as the London–Paris–Brussels corridor, Madrid–Barcelona, Milan–Rome–Naples, as well as many other major lines. High-speed trains normally operate on standard gauge tracks of continuously welded rail on grade-separated right-of-way that incorporates
4674-414: The overhead lines and the supporting infrastructure, as well as the generating station that is needed to produce electricity. Accordingly, electric traction is used on urban systems, lines with high traffic and for high-speed rail. Diesel locomotives use a diesel engine as the prime mover . The energy transmission may be either diesel–electric , diesel-mechanical or diesel–hydraulic but diesel–electric
Standard-gauge railway - Misplaced Pages Continue
4788-458: The puddling process in 1784. In 1783 Cort also patented the rolling process , which was 15 times faster at consolidating and shaping iron than hammering. These processes greatly lowered the cost of producing iron and rails. The next important development in iron production was hot blast developed by James Beaumont Neilson (patented 1828), which considerably reduced the amount of coke (fuel) or charcoal needed to produce pig iron. Wrought iron
4902-418: The rotary phase converter , enabling electric locomotives to use three-phase motors whilst supplied via a single overhead wire, carrying the simple industrial frequency (50 Hz) single phase AC of the high-voltage national networks. An important contribution to the wider adoption of AC traction came from SNCF of France after World War II. The company conducted trials at AC 50 Hz, and established it as
5016-487: The 1880s, railway electrification began with tramways and rapid transit systems. Starting in the 1940s, steam locomotives were replaced by diesel locomotives . The first high-speed railway system was introduced in Japan in 1964, and high-speed rail lines now connect many cities in Europe , East Asia , and the eastern United States . Following some decline due to competition from cars and airplanes, rail transport has had
5130-521: The 1930s (the famous " 44-tonner " switcher was introduced in 1940) Westinghouse Electric and Baldwin collaborated to build switching locomotives starting in 1929. In 1929, the Canadian National Railways became the first North American railway to use diesels in mainline service with two units, 9000 and 9001, from Westinghouse. Although steam and diesel services reaching speeds up to 200 km/h (120 mph) were started before
5244-508: The 1960s in Europe, they were not very successful. The first electrified high-speed rail Tōkaidō Shinkansen was introduced in 1964 between Tokyo and Osaka in Japan. Since then high-speed rail transport, functioning at speeds up to and above 300 km/h (190 mph), has been built in Japan, Spain, France , Germany, Italy, the People's Republic of China, Taiwan (Republic of China),
5358-464: The 40 km Burgdorf–Thun line , Switzerland. Italian railways were the first in the world to introduce electric traction for the entire length of a main line rather than a short section. The 106 km Valtellina line was opened on 4 September 1902, designed by Kandó and a team from the Ganz works. The electrical system was three-phase at 3 kV 15 Hz. In 1918, Kandó invented and developed
5472-530: The Butterley Company in 1790. The first public edgeway (thus also first public railway) built was Lake Lock Rail Road in 1796. Although the primary purpose of the line was to carry coal, it also carried passengers. These two systems of constructing iron railways, the "L" plate-rail and the smooth edge-rail, continued to exist side by side until well into the early 19th century. The flanged wheel and edge-rail eventually proved its superiority and became
5586-514: The DC motors of the time and could not be mounted in underfloor bogies : they could only be carried within locomotive bodies. In 1894, Hungarian engineer Kálmán Kandó developed a new type 3-phase asynchronous electric drive motors and generators for electric locomotives. Kandó's early 1894 designs were first applied in a short three-phase AC tramway in Évian-les-Bains (France), which was constructed between 1896 and 1898. In 1896, Oerlikon installed
5700-707: The Garths in West Bailey (the west of Killingworth) were built of concrete and had flat roofs, but around 1995 the Local Housing Association modernised these houses by adding pitched roofs . They renewed fencing, built new brick sheds and relocated roads and pathways. The lowest remaining numbered Garth is Garth Four in West Bailey and the highest is Garth Thirty-Three in East Bailey aka Hadrian court. The housing estate formally known as Garth 21
5814-913: The Great Western Railway. It allowed the broad-gauge companies in Great Britain to continue with their tracks and expand their networks within the "Limits of Deviation" and the exceptions defined in the Act. After an intervening period of mixed-gauge operation (tracks were laid with three rails), the Great Western Railway finally completed the conversion of its network to standard gauge in 1892. In North East England, some early lines in colliery ( coal mining ) areas were 4 ft 8 in ( 1,422 mm ), while in Scotland some early lines were 4 ft 6 in ( 1,372 mm ). The British gauges converged starting from 1846 as
SECTION 50
#17327875480735928-645: The Netherlands for the Hollandsche IJzeren Spoorweg-Maatschappij ), but for interoperability reasons (the first rail service between Paris and Berlin began in 1849, first Chaix timetable) Germany adopted standard gauges, as did most other European countries. The modern method of measuring rail gauge was agreed in the first Berne rail convention of 1886. Several lines were initially built as standard gauge but were later converted to another gauge for cost or for compatibility reasons. 2,295 km (1,426 mi) Victoria built
6042-767: The Rani " depicted Killingworth in the 19th century, with the Sixth Doctor in search of George Stephenson , after the Doctor's archenemy The Master attempts to hijack the Industrial Revolution. Filming of the episode took place in the 19th-century mining village at Blists Hill Open Air Museum in Ironbridge, however. According to Jennifer Morrison there is no recorded evidence of early human activity at Killingworth. She asserts that this may be due in part to
6156-645: The advantages of equipment interchange became increasingly apparent. By the 1890s, the entire network was converted to standard gauge. The Royal Commission made no comment about small lines narrower than standard gauge (to be called "narrow gauge"), such as the Ffestiniog Railway . Thus it permitted a future multiplicity of narrow gauges in the UK. It also made no comments about future gauges in British colonies, which allowed various gauges to be adopted across
6270-499: The building towered over Killingworth. Over the years, the office space became vacant and, like the former Woolco site, was disused through the 1990s. The building was reduced in height, remodernised, reopened and renamed White Swan Centre. The name White Swan was chosen from suggestions provided by local school children and reflects the swans found on the local lake. The White Swan Centre was built to house local services previously provided in demolished buildings that had been attached to
6384-482: The coal mines of County Durham . He favoured 4 ft 8 in ( 1,422 mm ) for wagonways in Northumberland and Durham , and used it on his Killingworth line. The Hetton and Springwell wagonways also used this gauge. Stephenson's Stockton and Darlington railway (S&DR) was built primarily to transport coal from mines near Shildon to the port at Stockton-on-Tees . Opening in 1825,
6498-597: The colonies. Parts of the United States, mainly in the Northeast, adopted the same gauge, because some early trains were purchased from Britain. The American gauges converged, as the advantages of equipment interchange became increasingly apparent. Notably, all the 5 ft ( 1,524 mm ) broad gauge track in the South was converted to "almost standard" gauge 4 ft 9 in ( 1,448 mm ) over
6612-457: The course of two days beginning on 31 May 1886. See Track gauge in the United States . In continental Europe, France and Belgium adopted a 1,500 mm ( 4 ft 11 + 1 ⁄ 16 in ) gauge (measured between the midpoints of each rail's profile ) for their early railways. The gauge between the interior edges of the rails (the measurement adopted from 1844) differed slightly between countries, and even between networks within
6726-430: The duty of a guard/train manager/conductor . Passenger trains are part of public transport and often make up the stem of the service, with buses feeding to stations. Passenger trains provide long-distance intercity travel, daily commuter trips, or local urban transit services, operating with a diversity of vehicles, operating speeds, right-of-way requirements, and service frequency. Service frequencies are often expressed as
6840-402: The end of the 19th century, because they were cleaner compared to steam-driven trams which caused smoke in city streets. In 1784 James Watt , a Scottish inventor and mechanical engineer, patented a design for a steam locomotive . Watt had improved the steam engine of Thomas Newcomen , hitherto used to pump water out of mines, and developed a reciprocating engine in 1769 capable of powering
6954-471: The end of the 19th century, improving the quality of steel and further reducing costs. Thus steel completely replaced the use of iron in rails, becoming standard for all railways. The first passenger horsecar or tram , Swansea and Mumbles Railway , was opened between Swansea and Mumbles in Wales in 1807. Horses remained the preferable mode for tram transport even after the arrival of steam engines until
SECTION 60
#17327875480737068-527: The engine by one power stroke. The transmission system employed a large flywheel to even out the action of the piston rod. On 21 February 1804, the world's first steam-powered railway journey took place when Trevithick's unnamed steam locomotive hauled a train along the tramway of the Penydarren ironworks, near Merthyr Tydfil in South Wales . Trevithick later demonstrated a locomotive operating upon
7182-475: The era of great expansion of railways that began in the late 1860s. Steel rails lasted several times longer than iron. Steel rails made heavier locomotives possible, allowing for longer trains and improving the productivity of railroads. The Bessemer process introduced nitrogen into the steel, which caused the steel to become brittle with age. The open hearth furnace began to replace the Bessemer process near
7296-466: The evidence of rutted roads marked by chariot wheels dating from the Roman Empire . Snopes categorised this legend as "false", but commented that it "is perhaps more fairly labeled as 'Partly true, but for trivial and unremarkable reasons. ' " The historical tendency to place the wheels of horse-drawn vehicles around 5 ft ( 1,524 mm ) apart probably derives from the width needed to fit
7410-522: The first commercial example of the system on the Lugano Tramway . Each 30-tonne locomotive had two 110 kW (150 hp) motors run by three-phase 750 V 40 Hz fed from double overhead lines. Three-phase motors run at a constant speed and provide regenerative braking , and are well suited to steeply graded routes, and the first main-line three-phase locomotives were supplied by Brown (by then in partnership with Walter Boveri ) in 1899 on
7524-739: The first railways to the 5 ft 3 in ( 1,600 mm ) Irish broad gauge. New South Wales then built to the standard gauge, so trains had to stop on the border and passengers transferred, which was only rectified in the 1960s. Queensland still runs on a narrow gauge but there is a standard gauge line from NSW to Brisbane. NMBS/SNCB 3,619 km (2,249 mi) Brussels Metro 40 km (25 mi) Trams in Brussels 140 km (87 mi) 1,032 km (641 mi) The Toronto Transit Commission uses 4 ft 10 + 7 ⁄ 8 in ( 1,495 mm ) gauge on its streetcar and subway lines. Takoradi to Sekondi Route,
7638-423: The grasslands around the towers and adult social clubs. The design did not live up to expectations and the estate started to look and feel like a prison rather than a castle with the introduction of measures to stop anti-social behaviour from youths congregating within the tower instead of in the parks. Grating was retrofitted to prevent risk takers sliding down the 100 ft (30 m) high girders holding up
7752-551: The high-level shopping precinct. For example, a doctors' surgery and library and a small gym was housed in the White Swan centre as the swimming pool and sports centre had also been demolished. The new Lakeside swimming pool and sports centre was built alongside the lake next to George Stephenson High School . Killingworth lies within the remit of the North East Joint Transport Committee and
7866-510: The highest possible radius. All these features are dramatically different from freight operations, thus justifying exclusive high-speed rail lines if it is economically feasible. Killingworth Killingworth is a town in North Tyneside , Tyne and Wear , England, within the historic county of Northumberland . Killingworth was built as a new town in the 1960s, next to Killingworth Village , which existed for centuries before
7980-425: The initial gauge of 4 ft 8 in ( 1,422 mm ) was set to accommodate the existing gauge of hundreds of horse-drawn chaldron wagons that were already in use on the wagonways in the mines. The railway used this gauge for 15 years before a change was made, debuting around 1850, to the 1,435 mm ( 4 ft 8 + 1 ⁄ 2 in ) gauge. The historic Mount Washington Cog Railway ,
8094-1230: The limit being regarded at 200 to 350 kilometres per hour (120 to 220 mph). High-speed trains are used mostly for long-haul service and most systems are in Western Europe and East Asia. Magnetic levitation trains such as the Shanghai maglev train use under-riding magnets which attract themselves upward towards the underside of a guideway and this line has achieved somewhat higher peak speeds in day-to-day operation than conventional high-speed railways, although only over short distances. Due to their heightened speeds, route alignments for high-speed rail tend to have broader curves than conventional railways, but may have steeper grades that are more easily climbed by trains with large kinetic energy. High kinetic energy translates to higher horsepower-to-ton ratios (e.g. 20 horsepower per short ton or 16 kilowatts per tonne); this allows trains to accelerate and maintain higher speeds and negotiate steep grades as momentum builds up and recovered in downgrades (reducing cut and fill and tunnelling requirements). Since lateral forces act on curves, curvatures are designed with
8208-434: The local authority, they were made of dark grey concrete blocks and were named Bamburgh , Kielder and Ford Tower etc., after castles. They consisted of a combination of 1, 2 and 3 storey homes built on top of each other rising to 10 storeys in some towers, with tremendous views. The estate was originally designed to mimic a medieval castle with an outer wall and inner keep connected to lifts and rubbish chutes by ramps and
8322-619: The local authority, were built to house key workers for the British Gas Research Centre. The rest of Killingworth's estates were cul-de-sacs named "Garths" – all numbered, although Garths 1–3 never existed. The numbering was: 4, 6, 7, 9, 11, 12, 13, etc. In the 1990s the Garths located in West Bailey changed their names to street names with estates adopting patterns such as trees (Laburnum Court, Willow Gardens), birds (Dove Close, Chaffinch Way), Farne Islands (Crumstone Court, Longstone, Megstone), etc. The houses in most of
8436-429: The locomotive-hauled train's drawbacks to be removed, since the locomotive need not be moved to the front of the train each time the train changes direction. A railroad car is a vehicle used for the haulage of either passengers or freight. A multiple unit has powered wheels throughout the whole train. These are used for rapid transit and tram systems, as well as many both short- and long-haul passenger trains. A railcar
8550-569: The main portion of the B&;O to the new line to New York through a series of tunnels around the edges of Baltimore's downtown. Electricity quickly became the power supply of choice for subways, abetted by the Sprague's invention of multiple-unit train control in 1897. By the early 1900s most street railways were electrified. The London Underground , the world's oldest underground railway, opened in 1863, and it began operating electric services using
8664-433: The mid-1920s. The Soviet Union operated three experimental units of different designs since late 1925, though only one of them (the E el-2 ) proved technically viable. A significant breakthrough occurred in 1914, when Hermann Lemp , a General Electric electrical engineer, developed and patented a reliable direct current electrical control system (subsequent improvements were also patented by Lemp). Lemp's design used
8778-986: The miner's safety lamp, which he demonstrated underground in Killingworth pit a month before Sir Humphry Davy presented his design to the Royal Society in London in 1815. Known as the Geordie lamp it was to be widely used in the North-east in place of the Davy lamp . The track gauge of the Killingworth tramway was 4 ft 8 in ( 1,422 mm ). Other names were Killingworth Colliery railway , Killingworth Railway and Killingworth wagonway Killingworth originally consisted of local authority houses. The first houses at Angus Close, owned by
8892-467: The new town was built. Other nearby villages include Forest Hall , West Moor and Backworth . Killingworth has bus links to the rest of Tyne and Wear . The town is not on the Tyne and Wear Metro network; its nearest stations are Palmersville and Benton . The town of Killingworth in Australia is named after the British original because of its extensive coal mines. Killingworth was used as
9006-412: The noise they made on the tracks. There are many references to their use in central Europe in the 16th century. Such a transport system was later used by German miners at Caldbeck , Cumbria , England, perhaps from the 1560s. A wagonway was built at Prescot , near Liverpool , sometime around 1600, possibly as early as 1594. Owned by Philip Layton, the line carried coal from a pit near Prescot Hall to
9120-604: The old 4 ft ( 1,219 mm ) plateway was relaid to 5 ft ( 1,524 mm ) so that Blenkinsop's engine could be used. Others were 4 ft 4 in ( 1,321 mm ) (in Beamish ) or 4 ft 7 + 1 ⁄ 2 in ( 1,410 mm ) (in Bigges Main (in Wallsend ), Kenton , and Coxlodge ). English railway pioneer George Stephenson spent much of his early engineering career working for
9234-456: The other, on the North side of West Bailey. This estate, called Highfields, was constructed by Greensit & Barrett with its streets named after notable battles Flodden , Agincourt , Stamford , Culloden and Sedgemoor . The most eye-catching and radical aspect of the township was the 3-tier housing estate called Killingworth Towers – apartment blocks built in the early 1970s. Tenanted by
9348-525: The possibility of a smaller engine that might be used to power a vehicle. Following his patent, Watt's employee William Murdoch produced a working model of a self-propelled steam carriage in that year. The first full-scale working railway steam locomotive was built in the United Kingdom in 1804 by Richard Trevithick , a British engineer born in Cornwall . This used high-pressure steam to drive
9462-435: The rails is better, thus the minimum distance between the wheels (and, by extension, the inside faces of the rail heads ) was the important one. A standard gauge for horse railways never existed, but rough groupings were used; in the north of England none was less than 4 ft ( 1,219 mm ). Wylam colliery's system, built before 1763, was 5 ft ( 1,524 mm ), as was John Blenkinsop 's Middleton Railway ;
9576-410: The rest of the network. All other railways use 1,668 mm ( 5 ft 5 + 21 ⁄ 32 in ) ( broad gauge ) and/or 1,000 mm ( 3 ft 3 + 3 ⁄ 8 in ) metre gauge . BLS , Rigi Railways (rack railway) 449 km Several states in the United States had laws requiring road vehicles to have a consistent gauge to allow them to follow ruts in
9690-399: The road. By the mid-nineteenth century a terrace had appeared, possibly connected with the developing mines in Killingworth and surrounding areas. To the north farms persisted. This pattern of development with 18th and 19th century stone buildings is identifiable today, though with recent infilling. Construction of Killingworth, a new town , began in 1963. Intended for 20,000 people, it was
9804-665: The road. Those gauges were similar to railway standard gauge. Railway Rail transport (also known as train transport ) is a means of transport using wheeled vehicles running in tracks , which usually consist of two parallel steel rails . Rail transport is one of the two primary means of land transport , next to road transport . It is used for about 8% of passenger and freight transport globally, thanks to its energy efficiency and potentially high speed . Rolling stock on rails generally encounters lower frictional resistance than rubber-tyred road vehicles, allowing rail cars to be coupled into longer trains . Power
9918-441: The standard for railways. Cast iron used in rails proved unsatisfactory because it was brittle and broke under heavy loads. The wrought iron invented by John Birkinshaw in 1820 replaced cast iron. Wrought iron, usually simply referred to as "iron", was a ductile material that could undergo considerable deformation before breaking, making it more suitable for iron rails. But iron was expensive to produce until Henry Cort patented
10032-608: The steps of the Puffing Billy pub. The centre included a large department store , Woolco that sold groceries and car parts and even incorporated a tyre service bay. The first two shops in Killingworth in the 1960s were Moore's and a small confectionery shop, situated between Garth Six and Angus Close and adjacent to the West House pub , but these shops were demolished in the 1970s. The shopping centre included Dewhurst butchers, Greggs bakery and newsagents , but it
10146-428: The term "narrow gauge" for gauges less than standard did not arise for many years, until the first such locomotive-hauled passenger railway, the Ffestiniog Railway , was built. In 1845, in the United Kingdom of Great Britain and Ireland , a Royal Commission on Railway Gauges reported in favour of a standard gauge. The subsequent Gauge Act ruled that new passenger-carrying railways in Great Britain should be built to
10260-475: The time, was Liverpool and Manchester Railway , built in 1830. Steam power continued to be the dominant power system in railways around the world for more than a century. The first known electric locomotive was built in 1837 by chemist Robert Davidson of Aberdeen in Scotland, and it was powered by galvanic cells (batteries). Thus it was also the earliest battery-electric locomotive. Davidson later built
10374-674: The town centre was created; spoil heaps were leveled, seeded and planted with semi-mature trees. Today, swans , ducks and local wildlife live around the two lakes, which span the main road into Killingworth. The lake is kept well stocked with fish and an angling club and model boating club regularly use it. Killingworth was home to a number of pits including the world-famous Killingworth Colliery owned by Lord Ravensworth . Ralph Dodds as Chief Viewer managed or trained several people of note during his lifetime including his nephew Isaac Dodds , locomotive engineer George Stephenson , rack railway inventor John Blenkinsop , and Nicholas Wood who
10488-543: The track. Propulsion for the train is provided by a separate locomotive or from individual motors in self-propelled multiple units. Most trains carry a revenue load, although non-revenue cars exist for the railway's own use, such as for maintenance-of-way purposes. The engine driver (engineer in North America) controls the locomotive or other power cars, although people movers and some rapid transits are under automatic control. Traditionally, trains are pulled using
10602-471: The transport of ore tubs to and from mines and soon became popular in Europe. Such an operation was illustrated in Germany in 1556 by Georgius Agricola in his work De re metallica . This line used "Hund" carts with unflanged wheels running on wooden planks and a vertical pin on the truck fitting into the gap between the planks to keep it going the right way. The miners called the wagons Hunde ("dogs") from
10716-418: The walkway to the shops, was eventually demolished as it served no purpose after the Towers' demise, but it stood alone for 10 years until funds were found to bring it down. The land is now occupied by two new estates of privately owned homes built by Cussins Homes and Barratt Homes . The original town centre was built in the 1960s. The boxer Henry Cooper declared the shopping centre open while standing on
10830-423: The walkways. Cast iron grilles were erected to stop transit by over-exuberant youths racing bikes and skateboards along the smooth walkway "racetrack". Dogs fouled the walkways, rubbish chutes were blocked, vandals damaged communal bins, stairwells, lifts and multi-storey residential car parks joined the list of problems. The Towers were never widely popular and were demolished in 1987. The last remaining structure,
10944-629: The wheels on track. For example, evidence indicates that a 6 to 8.5 km long Diolkos paved trackway transported boats across the Isthmus of Corinth in Greece from around 600 BC. The Diolkos was in use for over 650 years, until at least the 1st century AD. Paved trackways were also later built in Roman Egypt . In 1515, Cardinal Matthäus Lang wrote a description of the Reisszug ,
11058-496: The world in 1825, although it used both horse power and steam power on different runs. In 1829, he built the locomotive Rocket , which entered in and won the Rainhill Trials . This success led to Stephenson establishing his company as the pre-eminent builder of steam locomotives for railways in Great Britain and Ireland, the United States, and much of Europe. The first public railway which used only steam locomotives, all
11172-526: The world using it. All high-speed rail lines use standard gauge except those in Russia , Finland , Uzbekistan , and some line sections in Spain . The distance between the inside edges of the rails is defined to be 1,435 mm except in the United States, Canada, and on some heritage British lines, where it is defined in U.S. customary / Imperial units as exactly "four feet eight and one half inches", which
11286-425: The world's first mountain -climbing rack railway , is still in operation in the 21st century, and has used the earlier 4 ft 8 in ( 1,422 mm ) gauge since its inauguration in 1868. George Stephenson introduced the 1,435 mm ( 4 ft 8 + 1 ⁄ 2 in ) gauge (including a belated extra 1 ⁄ 2 in (13 mm) of free movement to reduce binding on curves) for
11400-512: Was a soft material that contained slag or dross . The softness and dross tended to make iron rails distort and delaminate and they lasted less than 10 years. Sometimes they lasted as little as one year under high traffic. All these developments in the production of iron eventually led to the replacement of composite wood/iron rails with superior all-iron rails. The introduction of the Bessemer process , enabling steel to be made inexpensively, led to
11514-489: Was accomplished by the distribution of weight between a number of wheels. Puffing Billy is now on display in the Science Museum in London, and is the oldest locomotive in existence. In 1814, George Stephenson , inspired by the early locomotives of Trevithick, Murray and Hedley, persuaded the manager of the Killingworth colliery where he worked to allow him to build a steam-powered machine. Stephenson played
11628-499: Was built as a private estate with detached and semi-detached 3 and 4 bed room homes. Many Local Authority Homes were purchased by the tenants, some of whom still reside in the houses that were built in the 1960s. In the early 1970s, construction started on two new private estates. One north of East Bailey built by Fisher, called Longmeadows with streets named after the Farne Islands (Knivestone, Goldstone, Crumstone etc.), and
11742-514: Was built by Siemens. The tram ran on 180 volts DC, which was supplied by running rails. In 1891 the track was equipped with an overhead wire and the line was extended to Berlin-Lichterfelde West station . The Volk's Electric Railway opened in 1883 in Brighton , England. The railway is still operational, thus making it the oldest operational electric railway in the world. Also in 1883, Mödling and Hinterbrühl Tram opened near Vienna in Austria. It
11856-706: Was built in 1758, later became the world's oldest operational railway (other than funiculars), albeit now in an upgraded form. In 1764, the first railway in the Americas was built in Lewiston, New York . In the late 1760s, the Coalbrookdale Company began to fix plates of cast iron to the upper surface of the wooden rails. This allowed a variation of gauge to be used. At first only balloon loops could be used for turning, but later, movable points were taken into use that allowed for switching. A system
11970-505: Was demolished in the 1990s. The Puffing Billy Pub was built on a bridge over the road. In the 1980s and 1990s, Morrisons shopping complex (containing Morrisons supermarket) became the commercial centre, while the former Woolco site stood as wasteland for more than a decade. In the early 2000s, Killingworth Centre, a modern shopping mall, was built there. Morrisons moved into a new purpose-built store. The premises vacated by Morrisons are now occupied by Matalan and Home Bargains . In 2010,
12084-548: Was introduced in which unflanged wheels ran on L-shaped metal plates, which came to be known as plateways . John Curr , a Sheffield colliery manager, invented this flanged rail in 1787, though the exact date of this is disputed. The plate rail was taken up by Benjamin Outram for wagonways serving his canals, manufacturing them at his Butterley ironworks . In 1803, William Jessop opened the Surrey Iron Railway ,
12198-426: Was kept as common land; 1,800 acres (730 ha) formed Killingworth Moor. The commoners were the owners of land in Killingworth and Longbenton. Prior to enclosure Newcastle races were held on the moor from the early 17th century. Racing eventually transferred to Newcastle Town Moor. The 1841 Census recorded a population of 112 spread through 14 dwellings. The village consisted of two rows of cottages on both sides of
12312-489: Was light enough to not break the edge-rails track and solved the problem of adhesion by a cog-wheel using teeth cast on the side of one of the rails. Thus it was also the first rack railway . This was followed in 1813 by the locomotive Puffing Billy built by Christopher Blackett and William Hedley for the Wylam Colliery Railway, the first successful locomotive running by adhesion only. This
12426-602: Was reported to have said that if he had had a second chance to choose a gauge, he would have chosen one wider than 4 ft 8 + 1 ⁄ 2 in ( 1,435 mm ). "I would take a few inches more, but a very few". During the " gauge war " with the Great Western Railway , standard gauge was called " narrow gauge ", in contrast to the Great Western's 7 ft 1 ⁄ 4 in ( 2,140 mm ) broad gauge . The modern use of
12540-762: Was tested on the Edinburgh and Glasgow Railway in September of the following year, but the limited power from batteries prevented its general use. It was destroyed by railway workers, who saw it as a threat to their job security. By the middle of the nineteenth century most european countries had military uses for railways. Werner von Siemens demonstrated an electric railway in 1879 in Berlin. The world's first electric tram line, Gross-Lichterfelde Tramway , opened in Lichterfelde near Berlin , Germany, in 1881. It
12654-419: Was the adoption throughout a large part of the world of a "standard gauge" of 1,435 mm ( 4 ft 8 + 1 ⁄ 2 in ), allowing interconnectivity and interoperability. A popular legend that has circulated since at least 1937 traces the origin of the 1,435 mm ( 4 ft 8 + 1 ⁄ 2 in ) gauge even further back than the coalfields of northern England, pointing to
12768-636: Was the first tram line in the world in regular service powered from an overhead line. Five years later, in the U.S. electric trolleys were pioneered in 1888 on the Richmond Union Passenger Railway , using equipment designed by Frank J. Sprague . The first use of electrification on a main line was on a four-mile section of the Baltimore Belt Line of the Baltimore and Ohio Railroad (B&O) in 1895 connecting
12882-415: Was to succeed him as Chief Viewer at Killingworth. In 1814 George Stephenson, enginewright at the colliery, built his first locomotive Blücher with the help and encouragement of his manager, Nicholas Wood, in the colliery workshop behind his house ' Dial Cottage ' on Lime Road. This locomotive could haul 30 long tons (33.6 short tons; 30.5 t) of coal up a hill at 4 mph (6.4 km/h). It
12996-468: Was used to tow coal wagons along the wagonway from Killingworth to the Wallsend coal staithes. Although Blücher did not survive long, it provided Stephenson with the knowledge and experience to build better locomotives for use both at Killingworth and elsewhere. Later he would build the famous Rocket in his locomotive works in Newcastle. At the same time Stephenson was developing his own version of
#72927